From eabbd037f5f605a9ecf06185cd62594eb4564bce Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Mon, 1 May 2017 09:25:30 +0200 Subject: o Adding USB CDC code/support. --- .editorconfig | 11 + .gdbinit | 5 + CMakeLists.txt | 4 +- src/radio-controller.cpp | 18 +- stm32cubemx/.mxproject | 2 +- .../STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_iwdg.h | 299 --- .../STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h | 853 ++++++++ .../Inc/stm32f1xx_hal_pcd_ex.h | 116 + .../STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h | 616 ++++++ .../STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_iwdg.c | 360 ---- .../STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c | 1440 +++++++++++++ .../Src/stm32f1xx_hal_pcd_ex.c | 252 +++ .../STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c | 2211 ++++++++++++++++++++ stm32cubemx/Inc/main.h | 59 +- stm32cubemx/Inc/stm32f1xx_hal_conf.h | 4 +- stm32cubemx/Inc/stm32f1xx_it.h | 2 + stm32cubemx/Inc/usb_device.h | 74 + stm32cubemx/Inc/usbd_cdc_if.h | 132 ++ stm32cubemx/Inc/usbd_conf.h | 186 ++ stm32cubemx/Inc/usbd_desc.h | 114 + .../Class/CDC/Inc/usbd_cdc.h | 179 ++ .../Class/CDC/Src/usbd_cdc.c | 925 ++++++++ .../STM32_USB_Device_Library/Core/Inc/usbd_core.h | 167 ++ .../Core/Inc/usbd_ctlreq.h | 113 + .../STM32_USB_Device_Library/Core/Inc/usbd_def.h | 330 +++ .../STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h | 128 ++ .../STM32_USB_Device_Library/Core/Src/usbd_core.c | 565 +++++ .../Core/Src/usbd_ctlreq.c | 782 +++++++ .../STM32_USB_Device_Library/Core/Src/usbd_ioreq.c | 236 +++ stm32cubemx/Src/main.c | 94 +- stm32cubemx/Src/stm32f1xx_hal_msp.c | 52 +- stm32cubemx/Src/stm32f1xx_it.c | 33 +- stm32cubemx/Src/usb_device.c | 77 + stm32cubemx/Src/usbd_cdc_if.c | 322 +++ stm32cubemx/Src/usbd_conf.c | 754 +++++++ stm32cubemx/Src/usbd_desc.c | 307 +++ stm32cubemx/stm32cubemx.gpdsc | 36 +- stm32cubemx/stm32cubemx.ioc | 48 +- 38 files changed, 11125 insertions(+), 781 deletions(-) create mode 100644 .editorconfig delete mode 100644 stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_iwdg.h create mode 100644 stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h create mode 100644 stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h create mode 100644 stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h delete mode 100644 stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_iwdg.c create mode 100644 stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c create mode 100644 stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c create mode 100644 stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c create mode 100644 stm32cubemx/Inc/usb_device.h create mode 100644 stm32cubemx/Inc/usbd_cdc_if.h create mode 100644 stm32cubemx/Inc/usbd_conf.h create mode 100644 stm32cubemx/Inc/usbd_desc.h create mode 100644 stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h create mode 100644 stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c create mode 100644 stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h create mode 100644 stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h create mode 100644 stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h create mode 100644 stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h create mode 100644 stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c create mode 100644 stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c create mode 100644 stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c create mode 100644 stm32cubemx/Src/usb_device.c create mode 100644 stm32cubemx/Src/usbd_cdc_if.c create mode 100644 stm32cubemx/Src/usbd_conf.c create mode 100644 stm32cubemx/Src/usbd_desc.c diff --git a/.editorconfig b/.editorconfig new file mode 100644 index 0000000..4456701 --- /dev/null +++ b/.editorconfig @@ -0,0 +1,11 @@ +root = true + +[*] +insert_final_newline = true +trim_trailing_whitespace = true +charset = utf-8 +indent_style = space +indent_size = 4 + +[stm32cubemx/**.{h,c}] +indent_size = 2 diff --git a/.gdbinit b/.gdbinit index e2ea19a..3edbdf0 100644 --- a/.gdbinit +++ b/.gdbinit @@ -24,3 +24,8 @@ define run_firmware end target extended-remote :3333 +set confirm off +file build/firmware +hb halt +hb main +disable 2 diff --git a/CMakeLists.txt b/CMakeLists.txt index 2ffe0f9..4097d5a 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -24,7 +24,7 @@ target_sources(firmware PUBLIC thirdparty/mcu.cmake/stm32f103/src/init_low_halt.s thirdparty/mcu.cmake/stm32f103/src/init_low_Reset_Handler.s thirdparty/mcu.cmake/stm32f103/src/breakpoint.s - $ENV{HOME}/opt/STM32CubeMX/Repository/STM32Cube_FW_F1_V1.4.0/Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/startup_stm32f103x6.s + $ENV{HOME}/opt/STM32CubeMX/Repository/STM32Cube_FW_F1_V1.4.0/Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/startup_stm32f103xb.s ) # mcucpp sources @@ -48,7 +48,7 @@ mcu_include_directories_from_sources( EXCLUDE _template.c EXCLUDE Examples EXCLUDE DSP_Lib - EXCLUDE stm32f1xx_it.c +# EXCLUDE stm32f1xx_it.c SOURCES_VAR STM32_CUBEMX_SOURCES HEADERS_VAR STM32_CUBEMX_HEADERS INCLUDES_VAR STM32_CUBEMX_INCLUDES diff --git a/src/radio-controller.cpp b/src/radio-controller.cpp index 53f6ef0..132f581 100644 --- a/src/radio-controller.cpp +++ b/src/radio-controller.cpp @@ -3,14 +3,26 @@ #include #include "mcu/arm/semihosting.h" +#ifdef HAL_IWDG_MODULE_ENABLED +extern IWDG_HandleTypeDef hiwdg; +#endif + void main_pre_init() { - SystemInit(); +// SystemInit(); } void main_post_init() { - semihosting::enable(); + semihosting::enable(); } void main_loop() { - printf("hello world!"); +// printf("hello world!"); + +#ifdef HAL_IWDG_MODULE_ENABLED + HAL_IWDG_Refresh(&hiwdg); +#endif +} + +void it_tim1(TIM_HandleTypeDef *htim1) { + ; } diff --git a/stm32cubemx/.mxproject b/stm32cubemx/.mxproject index f5c6b25..2cb29af 100644 --- a/stm32cubemx/.mxproject +++ b/stm32cubemx/.mxproject @@ -1,5 +1,5 @@ [PreviousLibFiles] -LibFiles=Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_iwdg.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_iwdg.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103x6.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;Drivers/CMSIS/Include/cmsis_armcc_V6.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cmSimd.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/arm_const_structs.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/arm_common_tables.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cmFunc.h;Drivers/CMSIS/Include/core_cmInstr.h;Drivers/CMSIS/Include/arm_math.h;Drivers/CMSIS/Include/core_sc000.h; +LibFiles=Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h;Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h;Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c;Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c;Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103x6.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;Drivers/CMSIS/Include/cmsis_armcc_V6.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cmSimd.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/arm_const_structs.h;Drivers/CMSIS/Include/core_sc300.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/arm_common_tables.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cmFunc.h;Drivers/CMSIS/Include/core_cmInstr.h;Drivers/CMSIS/Include/arm_math.h;Drivers/CMSIS/Include/core_sc000.h; [] SourceFiles=;null; diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_iwdg.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_iwdg.h deleted file mode 100644 index bfd0eda..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_iwdg.h +++ /dev/null @@ -1,299 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_iwdg.h - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief Header file of IWDG HAL module. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2016 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_IWDG_H -#define __STM32F1xx_HAL_IWDG_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal_def.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @addtogroup IWDG - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup IWDG_Exported_Types IWDG Exported Types - * @{ - */ - -/** - * @brief IWDG HAL State Structure definition - */ -typedef enum -{ - HAL_IWDG_STATE_RESET = 0x00, /*!< IWDG not yet initialized or disabled */ - HAL_IWDG_STATE_READY = 0x01, /*!< IWDG initialized and ready for use */ - HAL_IWDG_STATE_BUSY = 0x02, /*!< IWDG internal process is ongoing */ - HAL_IWDG_STATE_TIMEOUT = 0x03, /*!< IWDG timeout state */ - HAL_IWDG_STATE_ERROR = 0x04 /*!< IWDG error state */ - -}HAL_IWDG_StateTypeDef; - -/** - * @brief IWDG Init structure definition - */ -typedef struct -{ - uint32_t Prescaler; /*!< Select the prescaler of the IWDG. - This parameter can be a value of @ref IWDG_Prescaler */ - - uint32_t Reload; /*!< Specifies the IWDG down-counter reload value. - This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */ - -}IWDG_InitTypeDef; - -/** - * @brief IWDG Handle Structure definition - */ -typedef struct -{ - IWDG_TypeDef *Instance; /*!< Register base address */ - - IWDG_InitTypeDef Init; /*!< IWDG required parameters */ - - HAL_LockTypeDef Lock; /*!< IWDG Locking object */ - - __IO HAL_IWDG_StateTypeDef State; /*!< IWDG communication state */ - -}IWDG_HandleTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup IWDG_Exported_Constants IWDG Exported Constants - * @{ - */ - -/** @defgroup IWDG_Registers_BitMask IWDG Registers BitMask - * @brief IWDG registers bit mask - * @{ - */ -/* --- KR Register ---*/ -/* KR register bit mask */ -#define IWDG_KEY_RELOAD ((uint32_t)0xAAAA) /*!< IWDG Reload Counter Enable */ -#define IWDG_KEY_ENABLE ((uint32_t)0xCCCC) /*!< IWDG Peripheral Enable */ -#define IWDG_KEY_WRITE_ACCESS_ENABLE ((uint32_t)0x5555) /*!< IWDG KR Write Access Enable */ -#define IWDG_KEY_WRITE_ACCESS_DISABLE ((uint32_t)0x0000) /*!< IWDG KR Write Access Disable */ - -/** - * @} - */ - -/** @defgroup IWDG_Flag_definition IWDG Flag definition - * @{ - */ -#define IWDG_FLAG_PVU ((uint32_t)IWDG_SR_PVU) /*!< Watchdog counter prescaler value update Flag */ -#define IWDG_FLAG_RVU ((uint32_t)IWDG_SR_RVU) /*!< Watchdog counter reload value update Flag */ - -/** - * @} - */ - -/** @defgroup IWDG_Prescaler IWDG Prescaler - * @{ - */ -#define IWDG_PRESCALER_4 ((uint8_t)0x00) /*!< IWDG prescaler set to 4 */ -#define IWDG_PRESCALER_8 ((uint8_t)(IWDG_PR_PR_0)) /*!< IWDG prescaler set to 8 */ -#define IWDG_PRESCALER_16 ((uint8_t)(IWDG_PR_PR_1)) /*!< IWDG prescaler set to 16 */ -#define IWDG_PRESCALER_32 ((uint8_t)(IWDG_PR_PR_1 | IWDG_PR_PR_0)) /*!< IWDG prescaler set to 32 */ -#define IWDG_PRESCALER_64 ((uint8_t)(IWDG_PR_PR_2)) /*!< IWDG prescaler set to 64 */ -#define IWDG_PRESCALER_128 ((uint8_t)(IWDG_PR_PR_2 | IWDG_PR_PR_0)) /*!< IWDG prescaler set to 128 */ -#define IWDG_PRESCALER_256 ((uint8_t)(IWDG_PR_PR_2 | IWDG_PR_PR_1)) /*!< IWDG prescaler set to 256 */ - -/** - * @} - */ - - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ - -/** @defgroup IWDG_Exported_Macros IWDG Exported Macros - * @{ - */ - -/** @brief Reset IWDG handle state - * @param __HANDLE__: IWDG handle. - * @retval None - */ -#define __HAL_IWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IWDG_STATE_RESET) - -/** - * @brief Enables the IWDG peripheral. - * @param __HANDLE__: IWDG handle - * @retval None - */ -#define __HAL_IWDG_START(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_ENABLE) - -/** - * @brief Reloads IWDG counter with value defined in the reload register - * (write access to IWDG_PR and IWDG_RLR registers disabled). - * @param __HANDLE__: IWDG handle - * @retval None - */ -#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_RELOAD) - - - -/** - * @brief Gets the selected IWDG's flag status. - * @param __HANDLE__: IWDG handle - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg IWDG_FLAG_PVU: Watchdog counter reload value update flag - * @arg IWDG_FLAG_RVU: Watchdog counter prescaler value flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_IWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) - -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ - -/** @defgroup IWDG_Private_Macros IWDG Private Macros - * @{ - */ - - -/** - * @brief Enables write access to IWDG_PR and IWDG_RLR registers. - * @param __HANDLE__: IWDG handle - * @retval None - */ -#define IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_ENABLE) - -/** - * @brief Disables write access to IWDG_PR and IWDG_RLR registers. - * @param __HANDLE__: IWDG handle - * @retval None - */ -#define IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_DISABLE) - - -#define IS_IWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == IWDG_PRESCALER_4) || \ - ((__PRESCALER__) == IWDG_PRESCALER_8) || \ - ((__PRESCALER__) == IWDG_PRESCALER_16) || \ - ((__PRESCALER__) == IWDG_PRESCALER_32) || \ - ((__PRESCALER__) == IWDG_PRESCALER_64) || \ - ((__PRESCALER__) == IWDG_PRESCALER_128)|| \ - ((__PRESCALER__) == IWDG_PRESCALER_256)) - - -#define IS_IWDG_RELOAD(__RELOAD__) ((__RELOAD__) <= 0xFFF) - - -/** - * @} - */ - - - -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup IWDG_Exported_Functions - * @{ - */ - -/** @addtogroup IWDG_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions ********************************/ -HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg); -void HAL_IWDG_MspInit(IWDG_HandleTypeDef *hiwdg); - -/** - * @} - */ - -/** @addtogroup IWDG_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions ****************************************************/ -HAL_StatusTypeDef HAL_IWDG_Start(IWDG_HandleTypeDef *hiwdg); -HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg); - -/** - * @} - */ - -/** @addtogroup IWDG_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State functions ************************************************/ -HAL_IWDG_StateTypeDef HAL_IWDG_GetState(IWDG_HandleTypeDef *hiwdg); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_HAL_IWDG_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h new file mode 100644 index 0000000..9489bd3 --- /dev/null +++ b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd.h @@ -0,0 +1,853 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_pcd.h + * @author MCD Application Team + * @version V1.0.4 + * @date 29-April-2016 + * @brief Header file of PCD HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_PCD_H +#define __STM32F1xx_HAL_PCD_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if defined(STM32F102x6) || defined(STM32F102xB) || \ + defined(STM32F103x6) || defined(STM32F103xB) || \ + defined(STM32F103xE) || defined(STM32F103xG) || \ + defined(STM32F105xC) || defined(STM32F107xC) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_ll_usb.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup PCD + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup PCD_Exported_Types PCD Exported Types + * @{ + */ + +/** + * @brief PCD State structure definition + */ +typedef enum +{ + HAL_PCD_STATE_RESET = 0x00, + HAL_PCD_STATE_READY = 0x01, + HAL_PCD_STATE_ERROR = 0x02, + HAL_PCD_STATE_BUSY = 0x03, + HAL_PCD_STATE_TIMEOUT = 0x04 +} PCD_StateTypeDef; + +#if defined (USB) +/** + * @brief PCD double buffered endpoint direction + */ +typedef enum +{ + PCD_EP_DBUF_OUT, + PCD_EP_DBUF_IN, + PCD_EP_DBUF_ERR, +}PCD_EP_DBUF_DIR; + +/** + * @brief PCD endpoint buffer number + */ +typedef enum +{ + PCD_EP_NOBUF, + PCD_EP_BUF0, + PCD_EP_BUF1 +}PCD_EP_BUF_NUM; +#endif /* USB */ + +#if defined (USB_OTG_FS) +typedef USB_OTG_GlobalTypeDef PCD_TypeDef; +typedef USB_OTG_CfgTypeDef PCD_InitTypeDef; +typedef USB_OTG_EPTypeDef PCD_EPTypeDef; +#endif /* USB_OTG_FS */ + +#if defined (USB) +typedef USB_TypeDef PCD_TypeDef; +typedef USB_CfgTypeDef PCD_InitTypeDef; +typedef USB_EPTypeDef PCD_EPTypeDef; +#endif /* USB */ + +/** + * @brief PCD Handle Structure definition + */ +typedef struct +{ + PCD_TypeDef *Instance; /*!< Register base address */ + PCD_InitTypeDef Init; /*!< PCD required parameters */ + __IO uint8_t USB_Address; /*!< USB Address: not used by USB OTG FS */ + PCD_EPTypeDef IN_ep[15]; /*!< IN endpoint parameters */ + PCD_EPTypeDef OUT_ep[15]; /*!< OUT endpoint parameters */ + HAL_LockTypeDef Lock; /*!< PCD peripheral status */ + __IO PCD_StateTypeDef State; /*!< PCD communication state */ + uint32_t Setup[12]; /*!< Setup packet buffer */ + void *pData; /*!< Pointer to upper stack Handler */ +} PCD_HandleTypeDef; + +/** + * @} + */ + +/* Include PCD HAL Extension module */ +#include "stm32f1xx_hal_pcd_ex.h" + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup PCD_Exported_Constants PCD Exported Constants + * @{ + */ + +/** @defgroup PCD_Speed PCD Speed + * @{ + */ +#define PCD_SPEED_HIGH 0 /* Not Supported */ +#define PCD_SPEED_HIGH_IN_FULL 1 /* Not Supported */ +#define PCD_SPEED_FULL 2 +/** + * @} + */ + +/** @defgroup PCD_PHY_Module PCD PHY Module + * @{ + */ +#define PCD_PHY_EMBEDDED 2 +/** + * @} + */ + +/** @defgroup PCD_Turnaround_Timeout Turnaround Timeout Value + * @{ + */ +#ifndef USBD_FS_TRDT_VALUE + #define USBD_FS_TRDT_VALUE 5 +#endif /* USBD_FS_TRDT_VALUE */ +/** + * @} + */ + +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup PCD_Exported_Macros PCD Exported Macros + * @brief macros to handle interrupts and specific clock configurations + * @{ + */ +#if defined (USB_OTG_FS) + +#define __HAL_PCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance) +#define __HAL_PCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance) + +#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) +#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__)) +#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0) + +#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \ + ~(USB_OTG_PCGCCTL_STOPCLK) + +#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK + +#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE))&0x10) + +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE) +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE) +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE + +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() \ + do{ \ + EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \ + EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE; \ + } while(0) + +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE() \ + do{ \ + EXTI->FTSR |= (USB_OTG_FS_WAKEUP_EXTI_LINE); \ + EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \ + } while(0) + +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do{ \ + EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \ + EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE); \ + EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE; \ + EXTI->FTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE; \ + } while(0) + +#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE) +#endif /* USB_OTG_FS */ + +#if defined (USB) +#define __HAL_PCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance) +#define __HAL_PCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance) +#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) +#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= ~(__INTERRUPT__)) + +#define __HAL_USB_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_WAKEUP_EXTI_LINE +#define __HAL_USB_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_WAKEUP_EXTI_LINE) +#define __HAL_USB_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_WAKEUP_EXTI_LINE) +#define __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_WAKEUP_EXTI_LINE + +#define __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE() \ + do{ \ + EXTI->FTSR &= ~(USB_WAKEUP_EXTI_LINE); \ + EXTI->RTSR |= USB_WAKEUP_EXTI_LINE; \ + } while(0) + +#define __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE() \ + do{ \ + EXTI->FTSR |= (USB_WAKEUP_EXTI_LINE); \ + EXTI->RTSR &= ~(USB_WAKEUP_EXTI_LINE); \ + } while(0) + +#define __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() \ + do{ \ + EXTI->RTSR &= ~(USB_WAKEUP_EXTI_LINE); \ + EXTI->FTSR &= ~(USB_WAKEUP_EXTI_LINE); \ + EXTI->RTSR |= USB_WAKEUP_EXTI_LINE; \ + EXTI->FTSR |= USB_WAKEUP_EXTI_LINE; \ + } while(0) +#endif /* USB */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCD_Exported_Functions PCD Exported Functions + * @{ + */ + +/* Initialization/de-initialization functions ********************************/ +/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd); +void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd); +/** + * @} + */ + +/* I/O operation functions ***************************************************/ +/* Non-Blocking mode: Interrupt */ +/** @addtogroup PCD_Exported_Functions_Group2 IO operation functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd); +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd); + +void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); +void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd); +void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd); +/** + * @} + */ + +/* Peripheral Control functions **********************************************/ +/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address); +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type); +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); +uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); +HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); +HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); +/** + * @} + */ + +/* Peripheral State functions ************************************************/ +/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions + * @{ + */ +PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); +/** + * @} + */ + +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup PCD_Private_Constants PCD Private Constants + * @{ + */ +/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt + * @{ + */ +#if defined (USB_OTG_FS) +#define USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE ((uint32_t)0x08) +#define USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE ((uint32_t)0x0C) +#define USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE ((uint32_t)0x10) + +#define USB_OTG_FS_WAKEUP_EXTI_LINE ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB EXTI Line */ +#endif /* USB_OTG_FS */ + +#if defined (USB) +#define USB_WAKEUP_EXTI_LINE ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB EXTI Line */ +#endif /* USB */ +/** + * @} + */ + +#if defined (USB) +/** @defgroup PCD_EP0_MPS PCD EP0 MPS + * @{ + */ +#define PCD_EP0MPS_64 DEP0CTL_MPS_64 +#define PCD_EP0MPS_32 DEP0CTL_MPS_32 +#define PCD_EP0MPS_16 DEP0CTL_MPS_16 +#define PCD_EP0MPS_08 DEP0CTL_MPS_8 +/** + * @} + */ + +/** @defgroup PCD_ENDP PCD ENDP + * @{ + */ +#define PCD_ENDP0 ((uint8_t)0) +#define PCD_ENDP1 ((uint8_t)1) +#define PCD_ENDP2 ((uint8_t)2) +#define PCD_ENDP3 ((uint8_t)3) +#define PCD_ENDP4 ((uint8_t)4) +#define PCD_ENDP5 ((uint8_t)5) +#define PCD_ENDP6 ((uint8_t)6) +#define PCD_ENDP7 ((uint8_t)7) +/** + * @} + */ + +/** @defgroup PCD_ENDP_Kind PCD Endpoint Kind + * @{ + */ +#define PCD_SNG_BUF 0 +#define PCD_DBL_BUF 1 +/** + * @} + */ +#endif /* USB */ +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @addtogroup PCD_Private_Macros PCD Private Macros + * @{ + */ +#if defined (USB) +/* SetENDPOINT */ +#define PCD_SET_ENDPOINT(USBx, bEpNum,wRegValue) (*(&(USBx)->EP0R + (bEpNum) * 2)= (uint16_t)(wRegValue)) + +/* GetENDPOINT */ +#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(&(USBx)->EP0R + (bEpNum) * 2)) + +/* ENDPOINT transfer */ +#define USB_EP0StartXfer USB_EPStartXfer + +/** + * @brief sets the type in the endpoint register(bits EP_TYPE[1:0]) + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param wType: Endpoint Type. + * @retval None + */ +#define PCD_SET_EPTYPE(USBx, bEpNum,wType) (PCD_SET_ENDPOINT((USBx), (bEpNum),\ + ((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_MASK) | (wType) ))) + +/** + * @brief gets the type in the endpoint register(bits EP_TYPE[1:0]) + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval Endpoint Type + */ +#define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_FIELD) + +/** + * @brief free buffer used from the application realizing it to the line + toggles bit SW_BUF in the double buffered endpoint register + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param bDir: Direction + * @retval None + */ +#define PCD_FreeUserBuffer(USBx, bEpNum, bDir)\ +{\ + if ((bDir) == PCD_EP_DBUF_OUT)\ + { /* OUT double buffered endpoint */\ + PCD_TX_DTOG((USBx), (bEpNum));\ + }\ + else if ((bDir) == PCD_EP_DBUF_IN)\ + { /* IN double buffered endpoint */\ + PCD_RX_DTOG((USBx), (bEpNum));\ + }\ +} + +/** + * @brief gets direction of the double buffered endpoint + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval EP_DBUF_OUT, EP_DBUF_IN, + * EP_DBUF_ERR if the endpoint counter not yet programmed. + */ +#define PCD_GET_DB_DIR(USBx, bEpNum)\ +{\ + if ((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum)) & 0xFC00) != 0)\ + return(PCD_EP_DBUF_OUT);\ + else if (((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x03FF) != 0)\ + return(PCD_EP_DBUF_IN);\ + else\ + return(PCD_EP_DBUF_ERR);\ +} + +/** + * @brief sets the status for tx transfer (bits STAT_TX[1:0]). + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param wState: new state + * @retval None + */ +#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) { register uint16_t _wRegVal;\ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_DTOGMASK;\ + /* toggle first bit ? */ \ + if((USB_EPTX_DTOG1 & (wState))!= 0)\ + { \ + _wRegVal ^= USB_EPTX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if((USB_EPTX_DTOG2 & (wState))!= 0) \ + { \ + _wRegVal ^= USB_EPTX_DTOG2; \ + } \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX));\ + } /* PCD_SET_EP_TX_STATUS */ + +/** + * @brief sets the status for rx transfer (bits STAT_TX[1:0]) + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param wState: new state + * @retval None + */ +#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) {\ + register uint16_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_DTOGMASK;\ + /* toggle first bit ? */ \ + if((USB_EPRX_DTOG1 & (wState))!= 0) \ + { \ + _wRegVal ^= USB_EPRX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if((USB_EPRX_DTOG2 & (wState))!= 0) \ + { \ + _wRegVal ^= USB_EPRX_DTOG2; \ + } \ + PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \ + } /* PCD_SET_EP_RX_STATUS */ + +/** + * @brief sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0]) + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param wStaterx: new state. + * @param wStatetx: new state. + * @retval None + */ +#define PCD_SET_EP_TXRX_STATUS(USBx,bEpNum,wStaterx,wStatetx) {\ + register uint32_t _wRegVal; \ + \ + _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (USB_EPRX_DTOGMASK |USB_EPTX_STAT) ;\ + /* toggle first bit ? */ \ + if((USB_EPRX_DTOG1 & ((wStaterx)))!= 0) \ + { \ + _wRegVal ^= USB_EPRX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if((USB_EPRX_DTOG2 & (wStaterx))!= 0) \ + { \ + _wRegVal ^= USB_EPRX_DTOG2; \ + } \ + /* toggle first bit ? */ \ + if((USB_EPTX_DTOG1 & (wStatetx))!= 0) \ + { \ + _wRegVal ^= USB_EPTX_DTOG1; \ + } \ + /* toggle second bit ? */ \ + if((USB_EPTX_DTOG2 & (wStatetx))!= 0) \ + { \ + _wRegVal ^= USB_EPTX_DTOG2; \ + } \ + PCD_SET_ENDPOINT((USBx), (bEpNum), _wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX); \ + } /* PCD_SET_EP_TXRX_STATUS */ + +/** + * @brief gets the status for tx/rx transfer (bits STAT_TX[1:0] + * /STAT_RX[1:0]) + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval status + */ +#define PCD_GET_EP_TX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_STAT) +#define PCD_GET_EP_RX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_STAT) + +/** + * @brief sets directly the VALID tx/rx-status into the endpoint register + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval None + */ +#define PCD_SET_EP_TX_VALID(USBx, bEpNum) (PCD_SET_EP_TX_STATUS((USBx), (bEpNum), USB_EP_TX_VALID)) +#define PCD_SET_EP_RX_VALID(USBx, bEpNum) (PCD_SET_EP_RX_STATUS((USBx), (bEpNum), USB_EP_RX_VALID)) + +/** + * @brief checks stall condition in an endpoint. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval TRUE = endpoint in stall condition. + */ +#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS((USBx), (bEpNum)) \ + == USB_EP_TX_STALL) +#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS((USBx), (bEpNum)) \ + == USB_EP_RX_STALL) + +/** + * @brief set & clear EP_KIND bit. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval None + */ +#define PCD_SET_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \ + (USB_EP_CTR_RX|USB_EP_CTR_TX|((PCD_GET_ENDPOINT((USBx), (bEpNum)) | USB_EP_KIND) & USB_EPREG_MASK)))) +#define PCD_CLEAR_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \ + (USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPKIND_MASK)))) + +/** + * @brief Sets/clears directly STATUS_OUT bit in the endpoint register. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval None + */ +#define PCD_SET_OUT_STATUS(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum)) +#define PCD_CLEAR_OUT_STATUS(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum)) + +/** + * @brief Sets/clears directly EP_KIND bit in the endpoint register. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval None + */ +#define PCD_SET_EP_DBUF(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum)) +#define PCD_CLEAR_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum)) + +/** + * @brief Clears bit CTR_RX / CTR_TX in the endpoint register. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval None + */ +#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum),\ + PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0x7FFF & USB_EPREG_MASK)) +#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum),\ + PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0xFF7F & USB_EPREG_MASK)) + +/** + * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval None + */ +#define PCD_RX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \ + USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_RX | (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK))) +#define PCD_TX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \ + USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_TX | (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK))) + +/** + * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval None + */ +#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_DTOG_RX) != 0)\ + { \ + PCD_RX_DTOG((USBx), (bEpNum)); \ + } +#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_DTOG_TX) != 0)\ + { \ + PCD_TX_DTOG((USBx), (bEpNum)); \ + } + +/** + * @brief Sets address in an endpoint register. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param bAddr: Address. + * @retval None + */ +#define PCD_SET_EP_ADDRESS(USBx, bEpNum,bAddr) PCD_SET_ENDPOINT((USBx), (bEpNum),\ + USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK) | (bAddr)) + +#define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPADDR_FIELD)) + +#define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint32_t *)(((USBx)->BTABLE+(bEpNum)*8)*2+ ((uint32_t)(USBx) + 0x400))) +#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint32_t *)(((USBx)->BTABLE+(bEpNum)*8+2)*2+ ((uint32_t)(USBx) + 0x400))) +#define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint32_t *)(((USBx)->BTABLE+(bEpNum)*8+4)*2+ ((uint32_t)(USBx) + 0x400))) +#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint32_t *)(((USBx)->BTABLE+(bEpNum)*8+6)*2+ ((uint32_t)(USBx) + 0x400))) + +#define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\ + uint32_t *pdwReg = PCD_EP_RX_CNT((USBx), (bEpNum)); \ + PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount));\ + } + +/** + * @brief sets address of the tx/rx buffer. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param wAddr: address to be set (must be word aligned). + * @retval None + */ +#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_TX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1) << 1)) +#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_RX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1) << 1)) + +/** + * @brief Gets address of the tx/rx buffer. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval address of the buffer. + */ +#define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS((USBx), (bEpNum))) +#define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS((USBx), (bEpNum))) + +/** + * @brief Sets counter of rx buffer with no. of blocks. + * @param dwReg: Register + * @param wCount: Counter. + * @param wNBlocks: no. of Blocks. + * @retval None + */ +#define PCD_CALC_BLK32(dwReg,wCount,wNBlocks) {\ + (wNBlocks) = (wCount) >> 5;\ + if(((wCount) & 0x1f) == 0)\ + { \ + (wNBlocks)--;\ + } \ + *pdwReg = (uint16_t)((uint16_t)((wNBlocks) << 10) | 0x8000); \ + }/* PCD_CALC_BLK32 */ + +#define PCD_CALC_BLK2(dwReg,wCount,wNBlocks) {\ + (wNBlocks) = (wCount) >> 1;\ + if(((wCount) & 0x1) != 0)\ + { \ + (wNBlocks)++;\ + } \ + *pdwReg = (uint16_t)((wNBlocks) << 10);\ + }/* PCD_CALC_BLK2 */ + +#define PCD_SET_EP_CNT_RX_REG(dwReg,wCount) {\ + uint16_t wNBlocks;\ + if((wCount) > 62) \ + { \ + PCD_CALC_BLK32((dwReg),(wCount),wNBlocks); \ + } \ + else \ + { \ + PCD_CALC_BLK2((dwReg),(wCount),wNBlocks); \ + } \ + }/* PCD_SET_EP_CNT_RX_REG */ + +#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum,wCount) {\ + uint32_t *pdwReg = PCD_EP_TX_CNT((USBx), (bEpNum)); \ + PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount));\ + } + +/** + * @brief sets counter for the tx/rx buffer. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param wCount: Counter value. + * @retval None + */ +#define PCD_SET_EP_TX_CNT(USBx, bEpNum,wCount) (*PCD_EP_TX_CNT((USBx), (bEpNum)) = (wCount)) + + +/** + * @brief gets counter of the tx buffer. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval Counter value + */ +#define PCD_GET_EP_TX_CNT(USBx, bEpNum) ((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x3ff) +#define PCD_GET_EP_RX_CNT(USBx, bEpNum) ((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum))) & 0x3ff) + +/** + * @brief Sets buffer 0/1 address in a double buffer endpoint. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param wBuf0Addr: buffer 0 address. + * @retval Counter value + */ +#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum,wBuf0Addr) {PCD_SET_EP_TX_ADDRESS((USBx), (bEpNum), (wBuf0Addr));} +#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum,wBuf1Addr) {PCD_SET_EP_RX_ADDRESS((USBx), (bEpNum), (wBuf1Addr));} + +/** + * @brief Sets addresses in a double buffer endpoint. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param wBuf0Addr: buffer 0 address. + * @param wBuf1Addr = buffer 1 address. + * @retval None + */ +#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum,wBuf0Addr,wBuf1Addr) { \ + PCD_SET_EP_DBUF0_ADDR((USBx), (bEpNum), (wBuf0Addr));\ + PCD_SET_EP_DBUF1_ADDR((USBx), (bEpNum), (wBuf1Addr));\ + } /* PCD_SET_EP_DBUF_ADDR */ + +/** + * @brief Gets buffer 0/1 address of a double buffer endpoint. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval None + */ +#define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS((USBx), (bEpNum))) +#define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS((USBx), (bEpNum))) + +/** + * @brief Gets buffer 0/1 address of a double buffer endpoint. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @param bDir: endpoint dir EP_DBUF_OUT = OUT + * EP_DBUF_IN = IN + * @param wCount: Counter value + * @retval None + */ +#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) { \ + if((bDir) == PCD_EP_DBUF_OUT)\ + /* OUT endpoint */ \ + {PCD_SET_EP_RX_DBUF0_CNT((USBx), (bEpNum),(wCount));} \ + else if((bDir) == PCD_EP_DBUF_IN)\ + /* IN endpoint */ \ + *PCD_EP_TX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \ + } /* SetEPDblBuf0Count*/ + +#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) { \ + if((bDir) == PCD_EP_DBUF_OUT)\ + {/* OUT endpoint */ \ + PCD_SET_EP_RX_CNT((USBx), (bEpNum),(wCount)); \ + } \ + else if((bDir) == PCD_EP_DBUF_IN)\ + {/* IN endpoint */ \ + *PCD_EP_TX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \ + } \ + } /* SetEPDblBuf1Count */ + +#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) {\ + PCD_SET_EP_DBUF0_CNT((USBx), (bEpNum), (bDir), (wCount)); \ + PCD_SET_EP_DBUF1_CNT((USBx), (bEpNum), (bDir), (wCount)); \ + } /* PCD_SET_EP_DBUF_CNT */ + +/** + * @brief Gets buffer 0/1 rx/tx counter for double buffering. + * @param USBx: USB peripheral instance register address. + * @param bEpNum: Endpoint Number. + * @retval None + */ +#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT((USBx), (bEpNum))) +#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT((USBx), (bEpNum))) + +#endif /* USB */ + +/** @defgroup PCD_Instance_definition PCD Instance definition + * @{ + */ +#define IS_PCD_ALL_INSTANCE IS_USB_ALL_INSTANCE +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32F102x6 || STM32F102xB || */ + /* STM32F103x6 || STM32F103xB || */ + /* STM32F103xE || STM32F103xG || */ + /* STM32F105xC || STM32F107xC */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32F1xx_HAL_PCD_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h new file mode 100644 index 0000000..5e13c73 --- /dev/null +++ b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pcd_ex.h @@ -0,0 +1,116 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_pcd_ex.h + * @author MCD Application Team + * @version V1.0.4 + * @date 29-April-2016 + * @brief Header file of Extended PCD HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_HAL_PCD_EX_H +#define __STM32F1xx_HAL_PCD_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if defined(STM32F102x6) || defined(STM32F102xB) || \ + defined(STM32F103x6) || defined(STM32F103xB) || \ + defined(STM32F103xE) || defined(STM32F103xG) || \ + defined(STM32F105xC) || defined(STM32F107xC) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup PCDEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ +/* Exported macros -----------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions + * @{ + */ +/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions + * @{ + */ +#if defined (USB_OTG_FS) +HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size); +HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size); +#endif /* USB_OTG_FS */ + +#if defined (USB) +HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, + uint16_t ep_addr, + uint16_t ep_kind, + uint32_t pmaadress); +#endif /* USB */ +/** + * @} + */ + +/** @addtogroup PCDEx_Exported_Functions_Group2 Peripheral State functions + * @{ + */ +void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state); +/** + * @} + */ +/** + * @} + */ +/** + * @} + */ + +/** + * @} + */ +#endif /* STM32F102x6 || STM32F102xB || */ + /* STM32F103x6 || STM32F103xB || */ + /* STM32F103xE || STM32F103xG || */ + /* STM32F105xC || STM32F107xC */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32F1xx_HAL_PCD_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h new file mode 100644 index 0000000..d9d59f5 --- /dev/null +++ b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_ll_usb.h @@ -0,0 +1,616 @@ +/** + ****************************************************************************** + * @file stm32f1xx_ll_usb.h + * @author MCD Application Team + * @version V1.0.4 + * @date 29-April-2016 + * @brief Header file of USB Low Layer HAL module. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F1xx_LL_USB_H +#define __STM32F1xx_LL_USB_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if defined(STM32F102x6) || defined(STM32F102xB) || \ + defined(STM32F103x6) || defined(STM32F103xB) || \ + defined(STM32F103xE) || defined(STM32F103xG) || \ + defined(STM32F105xC) || defined(STM32F107xC) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal_def.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @addtogroup USB_LL + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup USB_LL_Exported_Types USB Low Layer Exported Types + * @{ + */ +/** + * @brief USB Mode definition + */ +typedef enum +{ + USB_DEVICE_MODE = 0, + USB_HOST_MODE = 1, + USB_DRD_MODE = 2 +}USB_ModeTypeDef; + +#if defined (USB_OTG_FS) +/** + * @brief URB States definition + */ +typedef enum { + URB_IDLE = 0, + URB_DONE, + URB_NOTREADY, + URB_NYET, + URB_ERROR, + URB_STALL +}USB_OTG_URBStateTypeDef; + +/** + * @brief Host channel States definition + */ +typedef enum { + HC_IDLE = 0, + HC_XFRC, + HC_HALTED, + HC_NAK, + HC_NYET, + HC_STALL, + HC_XACTERR, + HC_BBLERR, + HC_DATATGLERR +}USB_OTG_HCStateTypeDef; + +/** + * @brief USB OTG Initialization Structure definition + */ +typedef struct +{ + uint32_t dev_endpoints; /*!< Device Endpoints number. + This parameter depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t Host_channels; /*!< Host Channels number. + This parameter Depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t speed; /*!< USB Core speed. + This parameter can be any value of @ref USB_Core_Speed_ */ + + uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. + This parameter can be any value of @ref USB_EP0_MPS_ */ + + uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ + + uint32_t low_power_enable; /*!< Enable or disable the low power mode. */ + + uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ + + uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */ +}USB_OTG_CfgTypeDef; + +typedef struct +{ + uint8_t num; /*!< Endpoint number + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t is_in; /*!< Endpoint direction + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t is_stall; /*!< Endpoint stall condition + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t type; /*!< Endpoint type + This parameter can be any value of @ref USB_EP_Type_ */ + + uint8_t data_pid_start; /*!< Initial data PID + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t even_odd_frame; /*!< IFrame parity + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint16_t tx_fifo_num; /*!< Transmission FIFO number + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t maxpacket; /*!< Endpoint Max packet size + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ + + uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */ + + uint32_t xfer_len; /*!< Current transfer length */ + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ +}USB_OTG_EPTypeDef; + +typedef struct +{ + uint8_t dev_addr ; /*!< USB device address. + This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ + + uint8_t ch_num; /*!< Host channel number. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t ep_num; /*!< Endpoint number. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t ep_is_in; /*!< Endpoint direction + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t speed; /*!< USB Host speed. + This parameter can be any value of @ref USB_Core_Speed_ */ + + uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */ + + uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */ + + uint8_t ep_type; /*!< Endpoint Type. + This parameter can be any value of @ref USB_EP_Type_ */ + + uint16_t max_packet; /*!< Endpoint Max packet size. + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t data_pid; /*!< Initial data PID. + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ + + uint32_t xfer_len; /*!< Current transfer length. */ + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ + + uint8_t toggle_in; /*!< IN transfer current toggle flag. + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t toggle_out; /*!< OUT transfer current toggle flag + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */ + + uint32_t ErrCnt; /*!< Host channel error count.*/ + + USB_OTG_URBStateTypeDef urb_state; /*!< URB state. + This parameter can be any value of @ref USB_OTG_URBStateTypeDef */ + + USB_OTG_HCStateTypeDef state; /*!< Host Channel state. + This parameter can be any value of @ref USB_OTG_HCStateTypeDef */ +}USB_OTG_HCTypeDef; +#endif /* USB_OTG_FS */ + +#if defined (USB) +/** + * @brief USB Initialization Structure definition + */ +typedef struct +{ + uint32_t dev_endpoints; /*!< Device Endpoints number. + This parameter depends on the used USB core. + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint32_t speed; /*!< USB Core speed. + This parameter can be any value of @ref USB_Core_Speed */ + + uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. + This parameter can be any value of @ref USB_EP0_MPS */ + + uint32_t phy_itface; /*!< Select the used PHY interface. + This parameter can be any value of @ref USB_Core_PHY */ + + uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ + + uint32_t low_power_enable; /*!< Enable or disable Low Power mode */ + + uint32_t lpm_enable; /*!< Enable or disable Battery charging. */ + + uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */ +} USB_CfgTypeDef; + +typedef struct +{ + uint8_t num; /*!< Endpoint number + This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ + + uint8_t is_in; /*!< Endpoint direction + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t is_stall; /*!< Endpoint stall condition + This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ + + uint8_t type; /*!< Endpoint type + This parameter can be any value of @ref USB_EP_Type */ + + uint16_t pmaadress; /*!< PMA Address + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint16_t pmaaddr0; /*!< PMA Address0 + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint16_t pmaaddr1; /*!< PMA Address1 + This parameter can be any value between Min_addr = 0 and Max_addr = 1K */ + + uint8_t doublebuffer; /*!< Double buffer enable + This parameter can be 0 or 1 */ + + uint16_t tx_fifo_num; /*!< This parameter is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral + This parameter is added to ensure compatibility across USB peripherals */ + + uint32_t maxpacket; /*!< Endpoint Max packet size + This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ + + uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ + + uint32_t xfer_len; /*!< Current transfer length */ + + uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ + +} USB_EPTypeDef; +#endif /* USB */ +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup USB_LL_Exported_Constants USB Low Layer Exported Constants + * @{ + */ +#if defined (USB_OTG_FS) +/** @defgroup USB_LL_Core_Mode USB Low Layer Core Mode + * @{ + */ +#define USB_OTG_MODE_DEVICE 0 +#define USB_OTG_MODE_HOST 1 +#define USB_OTG_MODE_DRD 2 +/** + * @} + */ + +/** @defgroup USB_LL_Core_Speed USB Low Layer Core Speed + * @{ + */ +#define USB_OTG_SPEED_LOW 2 +#define USB_OTG_SPEED_FULL 3 + +/** + * @} + */ + +/** @defgroup USB_LL_Core_PHY USB Low Layer Core PHY + * @{ + */ +#define USB_OTG_ULPI_PHY 1 +#define USB_OTG_EMBEDDED_PHY 2 +/** + * @} + */ + +/** @defgroup USB_LL_Core_MPS USB Low Layer Core MPS + * @{ + */ +#define USB_OTG_FS_MAX_PACKET_SIZE 64 +#define USB_OTG_MAX_EP0_SIZE 64 +/** + * @} + */ + +/** @defgroup USB_LL_Core_PHY_Frequency USB Low Layer Core PHY Frequency + * @{ + */ +#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1 << 1) +#define DSTS_ENUMSPD_LS_PHY_6MHZ (2 << 1) +#define DSTS_ENUMSPD_FS_PHY_48MHZ (3 << 1) +/** + * @} + */ + +/** @defgroup USB_LL_CORE_Frame_Interval USB Low Layer Core Frame Interval + * @{ + */ +#define DCFG_FRAME_INTERVAL_80 0 +#define DCFG_FRAME_INTERVAL_85 1 +#define DCFG_FRAME_INTERVAL_90 2 +#define DCFG_FRAME_INTERVAL_95 3 +/** + * @} + */ + +/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS + * @{ + */ +#define DEP0CTL_MPS_64 0 +#define DEP0CTL_MPS_32 1 +#define DEP0CTL_MPS_16 2 +#define DEP0CTL_MPS_8 3 +/** + * @} + */ + +/** @defgroup USB_LL_EP_Speed USB Low Layer EP Speed + * @{ + */ +#define EP_SPEED_LOW 0 +#define EP_SPEED_FULL 1 +#define EP_SPEED_HIGH 2 +/** + * @} + */ + +/** @defgroup USB_LL_EP_Type USB Low Layer EP Type + * @{ + */ +#define EP_TYPE_CTRL 0 +#define EP_TYPE_ISOC 1 +#define EP_TYPE_BULK 2 +#define EP_TYPE_INTR 3 +#define EP_TYPE_MSK 3 +/** + * @} + */ + +/** @defgroup USB_LL_STS_Defines USB Low Layer STS Defines + * @{ + */ +#define STS_GOUT_NAK 1 +#define STS_DATA_UPDT 2 +#define STS_XFER_COMP 3 +#define STS_SETUP_COMP 4 +#define STS_SETUP_UPDT 6 +/** + * @} + */ + +/** @defgroup USB_LL_HCFG_SPEED_Defines USB Low Layer HCFG Speed Defines + * @{ + */ +#define HCFG_30_60_MHZ 0 +#define HCFG_48_MHZ 1 +#define HCFG_6_MHZ 2 +/** + * @} + */ + +/** @defgroup USB_LL_HPRT0_PRTSPD_SPEED_Defines USB Low Layer HPRT0 PRTSPD Speed Defines + * @{ + */ +#define HPRT0_PRTSPD_HIGH_SPEED 0 +#define HPRT0_PRTSPD_FULL_SPEED 1 +#define HPRT0_PRTSPD_LOW_SPEED 2 +/** + * @} + */ + +#define HCCHAR_CTRL 0 +#define HCCHAR_ISOC 1 +#define HCCHAR_BULK 2 +#define HCCHAR_INTR 3 + +#define HC_PID_DATA0 0 +#define HC_PID_DATA2 1 +#define HC_PID_DATA1 2 +#define HC_PID_SETUP 3 + +#define GRXSTS_PKTSTS_IN 2 +#define GRXSTS_PKTSTS_IN_XFER_COMP 3 +#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5 +#define GRXSTS_PKTSTS_CH_HALTED 7 + +#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE) +#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE) + +#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)((uint32_t )USBx + USB_OTG_DEVICE_BASE)) +#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE)) +#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE)) +#define USBx_DFIFO(i) *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE) + +#define USBx_HOST ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE)) +#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE)) +#endif /* USB_OTG_FS */ + +#if defined (USB) +/** @defgroup USB_LL_EP0_MPS USB Low Layer EP0 MPS + * @{ + */ +#define DEP0CTL_MPS_64 0 +#define DEP0CTL_MPS_32 1 +#define DEP0CTL_MPS_16 2 +#define DEP0CTL_MPS_8 3 +/** + * @} + */ + +/** @defgroup USB_LL_EP_Type USB Low Layer EP Type + * @{ + */ +#define EP_TYPE_CTRL 0 +#define EP_TYPE_ISOC 1 +#define EP_TYPE_BULK 2 +#define EP_TYPE_INTR 3 +#define EP_TYPE_MSK 3 +/** + * @} + */ + +#define BTABLE_ADDRESS (0x000) +#endif /* USB */ +/** + * @} + */ + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup USB_LL_Exported_Macros USB Low Layer Exported Macros + * @{ + */ +#if defined (USB_OTG_FS) +#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__)) +#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__)) + +#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__)) +#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__)) +#endif /* USB_OTG_FS */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup USB_LL_Exported_Functions USB Low Layer Exported Functions + * @{ + */ +/** @addtogroup USB_LL_Exported_Functions_Group1 Peripheral Control functions + * @{ + */ +#if defined (USB_OTG_FS) +HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init); +HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init); +HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_ModeTypeDef mode); +HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed); +HAL_StatusTypeDef USB_FlushRxFifo (USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num ); +HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len); +void * USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len); +HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); +HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address); +HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t *psetup); +uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum); +uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum); +void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt); + +HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); +HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq); +HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state); +uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx); +uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, + uint8_t ch_num, + uint8_t epnum, + uint8_t dev_address, + uint8_t speed, + uint8_t ep_type, + uint16_t mps); +HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc); +uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num); +HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num); +HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx); +#endif /* USB_OTG_FS */ + +#if defined (USB) +HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef Init); +HAL_StatusTypeDef USB_DevInit(USB_TypeDef *USBx, USB_CfgTypeDef Init); +HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx); +HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx); +HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx , USB_ModeTypeDef mode); +HAL_StatusTypeDef USB_SetDevSpeed(USB_TypeDef *USBx , uint8_t speed); +HAL_StatusTypeDef USB_FlushRxFifo (USB_TypeDef *USBx); +HAL_StatusTypeDef USB_FlushTxFifo (USB_TypeDef *USBx, uint32_t num ); +HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); +HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx , USB_EPTypeDef *ep); +HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len); +void * USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len); +HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx , USB_EPTypeDef *ep); +HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx , USB_EPTypeDef *ep); +HAL_StatusTypeDef USB_SetDevAddress (USB_TypeDef *USBx, uint8_t address); +HAL_StatusTypeDef USB_DevConnect (USB_TypeDef *USBx); +HAL_StatusTypeDef USB_DevDisconnect (USB_TypeDef *USBx); +HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx); +HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup); +uint32_t USB_ReadInterrupts (USB_TypeDef *USBx); +uint32_t USB_ReadDevAllOutEpInterrupt (USB_TypeDef *USBx); +uint32_t USB_ReadDevOutEPInterrupt (USB_TypeDef *USBx , uint8_t epnum); +uint32_t USB_ReadDevAllInEpInterrupt (USB_TypeDef *USBx); +uint32_t USB_ReadDevInEPInterrupt (USB_TypeDef *USBx , uint8_t epnum); +void USB_ClearInterrupts (USB_TypeDef *USBx, uint32_t interrupt); + +HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx); +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx); +void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes); +void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes); +#endif /* USB */ +/** + * @} + */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32F102x6 || STM32F102xB || */ + /* STM32F103x6 || STM32F103xB || */ + /* STM32F103xE || STM32F103xG || */ + /* STM32F105xC || STM32F107xC */ + +#ifdef __cplusplus +} +#endif + + +#endif /* __STM32F1xx_LL_USB_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_iwdg.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_iwdg.c deleted file mode 100644 index 23e0791..0000000 --- a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_iwdg.c +++ /dev/null @@ -1,360 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_iwdg.c - * @author MCD Application Team - * @version V1.0.4 - * @date 29-April-2016 - * @brief IWDG HAL module driver. - * This file provides firmware functions to manage the following - * functionalities of the Independent Watchdog (IWDG) peripheral: - * + Initialization and Configuration functions - * + IO operation functions - * + Peripheral State functions - @verbatim -================================================================================ - ##### IWDG specific features ##### -================================================================================ - [..] - (+) The IWDG can be started by either software or hardware (configurable - through option byte). - (+) The IWDG is clocked by its own dedicated Low-Speed clock (LSI) and - thus stays active even if the main clock fails. - (+) Once the IWDG is started, the LSI is forced ON and cannot be disabled - (LSI cannot be disabled too), and the counter starts counting down from - the reset value of 0xFFF. When it reaches the end of count value (0x000) - a system reset is generated. - (+) The IWDG counter should be refreshed at regular intervals, otherwise the - watchdog generates an MCU reset when the counter reaches 0. - (+) The IWDG is implemented in the VDD voltage domain that is still functional - in STOP and STANDBY mode (IWDG reset can wake-up from STANDBY). - (+) IWDGRST flag in RCC_CSR register can be used to inform when an IWDG - reset occurs. - - (+) Min-max timeout value at 40KHz (LSI): 0.1us / 26.2s . - The IWDG timeout may vary due to LSI frequency dispersion. STM32F1xx - devices provide the capability to measure the LSI frequency (LSI clock - connected internally to TIM5 CH4 input capture). The measured value - can be used to have an IWDG timeout with an acceptable accuracy. - For more information, please refer to the STM32F1xx Reference manual. - Note: LSI Calibration is only available on: High density, XL-density and Connectivity line devices. - - ##### How to use this driver ##### - ============================================================================== - [..] - (+) Use IWDG using HAL_IWDG_Init() function to : - (++) Enable write access to IWDG_PR, IWDG_RLR. - (++) Configure the IWDG prescaler, counter reload value. - This reload value will be loaded in the IWDG counter each time the counter - is reloaded, then the IWDG will start counting down from this value. - (+) Use IWDG using HAL_IWDG_Start() function to : - (++) Reload IWDG counter with value defined in the IWDG_RLR register. - (++) Start the IWDG, when the IWDG is used in software mode (no need - to enable the LSI, it will be enabled by hardware). - (+) Then the application program must refresh the IWDG counter at regular - intervals during normal operation to prevent an MCU reset, using - HAL_IWDG_Refresh() function. - - *** IWDG HAL driver macros list *** - ==================================== - [..] - Below the list of most used macros in IWDG HAL driver. - - (+) __HAL_IWDG_START: Enable the IWDG peripheral - (+) __HAL_IWDG_RELOAD_COUNTER: Reloads IWDG counter with value defined in the reload register - (+) __HAL_IWDG_GET_FLAG: Get the selected IWDG's flag status - - @endverbatim - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2016 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" - -/** @addtogroup STM32F1xx_HAL_Driver - * @{ - */ - -/** @defgroup IWDG IWDG - * @brief IWDG HAL module driver. - * @{ - */ - -#ifdef HAL_IWDG_MODULE_ENABLED - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/** @defgroup IWDG_Private_Constants IWDG Private Constants - * @{ - */ - -#define IWDG_DEFAULT_TIMEOUT (uint32_t)1000 - -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/** @defgroup IWDG_Exported_Functions IWDG Exported Functions - * @{ - */ - -/** @defgroup IWDG_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and Configuration functions. - * -@verbatim - =============================================================================== - ##### Initialization and de-initialization functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Initialize the IWDG according to the specified parameters - in the IWDG_InitTypeDef and create the associated handle - (+) Initialize the IWDG MSP - (+) DeInitialize IWDG MSP - -@endverbatim - * @{ - */ - -/** - * @brief Initializes the IWDG according to the specified - * parameters in the IWDG_InitTypeDef and creates the associated handle. - * @param hiwdg: pointer to a IWDG_HandleTypeDef structure that contains - * the configuration information for the specified IWDG module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg) -{ - /* Check the IWDG handle allocation */ - if(hiwdg == NULL) - { - return HAL_ERROR; - } - - /* Check the parameters */ - assert_param(IS_IWDG_ALL_INSTANCE(hiwdg->Instance)); - assert_param(IS_IWDG_PRESCALER(hiwdg->Init.Prescaler)); - assert_param(IS_IWDG_RELOAD(hiwdg->Init.Reload)); - - /* Check pending flag, if previous update not done, return error */ - if((__HAL_IWDG_GET_FLAG(hiwdg, IWDG_FLAG_PVU) != RESET) - &&(__HAL_IWDG_GET_FLAG(hiwdg, IWDG_FLAG_RVU) != RESET)) - { - return HAL_ERROR; - } - - if(hiwdg->State == HAL_IWDG_STATE_RESET) - { - /* Allocate lock resource and initialize it */ - hiwdg->Lock = HAL_UNLOCKED; - - /* Init the low level hardware */ - HAL_IWDG_MspInit(hiwdg); - } - - /* Change IWDG peripheral state */ - hiwdg->State = HAL_IWDG_STATE_BUSY; - - /* Enable write access to IWDG_PR and IWDG_RLR registers */ - IWDG_ENABLE_WRITE_ACCESS(hiwdg); - - /* Write to IWDG registers the IWDG_Prescaler & IWDG_Reload values to work with */ - MODIFY_REG(hiwdg->Instance->PR, IWDG_PR_PR, hiwdg->Init.Prescaler); - MODIFY_REG(hiwdg->Instance->RLR, IWDG_RLR_RL, hiwdg->Init.Reload); - - /* Change IWDG peripheral state */ - hiwdg->State = HAL_IWDG_STATE_READY; - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Initializes the IWDG MSP. - * @param hiwdg: pointer to a IWDG_HandleTypeDef structure that contains - * the configuration information for the specified IWDG module. - * @retval None - */ -__weak void HAL_IWDG_MspInit(IWDG_HandleTypeDef *hiwdg) -{ - /* Prevent unused argument(s) compilation warning */ - UNUSED(hiwdg); - /* NOTE : This function Should not be modified, when the callback is needed, - the HAL_IWDG_MspInit could be implemented in the user file - */ -} - -/** - * @} - */ - -/** @defgroup IWDG_Exported_Functions_Group2 IO operation functions - * @brief IO operation functions - * -@verbatim - =============================================================================== - ##### IO operation functions ##### - =============================================================================== - [..] This section provides functions allowing to: - (+) Start the IWDG. - (+) Refresh the IWDG. - -@endverbatim - * @{ - */ - -/** - * @brief Starts the IWDG. - * @param hiwdg: pointer to a IWDG_HandleTypeDef structure that contains - * the configuration information for the specified IWDG module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_IWDG_Start(IWDG_HandleTypeDef *hiwdg) -{ - /* Process Locked */ - __HAL_LOCK(hiwdg); - - /* Change IWDG peripheral state */ - hiwdg->State = HAL_IWDG_STATE_BUSY; - - /* Start the IWDG peripheral */ - __HAL_IWDG_START(hiwdg); - - /* Reload IWDG counter with value defined in the RLR register */ - __HAL_IWDG_RELOAD_COUNTER(hiwdg); - - /* Change IWDG peripheral state */ - hiwdg->State = HAL_IWDG_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hiwdg); - - /* Return function status */ - return HAL_OK; -} - -/** - * @brief Refreshes the IWDG. - * @param hiwdg: pointer to a IWDG_HandleTypeDef structure that contains - * the configuration information for the specified IWDG module. - * @retval HAL status - */ -HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg) -{ - uint32_t tickstart = 0; - - /* Process Locked */ - __HAL_LOCK(hiwdg); - - /* Change IWDG peripheral state */ - hiwdg->State = HAL_IWDG_STATE_BUSY; - - tickstart = HAL_GetTick(); - - /* Wait until RVU flag is RESET */ - while(__HAL_IWDG_GET_FLAG(hiwdg, IWDG_FLAG_RVU) != RESET) - { - if((HAL_GetTick() - tickstart ) > IWDG_DEFAULT_TIMEOUT) - { - /* Set IWDG state */ - hiwdg->State = HAL_IWDG_STATE_TIMEOUT; - - /* Process unlocked */ - __HAL_UNLOCK(hiwdg); - - return HAL_TIMEOUT; - } - } - - /* Reload IWDG counter with value defined in the reload register */ - __HAL_IWDG_RELOAD_COUNTER(hiwdg); - - /* Change IWDG peripheral state */ - hiwdg->State = HAL_IWDG_STATE_READY; - - /* Process Unlocked */ - __HAL_UNLOCK(hiwdg); - - /* Return function status */ - return HAL_OK; -} - -/** - * @} - */ - -/** @defgroup IWDG_Exported_Functions_Group3 Peripheral State functions - * @brief Peripheral State functions. - * -@verbatim - =============================================================================== - ##### Peripheral State functions ##### - =============================================================================== - [..] - This subsection permits to get in run-time the status of the peripheral - and the data flow. - -@endverbatim - * @{ - */ - -/** - * @brief Returns the IWDG state. - * @param hiwdg: pointer to a IWDG_HandleTypeDef structure that contains - * the configuration information for the specified IWDG module. - * @retval HAL state - */ -HAL_IWDG_StateTypeDef HAL_IWDG_GetState(IWDG_HandleTypeDef *hiwdg) -{ - return hiwdg->State; -} - -/** - * @} - */ - -/** - * @} - */ - -#endif /* HAL_IWDG_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c new file mode 100644 index 0000000..91461a3 --- /dev/null +++ b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd.c @@ -0,0 +1,1440 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_pcd.c + * @author MCD Application Team + * @version V1.0.4 + * @date 29-April-2016 + * @brief PCD HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + The PCD HAL driver can be used as follows: + + (#) Declare a PCD_HandleTypeDef handle structure, for example: + PCD_HandleTypeDef hpcd; + + (#) Fill parameters of Init structure in HCD handle + + (#) Call HAL_PCD_Init() API to initialize the HCD peripheral (Core, Device core, ...) + + (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API: + (##) Enable the PCD/USB Low Level interface clock using the following macro + (+++) __HAL_RCC_USB_CLK_ENABLE(); For USB Device FS peripheral available + on STM32F102xx and STM32F103xx devices + (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); For USB OTG FS peripheral available + on STM32F105xx and STM32F107xx devices + + (##) Initialize the related GPIO clocks + (##) Configure PCD pin-out + (##) Configure PCD NVIC interrupt + + (#)Associate the Upper USB device stack to the HAL PCD Driver: + (##) hpcd.pData = pdev; + + (#)Enable HCD transmission and reception: + (##) HAL_PCD_Start(); + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + + + +#ifdef HAL_PCD_MODULE_ENABLED + +#if defined(STM32F102x6) || defined(STM32F102xB) || \ + defined(STM32F103x6) || defined(STM32F103xB) || \ + defined(STM32F103xE) || defined(STM32F103xG) || \ + defined(STM32F105xC) || defined(STM32F107xC) + +/** @defgroup PCD PCD + * @brief PCD HAL module driver + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/** @defgroup PCD_Private_Macros PCD Private Macros + * @{ + */ +#define PCD_MIN(a, b) (((a) < (b)) ? (a) : (b)) +#define PCD_MAX(a, b) (((a) > (b)) ? (a) : (b)) +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup PCD_Private_Functions PCD Private Functions + * @{ + */ +#if defined (USB_OTG_FS) +static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum); +#endif /* USB_OTG_FS */ + +#if defined (USB) +static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd); +#endif /* USB */ +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PCD_Exported_Functions PCD Exported Functions + * @{ + */ + +/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + =============================================================================== + ##### Initialization and de-initialization functions ##### + =============================================================================== + [..] This section provides functions allowing to: + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the PCD according to the specified + * parameters in the PCD_InitTypeDef and create the associated handle. + * @param hpcd: PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd) +{ + uint32_t index = 0; + + /* Check the PCD handle allocation */ + if(hpcd == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance)); + + if(hpcd->State == HAL_PCD_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hpcd->Lock = HAL_UNLOCKED; + + /* Init the low level hardware : GPIO, CLOCK, NVIC... */ + HAL_PCD_MspInit(hpcd); + } + + hpcd->State = HAL_PCD_STATE_BUSY; + + /* Disable the Interrupts */ + __HAL_PCD_DISABLE(hpcd); + + /*Init the Core (common init.) */ + USB_CoreInit(hpcd->Instance, hpcd->Init); + + /* Force Device Mode*/ + USB_SetCurrentMode(hpcd->Instance , USB_DEVICE_MODE); + + /* Init endpoints structures */ + for (index = 0; index < 15 ; index++) + { + /* Init ep structure */ + hpcd->IN_ep[index].is_in = 1; + hpcd->IN_ep[index].num = index; + hpcd->IN_ep[index].tx_fifo_num = index; + /* Control until ep is actvated */ + hpcd->IN_ep[index].type = EP_TYPE_CTRL; + hpcd->IN_ep[index].maxpacket = 0; + hpcd->IN_ep[index].xfer_buff = 0; + hpcd->IN_ep[index].xfer_len = 0; + } + + for (index = 0; index < 15 ; index++) + { + hpcd->OUT_ep[index].is_in = 0; + hpcd->OUT_ep[index].num = index; + hpcd->IN_ep[index].tx_fifo_num = index; + /* Control until ep is activated */ + hpcd->OUT_ep[index].type = EP_TYPE_CTRL; + hpcd->OUT_ep[index].maxpacket = 0; + hpcd->OUT_ep[index].xfer_buff = 0; + hpcd->OUT_ep[index].xfer_len = 0; + } + + /* Init Device */ + USB_DevInit(hpcd->Instance, hpcd->Init); + + hpcd->USB_Address = 0; + hpcd->State= HAL_PCD_STATE_READY; + + USB_DevDisconnect (hpcd->Instance); + return HAL_OK; +} + +/** + * @brief DeInitializes the PCD peripheral + * @param hpcd: PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd) +{ + /* Check the PCD handle allocation */ + if(hpcd == NULL) + { + return HAL_ERROR; + } + + hpcd->State = HAL_PCD_STATE_BUSY; + + /* Stop Device */ + HAL_PCD_Stop(hpcd); + + /* DeInit the low level hardware */ + HAL_PCD_MspDeInit(hpcd); + + hpcd->State = HAL_PCD_STATE_RESET; + + return HAL_OK; +} + +/** + * @brief Initializes the PCD MSP. + * @param hpcd: PCD handle + * @retval None + */ +__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes PCD MSP. + * @param hpcd: PCD handle + * @retval None + */ +__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group2 IO operation functions + * @brief Data transfers functions + * +@verbatim + =============================================================================== + ##### IO operation functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to manage the PCD data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Start The USB Device. + * @param hpcd: PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + HAL_PCDEx_SetConnectionState (hpcd, 1); + USB_DevConnect (hpcd->Instance); + __HAL_PCD_ENABLE(hpcd); + __HAL_UNLOCK(hpcd); + return HAL_OK; +} + +/** + * @brief Stop The USB Device. + * @param hpcd: PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + __HAL_PCD_DISABLE(hpcd); + USB_StopDevice(hpcd->Instance); + USB_DevDisconnect (hpcd->Instance); + __HAL_UNLOCK(hpcd); + return HAL_OK; +} + +#if defined (USB_OTG_FS) +/** + * @brief This function handles PCD interrupt request. + * @param hpcd: PCD handle + * @retval HAL status + */ +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + uint32_t index = 0, ep_intr = 0, epint = 0, epnum = 0; + uint32_t fifoemptymsk = 0, temp = 0; + USB_OTG_EPTypeDef *ep = NULL; + + /* ensure that we are in device mode */ + if (USB_GetMode(hpcd->Instance) == USB_OTG_MODE_DEVICE) + { + /* avoid spurious interrupt */ + if(__HAL_PCD_IS_INVALID_INTERRUPT(hpcd)) + { + return; + } + + if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_MMIS)) + { + /* incorrect mode, acknowledge the interrupt */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_MMIS); + } + + if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OEPINT)) + { + epnum = 0; + + /* Read in the device interrupt bits */ + ep_intr = USB_ReadDevAllOutEpInterrupt(hpcd->Instance); + + while ( ep_intr ) + { + if (ep_intr & 0x1) + { + epint = USB_ReadDevOutEPInterrupt(hpcd->Instance, epnum); + + if(( epint & USB_OTG_DOEPINT_XFRC) == USB_OTG_DOEPINT_XFRC) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_XFRC); + + HAL_PCD_DataOutStageCallback(hpcd, epnum); + } + + if(( epint & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP) + { + /* Inform the upper layer that a setup packet is available */ + HAL_PCD_SetupStageCallback(hpcd); + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STUP); + } + + if(( epint & USB_OTG_DOEPINT_OTEPDIS) == USB_OTG_DOEPINT_OTEPDIS) + { + CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPDIS); + } + } + epnum++; + ep_intr >>= 1; + } + } + + if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IEPINT)) + { + /* Read in the device interrupt bits */ + ep_intr = USB_ReadDevAllInEpInterrupt(hpcd->Instance); + + epnum = 0; + + while ( ep_intr ) + { + if (ep_intr & 0x1) /* In ITR */ + { + epint = USB_ReadDevInEPInterrupt(hpcd->Instance, epnum); + + if(( epint & USB_OTG_DIEPINT_XFRC) == USB_OTG_DIEPINT_XFRC) + { + fifoemptymsk = 0x1 << epnum; + USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk; + + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_XFRC); + + HAL_PCD_DataInStageCallback(hpcd, epnum); + } + if(( epint & USB_OTG_DIEPINT_TOC) == USB_OTG_DIEPINT_TOC) + { + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_TOC); + } + if(( epint & USB_OTG_DIEPINT_ITTXFE) == USB_OTG_DIEPINT_ITTXFE) + { + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_ITTXFE); + } + if(( epint & USB_OTG_DIEPINT_INEPNE) == USB_OTG_DIEPINT_INEPNE) + { + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_INEPNE); + } + if(( epint & USB_OTG_DIEPINT_EPDISD) == USB_OTG_DIEPINT_EPDISD) + { + CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_EPDISD); + } + if(( epint & USB_OTG_DIEPINT_TXFE) == USB_OTG_DIEPINT_TXFE) + { + PCD_WriteEmptyTxFifo(hpcd , epnum); + } + } + epnum++; + ep_intr >>= 1; + } + } + + /* Handle Resume Interrupt */ + if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT)) + { + /* Clear the Remote Wake-up signalling */ + USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG; + + HAL_PCD_ResumeCallback(hpcd); + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT); + } + + /* Handle Suspend Interrupt */ + if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP)) + { + if((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS) + { + + HAL_PCD_SuspendCallback(hpcd); + } + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP); + } + + /* Handle Reset Interrupt */ + if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBRST)) + { + USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG; + USB_FlushTxFifo(hpcd->Instance , 0 ); + + for (index = 0; index < hpcd->Init.dev_endpoints ; index++) + { + USBx_INEP(index)->DIEPINT = 0xFF; + USBx_OUTEP(index)->DOEPINT = 0xFF; + } + USBx_DEVICE->DAINT = 0xFFFFFFFF; + USBx_DEVICE->DAINTMSK |= 0x10001; + + USBx_DEVICE->DOEPMSK |= (USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM); + USBx_DEVICE->DIEPMSK |= (USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM | USB_OTG_DIEPMSK_EPDM); + + /* Set Default Address to 0 */ + USBx_DEVICE->DCFG &= ~USB_OTG_DCFG_DAD; + + /* setup EP0 to receive SETUP packets */ + USB_EP0_OutStart(hpcd->Instance, (uint8_t *)hpcd->Setup); + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBRST); + } + + /* Handle Enumeration done Interrupt */ + if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE)) + { + USB_ActivateSetup(hpcd->Instance); + hpcd->Instance->GUSBCFG &= ~USB_OTG_GUSBCFG_TRDT; + + hpcd->Init.speed = USB_OTG_SPEED_FULL; + hpcd->Init.ep0_mps = USB_OTG_FS_MAX_PACKET_SIZE ; + hpcd->Instance->GUSBCFG |= (uint32_t)((USBD_FS_TRDT_VALUE << 10) & USB_OTG_GUSBCFG_TRDT); + + HAL_PCD_ResetCallback(hpcd); + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE); + } + + /* Handle RxQLevel Interrupt */ + if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_RXFLVL)) + { + USB_MASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL); + temp = USBx->GRXSTSP; + ep = &hpcd->OUT_ep[temp & USB_OTG_GRXSTSP_EPNUM]; + + if(((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_DATA_UPDT) + { + if((temp & USB_OTG_GRXSTSP_BCNT) != 0) + { + USB_ReadPacket(USBx, ep->xfer_buff, (temp & USB_OTG_GRXSTSP_BCNT) >> 4); + ep->xfer_buff += (temp & USB_OTG_GRXSTSP_BCNT) >> 4; + ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4; + } + } + else if (((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_SETUP_UPDT) + { + USB_ReadPacket(USBx, (uint8_t *)hpcd->Setup, 8); + ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4; + } + USB_UNMASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL); + } + + /* Handle SOF Interrupt */ + if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SOF)) + { + HAL_PCD_SOFCallback(hpcd); + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SOF); + } + + /* Handle Incomplete ISO IN Interrupt */ + if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR)) + { + HAL_PCD_ISOINIncompleteCallback(hpcd, epnum); + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR); + } + + /* Handle Incomplete ISO OUT Interrupt */ + if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT)) + { + HAL_PCD_ISOOUTIncompleteCallback(hpcd, epnum); + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT); + } + + /* Handle Connection event Interrupt */ + if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT)) + { + HAL_PCD_ConnectCallback(hpcd); + __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT); + } + + /* Handle Disconnection event Interrupt */ + if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OTGINT)) + { + temp = hpcd->Instance->GOTGINT; + + if((temp & USB_OTG_GOTGINT_SEDET) == USB_OTG_GOTGINT_SEDET) + { + HAL_PCD_DisconnectCallback(hpcd); + } + hpcd->Instance->GOTGINT |= temp; + } + } +} +#endif /* USB_OTG_FS */ + +#if defined (USB) +/** + * @brief This function handles PCD interrupt request. + * @param hpcd: PCD handle + * @retval HAL status + */ +void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd) +{ + uint32_t wInterrupt_Mask = 0; + + if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_CTR)) + { + /* servicing of the endpoint correct transfer interrupt */ + /* clear of the CTR flag into the sub */ + PCD_EP_ISR_Handler(hpcd); + } + + if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_RESET)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_RESET); + HAL_PCD_ResetCallback(hpcd); + HAL_PCD_SetAddress(hpcd, 0); + } + + if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_PMAOVR)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_PMAOVR); + } + if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_ERR)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ERR); + } + + if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_WKUP)) + { + hpcd->Instance->CNTR &= ~(USB_CNTR_LP_MODE); + + /*set wInterrupt_Mask global variable*/ + wInterrupt_Mask = USB_CNTR_CTRM | USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_ERRM \ + | USB_CNTR_ESOFM | USB_CNTR_RESETM; + + /*Set interrupt mask*/ + hpcd->Instance->CNTR = wInterrupt_Mask; + + HAL_PCD_ResumeCallback(hpcd); + + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_WKUP); + } + + if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_SUSP)) + { + /* clear of the ISTR bit must be done after setting of CNTR_FSUSP */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SUSP); + + /* Force low-power mode in the macrocell */ + hpcd->Instance->CNTR |= USB_CNTR_FSUSP; + hpcd->Instance->CNTR |= USB_CNTR_LP_MODE; + if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_WKUP) == 0) + { + HAL_PCD_SuspendCallback(hpcd); + } + } + + if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_SOF)) + { + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_SOF); + HAL_PCD_SOFCallback(hpcd); + } + + if (__HAL_PCD_GET_FLAG (hpcd, USB_ISTR_ESOF)) + { + /* clear ESOF flag in ISTR */ + __HAL_PCD_CLEAR_FLAG(hpcd, USB_ISTR_ESOF); + } +} +#endif /* USB */ + +/** + * @brief Data out stage callbacks + * @param hpcd: PCD handle + * @param epnum: endpoint number + * @retval None + */ + __weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DataOutStageCallback could be implemented in the user file + */ +} + +/** + * @brief Data IN stage callbacks + * @param hpcd: PCD handle + * @param epnum: endpoint number + * @retval None + */ + __weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DataInStageCallback could be implemented in the user file + */ +} +/** + * @brief Setup stage callback + * @param hpcd: PCD handle + * @retval None + */ + __weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SetupStageCallback could be implemented in the user file + */ +} + +/** + * @brief USB Start Of Frame callbacks + * @param hpcd: PCD handle + * @retval None + */ + __weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SOFCallback could be implemented in the user file + */ +} + +/** + * @brief USB Reset callbacks + * @param hpcd: PCD handle + * @retval None + */ + __weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ResetCallback could be implemented in the user file + */ +} + +/** + * @brief Suspend event callbacks + * @param hpcd: PCD handle + * @retval None + */ + __weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_SuspendCallback could be implemented in the user file + */ +} + +/** + * @brief Resume event callbacks + * @param hpcd: PCD handle + * @retval None + */ + __weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ResumeCallback could be implemented in the user file + */ +} + +/** + * @brief Incomplete ISO OUT callbacks + * @param hpcd: PCD handle + * @param epnum: endpoint number + * @retval None + */ + __weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Incomplete ISO IN callbacks + * @param hpcd: PCD handle + * @param epnum: endpoint number + * @retval None + */ + __weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(epnum); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file + */ +} + +/** + * @brief Connection event callbacks + * @param hpcd: PCD handle + * @retval None + */ + __weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_ConnectCallback could be implemented in the user file + */ +} + +/** + * @brief Disconnection event callbacks + * @param hpcd: PCD handle + * @retval None + */ + __weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + /* NOTE : This function should not be modified, when the callback is needed, + the HAL_PCD_DisconnectCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the PCD data + transfers. + +@endverbatim + * @{ + */ + +/** + * @brief Connect the USB device + * @param hpcd: PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + HAL_PCDEx_SetConnectionState (hpcd, 1); + USB_DevConnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + return HAL_OK; +} + +/** + * @brief Disconnect the USB device + * @param hpcd: PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd) +{ + __HAL_LOCK(hpcd); + HAL_PCDEx_SetConnectionState (hpcd, 0); + USB_DevDisconnect(hpcd->Instance); + __HAL_UNLOCK(hpcd); + return HAL_OK; +} + +/** + * @brief Set the USB Device address + * @param hpcd: PCD handle + * @param address: new device address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address) +{ + __HAL_LOCK(hpcd); + hpcd->USB_Address = address; + USB_SetDevAddress(hpcd->Instance, address); + __HAL_UNLOCK(hpcd); + return HAL_OK; +} +/** + * @brief Open and configure an endpoint + * @param hpcd: PCD handle + * @param ep_addr: endpoint address + * @param ep_mps: endpoint max packet size + * @param ep_type: endpoint type + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type) +{ + HAL_StatusTypeDef ret = HAL_OK; + PCD_EPTypeDef *ep = NULL; + + if ((ep_addr & 0x80) == 0x80) + { + ep = &hpcd->IN_ep[ep_addr & 0x7F]; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & 0x7F]; + } + ep->num = ep_addr & 0x7F; + + ep->is_in = (0x80 & ep_addr) != 0; + ep->maxpacket = ep_mps; + ep->type = ep_type; + + __HAL_LOCK(hpcd); + USB_ActivateEndpoint(hpcd->Instance , ep); + __HAL_UNLOCK(hpcd); + return ret; +} + +/** + * @brief Deactivate an endpoint + * @param hpcd: PCD handle + * @param ep_addr: endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep = NULL; + + if ((ep_addr & 0x80) == 0x80) + { + ep = &hpcd->IN_ep[ep_addr & 0x7F]; + } + else + { + ep = &hpcd->OUT_ep[ep_addr & 0x7F]; + } + ep->num = ep_addr & 0x7F; + + ep->is_in = (0x80 & ep_addr) != 0; + + __HAL_LOCK(hpcd); + USB_DeactivateEndpoint(hpcd->Instance , ep); + __HAL_UNLOCK(hpcd); + return HAL_OK; +} + + +/** + * @brief Receive an amount of data + * @param hpcd: PCD handle + * @param ep_addr: endpoint address + * @param pBuf: pointer to the reception buffer + * @param len: amount of data to be received + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + PCD_EPTypeDef *ep = NULL; + + ep = &hpcd->OUT_ep[ep_addr & 0x7F]; + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + ep->xfer_len = len; + ep->xfer_count = 0; + ep->is_in = 0; + ep->num = ep_addr & 0x7F; + + __HAL_LOCK(hpcd); + + if ((ep_addr & 0x7F) == 0 ) + { + USB_EP0StartXfer(hpcd->Instance , ep); + } + else + { + USB_EPStartXfer(hpcd->Instance , ep); + } + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Get Received Data Size + * @param hpcd: PCD handle + * @param ep_addr: endpoint address + * @retval Data Size + */ +uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + return hpcd->OUT_ep[ep_addr & 0x7F].xfer_count; +} +/** + * @brief Send an amount of data + * @param hpcd: PCD handle + * @param ep_addr: endpoint address + * @param pBuf: pointer to the transmission buffer + * @param len: amount of data to be sent + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len) +{ + PCD_EPTypeDef *ep = NULL; + + ep = &hpcd->IN_ep[ep_addr & 0x7F]; + + /*setup and start the Xfer */ + ep->xfer_buff = pBuf; + ep->xfer_len = len; + ep->xfer_count = 0; + ep->is_in = 1; + ep->num = ep_addr & 0x7F; + + __HAL_LOCK(hpcd); + + if ((ep_addr & 0x7F) == 0 ) + { + USB_EP0StartXfer(hpcd->Instance , ep); + } + else + { + USB_EPStartXfer(hpcd->Instance , ep); + } + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Set a STALL condition over an endpoint + * @param hpcd: PCD handle + * @param ep_addr: endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep = NULL; + + if ((0x80 & ep_addr) == 0x80) + { + ep = &hpcd->IN_ep[ep_addr & 0x7F]; + } + else + { + ep = &hpcd->OUT_ep[ep_addr]; + } + + ep->is_stall = 1; + ep->num = ep_addr & 0x7F; + ep->is_in = ((ep_addr & 0x80) == 0x80); + + __HAL_LOCK(hpcd); + USB_EPSetStall(hpcd->Instance , ep); + if((ep_addr & 0x7F) == 0) + { + USB_EP0_OutStart(hpcd->Instance, (uint8_t *)hpcd->Setup); + } + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Clear a STALL condition over in an endpoint + * @param hpcd: PCD handle + * @param ep_addr: endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + PCD_EPTypeDef *ep = NULL; + + if ((0x80 & ep_addr) == 0x80) + { + ep = &hpcd->IN_ep[ep_addr & 0x7F]; + } + else + { + ep = &hpcd->OUT_ep[ep_addr]; + } + + ep->is_stall = 0; + ep->num = ep_addr & 0x7F; + ep->is_in = ((ep_addr & 0x80) == 0x80); + + __HAL_LOCK(hpcd); + USB_EPClearStall(hpcd->Instance , ep); + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief Flush an endpoint + * @param hpcd: PCD handle + * @param ep_addr: endpoint address + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr) +{ + __HAL_LOCK(hpcd); + + if ((ep_addr & 0x80) == 0x80) + { + USB_FlushTxFifo(hpcd->Instance, ep_addr & 0x7F); + } + else + { + USB_FlushRxFifo(hpcd->Instance); + } + + __HAL_UNLOCK(hpcd); + + return HAL_OK; +} + +/** + * @brief HAL_PCD_ActivateRemoteWakeup : active remote wakeup signalling + * @param hpcd: PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) +{ + return(USB_ActivateRemoteWakeup(hpcd->Instance)); +} + +/** + * @brief HAL_PCD_DeActivateRemoteWakeup : de-active remote wakeup signalling + * @param hpcd: PCD handle + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd) +{ + return(USB_DeActivateRemoteWakeup(hpcd->Instance)); +} +/** + * @} + */ + +/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions + * @brief Peripheral State functions + * +@verbatim + =============================================================================== + ##### Peripheral State functions ##### + =============================================================================== + [..] + This subsection permits to get in run-time the status of the peripheral + and the data flow. + +@endverbatim + * @{ + */ + +/** + * @brief Return the PCD state + * @param hpcd: PCD handle + * @retval HAL state + */ +PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd) +{ + return hpcd->State; +} + +/** + * @} + */ + +/** + * @} + */ + +/** @addtogroup PCD_Private_Functions + * @{ + */ +#if defined (USB_OTG_FS) +/** + * @brief DCD_WriteEmptyTxFifo + * check FIFO for the next packet to be loaded + * @param hpcd: PCD handle + * @param epnum : endpoint number + * This parameter can be a value from 0 to 15 + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum) +{ + USB_OTG_GlobalTypeDef *USBx = hpcd->Instance; + USB_OTG_EPTypeDef *ep = NULL; + int32_t len = 0; + uint32_t len32b = 0; + uint32_t fifoemptymsk = 0; + + ep = &hpcd->IN_ep[epnum]; + len = ep->xfer_len - ep->xfer_count; + + if (len > ep->maxpacket) + { + len = ep->maxpacket; + } + + len32b = (len + 3) / 4; + + while ((USBx_INEP(epnum)->DTXFSTS & USB_OTG_DTXFSTS_INEPTFSAV) > len32b && + ep->xfer_count < ep->xfer_len && + ep->xfer_len != 0) + { + /* Write the FIFO */ + len = ep->xfer_len - ep->xfer_count; + + if (len > ep->maxpacket) + { + len = ep->maxpacket; + } + len32b = (len + 3) / 4; + + USB_WritePacket(USBx, ep->xfer_buff, epnum, len); + + ep->xfer_buff += len; + ep->xfer_count += len; + } + + if(len <= 0) + { + fifoemptymsk = 0x1 << epnum; + USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk; + + } + + return HAL_OK; +} +#endif /* USB_OTG_FS */ + +#if defined (USB) +/** + * @brief This function handles PCD Endpoint interrupt request. + * @param hpcd: PCD handle + * @retval HAL status + */ +static HAL_StatusTypeDef PCD_EP_ISR_Handler(PCD_HandleTypeDef *hpcd) +{ + PCD_EPTypeDef *ep = NULL; + uint16_t count = 0; + uint8_t epindex = 0; + __IO uint16_t wIstr = 0; + __IO uint16_t wEPVal = 0; + + /* stay in loop while pending interrupts */ + while (((wIstr = hpcd->Instance->ISTR) & USB_ISTR_CTR) != 0) + { + /* extract highest priority endpoint number */ + epindex = (uint8_t)(wIstr & USB_ISTR_EP_ID); + + if (epindex == 0) + { + /* Decode and service control endpoint interrupt */ + + /* DIR bit = origin of the interrupt */ + if ((wIstr & USB_ISTR_DIR) == 0) + { + /* DIR = 0 */ + + /* DIR = 0 => IN int */ + /* DIR = 0 implies that (EP_CTR_TX = 1) always */ + PCD_CLEAR_TX_EP_CTR(hpcd->Instance, PCD_ENDP0); + ep = &hpcd->IN_ep[0]; + + ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); + ep->xfer_buff += ep->xfer_count; + + /* TX COMPLETE */ + HAL_PCD_DataInStageCallback(hpcd, 0); + + + if((hpcd->USB_Address > 0)&& ( ep->xfer_len == 0)) + { + hpcd->Instance->DADDR = (hpcd->USB_Address | USB_DADDR_EF); + hpcd->USB_Address = 0; + } + + } + else + { + /* DIR = 1 */ + + /* DIR = 1 & CTR_RX => SETUP or OUT int */ + /* DIR = 1 & (CTR_TX | CTR_RX) => 2 int pending */ + ep = &hpcd->OUT_ep[0]; + wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, PCD_ENDP0); + + if ((wEPVal & USB_EP_SETUP) != 0) + { + /* Get SETUP Packet*/ + ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + USB_ReadPMA(hpcd->Instance, (uint8_t*)hpcd->Setup ,ep->pmaadress , ep->xfer_count); + /* SETUP bit kept frozen while CTR_RX = 1*/ + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); + + /* Process SETUP Packet*/ + HAL_PCD_SetupStageCallback(hpcd); + } + + else if ((wEPVal & USB_EP_CTR_RX) != 0) + { + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, PCD_ENDP0); + /* Get Control Data OUT Packet*/ + ep->xfer_count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + + if (ep->xfer_count != 0) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, ep->xfer_count); + ep->xfer_buff+=ep->xfer_count; + } + + /* Process Control Data OUT Packet*/ + HAL_PCD_DataOutStageCallback(hpcd, 0); + + PCD_SET_EP_RX_CNT(hpcd->Instance, PCD_ENDP0, ep->maxpacket); + PCD_SET_EP_RX_STATUS(hpcd->Instance, PCD_ENDP0, USB_EP_RX_VALID); + } + } + } + else + { + /* Decode and service non control endpoints interrupt */ + + /* process related endpoint register */ + wEPVal = PCD_GET_ENDPOINT(hpcd->Instance, epindex); + if ((wEPVal & USB_EP_CTR_RX) != 0) + { + /* clear int flag */ + PCD_CLEAR_RX_EP_CTR(hpcd->Instance, epindex); + ep = &hpcd->OUT_ep[epindex]; + + /* OUT double Buffering*/ + if (ep->doublebuffer == 0) + { + count = PCD_GET_EP_RX_CNT(hpcd->Instance, ep->num); + if (count != 0) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, count); + } + } + else + { + if (PCD_GET_ENDPOINT(hpcd->Instance, ep->num) & USB_EP_DTOG_RX) + { + /*read from endpoint BUF0Addr buffer*/ + count = PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + if (count != 0) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, count); + } + } + else + { + /*read from endpoint BUF1Addr buffer*/ + count = PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + if (count != 0) + { + USB_ReadPMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, count); + } + } + PCD_FreeUserBuffer(hpcd->Instance, ep->num, PCD_EP_DBUF_OUT); + } + /*multi-packet on the NON control OUT endpoint*/ + ep->xfer_count+=count; + ep->xfer_buff+=count; + + if ((ep->xfer_len == 0) || (count < ep->maxpacket)) + { + /* RX COMPLETE */ + HAL_PCD_DataOutStageCallback(hpcd, ep->num); + } + else + { + HAL_PCD_EP_Receive(hpcd, ep->num, ep->xfer_buff, ep->xfer_len); + } + + } /* if((wEPVal & EP_CTR_RX) */ + + if ((wEPVal & USB_EP_CTR_TX) != 0) + { + ep = &hpcd->IN_ep[epindex]; + + /* clear int flag */ + PCD_CLEAR_TX_EP_CTR(hpcd->Instance, epindex); + + /* IN double Buffering*/ + if (ep->doublebuffer == 0) + { + ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); + if (ep->xfer_count != 0) + { + USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaadress, ep->xfer_count); + } + } + else + { + if (PCD_GET_ENDPOINT(hpcd->Instance, ep->num) & USB_EP_DTOG_TX) + { + /*read from endpoint BUF0Addr buffer*/ + ep->xfer_count = PCD_GET_EP_DBUF0_CNT(hpcd->Instance, ep->num); + if (ep->xfer_count != 0) + { + USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr0, ep->xfer_count); + } + } + else + { + /*read from endpoint BUF1Addr buffer*/ + ep->xfer_count = PCD_GET_EP_DBUF1_CNT(hpcd->Instance, ep->num); + if (ep->xfer_count != 0) + { + USB_WritePMA(hpcd->Instance, ep->xfer_buff, ep->pmaaddr1, ep->xfer_count); + } + } + PCD_FreeUserBuffer(hpcd->Instance, ep->num, PCD_EP_DBUF_IN); + } + /*multi-packet on the NON control IN endpoint*/ + ep->xfer_count = PCD_GET_EP_TX_CNT(hpcd->Instance, ep->num); + ep->xfer_buff+=ep->xfer_count; + + /* Zero Length Packet? */ + if (ep->xfer_len == 0) + { + /* TX COMPLETE */ + HAL_PCD_DataInStageCallback(hpcd, ep->num); + } + else + { + HAL_PCD_EP_Transmit(hpcd, ep->num, ep->xfer_buff, ep->xfer_len); + } + } + } + } + return HAL_OK; +} +#endif /* USB */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32F102x6 || STM32F102xB || */ + /* STM32F103x6 || STM32F103xB || */ + /* STM32F103xE || STM32F103xG || */ + /* STM32F105xC || STM32F107xC */ + +#endif /* HAL_PCD_MODULE_ENABLED */ + + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c new file mode 100644 index 0000000..b34328a --- /dev/null +++ b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pcd_ex.c @@ -0,0 +1,252 @@ +/** + ****************************************************************************** + * @file stm32f1xx_hal_pcd_ex.c + * @author MCD Application Team + * @version V1.0.4 + * @date 29-April-2016 + * @brief Extended PCD HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Extended features functions: Update FIFO configuration, + * PMA configuration for EPs + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +#ifdef HAL_PCD_MODULE_ENABLED + +#if defined(STM32F102x6) || defined(STM32F102xB) || \ + defined(STM32F103x6) || defined(STM32F103xB) || \ + defined(STM32F103xE) || defined(STM32F103xG) || \ + defined(STM32F105xC) || defined(STM32F107xC) + + +/** @defgroup PCDEx PCDEx + * @brief PCD Extended HAL module driver + * @{ + */ + + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* Exported functions --------------------------------------------------------*/ +/** @defgroup PCDEx_Exported_Functions PCDEx Exported Functions + * @{ + */ + +/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions + * @brief PCDEx control functions + * +@verbatim + =============================================================================== + ##### Extended Peripheral Control functions ##### + =============================================================================== + [..] This section provides functions allowing to: + (+) Update FIFO (USB_OTG_FS) + (+) Update PMA configuration (USB) + +@endverbatim + * @{ + */ + +#if defined (USB_OTG_FS) +/** + * @brief Set Tx FIFO + * @param hpcd: PCD handle + * @param fifo: The number of Tx fifo + * @param size: Fifo size + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size) +{ + uint8_t index = 0; + uint32_t Tx_Offset = 0; + + /* TXn min size = 16 words. (n : Transmit FIFO index) + When a TxFIFO is not used, the Configuration should be as follows: + case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes) + --> Txm can use the space allocated for Txn. + case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes) + --> Txn should be configured with the minimum space of 16 words + The FIFO is used optimally when used TxFIFOs are allocated in the top + of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones. + When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */ + + Tx_Offset = hpcd->Instance->GRXFSIZ; + + if(fifo == 0) + { + hpcd->Instance->DIEPTXF0_HNPTXFSIZ = (size << 16) | Tx_Offset; + } + else + { + Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16; + for (index = 0; index < (fifo - 1); index++) + { + Tx_Offset += (hpcd->Instance->DIEPTXF[index] >> 16); + } + + /* Multiply Tx_Size by 2 to get higher performance */ + hpcd->Instance->DIEPTXF[fifo - 1] = (size << 16) | Tx_Offset; + + } + + return HAL_OK; +} + +/** + * @brief Set Rx FIFO + * @param hpcd: PCD handle + * @param size: Size of Rx fifo + * @retval HAL status + */ +HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size) +{ + hpcd->Instance->GRXFSIZ = size; + return HAL_OK; +} +#endif /* USB_OTG_FS */ + +#if defined (USB) +/** + * @brief Configure PMA for EP + * @param hpcd : Device instance + * @param ep_addr: endpoint address + * @param ep_kind: endpoint Kind + * USB_SNG_BUF: Single Buffer used + * USB_DBL_BUF: Double Buffer used + * @param pmaadress: EP address in The PMA: In case of single buffer endpoint + * this parameter is 16-bit value providing the address + * in PMA allocated to endpoint. + * In case of double buffer endpoint this parameter + * is a 32-bit value providing the endpoint buffer 0 address + * in the LSB part of 32-bit value and endpoint buffer 1 address + * in the MSB part of 32-bit value. + * @retval HAL status + */ + +HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, + uint16_t