diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/external/nfc_adafruit_library/adafruit_pn532.h')
-rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/external/nfc_adafruit_library/adafruit_pn532.h | 491 |
1 files changed, 491 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/external/nfc_adafruit_library/adafruit_pn532.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/nfc_adafruit_library/adafruit_pn532.h new file mode 100644 index 0000000..cb7ec84 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/external/nfc_adafruit_library/adafruit_pn532.h @@ -0,0 +1,491 @@ +/* + * Adafruit PN532 library adapted to use in nRF51 and nRF52 + * + * Software License Agreement (BSD License) + * + * Copyright (c) 2012, Adafruit Industries + * All rights reserved. + + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the copyright holders nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef ADAFRUIT_PN532__ +#define ADAFRUIT_PN532__ + +#include <stdint.h> +#include <stdbool.h> +#include "sdk_errors.h" + +/** @file + * @brief Adafruit PN532 NFC Shield library for reading and writing tags. + * + * @defgroup adafruit_pn532 Adafruit PN532 NFC Shield library + * @{ + * @ingroup app_common + * @brief Adafruit PN532 NFC Shield library for reading and writing tags. + * + * This library is an nRF51 and nRF52 port of the Adafruit PN532 library, + * which is available on <a href="https://github.com/adafruit/Adafruit-PN532" target="_blank">GitHub</a>, + * with some improvements and bugfixes. The library is responsible for + * communicating with the Adafruit PN532 NFC Shield and using its main + * functions. + * + * This library can be used with an <a href="https://www.adafruit.com/products/789" target="_blank">Adafruit PN532 NFC/RFID Controller Shield</a>. + */ + +/** + * @defgroup nrf_external_adafruit_pn532_frame_header Frame header + * @brief Macros related to the frame header and checksum parts. + * + * + * Sizes of the header and checksum parts of the frame. + * @{ + */ +#define HEADER_SEQUENCE_LENGTH 6 +#define CHECKSUM_SEQUENCE_LENGTH 2 +#define PN532_FRAME_OVERHEAD (HEADER_SEQUENCE_LENGTH + CHECKSUM_SEQUENCE_LENGTH) +/** @} */ + +/** + * @defgroup nrf_external_adafruit_pn532_frame_tokens Frame tokens and offsets + * @brief Macros related to frame tokens and offsets. + * + * @{ + * + * @name Tokens + * @brief Start and end location of frame token identifiers. + * @{ + */ +#define PN532_PREAMBLE (0x00) +#define PN532_STARTCODE1 (0x00) +#define PN532_STARTCODE2 (0xFF) +#define PN532_POSTAMBLE (0x00) +/** + * @} + * + * @name Offsets + * @{ + */ +#define PN532_PREAMBLE_OFFSET 0 +#define PN532_STARTCODE1_OFFSET 1 +#define PN532_STARTCODE2_OFFSET 2 +#define PN532_LENGTH_OFFSET 3 +#define PN532_LENGTH_CS_OFFSET 4 +#define PN532_TFI_OFFSET 5 +#define PN532_DATA_OFFSET 6 +/** + * @} + * @} + */ + +/** + * @defgroup nrf_external_adafruit_pn532_frame_direction_identifiers Frame direction identifiers + * @brief Macro codes identifying the communication direction. + * + * Each frame contains one of these codes to identify whether this frame + * was sent to or received from the Adafruit PN532 Shield. + * @{ + */ +#define PN532_HOSTTOPN532 (0xD4) +#define PN532_PN532TOHOST (0xD5) +/** @} */ + +/** + * @defgroup nrf_external_adafruit_pn532_command_codes Command codes + * @brief Macros for the available command codes. + * + * The following command codes are available in the Adafruit PN532 Shield. + * @{ + */ +#define PN532_COMMAND_DIAGNOSE (0x00) +#define PN532_COMMAND_GETFIRMWAREVERSION (0x02) +#define PN532_COMMAND_GETGENERALSTATUS (0x04) +#define PN532_COMMAND_READREGISTER (0x06) +#define PN532_COMMAND_WRITEREGISTER (0x08) +#define PN532_COMMAND_READGPIO (0x0C) +#define PN532_COMMAND_WRITEGPIO (0x0E) +#define PN532_COMMAND_SETSERIALBAUDRATE (0x10) +#define PN532_COMMAND_SETPARAMETERS (0x12) +#define PN532_COMMAND_SAMCONFIGURATION (0x14) +#define PN532_COMMAND_POWERDOWN (0x16) +#define PN532_COMMAND_RFCONFIGURATION (0x32) +#define PN532_COMMAND_RFREGULATIONTEST (0x58) +#define PN532_COMMAND_INJUMPFORDEP (0x56) +#define PN532_COMMAND_INJUMPFORPSL (0x46) +#define PN532_COMMAND_INLISTPASSIVETARGET (0x4A) +#define PN532_COMMAND_INATR (0x50) +#define PN532_COMMAND_INPSL (0x4E) +#define PN532_COMMAND_INDATAEXCHANGE (0x40) +#define PN532_COMMAND_INCOMMUNICATETHRU (0x42) +#define PN532_COMMAND_INDESELECT (0x44) +#define PN532_COMMAND_INRELEASE (0x52) +#define PN532_COMMAND_INSELECT (0x54) +#define PN532_COMMAND_INAUTOPOLL (0x60) +#define PN532_COMMAND_TGINITASTARGET (0x8C) +#define PN532_COMMAND_TGSETGENERALBYTES (0x92) +#define PN532_COMMAND_TGGETDATA (0x86) +#define PN532_COMMAND_TGSETDATA (0x8E) +#define PN532_COMMAND_TGSETMETADATA (0x94) +#define PN532_COMMAND_TGGETINITIATORCOMMAND (0x88) +#define PN532_COMMAND_TGRESPONSETOINITIATOR (0x90) +#define PN532_COMMAND_TGGETTARGETSTATUS (0x8A) +/** @} */ + +/** + * @defgroup nrf_external_adafruit_pn532_mifare_command_codes Mifare command codes + * @brief Macros for the available Mifare command codes. + * + * The following Mifare command codes are available in the Adafruit PN532 Shield. + * @{ + */ +#define MIFARE_CMD_AUTH_A (0x60) +#define MIFARE_CMD_AUTH_B (0x61) +#define MIFARE_CMD_READ (0x30) +#define MIFARE_CMD_WRITE (0xA0) +#define MIFARE_CMD_TRANSFER (0xB0) +#define MIFARE_CMD_DECREMENT (0xC0) +#define MIFARE_CMD_INCREMENT (0xC1) +#define MIFARE_CMD_STORE (0xC2) +#define MIFARE_ULTRALIGHT_CMD_WRITE (0xA2) +/** @} */ + +/** + * @defgroup nrf_external_adafruit_pn532_t2t Type 2 Tag specific parameters + * @brief Macros for Type 2 Tag specific parameters. + * @{ + */ +#define T2T_MAX_DATA_EXCHANGE 16 ///< Type 2 Tag maximal command data size (in bytes). +#define T2T_PAGE_SIZE 4 ///< Type 2 Tag page/block size (in bytes). +#define T2T_END_PAGE_OFFSET 3 ///< Offset of the last page/block in Type 2 Tag response payload. +/** @} */ + +/** + * @defgroup nrf_external_adafruit_pn532_nfc_a NFC-A initialisation response parameters. + * @brief Macros for NFC-A initialisation response parameters. + * @{ + */ +#define SENS_RES_ANTICOLLISION_INFO_BYTE 0 +#define SENS_RES_PLATFORM_INFO_BYTE 1 +#define SENS_RES_SIZE 2 +#define MAX_NFC_A_ID_LEN 10 +/** @} */ + +#define PN532_MIFARE_ISO14443A_BAUD (0x00) ///< Code identifying the baud rate for the ISO14443A (NFC-A) card type. + +#define PN532_I2C_ADDRESS (0x48 >> 1) ///< Address of the I2C peripheral of the Adafruit PN532 Shield. + +#ifndef PN532_PACKBUFF_SIZE + #define PN532_PACKBUFF_SIZE 64 +#endif + +/** + * @brief Basic information about detected NFC-A tag. + */ +typedef struct +{ + uint8_t sens_res[SENS_RES_SIZE]; ///< SENS_RES response bytes. + uint8_t sel_res; ///< SEL_RES response byte. + uint8_t nfc_id_len; ///< UID length. + uint8_t nfc_id[MAX_NFC_A_ID_LEN]; ///< NFC-A UID. +} nfc_a_tag_info; + +/** + * @name Functions used for initialization + * + * @{ */ + +/** @brief Function for initializing the communication with the Adafruit PN532 Shield. + * + * @note This library is not thread-safe, because it uses static buffers. + * + * @param[in] force If true, reinitialization of the library will be forced. + * + * @retval NRF_SUCCESS If the communication was initialized successfully. Otherwise, + * an error code is returned. + */ +ret_code_t adafruit_pn532_init(bool force); + +/** @brief Function for creating a new PN532 object using I2C. + * + * Before calling this function, PN532_IRQ and PN532_RESET must be configured. + * + * @retval NRF_SUCCESS If the object was created successfully. Otherwise, + * an error code is returned. + */ +ret_code_t adafruit_pn532_i2c_create(void); +/** @} */ + +/** + * @name Generic functions for the Adafruit PN532 Shield + * + * @{ */ + +/** @brief Function for configuring the Secure Access Module (SAM). + * + * This function configures the SAM to work in a mode specified in the mode parameter. For a reader + * operation, use SAMCONFIGURATION_MODE_NORMAL. + * + * @param[in] mode Mode in which the PN532 Shield should work. + * + * @retval NRF_SUCCESS If the SAM was configured successfully. Otherwise, + * an error code is returned. + */ +ret_code_t adafruit_pn532_sam_config(uint8_t mode); + +/** @brief Function for entering power-down mode with I2C as wake-up source. + * + * @retval NRF_SUCCESS If power-down mode was entered successfully. Otherwise, + * an error code is returned. + */ +ret_code_t adafruit_pn532_power_down(void); + +/** @brief Function for waking up the PN532 Shield from power-down