diff options
Diffstat (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/modules/nrfx/mdk/nrf52810.svd')
| -rw-r--r-- | thirdparty/nRF5_SDK_15.0.0_a53641a/modules/nrfx/mdk/nrf52810.svd | 31726 |
1 files changed, 31726 insertions, 0 deletions
diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/modules/nrfx/mdk/nrf52810.svd b/thirdparty/nRF5_SDK_15.0.0_a53641a/modules/nrfx/mdk/nrf52810.svd new file mode 100644 index 0000000..6a7aea4 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/modules/nrfx/mdk/nrf52810.svd @@ -0,0 +1,31726 @@ +<?xml version="1.0" encoding="utf-8"?> +<!-- File naming: <vendor>_<part/series name>_svd.xml --> +<device schemaVersion="1.1" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" noNamespaceSchemaLocation="CMSIS-SVD.xsd"> + <vendor>Nordic Semiconductor</vendor> + <vendorID>Nordic</vendorID> + <name>nrf52810</name> + <series>nrf52</series> + <version>1</version> + <description>nRF52810 reference description for radio MCU with ARM 32-bit Cortex-M4 Microcontroller </description> + <licenseText> +Copyright (c) 2010 - 2018, Nordic Semiconductor ASA\n +\n +All rights reserved.\n +\n +Redistribution and use in source and binary forms, with or without modification,\n +are permitted provided that the following conditions are met:\n +\n +1. Redistributions of source code must retain the above copyright notice, this\n + list of conditions and the following disclaimer.\n +\n +2. Redistributions in binary form, except as embedded into a Nordic\n + Semiconductor ASA integrated circuit in a product or a software update for\n + such product, must reproduce the above copyright notice, this list of\n + conditions and the following disclaimer in the documentation and/or other\n + materials provided with the distribution.\n +\n +3. Neither the name of Nordic Semiconductor ASA nor the names of its\n + contributors may be used to endorse or promote products derived from this\n + software without specific prior written permission.\n +\n +4. This software, with or without modification, must only be used with a\n + Nordic Semiconductor ASA integrated circuit.\n +\n +5. Any software provided in binary form under this license must not be reverse\n + engineered, decompiled, modified and/or disassembled.\n +\n +THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS\n +OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES\n +OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE\n +DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE\n +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR\n +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE\n +GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)\n +HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT\n +LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT\n +OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.\n + </licenseText> + <addressUnitBits>8</addressUnitBits> + <width>32</width> + <size>32</size> + <resetValue>0x00000000</resetValue> + <resetMask>0xFFFFFFFF</resetMask> + <cpu> + <name>CM4</name> + <revision>r0p1</revision> + <endian>little</endian> + <mpuPresent>1</mpuPresent> + <fpuPresent>0</fpuPresent> + <nvicPrioBits>3</nvicPrioBits> + <vendorSystickConfig>0</vendorSystickConfig> + </cpu> + <headerSystemFilename>system_nrf52810</headerSystemFilename> + <headerDefinitionsPrefix>NRF_</headerDefinitionsPrefix> + <vendorExtensions> + <ExampleStackSize>2048</ExampleStackSize> + <ExampleHeapSize>2048</ExampleHeapSize> + <MaxInterrupts>112</MaxInterrupts> + </vendorExtensions> + <peripherals> + <peripheral> + <name>FICR</name> + <description>Factory information configuration registers</description> + <groupName>FICR</groupName> + <baseAddress>0x10000000</baseAddress> + <size>32</size> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <registers> + <register> + <name>CODEPAGESIZE</name> + <description>Code memory page size</description> + <addressOffset>0x010</addressOffset> + <access>read-only</access> + <resetValue>0x00001000</resetValue> + <fields> + <field> + <name>CODEPAGESIZE</name> + <description>Code memory page size</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>CODESIZE</name> + <description>Code memory size</description> + <addressOffset>0x014</addressOffset> + <access>read-only</access> + <resetValue>0x00000030</resetValue> + <fields> + <field> + <name>CODESIZE</name> + <description>Code memory size in number of pages</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <dim>2</dim> + <dimIncrement>4</dimIncrement> + <name>DEVICEID[%s]</name> + <description>Description collection[0]: Device identifier</description> + <addressOffset>0x060</addressOffset> + <access>read-only</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>DEVICEID</name> + <description>64 bit unique device identifier</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <dim>4</dim> + <dimIncrement>4</dimIncrement> + <name>ER[%s]</name> + <description>Description collection[0]: Encryption root, word 0</description> + <addressOffset>0x080</addressOffset> + <access>read-only</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>ER</name> + <description>Encryption root, word n</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <dim>4</dim> + <dimIncrement>4</dimIncrement> + <name>IR[%s]</name> + <description>Description collection[0]: Identity root, word 0</description> + <addressOffset>0x090</addressOffset> + <access>read-only</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>IR</name> + <description>Identity root, word n</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>DEVICEADDRTYPE</name> + <description>Device address type</description> + <addressOffset>0x0A0</addressOffset> + <access>read-only</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>DEVICEADDRTYPE</name> + <description>Device address type</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Public</name> + <description>Public address</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Random</name> + <description>Random address</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <dim>2</dim> + <dimIncrement>4</dimIncrement> + <name>DEVICEADDR[%s]</name> + <description>Description collection[0]: Device address 0</description> + <addressOffset>0x0A4</addressOffset> + <access>read-only</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>DEVICEADDR</name> + <description>48 bit device address</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <cluster> + <name>INFO</name> + <description>Device info</description> + <headerStructName>FICR_INFO</headerStructName> + <addressOffset>0x100</addressOffset> + <register> + <name>PART</name> + <description>Part code</description> + <addressOffset>0x000</addressOffset> + <access>read-only</access> + <resetValue>0x00052810</resetValue> + <fields> + <field> + <name>PART</name> + <description>Part code</description> + <lsb>0</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>N52810</name> + <description>nRF52810</description> + <value>0x52810</value> + </enumeratedValue> + <enumeratedValue> + <name>Unspecified</name> + <description>Unspecified</description> + <value>0xFFFFFFFF</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>VARIANT</name> + <description>Part variant, hardware version and production configuration</description> + <addressOffset>0x004</addressOffset> + <access>read-only</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>VARIANT</name> + <description>Part variant, hardware version and production configuration, encoded as ASCII</description> + <lsb>0</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>AAAA</name> + <description>AAAA</description> + <value>0x41414141</value> + </enumeratedValue> + <enumeratedValue> + <name>AAA0</name> + <description>AAA0</description> + <value>0x41414130</value> + </enumeratedValue> + <enumeratedValue> + <name>AABA</name> + <description>AABA</description> + <value>0x41414241</value> + </enumeratedValue> + <enumeratedValue> + <name>AABB</name> + <description>AABB</description> + <value>0x41414242</value> + </enumeratedValue> + <enumeratedValue> + <name>AAB0</name> + <description>AAB0</description> + <value>0x41414230</value> + </enumeratedValue> + <enumeratedValue> + <name>AACA</name> + <description>AACA</description> + <value>0x41414341</value> + </enumeratedValue> + <enumeratedValue> + <name>AACB</name> + <description>AACB</description> + <value>0x41414342</value> + </enumeratedValue> + <enumeratedValue> + <name>AAC0</name> + <description>AAC0</description> + <value>0x41414330</value> + </enumeratedValue> + <enumeratedValue> + <name>Unspecified</name> + <description>Unspecified</description> + <value>0xFFFFFFFF</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>PACKAGE</name> + <description>Package option</description> + <addressOffset>0x008</addressOffset> + <access>read-only</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PACKAGE</name> + <description>Package option</description> + <lsb>0</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>QF</name> + <description>QFxx - 48-pin QFN</description> + <value>0x2000</value> + </enumeratedValue> + <enumeratedValue> + <name>QC</name> + <description>QCxx - 32-pin QFN</description> + <value>0x2003</value> + </enumeratedValue> + <enumeratedValue> + <name>Unspecified</name> + <description>Unspecified</description> + <value>0xFFFFFFFF</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>RAM</name> + <description>RAM variant</description> + <addressOffset>0x00C</addressOffset> + <access>read-only</access> + <resetValue>0x00000018</resetValue> + <fields> + <field> + <name>RAM</name> + <description>RAM variant</description> + <lsb>0</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>K24</name> + <description>24 kByte RAM</description> + <value>0x18</value> + </enumeratedValue> + <enumeratedValue> + <name>Unspecified</name> + <description>Unspecified</description> + <value>0xFFFFFFFF</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>FLASH</name> + <description>Flash variant</description> + <addressOffset>0x010</addressOffset> + <access>read-only</access> + <resetValue>0x000000C0</resetValue> + <fields> + <field> + <name>FLASH</name> + <description>Flash variant</description> + <lsb>0</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>K192</name> + <description>192 kByte flash</description> + <value>0xC0</value> + </enumeratedValue> + <enumeratedValue> + <name>Unspecified</name> + <description>Unspecified</description> + <value>0xFFFFFFFF</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <dim>3</dim> + <dimIncrement>4</dimIncrement> + <name>UNUSED0[%s]</name> + <description>Description collection[0]: Unspecified</description> + <addressOffset>0x014</addressOffset> + <access>read-write</access> + </register> + </cluster> + <cluster> + <name>TEMP</name> + <description>Registers storing factory TEMP module linearization coefficients</description> + <headerStructName>FICR_TEMP</headerStructName> + <addressOffset>0x404</addressOffset> + <register> + <name>A0</name> + <description>Slope definition A0</description> + <addressOffset>0x000</addressOffset> + <access>read-only</access> + <resetValue>0x00000320</resetValue> + <fields> + <field> + <name>A</name> + <description>A (slope definition) register</description> + <lsb>0</lsb> + <msb>11</msb> + </field> + </fields> + </register> + <register> + <name>A1</name> + <description>Slope definition A1</description> + <addressOffset>0x004</addressOffset> + <access>read-only</access> + <resetValue>0x00000343</resetValue> + <fields> + <field> + <name>A</name> + <description>A (slope definition) register</description> + <lsb>0</lsb> + <msb>11</msb> + </field> + </fields> + </register> + <register> + <name>A2</name> + <description>Slope definition A2</description> + <addressOffset>0x008</addressOffset> + <access>read-only</access> + <resetValue>0x0000035D</resetValue> + <fields> + <field> + <name>A</name> + <description>A (slope definition) register</description> + <lsb>0</lsb> + <msb>11</msb> + </field> + </fields> + </register> + <register> + <name>A3</name> + <description>Slope definition A3</description> + <addressOffset>0x00C</addressOffset> + <access>read-only</access> + <resetValue>0x00000400</resetValue> + <fields> + <field> + <name>A</name> + <description>A (slope definition) register</description> + <lsb>0</lsb> + <msb>11</msb> + </field> + </fields> + </register> + <register> + <name>A4</name> + <description>Slope definition A4</description> + <addressOffset>0x010</addressOffset> + <access>read-only</access> + <resetValue>0x00000452</resetValue> + <fields> + <field> + <name>A</name> + <description>A (slope definition) register</description> + <lsb>0</lsb> + <msb>11</msb> + </field> + </fields> + </register> + <register> + <name>A5</name> + <description>Slope definition A5</description> + <addressOffset>0x014</addressOffset> + <access>read-only</access> + <resetValue>0x0000037B</resetValue> + <fields> + <field> + <name>A</name> + <description>A (slope definition) register</description> + <lsb>0</lsb> + <msb>11</msb> + </field> + </fields> + </register> + <register> + <name>B0</name> + <description>Y-intercept B0</description> + <addressOffset>0x018</addressOffset> + <access>read-only</access> + <resetValue>0x00003FCC</resetValue> + <fields> + <field> + <name>B</name> + <description>B (y-intercept)</description> + <lsb>0</lsb> + <msb>13</msb> + </field> + </fields> + </register> + <register> + <name>B1</name> + <description>Y-intercept B1</description> + <addressOffset>0x01C</addressOffset> + <access>read-only</access> + <resetValue>0x00003F98</resetValue> + <fields> + <field> + <name>B</name> + <description>B (y-intercept)</description> + <lsb>0</lsb> + <msb>13</msb> + </field> + </fields> + </register> + <register> + <name>B2</name> + <description>Y-intercept B2</description> + <addressOffset>0x020</addressOffset> + <access>read-only</access> + <resetValue>0x00003F98</resetValue> + <fields> + <field> + <name>B</name> + <description>B (y-intercept)</description> + <lsb>0</lsb> + <msb>13</msb> + </field> + </fields> + </register> + <register> + <name>B3</name> + <description>Y-intercept B3</description> + <addressOffset>0x024</addressOffset> + <access>read-only</access> + <resetValue>0x00000012</resetValue> + <fields> + <field> + <name>B</name> + <description>B (y-intercept)</description> + <lsb>0</lsb> + <msb>13</msb> + </field> + </fields> + </register> + <register> + <name>B4</name> + <description>Y-intercept B4</description> + <addressOffset>0x028</addressOffset> + <access>read-only</access> + <resetValue>0x0000004D</resetValue> + <fields> + <field> + <name>B</name> + <description>B (y-intercept)</description> + <lsb>0</lsb> + <msb>13</msb> + </field> + </fields> + </register> + <register> + <name>B5</name> + <description>Y-intercept B5</description> + <addressOffset>0x02C</addressOffset> + <access>read-only</access> + <resetValue>0x00003E10</resetValue> + <fields> + <field> + <name>B</name> + <description>B (y-intercept)</description> + <lsb>0</lsb> + <msb>13</msb> + </field> + </fields> + </register> + <register> + <name>T0</name> + <description>Segment end T0</description> + <addressOffset>0x030</addressOffset> + <access>read-only</access> + <resetValue>0x000000E2</resetValue> + <fields> + <field> + <name>T</name> + <description>T (segment end) register</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + </fields> + </register> + <register> + <name>T1</name> + <description>Segment end T1</description> + <addressOffset>0x034</addressOffset> + <access>read-only</access> + <resetValue>0x00000000</resetValue> + <fields> + <field> + <name>T</name> + <description>T (segment end) register</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + </fields> + </register> + <register> + <name>T2</name> + <description>Segment end T2</description> + <addressOffset>0x038</addressOffset> + <access>read-only</access> + <resetValue>0x00000014</resetValue> + <fields> + <field> + <name>T</name> + <description>T (segment end) register</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + </fields> + </register> + <register> + <name>T3</name> + <description>Segment end T3</description> + <addressOffset>0x03C</addressOffset> + <access>read-only</access> + <resetValue>0x00000019</resetValue> + <fields> + <field> + <name>T</name> + <description>T (segment end) register</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + </fields> + </register> + <register> + <name>T4</name> + <description>Segment end T4</description> + <addressOffset>0x040</addressOffset> + <access>read-only</access> + <resetValue>0x00000050</resetValue> + <fields> + <field> + <name>T</name> + <description>T (segment end) register</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + </fields> + </register> + </cluster> + </registers> + </peripheral> + <peripheral> + <name>UICR</name> + <description>User information configuration registers</description> + <groupName>UICR</groupName> + <baseAddress>0x10001000</baseAddress> + <size>32</size> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <registers> + <register> + <name>UNUSED0</name> + <description>Unspecified</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + </register> + <register> + <name>UNUSED1</name> + <description>Unspecified</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + </register> + <register> + <name>UNUSED2</name> + <description>Unspecified</description> + <addressOffset>0x008</addressOffset> + <access>read-write</access> + </register> + <register> + <name>UNUSED3</name> + <description>Unspecified</description> + <addressOffset>0x010</addressOffset> + <access>read-write</access> + </register> + <register> + <dim>15</dim> + <dimIncrement>4</dimIncrement> + <name>NRFFW[%s]</name> + <description>Description collection[0]: Reserved for Nordic firmware design</description> + <addressOffset>0x014</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>NRFFW</name> + <description>Reserved for Nordic firmware design</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <dim>12</dim> + <dimIncrement>4</dimIncrement> + <name>NRFHW[%s]</name> + <description>Description collection[0]: Reserved for Nordic hardware design</description> + <addressOffset>0x050</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>NRFHW</name> + <description>Reserved for Nordic hardware design</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <dim>32</dim> + <dimIncrement>4</dimIncrement> + <name>CUSTOMER[%s]</name> + <description>Description collection[0]: Reserved for customer</description> + <addressOffset>0x080</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>CUSTOMER</name> + <description>Reserved for customer</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <dim>2</dim> + <dimIncrement>4</dimIncrement> + <name>PSELRESET[%s]</name> + <description>Description collection[0]: Mapping of the nRESET function (see POWER chapter for details)</description> + <addressOffset>0x200</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>GPIO number P0.n onto which reset is exposed</description> + <lsb>0</lsb> + <msb>5</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>APPROTECT</name> + <description>Access port protection</description> + <addressOffset>0x208</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PALL</name> + <description>Enable or disable access port protection.</description> + <lsb>0</lsb> + <msb>7</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0xFF</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>0x00</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </registers> + </peripheral> + <peripheral> + <name>BPROT</name> + <description>Block Protect</description> + <groupName>BPROT</groupName> + <baseAddress>0x40000000</baseAddress> + <size>32</size> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <registers> + <register> + <name>CONFIG0</name> + <description>Block protect configuration register 0</description> + <addressOffset>0x600</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>REGION0</name> + <description>Enable protection for region 0. Write '0' has no effect.</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION1</name> + <description>Enable protection for region 1. Write '0' has no effect.</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION2</name> + <description>Enable protection for region 2. Write '0' has no effect.</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION3</name> + <description>Enable protection for region 3. Write '0' has no effect.</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION4</name> + <description>Enable protection for region 4. Write '0' has no effect.</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION5</name> + <description>Enable protection for region 5. Write '0' has no effect.</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION6</name> + <description>Enable protection for region 6. Write '0' has no effect.</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION7</name> + <description>Enable protection for region 7. Write '0' has no effect.</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION8</name> + <description>Enable protection for region 8. Write '0' has no effect.</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION9</name> + <description>Enable protection for region 9. Write '0' has no effect.</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION10</name> + <description>Enable protection for region 10. Write '0' has no effect.</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION11</name> + <description>Enable protection for region 11. Write '0' has no effect.</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION12</name> + <description>Enable protection for region 12. Write '0' has no effect.</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION13</name> + <description>Enable protection for region 13. Write '0' has no effect.</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION14</name> + <description>Enable protection for region 14. Write '0' has no effect.</description> + <lsb>14</lsb> + <msb>14</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION15</name> + <description>Enable protection for region 15. Write '0' has no effect.</description> + <lsb>15</lsb> + <msb>15</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION16</name> + <description>Enable protection for region 16. Write '0' has no effect.</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION17</name> + <description>Enable protection for region 17. Write '0' has no effect.</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION18</name> + <description>Enable protection for region 18. Write '0' has no effect.</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION19</name> + <description>Enable protection for region 19. Write '0' has no effect.</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION20</name> + <description>Enable protection for region 20. Write '0' has no effect.</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION21</name> + <description>Enable protection for region 21. Write '0' has no effect.</description> + <lsb>21</lsb> + <msb>21</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION22</name> + <description>Enable protection for region 22. Write '0' has no effect.</description> + <lsb>22</lsb> + <msb>22</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION23</name> + <description>Enable protection for region 23. Write '0' has no effect.</description> + <lsb>23</lsb> + <msb>23</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION24</name> + <description>Enable protection for region 24. Write '0' has no effect.</description> + <lsb>24</lsb> + <msb>24</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION25</name> + <description>Enable protection for region 25. Write '0' has no effect.</description> + <lsb>25</lsb> + <msb>25</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION26</name> + <description>Enable protection for region 26. Write '0' has no effect.</description> + <lsb>26</lsb> + <msb>26</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION27</name> + <description>Enable protection for region 27. Write '0' has no effect.</description> + <lsb>27</lsb> + <msb>27</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION28</name> + <description>Enable protection for region 28. Write '0' has no effect.</description> + <lsb>28</lsb> + <msb>28</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION29</name> + <description>Enable protection for region 29. Write '0' has no effect.</description> + <lsb>29</lsb> + <msb>29</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION30</name> + <description>Enable protection for region 30. Write '0' has no effect.</description> + <lsb>30</lsb> + <msb>30</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION31</name> + <description>Enable protection for region 31. Write '0' has no effect.</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>CONFIG1</name> + <description>Block protect configuration register 1</description> + <addressOffset>0x604</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>REGION32</name> + <description>Enable protection for region 32. Write '0' has no effect.</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION33</name> + <description>Enable protection for region 33. Write '0' has no effect.</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION34</name> + <description>Enable protection for region 34. Write '0' has no effect.</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION35</name> + <description>Enable protection for region 35. Write '0' has no effect.</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION36</name> + <description>Enable protection for region 36. Write '0' has no effect.</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION37</name> + <description>Enable protection for region 37. Write '0' has no effect.</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION38</name> + <description>Enable protection for region 38. Write '0' has no effect.</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION39</name> + <description>Enable protection for region 39. Write '0' has no effect.</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION40</name> + <description>Enable protection for region 40. Write '0' has no effect.</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION41</name> + <description>Enable protection for region 41. Write '0' has no effect.</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION42</name> + <description>Enable protection for region 42. Write '0' has no effect.</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION43</name> + <description>Enable protection for region 43. Write '0' has no effect.</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION44</name> + <description>Enable protection for region 44. Write '0' has no effect.</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION45</name> + <description>Enable protection for region 45. Write '0' has no effect.</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION46</name> + <description>Enable protection for region 46. Write '0' has no effect.</description> + <lsb>14</lsb> + <msb>14</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REGION47</name> + <description>Enable protection for region 47. Write '0' has no effect.</description> + <lsb>15</lsb> + <msb>15</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Protection disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Protection enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>DISABLEINDEBUG</name> + <description>Disable protection mechanism in debug mode</description> + <addressOffset>0x608</addressOffset> + <access>read-write</access> + <resetValue>0x00000001</resetValue> + <fields> + <field> + <name>DISABLEINDEBUG</name> + <description>Disable the protection mechanism for NVM regions while in debug mode. This register will only disable the protection mechanism if the device is in debug mode.</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disabled in debug</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enabled in debug</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>UNUSED0</name> + <description>Unspecified</description> + <addressOffset>0x60C</addressOffset> + <access>read-write</access> + </register> + </registers> + </peripheral> + <peripheral> + <name>POWER</name> + <description>Power control</description> + <groupName>POWER</groupName> + <baseAddress>0x40000000</baseAddress> + <size>32</size> + <alternatePeripheral>BPROT</alternatePeripheral> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>POWER_CLOCK</name> + <value>0</value> + </interrupt> + <registers> + <register> + <name>TASKS_CONSTLAT</name> + <description>Enable constant latency mode</description> + <addressOffset>0x078</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_CONSTLAT</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_LOWPWR</name> + <description>Enable low power mode (variable latency)</description> + <addressOffset>0x07C</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_LOWPWR</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_POFWARN</name> + <description>Power failure warning</description> + <addressOffset>0x108</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_POFWARN</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_SLEEPENTER</name> + <description>CPU entered WFI/WFE sleep</description> + <addressOffset>0x114</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_SLEEPENTER</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_SLEEPEXIT</name> + <description>CPU exited WFI/WFE sleep</description> + <addressOffset>0x118</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_SLEEPEXIT</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>POFWARN</name> + <description>Write '1' to Enable interrupt for POFWARN event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SLEEPENTER</name> + <description>Write '1' to Enable interrupt for SLEEPENTER event</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SLEEPEXIT</name> + <description>Write '1' to Enable interrupt for SLEEPEXIT event</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>POFWARN</name> + <description>Write '1' to Disable interrupt for POFWARN event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SLEEPENTER</name> + <description>Write '1' to Disable interrupt for SLEEPENTER event</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SLEEPEXIT</name> + <description>Write '1' to Disable interrupt for SLEEPEXIT event</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>RESETREAS</name> + <description>Reset reason</description> + <addressOffset>0x400</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>RESETPIN</name> + <description>Reset from pin-reset detected</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotDetected</name> + <description>Not detected</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Detected</name> + <description>Detected</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DOG</name> + <description>Reset from watchdog detected</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotDetected</name> + <description>Not detected</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Detected</name> + <description>Detected</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SREQ</name> + <description>Reset from soft reset detected</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotDetected</name> + <description>Not detected</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Detected</name> + <description>Detected</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>LOCKUP</name> + <description>Reset from CPU lock-up detected</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotDetected</name> + <description>Not detected</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Detected</name> + <description>Detected</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>OFF</name> + <description>Reset due to wake up from System OFF mode when wakeup is triggered from DETECT signal from GPIO</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotDetected</name> + <description>Not detected</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Detected</name> + <description>Detected</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DIF</name> + <description>Reset due to wake up from System OFF mode when wakeup is triggered from entering into debug interface mode</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotDetected</name> + <description>Not detected</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Detected</name> + <description>Detected</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>SYSTEMOFF</name> + <description>System OFF register</description> + <addressOffset>0x500</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>SYSTEMOFF</name> + <description>Enable System OFF mode</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Enter</name> + <description>Enable System OFF mode</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>POFCON</name> + <description>Power failure comparator configuration</description> + <addressOffset>0x510</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>POF</name> + <description>Enable or disable power failure comparator</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>THRESHOLD</name> + <description>Power failure comparator threshold setting</description> + <lsb>1</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>V17</name> + <description>Set threshold to 1.7 V</description> + <value>4</value> + </enumeratedValue> + <enumeratedValue> + <name>V18</name> + <description>Set threshold to 1.8 V</description> + <value>5</value> + </enumeratedValue> + <enumeratedValue> + <name>V19</name> + <description>Set threshold to 1.9 V</description> + <value>6</value> + </enumeratedValue> + <enumeratedValue> + <name>V20</name> + <description>Set threshold to 2.0 V</description> + <value>7</value> + </enumeratedValue> + <enumeratedValue> + <name>V21</name> + <description>Set threshold to 2.1 V</description> + <value>8</value> + </enumeratedValue> + <enumeratedValue> + <name>V22</name> + <description>Set threshold to 2.2 V</description> + <value>9</value> + </enumeratedValue> + <enumeratedValue> + <name>V23</name> + <description>Set threshold to 2.3 V</description> + <value>10</value> + </enumeratedValue> + <enumeratedValue> + <name>V24</name> + <description>Set threshold to 2.4 V</description> + <value>11</value> + </enumeratedValue> + <enumeratedValue> + <name>V25</name> + <description>Set threshold to 2.5 V</description> + <value>12</value> + </enumeratedValue> + <enumeratedValue> + <name>V26</name> + <description>Set threshold to 2.6 V</description> + <value>13</value> + </enumeratedValue> + <enumeratedValue> + <name>V27</name> + <description>Set threshold to 2.7 V</description> + <value>14</value> + </enumeratedValue> + <enumeratedValue> + <name>V28</name> + <description>Set threshold to 2.8 V</description> + <value>15</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>GPREGRET</name> + <description>General purpose retention register</description> + <addressOffset>0x51C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>GPREGRET</name> + <description>General purpose retention register</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + </fields> + </register> + <register> + <name>GPREGRET2</name> + <description>General purpose retention register</description> + <addressOffset>0x520</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>GPREGRET</name> + <description>General purpose retention register</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + </fields> + </register> + <register> + <name>DCDCEN</name> + <description>DC/DC enable register</description> + <addressOffset>0x578</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>DCDCEN</name> + <description>Enable or disable DC/DC converter</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <cluster> + <dim>8</dim> + <dimIncrement>16</dimIncrement> + <name>RAM[%s]</name> + <description>Unspecified</description> + <headerStructName>POWER_RAM</headerStructName> + <addressOffset>0x900</addressOffset> + <register> + <name>POWER</name> + <description>Description cluster[0]: RAM0 power control register</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <resetValue>0x0000FFFF</resetValue> + <fields> + <field> + <name>S0POWER</name> + <description>Keep RAM section S0 ON or OFF in System ON mode.</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Off</name> + <description>Off</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>On</name> + <description>On</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>S1POWER</name> + <description>Keep RAM section S1 ON or OFF in System ON mode.