diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/components/iot/coap/coap_transport.h')
-rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/components/iot/coap/coap_transport.h | 165 |
1 files changed, 165 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/iot/coap/coap_transport.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/iot/coap/coap_transport.h new file mode 100644 index 0000000..b9fd597 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/iot/coap/coap_transport.h @@ -0,0 +1,165 @@ +/** + * Copyright (c) 2014 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +/** @file coap_transport.h + * + * @defgroup iot_sdk_coap_transport CoAP transport abstraction + * @ingroup iot_sdk_coap + * @{ + * @brief The transport interface that the CoAP depends on for sending and receiving CoAP messages. + * + * @details While the interface is well defined and should not be altered, the implementation of the + * interface depends on the choice of IP stack. The only exception to this is the + * \ref coap_transport_read API. This API is implemented in the CoAP, and the transport layer is + * expected to call this function when data is received on one of the CoAP ports. + */ + +#ifndef COAP_TRANSPORT_H__ +#define COAP_TRANSPORT_H__ + +#include <stdint.h> +#include <nrf_tls.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/**@brief Port identification information. */ +typedef struct +{ + uint16_t port_number; /**< Port number. */ +} coap_port_t; + + +/**@brief Remote endpoint. */ +typedef struct +{ + uint8_t addr[16]; /**< Address of the remote device. */ + uint16_t port_number; /**< Remote port number. */ +} coap_remote_t; + + +/**@brief Transport initialization information. */ +typedef struct +{ + coap_port_t * p_port_table; /**< Information about the ports being registered. Count is assumed to be COAP_PORT_COUNT. */ + void * p_arg; /**< Public. Miscellaneous pointer to application provided data that should be passed to the transport. */ +} coap_transport_init_t; + + + +/**@brief Initializes the transport layer to have the data ports set up for CoAP. + * + * @param[in] p_param Port count and port numbers. + * + * @retval NRF_SUCCESS If initialization was successful. Otherwise, an error code that indicates the reason for the failure is returned. + */ +uint32_t coap_transport_init (const coap_transport_init_t * p_param); + + +/**@brief Sends data on a CoAP endpoint or port. + * + * @param[in] p_port Port on which the data is to be sent. + * @param[in] p_remote Remote endpoint to which the data is targeted. + * @param[in] p_data Pointer to the data to be sent. + * @param[in] datalen Length of the data to be sent. + * + * @retval NRF_SUCCESS If the data was sent successfully. Otherwise, an error code that indicates the reason for the failure is returned. + */ +uint32_t coap_transport_write(const coap_port_t * p_port, + const coap_remote_t * p_remote, + const uint8_t * p_data, + uint16_t datalen); + + + +/**@brief Handles data received on a CoAP endpoint or port. + * + * This API is not implemented by the transport layer, but assumed to exist. This approach + * avoids unnecessary registering of callback and remembering it in the transport layer. + * + * @param[in] p_port Port on which the data is received. + * @param[in] p_remote Remote endpoint from which the data is received. + * @param[in] p_local Local endpoint on which the data is received. + * @param[in] result Indicates if the data was processed successfully by lower layers. + * Possible failures could be NRF_SUCCESS, + * UDP_BAD_CHECKSUM, + * UDP_TRUNCATED_PACKET, or + * UDP_MALFORMED_PACKET. + * @param[in] p_data Pointer to the data received. + * @param[in] datalen Length of the data received. + * + * @retval NRF_SUCCESS If the data was handled successfully. Otherwise, an error code that indicates the reason for the failure is returned. + * + */ +uint32_t coap_transport_read(const coap_port_t * p_port, + const coap_remote_t * p_remote, + const coap_remote_t * p_local, + uint32_t result, + const uint8_t * p_data, + uint16_t datalen); + + +/**@brief Process loop to handle DTLS processing. + * + * @details The function handles any processing of encrypted packets. + * Some encryption libraries requires to be run in a processing + * loop. This function is called by the CoAP library everytime + * \ref coap_time_tick is issued from the library user. Any other process + * specific routines that should be done regularly could be added in + * this function. + */ +void coap_transport_process(void); + +/**@brief Process loop when using coap BSD socket transport implementation. + * + * @details This is blocking call. The function unblock is only + * triggered upon an socket event registered to select() by coap transport. + * This function must be called as often as possible in order to dispatch incomming + * socket events. Preferred to be put in the application's main loop or similar. + */ +void coap_transport_input(void); + +#ifdef __cplusplus +} +#endif + +#endif //COAP_TRANSPORT_H__ + +/** @} */ |