diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/external/mbedtls/yotta/data/example-authcrypt/README.md')
-rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/external/mbedtls/yotta/data/example-authcrypt/README.md | 68 |
1 files changed, 68 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/external/mbedtls/yotta/data/example-authcrypt/README.md b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/mbedtls/yotta/data/example-authcrypt/README.md new file mode 100644 index 0000000..ae4b1ef --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/mbedtls/yotta/data/example-authcrypt/README.md @@ -0,0 +1,68 @@ +# Authenticated Encryption Example + +This application performs authenticated encryption and authenticated decryption of a buffer. It serves as a tutorial for the basic authenticated encryption functions of mbed TLS. + +## Pre-requisites + +To build and run this example you must have: + +* A computer with the following software installed: + * [CMake](http://www.cmake.org/download/). + * [yotta](https://github.com/ARMmbed/yotta). Please note that **yotta has its own set of dependencies**, listed in the [installation instructions](http://armmbed.github.io/yotta/#installing-on-windows). + * [Python](https://www.python.org/downloads/). + * [The ARM GCC toolchain](https://launchpad.net/gcc-arm-embedded). + * A serial terminal emulator (Like screen, pySerial and cu). +* An [FRDM-K64F](http://developer.mbed.org/platforms/FRDM-K64F/) development board, or another board supported by mbed OS (in which case you'll have to substitute frdm-k64f-gcc with the appropriate target in the instructions below). +* A micro-USB cable. +* If your OS is Windows, please follow the installation instructions [for the serial port driver](https://developer.mbed.org/handbook/Windows-serial-configuration). + +## Getting started + +1. Connect the FRDM-K64F to the computer with the micro-USB cable, being careful to use the "OpenSDA" connector on the target board. + +2. Navigate to the mbedtls directory supplied with your release and open a terminal. + +3. Set the yotta target: + + ``` + yotta target frdm-k64f-gcc + ``` + +4. Build mbedtls and the examples. This may take a long time if this is your first compilation: + + ``` + $ yotta build + ``` + +5. Copy `build/frdm-k64f-gcc/test/mbedtls-test-example-authcrypt.bin` to your mbed board and wait until the LED next to the USB port stops blinking. + +6. Start the serial terminal emulator and connect to the virtual serial port presented by FRDM-K64F. + + Use the following settings: + + * 115200 baud (not 9600). + * 8N1. + * No flow control. + +7. Press the Reset button on the board. + +8. The output in the terminal window should look like: + + ``` + {{timeout;10}} + {{host_test_name;default}} + {{description;mbed TLS example authcrypt}} + {{test_id;MBEDTLS_EX_AUTHCRYPT}} + {{start}} + + + plaintext message: 536f6d65207468696e67732061726520626574746572206c65667420756e7265616400 + ciphertext: c57f7afb94f14c7977d785d08682a2596bd62ee9dcf216b8cccd997afee9b402f5de1739e8e6467aa363749ef39392e5c66622b01c7203ec0a3d14 + decrypted: 536f6d65207468696e67732061726520626574746572206c65667420756e7265616400 + + DONE + {{success}} + {{end}} + ``` + +The actual output for the ciphertext line will vary on each run because of the use of a random nonce in the encryption process. |