</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Off</name> + <description>Off</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>On</name> + <description>On</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>S0RETENTION</name> + <description>Keep retention on RAM section S0 when RAM section is in OFF</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <enumeratedValue> + <name>Off</name> + <description>Off</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>On</name> + <description>On</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>S1RETENTION</name> + <description>Keep retention on RAM section S1 when RAM section is in OFF</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <enumeratedValue> + <name>Off</name> + <description>Off</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>On</name> + <description>On</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>POWERSET</name> + <description>Description cluster[0]: RAM0 power control set register</description> + <addressOffset>0x004</addressOffset> + <access>write-only</access> + <resetValue>0x0000FFFF</resetValue> + <fields> + <field> + <name>S0POWER</name> + <description>Keep RAM section S0 of RAM0 on or off in System ON mode</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>On</name> + <description>On</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>S1POWER</name> + <description>Keep RAM section S1 of RAM0 on or off in System ON mode</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>On</name> + <description>On</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>S0RETENTION</name> + <description>Keep retention on RAM section S0 when RAM section is switched off</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <enumeratedValue> + <name>On</name> + <description>On</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>S1RETENTION</name> + <description>Keep retention on RAM section S1 when RAM section is switched off</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <enumeratedValue> + <name>On</name> + <description>On</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>POWERCLR</name> + <description>Description cluster[0]: RAM0 power control clear register</description> + <addressOffset>0x008</addressOffset> + <access>write-only</access> + <resetValue>0x0000FFFF</resetValue> + <fields> + <field> + <name>S0POWER</name> + <description>Keep RAM section S0 of RAM0 on or off in System ON mode</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Off</name> + <description>Off</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>S1POWER</name> + <description>Keep RAM section S1 of RAM0 on or off in System ON mode</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Off</name> + <description>Off</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>S0RETENTION</name> + <description>Keep retention on RAM section S0 when RAM section is switched off</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <enumeratedValue> + <name>Off</name> + <description>Off</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>S1RETENTION</name> + <description>Keep retention on RAM section S1 when RAM section is switched off</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <enumeratedValue> + <name>Off</name> + <description>Off</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </cluster> + </registers> + </peripheral> + <peripheral> + <name>CLOCK</name> + <description>Clock control</description> + <groupName>CLOCK</groupName> + <baseAddress>0x40000000</baseAddress> + <size>32</size> + <alternatePeripheral>BPROT</alternatePeripheral> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>POWER_CLOCK</name> + <value>0</value> + </interrupt> + <registers> + <register> + <name>TASKS_HFCLKSTART</name> + <description>Start HFCLK crystal oscillator</description> + <addressOffset>0x000</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_HFCLKSTART</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_HFCLKSTOP</name> + <description>Stop HFCLK crystal oscillator</description> + <addressOffset>0x004</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_HFCLKSTOP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_LFCLKSTART</name> + <description>Start LFCLK source</description> + <addressOffset>0x008</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_LFCLKSTART</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_LFCLKSTOP</name> + <description>Stop LFCLK source</description> + <addressOffset>0x00C</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_LFCLKSTOP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_CAL</name> + <description>Start calibration of LFRC oscillator</description> + <addressOffset>0x010</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_CAL</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_CTSTART</name> + <description>Start calibration timer</description> + <addressOffset>0x014</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_CTSTART</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_CTSTOP</name> + <description>Stop calibration timer</description> + <addressOffset>0x018</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_CTSTOP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_HFCLKSTARTED</name> + <description>HFCLK oscillator started</description> + <addressOffset>0x100</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_HFCLKSTARTED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_LFCLKSTARTED</name> + <description>LFCLK started</description> + <addressOffset>0x104</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_LFCLKSTARTED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_DONE</name> + <description>Calibration of LFCLK RC oscillator complete event</description> + <addressOffset>0x10C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_DONE</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_CTTO</name> + <description>Calibration timer timeout</description> + <addressOffset>0x110</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_CTTO</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>HFCLKSTARTED</name> + <description>Write '1' to Enable interrupt for HFCLKSTARTED event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>LFCLKSTARTED</name> + <description>Write '1' to Enable interrupt for LFCLKSTARTED event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DONE</name> + <description>Write '1' to Enable interrupt for DONE event</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CTTO</name> + <description>Write '1' to Enable interrupt for CTTO event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>HFCLKSTARTED</name> + <description>Write '1' to Disable interrupt for HFCLKSTARTED event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>LFCLKSTARTED</name> + <description>Write '1' to Disable interrupt for LFCLKSTARTED event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DONE</name> + <description>Write '1' to Disable interrupt for DONE event</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CTTO</name> + <description>Write '1' to Disable interrupt for CTTO event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>HFCLKRUN</name> + <description>Status indicating that HFCLKSTART task has been triggered</description> + <addressOffset>0x408</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>STATUS</name> + <description>HFCLKSTART task triggered or not</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotTriggered</name> + <description>Task not triggered</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Triggered</name> + <description>Task triggered</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>HFCLKSTAT</name> + <description>HFCLK status</description> + <addressOffset>0x40C</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>SRC</name> + <description>Source of HFCLK</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>RC</name> + <description>64 MHz internal oscillator (HFINT)</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Xtal</name> + <description>64 MHz crystal oscillator (HFXO)</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>STATE</name> + <description>HFCLK state</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotRunning</name> + <description>HFCLK not running</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Running</name> + <description>HFCLK running</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>LFCLKRUN</name> + <description>Status indicating that LFCLKSTART task has been triggered</description> + <addressOffset>0x414</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>STATUS</name> + <description>LFCLKSTART task triggered or not</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotTriggered</name> + <description>Task not triggered</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Triggered</name> + <description>Task triggered</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>LFCLKSTAT</name> + <description>LFCLK status</description> + <addressOffset>0x418</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>SRC</name> + <description>Source of LFCLK</description> + <lsb>0</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>RC</name> + <description>32.768 kHz RC oscillator</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Xtal</name> + <description>32.768 kHz crystal oscillator</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Synth</name> + <description>32.768 kHz synthesized from HFCLK</description> + <value>2</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>STATE</name> + <description>LFCLK state</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotRunning</name> + <description>LFCLK not running</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Running</name> + <description>LFCLK running</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>LFCLKSRCCOPY</name> + <description>Copy of LFCLKSRC register, set when LFCLKSTART task was triggered</description> + <addressOffset>0x41C</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>SRC</name> + <description>Clock source</description> + <lsb>0</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>RC</name> + <description>32.768 kHz RC oscillator</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Xtal</name> + <description>32.768 kHz crystal oscillator</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Synth</name> + <description>32.768 kHz synthesized from HFCLK</description> + <value>2</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>LFCLKSRC</name> + <description>Clock source for the LFCLK</description> + <addressOffset>0x518</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>SRC</name> + <description>Clock source</description> + <lsb>0</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>RC</name> + <description>32.768 kHz RC oscillator</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Xtal</name> + <description>32.768 kHz crystal oscillator</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Synth</name> + <description>32.768 kHz synthesized from HFCLK</description> + <value>2</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>BYPASS</name> + <description>Enable or disable bypass of LFCLK crystal oscillator with external clock source</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable (use with Xtal or low-swing external source)</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable (use with rail-to-rail external source)</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>EXTERNAL</name> + <description>Enable or disable external source for LFCLK</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable external source (use with Xtal)</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable use of external source instead of Xtal (SRC needs to be set to Xtal)</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>CTIV</name> + <description>Calibration timer interval</description> + <addressOffset>0x538</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>CTIV</name> + <description>Calibration timer interval in multiple of 0.25 seconds. Range: 0.25 seconds to 31.75 seconds.</description> + <lsb>0</lsb> + <msb>6</msb> + </field> + </fields> + </register> + </registers> + </peripheral> + <peripheral> + <name>RADIO</name> + <description>2.4 GHz Radio</description> + <groupName>RADIO</groupName> + <baseAddress>0x40001000</baseAddress> + <size>32</size> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>RADIO</name> + <value>1</value> + </interrupt> + <registers> + <register> + <name>TASKS_TXEN</name> + <description>Enable RADIO in TX mode</description> + <addressOffset>0x000</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_TXEN</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_RXEN</name> + <description>Enable RADIO in RX mode</description> + <addressOffset>0x004</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_RXEN</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_START</name> + <description>Start RADIO</description> + <addressOffset>0x008</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_START</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_STOP</name> + <description>Stop RADIO</description> + <addressOffset>0x00C</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STOP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_DISABLE</name> + <description>Disable RADIO</description> + <addressOffset>0x010</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_DISABLE</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_RSSISTART</name> + <description>Start the RSSI and take one single sample of the receive signal strength.</description> + <addressOffset>0x014</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_RSSISTART</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_RSSISTOP</name> + <description>Stop the RSSI measurement</description> + <addressOffset>0x018</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_RSSISTOP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_BCSTART</name> + <description>Start the bit counter</description> + <addressOffset>0x01C</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_BCSTART</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_BCSTOP</name> + <description>Stop the bit counter</description> + <addressOffset>0x020</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_BCSTOP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_READY</name> + <description>RADIO has ramped up and is ready to be started</description> + <addressOffset>0x100</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_READY</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_ADDRESS</name> + <description>Address sent or received</description> + <addressOffset>0x104</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_ADDRESS</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_PAYLOAD</name> + <description>Packet payload sent or received</description> + <addressOffset>0x108</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_PAYLOAD</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_END</name> + <description>Packet sent or received</description> + <addressOffset>0x10C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_END</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_DISABLED</name> + <description>RADIO has been disabled</description> + <addressOffset>0x110</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_DISABLED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_DEVMATCH</name> + <description>A device address match occurred on the last received packet</description> + <addressOffset>0x114</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_DEVMATCH</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_DEVMISS</name> + <description>No device address match occurred on the last received packet</description> + <addressOffset>0x118</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_DEVMISS</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_RSSIEND</name> + <description>Sampling of receive signal strength complete.</description> + <addressOffset>0x11C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_RSSIEND</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_BCMATCH</name> + <description>Bit counter reached bit count value.</description> + <addressOffset>0x128</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_BCMATCH</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_CRCOK</name> + <description>Packet received with CRC ok</description> + <addressOffset>0x130</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_CRCOK</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_CRCERROR</name> + <description>Packet received with CRC error</description> + <addressOffset>0x134</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_CRCERROR</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>SHORTS</name> + <description>Shortcut register</description> + <addressOffset>0x200</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>READY_START</name> + <description>Shortcut between READY event and START task</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>END_DISABLE</name> + <description>Shortcut between END event and DISABLE task</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DISABLED_TXEN</name> + <description>Shortcut between DISABLED event and TXEN task</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DISABLED_RXEN</name> + <description>Shortcut between DISABLED event and RXEN task</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ADDRESS_RSSISTART</name> + <description>Shortcut between ADDRESS event and RSSISTART task</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>END_START</name> + <description>Shortcut between END event and START task</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ADDRESS_BCSTART</name> + <description>Shortcut between ADDRESS event and BCSTART task</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DISABLED_RSSISTOP</name> + <description>Shortcut between DISABLED event and RSSISTOP task</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>READY</name> + <description>Write '1' to Enable interrupt for READY event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ADDRESS</name> + <description>Write '1' to Enable interrupt for ADDRESS event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PAYLOAD</name> + <description>Write '1' to Enable interrupt for PAYLOAD event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>END</name> + <description>Write '1' to Enable interrupt for END event</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DISABLED</name> + <description>Write '1' to Enable interrupt for DISABLED event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DEVMATCH</name> + <description>Write '1' to Enable interrupt for DEVMATCH event</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DEVMISS</name> + <description>Write '1' to Enable interrupt for DEVMISS event</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RSSIEND</name> + <description>Write '1' to Enable interrupt for RSSIEND event</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>BCMATCH</name> + <description>Write '1' to Enable interrupt for BCMATCH event</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CRCOK</name> + <description>Write '1' to Enable interrupt for CRCOK event</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CRCERROR</name> + <description>Write '1' to Enable interrupt for CRCERROR event</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>READY</name> + <description>Write '1' to Disable interrupt for READY event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ADDRESS</name> + <description>Write '1' to Disable interrupt for ADDRESS event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PAYLOAD</name> + <description>Write '1' to Disable interrupt for PAYLOAD event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>END</name> + <description>Write '1' to Disable interrupt for END event</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DISABLED</name> + <description>Write '1' to Disable interrupt for DISABLED event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DEVMATCH</name> + <description>Write '1' to Disable interrupt for DEVMATCH event</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DEVMISS</name> + <description>Write '1' to Disable interrupt for DEVMISS event</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RSSIEND</name> + <description>Write '1' to Disable interrupt for RSSIEND event</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>BCMATCH</name> + <description>Write '1' to Disable interrupt for BCMATCH event</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CRCOK</name> + <description>Write '1' to Disable interrupt for CRCOK event</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CRCERROR</name> + <description>Write '1' to Disable interrupt for CRCERROR event</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>CRCSTATUS</name> + <description>CRC status</description> + <addressOffset>0x400</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>CRCSTATUS</name> + <description>CRC status of packet received</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>CRCError</name> + <description>Packet received with CRC error</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>CRCOk</name> + <description>Packet received with CRC ok</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>RXMATCH</name> + <description>Received address</description> + <addressOffset>0x408</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>RXMATCH</name> + <description>Received address</description> + <lsb>0</lsb> + <msb>2</msb> + </field> + </fields> + </register> + <register> + <name>RXCRC</name> + <description>CRC field of previously received packet</description> + <addressOffset>0x40C</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>RXCRC</name> + <description>CRC field of previously received packet</description> + <lsb>0</lsb> + <msb>23</msb> + </field> + </fields> + </register> + <register> + <name>DAI</name> + <description>Device address match index</description> + <addressOffset>0x410</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>DAI</name> + <description>Device address match index</description> + <lsb>0</lsb> + <msb>2</msb> + </field> + </fields> + </register> + <register> + <name>PACKETPTR</name> + <description>Packet pointer</description> + <addressOffset>0x504</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>PACKETPTR</name> + <description>Packet pointer</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>FREQUENCY</name> + <description>Frequency</description> + <addressOffset>0x508</addressOffset> + <access>read-write</access> + <resetValue>0x00000002</resetValue> + <fields> + <field> + <name>FREQUENCY</name> + <description>Radio channel frequency</description> + <lsb>0</lsb> + <msb>6</msb> + </field> + <field> + <name>MAP</name> + <description>Channel map selection.</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <enumeratedValue> + <name>Default</name> + <description>Channel map between 2400 MHZ .. 2500 MHz</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Low</name> + <description>Channel map between 2360 MHZ .. 2460 MHz</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>TXPOWER</name> + <description>Output power</description> + <addressOffset>0x50C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>TXPOWER</name> + <description>RADIO output power.</description> + <lsb>0</lsb> + <msb>7</msb> + <enumeratedValues> + <enumeratedValue> + <name>Pos4dBm</name> + <description>+4 dBm</description> + <value>0x04</value> + </enumeratedValue> + <enumeratedValue> + <name>Pos3dBm</name> + <description>+3 dBm</description> + <value>0x03</value> + </enumeratedValue> + <enumeratedValue> + <name>0dBm</name> + <description>0 dBm</description> + <value>0x00</value> + </enumeratedValue> + <enumeratedValue> + <name>Neg4dBm</name> + <description>-4 dBm</description> + <value>0xFC</value> + </enumeratedValue> + <enumeratedValue> + <name>Neg8dBm</name> + <description>-8 dBm</description> + <value>0xF8</value> + </enumeratedValue> + <enumeratedValue> + <name>Neg12dBm</name> + <description>-12 dBm</description> + <value>0xF4</value> + </enumeratedValue> + <enumeratedValue> + <name>Neg16dBm</name> + <description>-16 dBm</description> + <value>0xF0</value> + </enumeratedValue> + <enumeratedValue> + <name>Neg20dBm</name> + <description>-20 dBm</description> + <value>0xEC</value> + </enumeratedValue> + <enumeratedValue> + <name>Neg30dBm</name> + <description>Deprecated enumerator - -40 dBm</description> + <value>0xD8</value> + </enumeratedValue> + <enumeratedValue> + <name>Neg40dBm</name> + <description>-40 dBm</description> + <value>0xD8</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>MODE</name> + <description>Data rate and modulation</description> + <addressOffset>0x510</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>MODE</name> + <description>Radio data rate and modulation setting. The radio supports Frequency-shift Keying (FSK) modulation.</description> + <lsb>0</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Nrf_1Mbit</name> + <description>1 Mbit/s Nordic proprietary radio mode</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Nrf_2Mbit</name> + <description>2 Mbit/s Nordic proprietary radio mode</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Ble_1Mbit</name> + <description>1 Mbit/s Bluetooth Low Energy</description> + <value>3</value> + </enumeratedValue> + <enumeratedValue> + <name>Ble_2Mbit</name> + <description>2 Mbit/s Bluetooth Low Energy</description> + <value>4</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>PCNF0</name> + <description>Packet configuration register 0</description> + <addressOffset>0x514</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>LFLEN</name> + <description>Length on air of LENGTH field in number of bits.</description> + <lsb>0</lsb> + <msb>3</msb> + </field> + <field> + <name>S0LEN</name> + <description>Length on air of S0 field in number of bytes.</description> + <lsb>8</lsb> + <msb>8</msb> + </field> + <field> + <name>S1LEN</name> + <description>Length on air of S1 field in number of bits.</description> + <lsb>16</lsb> + <msb>19</msb> + </field> + <field> + <name>S1INCL</name> + <description>Include or exclude S1 field in RAM</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <enumeratedValue> + <name>Automatic</name> + <description>Include S1 field in RAM only if S1LEN &gt; 0</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Include</name> + <description>Always include S1 field in RAM independent of S1LEN</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PLEN</name> + <description>Length of preamble on air. Decision point: TASKS_START task</description> + <lsb>24</lsb> + <msb>24</msb> + <enumeratedValues> + <enumeratedValue> + <name>8bit</name> + <description>8-bit preamble</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>16bit</name> + <description>16-bit preamble</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>PCNF1</name> + <description>Packet configuration register 1</description> + <addressOffset>0x518</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>MAXLEN</name> + <description>Maximum length of packet payload. If the packet payload is larger than MAXLEN, the radio will truncate the payload to MAXLEN.</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + <field> + <name>STATLEN</name> + <description>Static length in number of bytes</description> + <lsb>8</lsb> + <msb>15</msb> + </field> + <field> + <name>BALEN</name> + <description>Base address length in number of bytes</description> + <lsb>16</lsb> + <msb>18</msb> + </field> + <field> + <name>ENDIAN</name> + <description>On air endianness of packet, this applies to the S0, LENGTH, S1 and the PAYLOAD fields.</description> + <lsb>24</lsb> + <msb>24</msb> + <enumeratedValues> + <enumeratedValue> + <name>Little</name> + <description>Least Significant bit on air first</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Big</name> + <description>Most significant bit on air first</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>WHITEEN</name> + <description>Enable or disable packet whitening</description> + <lsb>25</lsb> + <msb>25</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>BASE0</name> + <description>Base address 0</description> + <addressOffset>0x51C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>BASE0</name> + <description>Base address 0</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>BASE1</name> + <description>Base address 1</description> + <addressOffset>0x520</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>BASE1</name> + <description>Base address 1</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>PREFIX0</name> + <description>Prefixes bytes for logical addresses 0-3</description> + <addressOffset>0x524</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>AP0</name> + <description>Address prefix 0.</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + <field> + <name>AP1</name> + <description>Address prefix 1.</description> + <lsb>8</lsb> + <msb>15</msb> + </field> + <field> + <name>AP2</name> + <description>Address prefix 2.</description> + <lsb>16</lsb> + <msb>23</msb> + </field> + <field> + <name>AP3</name> + <description>Address prefix 3.</description> + <lsb>24</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>PREFIX1</name> + <description>Prefixes bytes for logical addresses 4-7</description> + <addressOffset>0x528</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>AP4</name> + <description>Address prefix 4.</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + <field> + <name>AP5</name> + <description>Address prefix 5.</description> + <lsb>8</lsb> + <msb>15</msb> + </field> + <field> + <name>AP6</name> + <description>Address prefix 6.</description> + <lsb>16</lsb> + <msb>23</msb> + </field> + <field> + <name>AP7</name> + <description>Address prefix 7.</description> + <lsb>24</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>TXADDRESS</name> + <description>Transmit address select</description> + <addressOffset>0x52C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>TXADDRESS</name> + <description>Transmit address select</description> + <lsb>0</lsb> + <msb>2</msb> + </field> + </fields> + </register> + <register> + <name>RXADDRESSES</name> + <description>Receive address select</description> + <addressOffset>0x530</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ADDR0</name> + <description>Enable or disable reception on logical address 0.</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ADDR1</name> + <description>Enable or disable reception on logical address 1.</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ADDR2</name> + <description>Enable or disable reception on logical address 2.</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ADDR3</name> + <description>Enable or disable reception on logical address 3.</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ADDR4</name> + <description>Enable or disable reception on logical address 4.</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ADDR5</name> + <description>Enable or disable reception on logical address 5.</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ADDR6</name> + <description>Enable or disable reception on logical address 6.</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ADDR7</name> + <description>Enable or disable reception on logical address 7.</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>CRCCNF</name> + <description>CRC configuration</description> + <addressOffset>0x534</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>LEN</name> + <description>CRC length in number of bytes.</description> + <lsb>0</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>CRC length is zero and CRC calculation is disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>One</name> + <description>CRC length is one byte and CRC calculation is enabled</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Two</name> + <description>CRC length is two bytes and CRC calculation is enabled</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>Three</name> + <description>CRC length is three bytes and CRC calculation is enabled</description> + <value>3</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SKIPADDR</name> + <description>Include or exclude packet address field out of CRC calculation.</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <enumeratedValue> + <name>Include</name> + <description>CRC calculation includes address field</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Skip</name> + <description>CRC calculation does not include address field. The CRC calculation will start at the first byte after the address.</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>CRCPOLY</name> + <description>CRC polynomial</description> + <addressOffset>0x538</addressOffset> + <access>read-write</access> + <resetValue>0x00000000</resetValue> + <fields> + <field> + <name>CRCPOLY</name> + <description>CRC polynomial</description> + <lsb>0</lsb> + <msb>23</msb> + </field> + </fields> + </register> + <register> + <name>CRCINIT</name> + <description>CRC initial value</description> + <addressOffset>0x53C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>CRCINIT</name> + <description>CRC initial value</description> + <lsb>0</lsb> + <msb>23</msb> + </field> + </fields> + </register> + <register> + <name>UNUSED0</name> + <description>Unspecified</description> + <addressOffset>0x540</addressOffset> + <access>read-write</access> + </register> + <register> + <name>TIFS</name> + <description>Inter Frame Spacing in us</description> + <addressOffset>0x544</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>TIFS</name> + <description>Inter Frame Spacing in us</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + </fields> + </register> + <register> + <name>RSSISAMPLE</name> + <description>RSSI sample</description> + <addressOffset>0x548</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>RSSISAMPLE</name> + <description>RSSI sample</description> + <lsb>0</lsb> + <msb>6</msb> + </field> + </fields> + </register> + <register> + <name>STATE</name> + <description>Current radio state</description> + <addressOffset>0x550</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>STATE</name> + <description>Current radio state</description> + <lsb>0</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>RADIO is in the Disabled state</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>RxRu</name> + <description>RADIO is in the RXRU state</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>RxIdle</name> + <description>RADIO is in the RXIDLE state</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>Rx</name> + <description>RADIO is in the RX state</description> + <value>3</value> + </enumeratedValue> + <enumeratedValue> + <name>RxDisable</name> + <description>RADIO is in the RXDISABLED state</description> + <value>4</value> + </enumeratedValue> + <enumeratedValue> + <name>TxRu</name> + <description>RADIO is in the TXRU state</description> + <value>9</value> + </enumeratedValue> + <enumeratedValue> + <name>TxIdle</name> + <description>RADIO is in the TXIDLE state</description> + <value>10</value> + </enumeratedValue> + <enumeratedValue> + <name>Tx</name> + <description>RADIO is in the TX state</description> + <value>11</value> + </enumeratedValue> + <enumeratedValue> + <name>TxDisable</name> + <description>RADIO is in the TXDISABLED state</description> + <value>12</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>DATAWHITEIV</name> + <description>Data whitening initial value</description> + <addressOffset>0x554</addressOffset> + <access>read-write</access> + <resetValue>0x00000040</resetValue> + <fields> + <field> + <name>DATAWHITEIV</name> + <description>Data whitening initial value. Bit 6 is hard-wired to '1', writing '0' to it has no effect, and it will always be read back and used by the device as '1'.