diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/modules/nrfx/drivers/include/nrfx_pwm.h')
| -rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/modules/nrfx/drivers/include/nrfx_pwm.h | 497 |
1 files changed, 497 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/modules/nrfx/drivers/include/nrfx_pwm.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/modules/nrfx/drivers/include/nrfx_pwm.h new file mode 100644 index 0000000..c4c15dd --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/modules/nrfx/drivers/include/nrfx_pwm.h @@ -0,0 +1,497 @@ +/** + * Copyright (c) 2015 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#ifndef NRFX_PWM_H__ +#define NRFX_PWM_H__ + +#include <nrfx.h> +#include <hal/nrf_pwm.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @defgroup nrfx_pwm PWM driver + * @{ + * @ingroup nrf_pwm + * @brief Pulse Width Modulation (PWM) peripheral driver. + */ + +/** + * @brief PWM driver instance data structure. + */ +typedef struct +{ + NRF_PWM_Type * p_registers; ///< Pointer to the structure with PWM peripheral instance registers. + uint8_t drv_inst_idx; ///< Driver instance index. +} nrfx_pwm_t; + +/** + * @brief Macro for creating a PWM driver instance. + */ +#define NRFX_PWM_INSTANCE(id) \ +{ \ + .p_registers = NRFX_CONCAT_2(NRF_PWM, id), \ + .drv_inst_idx = NRFX_CONCAT_3(NRFX_PWM, id, _INST_IDX), \ +} + +enum { +#if NRFX_CHECK(NRFX_PWM0_ENABLED) + NRFX_PWM0_INST_IDX, +#endif +#if NRFX_CHECK(NRFX_PWM1_ENABLED) + NRFX_PWM1_INST_IDX, +#endif +#if NRFX_CHECK(NRFX_PWM2_ENABLED) + NRFX_PWM2_INST_IDX, +#endif +#if NRFX_CHECK(NRFX_PWM3_ENABLED) + NRFX_PWM3_INST_IDX, +#endif + NRFX_PWM_ENABLED_COUNT +}; + +/** + * @brief This value can be provided instead of a pin number for any channel + * to specify that its output is not used and therefore does not need + * to be connected to a pin. + */ +#define NRFX_PWM_PIN_NOT_USED 0xFF + +/** + * @brief This value can be added to a pin number to inverse its polarity + * (set idle state = 1). + */ +#define NRFX_PWM_PIN_INVERTED 0x80 + +/** + * @brief PWM driver configuration structure. + */ +typedef struct +{ + uint8_t output_pins[NRF_PWM_CHANNEL_COUNT]; ///< Pin numbers for individual output channels (optional). + /**< Use @ref NRFX_PWM_PIN_NOT_USED + * if a given output channel is not needed. */ + uint8_t irq_priority; ///< Interrupt priority. + nrf_pwm_clk_t base_clock; ///< Base clock frequency. + nrf_pwm_mode_t count_mode; ///< Operating mode of the pulse generator counter. + uint16_t top_value; ///< Value up to which the pulse generator counter counts. + nrf_pwm_dec_load_t load_mode; ///< Mode of loading sequence data from RAM. + nrf_pwm_dec_step_t step_mode; ///< Mode of advancing the active sequence. +} nrfx_pwm_config_t; + +/** + * @brief PWM driver default configuration. + */ +#define NRFX_PWM_DEFAULT_CONFIG \ +{ \ + .output_pins = { NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN, \ + NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN, \ + NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN, \ + NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN }, \ + .irq_priority = NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY, \ + .base_clock = (nrf_pwm_clk_t)NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK, \ + .count_mode = (nrf_pwm_mode_t)NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE, \ + .top_value = NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE, \ + .load_mode = (nrf_pwm_dec_load_t)NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE, \ + .step_mode = (nrf_pwm_dec_step_t)NRFX_PWM_DEFAULT_CONFIG_STEP_MODE, \ +} + + +/** + * @brief PWM flags providing additional playback options. + */ +typedef enum +{ + NRFX_PWM_FLAG_STOP = 0x01, /**< When the requested playback is finished, + the peripheral should be stopped. + @note The STOP task is triggered when + the last value of the final sequence is + loaded from RAM, and the peripheral stops + at the end of the current PWM period. + For sequences with configured repeating + of duty cycle values, this might result in + less than the requested number of repeats + of the last value. */ + NRFX_PWM_FLAG_LOOP = 0x02, /**< When the