From 4d8f75c97b8f384f8452d27b50b68cf594bc779a Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Thu, 11 May 2017 12:15:54 +0200 Subject: o Cleaning up generated files, removing space at end of line. --- .../CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h | 50 +++++++++++----------- 1 file changed, 25 insertions(+), 25 deletions(-) (limited to 'stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h') diff --git a/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h b/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h index 5cd8880..7bd9429 100644 --- a/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h +++ b/stm32cubemx/Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h @@ -4,17 +4,17 @@ * @author MCD Application Team * @version V4.1.0 * @date 29-April-2016 - * @brief CMSIS STM32F1xx Device Peripheral Access Layer Header File. + * @brief CMSIS STM32F1xx Device Peripheral Access Layer Header File. * * The file is the unique include file that the application programmer * is using in the C source code, usually in main.c. This file contains: * - Configuration section that allows to select: * - The STM32F1xx device used in the target application - * - To use or not the peripheral’s drivers in application code(i.e. - * code will be based on direct access to peripheral’s registers - * rather than drivers API), this option is controlled by + * - To use or not the peripheral’s drivers in application code(i.e. + * code will be based on direct access to peripheral’s registers + * rather than drivers API), this option is controlled by * "#define USE_HAL_DRIVER" - * + * ****************************************************************************** * @attention * @@ -52,14 +52,14 @@ /** @addtogroup stm32f1xx * @{ */ - + #ifndef __STM32F1XX_H #define __STM32F1XX_H #ifdef __cplusplus extern "C" { #endif /* __cplusplus */ - + /** @addtogroup Library_configuration_section * @{ */ @@ -71,8 +71,8 @@ #define STM32F1 #endif /* STM32F1 */ -/* Uncomment the line below according to the target STM32L device used in your - application +/* Uncomment the line below according to the target STM32L device used in your + application */ #if !defined (STM32F100xB) && !defined (STM32F100xE) && !defined (STM32F101x6) && \ @@ -82,7 +82,7 @@ /* #define STM32F100xE */ /*!< STM32F100RC, STM32F100VC, STM32F100ZC, STM32F100RD, STM32F100VD, STM32F100ZD, STM32F100RE, STM32F100VE and STM32F100ZE */ /* #define STM32F101x6 */ /*!< STM32F101C4, STM32F101R4, STM32F101T4, STM32F101C6, STM32F101R6 and STM32F101T6 Devices */ /* #define STM32F101xB */ /*!< STM32F101C8, STM32F101R8, STM32F101T8, STM32F101V8, STM32F101CB, STM32F101RB, STM32F101TB and STM32F101VB */ - /* #define STM32F101xE */ /*!< STM32F101RC, STM32F101VC, STM32F101ZC, STM32F101RD, STM32F101VD, STM32F101ZD, STM32F101RE, STM32F101VE and STM32F101ZE */ + /* #define STM32F101xE */ /*!< STM32F101RC, STM32F101VC, STM32F101ZC, STM32F101RD, STM32F101VD, STM32F101ZD, STM32F101RE, STM32F101VE and STM32F101ZE */ /* #define STM32F101xG */ /*!< STM32F101RF, STM32F101VF, STM32F101ZF, STM32F101RG, STM32F101VG and STM32F101ZG */ /* #define STM32F102x6 */ /*!< STM32F102C4, STM32F102R4, STM32F102C6 and STM32F102R6 */ /* #define STM32F102xB */ /*!< STM32F102C8, STM32F102R8, STM32F102CB and STM32F102RB */ @@ -91,18 +91,18 @@ /* #define STM32F103xE */ /*!< STM32F103RC, STM32F103VC, STM32F103ZC, STM32F103RD, STM32F103VD, STM32F103ZD, STM32F103RE, STM32F103VE and STM32F103ZE */ /* #define STM32F103xG */ /*!< STM32F103RF, STM32F103VF, STM32F103ZF, STM32F103RG, STM32F103VG and STM32F103ZG */ /* #define STM32F105xC */ /*!< STM32F105R8, STM32F105V8, STM32F105RB, STM32F105VB, STM32F105RC and STM32F105VC */ - /* #define STM32F107xC */ /*!< STM32F107RB, STM32F107VB, STM32F107RC and STM32F107VC */ + /* #define STM32F107xC */ /*!< STM32F107RB, STM32F107VB, STM32F107RC and STM32F107VC */ #endif /* Tip: To avoid modifying this file each time you need to switch between these devices, you can define the device in your toolchain compiler preprocessor. */ - + #if !defined (USE_HAL_DRIVER) /** * @brief Comment the line below if you will not use the peripherals drivers. - In this case, these drivers will not be included and the application code will - be based on direct access to peripherals registers + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers */ /*#define USE_HAL_DRIVER */ #endif /* USE_HAL_DRIVER */ @@ -110,10 +110,10 @@ /** * @brief CMSIS Device version number */ -#define __STM32F1_CMSIS_VERSION_MAIN (0x04) /*!< [31:24] main version */ +#define __STM32F1_CMSIS_VERSION_MAIN (0x04) /*!< [31:24] main version */ #define __STM32F1_CMSIS_VERSION_SUB1 (0x01) /*!< [23:16] sub1 version */ #define __STM32F1_CMSIS_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ -#define __STM32F1_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */ +#define __STM32F1_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */ #define __STM32F1_CMSIS_VERSION ((__STM32F1_CMSIS_VERSION_MAIN << 24)\ |(__STM32F1_CMSIS_VERSION_SUB1 << 16)\ |(__STM32F1_CMSIS_VERSION_SUB2 << 8 )\ @@ -165,23 +165,23 @@ /** @addtogroup Exported_types * @{ - */ -typedef enum + */ +typedef enum { - RESET = 0, + RESET = 0, SET = !RESET } FlagStatus, ITStatus; -typedef enum +typedef enum { - DISABLE = 0, + DISABLE = 0, ENABLE = !DISABLE } FunctionalState; #define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) -typedef enum +typedef enum { - ERROR = 0, + ERROR = 0, SUCCESS = !ERROR } ErrorStatus; @@ -207,7 +207,7 @@ typedef enum #define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) -#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) +#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) /** @@ -231,7 +231,7 @@ typedef enum /** * @} */ - + -- cgit v1.2.3