diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/components/serialization/application/codecs/ble/middleware/app_mw_ble_gap.c')
-rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/components/serialization/application/codecs/ble/middleware/app_mw_ble_gap.c | 2025 |
1 files changed, 2025 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/serialization/application/codecs/ble/middleware/app_mw_ble_gap.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/serialization/application/codecs/ble/middleware/app_mw_ble_gap.c new file mode 100644 index 0000000..55cc2fa --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/serialization/application/codecs/ble/middleware/app_mw_ble_gap.c @@ -0,0 +1,2025 @@ +/** + * Copyright (c) 2014 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#include "ble_gap.h" +#include <stdint.h> +#include <string.h> +#include "ble_serialization.h" +#include "ser_sd_transport.h" +#include "ble_gap_app.h" +#include "app_error.h" +#include "app_ble_gap_sec_keys.h" +#include "ser_config.h" + +extern ser_ble_gap_app_keyset_t m_app_keys_table[SER_MAX_CONNECTIONS]; + +/**@brief Structure containing @ref sd_ble_gap_device_name_get output parameters. */ +typedef struct +{ + uint8_t * p_dev_name; /**< @ref sd_ble_gap_device_name_get p_dev_name output parameter. */ + uint16_t * p_len; /**< @ref sd_ble_gap_device_name_get p_len output parameter. */ +} gap_device_name_get_output_params_t; + +/**@brief Structure containing @ref sd_ble_gap_appearance_get output parameters. */ +typedef struct +{ + uint16_t * p_appearance; /**< @ref sd_ble_gap_appearance_get p_appearance output parameter. */ +} gap_appearance_get_output_params_t; + +/**@brief Structure containing @ref sd_ble_gap_ppcp_get output parameters. */ +typedef struct +{ + ble_gap_conn_params_t * p_conn_params; /**< @ref sd_ble_gap_ppcp_get p_conn_params output parameter. */ +} gap_ppcp_get_out_params_t; + +/**@brief Structure containing @ref sd_ble_gap_sec_params_reply output parameters. */ +typedef struct +{ + ble_gap_sec_keyset_t const * p_sec_keyset; /**< @ref sd_ble_gap_sec_params_reply p_sec_keyset output parameter. */ + uint16_t conn_handle; /**< @ref sd_ble_gap_sec_params_reply p_conn_handle output parameter. */ +} gap_sec_params_reply_out_params_t; + +/**@brief Union containing BLE command output parameters. */ +typedef union +{ + gap_device_name_get_output_params_t gap_device_name_get_out_params; /**< @ref sd_ble_gap_device_name_get output parameters. */ + gap_appearance_get_output_params_t gap_appearance_get_out_params; /**< @ref sd_ble_gap_appearance_get output parameters. */ + gap_ppcp_get_out_params_t gap_ppcp_get_out_params; /**< @ref sd_ble_gap_ppcp_get output parameters. */ + gap_sec_params_reply_out_params_t gap_sec_params_reply_out_params;/**< @ref sd_ble_sec_params_reply output parameters. */ +} gap_command_output_params_t; + +static gap_command_output_params_t m_output_params; /**< BLE command output parameters. */ + +static void * mp_out_params[3]; + +static void tx_buf_alloc(uint8_t * * p_data, uint16_t * p_len) +{ + uint32_t err_code; + + do + { + err_code = ser_sd_transport_tx_alloc(p_data, p_len); + } + while (err_code != NRF_SUCCESS); + *p_data[0] = SER_PKT_TYPE_CMD; + *p_len -= 1; +} + +/**@brief Command response callback function for @ref sd_ble_gap_adv_start BLE command. + * + * Callback for decoding the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_adv_start_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code; + + const uint32_t err_code = ble_gap_adv_start_rsp_dec(p_buffer, length, &result_code); + + APP_ERROR_CHECK(err_code); + + return result_code; +} + +#ifndef _sd_ble_gap_adv_start +#define _sd_ble_gap_adv_start sd_ble_gap_adv_start +#endif +uint32_t _sd_ble_gap_adv_start( +#if NRF_SD_BLE_API_VERSION > 5 + uint8_t adv_handle +#else + ble_gap_adv_params_t const * const p_adv_params +#endif +#if NRF_SD_BLE_API_VERSION >= 4 + ,uint8_t conn_cfg_tag +#endif +) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + + const uint32_t err_code = ble_gap_adv_start_req_enc( +#if NRF_SD_BLE_API_VERSION > 5 + adv_handle, +#else + p_adv_params, +#endif +#if NRF_SD_BLE_API_VERSION >= 4 + conn_cfg_tag, +#endif + &(p_buffer[1]), + &buffer_length); + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_adv_start_rsp_dec); +} + +/**@brief Command response callback function for @ref ble_gap_device_name_get_req_enc BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_device_name_get_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code; + + const uint32_t err_code = + ble_gap_device_name_get_rsp_dec(p_buffer, + length, + m_output_params.gap_device_name_get_out_params.p_dev_name, + m_output_params.gap_device_name_get_out_params.p_len, + &result_code); + + APP_ERROR_CHECK(err_code); + + return result_code; +} + +#ifndef _sd_ble_gap_device_name_get +#define _sd_ble_gap_device_name_get sd_ble_gap_device_name_get +#endif +uint32_t _sd_ble_gap_device_name_get(uint8_t * const p_dev_name, uint16_t * const p_len) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + m_output_params.gap_device_name_get_out_params.p_dev_name = p_dev_name; + m_output_params.gap_device_name_get_out_params.p_len = p_len; + + const uint32_t err_code = ble_gap_device_name_get_req_enc(p_dev_name, + p_len, + &(p_buffer[1]), + &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_device_name_get_rsp_dec); +} + + +/**@brief Command response callback function for @ref sd_ble_gap_appearance_get BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_appearance_get_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code; + + const uint32_t err_code = + ble_gap_appearance_get_rsp_dec(p_buffer, + length, + m_output_params.gap_appearance_get_out_params.p_appearance, + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + return result_code; +} + +#ifndef _sd_ble_gap_appearance_get +#define _sd_ble_gap_appearance_get sd_ble_gap_appearance_get +#endif +uint32_t _sd_ble_gap_appearance_get(uint16_t * const p_appearance) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + m_output_params.gap_appearance_get_out_params.p_appearance = p_appearance; + + const uint32_t err_code = ble_gap_appearance_get_req_enc(p_appearance, + &(p_buffer[1]), + &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_appearance_get_rsp_dec); +} + + +/**@brief Command response callback function for @ref sd_ble_gap_device_name_set BLE command. + * + * Callback for decoding the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_device_name_set_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code; + + const uint32_t err_code = ble_gap_device_name_set_rsp_dec(p_buffer, length, &result_code); + + APP_ERROR_CHECK(err_code); + + return result_code; +} + +#ifndef _sd_ble_gap_device_name_set +#define _sd_ble_gap_device_name_set sd_ble_gap_device_name_set +#endif +uint32_t _sd_ble_gap_device_name_set(ble_gap_conn_sec_mode_t const * const p_write_perm, + uint8_t const * const p_dev_name, + uint16_t len) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + const uint32_t err_code = ble_gap_device_name_set_req_enc(p_write_perm, + p_dev_name, + len, + &(p_buffer[1]), + &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_device_name_set_rsp_dec); +} + + +/**@brief Command response callback function for @ref sd_ble_gap_appearance_set BLE command. + * + * Callback for decoding the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_appearance_set_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code; + + const uint32_t err_code = ble_gap_appearance_set_rsp_dec(p_buffer, length, &result_code); + + APP_ERROR_CHECK(err_code); + + return result_code; +} + +#ifndef _sd_ble_gap_appearance_set +#define _sd_ble_gap_appearance_set sd_ble_gap_appearance_set +#endif +uint32_t _sd_ble_gap_appearance_set(uint16_t appearance) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + const uint32_t err_code = ble_gap_appearance_set_req_enc(appearance, + &(p_buffer[1]), + &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_appearance_set_rsp_dec); +} + + +/**@brief Command response callback function for @ref sd_ble_gap_ppcp_set BLE command. + * + * Callback for decoding the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_ppcp_set_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code; + + const uint32_t err_code = ble_gap_ppcp_set_rsp_dec(p_buffer, length, &result_code); + + APP_ERROR_CHECK(err_code); + + + return result_code; +} + +#ifndef _sd_ble_gap_ppcp_set +#define _sd_ble_gap_ppcp_set sd_ble_gap_ppcp_set +#endif +uint32_t _sd_ble_gap_ppcp_set(ble_gap_conn_params_t const * const p_conn_params) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + const uint32_t err_code = ble_gap_ppcp_set_req_enc(p_conn_params, + &(p_buffer[1]), + &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_ppcp_set_rsp_dec); +} + + +/**@brief Command response callback function for @ref sd_ble_gap_adv_data_set BLE command. + * + * Callback for decoding the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +#if NRF_SD_BLE_API_VERSION <= 5 +static uint32_t gap_adv_data_set_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code; + + const uint32_t err_code = ble_gap_adv_data_set_rsp_dec(p_buffer, length, &result_code); + + APP_ERROR_CHECK(err_code); + + return result_code; +} +#ifndef _sd_ble_gap_adv_data_set +#define _sd_ble_gap_adv_data_set sd_ble_gap_adv_data_set +#endif +uint32_t _sd_ble_gap_adv_data_set(uint8_t const * const p_data, + uint8_t dlen, + uint8_t const * const p_sr_data, + uint8_t srdlen) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + const uint32_t err_code = ble_gap_adv_data_set_req_enc(p_data, + dlen, + p_sr_data, + srdlen, + &(p_buffer[1]), + &buffer_length); + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_adv_data_set_rsp_dec); +} +#endif + +/**@brief Command response callback function for @ref sd_ble_gap_conn_param_update BLE command. + * + * Callback for decoding