</description> + <lsb>0</lsb> + <msb>6</msb> + </field> + </fields> + </register> + <register> + <name>BCC</name> + <description>Bit counter compare</description> + <addressOffset>0x560</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>BCC</name> + <description>Bit counter compare</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <dim>8</dim> + <dimIncrement>4</dimIncrement> + <name>DAB[%s]</name> + <description>Description collection[0]: Device address base segment 0</description> + <addressOffset>0x600</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>DAB</name> + <description>Device address base segment 0</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <dim>8</dim> + <dimIncrement>4</dimIncrement> + <name>DAP[%s]</name> + <description>Description collection[0]: Device address prefix 0</description> + <addressOffset>0x620</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>DAP</name> + <description>Device address prefix 0</description> + <lsb>0</lsb> + <msb>15</msb> + </field> + </fields> + </register> + <register> + <name>DACNF</name> + <description>Device address match configuration</description> + <addressOffset>0x640</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ENA0</name> + <description>Enable or disable device address matching using device address 0</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENA1</name> + <description>Enable or disable device address matching using device address 1</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENA2</name> + <description>Enable or disable device address matching using device address 2</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENA3</name> + <description>Enable or disable device address matching using device address 3</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENA4</name> + <description>Enable or disable device address matching using device address 4</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENA5</name> + <description>Enable or disable device address matching using device address 5</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENA6</name> + <description>Enable or disable device address matching using device address 6</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENA7</name> + <description>Enable or disable device address matching using device address 7</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TXADD0</name> + <description>TxAdd for device address 0</description> + <lsb>8</lsb> + <msb>8</msb> + </field> + <field> + <name>TXADD1</name> + <description>TxAdd for device address 1</description> + <lsb>9</lsb> + <msb>9</msb> + </field> + <field> + <name>TXADD2</name> + <description>TxAdd for device address 2</description> + <lsb>10</lsb> + <msb>10</msb> + </field> + <field> + <name>TXADD3</name> + <description>TxAdd for device address 3</description> + <lsb>11</lsb> + <msb>11</msb> + </field> + <field> + <name>TXADD4</name> + <description>TxAdd for device address 4</description> + <lsb>12</lsb> + <msb>12</msb> + </field> + <field> + <name>TXADD5</name> + <description>TxAdd for device address 5</description> + <lsb>13</lsb> + <msb>13</msb> + </field> + <field> + <name>TXADD6</name> + <description>TxAdd for device address 6</description> + <lsb>14</lsb> + <msb>14</msb> + </field> + <field> + <name>TXADD7</name> + <description>TxAdd for device address 7</description> + <lsb>15</lsb> + <msb>15</msb> + </field> + </fields> + </register> + <register> + <name>MODECNF0</name> + <description>Radio mode configuration register 0</description> + <addressOffset>0x650</addressOffset> + <access>read-write</access> + <resetValue>0x00000200</resetValue> + <fields> + <field> + <name>RU</name> + <description>Radio ramp-up time</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Default</name> + <description>Default ramp-up time (tRXEN), compatible with firmware written for nRF51</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Fast</name> + <description>Fast ramp-up (tRXEN,FAST), see electrical specification for more information</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DTX</name> + <description>Default TX value</description> + <lsb>8</lsb> + <msb>9</msb> + <enumeratedValues> + <enumeratedValue> + <name>B1</name> + <description>Transmit '1'</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>B0</name> + <description>Transmit '0'</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Center</name> + <description>Transmit center frequency</description> + <value>2</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>POWER</name> + <description>Peripheral power control</description> + <addressOffset>0xFFC</addressOffset> + <access>read-write</access> + <resetValue>0x00000001</resetValue> + <fields> + <field> + <name>POWER</name> + <description>Peripheral power control. The peripheral and its registers will be reset to its initial state by switching the peripheral off and then back on again.</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Peripheral is powered off</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Peripheral is powered on</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </registers> + </peripheral> + <peripheral> + <name>UARTE0</name> + <description>UART with EasyDMA</description> + <groupName>UARTE</groupName> + <baseAddress>0x40002000</baseAddress> + <size>32</size> + <headerStructName>UARTE</headerStructName> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>UARTE0</name> + <value>2</value> + </interrupt> + <registers> + <register> + <name>TASKS_STARTRX</name> + <description>Start UART receiver</description> + <addressOffset>0x000</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STARTRX</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_STOPRX</name> + <description>Stop UART receiver</description> + <addressOffset>0x004</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STOPRX</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_STARTTX</name> + <description>Start UART transmitter</description> + <addressOffset>0x008</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STARTTX</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_STOPTX</name> + <description>Stop UART transmitter</description> + <addressOffset>0x00C</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STOPTX</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_FLUSHRX</name> + <description>Flush RX FIFO into RX buffer</description> + <addressOffset>0x02C</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_FLUSHRX</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_CTS</name> + <description>CTS is activated (set low). Clear To Send.</description> + <addressOffset>0x100</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_CTS</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_NCTS</name> + <description>CTS is deactivated (set high). Not Clear To Send.</description> + <addressOffset>0x104</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_NCTS</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_RXDRDY</name> + <description>Data received in RXD (but potentially not yet transferred to Data RAM)</description> + <addressOffset>0x108</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_RXDRDY</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_ENDRX</name> + <description>Receive buffer is filled up</description> + <addressOffset>0x110</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_ENDRX</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_TXDRDY</name> + <description>Data sent from TXD</description> + <addressOffset>0x11C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_TXDRDY</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_ENDTX</name> + <description>Last TX byte transmitted</description> + <addressOffset>0x120</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_ENDTX</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_ERROR</name> + <description>Error detected</description> + <addressOffset>0x124</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_ERROR</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_RXTO</name> + <description>Receiver timeout</description> + <addressOffset>0x144</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_RXTO</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_RXSTARTED</name> + <description>UART receiver has started</description> + <addressOffset>0x14C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_RXSTARTED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_TXSTARTED</name> + <description>UART transmitter has started</description> + <addressOffset>0x150</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_TXSTARTED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_TXSTOPPED</name> + <description>Transmitter stopped</description> + <addressOffset>0x158</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_TXSTOPPED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>SHORTS</name> + <description>Shortcut register</description> + <addressOffset>0x200</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ENDRX_STARTRX</name> + <description>Shortcut between ENDRX event and STARTRX task</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENDRX_STOPRX</name> + <description>Shortcut between ENDRX event and STOPRX task</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTEN</name> + <description>Enable or disable interrupt</description> + <addressOffset>0x300</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>CTS</name> + <description>Enable or disable interrupt for CTS event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>NCTS</name> + <description>Enable or disable interrupt for NCTS event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RXDRDY</name> + <description>Enable or disable interrupt for RXDRDY event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENDRX</name> + <description>Enable or disable interrupt for ENDRX event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TXDRDY</name> + <description>Enable or disable interrupt for TXDRDY event</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENDTX</name> + <description>Enable or disable interrupt for ENDTX event</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ERROR</name> + <description>Enable or disable interrupt for ERROR event</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RXTO</name> + <description>Enable or disable interrupt for RXTO event</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RXSTARTED</name> + <description>Enable or disable interrupt for RXSTARTED event</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TXSTARTED</name> + <description>Enable or disable interrupt for TXSTARTED event</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TXSTOPPED</name> + <description>Enable or disable interrupt for TXSTOPPED event</description> + <lsb>22</lsb> + <msb>22</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>CTS</name> + <description>Write '1' to Enable interrupt for CTS event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>NCTS</name> + <description>Write '1' to Enable interrupt for NCTS event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RXDRDY</name> + <description>Write '1' to Enable interrupt for RXDRDY event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENDRX</name> + <description>Write '1' to Enable interrupt for ENDRX event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TXDRDY</name> + <description>Write '1' to Enable interrupt for TXDRDY event</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENDTX</name> + <description>Write '1' to Enable interrupt for ENDTX event</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ERROR</name> + <description>Write '1' to Enable interrupt for ERROR event</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RXTO</name> + <description>Write '1' to Enable interrupt for RXTO event</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RXSTARTED</name> + <description>Write '1' to Enable interrupt for RXSTARTED event</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TXSTARTED</name> + <description>Write '1' to Enable interrupt for TXSTARTED event</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TXSTOPPED</name> + <description>Write '1' to Enable interrupt for TXSTOPPED event</description> + <lsb>22</lsb> + <msb>22</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>CTS</name> + <description>Write '1' to Disable interrupt for CTS event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>NCTS</name> + <description>Write '1' to Disable interrupt for NCTS event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RXDRDY</name> + <description>Write '1' to Disable interrupt for RXDRDY event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENDRX</name> + <description>Write '1' to Disable interrupt for ENDRX event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TXDRDY</name> + <description>Write '1' to Disable interrupt for TXDRDY event</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENDTX</name> + <description>Write '1' to Disable interrupt for ENDTX event</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ERROR</name> + <description>Write '1' to Disable interrupt for ERROR event</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RXTO</name> + <description>Write '1' to Disable interrupt for RXTO event</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RXSTARTED</name> + <description>Write '1' to Disable interrupt for RXSTARTED event</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TXSTARTED</name> + <description>Write '1' to Disable interrupt for TXSTARTED event</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TXSTOPPED</name> + <description>Write '1' to Disable interrupt for TXSTOPPED event</description> + <lsb>22</lsb> + <msb>22</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>ERRORSRC</name> + <description>Error source Note : this register is read / write one to clear.</description> + <addressOffset>0x480</addressOffset> + <access>read-write</access> + <modifiedWriteValues>oneToClear</modifiedWriteValues> + <fields> + <field> + <name>OVERRUN</name> + <description>Overrun error</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>NotPresent</name> + <description>Read: error not present</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Present</name> + <description>Read: error present</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PARITY</name> + <description>Parity error</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>NotPresent</name> + <description>Read: error not present</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Present</name> + <description>Read: error present</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>FRAMING</name> + <description>Framing error occurred</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>NotPresent</name> + <description>Read: error not present</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Present</name> + <description>Read: error present</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>BREAK</name> + <description>Break condition</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>NotPresent</name> + <description>Read: error not present</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Present</name> + <description>Read: error present</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>ENABLE</name> + <description>Enable UART</description> + <addressOffset>0x500</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ENABLE</name> + <description>Enable or disable UARTE</description> + <lsb>0</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable UARTE</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable UARTE</description> + <value>8</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <cluster> + <name>PSEL</name> + <description>Unspecified</description> + <headerStructName>UARTE_PSEL</headerStructName> + <addressOffset>0x508</addressOffset> + <register> + <name>RTS</name> + <description>Pin select for RTS signal</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>Pin number</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>TXD</name> + <description>Pin select for TXD signal</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>Pin number</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>CTS</name> + <description>Pin select for CTS signal</description> + <addressOffset>0x008</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>Pin number</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>RXD</name> + <description>Pin select for RXD signal</description> + <addressOffset>0x00C</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>Pin number</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </cluster> + <register> + <name>BAUDRATE</name> + <description>Baud rate. Accuracy depends on the HFCLK source selected.</description> + <addressOffset>0x524</addressOffset> + <access>read-write</access> + <resetValue>0x04000000</resetValue> + <fields> + <field> + <name>BAUDRATE</name> + <description>Baud rate</description> + <lsb>0</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Baud1200</name> + <description>1200 baud (actual rate: 1205)</description> + <value>0x0004F000</value> + </enumeratedValue> + <enumeratedValue> + <name>Baud2400</name> + <description>2400 baud (actual rate: 2396)</description> + <value>0x0009D000</value> + </enumeratedValue> + <enumeratedValue> + <name>Baud4800</name> + <description>4800 baud (actual rate: 4808)</description> + <value>0x0013B000</value> + </enumeratedValue> + <enumeratedValue> + <name>Baud9600</name> + <description>9600 baud (actual rate: 9598)</description> + <value>0x00275000</value> + </enumeratedValue> + <enumeratedValue> + <name>Baud14400</name> + <description>14400 baud (actual rate: 14401)</description> + <value>0x003AF000</value> + </enumeratedValue> + <enumeratedValue> + <name>Baud19200</name> + <description>19200 baud (actual rate: 19208)</description> + <value>0x004EA000</value> + </enumeratedValue> + <enumeratedValue> + <name>Baud28800</name> + <description>28800 baud (actual rate: 28777)</description> + <value>0x0075C000</value> + </enumeratedValue> + <enumeratedValue> + <name>Baud31250</name> + <description>31250 baud</description> + <value>0x00800000</value> + </enumeratedValue> + <enumeratedValue> + <name>Baud38400</name> + <description>38400 baud (actual rate: 38369)</description> + <value>0x009D0000</value> + </enumeratedValue> + <enumeratedValue> + <name>Baud56000</name> + <description>56000 baud (actual rate: 55944)</description> + <value>0x00E50000</value> + </enumeratedValue> + <enumeratedValue> + <name>Baud57600</name> + <description>57600 baud (actual rate: 57554)</description> + <value>0x00EB0000</value> + </enumeratedValue> + <enumeratedValue> + <name>Baud76800</name> + <description>76800 baud (actual rate: 76923)</description> + <value>0x013A9000</value> + </enumeratedValue> + <enumeratedValue> + <name>Baud115200</name> + <description>115200 baud (actual rate: 115108)</description> + <value>0x01D60000</value> + </enumeratedValue> + <enumeratedValue> + <name>Baud230400</name> + <description>230400 baud (actual rate: 231884)</description> + <value>0x03B00000</value> + </enumeratedValue> + <enumeratedValue> + <name>Baud250000</name> + <description>250000 baud</description> + <value>0x04000000</value> + </enumeratedValue> + <enumeratedValue> + <name>Baud460800</name> + <description>460800 baud (actual rate: 457143)</description> + <value>0x07400000</value> + </enumeratedValue> + <enumeratedValue> + <name>Baud921600</name> + <description>921600 baud (actual rate: 941176)</description> + <value>0x0F000000</value> + </enumeratedValue> + <enumeratedValue> + <name>Baud1M</name> + <description>1Mega baud</description> + <value>0x10000000</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <cluster> + <name>RXD</name> + <description>RXD EasyDMA channel</description> + <headerStructName>UARTE_RXD</headerStructName> + <addressOffset>0x534</addressOffset> + <register> + <name>PTR</name> + <description>Data pointer</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>PTR</name> + <description>Data pointer</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>MAXCNT</name> + <description>Maximum number of bytes in receive buffer</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>MAXCNT</name> + <description>Maximum number of bytes in receive buffer</description> + <lsb>0</lsb> + <msb>9</msb> + </field> + </fields> + </register> + <register> + <name>AMOUNT</name> + <description>Number of bytes transferred in the last transaction</description> + <addressOffset>0x008</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>AMOUNT</name> + <description>Number of bytes transferred in the last transaction</description> + <lsb>0</lsb> + <msb>9</msb> + </field> + </fields> + </register> + </cluster> + <cluster> + <name>TXD</name> + <description>TXD EasyDMA channel</description> + <headerStructName>UARTE_TXD</headerStructName> + <addressOffset>0x544</addressOffset> + <register> + <name>PTR</name> + <description>Data pointer</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>PTR</name> + <description>Data pointer</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>MAXCNT</name> + <description>Maximum number of bytes in transmit buffer</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>MAXCNT</name> + <description>Maximum number of bytes in transmit buffer</description> + <lsb>0</lsb> + <msb>9</msb> + </field> + </fields> + </register> + <register> + <name>AMOUNT</name> + <description>Number of bytes transferred in the last transaction</description> + <addressOffset>0x008</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>AMOUNT</name> + <description>Number of bytes transferred in the last transaction</description> + <lsb>0</lsb> + <msb>9</msb> + </field> + </fields> + </register> + </cluster> + <register> + <name>CONFIG</name> + <description>Configuration of parity and hardware flow control</description> + <addressOffset>0x56C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>HWFC</name> + <description>Hardware flow control</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PARITY</name> + <description>Parity</description> + <lsb>1</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude parity bit</description> + <value>0x0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include even parity bit</description> + <value>0x7</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>STOP</name> + <description>Stop bits</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>One</name> + <description>One stop bit</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Two</name> + <description>Two stop bits</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </registers> + </peripheral> + <peripheral> + <name>TWIM0</name> + <description>I2C compatible Two-Wire Master Interface with EasyDMA</description> + <groupName>TWIM</groupName> + <baseAddress>0x40003000</baseAddress> + <size>32</size> + <headerStructName>TWIM</headerStructName> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>TWIM0_TWIS0</name> + <value>3</value> + </interrupt> + <registers> + <register> + <name>TASKS_STARTRX</name> + <description>Start TWI receive sequence</description> + <addressOffset>0x000</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STARTRX</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_STARTTX</name> + <description>Start TWI transmit sequence</description> + <addressOffset>0x008</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STARTTX</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_STOP</name> + <description>Stop TWI transaction. Must be issued while the TWI master is not suspended.</description> + <addressOffset>0x014</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STOP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_SUSPEND</name> + <description>Suspend TWI transaction</description> + <addressOffset>0x01C</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_SUSPEND</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_RESUME</name> + <description>Resume TWI transaction</description> + <addressOffset>0x020</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_RESUME</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_STOPPED</name> + <description>TWI stopped</description> + <addressOffset>0x104</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_STOPPED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_ERROR</name> + <description>TWI error</description> + <addressOffset>0x124</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_ERROR</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_SUSPENDED</name> + <description>Last byte has been sent out after the SUSPEND task has been issued, TWI traffic is now suspended.</description> + <addressOffset>0x148</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_SUSPENDED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_RXSTARTED</name> + <description>Receive sequence started</description> + <addressOffset>0x14C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_RXSTARTED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_TXSTARTED</name> + <description>Transmit sequence started</description> + <addressOffset>0x150</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_TXSTARTED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_LASTRX</name> + <description>Byte boundary, starting to receive the last byte</description> + <addressOffset>0x15C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_LASTRX</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_LASTTX</name> + <description>Byte boundary, starting to transmit the last byte</description> + <addressOffset>0x160</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_LASTTX</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>SHORTS</name> + <description>Shortcut register</description> + <addressOffset>0x200</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>LASTTX_STARTRX</name> + <description>Shortcut between LASTTX event and STARTRX task</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>LASTTX_SUSPEND</name> + <description>Shortcut between LASTTX event and SUSPEND task</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>LASTTX_STOP</name> + <description>Shortcut between LASTTX event and STOP task</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>LASTRX_STARTTX</name> + <description>Shortcut between LASTRX event and STARTTX task</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>LASTRX_SUSPEND</name> + <description>Shortcut between LASTRX event and SUSPEND task</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>LASTRX_STOP</name> + <description>Shortcut between LASTRX event and STOP task</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTEN</name> + <description>Enable or disable interrupt</description> + <addressOffset>0x300</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>STOPPED</name> + <description>Enable or disable interrupt for STOPPED event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ERROR</name> + <description>Enable or disable interrupt for ERROR event</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SUSPENDED</name> + <description>Enable or disable interrupt for SUSPENDED event</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RXSTARTED</name> + <description>Enable or disable interrupt for RXSTARTED event</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TXSTARTED</name> + <description>Enable or disable interrupt for TXSTARTED event</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>LASTRX</name> + <description>Enable or disable interrupt for LASTRX event</description> + <lsb>23</lsb> + <msb>23</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>LASTTX</name> + <description>Enable or disable interrupt for LASTTX event</description> + <lsb>24</lsb> + <msb>24</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>STOPPED</name> + <description>Write '1' to Enable interrupt for STOPPED event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ERROR</name> + <description>Write '1' to Enable interrupt for ERROR event</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SUSPENDED</name> + <description>Write '1' to Enable interrupt for SUSPENDED event</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RXSTARTED</name> + <description>Write '1' to Enable interrupt for RXSTARTED event</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TXSTARTED</name> + <description>Write '1' to Enable interrupt for TXSTARTED event</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>LASTRX</name> + <description>Write '1' to Enable interrupt for LASTRX event</description> + <lsb>23</lsb> + <msb>23</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>LASTTX</name> + <description>Write '1' to Enable interrupt for LASTTX event</description> + <lsb>24</lsb> + <msb>24</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>STOPPED</name> + <description>Write '1' to Disable interrupt for STOPPED event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ERROR</name> + <description>Write '1' to Disable interrupt for ERROR event</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SUSPENDED</name> + <description>Write '1' to Disable interrupt for SUSPENDED event</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RXSTARTED</name> + <description>Write '1' to Disable interrupt for RXSTARTED event</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TXSTARTED</name> + <description>Write '1' to Disable interrupt for TXSTARTED event</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>LASTRX</name> + <description>Write '1' to Disable interrupt for LASTRX event</description> + <lsb>23</lsb> + <msb>23</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>LASTTX</name> + <description>Write '1' to Disable interrupt for LASTTX event</description> + <lsb>24</lsb> + <msb>24</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>ERRORSRC</name> + <description>Error source</description> + <addressOffset>0x4C4</addressOffset> + <access>read-write</access> + <modifiedWriteValues>oneToClear</modifiedWriteValues> + <fields> + <field> + <name>OVERRUN</name> + <description>Overrun error</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotReceived</name> + <description>Error did not occur</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Received</name> + <description>Error occurred</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ANACK</name> + <description>NACK received after sending the address (write '1' to clear)</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotReceived</name> + <description>Error did not occur</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Received</name> + <description>Error occurred</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DNACK</name> + <description>NACK received after sending a data byte (write '1' to clear)</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotReceived</name> + <description>Error did not occur</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Received</name> + <description>Error occurred</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>ENABLE</name> + <description>Enable TWIM</description> + <addressOffset>0x500</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ENABLE</name> + <description>Enable or disable TWIM</description> + <lsb>0</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable TWIM</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable TWIM</description> + <value>6</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <cluster> + <name>PSEL</name> + <description>Unspecified</description> + <headerStructName>TWIM_PSEL</headerStructName> + <addressOffset>0x508</addressOffset> + <register> + <name>SCL</name> + <description>Pin select for SCL signal</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>Pin number</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>SDA</name> + <description>Pin select for SDA signal</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>Pin number</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </cluster> + <register> + <name>FREQUENCY</name> + <description>TWI frequency. Accuracy depends on the HFCLK source selected.</description> + <addressOffset>0x524</addressOffset> + <access>read-write</access> + <resetValue>0x04000000</resetValue> + <fields> + <field> + <name>FREQUENCY</name> + <description>TWI master clock frequency</description> + <lsb>0</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>K100</name> + <description>100 kbps</description> + <value>0x01980000</value> + </enumeratedValue> + <enumeratedValue> + <name>K250</name> + <description>250 kbps</description> + <value>0x04000000</value> + </enumeratedValue> + <enumeratedValue> + <name>K400</name> + <description>400 kbps</description> + <value>0x06400000</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <cluster> + <name>RXD</name> + <description>RXD EasyDMA channel</description> + <headerStructName>TWIM_RXD</headerStructName> + <addressOffset>0x534</addressOffset> + <register> + <name>PTR</name> + <description>Data pointer</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>PTR</name> + <description>Data pointer</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>MAXCNT</name> + <description>Maximum number of bytes in receive buffer</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>MAXCNT</name> + <description>Maximum number of bytes in receive buffer</description> + <lsb>0</lsb> + <msb>9</msb> + </field> + </fields> + </register> + <register> + <name>AMOUNT</name> + <description>Number of bytes transferred in the last transaction</description> + <addressOffset>0x008</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>AMOUNT</name> + <description>Number of bytes transferred in the last transaction. In case of NACK error, includes the NACK'ed byte.</description> + <lsb>0</lsb> + <msb>9</msb> + </field> + </fields> + </register> + <register> + <name>LIST</name> + <description>EasyDMA list type</description> + <addressOffset>0x00C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>LIST</name> + <description>List type</description> + <lsb>0</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable EasyDMA list</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>ArrayList</name> + <description>Use array list</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </cluster> + <cluster> + <name>TXD</name> + <description>TXD EasyDMA channel</description> + <headerStructName>TWIM_TXD</headerStructName> + <addressOffset>0x544</addressOffset> + <register> + <name>PTR</name> + <description>Data pointer</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>PTR</name> + <description>Data pointer</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>MAXCNT</name> + <description>Maximum number of bytes in transmit buffer</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>MAXCNT</name> + <description>Maximum number of bytes in transmit buffer</description> + <lsb>0</lsb> + <msb>9</msb> + </field> + </fields> + </register> + <register> + <name>AMOUNT</name> + <description>Number of bytes transferred in the last transaction</description> + <addressOffset>0x008</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>AMOUNT</name> + <description>Number of bytes transferred in the last transaction. In case of NACK error, includes the NACK'ed byte.