ep_addr, + uint16_t ep_kind, + uint32_t pmaadress) + +{ + PCD_EPTypeDef *ep = NULL; + + /* initialize ep structure*/ + if ((0x80 & ep_addr) == 0x80) + { + ep = &hpcd->IN_ep[ep_addr & 0x7F]; + } + else + { + ep = &hpcd->OUT_ep[ep_addr]; + } + + /* Here we check if the endpoint is single or double Buffer*/ + if (ep_kind == PCD_SNG_BUF) + { + /*Single Buffer*/ + ep->doublebuffer = 0; + /*Configure te PMA*/ + ep->pmaadress = (uint16_t)pmaadress; + } + else /*USB_DBL_BUF*/ + { + /*Double Buffer Endpoint*/ + ep->doublebuffer = 1; + /*Configure the PMA*/ + ep->pmaaddr0 = pmaadress & 0xFFFF; + ep->pmaaddr1 = (pmaadress & 0xFFFF0000) >> 16; + } + + return HAL_OK; +} +#endif /* USB */ +/** + * @} + */ + +/** @defgroup PCDEx_Exported_Functions_Group2 Peripheral State functions + * @brief Manage device connection state + * @{ + */ +/** + * @brief Software Device Connection, + * this function is not required by USB OTG FS peripheral, it is used + * only by USB Device FS peripheral. + * @param hpcd: PCD handle + * @param state: connection state (0 : disconnected / 1: connected) + * @retval None + */ +__weak void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hpcd); + UNUSED(state); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_PCDEx_SetConnectionState could be implemented in the user file + */ +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* STM32F102x6 || STM32F102xB || */ + /* STM32F103x6 || STM32F103xB || */ + /* STM32F103xE || STM32F103xG || */ + /* STM32F105xC || STM32F107xC */ + +#endif /* HAL_PCD_MODULE_ENABLED */ + + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c new file mode 100644 index 0000000..24f343d --- /dev/null +++ b/stm32cubemx/Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_ll_usb.c @@ -0,0 +1,2211 @@ +/** + ****************************************************************************** + * @file stm32f1xx_ll_usb.c + * @author MCD Application Team + * @version V1.0.4 + * @date 29-April-2016 + * @brief USB Low Layer HAL module driver. + * + * This file provides firmware functions to manage the following + * functionalities of the USB Peripheral Controller: + * + Initialization/de-initialization functions + * + I/O operation functions + * + Peripheral Control functions + * + Peripheral State functions + * + @verbatim + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Fill parameters of Init structure in USB_OTG_CfgTypeDef structure. + + (#) Call USB_CoreInit() API to initialize the USB Core peripheral. + + (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes. + + @endverbatim + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx_hal.h" + +/** @addtogroup STM32F1xx_HAL_Driver + * @{ + */ + +/** @defgroup USB_LL USB Low Layer + * @brief Low layer module for USB_FS and USB_OTG_FS drivers + * @{ + */ + +#if defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) + +#if defined(STM32F102x6) || defined(STM32F102xB) || \ + defined(STM32F103x6) || defined(STM32F103xB) || \ + defined(STM32F103xE) || defined(STM32F103xG) || \ + defined(STM32F105xC) || defined(STM32F107xC) + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/* Private macros ------------------------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +#if defined (USB_OTG_FS) +/** @defgroup USB_LL_Private_Functions USB Low Layer Private Functions + * @{ + */ +static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx); +/** + * @} + */ +#endif /* USB_OTG_FS */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup USB_LL_Exported_Functions USB Low Layer Exported Functions + * @{ + */ + +/** @defgroup USB_LL_Exported_Functions_Group1 Peripheral Control functions + * @brief management functions + * +@verbatim + =============================================================================== + ##### Peripheral Control functions ##### + =============================================================================== + [..] + This subsection provides a set of functions allowing to control the PCD data + transfers. + +@endverbatim + * @{ + */ + +/*============================================================================== + USB OTG FS peripheral available on STM32F105xx and STM32F107xx devices +==============================================================================*/ +#if defined (USB_OTG_FS) + +/** + * @brief Initializes the USB Core + * @param USBx: USB Instance + * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) +{ + /* Select FS Embedded PHY */ + USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL; + + /* Reset after a PHY select and set Host mode */ + USB_CoreReset(USBx); + + /* Deactivate the power down*/ + USBx->GCCFG = USB_OTG_GCCFG_PWRDWN; + + return HAL_OK; +} + +/** + * @brief USB_EnableGlobalInt + * Enables the controller's Global Int in the AHB Config reg + * @param USBx : Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx) +{ + USBx->GAHBCFG |= USB_OTG_GAHBCFG_GINT; + return HAL_OK; +} + +/** + * @brief USB_DisableGlobalInt + * Disable the controller's Global Int in the AHB Config reg + * @param USBx : Selected device + * @retval HAL status +*/ +HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx) +{ + USBx->GAHBCFG &= ~USB_OTG_GAHBCFG_GINT; + return HAL_OK; +} + +/** + * @brief USB_SetCurrentMode : Set functional mode + * @param USBx : Selected device + * @param mode : current core mode + * This parameter can be one of the these values: + * @arg USB_DEVICE_MODE: Peripheral mode mode + * @arg USB_HOST_MODE: Host mode + * @arg USB_DRD_MODE: Dual Role Device mode + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_ModeTypeDef mode) +{ + USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_FHMOD | USB_OTG_GUSBCFG_FDMOD); + + if ( mode == USB_HOST_MODE) + { + USBx->GUSBCFG |= USB_OTG_GUSBCFG_FHMOD; + } + else if ( mode == USB_DEVICE_MODE) + { + USBx->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD; + } + HAL_Delay(50); + + return HAL_OK; +} + +/** + * @brief USB_DevInit : Initializes the USB_OTG controller registers + * for device mode + * @param USBx : Selected device + * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) +{ + uint32_t index = 0; + + for (index = 0; index < 15 ; index++) + { + USBx->DIEPTXF[index] = 0; + } + + /*Activate VBUS Sensing B */ + USBx->GCCFG |= USB_OTG_GCCFG_VBUSBSEN; + + /* Restart the Phy Clock */ + USBx_PCGCCTL = 0; + + /* Device mode configuration */ + USBx_DEVICE->DCFG |= DCFG_FRAME_INTERVAL_80; + + /* Set Full speed phy */ + USB_SetDevSpeed (USBx , USB_OTG_SPEED_FULL); + + /* Flush the FIFOs */ + USB_FlushTxFifo(USBx , 0x10); /* all Tx FIFOs */ + USB_FlushRxFifo(USBx); + + /* Clear all pending Device Interrupts */ + USBx_DEVICE->DIEPMSK = 0; + USBx_DEVICE->DOEPMSK = 0; + USBx_DEVICE->DAINT = 0xFFFFFFFF; + USBx_DEVICE->DAINTMSK = 0; + + for (index = 0; index < cfg.dev_endpoints; index++) + { + if ((USBx_INEP(index)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA) + { + USBx_INEP(index)->DIEPCTL = (USB_OTG_DIEPCTL_EPDIS | USB_OTG_DIEPCTL_SNAK); + } + else + { + USBx_INEP(index)->DIEPCTL = 0; + } + + USBx_INEP(index)->DIEPTSIZ = 0; + USBx_INEP(index)->DIEPINT = 0xFF; + } + + for (index = 0; index < cfg.dev_endpoints; index++) + { + if ((USBx_OUTEP(index)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA) + { + USBx_OUTEP(index)->DOEPCTL = (USB_OTG_DOEPCTL_EPDIS | USB_OTG_DOEPCTL_SNAK); + } + else + { + USBx_OUTEP(index)->DOEPCTL = 0; + } + + USBx_OUTEP(index)->DOEPTSIZ = 0; + USBx_OUTEP(index)->DOEPINT = 0xFF; + } + + USBx_DEVICE->DIEPMSK &= ~(USB_OTG_DIEPMSK_TXFURM); + + /* Disable all interrupts. */ + USBx->GINTMSK = 0; + + /* Clear any pending interrupts */ + USBx->GINTSTS = 0xBFFFFFFF; + + /* Enable the common interrupts */ + USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; + + /* Enable interrupts matching to the Device mode ONLY */ + USBx->GINTMSK |= (USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_USBRST |\ + USB_OTG_GINTMSK_ENUMDNEM | USB_OTG_GINTMSK_IEPINT |\ + USB_OTG_GINTMSK_OEPINT | USB_OTG_GINTMSK_IISOIXFRM|\ + USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM); + + if(cfg.Sof_enable) + { + USBx->GINTMSK |= USB_OTG_GINTMSK_SOFM; + } + + if (cfg.vbus_sensing_enable == ENABLE) + { + USBx->GINTMSK |= (USB_OTG_GINTMSK_SRQIM | USB_OTG_GINTMSK_OTGINT); + } + + return HAL_OK; +} + +/** + * @brief USB_OTG_FlushTxFifo : Flush a Tx FIFO + * @param USBx : Selected device + * @param num : FIFO number + * This parameter can be a value from 1 to 15 + 15 means Flush all Tx FIFOs + * @retval HAL status + */ +HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num ) +{ + uint32_t count = 0; + + USBx->GRSTCTL = ( USB_OTG_GRSTCTL_TXFFLSH |(uint32_t)( num << 6)); + + do + { + if (++count > 200000) + { + return HAL_TIMEOUT; + } + } + while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH) == USB_OTG_GRSTCTL_TXFFLSH); + + return HAL_OK; +} + +/** + * @brief USB_FlushRxFifo : Flush Rx FIFO + * @param USBx : Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t count = 0; + + USBx->GRSTCTL = USB_OTG_GRSTCTL_RXFFLSH; + + do + { + if (++count > 200000) + { + return HAL_TIMEOUT; + } + } + while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_RXFFLSH) == USB_OTG_GRSTCTL_RXFFLSH); + + return HAL_OK; +} + +/** + * @brief USB_SetDevSpeed :Initializes the DevSpd field of DCFG register + * depending the PHY type and the enumeration speed of the device. + * @param USBx : Selected device + * @param speed : device speed + * This parameter can be one of the these values: + * @arg USB_OTG_SPEED_FULL: Full speed mode + * @arg USB_OTG_SPEED_LOW: Low speed mode + * @retval Hal status + */ +HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed) +{ + USBx_DEVICE->DCFG |= speed; + return HAL_OK; +} + +/** + * @brief USB_GetDevSpeed :Return the Dev Speed + * @param USBx : Selected device + * @retval speed : device speed + * This parameter can be one of the these values: + * @arg USB_OTG_SPEED_FULL: Full speed mode + * @arg USB_OTG_SPEED_LOW: Low speed mode + */ +uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx) +{ + uint8_t speed = 0; + + if (((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ)|| + ((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_FS_PHY_48MHZ)) + { + speed = USB_OTG_SPEED_FULL; + } + else if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ) + { + speed = USB_OTG_SPEED_LOW; + } + + return speed; +} + +/** + * @brief Activate and configure an endpoint + * @param USBx : Selected device + * @param ep: pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + if (ep->is_in) + { + /* Assign a Tx FIFO */ + ep->tx_fifo_num = ep->num; + } + /* Set initial data PID. */ + if (ep->type == EP_TYPE_BULK ) + { + ep->data_pid_start = 0; + } + + if (ep->is_in == 1) + { + USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num))); + + if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0) + { + USBx_INEP(ep->num)->DIEPCTL |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18 ) |\ + ((ep->num) << 22 ) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP)); + } + } + else + { + USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16); + + if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0) + { + USBx_OUTEP(ep->num)->DOEPCTL |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18 ) |\ + (USB_OTG_DIEPCTL_SD0PID_SEVNFRM)| (USB_OTG_DOEPCTL_USBAEP)); + } + } + + return HAL_OK; +} + +/** + * @brief De-activate and de-initialize an endpoint + * @param USBx : Selected device + * @param ep: pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + /* Read DEPCTLn register */ + if (ep->is_in == 1) + { + USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num)))); + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num)))); + USBx_INEP(ep->num)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP; + } + else + { + USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16)); + USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16)); + USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP; + } + return HAL_OK; +} + +/** + * @brief USB_EPStartXfer : setup and starts a transfer over an EP + * @param USBx : Selected device + * @param ep: pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep) +{ + uint16_t pktcnt = 0; + + /* IN endpoint */ + if (ep->is_in == 1) + { + /* Zero Length Packet? */ + if (ep->xfer_len == 0) + { + USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); + USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19)) ; + USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); + } + else + { + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); + USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); + USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (((ep->xfer_len + ep->maxpacket -1)/ ep->maxpacket) << 19)) ; + USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len); + + if (ep->type == EP_TYPE_ISOC) + { + USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_MULCNT); + USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_MULCNT & (1 << 29)); + } + } + + if (ep->type != EP_TYPE_ISOC) + { + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (ep->xfer_len > 0) + { + USBx_DEVICE->DIEPEMPMSK |= 1 << ep->num; + } + } + + if (ep->type == EP_TYPE_ISOC) + { + if ((USBx_DEVICE->DSTS & ( 1 << 8 )) == 0) + { + USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM; + } + else + { + USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; + } + } + + /* EP enable, IN data in FIFO */ + USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); + + if (ep->type == EP_TYPE_ISOC) + { + USB_WritePacket(USBx, ep->xfer_buff, ep->num, ep->xfer_len); + } + } + else /* OUT endpoint */ + { + /* Program the transfer size and packet count as follows: + * pktcnt = N + * xfersize = N * maxpacket + */ + USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ); + USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT); + + if (ep->xfer_len == 0) + { + USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->maxpacket); + USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19)); + } + else + { + pktcnt = (ep->xfer_len + ep->maxpacket -1)/ ep->maxpacket; + USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (pktcnt << 19)); + USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket * pktcnt)); + } + + if (ep->type == EP_TYPE_ISOC) + { + if ((USBx_DEVICE->DSTS & ( 1 << 8 )) == 0) + { + USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SODDFRM; + } + else + { + USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; + } + } + /* EP enable */ + USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA); + } + + return HAL_OK; +} + +/** + * @brief USB_EP0StartXfer : setup and starts a transfer over the EP 0 + * @param USBx : Selected device + * @param ep: pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep) +{ + /* IN endpoint */ + if (ep->is_in == 1) + { + /* Zero Length Packet? */ + if (ep->xfer_len == 0) + { + USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); + USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19)); + USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); + } + else + { + /* Program the transfer size and packet count + * as follows: xfersize = N * maxpacket + + * short_packet pktcnt = N + (short_packet + * exist ? 1 : 0) + */ + USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ); + USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT); + + if(ep->xfer_len > ep->maxpacket) + { + ep->xfer_len = ep->maxpacket; + } + USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19)); + USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len); + } + + /* Enable the Tx FIFO Empty Interrupt for this EP */ + if (ep->xfer_len > 0) + { + USBx_DEVICE->DIEPEMPMSK |= 1 << (ep->num); + } + + /* EP enable, IN data in FIFO */ + USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA); + } + else /* OUT endpoint */ + { + /* Program the transfer size and packet count as follows: + * pktcnt = N + * xfersize = N * maxpacket + */ + USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ); + USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT); + + if (ep->xfer_len > 0) + { + ep->xfer_len = ep->maxpacket; + } + + USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19)); + USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket)); + + /* EP enable */ + USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA); + } + + return HAL_OK; +} + +/** + * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated + * with the EP/channel + * @param USBx : Selected device + * @param src : pointer to source buffer + * @param ch_ep_num : endpoint or host channel number + * @param len : Number of bytes to write + * @retval HAL status + */ +HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len) +{ + uint32_t count32b = 0 , index = 0; + + count32b = (len + 3) / 4; + for (index = 0; index < count32b; index++, src += 4) + { + USBx_DFIFO(ch_ep_num) = *((__packed uint32_t *)src); + } + return HAL_OK; +} + +/** + * @brief USB_ReadPacket : read a packet from the Tx FIFO associated + * with the EP/channel + * @param USBx : Selected device + * @param dest : destination pointer + * @param len : Number of bytes to read + * @retval pointer to destination buffer + */ +void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len) +{ + uint32_t index = 0; + uint32_t count32b = (len + 3) / 4; + + for ( index = 0; index < count32b; index++, dest += 4 ) + { + *(__packed uint32_t *)dest = USBx_DFIFO(0); + + } + return ((void *)dest); +} + +/** + * @brief USB_EPSetStall : set a stall condition over an EP + * @param USBx : Selected device + * @param ep: pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep) +{ + if (ep->is_in == 1) + { + if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == 0) + { + USBx_INEP(ep->num)->DIEPCTL &= ~(USB_OTG_DIEPCTL_EPDIS); + } + USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_STALL; + } + else + { + if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == 0) + { + USBx_OUTEP(ep->num)->DOEPCTL &= ~(USB_OTG_DOEPCTL_EPDIS); + } + USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_STALL; + } + return HAL_OK; +} + +/** + * @brief USB_EPClearStall : Clear a stall condition over an EP + * @param USBx : Selected device + * @param ep: pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep) +{ + if (ep->is_in == 1) + { + USBx_INEP(ep->num)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL; + if (ep->type == EP_TYPE_INTR || ep->type == EP_TYPE_BULK) + { + USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; /* DATA0 */ + } + } + else + { + USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL; + if (ep->type == EP_TYPE_INTR || ep->type == EP_TYPE_BULK) + { + USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; /* DATA0 */ + } + } + return HAL_OK; +} + +/** + * @brief USB_StopDevice : Stop the usb device mode + * @param USBx : Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t index = 0; + + /* Clear Pending interrupt */ + for (index = 0; index < 15 ; index++) + { + USBx_INEP(index)->DIEPINT = 0xFF; + USBx_OUTEP(index)->DOEPINT = 0xFF; + } + USBx_DEVICE->DAINT = 0xFFFFFFFF; + + /* Clear interrupt masks */ + USBx_DEVICE->DIEPMSK = 0; + USBx_DEVICE->DOEPMSK = 0; + USBx_DEVICE->DAINTMSK = 0; + + /* Flush the FIFO */ + USB_FlushRxFifo(USBx); + USB_FlushTxFifo(USBx , 0x10 ); + + return HAL_OK; +} + +/** + * @brief USB_SetDevAddress : Stop the usb device mode + * @param USBx : Selected device + * @param address : new device address to be assigned + * This parameter can be a value from 0 to 255 + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address) +{ + USBx_DEVICE->DCFG &= ~ (USB_OTG_DCFG_DAD); + USBx_DEVICE->DCFG |= (address << 4) & USB_OTG_DCFG_DAD; + + return HAL_OK; +} + +/** + * @brief USB_DevConnect : Connect the USB device by enabling the pull-up/pull-down + * @param USBx : Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx) +{ + USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_SDIS ; + HAL_Delay(3); + + return HAL_OK; +} + +/** + * @brief USB_DevDisconnect : Disconnect the USB device by disabling the pull-up/pull-down + * @param USBx : Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx) +{ + USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS; + HAL_Delay(3); + + return HAL_OK; +} + +/** + * @brief USB_ReadInterrupts: return the global USB interrupt status + * @param USBx : Selected device + * @retval HAL status + */ +uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t tmpreg = 0; + + tmpreg = USBx->GINTSTS; + tmpreg &= USBx->GINTMSK; + return tmpreg; +} + +/** + * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status + * @param USBx : Selected device + * @retval HAL status + */ +uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t tmpreg = 0; + tmpreg = USBx_DEVICE->DAINT; + tmpreg &= USBx_DEVICE->DAINTMSK; + return ((tmpreg & 0xffff0000) >> 16); +} + +/** + * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status + * @param USBx : Selected device + * @retval HAL status + */ +uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t tmpreg = 0; + tmpreg = USBx_DEVICE->DAINT; + tmpreg &= USBx_DEVICE->DAINTMSK; + return ((tmpreg & 0xFFFF)); +} + +/** + * @brief Returns Device OUT EP Interrupt register + * @param USBx : Selected device + * @param epnum : endpoint number + * This parameter can be a value from 0 to 15 + * @retval Device OUT EP Interrupt register + */ +uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum) +{ + uint32_t tmpreg = 0; + tmpreg = USBx_OUTEP(epnum)->DOEPINT; + tmpreg &= USBx_DEVICE->DOEPMSK; + return tmpreg; +} + +/** + * @brief Returns Device IN EP Interrupt register + * @param USBx : Selected device + * @param epnum : endpoint number + * This parameter can be a value from 0 to 15 + * @retval Device IN EP Interrupt register + */ +uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum) +{ + uint32_t tmpreg = 0, msk = 0, emp = 0; + + msk = USBx_DEVICE->DIEPMSK; + emp = USBx_DEVICE->DIEPEMPMSK; + msk |= ((emp >> epnum) & 0x1) << 7; + tmpreg = USBx_INEP(epnum)->DIEPINT & msk; + return tmpreg; +} + +/** + * @brief USB_ClearInterrupts: clear a USB interrupt + * @param USBx : Selected device + * @param interrupt : interrupt flag + * @retval None + */ +void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt) +{ + USBx->GINTSTS |= interrupt; +} + +/** + * @brief Returns USB core mode + * @param USBx : Selected device + * @retval return core mode : Host or Device + * This parameter can be one of the these values: + * 0 : Host + * 1 : Device + */ +uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx) +{ + return ((USBx->GINTSTS ) & 0x1); +} + +/** + * @brief Activate EP0 for Setup transactions + * @param USBx : Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx) +{ + /* Set the MPS of the IN EP based on the enumeration speed */ + USBx_INEP(0)->DIEPCTL &= ~USB_OTG_DIEPCTL_MPSIZ; + + if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ) + { + USBx_INEP(0)->DIEPCTL |= 3; + } + USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGINAK; + + return HAL_OK; +} + +/** + * @brief Prepare the EP0 to start the first control setup + * @param USBx : Selected device + * @param psetup : pointer to setup packet + * @retval HAL status + */ +HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t *psetup) +{ + USBx_OUTEP(0)->DOEPTSIZ = 0; + USBx_OUTEP(0)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19)); + USBx_OUTEP(0)->DOEPTSIZ |= (3 * 8); + USBx_OUTEP(0)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_STUPCNT; + + return HAL_OK; +} + +/** + * @brief USB_HostInit : Initializes the USB OTG controller registers + * for Host mode + * @param USBx : Selected device + * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg) +{ + uint32_t index = 0; + + /* Restart the Phy Clock */ + USBx_PCGCCTL = 0; + + /* no VBUS sensing*/ + USBx->GCCFG &=~ (USB_OTG_GCCFG_VBUSASEN); + USBx->GCCFG &=~ (USB_OTG_GCCFG_VBUSBSEN); + + /* Disable the FS/LS support mode only */ + if((cfg.speed == USB_OTG_SPEED_FULL)&& + (USBx != USB_OTG_FS)) + { + USBx_HOST->HCFG |= USB_OTG_HCFG_FSLSS; + } + else + { + USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS); + } + + /* Make sure the FIFOs are flushed. */ + USB_FlushTxFifo(USBx, 0x10 ); /* all Tx FIFOs */ + USB_FlushRxFifo(USBx); + + /* Clear all pending HC Interrupts */ + for (index = 0; index < cfg.Host_channels; index++) + { + USBx_HC(index)->HCINT = 0xFFFFFFFF; + USBx_HC(index)->HCINTMSK = 0; + } + + /* Enable VBUS driving */ + USB_DriveVbus(USBx, 1); + + HAL_Delay(200); + + /* Disable all interrupts. */ + USBx->GINTMSK = 0; + + /* Clear any pending interrupts */ + USBx->GINTSTS = 0xFFFFFFFF; + + if(USBx == USB_OTG_FS) + { + /* set Rx FIFO size */ + USBx->GRXFSIZ = (uint32_t )0x80; + USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t )(((0x60 << 16)& USB_OTG_NPTXFD) | 0x80); + USBx->HPTXFSIZ = (uint32_t )(((0x40 << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0xE0); + } + + /* Enable the common interrupts */ + USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM; + + /* Enable interrupts matching to the Host mode ONLY */ + USBx->GINTMSK |= (USB_OTG_GINTMSK_PRTIM | USB_OTG_GINTMSK_HCIM |\ + USB_OTG_GINTMSK_SOFM |USB_OTG_GINTSTS_DISCINT|\ + USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM); + + return HAL_OK; +} + +/** + * @brief USB_InitFSLSPClkSel : Initializes the FSLSPClkSel field of the + * HCFG register on the PHY type and set the right frame interval + * @param USBx : Selected device + * @param freq : clock frequency + * This parameter can be one of the these values: + * HCFG_48_MHZ : Full Speed 48 MHz Clock + * HCFG_6_MHZ : Low Speed 6 MHz Clock + * @retval HAL status + */ +HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq) +{ + USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSPCS); + USBx_HOST->HCFG |= (freq & USB_OTG_HCFG_FSLSPCS); + + if (freq == HCFG_48_MHZ) + { + USBx_HOST->HFIR = (uint32_t)48000; + } + else if (freq == HCFG_6_MHZ) + { + USBx_HOST->HFIR = (uint32_t)6000; + } + return HAL_OK; +} + +/** +* @brief USB_OTG_ResetPort : Reset Host Port + * @param USBx : Selected device + * @retval HAL status + * @note : (1)The application must wait at least 10 ms + * before clearing the reset bit. + */ +HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx) +{ + __IO uint32_t hprt0 = 0; + + hprt0 = USBx_HPRT0; + + hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\ + USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG ); + + USBx_HPRT0 = (USB_OTG_HPRT_PRST | hprt0); + HAL_Delay (10); /* See Note #1 */ + USBx_HPRT0 = ((~USB_OTG_HPRT_PRST) & hprt0); + return HAL_OK; +} + +/** + * @brief USB_DriveVbus : activate or de-activate vbus + * @param state : VBUS state + * This parameter can be one of the these values: + * 0 : VBUS Active + * 1 : VBUS Inactive + * @retval HAL status +*/ +HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state) +{ + __IO uint32_t hprt0 = 0; + + hprt0 = USBx_HPRT0; + hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\ + USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG ); + + if (((hprt0 & USB_OTG_HPRT_PPWR) == 0 ) && (state == 1 )) + { + USBx_HPRT0 = (USB_OTG_HPRT_PPWR | hprt0); + } + if (((hprt0 & USB_OTG_HPRT_PPWR) == USB_OTG_HPRT_PPWR) && (state == 0 )) + { + USBx_HPRT0 = ((~USB_OTG_HPRT_PPWR) & hprt0); + } + return HAL_OK; +} + +/** + * @brief Return Host Core speed + * @param USBx : Selected device + * @retval speed : Host speed + * This parameter can be one of the these values: + * @arg USB_OTG_SPEED_FULL: Full speed mode + * @arg USB_OTG_SPEED_LOW: Low speed mode + */ +uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx) +{ + __IO uint32_t hprt0 = 0; + + hprt0 = USBx_HPRT0; + return ((hprt0 & USB_OTG_HPRT_PSPD) >> 17); +} + +/** + * @brief Return Host Current Frame number + * @param USBx : Selected device + * @retval current frame number +*/ +uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx) +{ + return (USBx_HOST->HFNUM & USB_OTG_HFNUM_FRNUM); +} + +/** + * @brief Initialize a host channel + * @param USBx : Selected device + * @param ch_num : Channel number + * This parameter can be a value from 1 to 15 + * @param epnum : Endpoint number + * This parameter can be a value from 1 to 15 + * @param dev_address : Current device address + * This parameter can be a value from 0 to 255 + * @param speed : Current device speed + * This parameter can be one of the these values: + * @arg USB_OTG_SPEED_FULL: Full speed mode + * @arg USB_OTG_SPEED_LOW: Low speed mode + * @param ep_type : Endpoint Type + * This parameter can be one of the these values: + * @arg EP_TYPE_CTRL: Control type + * @arg EP_TYPE_ISOC: Isochronous type + * @arg EP_TYPE_BULK: Bulk type + * @arg EP_TYPE_INTR: Interrupt type + * @param mps : Max Packet Size + * This parameter can be a value from 0 to32K + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, + uint8_t ch_num, + uint8_t epnum, + uint8_t dev_address, + uint8_t speed, + uint8_t ep_type, + uint16_t mps) +{ + /* Clear old interrupt conditions for this host channel. */ + USBx_HC(ch_num)->HCINT = 0xFFFFFFFF; + + /* Enable channel interrupts required for this transfer. */ + switch (ep_type) + { + case EP_TYPE_CTRL: + case EP_TYPE_BULK: + USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\ + USB_OTG_HCINTMSK_STALLM |\ + USB_OTG_HCINTMSK_TXERRM |\ + USB_OTG_HCINTMSK_DTERRM |\ + USB_OTG_HCINTMSK_AHBERR |\ + USB_OTG_HCINTMSK_NAKM ; + + if (epnum & 0x80) + { + USBx_HC(ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM; + } + break; + + case EP_TYPE_INTR: + USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\ + USB_OTG_HCINTMSK_STALLM |\ + USB_OTG_HCINTMSK_TXERRM |\ + USB_OTG_HCINTMSK_DTERRM |\ + USB_OTG_HCINTMSK_NAKM |\ + USB_OTG_HCINTMSK_AHBERR |\ + USB_OTG_HCINTMSK_FRMORM ; + + if (epnum & 0x80) + { + USBx_HC(ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM; + } + + break; + + case EP_TYPE_ISOC: + USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\ + USB_OTG_HCINTMSK_ACKM |\ + USB_OTG_HCINTMSK_AHBERR |\ + USB_OTG_HCINTMSK_FRMORM ; + + if (epnum & 0x80) + { + USBx_HC(ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_TXERRM | USB_OTG_HCINTMSK_BBERRM); + } + break; + } + + /* Enable the top level host channel interrupt. */ + USBx_HOST->HAINTMSK |= (1 << ch_num); + + /* Make sure host channel interrupts are enabled. */ + USBx->GINTMSK |= USB_OTG_GINTMSK_HCIM; + + /* Program the HCCHAR register */ + USBx_HC(ch_num)->HCCHAR = (((dev_address << 22) & USB_OTG_HCCHAR_DAD) |\ + (((epnum & 0x7F)<< 11) & USB_OTG_HCCHAR_EPNUM)|\ + ((((epnum & 0x80) == 0x80)<< 15) & USB_OTG_HCCHAR_EPDIR)|\ + (((speed == HPRT0_PRTSPD_LOW_SPEED)<< 17) & USB_OTG_HCCHAR_LSDEV)|\ + ((ep_type << 18) & USB_OTG_HCCHAR_EPTYP)|\ + (mps & USB_OTG_HCCHAR_MPSIZ)); + + if (ep_type == EP_TYPE_INTR) + { + USBx_HC(ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM ; + } + + return HAL_OK; +} + +/** + * @brief Start a transfer over a host channel + * @param USBx : Selected device + * @param hc : pointer to host channel structure + * @retval HAL state + */ +#if defined (__CC_ARM) /*!< ARM Compiler */ +#pragma O0 +#elif defined (__GNUC__) /*!< GNU Compiler */ +#pragma GCC optimize ("O0") +#endif /* __CC_ARM */ +HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc) +{ + uint8_t is_oddframe = 0; + uint16_t len_words = 0; + uint16_t num_packets = 0; + uint16_t max_hc_pkt_count = 256; + uint32_t tmpreg = 0; + + /* Compute the expected number of packets associated to the transfer */ + if (hc->xfer_len > 0) + { + num_packets = (hc->xfer_len + hc->max_packet - 1) / hc->max_packet; + + if (num_packets > max_hc_pkt_count) + { + num_packets = max_hc_pkt_count; + hc->xfer_len = num_packets * hc->max_packet; + } + } + else + { + num_packets = 1; + } + if (hc->ep_is_in) + { + hc->xfer_len = num_packets * hc->max_packet; + } + + /* Initialize the HCTSIZn register */ + USBx_HC(hc->ch_num)->HCTSIZ = (((hc->xfer_len) & USB_OTG_HCTSIZ_XFRSIZ)) |\ + ((num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) |\ + (((hc->data_pid) << 29) & USB_OTG_HCTSIZ_DPID); + + is_oddframe = (USBx_HOST->HFNUM & 0x01) ? 