the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_conn_param_update_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code; + + const uint32_t err_code = ble_gap_conn_param_update_rsp_dec(p_buffer, length, &result_code); + + APP_ERROR_CHECK(err_code); + + return result_code; +} + +#ifndef _sd_ble_gap_conn_param_update +#define _sd_ble_gap_conn_param_update sd_ble_gap_conn_param_update +#endif +uint32_t _sd_ble_gap_conn_param_update(uint16_t conn_handle, + ble_gap_conn_params_t const * const p_conn_params) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + const uint32_t err_code = ble_gap_conn_param_update_req_enc(conn_handle, + p_conn_params, + &(p_buffer[1]), + &buffer_length); + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_conn_param_update_rsp_dec); +} + + +/**@brief Command response callback function for @ref sd_ble_gap_disconnect BLE command. + * + * Callback for decoding the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_disconnect_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code; + + const uint32_t err_code = ble_gap_disconnect_rsp_dec(p_buffer, length, &result_code); + + APP_ERROR_CHECK(err_code); + + return result_code; +} + +#ifndef _sd_ble_gap_disconnect +#define _sd_ble_gap_disconnect sd_ble_gap_disconnect +#endif +uint32_t _sd_ble_gap_disconnect(uint16_t conn_handle, uint8_t hci_status_code) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + const uint32_t err_code = ble_gap_disconnect_req_enc(conn_handle, + hci_status_code, + &(p_buffer[1]), + &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_disconnect_rsp_dec); +} + + +/**@brief Command response callback function for @ref sd_ble_gap_sec_info_reply BLE command. + * + * Callback for decoding the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_sec_info_reply_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code; + + const uint32_t err_code = ble_gap_sec_info_reply_rsp_dec(p_buffer, length, &result_code); + + APP_ERROR_CHECK(err_code); + + return result_code; +} + +#ifndef _sd_ble_gap_sec_info_reply +#define _sd_ble_gap_sec_info_reply sd_ble_gap_sec_info_reply +#endif +uint32_t _sd_ble_gap_sec_info_reply(uint16_t conn_handle, + ble_gap_enc_info_t const * p_enc_info, + ble_gap_irk_t const * p_id_info, + ble_gap_sign_info_t const * p_sign_info) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + const uint32_t err_code = ble_gap_sec_info_reply_req_enc(conn_handle, + p_enc_info, + p_id_info, + p_sign_info, + &(p_buffer[1]), + &buffer_length); + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_sec_info_reply_rsp_dec); +} + + +/**@brief Command response callback function for @ref sd_ble_gap_sec_params_reply BLE command. + * + * Callback for decoding the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_sec_params_reply_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + uint32_t err_code = ble_gap_sec_params_reply_rsp_dec(p_buffer, length, + m_output_params.gap_sec_params_reply_out_params.p_sec_keyset, &result_code); + APP_ERROR_CHECK(err_code); + + // If soft device returned error free security context + if (result_code) + { + err_code = app_ble_gap_sec_context_destroy(m_output_params.gap_sec_params_reply_out_params.conn_handle); + SER_ASSERT(err_code == NRF_SUCCESS, err_code); + } + + return result_code; +} + +#ifndef _sd_ble_gap_sec_params_reply +#define _sd_ble_gap_sec_params_reply sd_ble_gap_sec_params_reply +#endif +uint32_t _sd_ble_gap_sec_params_reply(uint16_t conn_handle, + uint8_t sec_status, + ble_gap_sec_params_t const * p_sec_params, + ble_gap_sec_keyset_t const * p_sec_keyset) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + uint32_t sec_tab_index = 0; + uint32_t err_code = NRF_SUCCESS; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + m_output_params.gap_sec_params_reply_out_params.p_sec_keyset = p_sec_keyset; + m_output_params.gap_sec_params_reply_out_params.conn_handle = conn_handle; + + // First allocate security context for serialization + if (p_sec_keyset) + { + err_code = app_ble_gap_sec_context_create(conn_handle, &sec_tab_index); + SER_ASSERT(err_code == NRF_SUCCESS, err_code); + memcpy(&(m_app_keys_table[sec_tab_index].keyset), p_sec_keyset, sizeof(ble_gap_sec_keyset_t)); + } + + err_code = ble_gap_sec_params_reply_req_enc(conn_handle, + sec_status, + p_sec_params, + p_sec_keyset, + &(p_buffer[1]), + &buffer_length); + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_sec_params_reply_rsp_dec); +} + + +/**@brief Command response callback function for @ref sd_ble_gap_ppcp_get BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_ppcp_get_reply_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_ppcp_get_rsp_dec( + p_buffer, + length, + m_output_params.gap_ppcp_get_out_params. + p_conn_params, + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + return result_code; +} + +#ifndef _sd_ble_gap_ppcp_get +#define _sd_ble_gap_ppcp_get sd_ble_gap_ppcp_get +#endif +uint32_t _sd_ble_gap_ppcp_get(ble_gap_conn_params_t * const