diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/components/ble/ble_services/ble_hts/ble_hts.h')
-rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/components/ble/ble_services/ble_hts/ble_hts.h | 219 |
1 files changed, 219 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/ble/ble_services/ble_hts/ble_hts.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/ble/ble_services/ble_hts/ble_hts.h new file mode 100644 index 0000000..a9f76cd --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/ble/ble_services/ble_hts/ble_hts.h @@ -0,0 +1,219 @@ +/** + * Copyright (c) 2012 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +/** @file + * + * @defgroup ble_hts Health Thermometer Service + * @{ + * @ingroup ble_sdk_srv + * @brief Health Thermometer Service module. + * + * @details This module implements the Health Thermometer Service. + * + * If an event handler is supplied by the application, the Health Thermometer + * Service will generate Health Thermometer Service events to the application. + * + * @note The application must register this module as BLE event observer using the + * NRF_SDH_BLE_OBSERVER macro. Example: + * @code + * ble_hts_t instance; + * NRF_SDH_BLE_OBSERVER(anything, BLE_HTS_BLE_OBSERVER_PRIO, + * ble_hts_on_ble_evt, &instance); + * @endcode + * + * @note Attention! + * To maintain compliance with Nordic Semiconductor ASA Bluetooth profile + * qualification listings, this section of source code must not be modified. + */ + +#ifndef BLE_HTS_H__ +#define BLE_HTS_H__ + +#include <stdint.h> +#include <stdbool.h> +#include "ble.h" +#include "ble_srv_common.h" +#include "ble_date_time.h" +#include "nrf_sdh_ble.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/**@brief Macro for defining a ble_hts instance. + * + * @param _name Name of the instance. + * @hideinitializer + */ +#define BLE_HTS_DEF(_name) \ +static ble_hts_t _name; \ +NRF_SDH_BLE_OBSERVER(_name ## _obs, \ + BLE_HTS_BLE_OBSERVER_PRIO, \ + ble_hts_on_ble_evt, &_name) + +// Temperature Type measurement locations +#define BLE_HTS_TEMP_TYPE_ARMPIT 1 +#define BLE_HTS_TEMP_TYPE_BODY 2 +#define BLE_HTS_TEMP_TYPE_EAR 3 +#define BLE_HTS_TEMP_TYPE_FINGER 4 +#define BLE_HTS_TEMP_TYPE_GI_TRACT 5 +#define BLE_HTS_TEMP_TYPE_MOUTH 6 +#define BLE_HTS_TEMP_TYPE_RECTUM 7 +#define BLE_HTS_TEMP_TYPE_TOE 8 +#define BLE_HTS_TEMP_TYPE_EAR_DRUM 9 + + +/**@brief Health Thermometer Service event type. */ +typedef enum +{ + BLE_HTS_EVT_INDICATION_ENABLED, /**< Health Thermometer value indication enabled event. */ + BLE_HTS_EVT_INDICATION_DISABLED, /**< Health Thermometer value indication disabled event. */ + BLE_HTS_EVT_INDICATION_CONFIRMED /**< Confirmation of a temperature measurement indication has been received. */ +} ble_hts_evt_type_t; + +/**@brief Health Thermometer Service event. */ +typedef struct +{ + ble_hts_evt_type_t evt_type; /**< Type of event. */ +} ble_hts_evt_t; + +// Forward declaration of the ble_hts_t type. +typedef struct ble_hts_s ble_hts_t; + +/**@brief Health Thermometer Service event handler type. */ +typedef void (*ble_hts_evt_handler_t) (ble_hts_t * p_hts, ble_hts_evt_t * p_evt); + +/**@brief FLOAT format (IEEE-11073 32-bit FLOAT, defined as a 32-bit value with a 24-bit mantissa + * and an 8-bit exponent. */ +typedef struct +{ + int8_t exponent; /**< Base 10 exponent */ + int32_t mantissa; /**< Mantissa, should be using only 24 bits */ +} ieee_float32_t; + +/**@brief Health Thermometer Service init structure. This contains all options and data + * needed for initialization of the service. */ +typedef struct +{ + ble_hts_evt_handler_t evt_handler; /**< Event handler to be called for handling events in the Health Thermometer Service. */ + ble_srv_cccd_security_mode_t hts_meas_attr_md; /**< Initial security level for health thermometer measurement attribute */ + ble_srv_security_mode_t