requested playback is finished, + it should be started from the beginning. + This flag is ignored if used together + with @ref NRFX_PWM_FLAG_STOP. + @note The playback restart is done via a + shortcut configured in the PWM peripheral. + This shortcut triggers the proper starting + task when the final value of previous + playback is read from RAM and applied to + the pulse generator counter. + When this mechanism is used together with + the @ref NRF_PWM_STEP_TRIGGERED mode, + the playback restart will occur right + after switching to the final value (this + final value will be played only once). */ + NRFX_PWM_FLAG_SIGNAL_END_SEQ0 = 0x04, /**< The event handler should be + called when the last value + from sequence 0 is loaded. */ + NRFX_PWM_FLAG_SIGNAL_END_SEQ1 = 0x08, /**< The event handler should be + called when the last value + from sequence 1 is loaded. */ + NRFX_PWM_FLAG_NO_EVT_FINISHED = 0x10, /**< The playback finished event + (enabled by default) should be + suppressed. */ + NRFX_PWM_FLAG_START_VIA_TASK = 0x80, /**< The playback should not be + started directly by the called + function. Instead, the function + should only prepare it and + return the address of the task + to be triggered to start the + playback. */ +} nrfx_pwm_flag_t; + + +/** + * @brief PWM driver event type. + */ +typedef enum +{ + NRFX_PWM_EVT_FINISHED, ///< Sequence playback finished. + NRFX_PWM_EVT_END_SEQ0, /**< End of sequence 0 reached. Its data can be + safely modified now. */ + NRFX_PWM_EVT_END_SEQ1, /**< End of sequence 1 reached. Its data can be + safely modified now. */ + NRFX_PWM_EVT_STOPPED, ///< The PWM peripheral has been stopped. +} nrfx_pwm_evt_type_t; + +/** + * @brief PWM driver event handler type. + */ +typedef void (* nrfx_pwm_handler_t)(nrfx_pwm_evt_type_t event_type); + + +/** + * @brief Function for initializing the PWM driver. + * + * @param[in] p_instance Pointer to the driver instance structure. + * @param[in] p_config Pointer to the structure with initial configuration. + * + * @param[in] handler Event handler provided by the user. If NULL is passed + * instead, event notifications are not done and PWM + * interrupts are disabled. + * + * @retval NRFX_SUCCESS If initialization was successful. + * @retval NRFX_ERROR_INVALID_STATE If the driver was already initialized. + */ +nrfx_err_t nrfx_pwm_init(nrfx_pwm_t const * const p_instance, + nrfx_pwm_config_t const * p_config, + nrfx_pwm_handler_t handler); + +/** + * @brief Function for uninitializing the PWM driver. + * + * If any sequence playback is in progress, it is stopped immediately. + * + * @param[in] p_instance Pointer to the driver instance structure. + */ +void nrfx_pwm_uninit(nrfx_pwm_t const * const p_instance); + +/** + * @brief Function for starting a single sequence playback. + * + * To take advantage of the looping mechanism in the PWM peripheral, both + * sequences must be used (single sequence can be played back only once by + * the peripheral). Therefore, the provided sequence is internally set and + * played back as both sequence 0 and sequence 1. Consequently, if end of + * sequence notifications are required, events for both sequences should be + * used (that means that both the @ref NRFX_PWM_FLAG_SIGNAL_END_SEQ0 flag + * and the @ref NRFX_PWM_FLAG_SIGNAL_END_SEQ1 flag should be specified and + * the @ref NRFX_PWM_EVT_END_SEQ0 event and the @ref NRFX_PWM_EVT_END_SEQ1 + * event should be handled in the same way). + * + * Use the @ref NRFX_PWM_FLAG_START_VIA_TASK flag if you want the playback + * to be only prepared by this function, and you want to start it later by + * triggering a task (using PPI for instance). The function will then return + * the address of the task to be triggered. + * + * @note The array containing the duty cycle values for the specified sequence + * must be in RAM and cannot be allocated on stack. + * For detailed information, see @ref nrf_pwm_sequence_t. + * + * @param[in] p_instance Pointer to the driver instance structure. + * @param[in] p_sequence Sequence to be played back. + * @param[in] playback_count Number of playbacks to be performed (must not be 0). + * @param[in] flags Additional options. Pass any combination