p_conn_params) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + m_output_params.gap_ppcp_get_out_params.p_conn_params = p_conn_params; + + const uint32_t err_code = ble_gap_ppcp_get_req_enc(p_conn_params, + &(p_buffer[1]), + &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_ppcp_get_reply_rsp_dec); +} + + +/**@brief Command response callback function for @ref sd_ble_gap_adv_stop BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_adv_stop_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_adv_stop_rsp_dec(p_buffer, + length, + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + return result_code; +} + +#ifndef _sd_ble_gap_adv_stop +#define _sd_ble_gap_adv_stop sd_ble_gap_adv_stop +#endif +uint32_t _sd_ble_gap_adv_stop( +#if NRF_SD_BLE_API_VERSION > 5 + uint8_t adv_handle +#else + void +#endif + ) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + const uint32_t err_code = ble_gap_adv_stop_req_enc( +#if NRF_SD_BLE_API_VERSION > 5 + adv_handle, +#endif + &(p_buffer[1]), + &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_adv_stop_rsp_dec); +} + +/**@brief Command response callback function for @ref sd_ble_gap_auth_key_reply BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_auth_key_reply_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_auth_key_reply_rsp_dec(p_buffer, + length, + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + + + return result_code; +} + + +#ifndef _sd_ble_gap_auth_key_reply +#define _sd_ble_gap_auth_key_reply sd_ble_gap_auth_key_reply +#endif +uint32_t _sd_ble_gap_auth_key_reply(uint16_t conn_handle, + uint8_t key_type, + uint8_t const * const key) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + const uint32_t err_code = ble_gap_auth_key_reply_req_enc(conn_handle, key_type, key, + &(p_buffer[1]), &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_auth_key_reply_rsp_dec); +} + +/**@brief Command response callback function for @ref sd_ble_gap_authenticate BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_authenticate_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_authenticate_rsp_dec(p_buffer, + length, + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + + + return result_code; +} + +#ifndef _sd_ble_gap_authenticate +#define _sd_ble_gap_authenticate sd_ble_gap_authenticate +#endif +uint32_t _sd_ble_gap_authenticate(uint16_t conn_handle, + ble_gap_sec_params_t const * const p_sec_params) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + const uint32_t err_code = ble_gap_authenticate_req_enc(conn_handle, p_sec_params, + &(p_buffer[1]), &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_authenticate_rsp_dec); +} + +/**@brief Command response callback function for @ref sd_ble_gap_conn_sec_get BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_conn_sec_get_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_conn_sec_get_rsp_dec( + p_buffer, + length, + (ble_gap_conn_sec_t * *)&mp_out_params[0 + ], + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + + + return result_code; +} + +#ifndef _sd_ble_gap_conn_sec_get +#define _sd_ble_gap_conn_sec_get sd_ble_gap_conn_sec_get +#endif +uint32_t _sd_ble_gap_conn_sec_get(uint16_t conn_handle, ble_gap_conn_sec_t * const p_conn_sec) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + mp_out_params[0] = p_conn_sec; + + const uint32_t err_code = ble_gap_conn_sec_get_req_enc(conn_handle, p_conn_sec, + &(p_buffer[1]), &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_conn_sec_get_rsp_dec); +} + +/**@brief Command response callback function for @ref sd_ble_gap_rssi_start BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_rssi_start_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_rssi_start_rsp_dec(p_buffer, + length, + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + + + return result_code; +} + +#ifndef _sd_ble_gap_rssi_start +#define _sd_ble_gap_rssi_start sd_ble_gap_rssi_start +#endif +uint32_t _sd_ble_gap_rssi_start(uint16_t conn_handle, uint8_t threshold_dbm, uint8_t skip_count) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + const uint32_t err_code = ble_gap_rssi_start_req_enc(conn_handle, + threshold_dbm, + skip_count, + &(p_buffer[1]), &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_rssi_start_rsp_dec); +} + +/**@brief Command response callback function for @ref sd_ble_gap_rssi_stop BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_rssi_stop_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_rssi_stop_rsp_dec(p_buffer, + length, + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + + + return result_code; +} + +#ifndef _sd_ble_gap_rssi_stop +#define _sd_ble_gap_rssi_stop sd_ble_gap_rssi_stop +#endif +uint32_t _sd_ble_gap_rssi_stop(uint16_t conn_handle) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + const uint32_t err_code = ble_gap_rssi_stop_req_enc(conn_handle, + &(p_buffer[1]), &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_rssi_stop_rsp_dec); +} + +/**@brief Command