diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/d52_starterkit.h')
-rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/d52_starterkit.h | 148 |
1 files changed, 148 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/d52_starterkit.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/d52_starterkit.h new file mode 100644 index 0000000..9c9d3cd --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/d52_starterkit.h @@ -0,0 +1,148 @@ +/** + * This software is subject to the ANT+ Shared Source License + * www.thisisant.com/swlicenses + * Copyright (c) Dynastream Innovations, Inc. 2016 + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * 1) Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * 2) Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * 3) Neither the name of Dynastream nor the names of its + * contributors may be used to endorse or promote products + * derived from this software without specific prior + * written permission. + * + * The following actions are prohibited: + * 1) Redistribution of source code containing the ANT+ Network + * Key. The ANT+ Network Key is available to ANT+ Adopters. + * Please refer to http://thisisant.com to become an ANT+ + * Adopter and access the key. + * + * 2) Reverse engineering, decompilation, and/or disassembly of + * software provided in binary form under this license. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; DAMAGE TO ANY DEVICE, LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. SOME STATES DO NOT ALLOW + * THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE + * ABOVE LIMITATIONS MAY NOT APPLY TO YOU. + * + */ +#ifndef D52STARTERKIT_H +#define D52STARTERKIT_H + +#include "nrf_gpio.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// LEDs definitions for D52DK1 +#define LEDS_NUMBER 4 + +// IO board active low leds +// D52DK1 does not define LED_START or LED_STOP since the LEDS are not on sequential pins +#define LED_A 24 //LED A on D52 Starter Kit IO Board +#define LED_B 31 //LED B on D52 Starter Kit IO Board +#define LED_C 17 //LED C on D52 Starter Kit IO Board +#define LED_D 20 //LED D on D52 Starter Kit IO Board + +#define LEDS_ACTIVE_STATE 0 + +#define LEDS_LIST { LED_A, LED_B, LED_C, LED_D } + +#define BSP_LED_0 LED_A +#define BSP_LED_1 LED_B +#define BSP_LED_2 LED_C +#define BSP_LED_3 LED_D + +#define LEDS_INV_MASK LEDS_MASK + +#define BUTTONS_NUMBER 4 + +// IO board pull-up buttons +#define BUTTON_A 6 //BUTTON A on D52 Starter Kit IO Board +#define BUTTON_B 7 //BUTTON B on D52 Starter Kit IO Board +#define BUTTON_C 16 //BUTTON C on D52 Starter Kit IO Board +#define BUTTON_D 19 //BUTTON D on D52 Starter Kit IO Board +#define BUTTON_PULL NRF_GPIO_PIN_PULLUP + +#define BUTTONS_ACTIVE_STATE 0 + +#define BSP_BUTTON_0 BUTTON_A +#define BSP_BUTTON_1 BUTTON_B +#define BSP_BUTTON_2 BUTTON_C +#define BSP_BUTTON_3 BUTTON_D + +#define BUTTONS_LIST { BUTTON_A, BUTTON_B, BUTTON_C, BUTTON_D } + +// Battery board pull-up switches +#define SWITCH_1 12 // Switch 1 on D52 Starter Kit Battery Board +#define SWITCH_2 8 // Switch 2 on D52 Starter Kit Battery Board +#define SWITCH_3 15 // Switch 3 on D52 Starter Kit Battery Board +#define SWITCH_4 11 // Switch 4 on D52 Starter Kit Battery Board +#define SWITCH_5 14 // Switch 5 on D52 Starter Kit Battery Board +#define SWITCH_PULL NRF_GPIO_PIN_PULLUP + +#define SWITCHES_NUMBER 5 + +#define BSP_SWITCH_0 SWITCH_1 +#define BSP_SWITCH_1 SWITCH_2 +#define BSP_SWITCH_2 SWITCH_3 +#define BSP_SWITCH_3 SWITCH_4 +#define BSP_SWITCH_4 SWITCH_5 + +#define BSP_SWITCH_0_MASK (1<<BSP_SWITCH_0) +#define BSP_SWITCH_1_MASK (1<<BSP_SWITCH_1) +#define BSP_SWITCH_2_MASK (1<<BSP_SWITCH_2) +#define BSP_SWITCH_3_MASK (1<<BSP_SWITCH_3) +#define BSP_SWITCH_4_MASK (1<<BSP_SWITCH_4) + +#define SWITCHES_MASK (BSP_SWITCH_0_MASK | BSP_SWITCH_1_MASK | BSP_SWITCH_2_MASK | BSP_SWITCH_3_MASK | BSP_SWITCH_4_MASK) + +// D52DK1 does not have UART peripheral. Dummy defines for compilation. +#define RX_PIN_NUMBER UART_PIN_DISCONNECTED +#define TX_PIN_NUMBER UART_PIN_DISCONNECTED +#define CTS_PIN_NUMBER UART_PIN_DISCONNECTED +#define RTS_PIN_NUMBER UART_PIN_DISCONNECTED + +// serialization CONNECTIVITY board +#define SER_CON_RX_PIN 22 // UART RX pin number. +#define SER_CON_TX_PIN 23 // UART TX pin number. +#define SER_CON_CTS_PIN 25 // UART Clear To Send pin number. Not used if HWFC is set to false. +#define SER_CON_RTS_PIN 2 // UART Request To Send pin number. Not used if HWFC is set to false. + +// serialization APPLICATION board - temp. setup for running serialized MEMU tests +#define SER_APP_RX_PIN 23 // UART RX pin number. +#define SER_APP_TX_PIN 22 // UART TX pin number. +#define SER_APP_CTS_PIN 2 // UART Clear To Send pin number. +#define SER_APP_RTS_PIN 25 // UART Request To Send pin number. + + +#define SER_CONN_CHIP_RESET_PIN 11 // Pin used to reset connectivity chip + +#ifdef __cplusplus +} +#endif + +#endif |