of + * @ref nrfx_pwm_flag_t "playback flags", or 0 + * for default settings. + * + * @return Address of the task to be triggered to start the playback if the @ref + * NRFX_PWM_FLAG_START_VIA_TASK flag was used, 0 otherwise. + */ +uint32_t nrfx_pwm_simple_playback(nrfx_pwm_t const * const p_instance, + nrf_pwm_sequence_t const * p_sequence, + uint16_t playback_count, + uint32_t flags); + +/** + * @brief Function for starting a two-sequence playback. + * + * Use the @ref NRFX_PWM_FLAG_START_VIA_TASK flag if you want the playback + * to be only prepared by this function, and you want to start it later by + * triggering a task (using PPI for instance). The function will then return + * the address of the task to be triggered. + * + * @note The array containing the duty cycle values for the specified sequence + * must be in RAM and cannot be allocated on stack. + * For detailed information, see @ref nrf_pwm_sequence_t. + * + * @param[in] p_instance Pointer to the driver instance structure. + * @param[in] p_sequence_0 First sequence to be played back. + * @param[in] p_sequence_1 Second sequence to be played back. + * @param[in] playback_count Number of playbacks to be performed (must not be 0). + * @param[in] flags Additional options. Pass any combination of + * @ref nrfx_pwm_flag_t "playback flags", or 0 + * for default settings. + * + * @return Address of the task to be triggered to start the playback if the @ref + * NRFX_PWM_FLAG_START_VIA_TASK flag was used, 0 otherwise. + */ +uint32_t nrfx_pwm_complex_playback(nrfx_pwm_t const * const p_instance, + nrf_pwm_sequence_t const * p_sequence_0, + nrf_pwm_sequence_t const * p_sequence_1, + uint16_t playback_count, + uint32_t flags); + +/** + * @brief Function for advancing the active sequence. + * + * This function only applies to @ref NRF_PWM_STEP_TRIGGERED mode. + * + * @param[in] p_instance Pointer to the driver instance structure. + */ +__STATIC_INLINE void nrfx_pwm_step(nrfx_pwm_t const * const p_instance); + +/** + * @brief Function for stopping the sequence playback. + * + * The playback is stopped at the end of the current PWM period. + * This means that if the active sequence is configured to repeat each duty + * cycle value for a certain number of PWM periods, the last played value + * might appear on the output less times than requested. + * + * @note This function can be instructed to wait until the playback is stopped + * (by setting @p wait_until_stopped to true). Note that, depending on + * the length of the PMW period, this might take a significant amount of + * time. Alternatively, the @ref nrfx_pwm_is_stopped function can be + * used to poll the status, or the @ref NRFX_PWM_EVT_STOPPED event can + * be used to get the notification when the playback is stopped, provided + * the event handler is defined. + * + * @param[in] p_instance Pointer to the driver instance structure. + * @param[in] wait_until_stopped If true, the function will not return until + * the playback is stopped. + * + * @retval true If the PWM peripheral is stopped. + * @retval false If the PWM peripheral is not stopped. + */ +bool nrfx_pwm_stop(nrfx_pwm_t const * const p_instance, + bool wait_until_stopped); + +/** + * @brief Function for checking the status of the PWM peripheral. + * + * @param[in] p_instance Pointer to the driver instance structure. + * + * @retval true If the PWM peripheral is stopped. + * @retval false If the PWM peripheral is not stopped. + */ +bool nrfx_pwm_is_stopped(nrfx_pwm_t const * const p_instance); + +/** + * @brief Function for updating the sequence data during playback. + * + * @param[in] p_instance Pointer to the driver instance structure. + * @param[in] seq_id Identifier of the sequence (0 or 1). + * @param[in] p_sequence Pointer to the new sequence definition. + */ +__STATIC_INLINE void nrfx_pwm_sequence_update( + nrfx_pwm_t const * const p_instance, + uint8_t seq_id, + nrf_pwm_sequence_t const * p_sequence); + +/** + * @brief Function for updating the pointer to the duty cycle values + * in the specified sequence during playback. + * + * @param[in] p_instance Pointer to the driver instance structure. + * @param[in] seq_id Identifier of the