response callback function for @ref sd_ble_gap_tx_power_set BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_tx_power_set_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_tx_power_set_rsp_dec(p_buffer, + length, + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + + + return result_code; +} + +#ifndef _sd_ble_gap_tx_power_set +#define _sd_ble_gap_tx_power_set sd_ble_gap_tx_power_set +#endif +uint32_t _sd_ble_gap_tx_power_set( +#if NRF_SD_BLE_API_VERSION > 5 + uint8_t role, uint16_t handle, +#endif + int8_t tx_power) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); +#if NRF_SD_BLE_API_VERSION > 5 + const uint32_t err_code = ble_gap_tx_power_set_req_enc(role, handle, tx_power, + &(p_buffer[1]), &buffer_length); +#else + const uint32_t err_code = ble_gap_tx_power_set_req_enc(tx_power, + &(p_buffer[1]), &buffer_length); +#endif + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_tx_power_set_rsp_dec); +} + +#ifndef S112 +/**@brief Command response callback function for @ref sd_ble_gap_scan_stop BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_scan_stop_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_scan_stop_rsp_dec(p_buffer, + length, + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + + + return result_code; +} + +#ifndef _sd_ble_gap_scan_stop +#define _sd_ble_gap_scan_stop sd_ble_gap_scan_stop +#endif +uint32_t _sd_ble_gap_scan_stop(void) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + const uint32_t err_code = ble_gap_scan_stop_req_enc(&(p_buffer[1]), + &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_scan_stop_rsp_dec); +} + +/**@brief Command response callback function for @ref sd_ble_gap_connect BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_connect_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_connect_rsp_dec(p_buffer, + length, + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + + + return result_code; +} + +#ifndef _sd_ble_gap_connect +#define _sd_ble_gap_connect sd_ble_gap_connect +#endif +uint32_t _sd_ble_gap_connect(ble_gap_addr_t const * const p_addr, + ble_gap_scan_params_t const * const p_scan_params, + ble_gap_conn_params_t const * const p_conn_params +#if NRF_SD_BLE_API_VERSION >= 4 + ,uint8_t conn_cfg_tag +#endif + ) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + const uint32_t err_code = ble_gap_connect_req_enc(p_addr, + p_scan_params, + p_conn_params, +#if NRF_SD_BLE_API_VERSION >= 4 + conn_cfg_tag, +#endif + &(p_buffer[1]), + &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_connect_rsp_dec); +} + +/**@brief Command response callback function for @ref sd_ble_gap_connect_cancel BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_connect_cancel_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_connect_cancel_rsp_dec(p_buffer, + length, + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + + + return result_code; +} + +#ifndef _sd_ble_gap_connect_cancel +#define _sd_ble_gap_connect_cancel sd_ble_gap_connect_cancel +#endif +uint32_t _sd_ble_gap_connect_cancel(void) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + const uint32_t err_code = ble_gap_connect_cancel_req_enc(&(p_buffer[1]), + &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_connect_cancel_rsp_dec); +} + +/**@brief Command response callback function for @ref sd_ble_gap_scan_start BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_scan_start_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_scan_start_rsp_dec(p_buffer, + length, + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + return result_code; +} + +#ifndef _sd_ble_gap_scan_start +#define _sd_ble_gap_scan_start sd_ble_gap_scan_start +#endif +uint32_t _sd_ble_gap_scan_start(ble_gap_scan_params_t const * const p_scan_params +#if defined(NRF_SD_BLE_API_VERSION) && NRF_SD_BLE_API_VERSION > 5 + ,ble_data_t const * p_adv_report_buffer +#endif + ) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + uint32_t err_code; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); +#if defined(NRF_SD_BLE_API_VERSION) && NRF_SD_BLE_API_VERSION > 5 + if (p_adv_report_buffer) + { + err_code = app_ble_gap_scan_data_set(p_adv_report_buffer); + APP_ERROR_CHECK(err_code); + } +#endif + err_code = ble_gap_scan_start_req_enc(p_scan_params, +#if defined(NRF_SD_BLE_API_VERSION) && NRF_SD_BLE_API_VERSION > 5 + p_adv_report_buffer, +#endif + &(p_buffer[1]), + &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_scan_start_rsp_dec); +} + +/**@brief Command response callback function for @ref sd_ble_gap_encrypt BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_encrypt_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_encrypt_rsp_dec(p_buffer, + length, + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + return result_code; +} + +#ifndef _sd_ble_gap_encrypt +#define _sd_ble_gap_encrypt sd_ble_gap_encrypt +#endif +uint32_t _sd_ble_gap_encrypt( uint16_t conn_handle, + ble_gap_master_id_t const * p_master_id, + ble_gap_enc_info_t const * p_enc_info) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + const uint32_t err_code = ble_gap_encrypt_req_enc( conn_handle, p_master_id, p_enc_info, &(p_buffer[1]), &buffer_length ); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_encrypt_rsp_dec); +} +#endif //!S112 + +/**@brief Command response callback function for @ref sd_ble_gap_rssi_get BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_rssi_get_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_rssi_get_rsp_dec(p_buffer, + length, + (int8_t *) mp_out_params[0], +#if NRF_SD_BLE_API_VERSION > 5 + (uint8_t *) mp_out_params[1], +#endif + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + return result_code; +} + +#ifndef _sd_ble_gap_rssi_get +#define _sd_ble_gap_rssi_get sd_ble_gap_rssi_get +#endif +uint32_t _sd_ble_gap_rssi_get(uint16_t conn_handle, + int8_t * p_rssi +#if NRF_SD_BLE_API_VERSION > 5 + ,uint8_t * p_ch_index +#endif +) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + mp_out_params[0] = p_rssi; + +#if NRF_SD_BLE_API_VERSION > 5 + mp_out_params[1] = p_ch_index; + const uint32_t err_code = ble_gap_rssi_get_req_enc(conn_handle, p_rssi, p_ch_index, &(p_buffer[1]), &buffer_length); +#else + const uint32_t err_code = ble_gap_rssi_get_req_enc(conn_handle, p_rssi, &(p_buffer[1]), &buffer_length); +#endif + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_rssi_get_rsp_dec); +} + +/**@brief Command response callback function for @ref sd_ble_gap_keypress_notify BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_keypress_notify_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_keypress_notify_rsp_dec(p_buffer, + length, + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + return result_code; +} + +#ifndef _sd_ble_gap_keypress_notify +#define _sd_ble_gap_keypress_notify sd_ble_gap_keypress_notify +#endif +uint32_t _sd_ble_gap_keypress_notify( uint16_t conn_handle, uint8_t kp_not) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + const uint32_t err_code = ble_gap_keypress_notify_req_enc( conn_handle, kp_not, &p_buffer[1], &buffer_length ); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_keypress_notify_rsp_dec); +} + +/**@brief Command response callback function for @ref sd_ble_gap_lesc_dhkey_reply BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_lesc_dhkey_reply_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_lesc_dhkey_reply_rsp_dec(p_buffer, + length, + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + return result_code; +} + +#ifndef _sd_ble_gap_lesc_dhkey_reply +#define _sd_ble_gap_lesc_dhkey_reply sd_ble_gap_lesc_dhkey_reply +#endif +uint32_t _sd_ble_gap_lesc_dhkey_reply( uint16_t conn_handle, ble_gap_lesc_dhkey_t const *p_dhkey) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + const uint32_t err_code = ble_gap_lesc_dhkey_reply_req_enc( conn_handle, p_dhkey, &(p_buffer[1]), &buffer_length ); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_lesc_dhkey_reply_rsp_dec); +} + +/**@brief Command response callback function for @ref sd_ble_gap_lesc_oob_data_set BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_lesc_oob_data_set_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_lesc_oob_data_set_rsp_dec(p_buffer, + length, + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + return result_code; +} + +#ifndef _sd_ble_gap_lesc_oob_data_set +#define _sd_ble_gap_lesc_oob_data_set sd_ble_gap_lesc_oob_data_set +#endif +uint32_t _sd_ble_gap_lesc_oob_data_set(uint16_t conn_handle, + ble_gap_lesc_oob_data_t const *p_oobd_own, + ble_gap_lesc_oob_data_t const *p_oobd_peer) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + const uint32_t err_code = ble_gap_lesc_oob_data_set_req_enc(conn_handle, p_oobd_own, p_oobd_peer, + &(p_buffer[1]), &buffer_length ); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_lesc_oob_data_set_rsp_dec); +} + +/**@brief Command response callback function for @ref sd_ble_gap_lesc_oob_data_get BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_lesc_oob_data_get_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_lesc_oob_data_get_rsp_dec(p_buffer, + length, + (ble_gap_lesc_oob_data_t **) &mp_out_params[0], + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + return result_code; +} + +#ifndef _sd_ble_gap_lesc_oob_data_get +#define _sd_ble_gap_lesc_oob_data_get sd_ble_gap_lesc_oob_data_get +#endif +uint32_t _sd_ble_gap_lesc_oob_data_get(uint16_t conn_handle, + ble_gap_lesc_p256_pk_t const *p_pk_own, + ble_gap_lesc_oob_data_t *p_oobd_own) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + mp_out_params[0] = p_oobd_own; + const uint32_t err_code = ble_gap_lesc_oob_data_get_req_enc(conn_handle, p_pk_own, p_oobd_own, + &(p_buffer[1]), &buffer_length ); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_lesc_oob_data_get_rsp_dec); +} + +/**@brief Command response callback function for @ref sd_ble_gap_addr_get BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_addr_get_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_addr_get_rsp_dec(p_buffer, + length, + (ble_gap_addr_t *)mp_out_params[0], + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + return result_code; +} + +#ifndef _sd_ble_gap_addr_get +#define _sd_ble_gap_addr_get sd_ble_gap_addr_get +#endif +uint32_t _sd_ble_gap_addr_get(ble_gap_addr_t * const p_addr) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + mp_out_params[0] = p_addr; + + const uint32_t err_code = ble_gap_addr_get_req_enc(p_addr, + &(p_buffer[1]), + &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_addr_get_rsp_dec); +} + +/**@brief Command response callback function for @ref sd_ble_gap_addr_set BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_addr_set_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_addr_set_rsp_dec(p_buffer, + length, + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + return result_code; +} + +#ifndef _sd_ble_gap_addr_set +#define _sd_ble_gap_addr_set sd_ble_gap_addr_set +#endif +uint32_t _sd_ble_gap_addr_set(ble_gap_addr_t const * const p_addr) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + const uint32_t err_code = ble_gap_addr_set_req_enc(p_addr, + &(p_buffer[1]), + &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_addr_set_rsp_dec); +} + +/**@brief Command response callback function for @ref sd_ble_gap_privacy_set BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_privacy_set_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_privacy_set_rsp_dec(p_buffer, + length, + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + return result_code; +} + +#ifndef _sd_ble_gap_privacy_set +#define _sd_ble_gap_privacy_set sd_ble_gap_privacy_set +#endif +uint32_t _sd_ble_gap_privacy_set(ble_gap_privacy_params_t const *p_privacy_params) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + + const uint32_t err_code = ble_gap_privacy_set_req_enc(p_privacy_params, + &(p_buffer[1]), &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_privacy_set_rsp_dec); +} + +/**@brief Command response callback function for @ref sd_ble_gap_privacy_get BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_privacy_get_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_privacy_get_rsp_dec(p_buffer, + length, + (ble_gap_privacy_params_t *)mp_out_params[0], + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + return result_code; +} + +#ifndef _sd_ble_gap_privacy_get +#define _sd_ble_gap_privacy_get sd_ble_gap_privacy_get +#endif +uint32_t _sd_ble_gap_privacy_get(ble_gap_privacy_params_t *p_privacy_params) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + mp_out_params[0] = p_privacy_params; + + const uint32_t err_code = ble_gap_privacy_get_req_enc(p_privacy_params, + &(p_buffer[1]), &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_privacy_get_rsp_dec); +} + +/**@brief Command response callback function for @ref sd_ble_gap_whitelist_set BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_whitelist_set_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_whitelist_set_rsp_dec(p_buffer, + length, + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + return result_code; +} + +#ifndef _sd_ble_gap_whitelist_set +#define _sd_ble_gap_whitelist_set sd_ble_gap_whitelist_set +#endif +uint32_t _sd_ble_gap_whitelist_set(ble_gap_addr_t const * const * pp_wl_addrs, uint8_t len) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + + const uint32_t err_code = ble_gap_whitelist_set_req_enc(pp_wl_addrs, len, + &(p_buffer[1]), &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_whitelist_set_rsp_dec); +} + +/**@brief Command response callback function for @ref sd_ble_gap_device_identities_set BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_device_identities_set_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_device_identities_set_rsp_dec(p_buffer, + length, + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + return result_code; +} + +#ifndef _sd_ble_gap_device_identities_set +#define _sd_ble_gap_device_identities_set sd_ble_gap_device_identities_set +#endif +uint32_t _sd_ble_gap_device_identities_set(ble_gap_id_key_t const * const * pp_id_keys, ble_gap_irk_t const * const * pp_local_irks, uint8_t len) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + + const uint32_t err_code = ble_gap_device_identities_set_req_enc(pp_id_keys, + pp_local_irks, + len, + &(p_buffer[1]), &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_device_identities_set_rsp_dec); +} + +#if NRF_SD_BLE_API_VERSION >= 4 && !defined(S112) +/**@brief Command response callback function for @ref sd_ble_gap_data_length_update BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_data_length_update_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_data_length_update_rsp_dec(p_buffer, + length, + (ble_gap_data_length_limitation_t *)mp_out_params[0], + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + return result_code; +} + +#ifndef _sd_ble_gap_data_length_update +#define _sd_ble_gap_data_length_update