diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/nrf6310.h')
-rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/nrf6310.h | 180 |
1 files changed, 180 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/nrf6310.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/nrf6310.h new file mode 100644 index 0000000..b42e77e --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/boards/nrf6310.h @@ -0,0 +1,180 @@ +/** + * Copyright (c) 2012 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#ifndef NRF6310_H__ +#define NRF6310_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +#define LED_START 8 +#define LED_0 8 +#define LED_1 9 +#define LED_2 10 +#define LED_3 11 +#define LED_4 12 +#define LED_5 13 +#define LED_6 14 +#define LED_7 15 +#define LED_STOP 15 + +#define BSP_LED_0 LED_0 +#define BSP_LED_1 LED_1 +#define BSP_LED_2 LED_2 +#define BSP_LED_3 LED_3 +#define BSP_LED_4 LED_4 +#define BSP_LED_5 LED_5 +#define BSP_LED_6 LED_6 +#define BSP_LED_7 LED_7 + +#define LEDS_ACTIVE_STATE 1 + +#define BUTTON_START 0 +#define BUTTON_0 0 +#define BUTTON_1 1 +#define BUTTON_2 2 +#define BUTTON_3 3 +#define BUTTON_4 4 +#define BUTTON_5 5 +#define BUTTON_6 6 +#define BUTTON_7 7 +#define BUTTON_STOP 7 +#define BUTTON_PULL NRF_GPIO_PIN_NOPULL + +#define BSP_BUTTON_0 BUTTON_0 +#define BSP_BUTTON_1 BUTTON_1 +#define BSP_BUTTON_2 BUTTON_2 +#define BSP_BUTTON_3 BUTTON_3 +#define BSP_BUTTON_4 BUTTON_4 +#define BSP_BUTTON_5 BUTTON_5 +#define BSP_BUTTON_6 BUTTON_6 +#define BSP_BUTTON_7 BUTTON_7 + +#define BUTTONS_ACTIVE_STATE 1 + +#define BUTTONS_LIST {BUTTON_0, BUTTON_1, BUTTON_2, BUTTON_3, BUTTON_4, BUTTON_5, BUTTON_6, BUTTON_7} +#define LEDS_LIST {LED_0, LED_1, LED_2, LED_3, LED_4, LED_5, LED_6, LED_7} + +#define LEDS_INV_MASK 0x00000000 + +#define BUTTONS_NUMBER 8 +#define LEDS_NUMBER 8 + +#define RX_PIN_NUMBER 16 // UART RX pin number. +#define TX_PIN_NUMBER 17 // UART TX pin number. +#define CTS_PIN_NUMBER 18 // UART Clear To Send pin number. Not used if HWFC is set to false. +#define RTS_PIN_NUMBER 19 // UART Request To Send pin number. Not used if HWFC is set to false. +#define HWFC false // UART hardware flow control. + +#define SPIS_MISO_PIN 20 // SPI MISO signal. +#define SPIS_CSN_PIN 21 // SPI CSN signal. +#define SPIS_MOSI_PIN 22 // SPI MOSI signal. +#define SPIS_SCK_PIN 23 // SPI SCK signal. + +#define SPIM0_SCK_PIN 23u /**< SPI clock GPIO pin number. */ +#define SPIM0_MOSI_PIN 20u /**< SPI Master Out Slave In GPIO pin number. */ +#define SPIM0_MISO_PIN 22u /**< SPI Master In Slave Out GPIO pin number. */ +#define SPIM0_SS_PIN 21u /**< SPI Slave Select GPIO pin number. */ + +#define SPIM1_SCK_PIN 16u /**< SPI clock GPIO pin number. */ +#define SPIM1_MOSI_PIN 18u /**< SPI Master Out Slave In GPIO pin number. */ +#define SPIM1_MISO_PIN 17u /**< SPI Master In Slave Out GPIO pin number. */ +#define SPIM1_SS_PIN 19u /**< SPI Slave Select GPIO pin number. */ + +// serialization APPLICATION board +#define SER_APP_RX_PIN 16 // UART RX pin number. +#define SER_APP_TX_PIN 17 // UART TX pin number. +#define SER_APP_CTS_PIN 18 // UART Clear To Send pin number. +#define SER_APP_RTS_PIN 19 // UART Request To Send pin number. + +#if 0 +#define SER_APP_SPIM0_SCK_PIN 20 // SPI clock GPIO pin number. +#define SER_APP_SPIM0_MOSI_PIN 17 // SPI Master Out Slave In GPIO pin number +#define SER_APP_SPIM0_MISO_PIN 16 // SPI Master In Slave Out GPIO pin number +#define SER_APP_SPIM0_SS_PIN 21 // SPI Slave Select GPIO pin number +#define SER_APP_SPIM0_RDY_PIN 19 // SPI READY GPIO pin number +#define SER_APP_SPIM0_REQ_PIN 18 // SPI REQUEST GPIO pin number +#else +#define SER_APP_SPIM0_SCK_PIN 23 // SPI clock GPIO pin number. +#define SER_APP_SPIM0_MOSI_PIN 20 // SPI Master Out Slave In GPIO pin number +#define SER_APP_SPIM0_MISO_PIN 22 // SPI Master In Slave Out GPIO pin number +#define SER_APP_SPIM0_SS_PIN 21 // SPI Slave Select GPIO pin number +#define SER_APP_SPIM0_RDY_PIN 29 // SPI READY GPIO pin number +#define SER_APP_SPIM0_REQ_PIN 28 // SPI REQUEST GPIO pin number + +#endif + +// serialization CONNECTIVITY board +#if 0 +#define SER_CON_RX_PIN 17 // UART RX pin number. +#define SER_CON_TX_PIN 16 // UART TX pin number. +#define SER_CON_CTS_PIN 19 // UART Clear To Send pin number. Not used if HWFC is set to false. +#define SER_CON_RTS_PIN 18 // UART Request To Send pin number. Not used if HWFC is set to false. +#else +#define SER_CON_RX_PIN 16 // UART RX pin number. +#define SER_CON_TX_PIN 17 // UART TX pin number. +#define SER_CON_CTS_PIN 18 // UART Clear To Send pin number. Not used if HWFC is set to false. +#define SER_CON_RTS_PIN 19 // UART Request To Send pin number. Not used if HWFC is set to false. +#endif + +#if 0 +#define SER_CON_SPIS_SCK_PIN 20 // SPI SCK signal. +#define SER_CON_SPIS_MISO_PIN 16 // SPI MISO signal. +#define SER_CON_SPIS_MOSI_PIN 17 // SPI MOSI signal. +#define SER_CON_SPIS_CSN_PIN 21 // SPI CSN signal. +#define SER_CON_SPIS_RDY_PIN 19 // SPI READY GPIO pin number. +#define SER_CON_SPIS_REQ_PIN 18 // SPI REQUEST GPIO pin number. +#else +#define SER_CON_SPIS_SCK_PIN 23 // SPI SCK signal. +#define SER_CON_SPIS_MOSI_PIN 22 // SPI MOSI signal. +#define SER_CON_SPIS_MISO_PIN 20 // SPI MISO signal. +#define SER_CON_SPIS_CSN_PIN 21 // SPI CSN signal. +#define SER_CON_SPIS_RDY_PIN 29 // SPI READY GPIO pin number. +#define SER_CON_SPIS_REQ_PIN 28 // SPI REQUEST GPIO pin number. +#endif + +#define SER_CONN_ASSERT_LED_PIN LED_2 + + +#ifdef __cplusplus +} +#endif + +#endif // NRF6310_H__ |