sequence (0 or 1). + * @param[in] values New pointer to the duty cycle values. + */ +__STATIC_INLINE void nrfx_pwm_sequence_values_update(nrfx_pwm_t const * const p_instance, + uint8_t seq_id, + nrf_pwm_values_t values); + +/** + * @brief Function for updating the number of duty cycle values + * in the specified sequence during playback. + * + * @param[in] p_instance Pointer to the driver instance structure. + * @param[in] seq_id Identifier of the sequence (0 or 1). + * @param[in] length New number of the duty cycle values. + */ +__STATIC_INLINE void nrfx_pwm_sequence_length_update(nrfx_pwm_t const * const p_instance, + uint8_t seq_id, + uint16_t length); + +/** + * @brief Function for updating the number of repeats for duty cycle values + * in specified sequence during playback. + * + * @param[in] p_instance Pointer to the driver instance structure. + * @param[in] seq_id Identifier of the sequence (0 or 1). + * @param[in] repeats New number of repeats. + */ +__STATIC_INLINE void nrfx_pwm_sequence_repeats_update(nrfx_pwm_t const * const p_instance, + uint8_t seq_id, + uint32_t repeats); + +/** + * @brief Function for updating the additional delay after the specified + * sequence during playback. + * + * @param[in] p_instance Pointer to the driver instance structure. + * @param[in] seq_id Identifier of the sequence (0 or 1). + * @param[in] end_delay New end delay value (in PWM periods). + */ +__STATIC_INLINE void nrfx_pwm_sequence_end_delay_update(nrfx_pwm_t const * const p_instance, + uint8_t seq_id, + uint32_t end_delay); + +/** + * @brief Function for returning the address of a specified PWM task that can + * be used in PPI module. + * + * @param[in] p_instance Pointer to the driver instance structure. + * @param[in] task Requested task. + * + * @return Task address. + */ +__STATIC_INLINE uint32_t nrfx_pwm_task_address_get(nrfx_pwm_t const * const p_instance, + nrf_pwm_task_t task); + +/**@brief Function for returning the address of a specified PWM event that can + * be used in PPI module. + * + * @param[in] p_instance Pointer to the driver instance structure. + * @param[in] event Requested event. + * + * @return Event address. + */ +__STATIC_INLINE uint32_t nrfx_pwm_event_address_get(nrfx_pwm_t const * const p_instance, + nrf_pwm_event_t event); + + +#ifndef SUPPRESS_INLINE_IMPLEMENTATION + +__STATIC_INLINE void nrfx_pwm_step(nrfx_pwm_t const * const p_instance) +{ + nrf_pwm_task_trigger(p_instance->p_registers, NRF_PWM_TASK_NEXTSTEP); +} + +__STATIC_INLINE void nrfx_pwm_sequence_update(nrfx_pwm_t const * const p_instance, + uint8_t seq_id, + nrf_pwm_sequence_t const * p_sequence) +{ + nrf_pwm_sequence_set(p_instance->p_registers, seq_id, p_sequence); +} + +__STATIC_INLINE void nrfx_pwm_sequence_values_update(nrfx_pwm_t const * const p_instance, + uint8_t seq_id, + nrf_pwm_values_t values) +{ + nrf_pwm_seq_ptr_set(p_instance->p_registers, seq_id, values.p_raw); +} + +__STATIC_INLINE void nrfx_pwm_sequence_length_update(nrfx_pwm_t const * const p_instance, + uint8_t seq_id, + uint16_t length) +{ + nrf_pwm_seq_cnt_set(p_instance->p_registers, seq_id, length); +} + +__STATIC_INLINE void nrfx_pwm_sequence_repeats_update(nrfx_pwm_t const * const p_instance, + uint8_t seq_id, + uint32_t repeats) +{ + nrf_pwm_seq_refresh_set(p_instance->p_registers, seq_id, repeats); +} + +__STATIC_INLINE void nrfx_pwm_sequence_end_delay_update(nrfx_pwm_t const * const p_instance, + uint8_t seq_id, + uint32_t end_delay) +{ + nrf_pwm_seq_end_delay_set(p_instance->p_registers, seq_id, end_delay); +} + +__STATIC_INLINE uint32_t nrfx_pwm_task_address_get(nrfx_pwm_t const * const p_instance, + nrf_pwm_task_t task) +{ + return nrf_pwm_task_address_get(p_instance->p_registers, task); +} + +__STATIC_INLINE uint32_t nrfx_pwm_event_address_get(nrfx_pwm_t const * const p_instance, + nrf_pwm_event_t event) +{ + return nrf_pwm_event_address_get(p_instance->p_registers, event); +} + +#endif // SUPPRESS_INLINE_IMPLEMENTATION + + +void nrfx_pwm_0_irq_handler(void); +void nrfx_pwm_1_irq_handler(void); +void nrfx_pwm_2_irq_handler(void); +void nrfx_pwm_3_irq_handler(void); + + +/** @} */ + +#ifdef __cplusplus +} +#endif + +#endif // NRFX_PWM_H__ |