</description> + <lsb>0</lsb> + <msb>9</msb> + </field> + </fields> + </register> + <register> + <name>LIST</name> + <description>EasyDMA list type</description> + <addressOffset>0x00C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>LIST</name> + <description>List type</description> + <lsb>0</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable EasyDMA list</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>ArrayList</name> + <description>Use array list</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </cluster> + <register> + <name>ADDRESS</name> + <description>Address used in the TWI transfer</description> + <addressOffset>0x588</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ADDRESS</name> + <description>Address used in the TWI transfer</description> + <lsb>0</lsb> + <msb>6</msb> + </field> + </fields> + </register> + </registers> + </peripheral> + <peripheral> + <name>TWIS0</name> + <description>I2C compatible Two-Wire Slave Interface with EasyDMA</description> + <groupName>TWIS</groupName> + <baseAddress>0x40003000</baseAddress> + <size>32</size> + <alternatePeripheral>TWIM0</alternatePeripheral> + <headerStructName>TWIS</headerStructName> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>TWIM0_TWIS0</name> + <value>3</value> + </interrupt> + <registers> + <register> + <name>TASKS_STOP</name> + <description>Stop TWI transaction</description> + <addressOffset>0x014</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STOP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_SUSPEND</name> + <description>Suspend TWI transaction</description> + <addressOffset>0x01C</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_SUSPEND</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_RESUME</name> + <description>Resume TWI transaction</description> + <addressOffset>0x020</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_RESUME</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_PREPARERX</name> + <description>Prepare the TWI slave to respond to a write command</description> + <addressOffset>0x030</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_PREPARERX</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_PREPARETX</name> + <description>Prepare the TWI slave to respond to a read command</description> + <addressOffset>0x034</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_PREPARETX</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_STOPPED</name> + <description>TWI stopped</description> + <addressOffset>0x104</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_STOPPED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_ERROR</name> + <description>TWI error</description> + <addressOffset>0x124</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_ERROR</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_RXSTARTED</name> + <description>Receive sequence started</description> + <addressOffset>0x14C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_RXSTARTED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_TXSTARTED</name> + <description>Transmit sequence started</description> + <addressOffset>0x150</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_TXSTARTED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_WRITE</name> + <description>Write command received</description> + <addressOffset>0x164</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_WRITE</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_READ</name> + <description>Read command received</description> + <addressOffset>0x168</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_READ</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>SHORTS</name> + <description>Shortcut register</description> + <addressOffset>0x200</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>WRITE_SUSPEND</name> + <description>Shortcut between WRITE event and SUSPEND task</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>READ_SUSPEND</name> + <description>Shortcut between READ event and SUSPEND task</description> + <lsb>14</lsb> + <msb>14</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTEN</name> + <description>Enable or disable interrupt</description> + <addressOffset>0x300</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>STOPPED</name> + <description>Enable or disable interrupt for STOPPED event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ERROR</name> + <description>Enable or disable interrupt for ERROR event</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RXSTARTED</name> + <description>Enable or disable interrupt for RXSTARTED event</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TXSTARTED</name> + <description>Enable or disable interrupt for TXSTARTED event</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>WRITE</name> + <description>Enable or disable interrupt for WRITE event</description> + <lsb>25</lsb> + <msb>25</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>READ</name> + <description>Enable or disable interrupt for READ event</description> + <lsb>26</lsb> + <msb>26</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>STOPPED</name> + <description>Write '1' to Enable interrupt for STOPPED event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ERROR</name> + <description>Write '1' to Enable interrupt for ERROR event</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RXSTARTED</name> + <description>Write '1' to Enable interrupt for RXSTARTED event</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TXSTARTED</name> + <description>Write '1' to Enable interrupt for TXSTARTED event</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>WRITE</name> + <description>Write '1' to Enable interrupt for WRITE event</description> + <lsb>25</lsb> + <msb>25</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>READ</name> + <description>Write '1' to Enable interrupt for READ event</description> + <lsb>26</lsb> + <msb>26</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>STOPPED</name> + <description>Write '1' to Disable interrupt for STOPPED event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ERROR</name> + <description>Write '1' to Disable interrupt for ERROR event</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RXSTARTED</name> + <description>Write '1' to Disable interrupt for RXSTARTED event</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TXSTARTED</name> + <description>Write '1' to Disable interrupt for TXSTARTED event</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>WRITE</name> + <description>Write '1' to Disable interrupt for WRITE event</description> + <lsb>25</lsb> + <msb>25</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>READ</name> + <description>Write '1' to Disable interrupt for READ event</description> + <lsb>26</lsb> + <msb>26</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>ERRORSRC</name> + <description>Error source</description> + <addressOffset>0x4D0</addressOffset> + <access>read-write</access> + <modifiedWriteValues>oneToClear</modifiedWriteValues> + <fields> + <field> + <name>OVERFLOW</name> + <description>RX buffer overflow detected, and prevented</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotDetected</name> + <description>Error did not occur</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Detected</name> + <description>Error occurred</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DNACK</name> + <description>NACK sent after receiving a data byte</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotReceived</name> + <description>Error did not occur</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Received</name> + <description>Error occurred</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>OVERREAD</name> + <description>TX buffer over-read detected, and prevented</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotDetected</name> + <description>Error did not occur</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Detected</name> + <description>Error occurred</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>MATCH</name> + <description>Status register indicating which address had a match</description> + <addressOffset>0x4D4</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>MATCH</name> + <description>Which of the addresses in {ADDRESS} matched the incoming address</description> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>ENABLE</name> + <description>Enable TWIS</description> + <addressOffset>0x500</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ENABLE</name> + <description>Enable or disable TWIS</description> + <lsb>0</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable TWIS</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable TWIS</description> + <value>9</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <cluster> + <name>PSEL</name> + <description>Unspecified</description> + <headerStructName>TWIS_PSEL</headerStructName> + <addressOffset>0x508</addressOffset> + <register> + <name>SCL</name> + <description>Pin select for SCL signal</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>Pin number</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>SDA</name> + <description>Pin select for SDA signal</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>Pin number</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </cluster> + <cluster> + <name>RXD</name> + <description>RXD EasyDMA channel</description> + <headerStructName>TWIS_RXD</headerStructName> + <addressOffset>0x534</addressOffset> + <register> + <name>PTR</name> + <description>RXD Data pointer</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>PTR</name> + <description>RXD Data pointer</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>MAXCNT</name> + <description>Maximum number of bytes in RXD buffer</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>MAXCNT</name> + <description>Maximum number of bytes in RXD buffer</description> + <lsb>0</lsb> + <msb>9</msb> + </field> + </fields> + </register> + <register> + <name>AMOUNT</name> + <description>Number of bytes transferred in the last RXD transaction</description> + <addressOffset>0x008</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>AMOUNT</name> + <description>Number of bytes transferred in the last RXD transaction</description> + <lsb>0</lsb> + <msb>9</msb> + </field> + </fields> + </register> + </cluster> + <cluster> + <name>TXD</name> + <description>TXD EasyDMA channel</description> + <headerStructName>TWIS_TXD</headerStructName> + <addressOffset>0x544</addressOffset> + <register> + <name>PTR</name> + <description>TXD Data pointer</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>PTR</name> + <description>TXD Data pointer</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>MAXCNT</name> + <description>Maximum number of bytes in TXD buffer</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>MAXCNT</name> + <description>Maximum number of bytes in TXD buffer</description> + <lsb>0</lsb> + <msb>9</msb> + </field> + </fields> + </register> + <register> + <name>AMOUNT</name> + <description>Number of bytes transferred in the last TXD transaction</description> + <addressOffset>0x008</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>AMOUNT</name> + <description>Number of bytes transferred in the last TXD transaction</description> + <lsb>0</lsb> + <msb>9</msb> + </field> + </fields> + </register> + </cluster> + <register> + <dim>2</dim> + <dimIncrement>4</dimIncrement> + <name>ADDRESS[%s]</name> + <description>Description collection[0]: TWI slave address 0</description> + <addressOffset>0x588</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ADDRESS</name> + <description>TWI slave address</description> + <lsb>0</lsb> + <msb>6</msb> + </field> + </fields> + </register> + <register> + <name>CONFIG</name> + <description>Configuration register for the address match mechanism</description> + <addressOffset>0x594</addressOffset> + <access>read-write</access> + <resetValue>0x00000001</resetValue> + <fields> + <field> + <name>ADDRESS0</name> + <description>Enable or disable address matching on ADDRESS[0]</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ADDRESS1</name> + <description>Enable or disable address matching on ADDRESS[1]</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>ORC</name> + <description>Over-read character. Character sent out in case of an over-read of the transmit buffer.</description> + <addressOffset>0x5C0</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ORC</name> + <description>Over-read character. Character sent out in case of an over-read of the transmit buffer.</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + </fields> + </register> + </registers> + </peripheral> + <peripheral> + <name>SPIM0</name> + <description>Serial Peripheral Interface Master with EasyDMA</description> + <groupName>SPIM</groupName> + <baseAddress>0x40004000</baseAddress> + <size>32</size> + <headerStructName>SPIM</headerStructName> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>SPIM0_SPIS0</name> + <value>4</value> + </interrupt> + <registers> + <register> + <name>TASKS_START</name> + <description>Start SPI transaction</description> + <addressOffset>0x010</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_START</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_STOP</name> + <description>Stop SPI transaction</description> + <addressOffset>0x014</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STOP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_SUSPEND</name> + <description>Suspend SPI transaction</description> + <addressOffset>0x01C</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_SUSPEND</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_RESUME</name> + <description>Resume SPI transaction</description> + <addressOffset>0x020</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_RESUME</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_STOPPED</name> + <description>SPI transaction has stopped</description> + <addressOffset>0x104</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_STOPPED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_ENDRX</name> + <description>End of RXD buffer reached</description> + <addressOffset>0x110</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_ENDRX</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_END</name> + <description>End of RXD buffer and TXD buffer reached</description> + <addressOffset>0x118</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_END</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_ENDTX</name> + <description>End of TXD buffer reached</description> + <addressOffset>0x120</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_ENDTX</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_STARTED</name> + <description>Transaction started</description> + <addressOffset>0x14C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_STARTED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>SHORTS</name> + <description>Shortcut register</description> + <addressOffset>0x200</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>END_START</name> + <description>Shortcut between END event and START task</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>STOPPED</name> + <description>Write '1' to Enable interrupt for STOPPED event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENDRX</name> + <description>Write '1' to Enable interrupt for ENDRX event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>END</name> + <description>Write '1' to Enable interrupt for END event</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENDTX</name> + <description>Write '1' to Enable interrupt for ENDTX event</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>STARTED</name> + <description>Write '1' to Enable interrupt for STARTED event</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>STOPPED</name> + <description>Write '1' to Disable interrupt for STOPPED event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENDRX</name> + <description>Write '1' to Disable interrupt for ENDRX event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>END</name> + <description>Write '1' to Disable interrupt for END event</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENDTX</name> + <description>Write '1' to Disable interrupt for ENDTX event</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>STARTED</name> + <description>Write '1' to Disable interrupt for STARTED event</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>ENABLE</name> + <description>Enable SPIM</description> + <addressOffset>0x500</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ENABLE</name> + <description>Enable or disable SPIM</description> + <lsb>0</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable SPIM</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable SPIM</description> + <value>7</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <cluster> + <name>PSEL</name> + <description>Unspecified</description> + <headerStructName>SPIM_PSEL</headerStructName> + <addressOffset>0x508</addressOffset> + <register> + <name>SCK</name> + <description>Pin select for SCK</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>Pin number</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>MOSI</name> + <description>Pin select for MOSI signal</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>Pin number</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>MISO</name> + <description>Pin select for MISO signal</description> + <addressOffset>0x008</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>Pin number</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </cluster> + <register> + <name>FREQUENCY</name> + <description>SPI frequency. Accuracy depends on the HFCLK source selected.</description> + <addressOffset>0x524</addressOffset> + <access>read-write</access> + <resetValue>0x04000000</resetValue> + <fields> + <field> + <name>FREQUENCY</name> + <description>SPI master data rate</description> + <lsb>0</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>K125</name> + <description>125 kbps</description> + <value>0x02000000</value> + </enumeratedValue> + <enumeratedValue> + <name>K250</name> + <description>250 kbps</description> + <value>0x04000000</value> + </enumeratedValue> + <enumeratedValue> + <name>K500</name> + <description>500 kbps</description> + <value>0x08000000</value> + </enumeratedValue> + <enumeratedValue> + <name>M1</name> + <description>1 Mbps</description> + <value>0x10000000</value> + </enumeratedValue> + <enumeratedValue> + <name>M2</name> + <description>2 Mbps</description> + <value>0x20000000</value> + </enumeratedValue> + <enumeratedValue> + <name>M4</name> + <description>4 Mbps</description> + <value>0x40000000</value> + </enumeratedValue> + <enumeratedValue> + <name>M8</name> + <description>8 Mbps</description> + <value>0x80000000</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <cluster> + <name>RXD</name> + <description>RXD EasyDMA channel</description> + <headerStructName>SPIM_RXD</headerStructName> + <addressOffset>0x534</addressOffset> + <register> + <name>PTR</name> + <description>Data pointer</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>PTR</name> + <description>Data pointer</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>MAXCNT</name> + <description>Maximum number of bytes in receive buffer</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>MAXCNT</name> + <description>Maximum number of bytes in receive buffer</description> + <lsb>0</lsb> + <msb>9</msb> + </field> + </fields> + </register> + <register> + <name>AMOUNT</name> + <description>Number of bytes transferred in the last transaction</description> + <addressOffset>0x008</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>AMOUNT</name> + <description>Number of bytes transferred in the last transaction</description> + <lsb>0</lsb> + <msb>9</msb> + </field> + </fields> + </register> + <register> + <name>LIST</name> + <description>EasyDMA list type</description> + <addressOffset>0x00C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>LIST</name> + <description>List type</description> + <lsb>0</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable EasyDMA list</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>ArrayList</name> + <description>Use array list</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </cluster> + <cluster> + <name>TXD</name> + <description>TXD EasyDMA channel</description> + <headerStructName>SPIM_TXD</headerStructName> + <addressOffset>0x544</addressOffset> + <register> + <name>PTR</name> + <description>Data pointer</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>PTR</name> + <description>Data pointer</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>MAXCNT</name> + <description>Maximum number of bytes in transmit buffer</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>MAXCNT</name> + <description>Maximum number of bytes in transmit buffer</description> + <lsb>0</lsb> + <msb>9</msb> + </field> + </fields> + </register> + <register> + <name>AMOUNT</name> + <description>Number of bytes transferred in the last transaction</description> + <addressOffset>0x008</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>AMOUNT</name> + <description>Number of bytes transferred in the last transaction</description> + <lsb>0</lsb> + <msb>9</msb> + </field> + </fields> + </register> + <register> + <name>LIST</name> + <description>EasyDMA list type</description> + <addressOffset>0x00C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>LIST</name> + <description>List type</description> + <lsb>0</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable EasyDMA list</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>ArrayList</name> + <description>Use array list</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </cluster> + <register> + <name>CONFIG</name> + <description>Configuration register</description> + <addressOffset>0x554</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ORDER</name> + <description>Bit order</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>MsbFirst</name> + <description>Most significant bit shifted out first</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>LsbFirst</name> + <description>Least significant bit shifted out first</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CPHA</name> + <description>Serial clock (SCK) phase</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Leading</name> + <description>Sample on leading edge of clock, shift serial data on trailing edge</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Trailing</name> + <description>Sample on trailing edge of clock, shift serial data on leading edge</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CPOL</name> + <description>Serial clock (SCK) polarity</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>ActiveHigh</name> + <description>Active high</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>ActiveLow</name> + <description>Active low</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>ORC</name> + <description>Over-read character. Character clocked out in case and over-read of the TXD buffer.</description> + <addressOffset>0x5C0</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ORC</name> + <description>Over-read character. Character clocked out in case and over-read of the TXD buffer.</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + </fields> + </register> + </registers> + </peripheral> + <peripheral> + <name>SPIS0</name> + <description>SPI Slave</description> + <groupName>SPIS</groupName> + <baseAddress>0x40004000</baseAddress> + <size>32</size> + <alternatePeripheral>SPIM0</alternatePeripheral> + <headerStructName>SPIS</headerStructName> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>SPIM0_SPIS0</name> + <value>4</value> + </interrupt> + <registers> + <register> + <name>TASKS_ACQUIRE</name> + <description>Acquire SPI semaphore</description> + <addressOffset>0x024</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_ACQUIRE</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_RELEASE</name> + <description>Release SPI semaphore, enabling the SPI slave to acquire it</description> + <addressOffset>0x028</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_RELEASE</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_END</name> + <description>Granted transaction completed</description> + <addressOffset>0x104</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_END</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_ENDRX</name> + <description>End of RXD buffer reached</description> + <addressOffset>0x110</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_ENDRX</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_ACQUIRED</name> + <description>Semaphore acquired</description> + <addressOffset>0x128</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_ACQUIRED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>SHORTS</name> + <description>Shortcut register</description> + <addressOffset>0x200</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>END_ACQUIRE</name> + <description>Shortcut between END event and ACQUIRE task</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>END</name> + <description>Write '1' to Enable interrupt for END event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENDRX</name> + <description>Write '1' to Enable interrupt for ENDRX event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ACQUIRED</name> + <description>Write '1' to Enable interrupt for ACQUIRED event</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>END</name> + <description>Write '1' to Disable interrupt for END event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENDRX</name> + <description>Write '1' to Disable interrupt for ENDRX event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ACQUIRED</name> + <description>Write '1' to Disable interrupt for ACQUIRED event</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>SEMSTAT</name> + <description>Semaphore status register</description> + <addressOffset>0x400</addressOffset> + <access>read-only</access> + <resetValue>0x00000001</resetValue> + <fields> + <field> + <name>SEMSTAT</name> + <description>Semaphore status</description> + <lsb>0</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Free</name> + <description>Semaphore is free</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>CPU</name> + <description>Semaphore is assigned to CPU</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>SPIS</name> + <description>Semaphore is assigned to SPI slave</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>CPUPending</name> + <description>Semaphore is assigned to SPI but a handover to the CPU is pending</description> + <value>3</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>STATUS</name> + <description>Status from last transaction</description> + <addressOffset>0x440</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>OVERREAD</name> + <description>TX buffer over-read detected, and prevented</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>NotPresent</name> + <description>Read: error not present</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Present</name> + <description>Read: error present</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: clear error on writing '1'</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>OVERFLOW</name> + <description>RX buffer overflow detected, and prevented</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>NotPresent</name> + <description>Read: error not present</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Present</name> + <description>Read: error present</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: clear error on writing '1'</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>ENABLE</name> + <description>Enable SPI slave</description> + <addressOffset>0x500</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ENABLE</name> + <description>Enable or disable SPI slave</description> + <lsb>0</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable SPI slave</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable SPI slave</description> + <value>2</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <cluster> + <name>PSEL</name> + <description>Unspecified</description> + <headerStructName>SPIS_PSEL</headerStructName> + <addressOffset>0x508</addressOffset> + <register> + <name>SCK</name> + <description>Pin select for SCK</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>Pin number</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>MISO</name> + <description>Pin select for MISO signal</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>Pin number</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>MOSI</name> + <description>Pin select for MOSI signal</description> + <addressOffset>0x008</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>Pin number</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>CSN</name> + <description>Pin select for CSN signal</description> + <addressOffset>0x00C</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>Pin number</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </cluster> + <cluster> + <name>RXD</name> + <description>Unspecified</description> + <headerStructName>SPIS_RXD</headerStructName> + <addressOffset>0x534</addressOffset> + <register> + <name>PTR</name> + <description>RXD data pointer</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>PTR</name> + <description>RXD data pointer</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>MAXCNT</name> + <description>Maximum number of bytes in receive buffer</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>MAXCNT</name> + <description>Maximum number of bytes in receive buffer</description> + <lsb>0</lsb> + <msb>9</msb> + </field> + </fields> + </register> + <register> + <name>AMOUNT</name> + <description>Number of bytes received in last granted transaction</description> + <addressOffset>0x008</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>AMOUNT</name> + <description>Number of bytes received in the last granted transaction</description> + <lsb>0</lsb> + <msb>9</msb> + </field> + </fields> + </register> + </cluster> + <cluster> + <name>TXD</name> + <description>Unspecified</description> + <headerStructName>SPIS_TXD</headerStructName> + <addressOffset>0x544</addressOffset> + <register> + <name>PTR</name> + <description>TXD data pointer</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>PTR</name> + <description>TXD data pointer</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>MAXCNT</name> + <description>Maximum number of bytes in transmit buffer</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>MAXCNT</name> + <description>Maximum number of bytes in transmit buffer</description> + <lsb>0</lsb> + <msb>9</msb> + </field> + </fields> + </register> + <register> + <name>AMOUNT</name> + <description>Number of bytes transmitted in last granted transaction</description> + <addressOffset>0x008</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>AMOUNT</name> + <description>Number of bytes transmitted in last granted transaction</description> + <lsb>0</lsb> + <msb>9</msb> + </field> + </fields> + </register> + </cluster> + <register> + <name>CONFIG</name> + <description>Configuration register</description> + <addressOffset>0x554</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ORDER</name> + <description>Bit order</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>MsbFirst</name> + <description>Most significant bit shifted out first</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>LsbFirst</name> + <description>Least significant bit shifted out first</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CPHA</name> + <description>Serial clock (SCK) phase</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Leading</name> + <description>Sample on leading edge of clock, shift serial data on trailing edge</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Trailing</name> + <description>Sample on trailing edge of clock, shift serial data on leading edge</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CPOL</name> + <description>Serial clock (SCK) polarity</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>ActiveHigh</name> + <description>Active high</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>ActiveLow</name> + <description>Active low</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>DEF</name> + <description>Default character. Character clocked out in case of an ignored transaction.</description> + <addressOffset>0x55C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>DEF</name> + <description>Default character. Character clocked out in case of an ignored transaction.</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + </fields> + </register> + <register> + <name>ORC</name> + <description>Over-read character</description> + <addressOffset>0x5C0</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ORC</name> + <description>Over-read character. Character clocked out after an over-read of the transmit buffer.</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + </fields> + </register> + </registers> + </peripheral> + <peripheral> + <name>GPIOTE</name> + <description>GPIO Tasks and Events</description> + <groupName>GPIOTE</groupName> + <baseAddress>0x40006000</baseAddress> + <size>32</size> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>GPIOTE</name> + <value>6</value> + </interrupt> + <registers> + <register> + <dim>8</dim> + <dimIncrement>4</dimIncrement> + <name>TASKS_OUT[%s]</name> + <description>Description collection[0]: Task for writing to pin specified in CONFIG[0].PSEL. Action on pin is configured in CONFIG[0].POLARITY.</description> + <addressOffset>0x000</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_OUT</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <dim>8</dim> + <dimIncrement>4</dimIncrement> + <name>TASKS_SET[%s]</name> + <description>Description collection[0]: Task for writing to pin specified in CONFIG[0].PSEL. Action on pin is to set it high.</description> + <addressOffset>0x030</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_SET</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <dim>8</dim> + <dimIncrement>4</dimIncrement> + <name>TASKS_CLR[%s]</name> + <description>Description collection[0]: Task for writing to pin specified in CONFIG[0].PSEL. Action on pin is to set it low.</description> + <addressOffset>0x060</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_CLR</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <dim>8</dim> + <dimIncrement>4</dimIncrement> + <name>EVENTS_IN[%s]</name> + <description>Description collection[0]: Event generated from pin specified in CONFIG[0].PSEL</description> + <addressOffset>0x100</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_IN</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_PORT</name> + <description>Event generated from multiple input GPIO pins with SENSE mechanism enabled</description> + <addressOffset>0x17C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_PORT</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>IN0</name> + <description>Write '1' to Enable interrupt for IN[0] event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>IN1</name> + <description>Write '1' to Enable interrupt for IN[1] event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>IN2</name> + <description>Write '1' to Enable interrupt for IN[2] event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>IN3</name> + <description>Write '1' to Enable interrupt for IN[3] event</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>IN4</name> + <description>Write '1' to Enable interrupt for IN[4] event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>IN5</name> + <description>Write '1' to Enable interrupt for IN[5] event</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>IN6</name> + <description>Write '1' to Enable interrupt for IN[6] event</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>IN7</name> + <description>Write '1' to Enable interrupt for IN[7] event</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PORT</name> + <description>Write '1' to Enable interrupt for PORT event</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>IN0</name> + <description>Write '1' to Disable interrupt for IN[0] event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>IN1</name> + <description>Write '1' to Disable interrupt for IN[1] event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>IN2</name> + <description>Write '1' to Disable interrupt for IN[2] event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>IN3</name> + <description>Write '1' to Disable interrupt for IN[3] event</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>IN4</name> + <description>Write '1' to Disable interrupt for IN[4] event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>IN5</name> + <description>Write '1' to Disable interrupt for IN[5] event</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>IN6</name> + <description>Write '1' to Disable interrupt for IN[6] event</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>IN7</name> + <description>Write '1' to Disable interrupt for IN[7] event</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PORT</name> + <description>Write '1' to Disable interrupt for PORT event</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <dim>8</dim> + <dimIncrement>4</dimIncrement> + <name>CONFIG[%s]</name> + <description>Description collection[0]: Configuration for OUT[n], SET[n] and CLR[n] tasks and IN[n] event</description> + <addressOffset>0x510</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>MODE</name> + <description>Mode</description> + <lsb>0</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disabled. Pin specified by PSEL will not be acquired by the GPIOTE module.</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Event</name> + <description>Event mode</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Task</name> + <description>Task mode</description> + <value>3</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PSEL</name> + <description>GPIO number associated with SET[n], CLR[n] and OUT[n] tasks and IN[n] event</description> + <lsb>8</lsb> + <msb>12</msb> + </field> + <field> + <name>POLARITY</name> + <description>When In task mode: Operation to be performed on output when OUT[n] task is triggered. When In event mode: Operation on input that shall trigger IN[n] event.</description> + <lsb>16</lsb> + <msb>17</msb> + <enumeratedValues> + <enumeratedValue> + <name>None</name> + <description>Task mode: No effect on pin from OUT[n] task. Event mode: no IN[n] event generated on pin activity.