mode. + * + * @retval NRF_SUCCESS If the PN532 Shield woke up successfully. Otherwise, + * an error code is returned. + */ +ret_code_t adafruit_pn532_wake_up(void); + +/** @brief Function for checking the firmware version of the PN532 chip. + * + * @param[out] p_response The chip's firmware version and ID. + * + * @retval NRF_SUCCESS If the function completed successfully. Otherwise, + * an error code is returned. + */ +ret_code_t adafruit_pn532_firmware_version_get(uint32_t * p_response); + +/** @brief Function for sending a command and waiting a specified period for the ACK. + * + * @param[in] p_cmd Pointer to the command buffer. + * @param[in] cmd_len The length of the command (in bytes). + * @param[in] timeout Time-out (in ms) before giving up. + * + * @retval NRF_SUCCESS If the command was sent successfully. Otherwise, + * an error code is returned. + */ +ret_code_t adafruit_pn532_cmd_send(uint8_t * p_cmd, uint8_t cmd_len, uint16_t timeout); + +/** @brief Function for enabling the PN532 RF field. + * + * @retval NRF_SUCCESS If the RF field was enabled successfully. Otherwise, + * an error code is returned. + */ +ret_code_t adafruit_pn532_field_on(void); + +/** @brief Function for disabling the PN532 RF field. + * + * @retval NRF_SUCCESS If the RF field was disabled successfully. Otherwise, + * an error code is returned. + */ +ret_code_t adafruit_pn532_field_off(void); +/** @} */ + +/** + * @name Functions for ISO14443A tags + * + * @{ */ + +/** @brief Function for detecting an ISO14443A (NFC-A) target presence in the RF field. + * + * This function enables the RF field and scans for ISO14443A (NFC-A) targets present + * in the field. The number of scan retries is set by the @ref adafruit_pn532_passive_activation_retries_set + * function. By default, the maximum number of retries is set to unlimited, which means + * that the PN532 Shield scans for targets until it finds one or the scan is + * canceled. The @p timeout parameter specifies the time-out of the scan. If it is + * set to a value greater than 0, the function exits with a failure if either the maximum number + * of retries or the time-out has been reached. If the @p timeout parameter is set to 0, + * a single scan is performed. When the ISO14443A (NFC-A) target is detected, the + * PN532 module initializes communication and reads the basic initialization information + * about NFC-A tag including SENS_RES, SEL_RES and UID. This information is retrieved by + * NFC reader during Technology Detection and Collision Resolution Activities. + * + * @param[in,out] p_tag_info Pointer to the structure where NFC-A Tag + * basic initialization information will be stored. + * @param[in] timeout Time-out (in ms). 0 means that only a single + * scan is performed. + * If no tag is presented before the time-out, + * the function returns NRF_ERROR_INTERNAL. + * + * @retval NRF_SUCCESS If the function completed successfully. Otherwise, + * an error code is returned. + */ +ret_code_t adafruit_pn532_nfc_a_target_init(nfc_a_tag_info * p_tag_info, + uint16_t timeout); + +/** @brief Function for exchanging an Application Protocol Data Unit (APDU) with the currently enlisted peer. + * + * @param[in] p_send Pointer to the data to send. + * @param[in] send_len Length of the data to send. + * @param[out] p_response Pointer to the buffer for response data. + * @param[in,out] p_response_len Pointer to the variable that stores + * the length of the p_response buffer (as + * input) and the length of the response data + * (as output). + * + * @retval NRF_SUCCESS If the function completed successfully. Otherwise, + * an error code is returned. + */ +ret_code_t adafruit_pn532_in_data_exchange(uint8_t * p_send, + uint8_t send_len, + uint8_t * p_response, + uint8_t * p_response_len); + +/** @brief Function for setting the MxRtyPassiveActivation parameter of the RFConfiguration register. + * + * This function sets the maximum number of retries when scanning for a tag. + * The default is an unlimited number of retries. + * + * @param[in] max_retries 0xFF to wait forever. 