hts_temp_type_attr_md; /**< Initial security level for health thermometer tempearture type attribute */ + uint8_t temp_type_as_characteristic; /**< Set non-zero if temp type given as characteristic */ + uint8_t temp_type; /**< Temperature type if temperature characteristic is used */ +} ble_hts_init_t; + +/**@brief Health Thermometer Service structure. This contains various status information for + * the service. */ +struct ble_hts_s +{ + ble_hts_evt_handler_t evt_handler; /**< Event handler to be called for handling events in the Health Thermometer Service. */ + uint16_t service_handle; /**< Handle of Health Thermometer Service (as provided by the BLE stack). */ + ble_gatts_char_handles_t meas_handles; /**< Handles related to the Health Thermometer Measurement characteristic. */ + ble_gatts_char_handles_t temp_type_handles; /**< Handles related to the Health Thermometer Temperature Type characteristic. */ + uint16_t conn_handle; /**< Handle of the current connection (as provided by the BLE stack, is BLE_CONN_HANDLE_INVALID if not in a connection). */ + uint8_t temp_type; /**< Temperature type indicates where the measurement was taken. */ +}; + +/**@brief Health Thermometer Service measurement structure. This contains a Health Thermometer + * measurement. */ +typedef struct ble_hts_meas_s +{ + bool temp_in_fahr_units; /**< True if Temperature is in Fahrenheit units, Celcius otherwise. */ + bool time_stamp_present; /**< True if Time Stamp is present. */ + bool temp_type_present; /**< True if Temperature Type is present. */ + ieee_float32_t temp_in_celcius; /**< Temperature Measurement Value (Celcius). */ + ieee_float32_t temp_in_fahr; /**< Temperature Measurement Value (Fahrenheit). */ + ble_date_time_t time_stamp; /**< Time Stamp. */ + uint8_t temp_type; /**< Temperature Type. */ +} ble_hts_meas_t; + + +/**@brief Function for initializing the Health Thermometer Service. + * + * @param[out] p_hts Health Thermometer Service structure. This structure will have to + * be supplied by the application. It will be initialized by this function, + * and will later be used to identify this particular service instance. + * @param[in] p_hts_init Information needed to initialize the service. + * + * @return NRF_SUCCESS on successful initialization of service, otherwise an error code. + */ +uint32_t ble_hts_init(ble_hts_t * p_hts, const ble_hts_init_t * p_hts_init); + + +/**@brief Function for handling the Application's BLE Stack events. + * + * @details Handles all events from the BLE stack of interest to the Health Thermometer Service. + * + * @param[in] p_ble_evt Event received from the BLE stack. + * @param[in] p_context Health Thermometer Service structure. + */ +void ble_hts_on_ble_evt(ble_evt_t const * p_ble_evt, void * p_context); + + +/**@brief Function for sending health thermometer measurement if indication has been enabled. + * + * @details The application calls this function after having performed a Health Thermometer + * measurement. If indication has been enabled, the measurement data is encoded and + * sent to the client. + * + * @param[in] p_hts Health Thermometer Service structure. + * @param[in] p_hts_meas Pointer to new health thermometer measurement. + * + * @return NRF_SUCCESS on success, otherwise an error code. + */ +uint32_t ble_hts_measurement_send(ble_hts_t * p_hts, ble_hts_meas_t * p_hts_meas); + + +/**@brief Function for checking if indication of Temperature Measurement is currently enabled. + * + * @param[in] p_hts Health Thermometer Service structure. + * @param[out] p_indication_enabled TRUE if indication is enabled, FALSE otherwise. + * + * @return NRF_SUCCESS on success, otherwise an error code. + */ +uint32_t ble_hts_is_indication_enabled(ble_hts_t * p_hts, bool * p_indication_enabled); + + +#ifdef __cplusplus +} +#endif + +#endif // BLE_HTS_H__ + +/** @} */ |