</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>LoToHi</name> + <description>Task mode: Set pin from OUT[n] task. Event mode: Generate IN[n] event when rising edge on pin.</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>HiToLo</name> + <description>Task mode: Clear pin from OUT[n] task. Event mode: Generate IN[n] event when falling edge on pin.</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>Toggle</name> + <description>Task mode: Toggle pin from OUT[n]. Event mode: Generate IN[n] when any change on pin.</description> + <value>3</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>OUTINIT</name> + <description>When in task mode: Initial value of the output when the GPIOTE channel is configured. When in event mode: No effect.</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Task mode: Initial value of pin before task triggering is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Task mode: Initial value of pin before task triggering is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </registers> + </peripheral> + <peripheral> + <name>SAADC</name> + <description>Analog to Digital Converter</description> + <groupName>SAADC</groupName> + <baseAddress>0x40007000</baseAddress> + <size>32</size> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>SAADC</name> + <value>7</value> + </interrupt> + <registers> + <register> + <name>TASKS_START</name> + <description>Start the ADC and prepare the result buffer in RAM</description> + <addressOffset>0x000</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_START</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_SAMPLE</name> + <description>Take one ADC sample, if scan is enabled all channels are sampled</description> + <addressOffset>0x004</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_SAMPLE</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_STOP</name> + <description>Stop the ADC and terminate any on-going conversion</description> + <addressOffset>0x008</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STOP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_CALIBRATEOFFSET</name> + <description>Starts offset auto-calibration</description> + <addressOffset>0x00C</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_CALIBRATEOFFSET</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_STARTED</name> + <description>The ADC has started</description> + <addressOffset>0x100</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_STARTED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_END</name> + <description>The ADC has filled up the Result buffer</description> + <addressOffset>0x104</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_END</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_DONE</name> + <description>A conversion task has been completed. Depending on the mode, multiple conversions might be needed for a result to be transferred to RAM.</description> + <addressOffset>0x108</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_DONE</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_RESULTDONE</name> + <description>A result is ready to get transferred to RAM.</description> + <addressOffset>0x10C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_RESULTDONE</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_CALIBRATEDONE</name> + <description>Calibration is complete</description> + <addressOffset>0x110</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_CALIBRATEDONE</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_STOPPED</name> + <description>The ADC has stopped</description> + <addressOffset>0x114</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_STOPPED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <cluster> + <dim>8</dim> + <dimIncrement>8</dimIncrement> + <name>EVENTS_CH[%s]</name> + <description>Unspecified</description> + <headerStructName>SAADC_EVENTS_CH</headerStructName> + <addressOffset>0x118</addressOffset> + <register> + <name>LIMITH</name> + <description>Description cluster[0]: Last results is equal or above CH[0].LIMIT.HIGH</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>LIMITH</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>LIMITL</name> + <description>Description cluster[0]: Last results is equal or below CH[0].LIMIT.LOW</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>LIMITL</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + </cluster> + <register> + <name>INTEN</name> + <description>Enable or disable interrupt</description> + <addressOffset>0x300</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>STARTED</name> + <description>Enable or disable interrupt for STARTED event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>END</name> + <description>Enable or disable interrupt for END event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DONE</name> + <description>Enable or disable interrupt for DONE event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RESULTDONE</name> + <description>Enable or disable interrupt for RESULTDONE event</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CALIBRATEDONE</name> + <description>Enable or disable interrupt for CALIBRATEDONE event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>STOPPED</name> + <description>Enable or disable interrupt for STOPPED event</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH0LIMITH</name> + <description>Enable or disable interrupt for CH[0].LIMITH event</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH0LIMITL</name> + <description>Enable or disable interrupt for CH[0].LIMITL event</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH1LIMITH</name> + <description>Enable or disable interrupt for CH[1].LIMITH event</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH1LIMITL</name> + <description>Enable or disable interrupt for CH[1].LIMITL event</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH2LIMITH</name> + <description>Enable or disable interrupt for CH[2].LIMITH event</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH2LIMITL</name> + <description>Enable or disable interrupt for CH[2].LIMITL event</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH3LIMITH</name> + <description>Enable or disable interrupt for CH[3].LIMITH event</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH3LIMITL</name> + <description>Enable or disable interrupt for CH[3].LIMITL event</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH4LIMITH</name> + <description>Enable or disable interrupt for CH[4].LIMITH event</description> + <lsb>14</lsb> + <msb>14</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH4LIMITL</name> + <description>Enable or disable interrupt for CH[4].LIMITL event</description> + <lsb>15</lsb> + <msb>15</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH5LIMITH</name> + <description>Enable or disable interrupt for CH[5].LIMITH event</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH5LIMITL</name> + <description>Enable or disable interrupt for CH[5].LIMITL event</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH6LIMITH</name> + <description>Enable or disable interrupt for CH[6].LIMITH event</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH6LIMITL</name> + <description>Enable or disable interrupt for CH[6].LIMITL event</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH7LIMITH</name> + <description>Enable or disable interrupt for CH[7].LIMITH event</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH7LIMITL</name> + <description>Enable or disable interrupt for CH[7].LIMITL event</description> + <lsb>21</lsb> + <msb>21</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>STARTED</name> + <description>Write '1' to Enable interrupt for STARTED event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>END</name> + <description>Write '1' to Enable interrupt for END event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DONE</name> + <description>Write '1' to Enable interrupt for DONE event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RESULTDONE</name> + <description>Write '1' to Enable interrupt for RESULTDONE event</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CALIBRATEDONE</name> + <description>Write '1' to Enable interrupt for CALIBRATEDONE event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>STOPPED</name> + <description>Write '1' to Enable interrupt for STOPPED event</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH0LIMITH</name> + <description>Write '1' to Enable interrupt for CH[0].LIMITH event</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH0LIMITL</name> + <description>Write '1' to Enable interrupt for CH[0].LIMITL event</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH1LIMITH</name> + <description>Write '1' to Enable interrupt for CH[1].LIMITH event</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH1LIMITL</name> + <description>Write '1' to Enable interrupt for CH[1].LIMITL event</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH2LIMITH</name> + <description>Write '1' to Enable interrupt for CH[2].LIMITH event</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH2LIMITL</name> + <description>Write '1' to Enable interrupt for CH[2].LIMITL event</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH3LIMITH</name> + <description>Write '1' to Enable interrupt for CH[3].LIMITH event</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH3LIMITL</name> + <description>Write '1' to Enable interrupt for CH[3].LIMITL event</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH4LIMITH</name> + <description>Write '1' to Enable interrupt for CH[4].LIMITH event</description> + <lsb>14</lsb> + <msb>14</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH4LIMITL</name> + <description>Write '1' to Enable interrupt for CH[4].LIMITL event</description> + <lsb>15</lsb> + <msb>15</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH5LIMITH</name> + <description>Write '1' to Enable interrupt for CH[5].LIMITH event</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH5LIMITL</name> + <description>Write '1' to Enable interrupt for CH[5].LIMITL event</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH6LIMITH</name> + <description>Write '1' to Enable interrupt for CH[6].LIMITH event</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH6LIMITL</name> + <description>Write '1' to Enable interrupt for CH[6].LIMITL event</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH7LIMITH</name> + <description>Write '1' to Enable interrupt for CH[7].LIMITH event</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH7LIMITL</name> + <description>Write '1' to Enable interrupt for CH[7].LIMITL event</description> + <lsb>21</lsb> + <msb>21</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>STARTED</name> + <description>Write '1' to Disable interrupt for STARTED event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>END</name> + <description>Write '1' to Disable interrupt for END event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DONE</name> + <description>Write '1' to Disable interrupt for DONE event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RESULTDONE</name> + <description>Write '1' to Disable interrupt for RESULTDONE event</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CALIBRATEDONE</name> + <description>Write '1' to Disable interrupt for CALIBRATEDONE event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>STOPPED</name> + <description>Write '1' to Disable interrupt for STOPPED event</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH0LIMITH</name> + <description>Write '1' to Disable interrupt for CH[0].LIMITH event</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH0LIMITL</name> + <description>Write '1' to Disable interrupt for CH[0].LIMITL event</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH1LIMITH</name> + <description>Write '1' to Disable interrupt for CH[1].LIMITH event</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH1LIMITL</name> + <description>Write '1' to Disable interrupt for CH[1].LIMITL event</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH2LIMITH</name> + <description>Write '1' to Disable interrupt for CH[2].LIMITH event</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH2LIMITL</name> + <description>Write '1' to Disable interrupt for CH[2].LIMITL event</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH3LIMITH</name> + <description>Write '1' to Disable interrupt for CH[3].LIMITH event</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH3LIMITL</name> + <description>Write '1' to Disable interrupt for CH[3].LIMITL event</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH4LIMITH</name> + <description>Write '1' to Disable interrupt for CH[4].LIMITH event</description> + <lsb>14</lsb> + <msb>14</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH4LIMITL</name> + <description>Write '1' to Disable interrupt for CH[4].LIMITL event</description> + <lsb>15</lsb> + <msb>15</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH5LIMITH</name> + <description>Write '1' to Disable interrupt for CH[5].LIMITH event</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH5LIMITL</name> + <description>Write '1' to Disable interrupt for CH[5].LIMITL event</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH6LIMITH</name> + <description>Write '1' to Disable interrupt for CH[6].LIMITH event</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH6LIMITL</name> + <description>Write '1' to Disable interrupt for CH[6].LIMITL event</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH7LIMITH</name> + <description>Write '1' to Disable interrupt for CH[7].LIMITH event</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH7LIMITL</name> + <description>Write '1' to Disable interrupt for CH[7].LIMITL event</description> + <lsb>21</lsb> + <msb>21</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>STATUS</name> + <description>Status</description> + <addressOffset>0x400</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>STATUS</name> + <description>Status</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Ready</name> + <description>ADC is ready. No on-going conversion.</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Busy</name> + <description>ADC is busy. Conversion in progress.</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>ENABLE</name> + <description>Enable or disable ADC</description> + <addressOffset>0x500</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ENABLE</name> + <description>Enable or disable ADC</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable ADC</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable ADC</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <cluster> + <dim>8</dim> + <dimIncrement>16</dimIncrement> + <name>CH[%s]</name> + <description>Unspecified</description> + <headerStructName>SAADC_CH</headerStructName> + <addressOffset>0x510</addressOffset> + <register> + <name>PSELP</name> + <description>Description cluster[0]: Input positive pin selection for CH[0]</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <resetValue>0x00000000</resetValue> + <fields> + <field> + <name>PSELP</name> + <description>Analog positive input channel</description> + <lsb>0</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>NC</name> + <description>Not connected</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput0</name> + <description>AIN0</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput1</name> + <description>AIN1</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput2</name> + <description>AIN2</description> + <value>3</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput3</name> + <description>AIN3</description> + <value>4</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput4</name> + <description>AIN4</description> + <value>5</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput5</name> + <description>AIN5</description> + <value>6</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput6</name> + <description>AIN6</description> + <value>7</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput7</name> + <description>AIN7</description> + <value>8</value> + </enumeratedValue> + <enumeratedValue> + <name>VDD</name> + <description>VDD</description> + <value>9</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>PSELN</name> + <description>Description cluster[0]: Input negative pin selection for CH[0]</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <resetValue>0x00000000</resetValue> + <fields> + <field> + <name>PSELN</name> + <description>Analog negative input, enables differential channel</description> + <lsb>0</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>NC</name> + <description>Not connected</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput0</name> + <description>AIN0</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput1</name> + <description>AIN1</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput2</name> + <description>AIN2</description> + <value>3</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput3</name> + <description>AIN3</description> + <value>4</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput4</name> + <description>AIN4</description> + <value>5</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput5</name> + <description>AIN5</description> + <value>6</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput6</name> + <description>AIN6</description> + <value>7</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput7</name> + <description>AIN7</description> + <value>8</value> + </enumeratedValue> + <enumeratedValue> + <name>VDD</name> + <description>VDD</description> + <value>9</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>CONFIG</name> + <description>Description cluster[0]: Input configuration for CH[0]</description> + <addressOffset>0x008</addressOffset> + <access>read-write</access> + <resetValue>0x00020000</resetValue> + <fields> + <field> + <name>RESP</name> + <description>Positive channel resistor control</description> + <lsb>0</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Bypass</name> + <description>Bypass resistor ladder</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Pulldown</name> + <description>Pull-down to GND</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Pullup</name> + <description>Pull-up to VDD</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>VDD1_2</name> + <description>Set input at VDD/2</description> + <value>3</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RESN</name> + <description>Negative channel resistor control</description> + <lsb>4</lsb> + <msb>5</msb> + <enumeratedValues> + <enumeratedValue> + <name>Bypass</name> + <description>Bypass resistor ladder</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Pulldown</name> + <description>Pull-down to GND</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Pullup</name> + <description>Pull-up to VDD</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>VDD1_2</name> + <description>Set input at VDD/2</description> + <value>3</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>GAIN</name> + <description>Gain control</description> + <lsb>8</lsb> + <msb>10</msb> + <enumeratedValues> + <enumeratedValue> + <name>Gain1_6</name> + <description>1/6</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Gain1_5</name> + <description>1/5</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Gain1_4</name> + <description>1/4</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>Gain1_3</name> + <description>1/3</description> + <value>3</value> + </enumeratedValue> + <enumeratedValue> + <name>Gain1_2</name> + <description>1/2</description> + <value>4</value> + </enumeratedValue> + <enumeratedValue> + <name>Gain1</name> + <description>1</description> + <value>5</value> + </enumeratedValue> + <enumeratedValue> + <name>Gain2</name> + <description>2</description> + <value>6</value> + </enumeratedValue> + <enumeratedValue> + <name>Gain4</name> + <description>4</description> + <value>7</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REFSEL</name> + <description>Reference control</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <enumeratedValue> + <name>Internal</name> + <description>Internal reference (0.6 V)</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>VDD1_4</name> + <description>VDD/4 as reference</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TACQ</name> + <description>Acquisition time, the time the ADC uses to sample the input voltage</description> + <lsb>16</lsb> + <msb>18</msb> + <enumeratedValues> + <enumeratedValue> + <name>3us</name> + <description>3 us</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>5us</name> + <description>5 us</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>10us</name> + <description>10 us</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>15us</name> + <description>15 us</description> + <value>3</value> + </enumeratedValue> + <enumeratedValue> + <name>20us</name> + <description>20 us</description> + <value>4</value> + </enumeratedValue> + <enumeratedValue> + <name>40us</name> + <description>40 us</description> + <value>5</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>MODE</name> + <description>Enable differential mode</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <enumeratedValue> + <name>SE</name> + <description>Single ended, PSELN will be ignored, negative input to ADC shorted to GND</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Diff</name> + <description>Differential</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>BURST</name> + <description>Enable burst mode</description> + <lsb>24</lsb> + <msb>24</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Burst mode is disabled (normal operation)</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Burst mode is enabled. SAADC takes 2^OVERSAMPLE number of samples as fast as it can, and sends the average to Data RAM.</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>LIMIT</name> + <description>Description cluster[0]: High/low limits for event monitoring a channel</description> + <addressOffset>0x00C</addressOffset> + <access>read-write</access> + <resetValue>0x7FFF8000</resetValue> + <fields> + <field> + <name>LOW</name> + <description>Low level limit</description> + <lsb>0</lsb> + <msb>15</msb> + </field> + <field> + <name>HIGH</name> + <description>High level limit</description> + <lsb>16</lsb> + <msb>31</msb> + </field> + </fields> + </register> + </cluster> + <register> + <name>RESOLUTION</name> + <description>Resolution configuration</description> + <addressOffset>0x5F0</addressOffset> + <access>read-write</access> + <resetValue>0x00000001</resetValue> + <fields> + <field> + <name>VAL</name> + <description>Set the resolution</description> + <lsb>0</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>8bit</name> + <description>8 bit</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>10bit</name> + <description>10 bit</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>12bit</name> + <description>12 bit</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>14bit</name> + <description>14 bit</description> + <value>3</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>OVERSAMPLE</name> + <description>Oversampling configuration. OVERSAMPLE should not be combined with SCAN. The RESOLUTION is applied before averaging, thus for high OVERSAMPLE a higher RESOLUTION should be used.</description> + <addressOffset>0x5F4</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>OVERSAMPLE</name> + <description>Oversample control</description> + <lsb>0</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Bypass</name> + <description>Bypass oversampling</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Over2x</name> + <description>Oversample 2x</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Over4x</name> + <description>Oversample 4x</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>Over8x</name> + <description>Oversample 8x</description> + <value>3</value> + </enumeratedValue> + <enumeratedValue> + <name>Over16x</name> + <description>Oversample 16x</description> + <value>4</value> + </enumeratedValue> + <enumeratedValue> + <name>Over32x</name> + <description>Oversample 32x</description> + <value>5</value> + </enumeratedValue> + <enumeratedValue> + <name>Over64x</name> + <description>Oversample 64x</description> + <value>6</value> + </enumeratedValue> + <enumeratedValue> + <name>Over128x</name> + <description>Oversample 128x</description> + <value>7</value> + </enumeratedValue> + <enumeratedValue> + <name>Over256x</name> + <description>Oversample 256x</description> + <value>8</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>SAMPLERATE</name> + <description>Controls normal or continuous sample rate</description> + <addressOffset>0x5F8</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>CC</name> + <description>Capture and compare value. Sample rate is 16 MHz/CC</description> + <lsb>0</lsb> + <msb>10</msb> + </field> + <field> + <name>MODE</name> + <description>Select mode for sample rate control</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <enumeratedValue> + <name>Task</name> + <description>Rate is controlled from SAMPLE task</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Timers</name> + <description>Rate is controlled from local timer (use CC to control the rate)</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <cluster> + <name>RESULT</name> + <description>RESULT EasyDMA channel</description> + <headerStructName>SAADC_RESULT</headerStructName> + <addressOffset>0x62C</addressOffset> + <register> + <name>PTR</name> + <description>Data pointer</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>PTR</name> + <description>Data pointer</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>MAXCNT</name> + <description>Maximum number of buffer words to transfer</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>MAXCNT</name> + <description>Maximum number of buffer words to transfer</description> + <lsb>0</lsb> + <msb>14</msb> + </field> + </fields> + </register> + <register> + <name>AMOUNT</name> + <description>Number of buffer words transferred since last START</description> + <addressOffset>0x008</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>AMOUNT</name> + <description>Number of buffer words transferred since last START. This register can be read after an END or STOPPED event.</description> + <lsb>0</lsb> + <msb>14</msb> + </field> + </fields> + </register> + </cluster> + </registers> + </peripheral> + <peripheral> + <name>TIMER0</name> + <description>Timer/Counter 0</description> + <groupName>TIMER</groupName> + <baseAddress>0x40008000</baseAddress> + <size>32</size> + <headerStructName>TIMER</headerStructName> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>TIMER0</name> + <value>8</value> + </interrupt> + <registers> + <register> + <name>TASKS_START</name> + <description>Start Timer</description> + <addressOffset>0x000</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_START</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_STOP</name> + <description>Stop Timer</description> + <addressOffset>0x004</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STOP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_COUNT</name> + <description>Increment Timer (Counter mode only)</description> + <addressOffset>0x008</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_COUNT</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_CLEAR</name> + <description>Clear time</description> + <addressOffset>0x00C</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_CLEAR</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_SHUTDOWN</name> + <description>Deprecated register - Shut down timer</description> + <addressOffset>0x010</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_SHUTDOWN</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <dim>6</dim> + <dimIncrement>4</dimIncrement> + <name>TASKS_CAPTURE[%s]</name> + <description>Description collection[0]: Capture Timer value to CC[0] register</description> + <addressOffset>0x040</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_CAPTURE</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <dim>6</dim> + <dimIncrement>4</dimIncrement> + <name>EVENTS_COMPARE[%s]</name> + <description>Description collection[0]: Compare event on CC[0] match</description> + <addressOffset>0x140</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_COMPARE</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>SHORTS</name> + <description>Shortcut register</description> + <addressOffset>0x200</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>COMPARE0_CLEAR</name> + <description>Shortcut between COMPARE[0] event and CLEAR task</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE1_CLEAR</name> + <description>Shortcut between COMPARE[1] event and CLEAR task</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE2_CLEAR</name> + <description>Shortcut between COMPARE[2] event and CLEAR task</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE3_CLEAR</name> + <description>Shortcut between COMPARE[3] event and CLEAR task</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE4_CLEAR</name> + <description>Shortcut between COMPARE[4] event and CLEAR task</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE5_CLEAR</name> + <description>Shortcut between COMPARE[5] event and CLEAR task</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE0_STOP</name> + <description>Shortcut between COMPARE[0] event and STOP task</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE1_STOP</name> + <description>Shortcut between COMPARE[1] event and STOP task</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE2_STOP</name> + <description>Shortcut between COMPARE[2] event and STOP task</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE3_STOP</name> + <description>Shortcut between COMPARE[3] event and STOP task</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE4_STOP</name> + <description>Shortcut between COMPARE[4] event and STOP task</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE5_STOP</name> + <description>Shortcut between COMPARE[5] event and STOP task</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>COMPARE0</name> + <description>Write '1' to Enable interrupt for COMPARE[0] event</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE1</name> + <description>Write '1' to Enable interrupt for COMPARE[1] event</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE2</name> + <description>Write '1' to Enable interrupt for COMPARE[2] event</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE3</name> + <description>Write '1' to Enable interrupt for COMPARE[3] event</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE4</name> + <description>Write '1' to Enable interrupt for COMPARE[4] event</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE5</name> + <description>Write '1' to Enable interrupt for COMPARE[5] event</description> + <lsb>21</lsb> + <msb>21</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>COMPARE0</name> + <description>Write '1' to Disable interrupt for COMPARE[0] event</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE1</name> + <description>Write '1' to Disable interrupt for COMPARE[1] event</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE2</name> + <description>Write '1' to Disable interrupt for COMPARE[2] event</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE3</name> + <description>Write '1' to Disable interrupt for COMPARE[3] event</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE4</name> + <description>Write '1' to Disable interrupt for COMPARE[4] event</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE5</name> + <description>Write '1' to Disable interrupt for COMPARE[5] event</description> + <lsb>21</lsb> + <msb>21</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>MODE</name> + <description>Timer mode selection</description> + <addressOffset>0x504</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>MODE</name> + <description>Timer mode</description> + <lsb>0</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Timer</name> + <description>Select Timer mode</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Counter</name> + <description>Deprecated enumerator - Select Counter mode</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>LowPowerCounter</name> + <description>Select Low Power Counter mode</description> + <value>2</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>BITMODE</name> + <description>Configure the number of bits used by the TIMER</description> + <addressOffset>0x508</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>BITMODE</name> + <description>Timer bit width</description> + <lsb>0</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>16Bit</name> + <description>16 bit timer bit width</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>08Bit</name> + <description>8 bit timer bit width</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>24Bit</name> + <description>24 bit timer bit width</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>32Bit</name> + <description>32 bit timer bit width</description> + <value>3</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>PRESCALER</name> + <description>Timer prescaler register</description> + <addressOffset>0x510</addressOffset> + <access>read-write</access> + <resetValue>0x00000004</resetValue> + <fields> + <field> + <name>PRESCALER</name> + <description>Prescaler value</description> + <lsb>0</lsb> + <msb>3</msb> + </field> + </fields> + </register> + <register> + <dim>6</dim> + <dimIncrement>4</dimIncrement> + <name>CC[%s]</name> + <description>Description collection[0]: Capture/Compare register 0</description> + <addressOffset>0x540</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>CC</name> + <description>Capture/Compare value</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + </registers> + </peripheral> + <peripheral derivedFrom="TIMER0"> + <name>TIMER1</name> + <description>Timer/Counter 1</description> + <groupName>TIMER</groupName> + <baseAddress>0x40009000</baseAddress> + <size>32</size> + <interrupt> + <name>TIMER1</name> + <value>9</value> + </interrupt> + </peripheral> + <peripheral derivedFrom="TIMER0"> + <name>TIMER2</name> + <description>Timer/Counter 2</description> + <groupName>TIMER</groupName> + <baseAddress>0x4000A000</baseAddress> + <size>32</size> + <interrupt> + <name>TIMER2</name> + <value>10</value> + </interrupt> + </peripheral> + <peripheral> + <name>RTC0</name> + <description>Real time counter 0</description> + <groupName>RTC</groupName> + <baseAddress>0x4000B000</baseAddress> + <size>32</size> + <headerStructName>RTC</headerStructName> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>RTC0</name> + <value>11</value> + </interrupt> + <registers> + <register> + <name>TASKS_START</name> + <description>Start RTC COUNTER</description> + <addressOffset>0x000</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_START</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_STOP</name> + <description>Stop RTC COUNTER</description> + <addressOffset>0x004</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STOP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_CLEAR</name> + <description>Clear RTC COUNTER</description> + <addressOffset>0x008</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_CLEAR</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_TRIGOVRFLW</name> + <description>Set COUNTER to 0xFFFFF0</description> + <addressOffset>0x00C</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_TRIGOVRFLW</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_TICK</name> + <description>Event on COUNTER increment</description> + <addressOffset>0x100</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_TICK</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_OVRFLW</name> + <description>Event on COUNTER overflow</description> + <addressOffset>0x104</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_OVRFLW</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <dim>4</dim> + <dimIncrement>4</dimIncrement> + <name>EVENTS_COMPARE[%s]</name> + <description>Description collection[0]: Compare event on CC[0] match</description> + <addressOffset>0x140</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_COMPARE</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>TICK</name> + <description>Write '1' to Enable interrupt for TICK event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>OVRFLW</name> + <description>Write '1' to Enable interrupt for OVRFLW event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE0</name> + <description>Write '1' to Enable interrupt for COMPARE[0] event</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE1</name> + <description>Write '1' to Enable interrupt for COMPARE[1] event</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE2</name> + <description>Write '1' to Enable interrupt for COMPARE[2] event</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE3</name> + <description>Write '1' to Enable interrupt for COMPARE[3] event</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>TICK</name> + <description>Write '1' to Disable interrupt for TICK event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>OVRFLW</name> + <description>Write '1' to Disable interrupt for OVRFLW event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE0</name> + <description>Write '1' to Disable interrupt for COMPARE[0] event</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE1</name> + <description>Write '1' to Disable interrupt for COMPARE[1] event</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE2</name> + <description>Write '1' to Disable interrupt for COMPARE[2] event</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE3</name> + <description>Write '1' to Disable interrupt for COMPARE[3] event</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>EVTEN</name> + <description>Enable or disable event routing</description> + <addressOffset>0x340</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>TICK</name> + <description>Enable or disable event routing for TICK event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>OVRFLW</name> + <description>Enable or disable event routing for OVRFLW event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE0</name> + <description>Enable or disable event routing for COMPARE[0] event</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE1</name> + <description>Enable or disable event routing for COMPARE[1] event</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE2</name> + <description>Enable or disable event routing for COMPARE[2] event</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE3</name> + <description>Enable or disable event routing for COMPARE[3] event</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>EVTENSET</name> + <description>Enable event routing</description> + <addressOffset>0x344</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>TICK</name> + <description>Write '1' to Enable event routing for TICK event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>OVRFLW</name> + <description>Write '1' to Enable event routing for OVRFLW event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE0</name> + <description>Write '1' to Enable event routing for COMPARE[0] event</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE1</name> + <description>Write '1' to Enable event routing for COMPARE[1] event</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE2</name> + <description>Write '1' to Enable event routing for COMPARE[2] event</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE3</name> + <description>Write '1' to Enable event routing for COMPARE[3] event</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>EVTENCLR</name> + <description>Disable event routing</description> + <addressOffset>0x348</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>TICK</name> + <description>Write '1' to Disable event routing for TICK event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>OVRFLW</name> + <description>Write '1' to Disable event routing for OVRFLW event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE0</name> + <description>Write '1' to Disable event routing for COMPARE[0] event</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE1</name> + <description>Write '1' to Disable event routing for COMPARE[1] event</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE2</name> + <description>Write '1' to Disable event routing for COMPARE[2] event</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>COMPARE3</name> + <description>Write '1' to Disable event routing for COMPARE[3] event</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>COUNTER</name> + <description>Current COUNTER value</description> + <addressOffset>0x504</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>COUNTER</name> + <description>Counter value</description> + <lsb>0</lsb> + <msb>23</msb> + </field> + </fields> + </register> + <register> + <name>PRESCALER</name> + <description>12 bit prescaler for COUNTER frequency (32768/(PRESCALER+1)).Must be written when RTC is stopped</description> + <addressOffset>0x508</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>PRESCALER</name> + <description>Prescaler value</description> + <lsb>0</lsb> + <msb>11</msb> + </field> + </fields> + </register> + <register> + <dim>4</dim> + <dimIncrement>4</dimIncrement> + <name>CC[%s]</name> + <description>Description collection[0]: Compare register 0</description> + <addressOffset>0x540</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>COMPARE</name> + <description>Compare value</description> + <lsb>0</lsb> + <msb>23</msb> + </field> + </fields> + </register> + </registers> + </peripheral> + <peripheral> + <name>TEMP</name> + <description>Temperature Sensor</description> + <groupName>TEMP</groupName> + <baseAddress>0x4000C000</baseAddress> + <size>32</size> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>TEMP</name> + <value>12</value> + </interrupt> + <registers> + <register> + <name>TASKS_START</name> + <description>Start temperature measurement</description> + <addressOffset>0x000</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_START</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_STOP</name> + <description>Stop temperature measurement</description> + <addressOffset>0x004</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STOP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_DATARDY</name> + <description>Temperature measurement complete, data ready</description> + <addressOffset>0x100</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_DATARDY</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>DATARDY</name> + <description>Write '1' to Enable interrupt for DATARDY event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>DATARDY</name> + <description>Write '1' to Disable interrupt for DATARDY event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>TEMP</name> + <description>Temperature in degC (0.25deg steps)</description> + <addressOffset>0x508</addressOffset> + <access>read-only</access> + <dataType>int32_t</dataType> + <fields> + <field> + <name>TEMP</name> + <description>Temperature in degC (0.25deg steps)</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>A0</name> + <description>Slope of 1st piece wise linear function</description> + <addressOffset>0x520</addressOffset> + <access>read-write</access> + <resetValue>0x00000326</resetValue> + <fields> + <field> + <name>A0</name> + <description>Slope of 1st piece wise linear function</description> + <lsb>0</lsb> + <msb>11</msb> + </field> + </fields> + </register> + <register> + <name>A1</name> + <description>Slope of 2nd piece wise linear function</description> + <addressOffset>0x524</addressOffset> + <access>read-write</access> + <resetValue>0x00000348</resetValue> + <fields> + <field> + <name>A1</name> + <description>Slope of 2nd piece wise linear function</description> + <lsb>0</lsb> + <msb>11</msb> + </field> + </fields> + </register> + <register> + <name>A2</name> + <description>Slope of 3rd piece wise linear function</description> + <addressOffset>0x528</addressOffset> + <access>read-write</access> + <resetValue>0x000003AA</resetValue> + <fields> + <field> + <name>A2</name> + <description>Slope of 3rd piece wise linear function</description> + <lsb>0</lsb> + <msb>11</msb> + </field> + </fields> + </register> + <register> + <name>A3</name> + <description>Slope of 4th piece wise linear function</description> + <addressOffset>0x52C</addressOffset> + <access>read-write</access> + <resetValue>0x0000040E</resetValue> + <fields> + <field> + <name>A3</name> + <description>Slope of 4th piece wise linear function</description> + <lsb>0</lsb> + <msb>11</msb> + </field> + </fields> + </register> + <register> + <name>A4</name> + <description>Slope of 5th piece wise linear function</description> + <addressOffset>0x530</addressOffset> + <access>read-write</access> + <resetValue>0x000004BD</resetValue> + <fields> + <field> + <name>A4</name> + <description>Slope of 5th piece wise linear function</description> + <lsb>0</lsb> + <msb>11</msb> + </field> + </fields> + </register> + <register> + <name>A5</name> + <description>Slope of 6th piece wise linear function</description> + <addressOffset>0x534</addressOffset> + <access>read-write</access> + <resetValue>0x000005A3</resetValue> + <fields> + <field> + <name>A5</name> + <description>Slope of 6th piece wise linear function</description> + <lsb>0</lsb> + <msb>11</msb> + </field> + </fields> + </register> + <register> + <name>B0</name> + <description>y-intercept of 1st piece wise linear function</description> + <addressOffset>0x540</addressOffset> + <access>read-write</access> + <resetValue>0x00003FEF</resetValue> + <fields> + <field> + <name>B0</name> + <description>y-intercept of 1st piece wise linear function</description> + <lsb>0</lsb> + <msb>13</msb> + </field> + </fields> + </register> + <register> + <name>B1</name> + <description>y-intercept of 2nd piece wise linear function</description> + <addressOffset>0x544</addressOffset> + <access>read-write</access> + <resetValue>0x00003FBE</resetValue> + <fields> + <field> + <name>B1</name> + <description>y-intercept of 2nd piece wise linear function</description> + <lsb>0</lsb> + <msb>13</msb> + </field> + </fields> + </register> + <register> + <name>B2</name> + <description>y-intercept of 3rd piece wise linear function</description> + <addressOffset>0x548</addressOffset> + <access>read-write</access> + <resetValue>0x00003FBE</resetValue> + <fields> + <field> + <name>B2</name> + <description>y-intercept of 3rd piece wise linear function</description> + <lsb>0</lsb> + <msb>13</msb> + </field> + </fields> + </register> + <register> + <name>B3</name> + <description>y-intercept of 4th piece wise linear function</description> + <addressOffset>0x54C</addressOffset> + <access>read-write</access> + <resetValue>0x00000012</resetValue> + <fields> + <field> + <name>B3</name> + <description>y-intercept of 4th piece wise linear function</description> + <lsb>0</lsb> + <msb>13</msb> + </field> + </fields> + </register> + <register> + <name>B4</name> + <description>y-intercept of 5th piece wise linear function</description> + <addressOffset>0x550</addressOffset> + <access>read-write</access> + <resetValue>0x00000124</resetValue> + <fields> + <field> + <name>B4</name> + <description>y-intercept of 5th piece wise linear function</description> + <lsb>0</lsb> + <msb>13</msb> + </field> + </fields> + </register> + <register> + <name>B5</name> + <description>y-intercept of 6th piece wise linear function</description> + <addressOffset>0x554</addressOffset> + <access>read-write</access> + <resetValue>0x0000027C</resetValue> + <fields> + <field> + <name>B5</name> + <description>y-intercept of 6th piece wise linear function</description> + <lsb>0</lsb> + <msb>13</msb> + </field> + </fields> + </register> + <register> + <name>T0</name> + <description>End point of 1st piece wise linear function</description> + <addressOffset>0x560</addressOffset> + <access>read-write</access> + <resetValue>0x000000E2</resetValue> + <fields> + <field> + <name>T0</name> + <description>End point of 1st piece wise linear function</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + </fields> + </register> + <register> + <name>T1</name> + <description>End point of 2nd piece wise linear function</description> + <addressOffset>0x564</addressOffset> + <access>read-write</access> + <resetValue>0x00000000</resetValue> + <fields> + <field> + <name>T1</name> + <description>End point of 2nd piece wise linear function</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + </fields> + </register> + <register> + <name>T2</name> + <description>End point of 3rd piece wise linear function</description> + <addressOffset>0x568</addressOffset> + <access>read-write</access> + <resetValue>0x00000019</resetValue> + <fields> + <field> + <name>T2</name> + <description>End point of 3rd piece wise linear function</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + </fields> + </register> + <register> + <name>T3</name> + <description>End point of 4th piece wise linear function</description> + <addressOffset>0x56C</addressOffset> + <access>read-write</access> + <resetValue>0x0000003C</resetValue> + <fields> + <field> + <name>T3</name> + <description>End point of 4th piece wise linear function</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + </fields> + </register> + <register> + <name>T4</name> + <description>End point of 5th piece wise linear function</description> + <addressOffset>0x570</addressOffset> + <access>read-write</access> + <resetValue>0x00000050</resetValue> + <fields> + <field> + <name>T4</name> + <description>End point of 5th piece wise linear function</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + </fields> + </register> + </registers> + </peripheral> + <peripheral> + <name>RNG</name> + <description>Random Number Generator</description> + <groupName>RNG</groupName> + <baseAddress>0x4000D000</baseAddress> + <size>32</size> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>RNG</name> + <value>13</value> + </interrupt> + <registers> + <register> + <name>TASKS_START</name> + <description>Task starting the random number generator</description> + <addressOffset>0x000</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_START</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_STOP</name> + <description>Task stopping the random number generator</description> + <addressOffset>0x004</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STOP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_VALRDY</name> + <description>Event being generated for every new random number written to the VALUE register</description> + <addressOffset>0x100</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_VALRDY</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>SHORTS</name> + <description>Shortcut register</description> + <addressOffset>0x200</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>VALRDY_STOP</name> + <description>Shortcut between VALRDY event and STOP task</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>VALRDY</name> + <description>Write '1' to Enable interrupt for VALRDY event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>VALRDY</name> + <description>Write '1' to Disable interrupt for VALRDY event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>CONFIG</name> + <description>Configuration register</description> + <addressOffset>0x504</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>DERCEN</name> + <description>Bias correction</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>VALUE</name> + <description>Output random number</description> + <addressOffset>0x508</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>VALUE</name> + <description>Generated random number</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + </fields> + </register> + </registers> + </peripheral> + <peripheral> + <name>ECB</name> + <description>AES ECB Mode Encryption</description> + <groupName>ECB</groupName> + <baseAddress>0x4000E000</baseAddress> + <size>32</size> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>ECB</name> + <value>14</value> + </interrupt> + <registers> + <register> + <name>TASKS_STARTECB</name> + <description>Start ECB block encrypt</description> + <addressOffset>0x000</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STARTECB</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_STOPECB</name> + <description>Abort a possible executing ECB operation</description> + <addressOffset>0x004</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STOPECB</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_ENDECB</name> + <description>ECB block encrypt complete</description> + <addressOffset>0x100</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_ENDECB</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_ERRORECB</name> + <description>ECB block encrypt aborted because of a STOPECB task or due to an error</description> + <addressOffset>0x104</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_ERRORECB</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ENDECB</name> + <description>Write '1' to Enable interrupt for ENDECB event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ERRORECB</name> + <description>Write '1' to Enable interrupt for ERRORECB event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ENDECB</name> + <description>Write '1' to Disable interrupt for ENDECB event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ERRORECB</name> + <description>Write '1' to Disable interrupt for ERRORECB event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>ECBDATAPTR</name> + <description>ECB block encrypt memory pointers</description> + <addressOffset>0x504</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ECBDATAPTR</name> + <description>Pointer to the ECB data structure (see Table 1 ECB data structure overview)</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + </registers> + </peripheral> + <peripheral> + <name>CCM</name> + <description>AES CCM Mode Encryption</description> + <groupName>CCM</groupName> + <baseAddress>0x4000F000</baseAddress> + <size>32</size> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>CCM_AAR</name> + <value>15</value> + </interrupt> + <registers> + <register> + <name>TASKS_KSGEN</name> + <description>Start generation of key-stream. This operation will stop by itself when completed.</description> + <addressOffset>0x000</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_KSGEN</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_CRYPT</name> + <description>Start encryption/decryption. This operation will stop by itself when completed.</description> + <addressOffset>0x004</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_CRYPT</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_STOP</name> + <description>Stop encryption/decryption</description> + <addressOffset>0x008</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STOP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_RATEOVERRIDE</name> + <description>Override DATARATE setting in MODE register with the contents of the RATEOVERRIDE register for any ongoing encryption/decryption</description> + <addressOffset>0x00C</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_RATEOVERRIDE</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_ENDKSGEN</name> + <description>Key-stream generation complete</description> + <addressOffset>0x100</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_ENDKSGEN</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_ENDCRYPT</name> + <description>Encrypt/decrypt complete</description> + <addressOffset>0x104</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_ENDCRYPT</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_ERROR</name> + <description>Deprecated register - CCM error event</description> + <addressOffset>0x108</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_ERROR</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>SHORTS</name> + <description>Shortcut register</description> + <addressOffset>0x200</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ENDKSGEN_CRYPT</name> + <description>Shortcut between ENDKSGEN event and CRYPT task</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ENDKSGEN</name> + <description>Write '1' to Enable interrupt for ENDKSGEN event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENDCRYPT</name> + <description>Write '1' to Enable interrupt for ENDCRYPT event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ERROR</name> + <description>Write '1' to Enable interrupt for ERROR event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ENDKSGEN</name> + <description>Write '1' to Disable interrupt for ENDKSGEN event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ENDCRYPT</name> + <description>Write '1' to Disable interrupt for ENDCRYPT event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ERROR</name> + <description>Write '1' to Disable interrupt for ERROR event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>MICSTATUS</name> + <description>MIC check result</description> + <addressOffset>0x400</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>MICSTATUS</name> + <description>The result of the MIC check performed during the previous decryption operation</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>CheckFailed</name> + <description>MIC check failed</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>CheckPassed</name> + <description>MIC check passed</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>ENABLE</name> + <description>Enable</description> + <addressOffset>0x500</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ENABLE</name> + <description>Enable or disable CCM</description> + <lsb>0</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>2</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>MODE</name> + <description>Operation mode</description> + <addressOffset>0x504</addressOffset> + <access>read-write</access> + <resetValue>0x00000001</resetValue> + <fields> + <field> + <name>MODE</name> + <description>The mode of operation to be used. The settings in this register apply whenever either the KSGEN or CRYPT tasks are triggered.</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Encryption</name> + <description>AES CCM packet encryption mode</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Decryption</name> + <description>AES CCM packet decryption mode</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DATARATE</name> + <description>Radio data rate that the CCM shall run synchronous with</description> + <lsb>16</lsb> + <msb>17</msb> + <enumeratedValues> + <enumeratedValue> + <name>1Mbit</name> + <description>1 Mbps</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>2Mbit</name> + <description>2 Mbps</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>125Kbps</name> + <description>125 Kbps</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>500Kbps</name> + <description>500 Kbps</description> + <value>3</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>LENGTH</name> + <description>Packet length configuration</description> + <lsb>24</lsb> + <msb>24</msb> + <enumeratedValues> + <enumeratedValue> + <name>Default</name> + <description>Default length. Effective length of LENGTH field in encrypted/decrypted packet is 5 bits. A key-stream for packet payloads up to 27 bytes will be generated.</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Extended</name> + <description>Extended length. Effective length of LENGTH field in encrypted/decrypted packet is 8 bits. A key-stream for packet payloads up to MAXPACKETSIZE bytes will be generated.</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>CNFPTR</name> + <description>Pointer to data structure holding AES key and NONCE vector</description> + <addressOffset>0x508</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>CNFPTR</name> + <description>Pointer to the data structure holding the AES key and the CCM NONCE vector (see Table 1 CCM data structure overview)</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>INPTR</name> + <description>Input pointer</description> + <addressOffset>0x50C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>INPTR</name> + <description>Input pointer</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>OUTPTR</name> + <description>Output pointer</description> + <addressOffset>0x510</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>OUTPTR</name> + <description>Output pointer</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>SCRATCHPTR</name> + <description>Pointer to data area used for temporary storage</description> + <addressOffset>0x514</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>SCRATCHPTR</name> + <description>Pointer to a scratch data area used for temporary storage during key-stream generation, MIC generation and encryption/decryption.</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>MAXPACKETSIZE</name> + <description>Length of key-stream generated when MODE.LENGTH = Extended.</description> + <addressOffset>0x518</addressOffset> + <access>read-write</access> + <resetValue>0x000000FB</resetValue> + <fields> + <field> + <name>MAXPACKETSIZE</name> + <description>Length of key-stream generated when MODE.LENGTH = Extended. This value must be greater or equal to the subsequent packet payload to be encrypted/decrypted.</description> + <lsb>0</lsb> + <msb>7</msb> + </field> + </fields> + </register> + <register> + <name>RATEOVERRIDE</name> + <description>Data rate override setting.</description> + <addressOffset>0x51C</addressOffset> + <access>read-write</access> + <resetValue>0x00000000</resetValue> + <fields> + <field> + <name>RATEOVERRIDE</name> + <description>Data rate override setting.</description> + <lsb>0</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>1Mbit</name> + <description>1 Mbps</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>2Mbit</name> + <description>2 Mbps</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>125Kbps</name> + <description>125 Kbps</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>500Kbps</name> + <description>500 Kbps</description> + <value>3</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </registers> + </peripheral> + <peripheral> + <name>AAR</name> + <description>Accelerated Address Resolver</description> + <groupName>AAR</groupName> + <baseAddress>0x4000F000</baseAddress> + <size>32</size> + <alternatePeripheral>CCM</alternatePeripheral> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>CCM_AAR</name> + <value>15</value> + </interrupt> + <registers> + <register> + <name>TASKS_START</name> + <description>Start resolving addresses based on IRKs specified in the IRK data structure</description> + <addressOffset>0x000</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_START</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_STOP</name> + <description>Stop resolving addresses</description> + <addressOffset>0x008</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STOP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_END</name> + <description>Address resolution procedure complete</description> + <addressOffset>0x100</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_END</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_RESOLVED</name> + <description>Address resolved</description> + <addressOffset>0x104</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_RESOLVED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_NOTRESOLVED</name> + <description>Address not resolved</description> + <addressOffset>0x108</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_NOTRESOLVED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>END</name> + <description>Write '1' to Enable interrupt for END event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RESOLVED</name> + <description>Write '1' to Enable interrupt for RESOLVED event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>NOTRESOLVED</name> + <description>Write '1' to Enable interrupt for NOTRESOLVED event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>END</name> + <description>Write '1' to Disable interrupt for END event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RESOLVED</name> + <description>Write '1' to Disable interrupt for RESOLVED event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>NOTRESOLVED</name> + <description>Write '1' to Disable interrupt for NOTRESOLVED event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>STATUS</name> + <description>Resolution status</description> + <addressOffset>0x400</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>STATUS</name> + <description>The IRK that was used last time an address was resolved</description> + <lsb>0</lsb> + <msb>3</msb> + </field> + </fields> + </register> + <register> + <name>ENABLE</name> + <description>Enable AAR</description> + <addressOffset>0x500</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ENABLE</name> + <description>Enable or disable AAR</description> + <lsb>0</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>3</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>NIRK</name> + <description>Number of IRKs</description> + <addressOffset>0x504</addressOffset> + <access>read-write</access> + <resetValue>0x00000001</resetValue> + <fields> + <field> + <name>NIRK</name> + <description>Number of Identity root keys available in the IRK data structure</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + </fields> + </register> + <register> + <name>IRKPTR</name> + <description>Pointer to IRK data structure</description> + <addressOffset>0x508</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>IRKPTR</name> + <description>Pointer to the IRK data structure</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>ADDRPTR</name> + <description>Pointer to the resolvable address</description> + <addressOffset>0x510</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ADDRPTR</name> + <description>Pointer to the resolvable address (6-bytes)</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>SCRATCHPTR</name> + <description>Pointer to data area used for temporary storage</description> + <addressOffset>0x514</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>SCRATCHPTR</name> + <description>Pointer to a scratch data area used for temporary storage during resolution.A space of minimum 3 bytes must be reserved.</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + </registers> + </peripheral> + <peripheral> + <name>WDT</name> + <description>Watchdog Timer</description> + <groupName>WDT</groupName> + <baseAddress>0x40010000</baseAddress> + <size>32</size> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>WDT</name> + <value>16</value> + </interrupt> + <registers> + <register> + <name>TASKS_START</name> + <description>Start the watchdog</description> + <addressOffset>0x000</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_START</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_TIMEOUT</name> + <description>Watchdog timeout</description> + <addressOffset>0x100</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_TIMEOUT</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>TIMEOUT</name> + <description>Write '1' to Enable interrupt for TIMEOUT event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>TIMEOUT</name> + <description>Write '1' to Disable interrupt for TIMEOUT event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>RUNSTATUS</name> + <description>Run status</description> + <addressOffset>0x400</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>RUNSTATUS</name> + <description>Indicates whether or not the watchdog is running</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotRunning</name> + <description>Watchdog not running</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Running</name> + <description>Watchdog is running</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>REQSTATUS</name> + <description>Request status</description> + <addressOffset>0x404</addressOffset> + <access>read-only</access> + <resetValue>0x00000001</resetValue> + <fields> + <field> + <name>RR0</name> + <description>Request status for RR[0] register</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>DisabledOrRequested</name> + <description>RR[0] register is not enabled, or are already requesting reload</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>EnabledAndUnrequested</name> + <description>RR[0] register is enabled, and are not yet requesting reload</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RR1</name> + <description>Request status for RR[1] register</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>DisabledOrRequested</name> + <description>RR[1] register is not enabled, or are already requesting reload</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>EnabledAndUnrequested</name> + <description>RR[1] register is enabled, and are not yet requesting reload</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RR2</name> + <description>Request status for RR[2] register</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>DisabledOrRequested</name> + <description>RR[2] register is not enabled, or are already requesting reload</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>EnabledAndUnrequested</name> + <description>RR[2] register is enabled, and are not yet requesting reload</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RR3</name> + <description>Request status for RR[3] register</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>DisabledOrRequested</name> + <description>RR[3] register is not enabled, or are already requesting reload</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>EnabledAndUnrequested</name> + <description>RR[3] register is enabled, and are not yet requesting reload</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RR4</name> + <description>Request status for RR[4] register</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>DisabledOrRequested</name> + <description>RR[4] register is not enabled, or are already requesting reload</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>EnabledAndUnrequested</name> + <description>RR[4] register is enabled, and are not yet requesting reload</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RR5</name> + <description>Request status for RR[5] register</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <enumeratedValue> + <name>DisabledOrRequested</name> + <description>RR[5] register is not enabled, or are already requesting reload</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>EnabledAndUnrequested</name> + <description>RR[5] register is enabled, and are not yet requesting reload</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RR6</name> + <description>Request status for RR[6] register</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <enumeratedValue> + <name>DisabledOrRequested</name> + <description>RR[6] register is not enabled, or are already requesting reload</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>EnabledAndUnrequested</name> + <description>RR[6] register is enabled, and are not yet requesting reload</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RR7</name> + <description>Request status for RR[7] register</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <enumeratedValue> + <name>DisabledOrRequested</name> + <description>RR[7] register is not enabled, or are already requesting reload</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>EnabledAndUnrequested</name> + <description>RR[7] register is enabled, and are not yet requesting reload</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>CRV</name> + <description>Counter reload value</description> + <addressOffset>0x504</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>CRV</name> + <description>Counter reload value in number of cycles of the 32.768 kHz clock</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>RREN</name> + <description>Enable register for reload request registers</description> + <addressOffset>0x508</addressOffset> + <access>read-write</access> + <resetValue>0x00000001</resetValue> + <fields> + <field> + <name>RR0</name> + <description>Enable or disable RR[0] register</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable RR[0] register</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable RR[0] register</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RR1</name> + <description>Enable or disable RR[1] register</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable RR[1] register</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable RR[1] register</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RR2</name> + <description>Enable or disable RR[2] register</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable RR[2] register</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable RR[2] register</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RR3</name> + <description>Enable or disable RR[3] register</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable RR[3] register</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable RR[3] register</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RR4</name> + <description>Enable or disable RR[4] register</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable RR[4] register</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable RR[4] register</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RR5</name> + <description>Enable or disable RR[5] register</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable RR[5] register</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable RR[5] register</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RR6</name> + <description>Enable or disable RR[6] register</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable RR[6] register</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable RR[6] register</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>RR7</name> + <description>Enable or disable RR[7] register</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable RR[7] register</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable RR[7] register</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>CONFIG</name> + <description>Configuration register</description> + <addressOffset>0x50C</addressOffset> + <access>read-write</access> + <resetValue>0x00000001</resetValue> + <fields> + <field> + <name>SLEEP</name> + <description>Configure the watchdog to either be paused, or kept running, while the CPU is sleeping</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Pause</name> + <description>Pause watchdog while the CPU is sleeping</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Run</name> + <description>Keep the watchdog running while the CPU is sleeping</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>HALT</name> + <description>Configure the watchdog to either be paused, or kept running, while the CPU is halted by the debugger</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Pause</name> + <description>Pause watchdog while the CPU is halted by the debugger</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Run</name> + <description>Keep the watchdog running while the CPU is halted by the debugger</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <dim>8</dim> + <dimIncrement>4</dimIncrement> + <name>RR[%s]</name> + <description>Description collection[0]: Reload request 0</description> + <addressOffset>0x600</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>RR</name> + <description>Reload request register</description> + <lsb>0</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Reload</name> + <description>Value to request a reload of the watchdog timer</description> + <value>0x6E524635</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </registers> + </peripheral> + <peripheral derivedFrom="RTC0"> + <name>RTC1</name> + <description>Real time counter 1</description> + <groupName>RTC</groupName> + <baseAddress>0x40011000</baseAddress> + <size>32</size> + <interrupt> + <name>RTC1</name> + <value>17</value> + </interrupt> + </peripheral> + <peripheral> + <name>QDEC</name> + <description>Quadrature Decoder</description> + <groupName>QDEC</groupName> + <baseAddress>0x40012000</baseAddress> + <size>32</size> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>QDEC</name> + <value>18</value> + </interrupt> + <registers> + <register> + <name>TASKS_START</name> + <description>Task starting the quadrature decoder</description> + <addressOffset>0x000</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_START</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_STOP</name> + <description>Task stopping the quadrature decoder</description> + <addressOffset>0x004</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STOP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_READCLRACC</name> + <description>Read and clear ACC and ACCDBL</description> + <addressOffset>0x008</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_READCLRACC</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_RDCLRACC</name> + <description>Read and clear ACC</description> + <addressOffset>0x00C</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_RDCLRACC</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_RDCLRDBL</name> + <description>Read and clear ACCDBL</description> + <addressOffset>0x010</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_RDCLRDBL</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_SAMPLERDY</name> + <description>Event being generated for every new sample value written to the SAMPLE register</description> + <addressOffset>0x100</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_SAMPLERDY</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_REPORTRDY</name> + <description>Non-null report ready</description> + <addressOffset>0x104</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_REPORTRDY</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_ACCOF</name> + <description>ACC or ACCDBL register overflow</description> + <addressOffset>0x108</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_ACCOF</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_DBLRDY</name> + <description>Double displacement(s) detected</description> + <addressOffset>0x10C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_DBLRDY</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_STOPPED</name> + <description>QDEC has been stopped</description> + <addressOffset>0x110</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_STOPPED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>SHORTS</name> + <description>Shortcut register</description> + <addressOffset>0x200</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>REPORTRDY_READCLRACC</name> + <description>Shortcut between REPORTRDY event and READCLRACC task</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SAMPLERDY_STOP</name> + <description>Shortcut between SAMPLERDY event and STOP task</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REPORTRDY_RDCLRACC</name> + <description>Shortcut between REPORTRDY event and RDCLRACC task</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REPORTRDY_STOP</name> + <description>Shortcut between REPORTRDY event and STOP task</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DBLRDY_RDCLRDBL</name> + <description>Shortcut between DBLRDY event and RDCLRDBL task</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DBLRDY_STOP</name> + <description>Shortcut between DBLRDY event and STOP task</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SAMPLERDY_READCLRACC</name> + <description>Shortcut between SAMPLERDY event and READCLRACC task</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>SAMPLERDY</name> + <description>Write '1' to Enable interrupt for SAMPLERDY event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REPORTRDY</name> + <description>Write '1' to Enable interrupt for REPORTRDY event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ACCOF</name> + <description>Write '1' to Enable interrupt for ACCOF event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DBLRDY</name> + <description>Write '1' to Enable interrupt for DBLRDY event</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>STOPPED</name> + <description>Write '1' to Enable interrupt for STOPPED event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>SAMPLERDY</name> + <description>Write '1' to Disable interrupt for SAMPLERDY event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>REPORTRDY</name> + <description>Write '1' to Disable interrupt for REPORTRDY event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>ACCOF</name> + <description>Write '1' to Disable interrupt for ACCOF event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DBLRDY</name> + <description>Write '1' to Disable interrupt for DBLRDY event</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>STOPPED</name> + <description>Write '1' to Disable interrupt for STOPPED event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>ENABLE</name> + <description>Enable the quadrature decoder</description> + <addressOffset>0x500</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ENABLE</name> + <description>Enable or disable the quadrature decoder</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>LEDPOL</name> + <description>LED output pin polarity</description> + <addressOffset>0x504</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>LEDPOL</name> + <description>LED output pin polarity</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>ActiveLow</name> + <description>Led active on output pin low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>ActiveHigh</name> + <description>Led active on output pin high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>SAMPLEPER</name> + <description>Sample period</description> + <addressOffset>0x508</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>SAMPLEPER</name> + <description>Sample period. The SAMPLE register will be updated for every new sample</description> + <lsb>0</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>128us</name> + <description>128 us</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>256us</name> + <description>256 us</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>512us</name> + <description>512 us</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>1024us</name> + <description>1024 us</description> + <value>3</value> + </enumeratedValue> + <enumeratedValue> + <name>2048us</name> + <description>2048 us</description> + <value>4</value> + </enumeratedValue> + <enumeratedValue> + <name>4096us</name> + <description>4096 us</description> + <value>5</value> + </enumeratedValue> + <enumeratedValue> + <name>8192us</name> + <description>8192 us</description> + <value>6</value> + </enumeratedValue> + <enumeratedValue> + <name>16384us</name> + <description>16384 us</description> + <value>7</value> + </enumeratedValue> + <enumeratedValue> + <name>32ms</name> + <description>32768 us</description> + <value>8</value> + </enumeratedValue> + <enumeratedValue> + <name>65ms</name> + <description>65536 us</description> + <value>9</value> + </enumeratedValue> + <enumeratedValue> + <name>131ms</name> + <description>131072 us</description> + <value>10</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>SAMPLE</name> + <description>Motion sample value</description> + <addressOffset>0x50C</addressOffset> + <access>read-only</access> + <dataType>int32_t</dataType> + <fields> + <field> + <name>SAMPLE</name> + <description>Last motion sample</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>REPORTPER</name> + <description>Number of samples to be taken before REPORTRDY and DBLRDY events can be generated</description> + <addressOffset>0x510</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>REPORTPER</name> + <description>Specifies the number of samples to be accumulated in the ACC register before the REPORTRDY and DBLRDY events can be generated</description> + <lsb>0</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>10Smpl</name> + <description>10 samples / report</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>40Smpl</name> + <description>40 samples / report</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>80Smpl</name> + <description>80 samples / report</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>120Smpl</name> + <description>120 samples / report</description> + <value>3</value> + </enumeratedValue> + <enumeratedValue> + <name>160Smpl</name> + <description>160 samples / report</description> + <value>4</value> + </enumeratedValue> + <enumeratedValue> + <name>200Smpl</name> + <description>200 samples / report</description> + <value>5</value> + </enumeratedValue> + <enumeratedValue> + <name>240Smpl</name> + <description>240 samples / report</description> + <value>6</value> + </enumeratedValue> + <enumeratedValue> + <name>280Smpl</name> + <description>280 samples / report</description> + <value>7</value> + </enumeratedValue> + <enumeratedValue> + <name>1Smpl</name> + <description>1 sample / report</description> + <value>8</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>ACC</name> + <description>Register accumulating the valid transitions</description> + <addressOffset>0x514</addressOffset> + <access>read-only</access> + <dataType>int32_t</dataType> + <fields> + <field> + <name>ACC</name> + <description>Register accumulating all valid samples (not double transition) read from the SAMPLE register</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>ACCREAD</name> + <description>Snapshot of the ACC register, updated by the READCLRACC or RDCLRACC task</description> + <addressOffset>0x518</addressOffset> + <access>read-only</access> + <dataType>int32_t</dataType> + <fields> + <field> + <name>ACCREAD</name> + <description>Snapshot of the ACC register.</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <cluster> + <name>PSEL</name> + <description>Unspecified</description> + <headerStructName>QDEC_PSEL</headerStructName> + <addressOffset>0x51C</addressOffset> + <register> + <name>LED</name> + <description>Pin select for LED signal</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>Pin number</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>A</name> + <description>Pin select for A signal</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>Pin number</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>B</name> + <description>Pin select for B signal</description> + <addressOffset>0x008</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>Pin number</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </cluster> + <register> + <name>DBFEN</name> + <description>Enable input debounce filters</description> + <addressOffset>0x528</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>DBFEN</name> + <description>Enable input debounce filters</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Debounce input filters disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Debounce input filters enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>LEDPRE</name> + <description>Time period the LED is switched ON prior to sampling</description> + <addressOffset>0x540</addressOffset> + <access>read-write</access> + <resetValue>0x00000010</resetValue> + <fields> + <field> + <name>LEDPRE</name> + <description>Period in us the LED is switched on prior to sampling</description> + <lsb>0</lsb> + <msb>8</msb> + </field> + </fields> + </register> + <register> + <name>ACCDBL</name> + <description>Register accumulating the number of detected double transitions</description> + <addressOffset>0x544</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>ACCDBL</name> + <description>Register accumulating the number of detected double or illegal transitions. ( SAMPLE = 2 ).</description> + <lsb>0</lsb> + <msb>3</msb> + </field> + </fields> + </register> + <register> + <name>ACCDBLREAD</name> + <description>Snapshot of the ACCDBL, updated by the READCLRACC or RDCLRDBL task</description> + <addressOffset>0x548</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>ACCDBLREAD</name> + <description>Snapshot of the ACCDBL register. This field is updated when the READCLRACC or RDCLRDBL task is triggered.</description> + <lsb>0</lsb> + <msb>3</msb> + </field> + </fields> + </register> + </registers> + </peripheral> + <peripheral> + <name>COMP</name> + <description>Comparator</description> + <groupName>COMP</groupName> + <baseAddress>0x40013000</baseAddress> + <size>32</size> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>COMP</name> + <value>19</value> + </interrupt> + <registers> + <register> + <name>TASKS_START</name> + <description>Start comparator</description> + <addressOffset>0x000</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_START</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_STOP</name> + <description>Stop comparator</description> + <addressOffset>0x004</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STOP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_SAMPLE</name> + <description>Sample comparator value</description> + <addressOffset>0x008</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_SAMPLE</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_READY</name> + <description>COMP is ready and output is valid</description> + <addressOffset>0x100</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_READY</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_DOWN</name> + <description>Downward crossing</description> + <addressOffset>0x104</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_DOWN</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_UP</name> + <description>Upward crossing</description> + <addressOffset>0x108</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_UP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_CROSS</name> + <description>Downward or upward crossing</description> + <addressOffset>0x10C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_CROSS</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>SHORTS</name> + <description>Shortcut register</description> + <addressOffset>0x200</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>READY_SAMPLE</name> + <description>Shortcut between READY event and SAMPLE task</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>READY_STOP</name> + <description>Shortcut between READY event and STOP task</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DOWN_STOP</name> + <description>Shortcut between DOWN event and STOP task</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>UP_STOP</name> + <description>Shortcut between UP event and STOP task</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CROSS_STOP</name> + <description>Shortcut between CROSS event and STOP task</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTEN</name> + <description>Enable or disable interrupt</description> + <addressOffset>0x300</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>READY</name> + <description>Enable or disable interrupt for READY event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DOWN</name> + <description>Enable or disable interrupt for DOWN event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>UP</name> + <description>Enable or disable interrupt for UP event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CROSS</name> + <description>Enable or disable interrupt for CROSS event</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>READY</name> + <description>Write '1' to Enable interrupt for READY event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DOWN</name> + <description>Write '1' to Enable interrupt for DOWN event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>UP</name> + <description>Write '1' to Enable interrupt for UP event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CROSS</name> + <description>Write '1' to Enable interrupt for CROSS event</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>READY</name> + <description>Write '1' to Disable interrupt for READY event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DOWN</name> + <description>Write '1' to Disable interrupt for DOWN event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>UP</name> + <description>Write '1' to Disable interrupt for UP event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CROSS</name> + <description>Write '1' to Disable interrupt for CROSS event</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>RESULT</name> + <description>Compare result</description> + <addressOffset>0x400</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>RESULT</name> + <description>Result of last compare. Decision point SAMPLE task.</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Below</name> + <description>Input voltage is below the threshold (VIN+ &lt; VIN-)</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Above</name> + <description>Input voltage is above the threshold (VIN+ &gt; VIN-)</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>ENABLE</name> + <description>COMP enable</description> + <addressOffset>0x500</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ENABLE</name> + <description>Enable or disable COMP</description> + <lsb>0</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>2</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>PSEL</name> + <description>Pin select</description> + <addressOffset>0x504</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>PSEL</name> + <description>Analog pin select</description> + <lsb>0</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>AnalogInput0</name> + <description>AIN0 selected as analog input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput1</name> + <description>AIN1 selected as analog input</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput2</name> + <description>AIN2 selected as analog input</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput3</name> + <description>AIN3 selected as analog input</description> + <value>3</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput4</name> + <description>AIN4 selected as analog input</description> + <value>4</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput5</name> + <description>AIN5 selected as analog input</description> + <value>5</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogInput6</name> + <description>AIN6 selected as analog input</description> + <value>6</value> + </enumeratedValue> + <enumeratedValue> + <name>VddDiv2</name> + <description>VDD/2 selected as analog input</description> + <value>7</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>REFSEL</name> + <description>Reference source select for single-ended mode</description> + <addressOffset>0x508</addressOffset> + <access>read-write</access> + <resetValue>0x00000004</resetValue> + <fields> + <field> + <name>REFSEL</name> + <description>Reference select</description> + <lsb>0</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Int1V2</name> + <description>VREF = internal 1.2 V reference (VDD &gt;= 1.7 V)</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Int1V8</name> + <description>VREF = internal 1.8 V reference (VDD &gt;= VREF + 0.2 V)</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Int2V4</name> + <description>VREF = internal 2.4 V reference (VDD &gt;= VREF + 0.2 V)</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>VDD</name> + <description>VREF = VDD</description> + <value>4</value> + </enumeratedValue> + <enumeratedValue> + <name>ARef</name> + <description>VREF = AREF (VDD &gt;= VREF &gt;= AREFMIN)</description> + <value>5</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>EXTREFSEL</name> + <description>External reference select</description> + <addressOffset>0x50C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EXTREFSEL</name> + <description>External analog reference select</description> + <lsb>0</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>AnalogReference0</name> + <description>Use AIN0 as external analog reference</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogReference1</name> + <description>Use AIN1 as external analog reference</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogReference2</name> + <description>Use AIN2 as external analog reference</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogReference3</name> + <description>Use AIN3 as external analog reference</description> + <value>3</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogReference4</name> + <description>Use AIN4 as external analog reference</description> + <value>4</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogReference5</name> + <description>Use AIN5 as external analog reference</description> + <value>5</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogReference6</name> + <description>Use AIN6 as external analog reference</description> + <value>6</value> + </enumeratedValue> + <enumeratedValue> + <name>AnalogReference7</name> + <description>Use AIN7 as external analog reference</description> + <value>7</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>TH</name> + <description>Threshold configuration for hysteresis unit</description> + <addressOffset>0x530</addressOffset> + <access>read-write</access> + <resetValue>0x00000000</resetValue> + <fields> + <field> + <name>THDOWN</name> + <description>VDOWN = (THDOWN+1)/64*VREF</description> + <lsb>0</lsb> + <msb>5</msb> + </field> + <field> + <name>THUP</name> + <description>VUP = (THUP+1)/64*VREF</description> + <lsb>8</lsb> + <msb>13</msb> + </field> + </fields> + </register> + <register> + <name>MODE</name> + <description>Mode configuration</description> + <addressOffset>0x534</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>SP</name> + <description>Speed and power modes</description> + <lsb>0</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Low-power mode</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Normal</name> + <description>Normal mode</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>High-speed mode</description> + <value>2</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>MAIN</name> + <description>Main operation modes</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <enumeratedValue> + <name>SE</name> + <description>Single-ended mode</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Diff</name> + <description>Differential mode</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>HYST</name> + <description>Comparator hysteresis enable</description> + <addressOffset>0x538</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>HYST</name> + <description>Comparator hysteresis</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>NoHyst</name> + <description>Comparator hysteresis disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Hyst50mV</name> + <description>Comparator hysteresis enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </registers> + </peripheral> + <peripheral> + <name>SWI0</name> + <description>Software interrupt 0</description> + <groupName>SWI</groupName> + <baseAddress>0x40014000</baseAddress> + <size>32</size> + <headerStructName>SWI</headerStructName> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>SWI0_EGU0</name> + <value>20</value> + </interrupt> + <registers> + <register> + <name>UNUSED</name> + <description>Unused.</description> + <addressOffset>0x000</addressOffset> + <resetValue>0x00000000</resetValue> + <access>read-only</access> + </register> + </registers> + </peripheral> + <peripheral> + <name>EGU0</name> + <description>Event Generator Unit 0</description> + <groupName>EGU</groupName> + <baseAddress>0x40014000</baseAddress> + <size>32</size> + <alternatePeripheral>SWI0</alternatePeripheral> + <headerStructName>EGU</headerStructName> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>SWI0_EGU0</name> + <value>20</value> + </interrupt> + <registers> + <register> + <dim>16</dim> + <dimIncrement>4</dimIncrement> + <name>TASKS_TRIGGER[%s]</name> + <description>Description collection[0]: Trigger 0 for triggering the corresponding TRIGGERED[0] event</description> + <addressOffset>0x000</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_TRIGGER</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <dim>16</dim> + <dimIncrement>4</dimIncrement> + <name>EVENTS_TRIGGERED[%s]</name> + <description>Description collection[0]: Event number 0 generated by triggering the corresponding TRIGGER[0] task</description> + <addressOffset>0x100</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_TRIGGERED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>INTEN</name> + <description>Enable or disable interrupt</description> + <addressOffset>0x300</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>TRIGGERED0</name> + <description>Enable or disable interrupt for TRIGGERED[0] event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED1</name> + <description>Enable or disable interrupt for TRIGGERED[1] event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED2</name> + <description>Enable or disable interrupt for TRIGGERED[2] event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED3</name> + <description>Enable or disable interrupt for TRIGGERED[3] event</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED4</name> + <description>Enable or disable interrupt for TRIGGERED[4] event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED5</name> + <description>Enable or disable interrupt for TRIGGERED[5] event</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED6</name> + <description>Enable or disable interrupt for TRIGGERED[6] event</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED7</name> + <description>Enable or disable interrupt for TRIGGERED[7] event</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED8</name> + <description>Enable or disable interrupt for TRIGGERED[8] event</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED9</name> + <description>Enable or disable interrupt for TRIGGERED[9] event</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED10</name> + <description>Enable or disable interrupt for TRIGGERED[10] event</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED11</name> + <description>Enable or disable interrupt for TRIGGERED[11] event</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED12</name> + <description>Enable or disable interrupt for TRIGGERED[12] event</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED13</name> + <description>Enable or disable interrupt for TRIGGERED[13] event</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED14</name> + <description>Enable or disable interrupt for TRIGGERED[14] event</description> + <lsb>14</lsb> + <msb>14</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED15</name> + <description>Enable or disable interrupt for TRIGGERED[15] event</description> + <lsb>15</lsb> + <msb>15</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>TRIGGERED0</name> + <description>Write '1' to Enable interrupt for TRIGGERED[0] event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED1</name> + <description>Write '1' to Enable interrupt for TRIGGERED[1] event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED2</name> + <description>Write '1' to Enable interrupt for TRIGGERED[2] event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED3</name> + <description>Write '1' to Enable interrupt for TRIGGERED[3] event</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED4</name> + <description>Write '1' to Enable interrupt for TRIGGERED[4] event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED5</name> + <description>Write '1' to Enable interrupt for TRIGGERED[5] event</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED6</name> + <description>Write '1' to Enable interrupt for TRIGGERED[6] event</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED7</name> + <description>Write '1' to Enable interrupt for TRIGGERED[7] event</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED8</name> + <description>Write '1' to Enable interrupt for TRIGGERED[8] event</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED9</name> + <description>Write '1' to Enable interrupt for TRIGGERED[9] event</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED10</name> + <description>Write '1' to Enable interrupt for TRIGGERED[10] event</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED11</name> + <description>Write '1' to Enable interrupt for TRIGGERED[11] event</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED12</name> + <description>Write '1' to Enable interrupt for TRIGGERED[12] event</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED13</name> + <description>Write '1' to Enable interrupt for TRIGGERED[13] event</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED14</name> + <description>Write '1' to Enable interrupt for TRIGGERED[14] event</description> + <lsb>14</lsb> + <msb>14</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED15</name> + <description>Write '1' to Enable interrupt for TRIGGERED[15] event</description> + <lsb>15</lsb> + <msb>15</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>TRIGGERED0</name> + <description>Write '1' to Disable interrupt for TRIGGERED[0] event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED1</name> + <description>Write '1' to Disable interrupt for TRIGGERED[1] event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED2</name> + <description>Write '1' to Disable interrupt for TRIGGERED[2] event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED3</name> + <description>Write '1' to Disable interrupt for TRIGGERED[3] event</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED4</name> + <description>Write '1' to Disable interrupt for TRIGGERED[4] event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED5</name> + <description>Write '1' to Disable interrupt for TRIGGERED[5] event</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED6</name> + <description>Write '1' to Disable interrupt for TRIGGERED[6] event</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED7</name> + <description>Write '1' to Disable interrupt for TRIGGERED[7] event</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED8</name> + <description>Write '1' to Disable interrupt for TRIGGERED[8] event</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED9</name> + <description>Write '1' to Disable interrupt for TRIGGERED[9] event</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED10</name> + <description>Write '1' to Disable interrupt for TRIGGERED[10] event</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED11</name> + <description>Write '1' to Disable interrupt for TRIGGERED[11] event</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED12</name> + <description>Write '1' to Disable interrupt for TRIGGERED[12] event</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED13</name> + <description>Write '1' to Disable interrupt for TRIGGERED[13] event</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED14</name> + <description>Write '1' to Disable interrupt for TRIGGERED[14] event</description> + <lsb>14</lsb> + <msb>14</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>TRIGGERED15</name> + <description>Write '1' to Disable interrupt for TRIGGERED[15] event</description> + <lsb>15</lsb> + <msb>15</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </registers> + </peripheral> + <peripheral derivedFrom="SWI0"> + <name>SWI1</name> + <description>Software interrupt 1</description> + <groupName>SWI</groupName> + <baseAddress>0x40015000</baseAddress> + <size>32</size> + <interrupt> + <name>SWI1_EGU1</name> + <value>21</value> + </interrupt> + </peripheral> + <peripheral derivedFrom="EGU0"> + <name>EGU1</name> + <description>Event Generator Unit 1</description> + <groupName>EGU</groupName> + <baseAddress>0x40015000</baseAddress> + <size>32</size> + <alternatePeripheral>SWI1</alternatePeripheral> + <interrupt> + <name>SWI1_EGU1</name> + <value>21</value> + </interrupt> + </peripheral> + <peripheral derivedFrom="SWI0"> + <name>SWI2</name> + <description>Software interrupt 2</description> + <groupName>SWI</groupName> + <baseAddress>0x40016000</baseAddress> + <size>32</size> + <interrupt> + <name>SWI2</name> + <value>22</value> + </interrupt> + </peripheral> + <peripheral derivedFrom="SWI0"> + <name>SWI3</name> + <description>Software interrupt 3</description> + <groupName>SWI</groupName> + <baseAddress>0x40017000</baseAddress> + <size>32</size> + <interrupt> + <name>SWI3</name> + <value>23</value> + </interrupt> + </peripheral> + <peripheral derivedFrom="SWI0"> + <name>SWI4</name> + <description>Software interrupt 4</description> + <groupName>SWI</groupName> + <baseAddress>0x40018000</baseAddress> + <size>32</size> + <interrupt> + <name>SWI4</name> + <value>24</value> + </interrupt> + </peripheral> + <peripheral derivedFrom="SWI0"> + <name>SWI5</name> + <description>Software interrupt 5</description> + <groupName>SWI</groupName> + <baseAddress>0x40019000</baseAddress> + <size>32</size> + <interrupt> + <name>SWI5</name> + <value>25</value> + </interrupt> + </peripheral> + <peripheral> + <name>PWM0</name> + <description>Pulse width modulation unit</description> + <groupName>PWM</groupName> + <baseAddress>0x4001C000</baseAddress> + <size>32</size> + <headerStructName>PWM</headerStructName> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>PWM0</name> + <value>28</value> + </interrupt> + <registers> + <register> + <name>TASKS_STOP</name> + <description>Stops PWM pulse generation on all channels at the end of current PWM period, and stops sequence playback</description> + <addressOffset>0x004</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STOP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <dim>2</dim> + <dimIncrement>4</dimIncrement> + <name>TASKS_SEQSTART[%s]</name> + <description>Description collection[0]: Loads the first PWM value on all enabled channels from sequence 0, and starts playing that sequence at the rate defined in SEQ[0]REFRESH and/or DECODER.MODE. Causes PWM generation to start if not running.