0x00..0xFE to time out + * after the specified number of retries. + * + * @retval NRF_SUCCESS If MxRtyPassiveActivation was set successfully. Otherwise, + * an error code is returned. + */ +ret_code_t adafruit_pn532_passive_activation_retries_set(uint8_t max_retries); + +/** @} */ + +/** + * @name Type 2 Tag related functions + * + * @{ */ + +/** @brief Function for reading 4 pages/blocks within Type 2 Tag, starting with + * the specified page/block number. + * + * This function reads 4 pages/blocks within Type 2 Tag at the specified page/block + * number, using Type 2 Tag READ command. + * + * @param[in] start_page The page/block number (0..63 in most cases). + * @param[out] p_buffer Pointer to the uint8_t array that will + * hold the retrieved data (if any). + * + * @retval NRF_SUCCESS If the data was read successfully. Otherwise, + * an error code is returned. + */ +ret_code_t adafruit_pn532_tag2_read(uint8_t start_page, uint8_t * p_buffer); + +/** @brief Function for writing an entire 4-byte page/block to the Type 2 Tag at the specified + * page/block address. + * + * This function writes a 4-byte sequence to the Type 2 Tag at the specified page/block, using + * Type 2 Tag WRITE command. + * + * @param[in] page The page/block number to write (0..63 in most cases). + * @param[in] p_data The uint8_t array that contains the data to write. + * The data should be exactly 4 bytes long. + * + * @retval NRF_SUCCESS If the data was written successfully. Otherwise, + * an error code is returned. + */ +ret_code_t adafruit_pn532_tag2_page_write(uint8_t page, uint8_t * p_data); + +/** @brief Function for writing an NDEF URI record to Type 2 Tag at the specified page (4..nn). + * + * This function writes an NDEF URI record to Type 2 Tag at the specified page (4..nn). It uses + * @ref adafruit_pn532_tag2_page_write to perform atomic writes. + * + * @param[in] uri_id The URI identifier code (0 = none, 0x01 = + * "http://www.", and so on). + * @param[in] p_url The URI text to write (null-terminated string). + * @param[in] data_len The maximum number of bytes that can be stored in the + * target device. + * + * @retval NRF_SUCCESS If the record was written successfully. Otherwise, + * an error code is returned. + */ +ret_code_t adafruit_pn532_ndef_uri_tag2_write(uint8_t uri_id, char * p_url, uint8_t data_len); + +/** @} */ + +/** + * @name Printing functions. + * + * @{ */ + +/** @brief Function for printing NFC-A Tag Info descriptor. + * + * This function prints NFC-A Tag Info descriptor. + * + * @param[in] p_tag_info Pointer to the NFC-A Tag Info descriptor. + */ +void adafruit_pn532_tag_info_printout(nfc_a_tag_info const * const p_tag_info); + +/** @} */ + +/** + * @name Low-level communication functions that utilize I2C and GPIO + * + * @{ */ + +/** @brief Function for checking PN532 Shield readiness. + * + * @retval True If the PN532 Shield is ready with a response. + * @retval False Otherwise. + */ +bool adafruit_pn532_is_ready(void); + +/** @brief Function for waiting until the PN532 Shield is ready. + * + * @param[in] timeout Time-out (in ms) before giving up. + * + * @retval True If the PN532 Shield is ready. + * @retval False Otherwise. + */ +bool adafruit_pn532_waitready_ms(uint16_t timeout); + +/** @brief Function for reading the ACK frame. + * + * @retval NRF_SUCCESS If the ACK frame was read. Otherwise, an error code is returned. + */ +ret_code_t adafruit_pn532_ack_read(void); + +/** @brief Function for reading n bytes of data from the PN532 Shield via I2C. + * + * @param[out] p_buff Pointer to the buffer where the data will be written. + * @param[in] n Number of bytes to read. + * + * @retval NRF_SUCCESS If the data was read successfully. Otherwise, + * an error code is returned. + */ +ret_code_t adafruit_pn532_data_read(uint8_t * p_buff, uint8_t n); + +/** @brief Function for writing a command to the PN532 Shield. + * + * This function writes a command to the PN532 Shield and automatically inserts + * the preamble and required frame details (such as checksum, length, ...) + * + * @param[in] p_cmd Pointer to the command buffer. + * @param[in] cmd_len Command length in bytes. + * + * @retval NRF_SUCCESS If the command was written successfully. Otherwise, + * an error code is returned. + */ +ret_code_t adafruit_pn532_command_write(uint8_t * p_cmd, uint8_t cmd_len); +/** @} */ + +/** + *@} + **/ + +#endif |