diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/components/iot/coap/coap_transport_lwip.c')
-rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/components/iot/coap/coap_transport_lwip.c | 255 |
1 files changed, 255 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/iot/coap/coap_transport_lwip.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/iot/coap/coap_transport_lwip.c new file mode 100644 index 0000000..6245a97 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/iot/coap/coap_transport_lwip.c @@ -0,0 +1,255 @@ +/** + * Copyright (c) 2014 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#include <stdint.h> +#include "sdk_errors.h" +#include "sdk_config.h" +#include "iot_common.h" +#include "coap_transport.h" +#include "coap.h" +#include "lwip/ip6_addr.h" +/*lint -save -e607 Suppress warning 607 "Parameter p of macro found within string" */ +#include "lwip/udp.h" +/*lint -restore */ + + +/**@brief UDP port information. */ +typedef struct +{ + struct udp_pcb * p_socket; /**< Socket information provided by UDP. */ + uint16_t port_number; /**< Associated port number. */ +}udp_port_t; + +static udp_port_t m_port_table[COAP_PORT_COUNT]; /**< Table maintaining association between CoAP ports and corresponding UDP socket identifiers. */ + + +/**@brief Callback handler to receive data on the UDP port. + * + * @details Callback handler to receive data on the UDP port. + * + * @param[in] p_arg Receive argument associated with the UDP socket. + * @param[in] p_socket Socket identifier. + * @param[in] p_ip_header IPv6 header containing source and destination addresses. + * @param[in] p_remote_addr IPv6 address of the remote device. + * @param[in] port Port number identifying the remote endpoint. + * + * @retval NRF_SUCCESS Indicates received data was handled successfully, else an an + * error code indicating reason for failure. + */ +static void udp_recv_data_handler(void * p_arg, + struct udp_pcb * p_socket, + struct pbuf * p_buffer, + const ip6_addr_t * p_remote_addr, + u16_t port) +{ + uint32_t index; + coap_remote_t remote_endpoint; + coap_port_t local_port = {p_socket->local_port}; + + for (index = 0; index < COAP_PORT_COUNT; index++) + { + if (m_port_table[index].p_socket == p_socket) + { + memcpy (remote_endpoint.addr, p_remote_addr, 16); + remote_endpoint.port_number = port; + + COAP_MUTEX_LOCK(); + + UNUSED_VARIABLE(coap_transport_read(&local_port, + &remote_endpoint, + NULL, + NRF_SUCCESS, + (uint8_t *)p_buffer->payload, + (uint32_t)p_buffer->len)); + + COAP_MUTEX_UNLOCK(); + + break; + } + } + + //Freeing packet (irrespective of matching p_socket is found or not + //to avoid memory leaks in the system. + UNUSED_VARIABLE(pbuf_free(p_buffer)); +} + + +/**@brief Creates port as requested in p_port. + * + * @details Creates port as requested in p_port. + * + * @param[in] index Index to the m_port_table where entry of the port created is to be made. + * @param[in] p_port Port information to be created. + * + * @retval NRF_SUCCESS Indicates if port was created successfully, else an an error code + * indicating reason for failure. + */ +static uint32_t port_create(uint32_t index, coap_port_t * p_port) +{ + err_t err = NRF_ERROR_NO_MEM; + ip6_addr_t any_addr; + struct udp_pcb * p_socket = m_port_table[index].p_socket; + + ip6_addr_set_any(&any_addr); + + //Request new socket creation. + p_socket = udp_new(); + + if (NULL != p_socket) + { + // Bind the socket to the local port. + err = udp_bind(p_socket, &any_addr, p_port->port_number); + if (err == ERR_OK) + { + //Register data receive callback. + udp_recv(p_socket, udp_recv_data_handler, &m_port_table[index]); + //All procedure with respect to port creation succeeded, make entry in the table. + m_port_table[index].port_number = p_port->port_number; + m_port_table[index].p_socket = p_socket; + } + else + { + //Not all procedures succeeded with allocated socket, hence free it. + err = NRF_ERROR_INVALID_PARAM; + udp_remove(p_socket); + } + } + + return err; +} + + +uint32_t coap_transport_init(const coap_transport_init_t * p_param) +{ + uint32_t err_code = NRF_SUCCESS; + uint32_t index; + + NULL_PARAM_CHECK(p_param); + NULL_PARAM_CHECK(p_param->p_port_table); + + for (index = 0; index < COAP_PORT_COUNT; index++) + { + // Create end point for each of the COAP ports. + err_code = port_create(index, &p_param->p_port_table[index]); + if (err_code != NRF_SUCCESS) + { + break; + } + } + + return err_code; +} + + +uint32_t coap_transport_write(const coap_port_t * p_port, + const coap_remote_t * p_remote, + const uint8_t * p_data, + uint16_t datalen) +{ + + err_t err = NRF_ERROR_NOT_FOUND; + uint32_t index; + + NULL_PARAM_CHECK(p_port); + NULL_PARAM_CHECK(p_remote); + NULL_PARAM_CHECK(p_data); + + //Search for the corresponding port. + for (index = 0; index < COAP_PORT_COUNT; index++) + { + if (m_port_table[index].port_number == p_port->port_number) + { + //Allocate Buffer to send the data on port. + struct pbuf * lwip_buffer = pbuf_alloc(PBUF_TRANSPORT, datalen, PBUF_RAM); + + if (NULL != lwip_buffer) + { + //Make a copy of the data onto the buffer. + memcpy(lwip_buffer->payload, p_data, datalen); + + COAP_MUTEX_UNLOCK(); + + //Send on UDP port. + err = udp_sendto(m_port_table[index].p_socket, + lwip_buffer, + (ip6_addr_t *)p_remote->addr, + p_remote->port_number); + + COAP_MUTEX_LOCK(); + + + if (err != ERR_OK) + { + //Free the allocated buffer as send procedure has failed. + err = NRF_ERROR_INTERNAL; + } + UNUSED_VARIABLE(pbuf_free(lwip_buffer)); + } + else + { + //Buffer allocation failed, cannot send data. + err = NRF_ERROR_NO_MEM; + } + break; + } + } + return err; +} + + +void coap_transport_process(void) +{ + return; +} + + +uint32_t coap_security_setup(uint16_t local_port, + nrf_tls_role_t role, + coap_remote_t * const p_remote, + nrf_tls_key_settings_t * const p_settings) +{ + return NRF_ERROR_API_NOT_IMPLEMENTED; +} + + +uint32_t coap_security_destroy(uint16_t local_port, + coap_remote_t * const p_remote) +{ + return NRF_ERROR_API_NOT_IMPLEMENTED; +} |