sd_ble_gap_data_length_update +#endif +uint32_t _sd_ble_gap_data_length_update(uint16_t conn_handle, + ble_gap_data_length_params_t const *p_dl_params, + ble_gap_data_length_limitation_t *p_dl_limitation) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + mp_out_params[0] = p_dl_limitation; + + const uint32_t err_code = ble_gap_data_length_update_req_enc(conn_handle, p_dl_params,p_dl_limitation, + &(p_buffer[1]), &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_data_length_update_rsp_dec); +} + +#endif // NRF_SD_BLE_API_VERSION >= 4 && !defined(S112) + +#if NRF_SD_BLE_API_VERSION >= 5 +/**@brief Command response callback function for @ref sd_ble_gap_phy_update BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_phy_update_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + const uint32_t err_code = ble_gap_phy_update_rsp_dec(p_buffer, + length, + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + + + return result_code; +} + +#ifndef _sd_ble_gap_phy_update +#define _sd_ble_gap_phy_update sd_ble_gap_phy_update +#endif +uint32_t _sd_ble_gap_phy_update(uint16_t conn_handle, + ble_gap_phys_t const * const p_gap_phys) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + const uint32_t err_code = ble_gap_phy_update_req_enc(conn_handle, p_gap_phys, + &(p_buffer[1]), &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_phy_update_rsp_dec); +} +#endif + +#if NRF_SD_BLE_API_VERSION >= 6 +/**@brief Command response callback function for @ref sd_ble_gap_adv_set_configure BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_adv_set_configure_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + uint32_t err_code = ble_gap_adv_set_configure_rsp_dec(p_buffer, + length, + (uint8_t *)mp_out_params[0], + &result_code); + + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + err_code = app_ble_gap_adv_set_register(*(uint8_t *)mp_out_params[0], + (uint8_t *)mp_out_params[1], + (uint8_t *)mp_out_params[2]); + APP_ERROR_CHECK(err_code); + + return result_code; +} + +#ifndef _sd_ble_gap_adv_set_configure +#define _sd_ble_gap_adv_set_configure sd_ble_gap_adv_set_configure +#endif +uint32_t _sd_ble_gap_adv_set_configure(uint8_t *p_adv_handle, + ble_gap_adv_data_t const *p_adv_data, + ble_gap_adv_params_t const *p_adv_params) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + + mp_out_params[0] = p_adv_handle; + mp_out_params[1] = p_adv_data ? p_adv_data->adv_data.p_data : NULL; + mp_out_params[2] = p_adv_data ? p_adv_data->scan_rsp_data.p_data : NULL; + const uint32_t err_code = ble_gap_adv_set_configure_req_enc(p_adv_handle, p_adv_data, p_adv_params, + &(p_buffer[1]), &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_adv_set_configure_rsp_dec); +} + +#ifndef S112 +/**@brief Command response callback function for @ref sd_ble_gap_qos_channel_survey_start BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_qos_channel_survey_start_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + uint32_t err_code = ble_gap_qos_channel_survey_start_rsp_dec(p_buffer, + length, + &result_code); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + return result_code; +} + +#ifndef _sd_ble_gap_qos_channel_survey_start +#define _sd_ble_gap_qos_channel_survey_start sd_ble_gap_qos_channel_survey_start +#endif +uint32_t _sd_ble_gap_qos_channel_survey_start(uint32_t interval_us) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + + const uint32_t err_code = ble_gap_qos_channel_survey_start_req_enc(interval_us, + &(p_buffer[1]), &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_qos_channel_survey_start_rsp_dec); +} + +/**@brief Command response callback function for @ref sd_ble_gap_qos_channel_survey_stop BLE command. + * + * Callback for decoding the output parameters and the command response return code. + * + * @param[in] p_buffer Pointer to begin of command response buffer. + * @param[in] length Length of data in bytes. + * + * @return Decoded command response return code. + */ +static uint32_t gap_qos_channel_survey_stop_rsp_dec(const uint8_t * p_buffer, uint16_t length) +{ + uint32_t result_code = 0; + + uint32_t err_code = ble_gap_qos_channel_survey_stop_rsp_dec(p_buffer, + length, + &result_code); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + return result_code; +} + +#ifndef _sd_ble_gap_qos_channel_survey_stop +#define _sd_ble_gap_qos_channel_survey_stop sd_ble_gap_qos_channel_survey_stop +#endif +uint32_t _sd_ble_gap_qos_channel_survey_stop(void) +{ + uint8_t * p_buffer; + uint32_t buffer_length = 0; + + tx_buf_alloc(&p_buffer, (uint16_t *)&buffer_length); + + const uint32_t err_code = ble_gap_qos_channel_survey_stop_req_enc(&(p_buffer[1]), &buffer_length); + //@note: Should never fail. + APP_ERROR_CHECK(err_code); + + //@note: Increment buffer length as internally managed packet type field must be included. + return ser_sd_transport_cmd_write(p_buffer, + (++buffer_length), + gap_qos_channel_survey_stop_rsp_dec); +} +#endif //!S112 +#endif |