0 : 1; + USBx_HC(hc->ch_num)->HCCHAR &= ~USB_OTG_HCCHAR_ODDFRM; + USBx_HC(hc->ch_num)->HCCHAR |= (is_oddframe << 29); + + /* Set host channel enable */ + tmpreg = USBx_HC(hc->ch_num)->HCCHAR; + tmpreg &= ~USB_OTG_HCCHAR_CHDIS; + tmpreg |= USB_OTG_HCCHAR_CHENA; + USBx_HC(hc->ch_num)->HCCHAR = tmpreg; + + if((hc->ep_is_in == 0) && (hc->xfer_len > 0)) + { + switch(hc->ep_type) + { + /* Non periodic transfer */ + case EP_TYPE_CTRL: + case EP_TYPE_BULK: + len_words = (hc->xfer_len + 3) / 4; + + /* check if there is enough space in FIFO space */ + if(len_words > (USBx->HNPTXSTS & 0xFFFF)) + { + /* need to process data in nptxfempty interrupt */ + USBx->GINTMSK |= USB_OTG_GINTMSK_NPTXFEM; + } + break; + + /* Periodic transfer */ + case EP_TYPE_INTR: + case EP_TYPE_ISOC: + len_words = (hc->xfer_len + 3) / 4; + /* check if there is enough space in FIFO space */ + if(len_words > (USBx_HOST->HPTXSTS & 0xFFFF)) /* split the transfer */ + { + /* need to process data in ptxfempty interrupt */ + USBx->GINTMSK |= USB_OTG_GINTMSK_PTXFEM; + } + break; + + default: + break; + } + + /* Write packet into the Tx FIFO. */ + USB_WritePacket(USBx, hc->xfer_buff, hc->ch_num, hc->xfer_len); + } + + return HAL_OK; +} + +/** + * @brief Read all host channel interrupts status + * @param USBx : Selected device + * @retval HAL state + */ +uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx) +{ + return ((USBx_HOST->HAINT) & 0xFFFF); +} + +/** + * @brief Halt a host channel + * @param USBx : Selected device + * @param hc_num : Host Channel number + * This parameter can be a value from 1 to 15 + * @retval HAL state + */ +HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num) +{ + uint32_t count = 0; + + /* Check for space in the request queue to issue the halt. */ + if (((USBx_HC(hc_num)->HCCHAR) & (HCCHAR_CTRL << 18)) || ((USBx_HC(hc_num)->HCCHAR) & (HCCHAR_BULK << 18))) + { + USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHDIS; + + if ((USBx->HNPTXSTS & 0xFFFF) == 0) + { + USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; + USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR; + do + { + if (++count > 1000) + { + break; + } + } + while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); + } + else + { + USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + } + } + else + { + USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHDIS; + + if ((USBx_HOST->HPTXSTS & 0xFFFF) == 0) + { + USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; + USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR; + do + { + if (++count > 1000) + { + break; + } + } + while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); + } + else + { + USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA; + } + } + + return HAL_OK; +} + +/** + * @brief Initiate Do Ping protocol + * @param USBx : Selected device + * @param hc_num : Host Channel number + * This parameter can be a value from 1 to 15 + * @retval HAL state + */ +HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num) +{ + uint8_t num_packets = 1; + uint32_t tmpreg = 0; + + USBx_HC(ch_num)->HCTSIZ = ((num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) |\ + USB_OTG_HCTSIZ_DOPING; + + /* Set host channel enable */ + tmpreg = USBx_HC(ch_num)->HCCHAR; + tmpreg &= ~USB_OTG_HCCHAR_CHDIS; + tmpreg |= USB_OTG_HCCHAR_CHENA; + USBx_HC(ch_num)->HCCHAR = tmpreg; + + return HAL_OK; +} + +/** + * @brief Stop Host Core + * @param USBx : Selected device + * @retval HAL state + */ +HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx) +{ + uint8_t index; + uint32_t count = 0; + uint32_t value = 0; + + USB_DisableGlobalInt(USBx); + + /* Flush FIFO */ + USB_FlushTxFifo(USBx, 0x10); + USB_FlushRxFifo(USBx); + + /* Flush out any leftover queued requests. */ + for (index = 0; index <= 15; index++) + { + value = USBx_HC(index)->HCCHAR; + value |= USB_OTG_HCCHAR_CHDIS; + value &= ~USB_OTG_HCCHAR_CHENA; + value &= ~USB_OTG_HCCHAR_EPDIR; + USBx_HC(index)->HCCHAR = value; + } + + /* Halt all channels to put them into a known state. */ + for (index = 0; index <= 15; index++) + { + value = USBx_HC(index)->HCCHAR ; + value |= USB_OTG_HCCHAR_CHDIS; + value |= USB_OTG_HCCHAR_CHENA; + value &= ~USB_OTG_HCCHAR_EPDIR; + USBx_HC(index)->HCCHAR = value; + + do + { + if (++count > 1000) + { + break; + } + } + while ((USBx_HC(index)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA); + } + + /* Clear any pending Host interrupts */ + USBx_HOST->HAINT = 0xFFFFFFFF; + USBx->GINTSTS = 0xFFFFFFFF; + USB_EnableGlobalInt(USBx); + + return HAL_OK; +} + +/** + * @brief USB_ActivateRemoteWakeup : active remote wakeup signalling + * @param USBx : Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx) +{ + if((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS) + { + /* active Remote wakeup signalling */ + USBx_DEVICE->DCTL |= USB_OTG_DCTL_RWUSIG; + } + return HAL_OK; +} + +/** + * @brief USB_DeActivateRemoteWakeup : de-active remote wakeup signalling + * @param USBx : Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_OTG_GlobalTypeDef *USBx) +{ + /* active Remote wakeup signalling */ + USBx_DEVICE->DCTL &= ~(USB_OTG_DCTL_RWUSIG); + return HAL_OK; +} + +#endif /* USB_OTG_FS */ + +/*============================================================================== + USB Device FS peripheral available on STM32F102xx and STM32F103xx devices +==============================================================================*/ +#if defined (USB) +/** + * @brief Initializes the USB Core + * @param USBx: USB Instance + * @param cfg : pointer to a USB_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_CoreInit(USB_TypeDef *USBx, USB_CfgTypeDef cfg) +{ + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return HAL_OK; +} + +/** + * @brief USB_EnableGlobalInt + * Enables the controller's Global Int in the AHB Config reg + * @param USBx : Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_EnableGlobalInt(USB_TypeDef *USBx) +{ + uint32_t winterruptmask = 0; + + /* Set winterruptmask variable */ + winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_ERRM \ + | USB_CNTR_ESOFM | USB_CNTR_RESETM; + + /* Set interrupt mask */ + USBx->CNTR |= winterruptmask; + + return HAL_OK; +} + +/** + * @brief USB_DisableGlobalInt + * Disable the controller's Global Int in the AHB Config reg + * @param USBx : Selected device + * @retval HAL status +*/ +HAL_StatusTypeDef USB_DisableGlobalInt(USB_TypeDef *USBx) +{ + uint32_t winterruptmask = 0; + + /* Set winterruptmask variable */ + winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_ERRM \ + | USB_CNTR_ESOFM | USB_CNTR_RESETM; + + /* Clear interrupt mask */ + USBx->CNTR &= ~winterruptmask; + + return HAL_OK; +} + +/** + * @brief USB_SetCurrentMode : Set functional mode + * @param USBx : Selected device + * @param mode : current core mode + * This parameter can be one of the these values: + * @arg USB_DEVICE_MODE: Peripheral mode mode + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetCurrentMode(USB_TypeDef *USBx , USB_ModeTypeDef mode) +{ + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return HAL_OK; +} + +/** + * @brief USB_DevInit : Initializes the USB controller registers + * for device mode + * @param USBx : Selected device + * @param cfg : pointer to a USB_CfgTypeDef structure that contains + * the configuration information for the specified USBx peripheral. + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevInit (USB_TypeDef *USBx, USB_CfgTypeDef cfg) +{ + /* Init Device */ + /*CNTR_FRES = 1*/ + USBx->CNTR = USB_CNTR_FRES; + + /*CNTR_FRES = 0*/ + USBx->CNTR = 0; + + /*Clear pending interrupts*/ + USBx->ISTR = 0; + + /*Set Btable Address*/ + USBx->BTABLE = BTABLE_ADDRESS; + + return HAL_OK; +} + +/** + * @brief USB_FlushTxFifo : Flush a Tx FIFO + * @param USBx : Selected device + * @param num : FIFO number + * This parameter can be a value from 1 to 15 + 15 means Flush all Tx FIFOs + * @retval HAL status + */ +HAL_StatusTypeDef USB_FlushTxFifo (USB_TypeDef *USBx, uint32_t num ) +{ + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return HAL_OK; +} + +/** + * @brief USB_FlushRxFifo : Flush Rx FIFO + * @param USBx : Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_FlushRxFifo(USB_TypeDef *USBx) +{ + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return HAL_OK; +} + +/** + * @brief Activate and configure an endpoint + * @param USBx : Selected device + * @param ep: pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) +{ + /* initialize Endpoint */ + switch (ep->type) + { + case EP_TYPE_CTRL: + PCD_SET_EPTYPE(USBx, ep->num, USB_EP_CONTROL); + break; + case EP_TYPE_BULK: + PCD_SET_EPTYPE(USBx, ep->num, USB_EP_BULK); + break; + case EP_TYPE_INTR: + PCD_SET_EPTYPE(USBx, ep->num, USB_EP_INTERRUPT); + break; + case EP_TYPE_ISOC: + PCD_SET_EPTYPE(USBx, ep->num, USB_EP_ISOCHRONOUS); + break; + default: + break; + } + + PCD_SET_EP_ADDRESS(USBx, ep->num, ep->num); + + if (ep->doublebuffer == 0) + { + if (ep->is_in) + { + /*Set the endpoint Transmit buffer address */ + PCD_SET_EP_TX_ADDRESS(USBx, ep->num, ep->pmaadress); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + /* Configure NAK status for the Endpoint*/ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK); + } + else + { + /*Set the endpoint Receive buffer address */ + PCD_SET_EP_RX_ADDRESS(USBx, ep->num, ep->pmaadress); + /*Set the endpoint Receive buffer counter*/ + PCD_SET_EP_RX_CNT(USBx, ep->num, ep->maxpacket); + PCD_CLEAR_RX_DTOG(USBx, ep->num); + /* Configure VALID status for the Endpoint*/ + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + } + } + /*Double Buffer*/ + else + { + /*Set the endpoint as double buffered*/ + PCD_SET_EP_DBUF(USBx, ep->num); + /*Set buffer address for double buffered mode*/ + PCD_SET_EP_DBUF_ADDR(USBx, ep->num,ep->pmaaddr0, ep->pmaaddr1); + + if (ep->is_in==0) + { + /* Clear the data toggle bits for the endpoint IN/OUT*/ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + /* Reset value of the data toggle bits for the endpoint out*/ + PCD_TX_DTOG(USBx, ep->num); + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + else + { + /* Clear the data toggle bits for the endpoint IN/OUT*/ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + PCD_RX_DTOG(USBx, ep->num); + /* Configure DISABLE status for the Endpoint*/ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + } + } + + return HAL_OK; +} + +/** + * @brief De-activate and de-initialize an endpoint + * @param USBx : Selected device + * @param ep: pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeactivateEndpoint(USB_TypeDef *USBx, USB_EPTypeDef *ep) +{ + if (ep->doublebuffer == 0) + { + if (ep->is_in) + { + PCD_CLEAR_TX_DTOG(USBx, ep->num); + /* Configure DISABLE status for the Endpoint*/ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + else + { + PCD_CLEAR_RX_DTOG(USBx, ep->num); + /* Configure DISABLE status for the Endpoint*/ + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + } + } + /*Double Buffer*/ + else + { + if (ep->is_in==0) + { + /* Clear the data toggle bits for the endpoint IN/OUT*/ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + + /* Reset value of the data toggle bits for the endpoint out*/ + PCD_TX_DTOG(USBx, ep->num); + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + } + else + { + /* Clear the data toggle bits for the endpoint IN/OUT*/ + PCD_CLEAR_RX_DTOG(USBx, ep->num); + PCD_CLEAR_TX_DTOG(USBx, ep->num); + PCD_RX_DTOG(USBx, ep->num); + /* Configure DISABLE status for the Endpoint*/ + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS); + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS); + } + } + + return HAL_OK; +} + +/** + * @brief USB_EPStartXfer : setup and starts a transfer over an EP + * @param USBx : Selected device + * @param ep: pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPStartXfer(USB_TypeDef *USBx , USB_EPTypeDef *ep) +{ + uint16_t pmabuffer = 0; + uint32_t len = ep->xfer_len; + + /* IN endpoint */ + if (ep->is_in == 1) + { + /*Multi packet transfer*/ + if (ep->xfer_len > ep->maxpacket) + { + len=ep->maxpacket; + ep->xfer_len-=len; + } + else + { + len=ep->xfer_len; + ep->xfer_len =0; + } + + /* configure and validate Tx endpoint */ + if (ep->doublebuffer == 0) + { + USB_WritePMA(USBx, ep->xfer_buff, ep->pmaadress, len); + PCD_SET_EP_TX_CNT(USBx, ep->num, len); + } + else + { + /* Write the data to the USB endpoint */ + if (PCD_GET_ENDPOINT(USBx, ep->num)& USB_EP_DTOG_TX) + { + /* Set the Double buffer counter for pmabuffer1 */ + PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr1; + } + else + { + /* Set the Double buffer counter for pmabuffer0 */ + PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len); + pmabuffer = ep->pmaaddr0; + } + USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, len); + PCD_FreeUserBuffer(USBx, ep->num, ep->is_in); + } + + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_VALID); + } + else /* OUT endpoint */ + { + /* Multi packet transfer*/ + if (ep->xfer_len > ep->maxpacket) + { + len=ep->maxpacket; + ep->xfer_len-=len; + } + else + { + len=ep->xfer_len; + ep->xfer_len =0; + } + + /* configure and validate Rx endpoint */ + if (ep->doublebuffer == 0) + { + /*Set RX buffer count*/ + PCD_SET_EP_RX_CNT(USBx, ep->num, len); + } + else + { + /*Set the Double buffer counter*/ + PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, len); + } + + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + } + + return HAL_OK; +} + +/** + * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated + * with the EP/channel + * @param USBx : Selected device + * @param src : pointer to source buffer + * @param ch_ep_num : endpoint or host channel number + * @param len : Number of bytes to write + * @retval HAL status + */ +HAL_StatusTypeDef USB_WritePacket(USB_TypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len) +{ + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return HAL_OK; +} + +/** + * @brief USB_ReadPacket : read a packet from the Tx FIFO associated + * with the EP/channel + * @param USBx : Selected device + * @param dest : destination pointer + * @param len : Number of bytes to read + * @retval pointer to destination buffer + */ +void *USB_ReadPacket(USB_TypeDef *USBx, uint8_t *dest, uint16_t len) +{ + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return ((void *)NULL); +} + +/** + * @brief USB_EPSetStall : set a stall condition over an EP + * @param USBx : Selected device + * @param ep: pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPSetStall(USB_TypeDef *USBx , USB_EPTypeDef *ep) +{ + if (ep->num == 0) + { + /* This macro sets STALL status for RX & TX*/ + PCD_SET_EP_TXRX_STATUS(USBx, ep->num, USB_EP_RX_STALL, USB_EP_TX_STALL); + } + else + { + if (ep->is_in) + { + PCD_SET_EP_TX_STATUS(USBx, ep->num , USB_EP_TX_STALL); + } + else + { + PCD_SET_EP_RX_STATUS(USBx, ep->num , USB_EP_RX_STALL); + } + } + return HAL_OK; +} + +/** + * @brief USB_EPClearStall : Clear a stall condition over an EP + * @param USBx : Selected device + * @param ep: pointer to endpoint structure + * @retval HAL status + */ +HAL_StatusTypeDef USB_EPClearStall(USB_TypeDef *USBx, USB_EPTypeDef *ep) +{ + if (ep->is_in) + { + PCD_CLEAR_TX_DTOG(USBx, ep->num); + PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_VALID); + } + else + { + PCD_CLEAR_RX_DTOG(USBx, ep->num); + PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID); + } + return HAL_OK; +} + +/** + * @brief USB_StopDevice : Stop the usb device mode + * @param USBx : Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_StopDevice(USB_TypeDef *USBx) +{ + /* disable all interrupts and force USB reset */ + USBx->CNTR = USB_CNTR_FRES; + + /* clear interrupt status register */ + USBx->ISTR = 0; + + /* switch-off device */ + USBx->CNTR = (USB_CNTR_FRES | USB_CNTR_PDWN); + + return HAL_OK; +} + +/** + * @brief USB_SetDevAddress : Stop the usb device mode + * @param USBx : Selected device + * @param address : new device address to be assigned + * This parameter can be a value from 0 to 255 + * @retval HAL status + */ +HAL_StatusTypeDef USB_SetDevAddress (USB_TypeDef *USBx, uint8_t address) +{ + if(address == 0) + { + /* set device address and enable function */ + USBx->DADDR = USB_DADDR_EF; + } + + return HAL_OK; +} + +/** + * @brief USB_DevConnect : Connect the USB device by enabling the pull-up/pull-down + * @param USBx : Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevConnect (USB_TypeDef *USBx) +{ + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return HAL_OK; +} + +/** + * @brief USB_DevDisconnect : Disconnect the USB device by disabling the pull-up/pull-down + * @param USBx : Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DevDisconnect (USB_TypeDef *USBx) +{ + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return HAL_OK; +} + +/** + * @brief USB_ReadInterrupts: return the global USB interrupt status + * @param USBx : Selected device + * @retval HAL status + */ +uint32_t USB_ReadInterrupts (USB_TypeDef *USBx) +{ + uint32_t tmpreg = 0; + + tmpreg = USBx->ISTR; + return tmpreg; +} + +/** + * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status + * @param USBx : Selected device + * @retval HAL status + */ +uint32_t USB_ReadDevAllOutEpInterrupt (USB_TypeDef *USBx) +{ + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return (0); +} + +/** + * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status + * @param USBx : Selected device + * @retval HAL status + */ +uint32_t USB_ReadDevAllInEpInterrupt (USB_TypeDef *USBx) +{ + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return (0); +} + +/** + * @brief Returns Device OUT EP Interrupt register + * @param USBx : Selected device + * @param epnum : endpoint number + * This parameter can be a value from 0 to 15 + * @retval Device OUT EP Interrupt register + */ +uint32_t USB_ReadDevOutEPInterrupt (USB_TypeDef *USBx , uint8_t epnum) +{ + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return (0); +} + +/** + * @brief Returns Device IN EP Interrupt register + * @param USBx : Selected device + * @param epnum : endpoint number + * This parameter can be a value from 0 to 15 + * @retval Device IN EP Interrupt register + */ +uint32_t USB_ReadDevInEPInterrupt (USB_TypeDef *USBx , uint8_t epnum) +{ + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return (0); +} + +/** + * @brief USB_ClearInterrupts: clear a USB interrupt + * @param USBx : Selected device + * @param interrupt : interrupt flag + * @retval None + */ +void USB_ClearInterrupts (USB_TypeDef *USBx, uint32_t interrupt) +{ + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ +} + +/** + * @brief Prepare the EP0 to start the first control setup + * @param USBx : Selected device + * @param psetup : pointer to setup packet + * @retval HAL status + */ +HAL_StatusTypeDef USB_EP0_OutStart(USB_TypeDef *USBx, uint8_t *psetup) +{ + /* NOTE : - This function is not required by USB Device FS peripheral, it is used + only by USB OTG FS peripheral. + - This function is added to ensure compatibility across platforms. + */ + return HAL_OK; +} + +/** + * @brief USB_ActivateRemoteWakeup : active remote wakeup signalling + * @param USBx : Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_TypeDef *USBx) +{ + USBx->CNTR |= USB_CNTR_RESUME; + + return HAL_OK; +} + +/** + * @brief USB_DeActivateRemoteWakeup : de-active remote wakeup signalling + * @param USBx : Selected device + * @retval HAL status + */ +HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_TypeDef *USBx) +{ + USBx->CNTR &= ~(USB_CNTR_RESUME); + return HAL_OK; +} + +/** + * @brief Copy a buffer from user memory area to packet memory area (PMA) + * @param USBx : pointer to USB register. + * @param pbUsrBuf : pointer to user memory area. + * @param wPMABufAddr : address into PMA. + * @param wNBytes : number of bytes to be copied. + * @retval None + */ +void USB_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes) +{ + uint32_t nbytes = (wNBytes + 1) >> 1; /* nbytes = (wNBytes + 1) / 2 */ + uint32_t index = 0, temp1 = 0, temp2 = 0; + uint16_t *pdwVal = NULL; + + pdwVal = (uint16_t *)(wPMABufAddr * 2 + (uint32_t)USBx + 0x400); + for (index = nbytes; index != 0; index--) + { + temp1 = (uint16_t) * pbUsrBuf; + pbUsrBuf++; + temp2 = temp1 | (uint16_t) * pbUsrBuf << 8; + *pdwVal++ = temp2; + pdwVal++; + pbUsrBuf++; + } +} + +/** + * @brief Copy a buffer from user memory area to packet memory area (PMA) + * @param USBx : pointer to USB register. +* @param pbUsrBuf : pointer to user memory area. + * @param wPMABufAddr : address into PMA. + * @param wNBytes : number of bytes to be copied. + * @retval None + */ +void USB_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes) +{ + uint32_t nbytes = (wNBytes + 1) >> 1;/* /2*/ + uint32_t index = 0; + uint32_t *pdwVal = NULL; + + pdwVal = (uint32_t *)(wPMABufAddr * 2 + (uint32_t)USBx + 0x400); + for (index = nbytes; index != 0; index--) + { + *(uint16_t*)pbUsrBuf++ = *pdwVal++; + pbUsrBuf++; + } +} + +#endif /* USB */ + +/** + * @} + */ +/** + * @} + */ + +#if defined (USB_OTG_FS) +/** @addtogroup USB_LL_Private_Functions + * @{ + */ +/** + * @brief Reset the USB Core (needed after USB clock settings change) + * @param USBx : Selected device + * @retval HAL status + */ +static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx) +{ + uint32_t count = 0; + + /* Wait for AHB master IDLE state. */ + do + { + if (++count > 200000) + { + return HAL_TIMEOUT; + } + } + while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0); + + /* Core Soft Reset */ + count = 0; + USBx->GRSTCTL |= USB_OTG_GRSTCTL_CSRST; + + do + { + if (++count > 200000) + { + return HAL_TIMEOUT; + } + } + while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST); + + return HAL_OK; +} +/** + * @} + */ +#endif /* USB_OTG_FS */ + +#endif /* STM32F102x6 || STM32F102xB || */ + /* STM32F103x6 || STM32F103xB || */ + /* STM32F103xE || STM32F103xG || */ + /* STM32F105xC || STM32F107xC */ + +#endif /* defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Inc/main.h b/stm32cubemx/Inc/main.h index 6e20349..951e332 100644 --- a/stm32cubemx/Inc/main.h +++ b/stm32cubemx/Inc/main.h @@ -4,29 +4,39 @@ * Description : This file contains the common defines of the application ****************************************************************************** * - * COPYRIGHT(c) 2017 STMicroelectronics + * Copyright (c) 2017 STMicroelectronics International N.V. + * All rights reserved. * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ @@ -36,11 +46,12 @@ /* Includes ------------------------------------------------------------------*/ /* USER CODE BEGIN Includes */ - +#include "stm32f1xx_hal_dma.h" +#include "stm32f1xx_hal_tim.h" /* USER CODE END Includes */ /* Private define ------------------------------------------------------------*/ -#define RX_TIMER_PRESCALER 72000000 / 2000 +#define RX_TIMER_PRESCALER (72000000 / 2000) /* USER CODE BEGIN Private defines */ #ifdef __cplusplus @@ -51,6 +62,8 @@ void main_pre_init(); void main_post_init(); void main_loop(); +void it_tim1(TIM_HandleTypeDef *htim1); + #ifdef __cplusplus } #endif diff --git a/stm32cubemx/Inc/stm32f1xx_hal_conf.h b/stm32cubemx/Inc/stm32f1xx_hal_conf.h index 463c8ba..2364650 100644 --- a/stm32cubemx/Inc/stm32f1xx_hal_conf.h +++ b/stm32cubemx/Inc/stm32f1xx_hal_conf.h @@ -64,11 +64,11 @@ /*#define HAL_I2C_MODULE_ENABLED */ /*#define HAL_I2S_MODULE_ENABLED */ /*#define HAL_IRDA_MODULE_ENABLED */ -#define HAL_IWDG_MODULE_ENABLED +/*#define HAL_IWDG_MODULE_ENABLED */ /*#define HAL_NOR_MODULE_ENABLED */ /*#define HAL_NAND_MODULE_ENABLED */ /*#define HAL_PCCARD_MODULE_ENABLED */ -/*#define HAL_PCD_MODULE_ENABLED */ +#define HAL_PCD_MODULE_ENABLED /*#define HAL_HCD_MODULE_ENABLED */ /*#define HAL_PWR_MODULE_ENABLED */ /*#define HAL_RCC_MODULE_ENABLED */ diff --git a/stm32cubemx/Inc/stm32f1xx_it.h b/stm32cubemx/Inc/stm32f1xx_it.h index 73ada16..e0322ac 100644 --- a/stm32cubemx/Inc/stm32f1xx_it.h +++ b/stm32cubemx/Inc/stm32f1xx_it.h @@ -55,6 +55,8 @@ void DebugMon_Handler(void); void PendSV_Handler(void); void SysTick_Handler(void); void DMA1_Channel2_IRQHandler(void); +void USB_HP_CAN1_TX_IRQHandler(void); +void USB_LP_CAN1_RX0_IRQHandler(void); void TIM1_TRG_COM_IRQHandler(void); #ifdef __cplusplus diff --git a/stm32cubemx/Inc/usb_device.h b/stm32cubemx/Inc/usb_device.h new file mode 100644 index 0000000..0a6b011 --- /dev/null +++ b/stm32cubemx/Inc/usb_device.h @@ -0,0 +1,74 @@ +/** + ****************************************************************************** + * @file : USB_DEVICE + * @version : v2.0_Cube + * @brief : Header for usb_device file. + ****************************************************************************** + * + * Copyright (c) 2017 STMicroelectronics International N.V. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** +*/ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __usb_device_H +#define __usb_device_H +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx.h" +#include "stm32f1xx_hal.h" +#include "usbd_def.h" + +extern USBD_HandleTypeDef hUsbDeviceFS; + +/* USB_Device init function */ +void MX_USB_DEVICE_Init(void); + +#ifdef __cplusplus +} +#endif +#endif /*__usb_device_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Inc/usbd_cdc_if.h b/stm32cubemx/Inc/usbd_cdc_if.h new file mode 100644 index 0000000..46341fd --- /dev/null +++ b/stm32cubemx/Inc/usbd_cdc_if.h @@ -0,0 +1,132 @@ +/** + ****************************************************************************** + * @file : usbd_cdc_if.h + * @brief : Header for usbd_cdc_if file. + ****************************************************************************** + * + * Copyright (c) 2017 STMicroelectronics International N.V. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** +*/ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_CDC_IF_H +#define __USBD_CDC_IF_H + +#ifdef __cplusplus + extern "C" { +#endif +/* Includes ------------------------------------------------------------------*/ +#include "usbd_cdc.h" +/* USER CODE BEGIN INCLUDE */ +/* USER CODE END INCLUDE */ + +/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_CDC_IF + * @brief header + * @{ + */ + +/** @defgroup USBD_CDC_IF_Exported_Defines + * @{ + */ +/* USER CODE BEGIN EXPORTED_DEFINES */ +/* USER CODE END EXPORTED_DEFINES */ + +/** + * @} + */ + +/** @defgroup USBD_CDC_IF_Exported_Types + * @{ + */ +/* USER CODE BEGIN EXPORTED_TYPES */ +/* USER CODE END EXPORTED_TYPES */ + +/** + * @} + */ + +/** @defgroup USBD_CDC_IF_Exported_Macros + * @{ + */ +/* USER CODE BEGIN EXPORTED_MACRO */ +/* USER CODE END EXPORTED_MACRO */ + +/** + * @} + */ + +/** @defgroup USBD_AUDIO_IF_Exported_Variables + * @{ + */ +extern USBD_CDC_ItfTypeDef USBD_Interface_fops_FS; + +/* USER CODE BEGIN EXPORTED_VARIABLES */ +/* USER CODE END EXPORTED_VARIABLES */ + +/** + * @} + */ + +/** @defgroup USBD_CDC_IF_Exported_FunctionsPrototype + * @{ + */ +uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len); + +/* USER CODE BEGIN EXPORTED_FUNCTIONS */ +/* USER CODE END EXPORTED_FUNCTIONS */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_CDC_IF_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Inc/usbd_conf.h b/stm32cubemx/Inc/usbd_conf.h new file mode 100644 index 0000000..137f8d0 --- /dev/null +++ b/stm32cubemx/Inc/usbd_conf.h @@ -0,0 +1,186 @@ +/** + ****************************************************************************** + * @file : usbd_conf.h + * @version : v2.0_Cube + * @brief : Header for usbd_conf file. + ****************************************************************************** + * + * Copyright (c) 2017 STMicroelectronics International N.V. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** +*/ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_CONF__H__ +#define __USBD_CONF__H__ +#ifdef __cplusplus + extern "C" { +#endif +/* Includes ------------------------------------------------------------------*/ +#include +#include +#include +#include "stm32f1xx.h" +#include "stm32f1xx_hal.h" +#include "usbd_def.h" + +/** @addtogroup USBD_OTG_DRIVER + * @{ + */ + +/** @defgroup USBD_CONF + * @brief usb otg low level driver configuration file + * @{ + */ + +/** @defgroup USBD_CONF_Exported_Defines + * @{ + */ + +/*---------- -----------*/ +#define USBD_MAX_NUM_INTERFACES 1 +/*---------- -----------*/ +#define USBD_MAX_NUM_CONFIGURATION 1 +/*---------- -----------*/ +#define USBD_MAX_STR_DESC_SIZ 512 +/*---------- -----------*/ +#define USBD_SUPPORT_USER_STRING 0 +/*---------- -----------*/ +#define USBD_DEBUG_LEVEL 0 +/*---------- -----------*/ +#define USBD_SELF_POWERED 1 +/*---------- -----------*/ +#define USBD_CDC_INTERVAL 1000 +/*---------- -----------*/ +#define MAX_STATIC_ALLOC_SIZE 512 +/****************************************/ +/* #define for FS and HS identification */ +#define DEVICE_FS 0 + +/** @defgroup USBD_Exported_Macros + * @{ + */ + +/* Memory management macros */ +#define USBD_malloc (uint32_t *)USBD_static_malloc +#define USBD_free USBD_static_free +#define USBD_memset /* Not used */ +#define USBD_memcpy /* Not used */ + +#define USBD_Delay HAL_Delay + +/* For footprint reasons and since only one allocation is handled in the HID class + driver, the malloc/free is changed into a static allocation method */ +void *USBD_static_malloc(uint32_t size); +void USBD_static_free(void *p); + +/* DEBUG macros */ +#if (USBD_DEBUG_LEVEL > 0) +#define USBD_UsrLog(...) printf(__VA_ARGS__);\ + printf("\n"); +#else +#define USBD_UsrLog(...) +#endif + + +#if (USBD_DEBUG_LEVEL > 1) + +#define USBD_ErrLog(...) printf("ERROR: ") ;\ + printf(__VA_ARGS__);\ + printf("\n"); +#else +#define USBD_ErrLog(...) +#endif + + +#if (USBD_DEBUG_LEVEL > 2) +#define USBD_DbgLog(...) printf("DEBUG : ") ;\ + printf(__VA_ARGS__);\ + printf("\n"); +#else +#define USBD_DbgLog(...) +#endif + +/** + * @} + */ + + + +/** + * @} + */ + +/** @defgroup USBD_CONF_Exported_Types + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_CONF_Exported_Macros + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_CONF_Exported_Variables + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_CONF_Exported_FunctionsPrototype + * @{ + */ +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif /*__USBD_CONF__H__*/ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/stm32cubemx/Inc/usbd_desc.h b/stm32cubemx/Inc/usbd_desc.h new file mode 100644 index 0000000..7ba669c --- /dev/null +++ b/stm32cubemx/Inc/usbd_desc.h @@ -0,0 +1,114 @@ +/** + ****************************************************************************** + * @file : usbd_desc.h + * @version : v2.0_Cube + * @brief : Header for usbd_desc file. + ****************************************************************************** + * + * Copyright (c) 2017 STMicroelectronics International N.V. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** +*/ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_DESC__H__ +#define __USBD_DESC__H__ + +#ifdef __cplusplus + extern "C" { +#endif +/* Includes ------------------------------------------------------------------*/ +#include "usbd_def.h" + +/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USB_DESC + * @brief general defines for the usb device library file + * @{ + */ + +/** @defgroup USB_DESC_Exported_Defines + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_DESC_Exported_TypesDefinitions + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_DESC_Exported_Macros + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_DESC_Exported_Variables + * @{ + */ +extern USBD_DescriptorsTypeDef FS_Desc; +/** + * @} + */ + +/** @defgroup USBD_DESC_Exported_FunctionsPrototype + * @{ + */ + +/** + * @} + */ +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_DESC_H */ + +/** + * @} + */ + +/** +* @} +*/ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h b/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h new file mode 100644 index 0000000..d937b2e --- /dev/null +++ b/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Inc/usbd_cdc.h @@ -0,0 +1,179 @@ +/** + ****************************************************************************** + * @file usbd_cdc.h + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief header file for the usbd_cdc.c file. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_CDC_H +#define __USB_CDC_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_ioreq.h" + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup usbd_cdc + * @brief This file is the Header file for usbd_cdc.c + * @{ + */ + + +/** @defgroup usbd_cdc_Exported_Defines + * @{ + */ +#define CDC_IN_EP 0x81 /* EP1 for data IN */ +#define CDC_OUT_EP 0x01 /* EP1 for data OUT */ +#define CDC_CMD_EP 0x82 /* EP2 for CDC commands */ + +/* CDC Endpoints parameters: you can fine tune these values depending on the needed baudrates and performance. */ +#define CDC_DATA_HS_MAX_PACKET_SIZE 512 /* Endpoint IN & OUT Packet size */ +#define CDC_DATA_FS_MAX_PACKET_SIZE 64 /* Endpoint IN & OUT Packet size */ +#define CDC_CMD_PACKET_SIZE 8 /* Control Endpoint Packet size */ + +#define USB_CDC_CONFIG_DESC_SIZ 67 +#define CDC_DATA_HS_IN_PACKET_SIZE CDC_DATA_HS_MAX_PACKET_SIZE +#define CDC_DATA_HS_OUT_PACKET_SIZE CDC_DATA_HS_MAX_PACKET_SIZE + +#define CDC_DATA_FS_IN_PACKET_SIZE CDC_DATA_FS_MAX_PACKET_SIZE +#define CDC_DATA_FS_OUT_PACKET_SIZE CDC_DATA_FS_MAX_PACKET_SIZE + +/*---------------------------------------------------------------------*/ +/* CDC definitions */ +/*---------------------------------------------------------------------*/ +#define CDC_SEND_ENCAPSULATED_COMMAND 0x00 +#define CDC_GET_ENCAPSULATED_RESPONSE 0x01 +#define CDC_SET_COMM_FEATURE 0x02 +#define CDC_GET_COMM_FEATURE 0x03 +#define CDC_CLEAR_COMM_FEATURE 0x04 +#define CDC_SET_LINE_CODING 0x20 +#define CDC_GET_LINE_CODING 0x21 +#define CDC_SET_CONTROL_LINE_STATE 0x22 +#define CDC_SEND_BREAK 0x23 + +/** + * @} + */ + + +/** @defgroup USBD_CORE_Exported_TypesDefinitions + * @{ + */ + +/** + * @} + */ +typedef struct +{ + uint32_t bitrate; + uint8_t format; + uint8_t paritytype; + uint8_t datatype; +}USBD_CDC_LineCodingTypeDef; + +typedef struct _USBD_CDC_Itf +{ + int8_t (* Init) (void); + int8_t (* DeInit) (void); + int8_t (* Control) (uint8_t, uint8_t * , uint16_t); + int8_t (* Receive) (uint8_t *, uint32_t *); + +}USBD_CDC_ItfTypeDef; + + +typedef struct +{ + uint32_t data[CDC_DATA_HS_MAX_PACKET_SIZE/4]; /* Force 32bits alignment */ + uint8_t CmdOpCode; + uint8_t CmdLength; + uint8_t *RxBuffer; + uint8_t *TxBuffer; + uint32_t RxLength; + uint32_t TxLength; + + __IO uint32_t TxState; + __IO uint32_t RxState; +} +USBD_CDC_HandleTypeDef; + + + +/** @defgroup USBD_CORE_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_CORE_Exported_Variables + * @{ + */ + +extern USBD_ClassTypeDef USBD_CDC; +#define USBD_CDC_CLASS &USBD_CDC +/** + * @} + */ + +/** @defgroup USB_CORE_Exported_Functions + * @{ + */ +uint8_t USBD_CDC_RegisterInterface (USBD_HandleTypeDef *pdev, + USBD_CDC_ItfTypeDef *fops); + +uint8_t USBD_CDC_SetTxBuffer (USBD_HandleTypeDef *pdev, + uint8_t *pbuff, + uint16_t length); + +uint8_t USBD_CDC_SetRxBuffer (USBD_HandleTypeDef *pdev, + uint8_t *pbuff); + +uint8_t USBD_CDC_ReceivePacket (USBD_HandleTypeDef *pdev); + +uint8_t USBD_CDC_TransmitPacket (USBD_HandleTypeDef *pdev); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USB_CDC_H */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c b/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c new file mode 100644 index 0000000..b2ca5f1 --- /dev/null +++ b/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Class/CDC/Src/usbd_cdc.c @@ -0,0 +1,925 @@ +/** + ****************************************************************************** + * @file usbd_cdc.c + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief This file provides the high layer firmware functions to manage the + * following functionalities of the USB CDC Class: + * - Initialization and Configuration of high and low layer + * - Enumeration as CDC Device (and enumeration for each implemented memory interface) + * - OUT/IN data transfer + * - Command IN transfer (class requests management) + * - Error management + * + * @verbatim + * + * =================================================================== + * CDC Class Driver Description + * =================================================================== + * This driver manages the "Universal Serial Bus Class Definitions for Communications Devices + * Revision 1.2 November 16, 2007" and the sub-protocol specification of "Universal Serial Bus + * Communications Class Subclass Specification for PSTN Devices Revision 1.2 February 9, 2007" + * This driver implements the following aspects of the specification: + * - Device descriptor management + * - Configuration descriptor management + * - Enumeration as CDC device with 2 data endpoints (IN and OUT) and 1 command endpoint (IN) + * - Requests management (as described in section 6.2 in specification) + * - Abstract Control Model compliant + * - Union Functional collection (using 1 IN endpoint for control) + * - Data interface class + * + * These aspects may be enriched or modified for a specific user application. + * + * This driver doesn't implement the following aspects of the specification + * (but it is possible to manage these features with some modifications on this driver): + * - Any class-specific aspect relative to communication classes should be managed by user application. + * - All communication classes other than PSTN are not managed + * + * @endverbatim + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_cdc.h" +#include "usbd_desc.h" +#include "usbd_ctlreq.h" + + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + + +/** @defgroup USBD_CDC + * @brief usbd core module + * @{ + */ + +/** @defgroup USBD_CDC_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_CDC_Private_Defines + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_CDC_Private_Macros + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_CDC_Private_FunctionPrototypes + * @{ + */ + + +static uint8_t USBD_CDC_Init (USBD_HandleTypeDef *pdev, + uint8_t cfgidx); + +static uint8_t USBD_CDC_DeInit (USBD_HandleTypeDef *pdev, + uint8_t cfgidx); + +static uint8_t USBD_CDC_Setup (USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req); + +static uint8_t USBD_CDC_DataIn (USBD_HandleTypeDef *pdev, + uint8_t epnum); + +static uint8_t USBD_CDC_DataOut (USBD_HandleTypeDef *pdev, + uint8_t epnum); + +static uint8_t USBD_CDC_EP0_RxReady (USBD_HandleTypeDef *pdev); + +static uint8_t *USBD_CDC_GetFSCfgDesc (uint16_t *length); + +static uint8_t *USBD_CDC_GetHSCfgDesc (uint16_t *length); + +static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length); + +static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length); + +uint8_t *USBD_CDC_GetDeviceQualifierDescriptor (uint16_t *length); + +/* USB Standard Device Descriptor */ +__ALIGN_BEGIN static uint8_t USBD_CDC_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END = +{ + USB_LEN_DEV_QUALIFIER_DESC, + USB_DESC_TYPE_DEVICE_QUALIFIER, + 0x00, + 0x02, + 0x00, + 0x00, + 0x00, + 0x40, + 0x01, + 0x00, +}; + +/** + * @} + */ + +/** @defgroup USBD_CDC_Private_Variables + * @{ + */ + + +/* CDC interface class callbacks structure */ +USBD_ClassTypeDef USBD_CDC = +{ + USBD_CDC_Init, + USBD_CDC_DeInit, + USBD_CDC_Setup, + NULL, /* EP0_TxSent, */ + USBD_CDC_EP0_RxReady, + USBD_CDC_DataIn, + USBD_CDC_DataOut, + NULL, + NULL, + NULL, + USBD_CDC_GetHSCfgDesc, + USBD_CDC_GetFSCfgDesc, + USBD_CDC_GetOtherSpeedCfgDesc, + USBD_CDC_GetDeviceQualifierDescriptor, +}; + +/* USB CDC device Configuration Descriptor */ +__ALIGN_BEGIN uint8_t USBD_CDC_CfgHSDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END = +{ + /*Configuration Descriptor*/ + 0x09, /* bLength: Configuration Descriptor size */ + USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */ + USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength:no of returned bytes */ + 0x00, + 0x02, /* bNumInterfaces: 2 interface */ + 0x01, /* bConfigurationValue: Configuration value */ + 0x00, /* iConfiguration: Index of string descriptor describing the configuration */ + 0xC0, /* bmAttributes: self powered */ + 0x32, /* MaxPower 0 mA */ + + /*---------------------------------------------------------------------------*/ + + /*Interface Descriptor */ + 0x09, /* bLength: Interface Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */ + /* Interface descriptor type */ + 0x00, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x01, /* bNumEndpoints: One endpoints used */ + 0x02, /* bInterfaceClass: Communication Interface Class */ + 0x02, /* bInterfaceSubClass: Abstract Control Model */ + 0x01, /* bInterfaceProtocol: Common AT commands */ + 0x00, /* iInterface: */ + + /*Header Functional Descriptor*/ + 0x05, /* bLength: Endpoint Descriptor size */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x00, /* bDescriptorSubtype: Header Func Desc */ + 0x10, /* bcdCDC: spec release number */ + 0x01, + + /*Call Management Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x01, /* bDescriptorSubtype: Call Management Func Desc */ + 0x00, /* bmCapabilities: D0+D1 */ + 0x01, /* bDataInterface: 1 */ + + /*ACM Functional Descriptor*/ + 0x04, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x02, /* bDescriptorSubtype: Abstract Control Management desc */ + 0x02, /* bmCapabilities */ + + /*Union Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x06, /* bDescriptorSubtype: Union func desc */ + 0x00, /* bMasterInterface: Communication class interface */ + 0x01, /* bSlaveInterface0: Data Class Interface */ + + /*Endpoint 2 Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_CMD_EP, /* bEndpointAddress */ + 0x03, /* bmAttributes: Interrupt */ + LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_CMD_PACKET_SIZE), + 0x10, /* bInterval: */ + /*---------------------------------------------------------------------------*/ + + /*Data class interface descriptor*/ + 0x09, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */ + 0x01, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x02, /* bNumEndpoints: Two endpoints used */ + 0x0A, /* bInterfaceClass: CDC */ + 0x00, /* bInterfaceSubClass: */ + 0x00, /* bInterfaceProtocol: */ + 0x00, /* iInterface: */ + + /*Endpoint OUT Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_OUT_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + LOBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), + 0x00, /* bInterval: ignore for Bulk transfer */ + + /*Endpoint IN Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_IN_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + LOBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_DATA_HS_MAX_PACKET_SIZE), + 0x00 /* bInterval: ignore for Bulk transfer */ +} ; + + +/* USB CDC device Configuration Descriptor */ +__ALIGN_BEGIN uint8_t USBD_CDC_CfgFSDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END = +{ + /*Configuration Descriptor*/ + 0x09, /* bLength: Configuration Descriptor size */ + USB_DESC_TYPE_CONFIGURATION, /* bDescriptorType: Configuration */ + USB_CDC_CONFIG_DESC_SIZ, /* wTotalLength:no of returned bytes */ + 0x00, + 0x02, /* bNumInterfaces: 2 interface */ + 0x01, /* bConfigurationValue: Configuration value */ + 0x00, /* iConfiguration: Index of string descriptor describing the configuration */ + 0xC0, /* bmAttributes: self powered */ + 0x32, /* MaxPower 0 mA */ + + /*---------------------------------------------------------------------------*/ + + /*Interface Descriptor */ + 0x09, /* bLength: Interface Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */ + /* Interface descriptor type */ + 0x00, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x01, /* bNumEndpoints: One endpoints used */ + 0x02, /* bInterfaceClass: Communication Interface Class */ + 0x02, /* bInterfaceSubClass: Abstract Control Model */ + 0x01, /* bInterfaceProtocol: Common AT commands */ + 0x00, /* iInterface: */ + + /*Header Functional Descriptor*/ + 0x05, /* bLength: Endpoint Descriptor size */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x00, /* bDescriptorSubtype: Header Func Desc */ + 0x10, /* bcdCDC: spec release number */ + 0x01, + + /*Call Management Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x01, /* bDescriptorSubtype: Call Management Func Desc */ + 0x00, /* bmCapabilities: D0+D1 */ + 0x01, /* bDataInterface: 1 */ + + /*ACM Functional Descriptor*/ + 0x04, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x02, /* bDescriptorSubtype: Abstract Control Management desc */ + 0x02, /* bmCapabilities */ + + /*Union Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x06, /* bDescriptorSubtype: Union func desc */ + 0x00, /* bMasterInterface: Communication class interface */ + 0x01, /* bSlaveInterface0: Data Class Interface */ + + /*Endpoint 2 Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_CMD_EP, /* bEndpointAddress */ + 0x03, /* bmAttributes: Interrupt */ + LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_CMD_PACKET_SIZE), + 0x10, /* bInterval: */ + /*---------------------------------------------------------------------------*/ + + /*Data class interface descriptor*/ + 0x09, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */ + 0x01, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x02, /* bNumEndpoints: Two endpoints used */ + 0x0A, /* bInterfaceClass: CDC */ + 0x00, /* bInterfaceSubClass: */ + 0x00, /* bInterfaceProtocol: */ + 0x00, /* iInterface: */ + + /*Endpoint OUT Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_OUT_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), + 0x00, /* bInterval: ignore for Bulk transfer */ + + /*Endpoint IN Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_IN_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + LOBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_DATA_FS_MAX_PACKET_SIZE), + 0x00 /* bInterval: ignore for Bulk transfer */ +} ; + +__ALIGN_BEGIN uint8_t USBD_CDC_OtherSpeedCfgDesc[USB_CDC_CONFIG_DESC_SIZ] __ALIGN_END = +{ + 0x09, /* bLength: Configuation Descriptor size */ + USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION, + USB_CDC_CONFIG_DESC_SIZ, + 0x00, + 0x02, /* bNumInterfaces: 2 interfaces */ + 0x01, /* bConfigurationValue: */ + 0x04, /* iConfiguration: */ + 0xC0, /* bmAttributes: */ + 0x32, /* MaxPower 100 mA */ + + /*Interface Descriptor */ + 0x09, /* bLength: Interface Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: Interface */ + /* Interface descriptor type */ + 0x00, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x01, /* bNumEndpoints: One endpoints used */ + 0x02, /* bInterfaceClass: Communication Interface Class */ + 0x02, /* bInterfaceSubClass: Abstract Control Model */ + 0x01, /* bInterfaceProtocol: Common AT commands */ + 0x00, /* iInterface: */ + + /*Header Functional Descriptor*/ + 0x05, /* bLength: Endpoint Descriptor size */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x00, /* bDescriptorSubtype: Header Func Desc */ + 0x10, /* bcdCDC: spec release number */ + 0x01, + + /*Call Management Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x01, /* bDescriptorSubtype: Call Management Func Desc */ + 0x00, /* bmCapabilities: D0+D1 */ + 0x01, /* bDataInterface: 1 */ + + /*ACM Functional Descriptor*/ + 0x04, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x02, /* bDescriptorSubtype: Abstract Control Management desc */ + 0x02, /* bmCapabilities */ + + /*Union Functional Descriptor*/ + 0x05, /* bFunctionLength */ + 0x24, /* bDescriptorType: CS_INTERFACE */ + 0x06, /* bDescriptorSubtype: Union func desc */ + 0x00, /* bMasterInterface: Communication class interface */ + 0x01, /* bSlaveInterface0: Data Class Interface */ + + /*Endpoint 2 Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT , /* bDescriptorType: Endpoint */ + CDC_CMD_EP, /* bEndpointAddress */ + 0x03, /* bmAttributes: Interrupt */ + LOBYTE(CDC_CMD_PACKET_SIZE), /* wMaxPacketSize: */ + HIBYTE(CDC_CMD_PACKET_SIZE), + 0xFF, /* bInterval: */ + + /*---------------------------------------------------------------------------*/ + + /*Data class interface descriptor*/ + 0x09, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_INTERFACE, /* bDescriptorType: */ + 0x01, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x02, /* bNumEndpoints: Two endpoints used */ + 0x0A, /* bInterfaceClass: CDC */ + 0x00, /* bInterfaceSubClass: */ + 0x00, /* bInterfaceProtocol: */ + 0x00, /* iInterface: */ + + /*Endpoint OUT Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_OUT_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + 0x40, /* wMaxPacketSize: */ + 0x00, + 0x00, /* bInterval: ignore for Bulk transfer */ + + /*Endpoint IN Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + USB_DESC_TYPE_ENDPOINT, /* bDescriptorType: Endpoint */ + CDC_IN_EP, /* bEndpointAddress */ + 0x02, /* bmAttributes: Bulk */ + 0x40, /* wMaxPacketSize: */ + 0x00, + 0x00 /* bInterval */ +}; + +/** + * @} + */ + +/** @defgroup USBD_CDC_Private_Functions + * @{ + */ + +/** + * @brief USBD_CDC_Init + * Initialize the CDC interface + * @param pdev: device instance + * @param cfgidx: Configuration index + * @retval status + */ +static uint8_t USBD_CDC_Init (USBD_HandleTypeDef *pdev, + uint8_t cfgidx) +{ + uint8_t ret = 0; + USBD_CDC_HandleTypeDef *hcdc; + + if(pdev->dev_speed == USBD_SPEED_HIGH ) + { + /* Open EP IN */ + USBD_LL_OpenEP(pdev, + CDC_IN_EP, + USBD_EP_TYPE_BULK, + CDC_DATA_HS_IN_PACKET_SIZE); + + /* Open EP OUT */ + USBD_LL_OpenEP(pdev, + CDC_OUT_EP, + USBD_EP_TYPE_BULK, + CDC_DATA_HS_OUT_PACKET_SIZE); + + } + else + { + /* Open EP IN */ + USBD_LL_OpenEP(pdev, + CDC_IN_EP, + USBD_EP_TYPE_BULK, + CDC_DATA_FS_IN_PACKET_SIZE); + + /* Open EP OUT */ + USBD_LL_OpenEP(pdev, + CDC_OUT_EP, + USBD_EP_TYPE_BULK, + CDC_DATA_FS_OUT_PACKET_SIZE); + } + /* Open Command IN EP */ + USBD_LL_OpenEP(pdev, + CDC_CMD_EP, + USBD_EP_TYPE_INTR, + CDC_CMD_PACKET_SIZE); + + + pdev->pClassData = USBD_malloc(sizeof (USBD_CDC_HandleTypeDef)); + + if(pdev->pClassData == NULL) + { + ret = 1; + } + else + { + hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + /* Init physical Interface components */ + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Init(); + + /* Init Xfer states */ + hcdc->TxState =0; + hcdc->RxState =0; + + if(pdev->dev_speed == USBD_SPEED_HIGH ) + { + /* Prepare Out endpoint to receive next packet */ + USBD_LL_PrepareReceive(pdev, + CDC_OUT_EP, + hcdc->RxBuffer, + CDC_DATA_HS_OUT_PACKET_SIZE); + } + else + { + /* Prepare Out endpoint to receive next packet */ + USBD_LL_PrepareReceive(pdev, + CDC_OUT_EP, + hcdc->RxBuffer, + CDC_DATA_FS_OUT_PACKET_SIZE); + } + + + } + return ret; +} + +/** + * @brief USBD_CDC_Init + * DeInitialize the CDC layer + * @param pdev: device instance + * @param cfgidx: Configuration index + * @retval status + */ +static uint8_t USBD_CDC_DeInit (USBD_HandleTypeDef *pdev, + uint8_t cfgidx) +{ + uint8_t ret = 0; + + /* Open EP IN */ + USBD_LL_CloseEP(pdev, + CDC_IN_EP); + + /* Open EP OUT */ + USBD_LL_CloseEP(pdev, + CDC_OUT_EP); + + /* Open Command IN EP */ + USBD_LL_CloseEP(pdev, + CDC_CMD_EP); + + + /* DeInit physical Interface components */ + if(pdev->pClassData != NULL) + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->DeInit(); + USBD_free(pdev->pClassData); + pdev->pClassData = NULL; + } + + return ret; +} + +/** + * @brief USBD_CDC_Setup + * Handle the CDC specific requests + * @param pdev: instance + * @param req: usb requests + * @retval status + */ +static uint8_t USBD_CDC_Setup (USBD_HandleTypeDef *pdev, + USBD_SetupReqTypedef *req) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + static uint8_t ifalt = 0; + + switch (req->bmRequest & USB_REQ_TYPE_MASK) + { + case USB_REQ_TYPE_CLASS : + if (req->wLength) + { + if (req->bmRequest & 0x80) + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest, + (uint8_t *)hcdc->data, + req->wLength); + USBD_CtlSendData (pdev, + (uint8_t *)hcdc->data, + req->wLength); + } + else + { + hcdc->CmdOpCode = req->bRequest; + hcdc->CmdLength = req->wLength; + + USBD_CtlPrepareRx (pdev, + (uint8_t *)hcdc->data, + req->wLength); + } + + } + else + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(req->bRequest, + (uint8_t*)req, + 0); + } + break; + + case USB_REQ_TYPE_STANDARD: + switch (req->bRequest) + { + case USB_REQ_GET_INTERFACE : + USBD_CtlSendData (pdev, + &ifalt, + 1); + break; + + case USB_REQ_SET_INTERFACE : + break; + } + + default: + break; + } + return USBD_OK; +} + +/** + * @brief USBD_CDC_DataIn + * Data sent on non-control IN endpoint + * @param pdev: device instance + * @param epnum: endpoint number + * @retval status + */ +static uint8_t USBD_CDC_DataIn (USBD_HandleTypeDef *pdev, uint8_t epnum) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + if(pdev->pClassData != NULL) + { + + hcdc->TxState = 0; + + return USBD_OK; + } + else + { + return USBD_FAIL; + } +} + +/** + * @brief USBD_CDC_DataOut + * Data received on non-control Out endpoint + * @param pdev: device instance + * @param epnum: endpoint number + * @retval status + */ +static uint8_t USBD_CDC_DataOut (USBD_HandleTypeDef *pdev, uint8_t epnum) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + /* Get the received data length */ + hcdc->RxLength = USBD_LL_GetRxDataSize (pdev, epnum); + + /* USB data will be immediately processed, this allow next USB traffic being + NAKed till the end of the application Xfer */ + if(pdev->pClassData != NULL) + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Receive(hcdc->RxBuffer, &hcdc->RxLength); + + return USBD_OK; + } + else + { + return USBD_FAIL; + } +} + + + +/** + * @brief USBD_CDC_DataOut + * Data received on non-control Out endpoint + * @param pdev: device instance + * @param epnum: endpoint number + * @retval status + */ +static uint8_t USBD_CDC_EP0_RxReady (USBD_HandleTypeDef *pdev) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + if((pdev->pUserData != NULL) && (hcdc->CmdOpCode != 0xFF)) + { + ((USBD_CDC_ItfTypeDef *)pdev->pUserData)->Control(hcdc->CmdOpCode, + (uint8_t *)hcdc->data, + hcdc->CmdLength); + hcdc->CmdOpCode = 0xFF; + + } + return USBD_OK; +} + +/** + * @brief USBD_CDC_GetFSCfgDesc + * Return configuration descriptor + * @param speed : current device speed + * @param length : pointer data length + * @retval pointer to descriptor buffer + */ +static uint8_t *USBD_CDC_GetFSCfgDesc (uint16_t *length) +{ + *length = sizeof (USBD_CDC_CfgFSDesc); + return USBD_CDC_CfgFSDesc; +} + +/** + * @brief USBD_CDC_GetHSCfgDesc + * Return configuration descriptor + * @param speed : current device speed + * @param length : pointer data length + * @retval pointer to descriptor buffer + */ +static uint8_t *USBD_CDC_GetHSCfgDesc (uint16_t *length) +{ + *length = sizeof (USBD_CDC_CfgHSDesc); + return USBD_CDC_CfgHSDesc; +} + +/** + * @brief USBD_CDC_GetCfgDesc + * Return configuration descriptor + * @param speed : current device speed + * @param length : pointer data length + * @retval pointer to descriptor buffer + */ +static uint8_t *USBD_CDC_GetOtherSpeedCfgDesc (uint16_t *length) +{ + *length = sizeof (USBD_CDC_OtherSpeedCfgDesc); + return USBD_CDC_OtherSpeedCfgDesc; +} + +/** +* @brief DeviceQualifierDescriptor +* return Device Qualifier descriptor +* @param length : pointer data length +* @retval pointer to descriptor buffer +*/ +uint8_t *USBD_CDC_GetDeviceQualifierDescriptor (uint16_t *length) +{ + *length = sizeof (USBD_CDC_DeviceQualifierDesc); + return USBD_CDC_DeviceQualifierDesc; +} + +/** +* @brief USBD_CDC_RegisterInterface + * @param pdev: device instance + * @param fops: CD Interface callback + * @retval status + */ +uint8_t USBD_CDC_RegisterInterface (USBD_HandleTypeDef *pdev, + USBD_CDC_ItfTypeDef *fops) +{ + uint8_t ret = USBD_FAIL; + + if(fops != NULL) + { + pdev->pUserData= fops; + ret = USBD_OK; + } + + return ret; +} + +/** + * @brief USBD_CDC_SetTxBuffer + * @param pdev: device instance + * @param pbuff: Tx Buffer + * @retval status + */ +uint8_t USBD_CDC_SetTxBuffer (USBD_HandleTypeDef *pdev, + uint8_t *pbuff, + uint16_t length) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + hcdc->TxBuffer = pbuff; + hcdc->TxLength = length; + + return USBD_OK; +} + + +/** + * @brief USBD_CDC_SetRxBuffer + * @param pdev: device instance + * @param pbuff: Rx Buffer + * @retval status + */ +uint8_t USBD_CDC_SetRxBuffer (USBD_HandleTypeDef *pdev, + uint8_t *pbuff) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + hcdc->RxBuffer = pbuff; + + return USBD_OK; +} + +/** + * @brief USBD_CDC_DataOut + * Data received on non-control Out endpoint + * @param pdev: device instance + * @param epnum: endpoint number + * @retval status + */ +uint8_t USBD_CDC_TransmitPacket(USBD_HandleTypeDef *pdev) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + if(pdev->pClassData != NULL) + { + if(hcdc->TxState == 0) + { + /* Tx Transfer in progress */ + hcdc->TxState = 1; + + /* Transmit next packet */ + USBD_LL_Transmit(pdev, + CDC_IN_EP, + hcdc->TxBuffer, + hcdc->TxLength); + + return USBD_OK; + } + else + { + return USBD_BUSY; + } + } + else + { + return USBD_FAIL; + } +} + + +/** + * @brief USBD_CDC_ReceivePacket + * prepare OUT Endpoint for reception + * @param pdev: device instance + * @retval status + */ +uint8_t USBD_CDC_ReceivePacket(USBD_HandleTypeDef *pdev) +{ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*) pdev->pClassData; + + /* Suspend or Resume USB Out process */ + if(pdev->pClassData != NULL) + { + if(pdev->dev_speed == USBD_SPEED_HIGH ) + { + /* Prepare Out endpoint to receive next packet */ + USBD_LL_PrepareReceive(pdev, + CDC_OUT_EP, + hcdc->RxBuffer, + CDC_DATA_HS_OUT_PACKET_SIZE); + } + else + { + /* Prepare Out endpoint to receive next packet */ + USBD_LL_PrepareReceive(pdev, + CDC_OUT_EP, + hcdc->RxBuffer, + CDC_DATA_FS_OUT_PACKET_SIZE); + } + return USBD_OK; + } + else + { + return USBD_FAIL; + } +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h b/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h new file mode 100644 index 0000000..013a5c1 --- /dev/null +++ b/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_core.h @@ -0,0 +1,167 @@ +/** + ****************************************************************************** + * @file usbd_core.h + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief Header file for usbd_core.c file + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_CORE_H +#define __USBD_CORE_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_conf.h" +#include "usbd_def.h" +#include "usbd_ioreq.h" +#include "usbd_ctlreq.h" + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_CORE + * @brief This file is the Header file for usbd_core.c file + * @{ + */ + + +/** @defgroup USBD_CORE_Exported_Defines + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_CORE_Exported_TypesDefinitions + * @{ + */ + + +/** + * @} + */ + + + +/** @defgroup USBD_CORE_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_CORE_Exported_Variables + * @{ + */ +#define USBD_SOF USBD_LL_SOF +/** + * @} + */ + +/** @defgroup USBD_CORE_Exported_FunctionsPrototype + * @{ + */ +USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id); +USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass); + +USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx); +USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx); + +USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup); +USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata); +USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata); + +USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed); +USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev); + +USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum); +USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum); + +USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev); + +/* USBD Low Level Driver */ +USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev); +USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t ep_type, + uint16_t ep_mps); + +USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr); +USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr); +USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr); +USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr); +uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr); +USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr); +USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t *pbuf, + uint16_t size); + +USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t *pbuf, + uint16_t size); + +uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr); +void USBD_LL_Delay (uint32_t Delay); + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_CORE_H */ + +/** + * @} + */ + +/** +* @} +*/ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + + + diff --git a/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h b/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h new file mode 100644 index 0000000..bf88252 --- /dev/null +++ b/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ctlreq.h @@ -0,0 +1,113 @@ +/** + ****************************************************************************** + * @file usbd_req.h + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief Header file for the usbd_req.c file + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USB_REQUEST_H +#define __USB_REQUEST_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_def.h" + + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_REQ + * @brief header file for the usbd_req.c file + * @{ + */ + +/** @defgroup USBD_REQ_Exported_Defines + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_REQ_Exported_Types + * @{ + */ +/** + * @} + */ + + + +/** @defgroup USBD_REQ_Exported_Macros + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_REQ_Exported_Variables + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_REQ_Exported_FunctionsPrototype + * @{ + */ + +USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); +USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); +USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); + + +void USBD_CtlError (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req); + +void USBD_ParseSetupRequest (USBD_SetupReqTypedef *req, uint8_t *pdata); + +void USBD_GetString (uint8_t *desc, uint8_t *unicode, uint16_t *len); +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USB_REQUEST_H */ + +/** + * @} + */ + +/** +* @} +*/ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h b/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h new file mode 100644 index 0000000..8fbe81e --- /dev/null +++ b/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_def.h @@ -0,0 +1,330 @@ +/** + ****************************************************************************** + * @file usbd_def.h + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief General defines for the usb device library + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_DEF_H +#define __USBD_DEF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_conf.h" + +/** @addtogroup STM32_USBD_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USB_DEF + * @brief general defines for the usb device library file + * @{ + */ + +/** @defgroup USB_DEF_Exported_Defines + * @{ + */ + +#ifndef NULL +#define NULL 0 +#endif + + +#define USB_LEN_DEV_QUALIFIER_DESC 0x0A +#define USB_LEN_DEV_DESC 0x12 +#define USB_LEN_CFG_DESC 0x09 +#define USB_LEN_IF_DESC 0x09 +#define USB_LEN_EP_DESC 0x07 +#define USB_LEN_OTG_DESC 0x03 +#define USB_LEN_LANGID_STR_DESC 0x04 +#define USB_LEN_OTHER_SPEED_DESC_SIZ 0x09 + +#define USBD_IDX_LANGID_STR 0x00 +#define USBD_IDX_MFC_STR 0x01 +#define USBD_IDX_PRODUCT_STR 0x02 +#define USBD_IDX_SERIAL_STR 0x03 +#define USBD_IDX_CONFIG_STR 0x04 +#define USBD_IDX_INTERFACE_STR 0x05 + +#define USB_REQ_TYPE_STANDARD 0x00 +#define USB_REQ_TYPE_CLASS 0x20 +#define USB_REQ_TYPE_VENDOR 0x40 +#define USB_REQ_TYPE_MASK 0x60 + +#define USB_REQ_RECIPIENT_DEVICE 0x00 +#define USB_REQ_RECIPIENT_INTERFACE 0x01 +#define USB_REQ_RECIPIENT_ENDPOINT 0x02 +#define USB_REQ_RECIPIENT_MASK 0x03 + +#define USB_REQ_GET_STATUS 0x00 +#define USB_REQ_CLEAR_FEATURE 0x01 +#define USB_REQ_SET_FEATURE 0x03 +#define USB_REQ_SET_ADDRESS 0x05 +#define USB_REQ_GET_DESCRIPTOR 0x06 +#define USB_REQ_SET_DESCRIPTOR 0x07 +#define USB_REQ_GET_CONFIGURATION 0x08 +#define USB_REQ_SET_CONFIGURATION 0x09 +#define USB_REQ_GET_INTERFACE 0x0A +#define USB_REQ_SET_INTERFACE 0x0B +#define USB_REQ_SYNCH_FRAME 0x0C + +#define USB_DESC_TYPE_DEVICE 1 +#define USB_DESC_TYPE_CONFIGURATION 2 +#define USB_DESC_TYPE_STRING 3 +#define USB_DESC_TYPE_INTERFACE 4 +#define USB_DESC_TYPE_ENDPOINT 5 +#define USB_DESC_TYPE_DEVICE_QUALIFIER 6 +#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 7 +#define USB_DESC_TYPE_BOS 0x0F + +#define USB_CONFIG_REMOTE_WAKEUP 2 +#define USB_CONFIG_SELF_POWERED 1 + +#define USB_FEATURE_EP_HALT 0 +#define USB_FEATURE_REMOTE_WAKEUP 1 +#define USB_FEATURE_TEST_MODE 2 + +#define USB_DEVICE_CAPABITY_TYPE 0x10 + +#define USB_HS_MAX_PACKET_SIZE 512 +#define USB_FS_MAX_PACKET_SIZE 64 +#define USB_MAX_EP0_SIZE 64 + +/* Device Status */ +#define USBD_STATE_DEFAULT 1 +#define USBD_STATE_ADDRESSED 2 +#define USBD_STATE_CONFIGURED 3 +#define USBD_STATE_SUSPENDED 4 + + +/* EP0 State */ +#define USBD_EP0_IDLE 0 +#define USBD_EP0_SETUP 1 +#define USBD_EP0_DATA_IN 2 +#define USBD_EP0_DATA_OUT 3 +#define USBD_EP0_STATUS_IN 4 +#define USBD_EP0_STATUS_OUT 5 +#define USBD_EP0_STALL 6 + +#define USBD_EP_TYPE_CTRL 0 +#define USBD_EP_TYPE_ISOC 1 +#define USBD_EP_TYPE_BULK 2 +#define USBD_EP_TYPE_INTR 3 + + +/** + * @} + */ + + +/** @defgroup USBD_DEF_Exported_TypesDefinitions + * @{ + */ + +typedef struct usb_setup_req +{ + + uint8_t bmRequest; + uint8_t bRequest; + uint16_t wValue; + uint16_t wIndex; + uint16_t wLength; +}USBD_SetupReqTypedef; + +struct _USBD_HandleTypeDef; + +typedef struct _Device_cb +{ + uint8_t (*Init) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx); + uint8_t (*DeInit) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx); + /* Control Endpoints*/ + uint8_t (*Setup) (struct _USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req); + uint8_t (*EP0_TxSent) (struct _USBD_HandleTypeDef *pdev ); + uint8_t (*EP0_RxReady) (struct _USBD_HandleTypeDef *pdev ); + /* Class Specific Endpoints*/ + uint8_t (*DataIn) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum); + uint8_t (*DataOut) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum); + uint8_t (*SOF) (struct _USBD_HandleTypeDef *pdev); + uint8_t (*IsoINIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum); + uint8_t (*IsoOUTIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum); + + uint8_t *(*GetHSConfigDescriptor)(uint16_t *length); + uint8_t *(*GetFSConfigDescriptor)(uint16_t *length); + uint8_t *(*GetOtherSpeedConfigDescriptor)(uint16_t *length); + uint8_t *(*GetDeviceQualifierDescriptor)(uint16_t *length); +#if (USBD_SUPPORT_USER_STRING == 1) + uint8_t *(*GetUsrStrDescriptor)(struct _USBD_HandleTypeDef *pdev ,uint8_t index, uint16_t *length); +#endif + +} USBD_ClassTypeDef; + +/* Following USB Device Speed */ +typedef enum +{ + USBD_SPEED_HIGH = 0, + USBD_SPEED_FULL = 1, + USBD_SPEED_LOW = 2, +}USBD_SpeedTypeDef; + +/* Following USB Device status */ +typedef enum { + USBD_OK = 0, + USBD_BUSY, + USBD_FAIL, +}USBD_StatusTypeDef; + +/* USB Device descriptors structure */ +typedef struct +{ + uint8_t *(*GetDeviceDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); + uint8_t *(*GetLangIDStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); + uint8_t *(*GetManufacturerStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); + uint8_t *(*GetProductStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); + uint8_t *(*GetSerialStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); + uint8_t *(*GetConfigurationStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); + uint8_t *(*GetInterfaceStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); +#if (USBD_LPM_ENABLED == 1) + uint8_t *(*GetBOSDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length); +#endif +} USBD_DescriptorsTypeDef; + +/* USB Device handle structure */ +typedef struct +{ + uint32_t status; + uint32_t total_length; + uint32_t rem_length; + uint32_t maxpacket; +} USBD_EndpointTypeDef; + +/* USB Device handle structure */ +typedef struct _USBD_HandleTypeDef +{ + uint8_t id; + uint32_t dev_config; + uint32_t dev_default_config; + uint32_t dev_config_status; + USBD_SpeedTypeDef dev_speed; + USBD_EndpointTypeDef ep_in[15]; + USBD_EndpointTypeDef ep_out[15]; + uint32_t ep0_state; + uint32_t ep0_data_len; + uint8_t dev_state; + uint8_t dev_old_state; + uint8_t dev_address; + uint8_t dev_connection_status; + uint8_t dev_test_mode; + uint32_t dev_remote_wakeup; + + USBD_SetupReqTypedef request; + USBD_DescriptorsTypeDef *pDesc; + USBD_ClassTypeDef *pClass; + void *pClassData; + void *pUserData; + void *pData; +} USBD_HandleTypeDef; + +/** + * @} + */ + + + +/** @defgroup USBD_DEF_Exported_Macros + * @{ + */ +#define SWAPBYTE(addr) (((uint16_t)(*((uint8_t *)(addr)))) + \ + (((uint16_t)(*(((uint8_t *)(addr)) + 1))) << 8)) + +#define LOBYTE(x) ((uint8_t)(x & 0x00FF)) +#define HIBYTE(x) ((uint8_t)((x & 0xFF00) >>8)) +#define MIN(a, b) (((a) < (b)) ? (a) : (b)) +#define MAX(a, b) (((a) > (b)) ? (a) : (b)) + + +#if defined ( __GNUC__ ) + #ifndef __weak + #define __weak __attribute__((weak)) + #endif /* __weak */ + #ifndef __packed + #define __packed __attribute__((__packed__)) + #endif /* __packed */ +#endif /* __GNUC__ */ + + +/* In HS mode and when the DMA is used, all variables and data structures dealing + with the DMA during the transaction process should be 4-bytes aligned */ + +#if defined (__GNUC__) /* GNU Compiler */ + #define __ALIGN_END __attribute__ ((aligned (4))) + #define __ALIGN_BEGIN +#else + #define __ALIGN_END + #if defined (__CC_ARM) /* ARM Compiler */ + #define __ALIGN_BEGIN __align(4) + #elif defined (__ICCARM__) /* IAR Compiler */ + #define __ALIGN_BEGIN + #elif defined (__TASKING__) /* TASKING Compiler */ + #define __ALIGN_BEGIN __align(4) + #endif /* __CC_ARM */ +#endif /* __GNUC__ */ + + +/** + * @} + */ + +/** @defgroup USBD_DEF_Exported_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_DEF_Exported_FunctionsPrototype + * @{ + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_DEF_H */ + +/** + * @} + */ + +/** +* @} +*/ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h b/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h new file mode 100644 index 0000000..b476307 --- /dev/null +++ b/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Inc/usbd_ioreq.h @@ -0,0 +1,128 @@ +/** + ****************************************************************************** + * @file usbd_ioreq.h + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief Header file for the usbd_ioreq.c file + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __USBD_IOREQ_H +#define __USBD_IOREQ_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_def.h" +#include "usbd_core.h" + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_IOREQ + * @brief header file for the usbd_ioreq.c file + * @{ + */ + +/** @defgroup USBD_IOREQ_Exported_Defines + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Exported_Types + * @{ + */ + + +/** + * @} + */ + + + +/** @defgroup USBD_IOREQ_Exported_Macros + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_IOREQ_Exported_Variables + * @{ + */ + +/** + * @} + */ + +/** @defgroup USBD_IOREQ_Exported_FunctionsPrototype + * @{ + */ + +USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev, + uint8_t *buf, + uint16_t len); + +USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len); + +USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len); + +USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len); + +USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev); + +USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev); + +uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev , + uint8_t epnum); + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __USBD_IOREQ_H */ + +/** + * @} + */ + +/** +* @} +*/ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c b/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c new file mode 100644 index 0000000..0158829 --- /dev/null +++ b/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_core.c @@ -0,0 +1,565 @@ +/** + ****************************************************************************** + * @file usbd_core.c + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief This file provides all the USBD core functions. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_core.h" + +/** @addtogroup STM32_USBD_DEVICE_LIBRARY +* @{ +*/ + + +/** @defgroup USBD_CORE +* @brief usbd core module +* @{ +*/ + +/** @defgroup USBD_CORE_Private_TypesDefinitions +* @{ +*/ +/** +* @} +*/ + + +/** @defgroup USBD_CORE_Private_Defines +* @{ +*/ + +/** +* @} +*/ + + +/** @defgroup USBD_CORE_Private_Macros +* @{ +*/ +/** +* @} +*/ + + + + +/** @defgroup USBD_CORE_Private_FunctionPrototypes +* @{ +*/ + +/** +* @} +*/ + +/** @defgroup USBD_CORE_Private_Variables +* @{ +*/ + +/** +* @} +*/ + +/** @defgroup USBD_CORE_Private_Functions +* @{ +*/ + +/** +* @brief USBD_Init +* Initializes the device stack and load the class driver +* @param pdev: device instance +* @param pdesc: Descriptor structure address +* @param id: Low level core index +* @retval None +*/ +USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id) +{ + /* Check whether the USB Host handle is valid */ + if(pdev == NULL) + { + USBD_ErrLog("Invalid Device handle"); + return USBD_FAIL; + } + + /* Unlink previous class*/ + if(pdev->pClass != NULL) + { + pdev->pClass = NULL; + } + + /* Assign USBD Descriptors */ + if(pdesc != NULL) + { + pdev->pDesc = pdesc; + } + + /* Set Device initial State */ + pdev->dev_state = USBD_STATE_DEFAULT; + pdev->id = id; + /* Initialize low level driver */ + USBD_LL_Init(pdev); + + return USBD_OK; +} + +/** +* @brief USBD_DeInit +* Re-Initialize th device library +* @param pdev: device instance +* @retval status: status +*/ +USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev) +{ + /* Set Default State */ + pdev->dev_state = USBD_STATE_DEFAULT; + + /* Free Class Resources */ + pdev->pClass->DeInit(pdev, pdev->dev_config); + + /* Stop the low level driver */ + USBD_LL_Stop(pdev); + + /* Initialize low level driver */ + USBD_LL_DeInit(pdev); + + return USBD_OK; +} + + +/** + * @brief USBD_RegisterClass + * Link class driver to Device Core. + * @param pDevice : Device Handle + * @param pclass: Class handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass) +{ + USBD_StatusTypeDef status = USBD_OK; + if(pclass != 0) + { + /* link the class to the USB Device handle */ + pdev->pClass = pclass; + status = USBD_OK; + } + else + { + USBD_ErrLog("Invalid Class handle"); + status = USBD_FAIL; + } + + return status; +} + +/** + * @brief USBD_Start + * Start the USB Device Core. + * @param pdev: Device Handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev) +{ + + /* Start the low level driver */ + USBD_LL_Start(pdev); + + return USBD_OK; +} + +/** + * @brief USBD_Stop + * Stop the USB Device Core. + * @param pdev: Device Handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev) +{ + /* Free Class Resources */ + pdev->pClass->DeInit(pdev, pdev->dev_config); + + /* Stop the low level driver */ + USBD_LL_Stop(pdev); + + return USBD_OK; +} + +/** +* @brief USBD_RunTestMode +* Launch test mode process +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev) +{ + return USBD_OK; +} + + +/** +* @brief USBD_SetClassConfig +* Configure device and start the interface +* @param pdev: device instance +* @param cfgidx: configuration index +* @retval status +*/ + +USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx) +{ + USBD_StatusTypeDef ret = USBD_FAIL; + + if(pdev->pClass != NULL) + { + /* Set configuration and Start the Class*/ + if(pdev->pClass->Init(pdev, cfgidx) == 0) + { + ret = USBD_OK; + } + } + return ret; +} + +/** +* @brief USBD_ClrClassConfig +* Clear current configuration +* @param pdev: device instance +* @param cfgidx: configuration index +* @retval status: USBD_StatusTypeDef +*/ +USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx) +{ + /* Clear configuration and De-initialize the Class process*/ + pdev->pClass->DeInit(pdev, cfgidx); + return USBD_OK; +} + + +/** +* @brief USBD_SetupStage +* Handle the setup stage +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup) +{ + + USBD_ParseSetupRequest(&pdev->request, psetup); + + pdev->ep0_state = USBD_EP0_SETUP; + pdev->ep0_data_len = pdev->request.wLength; + + switch (pdev->request.bmRequest & 0x1F) + { + case USB_REQ_RECIPIENT_DEVICE: + USBD_StdDevReq (pdev, &pdev->request); + break; + + case USB_REQ_RECIPIENT_INTERFACE: + USBD_StdItfReq(pdev, &pdev->request); + break; + + case USB_REQ_RECIPIENT_ENDPOINT: + USBD_StdEPReq(pdev, &pdev->request); + break; + + default: + USBD_LL_StallEP(pdev , pdev->request.bmRequest & 0x80); + break; + } + return USBD_OK; +} + +/** +* @brief USBD_DataOutStage +* Handle data OUT stage +* @param pdev: device instance +* @param epnum: endpoint index +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata) +{ + USBD_EndpointTypeDef *pep; + + if(epnum == 0) + { + pep = &pdev->ep_out[0]; + + if ( pdev->ep0_state == USBD_EP0_DATA_OUT) + { + if(pep->rem_length > pep->maxpacket) + { + pep->rem_length -= pep->maxpacket; + + USBD_CtlContinueRx (pdev, + pdata, + MIN(pep->rem_length ,pep->maxpacket)); + } + else + { + if((pdev->pClass->EP0_RxReady != NULL)&& + (pdev->dev_state == USBD_STATE_CONFIGURED)) + { + pdev->pClass->EP0_RxReady(pdev); + } + USBD_CtlSendStatus(pdev); + } + } + } + else if((pdev->pClass->DataOut != NULL)&& + (pdev->dev_state == USBD_STATE_CONFIGURED)) + { + pdev->pClass->DataOut(pdev, epnum); + } + return USBD_OK; +} + +/** +* @brief USBD_DataInStage +* Handle data in stage +* @param pdev: device instance +* @param epnum: endpoint index +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev ,uint8_t epnum, uint8_t *pdata) +{ + USBD_EndpointTypeDef *pep; + + if(epnum == 0) + { + pep = &pdev->ep_in[0]; + + if ( pdev->ep0_state == USBD_EP0_DATA_IN) + { + if(pep->rem_length > pep->maxpacket) + { + pep->rem_length -= pep->maxpacket; + + USBD_CtlContinueSendData (pdev, + pdata, + pep->rem_length); + + /* Prepare endpoint for premature end of transfer */ + USBD_LL_PrepareReceive (pdev, + 0, + NULL, + 0); + } + else + { /* last packet is MPS multiple, so send ZLP packet */ + if((pep->total_length % pep->maxpacket == 0) && + (pep->total_length >= pep->maxpacket) && + (pep->total_length < pdev->ep0_data_len )) + { + + USBD_CtlContinueSendData(pdev , NULL, 0); + pdev->ep0_data_len = 0; + + /* Prepare endpoint for premature end of transfer */ + USBD_LL_PrepareReceive (pdev, + 0, + NULL, + 0); + } + else + { + if((pdev->pClass->EP0_TxSent != NULL)&& + (pdev->dev_state == USBD_STATE_CONFIGURED)) + { + pdev->pClass->EP0_TxSent(pdev); + } + USBD_CtlReceiveStatus(pdev); + } + } + } + if (pdev->dev_test_mode == 1) + { + USBD_RunTestMode(pdev); + pdev->dev_test_mode = 0; + } + } + else if((pdev->pClass->DataIn != NULL)&& + (pdev->dev_state == USBD_STATE_CONFIGURED)) + { + pdev->pClass->DataIn(pdev, epnum); + } + return USBD_OK; +} + +/** +* @brief USBD_LL_Reset +* Handle Reset event +* @param pdev: device instance +* @retval status +*/ + +USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev) +{ + /* Open EP0 OUT */ + USBD_LL_OpenEP(pdev, + 0x00, + USBD_EP_TYPE_CTRL, + USB_MAX_EP0_SIZE); + + pdev->ep_out[0].maxpacket = USB_MAX_EP0_SIZE; + + /* Open EP0 IN */ + USBD_LL_OpenEP(pdev, + 0x80, + USBD_EP_TYPE_CTRL, + USB_MAX_EP0_SIZE); + + pdev->ep_in[0].maxpacket = USB_MAX_EP0_SIZE; + /* Upon Reset call user call back */ + pdev->dev_state = USBD_STATE_DEFAULT; + + if (pdev->pClassData) + pdev->pClass->DeInit(pdev, pdev->dev_config); + + + return USBD_OK; +} + + + + +/** +* @brief USBD_LL_Reset +* Handle Reset event +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed) +{ + pdev->dev_speed = speed; + return USBD_OK; +} + +/** +* @brief USBD_Suspend +* Handle Suspend event +* @param pdev: device instance +* @retval status +*/ + +USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev) +{ + pdev->dev_old_state = pdev->dev_state; + pdev->dev_state = USBD_STATE_SUSPENDED; + return USBD_OK; +} + +/** +* @brief USBD_Resume +* Handle Resume event +* @param pdev: device instance +* @retval status +*/ + +USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev) +{ + pdev->dev_state = pdev->dev_old_state; + return USBD_OK; +} + +/** +* @brief USBD_SOF +* Handle SOF event +* @param pdev: device instance +* @retval status +*/ + +USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev) +{ + if(pdev->dev_state == USBD_STATE_CONFIGURED) + { + if(pdev->pClass->SOF != NULL) + { + pdev->pClass->SOF(pdev); + } + } + return USBD_OK; +} + +/** +* @brief USBD_IsoINIncomplete +* Handle iso in incomplete event +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum) +{ + return USBD_OK; +} + +/** +* @brief USBD_IsoOUTIncomplete +* Handle iso out incomplete event +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum) +{ + return USBD_OK; +} + +/** +* @brief USBD_DevConnected +* Handle device connection event +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev) +{ + return USBD_OK; +} + +/** +* @brief USBD_DevDisconnected +* Handle device disconnection event +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev) +{ + /* Free Class Resources */ + pdev->dev_state = USBD_STATE_DEFAULT; + pdev->pClass->DeInit(pdev, pdev->dev_config); + + return USBD_OK; +} +/** +* @} +*/ + + +/** +* @} +*/ + + +/** +* @} +*/ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c b/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c new file mode 100644 index 0000000..49330c6 --- /dev/null +++ b/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ctlreq.c @@ -0,0 +1,782 @@ +/** + ****************************************************************************** + * @file usbd_req.c + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief This file provides the standard USB requests following chapter 9. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_ctlreq.h" +#include "usbd_ioreq.h" + + +/** @addtogroup STM32_USBD_STATE_DEVICE_LIBRARY + * @{ + */ + + +/** @defgroup USBD_REQ + * @brief USB standard requests module + * @{ + */ + +/** @defgroup USBD_REQ_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_Defines + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_Macros + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_Variables + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_FunctionPrototypes + * @{ + */ +static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req); + +static void USBD_SetAddress(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req); + +static void USBD_SetConfig(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req); + +static void USBD_GetConfig(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req); + +static void USBD_GetStatus(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req); + +static void USBD_SetFeature(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req); + +static void USBD_ClrFeature(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req); + +static uint8_t USBD_GetLen(uint8_t *buf); + +/** + * @} + */ + + +/** @defgroup USBD_REQ_Private_Functions + * @{ + */ + + +/** +* @brief USBD_StdDevReq +* Handle standard usb device requests +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req) +{ + USBD_StatusTypeDef ret = USBD_OK; + + switch (req->bRequest) + { + case USB_REQ_GET_DESCRIPTOR: + + USBD_GetDescriptor (pdev, req) ; + break; + + case USB_REQ_SET_ADDRESS: + USBD_SetAddress(pdev, req); + break; + + case USB_REQ_SET_CONFIGURATION: + USBD_SetConfig (pdev , req); + break; + + case USB_REQ_GET_CONFIGURATION: + USBD_GetConfig (pdev , req); + break; + + case USB_REQ_GET_STATUS: + USBD_GetStatus (pdev , req); + break; + + + case USB_REQ_SET_FEATURE: + USBD_SetFeature (pdev , req); + break; + + case USB_REQ_CLEAR_FEATURE: + USBD_ClrFeature (pdev , req); + break; + + default: + USBD_CtlError(pdev , req); + break; + } + + return ret; +} + +/** +* @brief USBD_StdItfReq +* Handle standard usb interface requests +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req) +{ + USBD_StatusTypeDef ret = USBD_OK; + + switch (pdev->dev_state) + { + case USBD_STATE_CONFIGURED: + + if (LOBYTE(req->wIndex) <= USBD_MAX_NUM_INTERFACES) + { + pdev->pClass->Setup (pdev, req); + + if((req->wLength == 0)&& (ret == USBD_OK)) + { + USBD_CtlSendStatus(pdev); + } + } + else + { + USBD_CtlError(pdev , req); + } + break; + + default: + USBD_CtlError(pdev , req); + break; + } + return USBD_OK; +} + +/** +* @brief USBD_StdEPReq +* Handle standard usb endpoint requests +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req) +{ + + uint8_t ep_addr; + USBD_StatusTypeDef ret = USBD_OK; + USBD_EndpointTypeDef *pep; + ep_addr = LOBYTE(req->wIndex); + + /* Check if it is a class request */ + if ((req->bmRequest & 0x60) == 0x20) + { + pdev->pClass->Setup (pdev, req); + + return USBD_OK; + } + + switch (req->bRequest) + { + + case USB_REQ_SET_FEATURE : + + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + if ((ep_addr != 0x00) && (ep_addr != 0x80)) + { + USBD_LL_StallEP(pdev , ep_addr); + } + break; + + case USBD_STATE_CONFIGURED: + if (req->wValue == USB_FEATURE_EP_HALT) + { + if ((ep_addr != 0x00) && (ep_addr != 0x80)) + { + USBD_LL_StallEP(pdev , ep_addr); + + } + } + pdev->pClass->Setup (pdev, req); + USBD_CtlSendStatus(pdev); + + break; + + default: + USBD_CtlError(pdev , req); + break; + } + break; + + case USB_REQ_CLEAR_FEATURE : + + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + if ((ep_addr != 0x00) && (ep_addr != 0x80)) + { + USBD_LL_StallEP(pdev , ep_addr); + } + break; + + case USBD_STATE_CONFIGURED: + if (req->wValue == USB_FEATURE_EP_HALT) + { + if ((ep_addr & 0x7F) != 0x00) + { + USBD_LL_ClearStallEP(pdev , ep_addr); + pdev->pClass->Setup (pdev, req); + } + USBD_CtlSendStatus(pdev); + } + break; + + default: + USBD_CtlError(pdev , req); + break; + } + break; + + case USB_REQ_GET_STATUS: + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + if ((ep_addr & 0x7F) != 0x00) + { + USBD_LL_StallEP(pdev , ep_addr); + } + break; + + case USBD_STATE_CONFIGURED: + pep = ((ep_addr & 0x80) == 0x80) ? &pdev->ep_in[ep_addr & 0x7F]:\ + &pdev->ep_out[ep_addr & 0x7F]; + if(USBD_LL_IsStallEP(pdev, ep_addr)) + { + pep->status = 0x0001; + } + else + { + pep->status = 0x0000; + } + + USBD_CtlSendData (pdev, + (uint8_t *)&pep->status, + 2); + break; + + default: + USBD_CtlError(pdev , req); + break; + } + break; + + default: + break; + } + return ret; +} +/** +* @brief USBD_GetDescriptor +* Handle Get Descriptor requests +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + uint16_t len; + uint8_t *pbuf; + + + switch (req->wValue >> 8) + { +#if (USBD_LPM_ENABLED == 1) + case USB_DESC_TYPE_BOS: + pbuf = pdev->pDesc->GetBOSDescriptor(pdev->dev_speed, &len); + break; +#endif + case USB_DESC_TYPE_DEVICE: + pbuf = pdev->pDesc->GetDeviceDescriptor(pdev->dev_speed, &len); + break; + + case USB_DESC_TYPE_CONFIGURATION: + if(pdev->dev_speed == USBD_SPEED_HIGH ) + { + pbuf = (uint8_t *)pdev->pClass->GetHSConfigDescriptor(&len); + pbuf[1] = USB_DESC_TYPE_CONFIGURATION; + } + else + { + pbuf = (uint8_t *)pdev->pClass->GetFSConfigDescriptor(&len); + pbuf[1] = USB_DESC_TYPE_CONFIGURATION; + } + break; + + case USB_DESC_TYPE_STRING: + switch ((uint8_t)(req->wValue)) + { + case USBD_IDX_LANGID_STR: + pbuf = pdev->pDesc->GetLangIDStrDescriptor(pdev->dev_speed, &len); + break; + + case USBD_IDX_MFC_STR: + pbuf = pdev->pDesc->GetManufacturerStrDescriptor(pdev->dev_speed, &len); + break; + + case USBD_IDX_PRODUCT_STR: + pbuf = pdev->pDesc->GetProductStrDescriptor(pdev->dev_speed, &len); + break; + + case USBD_IDX_SERIAL_STR: + pbuf = pdev->pDesc->GetSerialStrDescriptor(pdev->dev_speed, &len); + break; + + case USBD_IDX_CONFIG_STR: + pbuf = pdev->pDesc->GetConfigurationStrDescriptor(pdev->dev_speed, &len); + break; + + case USBD_IDX_INTERFACE_STR: + pbuf = pdev->pDesc->GetInterfaceStrDescriptor(pdev->dev_speed, &len); + break; + + default: +#if (USBD_SUPPORT_USER_STRING == 1) + pbuf = pdev->pClass->GetUsrStrDescriptor(pdev, (req->wValue) , &len); + break; +#else + USBD_CtlError(pdev , req); + return; +#endif + } + break; + case USB_DESC_TYPE_DEVICE_QUALIFIER: + + if(pdev->dev_speed == USBD_SPEED_HIGH ) + { + pbuf = (uint8_t *)pdev->pClass->GetDeviceQualifierDescriptor(&len); + break; + } + else + { + USBD_CtlError(pdev , req); + return; + } + + case USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION: + if(pdev->dev_speed == USBD_SPEED_HIGH ) + { + pbuf = (uint8_t *)pdev->pClass->GetOtherSpeedConfigDescriptor(&len); + pbuf[1] = USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION; + break; + } + else + { + USBD_CtlError(pdev , req); + return; + } + + default: + USBD_CtlError(pdev , req); + return; + } + + if((len != 0)&& (req->wLength != 0)) + { + + len = MIN(len , req->wLength); + + USBD_CtlSendData (pdev, + pbuf, + len); + } + +} + +/** +* @brief USBD_SetAddress +* Set device address +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_SetAddress(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + uint8_t dev_addr; + + if ((req->wIndex == 0) && (req->wLength == 0)) + { + dev_addr = (uint8_t)(req->wValue) & 0x7F; + + if (pdev->dev_state == USBD_STATE_CONFIGURED) + { + USBD_CtlError(pdev , req); + } + else + { + pdev->dev_address = dev_addr; + USBD_LL_SetUSBAddress(pdev, dev_addr); + USBD_CtlSendStatus(pdev); + + if (dev_addr != 0) + { + pdev->dev_state = USBD_STATE_ADDRESSED; + } + else + { + pdev->dev_state = USBD_STATE_DEFAULT; + } + } + } + else + { + USBD_CtlError(pdev , req); + } +} + +/** +* @brief USBD_SetConfig +* Handle Set device configuration request +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_SetConfig(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + + static uint8_t cfgidx; + + cfgidx = (uint8_t)(req->wValue); + + if (cfgidx > USBD_MAX_NUM_CONFIGURATION ) + { + USBD_CtlError(pdev , req); + } + else + { + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + if (cfgidx) + { + pdev->dev_config = cfgidx; + pdev->dev_state = USBD_STATE_CONFIGURED; + if(USBD_SetClassConfig(pdev , cfgidx) == USBD_FAIL) + { + USBD_CtlError(pdev , req); + return; + } + USBD_CtlSendStatus(pdev); + } + else + { + USBD_CtlSendStatus(pdev); + } + break; + + case USBD_STATE_CONFIGURED: + if (cfgidx == 0) + { + pdev->dev_state = USBD_STATE_ADDRESSED; + pdev->dev_config = cfgidx; + USBD_ClrClassConfig(pdev , cfgidx); + USBD_CtlSendStatus(pdev); + + } + else if (cfgidx != pdev->dev_config) + { + /* Clear old configuration */ + USBD_ClrClassConfig(pdev , pdev->dev_config); + + /* set new configuration */ + pdev->dev_config = cfgidx; + if(USBD_SetClassConfig(pdev , cfgidx) == USBD_FAIL) + { + USBD_CtlError(pdev , req); + return; + } + USBD_CtlSendStatus(pdev); + } + else + { + USBD_CtlSendStatus(pdev); + } + break; + + default: + USBD_CtlError(pdev , req); + break; + } + } +} + +/** +* @brief USBD_GetConfig +* Handle Get device configuration request +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_GetConfig(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + + if (req->wLength != 1) + { + USBD_CtlError(pdev , req); + } + else + { + switch (pdev->dev_state ) + { + case USBD_STATE_ADDRESSED: + pdev->dev_default_config = 0; + USBD_CtlSendData (pdev, + (uint8_t *)&pdev->dev_default_config, + 1); + break; + + case USBD_STATE_CONFIGURED: + + USBD_CtlSendData (pdev, + (uint8_t *)&pdev->dev_config, + 1); + break; + + default: + USBD_CtlError(pdev , req); + break; + } + } +} + +/** +* @brief USBD_GetStatus +* Handle Get Status request +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_GetStatus(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + + + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + case USBD_STATE_CONFIGURED: + +#if ( USBD_SELF_POWERED == 1) + pdev->dev_config_status = USB_CONFIG_SELF_POWERED; +#else + pdev->dev_config_status = 0; +#endif + + if (pdev->dev_remote_wakeup) + { + pdev->dev_config_status |= USB_CONFIG_REMOTE_WAKEUP; + } + + USBD_CtlSendData (pdev, + (uint8_t *)& pdev->dev_config_status, + 2); + break; + + default : + USBD_CtlError(pdev , req); + break; + } +} + + +/** +* @brief USBD_SetFeature +* Handle Set device feature request +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_SetFeature(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + + if (req->wValue == USB_FEATURE_REMOTE_WAKEUP) + { + pdev->dev_remote_wakeup = 1; + pdev->pClass->Setup (pdev, req); + USBD_CtlSendStatus(pdev); + } + +} + + +/** +* @brief USBD_ClrFeature +* Handle clear device feature request +* @param pdev: device instance +* @param req: usb request +* @retval status +*/ +static void USBD_ClrFeature(USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + switch (pdev->dev_state) + { + case USBD_STATE_ADDRESSED: + case USBD_STATE_CONFIGURED: + if (req->wValue == USB_FEATURE_REMOTE_WAKEUP) + { + pdev->dev_remote_wakeup = 0; + pdev->pClass->Setup (pdev, req); + USBD_CtlSendStatus(pdev); + } + break; + + default : + USBD_CtlError(pdev , req); + break; + } +} + +/** +* @brief USBD_ParseSetupRequest +* Copy buffer into setup structure +* @param pdev: device instance +* @param req: usb request +* @retval None +*/ + +void USBD_ParseSetupRequest(USBD_SetupReqTypedef *req, uint8_t *pdata) +{ + req->bmRequest = *(uint8_t *) (pdata); + req->bRequest = *(uint8_t *) (pdata + 1); + req->wValue = SWAPBYTE (pdata + 2); + req->wIndex = SWAPBYTE (pdata + 4); + req->wLength = SWAPBYTE (pdata + 6); + +} + +/** +* @brief USBD_CtlError +* Handle USB low level Error +* @param pdev: device instance +* @param req: usb request +* @retval None +*/ + +void USBD_CtlError( USBD_HandleTypeDef *pdev , + USBD_SetupReqTypedef *req) +{ + USBD_LL_StallEP(pdev , 0x80); + USBD_LL_StallEP(pdev , 0); +} + + +/** + * @brief USBD_GetString + * Convert Ascii string into unicode one + * @param desc : descriptor buffer + * @param unicode : Formatted string buffer (unicode) + * @param len : descriptor length + * @retval None + */ +void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len) +{ + uint8_t idx = 0; + + if (desc != NULL) + { + *len = USBD_GetLen(desc) * 2 + 2; + unicode[idx++] = *len; + unicode[idx++] = USB_DESC_TYPE_STRING; + + while (*desc != '\0') + { + unicode[idx++] = *desc++; + unicode[idx++] = 0x00; + } + } +} + +/** + * @brief USBD_GetLen + * return the string length + * @param buf : pointer to the ascii string buffer + * @retval string length + */ +static uint8_t USBD_GetLen(uint8_t *buf) +{ + uint8_t len = 0; + + while (*buf != '\0') + { + len++; + buf++; + } + + return len; +} +/** + * @} + */ + + +/** + * @} + */ + + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c b/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c new file mode 100644 index 0000000..093afad --- /dev/null +++ b/stm32cubemx/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c @@ -0,0 +1,236 @@ +/** + ****************************************************************************** + * @file usbd_ioreq.c + * @author MCD Application Team + * @version V2.4.2 + * @date 11-December-2015 + * @brief This file provides the IO requests APIs for control endpoints. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2015 STMicroelectronics

+ * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_ioreq.h" + +/** @addtogroup STM32_USB_DEVICE_LIBRARY + * @{ + */ + + +/** @defgroup USBD_IOREQ + * @brief control I/O requests module + * @{ + */ + +/** @defgroup USBD_IOREQ_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_Defines + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_Macros + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_Variables + * @{ + */ + +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_FunctionPrototypes + * @{ + */ +/** + * @} + */ + + +/** @defgroup USBD_IOREQ_Private_Functions + * @{ + */ + +/** +* @brief USBD_CtlSendData +* send data on the ctl pipe +* @param pdev: device instance +* @param buff: pointer to data buffer +* @param len: length of data to be sent +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len) +{ + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_DATA_IN; + pdev->ep_in[0].total_length = len; + pdev->ep_in[0].rem_length = len; + /* Start the transfer */ + USBD_LL_Transmit (pdev, 0x00, pbuf, len); + + return USBD_OK; +} + +/** +* @brief USBD_CtlContinueSendData +* continue sending data on the ctl pipe +* @param pdev: device instance +* @param buff: pointer to data buffer +* @param len: length of data to be sent +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len) +{ + /* Start the next transfer */ + USBD_LL_Transmit (pdev, 0x00, pbuf, len); + + return USBD_OK; +} + +/** +* @brief USBD_CtlPrepareRx +* receive data on the ctl pipe +* @param pdev: device instance +* @param buff: pointer to data buffer +* @param len: length of data to be received +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len) +{ + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_DATA_OUT; + pdev->ep_out[0].total_length = len; + pdev->ep_out[0].rem_length = len; + /* Start the transfer */ + USBD_LL_PrepareReceive (pdev, + 0, + pbuf, + len); + + return USBD_OK; +} + +/** +* @brief USBD_CtlContinueRx +* continue receive data on the ctl pipe +* @param pdev: device instance +* @param buff: pointer to data buffer +* @param len: length of data to be received +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev, + uint8_t *pbuf, + uint16_t len) +{ + + USBD_LL_PrepareReceive (pdev, + 0, + pbuf, + len); + return USBD_OK; +} +/** +* @brief USBD_CtlSendStatus +* send zero lzngth packet on the ctl pipe +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev) +{ + + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_STATUS_IN; + + /* Start the transfer */ + USBD_LL_Transmit (pdev, 0x00, NULL, 0); + + return USBD_OK; +} + +/** +* @brief USBD_CtlReceiveStatus +* receive zero lzngth packet on the ctl pipe +* @param pdev: device instance +* @retval status +*/ +USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev) +{ + /* Set EP0 State */ + pdev->ep0_state = USBD_EP0_STATUS_OUT; + + /* Start the transfer */ + USBD_LL_PrepareReceive ( pdev, + 0, + NULL, + 0); + + return USBD_OK; +} + + +/** +* @brief USBD_GetRxCount +* returns the received data length +* @param pdev: device instance +* @param ep_addr: endpoint address +* @retval Rx Data blength +*/ +uint16_t USBD_GetRxCount (USBD_HandleTypeDef *pdev , uint8_t ep_addr) +{ + return USBD_LL_GetRxDataSize(pdev, ep_addr); +} + +/** + * @} + */ + + +/** + * @} + */ + + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Src/main.c b/stm32cubemx/Src/main.c index e9fdb8e..0afb615 100644 --- a/stm32cubemx/Src/main.c +++ b/stm32cubemx/Src/main.c @@ -4,43 +4,53 @@ * Description : Main program body ****************************************************************************** * - * COPYRIGHT(c) 2017 STMicroelectronics + * Copyright (c) 2017 STMicroelectronics International N.V. + * All rights reserved. * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ +#include #include "main.h" #include "stm32f1xx_hal.h" +#include "usb_device.h" /* USER CODE BEGIN Includes */ /* USER CODE END Includes */ /* Private variables ---------------------------------------------------------*/ -IWDG_HandleTypeDef hiwdg; - TIM_HandleTypeDef htim1; DMA_HandleTypeDef hdma_tim1_ch1; @@ -55,7 +65,6 @@ void Error_Handler(void); static void MX_GPIO_Init(void); static void MX_DMA_Init(void); static void MX_TIM1_Init(void); -static void MX_IWDG_Init(void); static void MX_NVIC_Init(void); /* USER CODE BEGIN PFP */ @@ -86,7 +95,7 @@ int main(void) MX_GPIO_Init(); MX_DMA_Init(); MX_TIM1_Init(); - MX_IWDG_Init(); + MX_USB_DEVICE_Init(); /* Initialize interrupts */ MX_NVIC_Init(); @@ -115,14 +124,14 @@ void SystemClock_Config(void) RCC_OscInitTypeDef RCC_OscInitStruct; RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_PeriphCLKInitTypeDef PeriphClkInit; /**Initializes the CPU, AHB and APB busses clocks */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; RCC_OscInitStruct.HSEState = RCC_HSE_ON; RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; RCC_OscInitStruct.HSIState = RCC_HSI_ON; - RCC_OscInitStruct.LSIState = RCC_LSI_ON; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; @@ -141,6 +150,13 @@ void SystemClock_Config(void) RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) + { + Error_Handler(); + } + + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB; + PeriphClkInit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) { Error_Handler(); } @@ -166,20 +182,6 @@ static void MX_NVIC_Init(void) HAL_NVIC_EnableIRQ(TIM1_TRG_COM_IRQn); } -/* IWDG init function */ -static void MX_IWDG_Init(void) -{ - - hiwdg.Instance = IWDG; - hiwdg.Init.Prescaler = IWDG_PRESCALER_4; - hiwdg.Init.Reload = 4095; - if (HAL_IWDG_Init(&hiwdg) != HAL_OK) - { - Error_Handler(); - } - -} - /* TIM1 init function */ static void MX_TIM1_Init(void) { @@ -219,7 +221,7 @@ static void MX_TIM1_Init(void) /** * Enable DMA controller clock */ -static void MX_DMA_Init(void) +static void MX_DMA_Init(void) { /* DMA controller clock enable */ __HAL_RCC_DMA1_CLK_ENABLE(); @@ -261,10 +263,10 @@ void Error_Handler(void) { /* USER CODE BEGIN Error_Handler */ /* User can add his own implementation to report the HAL error return state */ - while(1) + while(1) { } - /* USER CODE END Error_Handler */ + /* USER CODE END Error_Handler */ } #ifdef USE_FULL_ASSERT @@ -289,10 +291,10 @@ void assert_failed(uint8_t* file, uint32_t line) /** * @} - */ + */ /** * @} -*/ +*/ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Src/stm32f1xx_hal_msp.c b/stm32cubemx/Src/stm32f1xx_hal_msp.c index be02361..f0cb212 100644 --- a/stm32cubemx/Src/stm32f1xx_hal_msp.c +++ b/stm32cubemx/Src/stm32f1xx_hal_msp.c @@ -5,29 +5,39 @@ * and de-Initialization codes. ****************************************************************************** * - * COPYRIGHT(c) 2017 STMicroelectronics + * Copyright (c) 2017 STMicroelectronics International N.V. + * All rights reserved. * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ diff --git a/stm32cubemx/Src/stm32f1xx_it.c b/stm32cubemx/Src/stm32f1xx_it.c index 473a07a..a71b015 100644 --- a/stm32cubemx/Src/stm32f1xx_it.c +++ b/stm32cubemx/Src/stm32f1xx_it.c @@ -36,10 +36,11 @@ #include "stm32f1xx_it.h" /* USER CODE BEGIN 0 */ - +#include "main.h" /* USER CODE END 0 */ /* External variables --------------------------------------------------------*/ +extern PCD_HandleTypeDef hpcd_USB_FS; extern DMA_HandleTypeDef hdma_tim1_ch1; extern TIM_HandleTypeDef htim1; @@ -199,13 +200,41 @@ void DMA1_Channel2_IRQHandler(void) /* USER CODE END DMA1_Channel2_IRQn 1 */ } +/** +* @brief This function handles USB high priority or CAN TX interrupts. +*/ +void USB_HP_CAN1_TX_IRQHandler(void) +{ + /* USER CODE BEGIN USB_HP_CAN1_TX_IRQn 0 */ + + /* USER CODE END USB_HP_CAN1_TX_IRQn 0 */ + HAL_PCD_IRQHandler(&hpcd_USB_FS); + /* USER CODE BEGIN USB_HP_CAN1_TX_IRQn 1 */ + + /* USER CODE END USB_HP_CAN1_TX_IRQn 1 */ +} + +/** +* @brief This function handles USB low priority or CAN RX0 interrupts. +*/ +void USB_LP_CAN1_RX0_IRQHandler(void) +{ + /* USER CODE BEGIN USB_LP_CAN1_RX0_IRQn 0 */ + + /* USER CODE END USB_LP_CAN1_RX0_IRQn 0 */ + HAL_PCD_IRQHandler(&hpcd_USB_FS); + /* USER CODE BEGIN USB_LP_CAN1_RX0_IRQn 1 */ + + /* USER CODE END USB_LP_CAN1_RX0_IRQn 1 */ +} + /** * @brief This function handles TIM1 trigger and commutation interrupts. */ void TIM1_TRG_COM_IRQHandler(void) { /* USER CODE BEGIN TIM1_TRG_COM_IRQn 0 */ - + it_tim1(&htim1); /* USER CODE END TIM1_TRG_COM_IRQn 0 */ HAL_TIM_IRQHandler(&htim1); /* USER CODE BEGIN TIM1_TRG_COM_IRQn 1 */ diff --git a/stm32cubemx/Src/usb_device.c b/stm32cubemx/Src/usb_device.c new file mode 100644 index 0000000..2a51b5e --- /dev/null +++ b/stm32cubemx/Src/usb_device.c @@ -0,0 +1,77 @@ +/** + ****************************************************************************** + * @file : USB_DEVICE + * @version : v2.0_Cube + * @brief : This file implements the USB Device + ****************************************************************************** + * + * Copyright (c) 2017 STMicroelectronics International N.V. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** +*/ + +/* Includes ------------------------------------------------------------------*/ + +#include "usb_device.h" +#include "usbd_core.h" +#include "usbd_desc.h" +#include "usbd_cdc.h" +#include "usbd_cdc_if.h" + +/* USB Device Core handle declaration */ +USBD_HandleTypeDef hUsbDeviceFS; + +/* init function */ +void MX_USB_DEVICE_Init(void) +{ + /* Init Device Library,Add Supported Class and Start the library*/ + USBD_Init(&hUsbDeviceFS, &FS_Desc, DEVICE_FS); + + USBD_RegisterClass(&hUsbDeviceFS, &USBD_CDC); + + USBD_CDC_RegisterInterface(&hUsbDeviceFS, &USBD_Interface_fops_FS); + + USBD_Start(&hUsbDeviceFS); + +} +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Src/usbd_cdc_if.c b/stm32cubemx/Src/usbd_cdc_if.c new file mode 100644 index 0000000..a468e94 --- /dev/null +++ b/stm32cubemx/Src/usbd_cdc_if.c @@ -0,0 +1,322 @@ +/** + ****************************************************************************** + * @file : usbd_cdc_if.c + * @brief : + ****************************************************************************** + * + * Copyright (c) 2017 STMicroelectronics International N.V. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** +*/ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_cdc_if.h" +/* USER CODE BEGIN INCLUDE */ +/* USER CODE END INCLUDE */ + +/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_CDC + * @brief usbd core module + * @{ + */ + +/** @defgroup USBD_CDC_Private_TypesDefinitions + * @{ + */ +/* USER CODE BEGIN PRIVATE_TYPES */ +/* USER CODE END PRIVATE_TYPES */ +/** + * @} + */ + +/** @defgroup USBD_CDC_Private_Defines + * @{ + */ +/* USER CODE BEGIN PRIVATE_DEFINES */ +/* Define size for the receive and transmit buffer over CDC */ +/* It's up to user to redefine and/or remove those define */ +#define APP_RX_DATA_SIZE 4 +#define APP_TX_DATA_SIZE 4 +/* USER CODE END PRIVATE_DEFINES */ +/** + * @} + */ + +/** @defgroup USBD_CDC_Private_Macros + * @{ + */ +/* USER CODE BEGIN PRIVATE_MACRO */ +/* USER CODE END PRIVATE_MACRO */ + +/** + * @} + */ + +/** @defgroup USBD_CDC_Private_Variables + * @{ + */ +/* Create buffer for reception and transmission */ +/* It's up to user to redefine and/or remove those define */ +/* Received Data over USB are stored in this buffer */ +uint8_t UserRxBufferFS[APP_RX_DATA_SIZE]; + +/* Send Data over USB CDC are stored in this buffer */ +uint8_t UserTxBufferFS[APP_TX_DATA_SIZE]; + +/* USER CODE BEGIN PRIVATE_VARIABLES */ +/* USER CODE END PRIVATE_VARIABLES */ + +/** + * @} + */ + +/** @defgroup USBD_CDC_IF_Exported_Variables + * @{ + */ + extern USBD_HandleTypeDef hUsbDeviceFS; +/* USER CODE BEGIN EXPORTED_VARIABLES */ +/* USER CODE END EXPORTED_VARIABLES */ + +/** + * @} + */ + +/** @defgroup USBD_CDC_Private_FunctionPrototypes + * @{ + */ +static int8_t CDC_Init_FS (void); +static int8_t CDC_DeInit_FS (void); +static int8_t CDC_Control_FS (uint8_t cmd, uint8_t* pbuf, uint16_t length); +static int8_t CDC_Receive_FS (uint8_t* pbuf, uint32_t *Len); + +/* USER CODE BEGIN PRIVATE_FUNCTIONS_DECLARATION */ +/* USER CODE END PRIVATE_FUNCTIONS_DECLARATION */ + +/** + * @} + */ + +USBD_CDC_ItfTypeDef USBD_Interface_fops_FS = +{ + CDC_Init_FS, + CDC_DeInit_FS, + CDC_Control_FS, + CDC_Receive_FS +}; + +/* Private functions ---------------------------------------------------------*/ +/** + * @brief CDC_Init_FS + * Initializes the CDC media low layer over the FS USB IP + * @param None + * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL + */ +static int8_t CDC_Init_FS(void) +{ + /* USER CODE BEGIN 3 */ + /* Set Application Buffers */ + USBD_CDC_SetTxBuffer(&hUsbDeviceFS, UserTxBufferFS, 0); + USBD_CDC_SetRxBuffer(&hUsbDeviceFS, UserRxBufferFS); + printf("%s: \n", __FUNCTION__); + return (USBD_OK); + /* USER CODE END 3 */ +} + +/** + * @brief CDC_DeInit_FS + * DeInitializes the CDC media low layer + * @param None + * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL + */ +static int8_t CDC_DeInit_FS(void) +{ + /* USER CODE BEGIN 4 */ + printf("%s: \n", __FUNCTION__); + return (USBD_OK); + /* USER CODE END 4 */ +} + +/** + * @brief CDC_Control_FS + * Manage the CDC class requests + * @param cmd: Command code + * @param pbuf: Buffer containing command data (request parameters) + * @param length: Number of data to be sent (in bytes) + * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL + */ +static int8_t CDC_Control_FS (uint8_t cmd, uint8_t* pbuf, uint16_t length) +{ + /* USER CODE BEGIN 5 */ + switch (cmd) + { + case CDC_SEND_ENCAPSULATED_COMMAND: + + break; + + case CDC_GET_ENCAPSULATED_RESPONSE: + + break; + + case CDC_SET_COMM_FEATURE: + + break; + + case CDC_GET_COMM_FEATURE: + + break; + + case CDC_CLEAR_COMM_FEATURE: + + break; + + /*******************************************************************************/ + /* Line Coding Structure */ + /*-----------------------------------------------------------------------------*/ + /* Offset | Field | Size | Value | Description */ + /* 0 | dwDTERate | 4 | Number |Data terminal rate, in bits per second*/ + /* 4 | bCharFormat | 1 | Number | Stop bits */ + /* 0 - 1 Stop bit */ + /* 1 - 1.5 Stop bits */ + /* 2 - 2 Stop bits */ + /* 5 | bParityType | 1 | Number | Parity */ + /* 0 - None */ + /* 1 - Odd */ + /* 2 - Even */ + /* 3 - Mark */ + /* 4 - Space */ + /* 6 | bDataBits | 1 | Number Data bits (5, 6, 7, 8 or 16). */ + /*******************************************************************************/ + case CDC_SET_LINE_CODING: { + uint32_t bps = pbuf[0] << 24 | pbuf[1] << 16 | pbuf[2] << 8 | pbuf[3]; + const char *stop_bits = pbuf[4] == 0 ? "1" : pbuf[4] == 1 ? "1.5" : "2"; + const char *parities[5] = {"none", "odd", "even", "mark", "space"}; + const char *parity = parities[pbuf[5]]; + int bits = pbuf[6]; + printf("Line coding, bps=%lu, bits=%s, parity=%s, bits=%d\n", bps, stop_bits, parity, bits); + } + break; + + case CDC_GET_LINE_CODING: + + break; + + case CDC_SET_CONTROL_LINE_STATE: + + break; + + case CDC_SEND_BREAK: + + break; + + default: + break; + } + + return (USBD_OK); + /* USER CODE END 5 */ +} + +/** + * @brief CDC_Receive_FS + * Data received over USB OUT endpoint are sent over CDC interface + * through this function. + * + * @note + * This function will block any OUT packet reception on USB endpoint + * untill exiting this function. If you exit this function before transfer + * is complete on CDC interface (ie. using DMA controller) it will result + * in receiving more data while previous ones are still not sent. + * + * @param Buf: Buffer of data to be received + * @param Len: Number of data received (in bytes) + * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL + */ +static int8_t CDC_Receive_FS (uint8_t* Buf, uint32_t *Len) +{ + /* USER CODE BEGIN 6 */ + USBD_CDC_SetRxBuffer(&hUsbDeviceFS, &Buf[0]); + USBD_CDC_ReceivePacket(&hUsbDeviceFS); + + printf("USB OUT: len=%lu, data=", *Len); + for(uint32_t i = 0; i < *Len; i++) { + printf("%02x", Buf[i]); + } + printf("\n"); + + return (USBD_OK); + /* USER CODE END 6 */ +} + +/** + * @brief CDC_Transmit_FS + * Data send over USB IN endpoint are sent over CDC interface + * through this function. + * @note + * + * + * @param Buf: Buffer of data to be send + * @param Len: Number of data to be send (in bytes) + * @retval Result of the operation: USBD_OK if all operations are OK else USBD_FAIL or USBD_BUSY + */ +uint8_t CDC_Transmit_FS(uint8_t* Buf, uint16_t Len) +{ + uint8_t result = USBD_OK; + /* USER CODE BEGIN 7 */ + USBD_CDC_HandleTypeDef *hcdc = (USBD_CDC_HandleTypeDef*)hUsbDeviceFS.pClassData; + if (hcdc->TxState != 0){ + return USBD_BUSY; + } + USBD_CDC_SetTxBuffer(&hUsbDeviceFS, Buf, Len); + result = USBD_CDC_TransmitPacket(&hUsbDeviceFS); + /* USER CODE END 7 */ + return result; +} + +/* USER CODE BEGIN PRIVATE_FUNCTIONS_IMPLEMENTATION */ +/* USER CODE END PRIVATE_FUNCTIONS_IMPLEMENTATION */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/stm32cubemx/Src/usbd_conf.c b/stm32cubemx/Src/usbd_conf.c new file mode 100644 index 0000000..61661bf --- /dev/null +++ b/stm32cubemx/Src/usbd_conf.c @@ -0,0 +1,754 @@ +/** + ****************************************************************************** + * @file : usbd_conf.c + * @version : v2.0_Cube + * @brief : This file implements the board support package for the USB device library + ****************************************************************************** + * + * Copyright (c) 2017 STMicroelectronics International N.V. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** +*/ +/* Includes ------------------------------------------------------------------*/ +#include "stm32f1xx.h" +#include "stm32f1xx_hal.h" +#include "usbd_def.h" +#include "usbd_core.h" +#include "usbd_cdc.h" +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +PCD_HandleTypeDef hpcd_USB_FS; +void Error_Handler(void); + +/* USER CODE BEGIN 0 */ +/* USER CODE END 0 */ + +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ +/* USER CODE BEGIN 1 */ +/* USER CODE END 1 */ +void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state); + +/******************************************************************************* + LL Driver Callbacks (PCD -> USB Device Library) +*******************************************************************************/ +/* MSP Init */ + +void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle) +{ + if(pcdHandle->Instance==USB) + { + /* USER CODE BEGIN USB_MspInit 0 */ + + /* USER CODE END USB_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_USB_CLK_ENABLE(); + + /* Peripheral interrupt init */ + HAL_NVIC_SetPriority(USB_HP_CAN1_TX_IRQn, 0, 0); + HAL_NVIC_EnableIRQ(USB_HP_CAN1_TX_IRQn); + HAL_NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, 0, 0); + HAL_NVIC_EnableIRQ(USB_LP_CAN1_RX0_IRQn); + /* USER CODE BEGIN USB_MspInit 1 */ + + /* USER CODE END USB_MspInit 1 */ + } +} + +void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle) +{ + if(pcdHandle->Instance==USB) + { + /* USER CODE BEGIN USB_MspDeInit 0 */ + + /* USER CODE END USB_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USB_CLK_DISABLE(); + + /* Peripheral interrupt Deinit*/ + HAL_NVIC_DisableIRQ(USB_HP_CAN1_TX_IRQn); + + HAL_NVIC_DisableIRQ(USB_LP_CAN1_RX0_IRQn); + + /* USER CODE BEGIN USB_MspDeInit 1 */ + + /* USER CODE END USB_MspDeInit 1 */ + } +} + +/** + * @brief Setup Stage callback + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup); +} + +/** + * @brief Data Out Stage callback. + * @param hpcd: PCD handle + * @param epnum: Endpoint Number + * @retval None + */ +void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff); +} + +/** + * @brief Data In Stage callback.. + * @param hpcd: PCD handle + * @param epnum: Endpoint Number + * @retval None + */ +void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff); +} + +/** + * @brief SOF callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData); +} + +/** + * @brief Reset callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_SpeedTypeDef speed = USBD_SPEED_FULL; + + /*Set USB Current Speed*/ + switch (hpcd->Init.speed) + { + case PCD_SPEED_FULL: + speed = USBD_SPEED_FULL; + break; + + default: + speed = USBD_SPEED_FULL; + break; + } + USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, speed); + + /*Reset Device*/ + USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData); +} + +/** + * @brief Suspend callback. + * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it) + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) +{ + /* Inform USB library that core enters in suspend Mode */ + USBD_LL_Suspend((USBD_HandleTypeDef*)hpcd->pData); + /*Enter in STOP mode */ + /* USER CODE BEGIN 2 */ + if (hpcd->Init.low_power_enable) + { + /* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register */ + SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk)); + } + /* USER CODE END 2 */ +} + +/** + * @brief Resume callback. + * When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it) + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) +{ + /* USER CODE BEGIN 3 */ + /* USER CODE END 3 */ + USBD_LL_Resume((USBD_HandleTypeDef*)hpcd->pData); + +} + +/** + * @brief ISOOUTIncomplete callback. + * @param hpcd: PCD handle + * @param epnum: Endpoint Number + * @retval None + */ +void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum); +} + +/** + * @brief ISOINIncomplete callback. + * @param hpcd: PCD handle + * @param epnum: Endpoint Number + * @retval None + */ +void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) +{ + USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum); +} + +/** + * @brief ConnectCallback callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData); +} + +/** + * @brief Disconnect callback. + * @param hpcd: PCD handle + * @retval None + */ +void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) +{ + USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData); +} + +/******************************************************************************* + LL Driver Interface (USB Device Library --> PCD) +*******************************************************************************/ +/** + * @brief Initializes the Low Level portion of the Device driver. + * @param pdev: Device handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev) +{ + /* Init USB_IP */ + /* Link The driver to the stack */ + hpcd_USB_FS.pData = pdev; + pdev->pData = &hpcd_USB_FS; + + hpcd_USB_FS.Instance = USB; + hpcd_USB_FS.Init.dev_endpoints = 8; + hpcd_USB_FS.Init.speed = PCD_SPEED_FULL; + hpcd_USB_FS.Init.ep0_mps = DEP0CTL_MPS_8; + hpcd_USB_FS.Init.low_power_enable = DISABLE; + hpcd_USB_FS.Init.lpm_enable = DISABLE; + hpcd_USB_FS.Init.battery_charging_enable = DISABLE; + if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK) + { + Error_Handler(); + } + + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x00 , PCD_SNG_BUF, 0x18); + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x80 , PCD_SNG_BUF, 0x58); + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x81 , PCD_SNG_BUF, 0xC0); + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x01 , PCD_SNG_BUF, 0x110); + HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x82 , PCD_SNG_BUF, 0x100); + return USBD_OK; +} + +/** + * @brief De-Initializes the Low Level portion of the Device driver. + * @param pdev: Device handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_DeInit(pdev->pData); + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Starts the Low Level portion of the Device driver. + * @param pdev: Device handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_Start(pdev->pData); + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Stops the Low Level portion of the Device driver. + * @param pdev: Device handle + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_Stop(pdev->pData); + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Opens an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @param ep_type: Endpoint Type + * @param ep_mps: Endpoint Max Packet Size + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t ep_type, + uint16_t ep_mps) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_EP_Open(pdev->pData, + ep_addr, + ep_mps, + ep_type); + + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Closes an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_EP_Close(pdev->pData, ep_addr); + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Flushes an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_EP_Flush(pdev->pData, ep_addr); + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Sets a Stall condition on an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_EP_SetStall(pdev->pData, ep_addr); + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Clears a Stall condition on an endpoint of the Low Level Driver. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_EP_ClrStall(pdev->pData, ep_addr); + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Returns Stall condition. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval Stall (1: Yes, 0: No) + */ +uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*) pdev->pData; + + if((ep_addr & 0x80) == 0x80) + { + return hpcd->IN_ep[ep_addr & 0x7F].is_stall; + } + else + { + return hpcd->OUT_ep[ep_addr & 0x7F].is_stall; + } +} +/** + * @brief Assigns a USB address to the device. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_SetAddress(pdev->pData, dev_addr); + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Transmits data over an endpoint. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @param pbuf: Pointer to data to be sent + * @param size: Data size + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t *pbuf, + uint16_t size) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_EP_Transmit(pdev->pData, ep_addr, pbuf, size); + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Prepares an endpoint for reception. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @param pbuf: Pointer to data to be received + * @param size: Data size + * @retval USBD Status + */ +USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, + uint8_t ep_addr, + uint8_t *pbuf, + uint16_t size) +{ + HAL_StatusTypeDef hal_status = HAL_OK; + USBD_StatusTypeDef usb_status = USBD_OK; + + hal_status = HAL_PCD_EP_Receive(pdev->pData, ep_addr, pbuf, size); + + switch (hal_status) { + case HAL_OK : + usb_status = USBD_OK; + break; + case HAL_ERROR : + usb_status = USBD_FAIL; + break; + case HAL_BUSY : + usb_status = USBD_BUSY; + break; + case HAL_TIMEOUT : + usb_status = USBD_FAIL; + break; + default : + usb_status = USBD_FAIL; + break; + } + return usb_status; +} + +/** + * @brief Returns the last transfered packet size. + * @param pdev: Device handle + * @param ep_addr: Endpoint Number + * @retval Recived Data Size + */ +uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr) +{ + return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*) pdev->pData, ep_addr); +} + +/** + * @brief Delays routine for the USB Device Library. + * @param Delay: Delay in ms + * @retval None + */ +void USBD_LL_Delay (uint32_t Delay) +{ + HAL_Delay(Delay); +} + +/** + * @brief static single allocation. + * @param size: size of allocated memory + * @retval None + */ +void *USBD_static_malloc(uint32_t size) +{ + static uint32_t mem[(sizeof(USBD_CDC_HandleTypeDef)/4)+1];/* On 32-bit boundary */ + return mem; +} + +/** + * @brief Dummy memory free + * @param *p pointer to allocated memory address + * @retval None + */ +void USBD_static_free(void *p) +{ + +} + +/** +* @brief Software Device Connection +* @param hpcd: PCD handle +* @param state: connection state (0 : disconnected / 1: connected) +* @retval None +*/ +void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state) +{ +/* USER CODE BEGIN 5 */ + if (state == 1) + { + /* Configure Low Connection State */ + + } + else + { + /* Configure High Connection State */ + + } +/* USER CODE END 5 */ +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/Src/usbd_desc.c b/stm32cubemx/Src/usbd_desc.c new file mode 100644 index 0000000..b153354 --- /dev/null +++ b/stm32cubemx/Src/usbd_desc.c @@ -0,0 +1,307 @@ +/** + ****************************************************************************** + * @file : usbd_desc.c + * @version : v2.0_Cube + * @brief : This file implements the USB Device descriptors + ****************************************************************************** + * + * Copyright (c) 2017 STMicroelectronics International N.V. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted, provided that the following conditions are met: + * + * 1. Redistribution of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of other + * contributors to this software may be used to endorse or promote products + * derived from this software without specific written permission. + * 4. This software, including modifications and/or derivative works of this + * software, must execute solely and exclusively on microcontroller or + * microprocessor devices manufactured by or for STMicroelectronics. + * 5. Redistribution and use of this software other than as permitted under + * this license is void and will automatically terminate your rights under + * this license. + * + * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A + * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY + * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT + * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** +*/ + +/* Includes ------------------------------------------------------------------*/ +#include "usbd_core.h" +#include "usbd_desc.h" +#include "usbd_conf.h" + +/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY + * @{ + */ + +/** @defgroup USBD_DESC + * @brief USBD descriptors module + * @{ + */ + +/** @defgroup USBD_DESC_Private_TypesDefinitions + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_DESC_Private_Defines + * @{ + */ +#define USBD_VID 1155 +#define USBD_LANGID_STRING 1033 +#define USBD_MANUFACTURER_STRING "STMicroelectronics" +#define USBD_PID_FS 22336 +#define USBD_PRODUCT_STRING_FS "STM32 Virtual ComPort" +#define USBD_SERIALNUMBER_STRING_FS "00000000001A" +#define USBD_CONFIGURATION_STRING_FS "CDC Config" +#define USBD_INTERFACE_STRING_FS "CDC Interface" + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0*/ +/** + * @} + */ + +/** @defgroup USBD_DESC_Private_Macros + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_DESC_Private_Variables + * @{ + */ +uint8_t * USBD_FS_DeviceDescriptor( USBD_SpeedTypeDef speed , uint16_t *length); +uint8_t * USBD_FS_LangIDStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length); +uint8_t * USBD_FS_ManufacturerStrDescriptor ( USBD_SpeedTypeDef speed , uint16_t *length); +uint8_t * USBD_FS_ProductStrDescriptor ( USBD_SpeedTypeDef speed , uint16_t *length); +uint8_t * USBD_FS_SerialStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length); +uint8_t * USBD_FS_ConfigStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length); +uint8_t * USBD_FS_InterfaceStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length); + +#ifdef USB_SUPPORT_USER_STRING_DESC +uint8_t * USBD_FS_USRStringDesc (USBD_SpeedTypeDef speed, uint8_t idx , uint16_t *length); +#endif /* USB_SUPPORT_USER_STRING_DESC */ + +USBD_DescriptorsTypeDef FS_Desc = +{ + USBD_FS_DeviceDescriptor, + USBD_FS_LangIDStrDescriptor, + USBD_FS_ManufacturerStrDescriptor, + USBD_FS_ProductStrDescriptor, + USBD_FS_SerialStrDescriptor, + USBD_FS_ConfigStrDescriptor, + USBD_FS_InterfaceStrDescriptor, +}; + +#if defined ( __ICCARM__ ) /*!< IAR Compiler */ + #pragma data_alignment=4 +#endif +/* USB Standard Device Descriptor */ +__ALIGN_BEGIN uint8_t USBD_FS_DeviceDesc[USB_LEN_DEV_DESC] __ALIGN_END = + { + 0x12, /*bLength */ + USB_DESC_TYPE_DEVICE, /*bDescriptorType*/ + 0x00, /* bcdUSB */ + 0x02, + 0x02, /*bDeviceClass*/ + 0x02, /*bDeviceSubClass*/ + 0x00, /*bDeviceProtocol*/ + USB_MAX_EP0_SIZE, /*bMaxPacketSize*/ + LOBYTE(USBD_VID), /*idVendor*/ + HIBYTE(USBD_VID), /*idVendor*/ + LOBYTE(USBD_PID_FS), /*idVendor*/ + HIBYTE(USBD_PID_FS), /*idVendor*/ + 0x00, /*bcdDevice rel. 2.00*/ + 0x02, + USBD_IDX_MFC_STR, /*Index of manufacturer string*/ + USBD_IDX_PRODUCT_STR, /*Index of product string*/ + USBD_IDX_SERIAL_STR, /*Index of serial number string*/ + USBD_MAX_NUM_CONFIGURATION /*bNumConfigurations*/ + } ; +/* USB_DeviceDescriptor */ + +#if defined ( __ICCARM__ ) /*!< IAR Compiler */ + #pragma data_alignment=4 +#endif + +/* USB Standard Device Descriptor */ +__ALIGN_BEGIN uint8_t USBD_LangIDDesc[USB_LEN_LANGID_STR_DESC] __ALIGN_END = +{ + USB_LEN_LANGID_STR_DESC, + USB_DESC_TYPE_STRING, + LOBYTE(USBD_LANGID_STRING), + HIBYTE(USBD_LANGID_STRING), +}; + +#if defined ( __ICCARM__ ) /*!< IAR Compiler */ + #pragma data_alignment=4 +#endif +__ALIGN_BEGIN uint8_t USBD_StrDesc[USBD_MAX_STR_DESC_SIZ] __ALIGN_END; +/** + * @} + */ + +/** @defgroup USBD_DESC_Private_FunctionPrototypes + * @{ + */ +/** + * @} + */ + +/** @defgroup USBD_DESC_Private_Functions + * @{ + */ + +/** +* @brief USBD_FS_DeviceDescriptor +* return the device descriptor +* @param speed : current device speed +* @param length : pointer to data length variable +* @retval pointer to descriptor buffer +*/ +uint8_t * USBD_FS_DeviceDescriptor( USBD_SpeedTypeDef speed , uint16_t *length) +{ + *length = sizeof(USBD_FS_DeviceDesc); + return USBD_FS_DeviceDesc; +} + +/** +* @brief USBD_FS_LangIDStrDescriptor +* return the LangID string descriptor +* @param speed : current device speed +* @param length : pointer to data length variable +* @retval pointer to descriptor buffer +*/ +uint8_t * USBD_FS_LangIDStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length) +{ + *length = sizeof(USBD_LangIDDesc); + return USBD_LangIDDesc; +} + +/** +* @brief USBD_FS_ProductStrDescriptor +* return the product string descriptor +* @param speed : current device speed +* @param length : pointer to data length variable +* @retval pointer to descriptor buffer +*/ +uint8_t * USBD_FS_ProductStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length) +{ + if(speed == 0) + { + USBD_GetString (USBD_PRODUCT_STRING_FS, USBD_StrDesc, length); + } + else + { + USBD_GetString (USBD_PRODUCT_STRING_FS, USBD_StrDesc, length); + } + return USBD_StrDesc; +} + +/** +* @brief USBD_FS_ManufacturerStrDescriptor +* return the manufacturer string descriptor +* @param speed : current device speed +* @param length : pointer to data length variable +* @retval pointer to descriptor buffer +*/ +uint8_t * USBD_FS_ManufacturerStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length) +{ + USBD_GetString (USBD_MANUFACTURER_STRING, USBD_StrDesc, length); + return USBD_StrDesc; +} + +/** +* @brief USBD_FS_SerialStrDescriptor +* return the serial number string descriptor +* @param speed : current device speed +* @param length : pointer to data length variable +* @retval pointer to descriptor buffer +*/ +uint8_t * USBD_FS_SerialStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length) +{ + if(speed == USBD_SPEED_HIGH) + { + USBD_GetString (USBD_SERIALNUMBER_STRING_FS, USBD_StrDesc, length); + } + else + { + USBD_GetString (USBD_SERIALNUMBER_STRING_FS, USBD_StrDesc, length); + } + return USBD_StrDesc; +} + +/** +* @brief USBD_FS_ConfigStrDescriptor +* return the configuration string descriptor +* @param speed : current device speed +* @param length : pointer to data length variable +* @retval pointer to descriptor buffer +*/ +uint8_t * USBD_FS_ConfigStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length) +{ + if(speed == USBD_SPEED_HIGH) + { + USBD_GetString (USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length); + } + else + { + USBD_GetString (USBD_CONFIGURATION_STRING_FS, USBD_StrDesc, length); + } + return USBD_StrDesc; +} + +/** +* @brief USBD_HS_InterfaceStrDescriptor +* return the interface string descriptor +* @param speed : current device speed +* @param length : pointer to data length variable +* @retval pointer to descriptor buffer +*/ +uint8_t * USBD_FS_InterfaceStrDescriptor( USBD_SpeedTypeDef speed , uint16_t *length) +{ + if(speed == 0) + { + USBD_GetString (USBD_INTERFACE_STRING_FS, USBD_StrDesc, length); + } + else + { + USBD_GetString (USBD_INTERFACE_STRING_FS, USBD_StrDesc, length); + } + return USBD_StrDesc; +} +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/stm32cubemx/stm32cubemx.gpdsc b/stm32cubemx/stm32cubemx.gpdsc index c42a5f0..78b101c 100644 --- a/stm32cubemx/stm32cubemx.gpdsc +++ b/stm32cubemx/stm32cubemx.gpdsc @@ -1,7 +1,7 @@ @@ -12,7 +12,7 @@ /home/trygvis/dev/io.trygvis/2017/04/433-controller/stm32cubemx - - Generated: 29/04/2017 23:09:40 + - Generated: 30/04/2017 20:16:12 @@ -35,9 +35,17 @@ STM32CubeMX GPDSC