</description> + <addressOffset>0x008</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_SEQSTART</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_NEXTSTEP</name> + <description>Steps by one value in the current sequence on all enabled channels if DECODER.MODE=NextStep. Does not cause PWM generation to start if not running.</description> + <addressOffset>0x010</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_NEXTSTEP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_STOPPED</name> + <description>Response to STOP task, emitted when PWM pulses are no longer generated</description> + <addressOffset>0x104</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_STOPPED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <dim>2</dim> + <dimIncrement>4</dimIncrement> + <name>EVENTS_SEQSTARTED[%s]</name> + <description>Description collection[0]: First PWM period started on sequence 0</description> + <addressOffset>0x108</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_SEQSTARTED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <dim>2</dim> + <dimIncrement>4</dimIncrement> + <name>EVENTS_SEQEND[%s]</name> + <description>Description collection[0]: Emitted at end of every sequence 0, when last value from RAM has been applied to wave counter</description> + <addressOffset>0x110</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_SEQEND</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_PWMPERIODEND</name> + <description>Emitted at the end of each PWM period</description> + <addressOffset>0x118</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_PWMPERIODEND</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_LOOPSDONE</name> + <description>Concatenated sequences have been played the amount of times defined in LOOP.CNT</description> + <addressOffset>0x11C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_LOOPSDONE</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>SHORTS</name> + <description>Shortcut register</description> + <addressOffset>0x200</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>SEQEND0_STOP</name> + <description>Shortcut between SEQEND[0] event and STOP task</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SEQEND1_STOP</name> + <description>Shortcut between SEQEND[1] event and STOP task</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>LOOPSDONE_SEQSTART0</name> + <description>Shortcut between LOOPSDONE event and SEQSTART[0] task</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>LOOPSDONE_SEQSTART1</name> + <description>Shortcut between LOOPSDONE event and SEQSTART[1] task</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>LOOPSDONE_STOP</name> + <description>Shortcut between LOOPSDONE event and STOP task</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable shortcut</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable shortcut</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTEN</name> + <description>Enable or disable interrupt</description> + <addressOffset>0x300</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>STOPPED</name> + <description>Enable or disable interrupt for STOPPED event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SEQSTARTED0</name> + <description>Enable or disable interrupt for SEQSTARTED[0] event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SEQSTARTED1</name> + <description>Enable or disable interrupt for SEQSTARTED[1] event</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SEQEND0</name> + <description>Enable or disable interrupt for SEQEND[0] event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SEQEND1</name> + <description>Enable or disable interrupt for SEQEND[1] event</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PWMPERIODEND</name> + <description>Enable or disable interrupt for PWMPERIODEND event</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>LOOPSDONE</name> + <description>Enable or disable interrupt for LOOPSDONE event</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>STOPPED</name> + <description>Write '1' to Enable interrupt for STOPPED event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SEQSTARTED0</name> + <description>Write '1' to Enable interrupt for SEQSTARTED[0] event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SEQSTARTED1</name> + <description>Write '1' to Enable interrupt for SEQSTARTED[1] event</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SEQEND0</name> + <description>Write '1' to Enable interrupt for SEQEND[0] event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SEQEND1</name> + <description>Write '1' to Enable interrupt for SEQEND[1] event</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PWMPERIODEND</name> + <description>Write '1' to Enable interrupt for PWMPERIODEND event</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>LOOPSDONE</name> + <description>Write '1' to Enable interrupt for LOOPSDONE event</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>STOPPED</name> + <description>Write '1' to Disable interrupt for STOPPED event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SEQSTARTED0</name> + <description>Write '1' to Disable interrupt for SEQSTARTED[0] event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SEQSTARTED1</name> + <description>Write '1' to Disable interrupt for SEQSTARTED[1] event</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SEQEND0</name> + <description>Write '1' to Disable interrupt for SEQEND[0] event</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SEQEND1</name> + <description>Write '1' to Disable interrupt for SEQEND[1] event</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PWMPERIODEND</name> + <description>Write '1' to Disable interrupt for PWMPERIODEND event</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>LOOPSDONE</name> + <description>Write '1' to Disable interrupt for LOOPSDONE event</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>ENABLE</name> + <description>PWM module enable register</description> + <addressOffset>0x500</addressOffset> + <access>read-write</access> + <resetValue>0x00000000</resetValue> + <fields> + <field> + <name>ENABLE</name> + <description>Enable or disable PWM module</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>MODE</name> + <description>Selects operating mode of the wave counter</description> + <addressOffset>0x504</addressOffset> + <access>read-write</access> + <resetValue>0x00000000</resetValue> + <fields> + <field> + <name>UPDOWN</name> + <description>Selects up mode or up-and-down mode for the counter</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Up</name> + <description>Up counter, edge-aligned PWM duty cycle</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>UpAndDown</name> + <description>Up and down counter, center-aligned PWM duty cycle</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>COUNTERTOP</name> + <description>Value up to which the pulse generator counter counts</description> + <addressOffset>0x508</addressOffset> + <access>read-write</access> + <resetValue>0x000003FF</resetValue> + <fields> + <field> + <name>COUNTERTOP</name> + <description>Value up to which the pulse generator counter counts. This register is ignored when DECODER.MODE=WaveForm and only values from RAM are used.</description> + <lsb>0</lsb> + <msb>14</msb> + </field> + </fields> + </register> + <register> + <name>PRESCALER</name> + <description>Configuration for PWM_CLK</description> + <addressOffset>0x50C</addressOffset> + <access>read-write</access> + <resetValue>0x00000000</resetValue> + <fields> + <field> + <name>PRESCALER</name> + <description>Prescaler of PWM_CLK</description> + <lsb>0</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>DIV_1</name> + <description>Divide by 1 (16MHz)</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>DIV_2</name> + <description>Divide by 2 ( 8MHz)</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>DIV_4</name> + <description>Divide by 4 ( 4MHz)</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>DIV_8</name> + <description>Divide by 8 ( 2MHz)</description> + <value>3</value> + </enumeratedValue> + <enumeratedValue> + <name>DIV_16</name> + <description>Divide by 16 ( 1MHz)</description> + <value>4</value> + </enumeratedValue> + <enumeratedValue> + <name>DIV_32</name> + <description>Divide by 32 ( 500kHz)</description> + <value>5</value> + </enumeratedValue> + <enumeratedValue> + <name>DIV_64</name> + <description>Divide by 64 ( 250kHz)</description> + <value>6</value> + </enumeratedValue> + <enumeratedValue> + <name>DIV_128</name> + <description>Divide by 128 ( 125kHz)</description> + <value>7</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>DECODER</name> + <description>Configuration of the decoder</description> + <addressOffset>0x510</addressOffset> + <access>read-write</access> + <resetValue>0x00000000</resetValue> + <fields> + <field> + <name>LOAD</name> + <description>How a sequence is read from RAM and spread to the compare register</description> + <lsb>0</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Common</name> + <description>1st half word (16-bit) used in all PWM channels 0..3</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Grouped</name> + <description>1st half word (16-bit) used in channel 0..1; 2nd word in channel 2..3</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Individual</name> + <description>1st half word (16-bit) in ch.0; 2nd in ch.1; ...; 4th in ch.3</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>WaveForm</name> + <description>1st half word (16-bit) in ch.0; 2nd in ch.1; ...; 4th in COUNTERTOP</description> + <value>3</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>MODE</name> + <description>Selects source for advancing the active sequence</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <enumeratedValue> + <name>RefreshCount</name> + <description>SEQ[n].REFRESH is used to determine loading internal compare registers</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>NextStep</name> + <description>NEXTSTEP task causes a new value to be loaded to internal compare registers</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>LOOP</name> + <description>Number of playbacks of a loop</description> + <addressOffset>0x514</addressOffset> + <access>read-write</access> + <resetValue>0x00000000</resetValue> + <fields> + <field> + <name>CNT</name> + <description>Number of playbacks of pattern cycles</description> + <lsb>0</lsb> + <msb>15</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Looping disabled (stop at the end of the sequence)</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <cluster> + <dim>2</dim> + <dimIncrement>32</dimIncrement> + <name>SEQ[%s]</name> + <description>Unspecified</description> + <headerStructName>PWM_SEQ</headerStructName> + <addressOffset>0x520</addressOffset> + <register> + <name>PTR</name> + <description>Description cluster[0]: Beginning address in RAM of this sequence</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <resetValue>0x00000000</resetValue> + <fields> + <field> + <name>PTR</name> + <description>Beginning address in RAM of this sequence</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>CNT</name> + <description>Description cluster[0]: Number of values (duty cycles) in this sequence</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <resetValue>0x00000000</resetValue> + <fields> + <field> + <name>CNT</name> + <description>Number of values (duty cycles) in this sequence</description> + <lsb>0</lsb> + <msb>14</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Sequence is disabled, and shall not be started as it is empty</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>REFRESH</name> + <description>Description cluster[0]: Number of additional PWM periods between samples loaded into compare register</description> + <addressOffset>0x008</addressOffset> + <access>read-write</access> + <resetValue>0x00000001</resetValue> + <fields> + <field> + <name>CNT</name> + <description>Number of additional PWM periods between samples loaded into compare register (load every REFRESH.CNT+1 PWM periods)</description> + <lsb>0</lsb> + <msb>23</msb> + <enumeratedValues> + <enumeratedValue> + <name>Continuous</name> + <description>Update every PWM period</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>ENDDELAY</name> + <description>Description cluster[0]: Time added after the sequence</description> + <addressOffset>0x00C</addressOffset> + <access>read-write</access> + <resetValue>0x00000000</resetValue> + <fields> + <field> + <name>CNT</name> + <description>Time added after the sequence in PWM periods</description> + <lsb>0</lsb> + <msb>23</msb> + </field> + </fields> + </register> + </cluster> + <cluster> + <name>PSEL</name> + <description>Unspecified</description> + <headerStructName>PWM_PSEL</headerStructName> + <addressOffset>0x560</addressOffset> + <register> + <dim>4</dim> + <dimIncrement>4</dimIncrement> + <name>OUT[%s]</name> + <description>Description collection[0]: Output pin select for PWM channel 0</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>Pin number</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </cluster> + </registers> + </peripheral> + <peripheral> + <name>PDM</name> + <description>Pulse Density Modulation (Digital Microphone) Interface</description> + <groupName>PDM</groupName> + <baseAddress>0x4001D000</baseAddress> + <size>32</size> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <interrupt> + <name>PDM</name> + <value>29</value> + </interrupt> + <registers> + <register> + <name>TASKS_START</name> + <description>Starts continuous PDM transfer</description> + <addressOffset>0x000</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_START</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>TASKS_STOP</name> + <description>Stops PDM transfer</description> + <addressOffset>0x004</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>TASKS_STOP</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_STARTED</name> + <description>PDM transfer has started</description> + <addressOffset>0x100</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_STARTED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_STOPPED</name> + <description>PDM transfer has finished</description> + <addressOffset>0x104</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_STOPPED</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>EVENTS_END</name> + <description>The PDM has written the last sample specified by SAMPLE.MAXCNT (or the last sample after a STOP task has been received) to Data RAM</description> + <addressOffset>0x108</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EVENTS_END</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>INTEN</name> + <description>Enable or disable interrupt</description> + <addressOffset>0x300</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>STARTED</name> + <description>Enable or disable interrupt for STARTED event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>STOPPED</name> + <description>Enable or disable interrupt for STOPPED event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>END</name> + <description>Enable or disable interrupt for END event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENSET</name> + <description>Enable interrupt</description> + <addressOffset>0x304</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>STARTED</name> + <description>Write '1' to Enable interrupt for STARTED event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>STOPPED</name> + <description>Write '1' to Enable interrupt for STOPPED event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>END</name> + <description>Write '1' to Enable interrupt for END event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>INTENCLR</name> + <description>Disable interrupt</description> + <addressOffset>0x308</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>STARTED</name> + <description>Write '1' to Disable interrupt for STARTED event</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>STOPPED</name> + <description>Write '1' to Disable interrupt for STOPPED event</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>END</name> + <description>Write '1' to Disable interrupt for END event</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: Enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Disable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>ENABLE</name> + <description>PDM module enable register</description> + <addressOffset>0x500</addressOffset> + <access>read-write</access> + <resetValue>0x00000000</resetValue> + <fields> + <field> + <name>ENABLE</name> + <description>Enable or disable PDM module</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>PDMCLKCTRL</name> + <description>PDM clock generator control</description> + <addressOffset>0x504</addressOffset> + <access>read-write</access> + <resetValue>0x08400000</resetValue> + <fields> + <field> + <name>FREQ</name> + <description>PDM_CLK frequency</description> + <lsb>0</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>1000K</name> + <description>PDM_CLK = 32 MHz / 32 = 1.000 MHz</description> + <value>0x08000000</value> + </enumeratedValue> + <enumeratedValue> + <name>Default</name> + <description>PDM_CLK = 32 MHz / 31 = 1.032 MHz</description> + <value>0x08400000</value> + </enumeratedValue> + <enumeratedValue> + <name>1067K</name> + <description>PDM_CLK = 32 MHz / 30 = 1.067 MHz</description> + <value>0x08800000</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>MODE</name> + <description>Defines the routing of the connected PDM microphones' signals</description> + <addressOffset>0x508</addressOffset> + <access>read-write</access> + <resetValue>0x00000000</resetValue> + <fields> + <field> + <name>OPERATION</name> + <description>Mono or stereo operation</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Stereo</name> + <description>Sample and store one pair (Left + Right) of 16bit samples per RAM word R=[31:16]; L=[15:0]</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Mono</name> + <description>Sample and store two successive Left samples (16 bit each) per RAM word L1=[31:16]; L0=[15:0]</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>EDGE</name> + <description>Defines on which PDM_CLK edge Left (or mono) is sampled</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>LeftFalling</name> + <description>Left (or mono) is sampled on falling edge of PDM_CLK</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>LeftRising</name> + <description>Left (or mono) is sampled on rising edge of PDM_CLK</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>GAINL</name> + <description>Left output gain adjustment</description> + <addressOffset>0x518</addressOffset> + <access>read-write</access> + <resetValue>0x00000028</resetValue> + <fields> + <field> + <name>GAINL</name> + <description>Left output gain adjustment, in 0.5 dB steps, around the default module gain (see electrical parameters) 0x00 -20 dB gain adjust 0x01 -19.5 dB gain adjust (...) 0x27 -0.5 dB gain adjust 0x28 0 dB gain adjust 0x29 +0.5 dB gain adjust (...) 0x4F +19.5 dB gain adjust 0x50 +20 dB gain adjust</description> + <lsb>0</lsb> + <msb>6</msb> + <enumeratedValues> + <enumeratedValue> + <name>MinGain</name> + <description>-20dB gain adjustment (minimum)</description> + <value>0x00</value> + </enumeratedValue> + <enumeratedValue> + <name>DefaultGain</name> + <description>0dB gain adjustment ('2500 RMS' requirement)</description> + <value>0x28</value> + </enumeratedValue> + <enumeratedValue> + <name>MaxGain</name> + <description>+20dB gain adjustment (maximum)</description> + <value>0x50</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>GAINR</name> + <description>Right output gain adjustment</description> + <addressOffset>0x51C</addressOffset> + <access>read-write</access> + <resetValue>0x00000028</resetValue> + <fields> + <field> + <name>GAINR</name> + <description>Right output gain adjustment, in 0.5 dB steps, around the default module gain (see electrical parameters)</description> + <lsb>0</lsb> + <msb>7</msb> + <enumeratedValues> + <enumeratedValue> + <name>MinGain</name> + <description>-20dB gain adjustment (minimum)</description> + <value>0x00</value> + </enumeratedValue> + <enumeratedValue> + <name>DefaultGain</name> + <description>0dB gain adjustment ('2500 RMS' requirement)</description> + <value>0x28</value> + </enumeratedValue> + <enumeratedValue> + <name>MaxGain</name> + <description>+20dB gain adjustment (maximum)</description> + <value>0x50</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <cluster> + <name>PSEL</name> + <description>Unspecified</description> + <headerStructName>PDM_PSEL</headerStructName> + <addressOffset>0x540</addressOffset> + <register> + <name>CLK</name> + <description>Pin number configuration for PDM CLK signal</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>Pin number</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>DIN</name> + <description>Pin number configuration for PDM DIN signal</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <resetValue>0xFFFFFFFF</resetValue> + <fields> + <field> + <name>PIN</name> + <description>Pin number</description> + <lsb>0</lsb> + <msb>4</msb> + </field> + <field> + <name>CONNECT</name> + <description>Connection</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disconnected</name> + <description>Disconnect</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Connected</name> + <description>Connect</description> + <value>0</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </cluster> + <cluster> + <name>SAMPLE</name> + <description>Unspecified</description> + <headerStructName>PDM_SAMPLE</headerStructName> + <addressOffset>0x560</addressOffset> + <register> + <name>PTR</name> + <description>RAM address pointer to write samples to with EasyDMA</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>SAMPLEPTR</name> + <description>Address to write PDM samples to over DMA</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>MAXCNT</name> + <description>Number of samples to allocate memory for in EasyDMA mode</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>BUFFSIZE</name> + <description>Length of DMA RAM allocation in number of samples</description> + <lsb>0</lsb> + <msb>14</msb> + </field> + </fields> + </register> + </cluster> + </registers> + </peripheral> + <peripheral> + <name>NVMC</name> + <description>Non-volatile memory controller</description> + <groupName>NVMC</groupName> + <baseAddress>0x4001E000</baseAddress> + <size>32</size> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <registers> + <register> + <name>READY</name> + <description>Ready flag</description> + <addressOffset>0x400</addressOffset> + <access>read-only</access> + <resetValue>0x00000001</resetValue> + <fields> + <field> + <name>READY</name> + <description>NVMC is ready or busy</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Busy</name> + <description>NVMC is busy (ongoing write or erase operation)</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Ready</name> + <description>NVMC is ready</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>CONFIG</name> + <description>Configuration register</description> + <addressOffset>0x504</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>WEN</name> + <description>Program memory access mode. It is strongly recommended to activate erase and write modes only when they are actively used.</description> + <lsb>0</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Ren</name> + <description>Read only access</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Wen</name> + <description>Write enabled</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Een</name> + <description>Erase enabled</description> + <value>2</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>ERASEPCR1</name> + <description>Deprecated register - Register for erasing a page in code area. Equivalent to ERASEPAGE.</description> + <addressOffset>0x508</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ERASEPCR1</name> + <description>Register for erasing a page in code area. Equivalent to ERASEPAGE.</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>ERASEPAGE</name> + <description>Register for erasing a page in code area</description> + <addressOffset>0x508</addressOffset> + <access>read-write</access> + <alternateRegister>ERASEPCR1</alternateRegister> + <fields> + <field> + <name>ERASEPAGE</name> + <description>Register for starting erase of a page in code area.</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>ERASEALL</name> + <description>Register for erasing all non-volatile user memory</description> + <addressOffset>0x50C</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ERASEALL</name> + <description>Erase all non-volatile memory including UICR registers. Note that the erase must be enabled using CONFIG.WEN before the non-volatile memory can be erased.</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>NoOperation</name> + <description>No operation</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Erase</name> + <description>Start erase of chip</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>ERASEPCR0</name> + <description>Deprecated register - Register for erasing a page in code area. Equivalent to ERASEPAGE.</description> + <addressOffset>0x510</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ERASEPCR0</name> + <description>Register for starting erase of a page in code area. Equivalent to ERASEPAGE.</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>ERASEUICR</name> + <description>Register for erasing user information configuration registers</description> + <addressOffset>0x514</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>ERASEUICR</name> + <description>Register starting erase of all user information configuration registers. Note that the erase must be enabled using CONFIG.WEN before the UICR can be erased.</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>NoOperation</name> + <description>No operation</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Erase</name> + <description>Start erase of UICR</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </registers> + </peripheral> + <peripheral> + <name>PPI</name> + <description>Programmable Peripheral Interconnect</description> + <groupName>PPI</groupName> + <baseAddress>0x4001F000</baseAddress> + <size>32</size> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <registers> + <cluster> + <dim>6</dim> + <dimIncrement>8</dimIncrement> + <name>TASKS_CHG[%s]</name> + <description>Channel group tasks</description> + <headerStructName>PPI_TASKS_CHG</headerStructName> + <addressOffset>0x000</addressOffset> + <register> + <name>EN</name> + <description>Description cluster[0]: Enable channel group 0</description> + <addressOffset>0x000</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>EN</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + <register> + <name>DIS</name> + <description>Description cluster[0]: Disable channel group 0</description> + <addressOffset>0x004</addressOffset> + <access>write-only</access> + <fields> + <field> + <name>DIS</name> + <lsb>0</lsb> + <msb>0</msb> + </field> + </fields> + </register> + </cluster> + <register> + <name>CHEN</name> + <description>Channel enable register</description> + <addressOffset>0x500</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>CH0</name> + <description>Enable or disable channel 0</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH1</name> + <description>Enable or disable channel 1</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH2</name> + <description>Enable or disable channel 2</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH3</name> + <description>Enable or disable channel 3</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH4</name> + <description>Enable or disable channel 4</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH5</name> + <description>Enable or disable channel 5</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH6</name> + <description>Enable or disable channel 6</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH7</name> + <description>Enable or disable channel 7</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH8</name> + <description>Enable or disable channel 8</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH9</name> + <description>Enable or disable channel 9</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH10</name> + <description>Enable or disable channel 10</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH11</name> + <description>Enable or disable channel 11</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH12</name> + <description>Enable or disable channel 12</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH13</name> + <description>Enable or disable channel 13</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH14</name> + <description>Enable or disable channel 14</description> + <lsb>14</lsb> + <msb>14</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH15</name> + <description>Enable or disable channel 15</description> + <lsb>15</lsb> + <msb>15</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH16</name> + <description>Enable or disable channel 16</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH17</name> + <description>Enable or disable channel 17</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH18</name> + <description>Enable or disable channel 18</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH19</name> + <description>Enable or disable channel 19</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH20</name> + <description>Enable or disable channel 20</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH21</name> + <description>Enable or disable channel 21</description> + <lsb>21</lsb> + <msb>21</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH22</name> + <description>Enable or disable channel 22</description> + <lsb>22</lsb> + <msb>22</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH23</name> + <description>Enable or disable channel 23</description> + <lsb>23</lsb> + <msb>23</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH24</name> + <description>Enable or disable channel 24</description> + <lsb>24</lsb> + <msb>24</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH25</name> + <description>Enable or disable channel 25</description> + <lsb>25</lsb> + <msb>25</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH26</name> + <description>Enable or disable channel 26</description> + <lsb>26</lsb> + <msb>26</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH27</name> + <description>Enable or disable channel 27</description> + <lsb>27</lsb> + <msb>27</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH28</name> + <description>Enable or disable channel 28</description> + <lsb>28</lsb> + <msb>28</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH29</name> + <description>Enable or disable channel 29</description> + <lsb>29</lsb> + <msb>29</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH30</name> + <description>Enable or disable channel 30</description> + <lsb>30</lsb> + <msb>30</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH31</name> + <description>Enable or disable channel 31</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disable channel</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>CHENSET</name> + <description>Channel enable set register</description> + <addressOffset>0x504</addressOffset> + <access>read-write</access> + <modifiedWriteValues>oneToSet</modifiedWriteValues> + <fields> + <field> + <name>CH0</name> + <description>Channel 0 enable set register. Writing '0' has no effect</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH1</name> + <description>Channel 1 enable set register. Writing '0' has no effect</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH2</name> + <description>Channel 2 enable set register. Writing '0' has no effect</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH3</name> + <description>Channel 3 enable set register. Writing '0' has no effect</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH4</name> + <description>Channel 4 enable set register. Writing '0' has no effect</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH5</name> + <description>Channel 5 enable set register. Writing '0' has no effect</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH6</name> + <description>Channel 6 enable set register. Writing '0' has no effect</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH7</name> + <description>Channel 7 enable set register. Writing '0' has no effect</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH8</name> + <description>Channel 8 enable set register. Writing '0' has no effect</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH9</name> + <description>Channel 9 enable set register. Writing '0' has no effect</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH10</name> + <description>Channel 10 enable set register. Writing '0' has no effect</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH11</name> + <description>Channel 11 enable set register. Writing '0' has no effect</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH12</name> + <description>Channel 12 enable set register. Writing '0' has no effect</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH13</name> + <description>Channel 13 enable set register. Writing '0' has no effect</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH14</name> + <description>Channel 14 enable set register. Writing '0' has no effect</description> + <lsb>14</lsb> + <msb>14</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH15</name> + <description>Channel 15 enable set register. Writing '0' has no effect</description> + <lsb>15</lsb> + <msb>15</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH16</name> + <description>Channel 16 enable set register. Writing '0' has no effect</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH17</name> + <description>Channel 17 enable set register. Writing '0' has no effect</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH18</name> + <description>Channel 18 enable set register. Writing '0' has no effect</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH19</name> + <description>Channel 19 enable set register. Writing '0' has no effect</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH20</name> + <description>Channel 20 enable set register. Writing '0' has no effect</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH21</name> + <description>Channel 21 enable set register. Writing '0' has no effect</description> + <lsb>21</lsb> + <msb>21</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH22</name> + <description>Channel 22 enable set register. Writing '0' has no effect</description> + <lsb>22</lsb> + <msb>22</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH23</name> + <description>Channel 23 enable set register. Writing '0' has no effect</description> + <lsb>23</lsb> + <msb>23</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH24</name> + <description>Channel 24 enable set register. Writing '0' has no effect</description> + <lsb>24</lsb> + <msb>24</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH25</name> + <description>Channel 25 enable set register. Writing '0' has no effect</description> + <lsb>25</lsb> + <msb>25</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH26</name> + <description>Channel 26 enable set register. Writing '0' has no effect</description> + <lsb>26</lsb> + <msb>26</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH27</name> + <description>Channel 27 enable set register. Writing '0' has no effect</description> + <lsb>27</lsb> + <msb>27</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH28</name> + <description>Channel 28 enable set register. Writing '0' has no effect</description> + <lsb>28</lsb> + <msb>28</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH29</name> + <description>Channel 29 enable set register. Writing '0' has no effect</description> + <lsb>29</lsb> + <msb>29</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH30</name> + <description>Channel 30 enable set register. Writing '0' has no effect</description> + <lsb>30</lsb> + <msb>30</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH31</name> + <description>Channel 31 enable set register. Writing '0' has no effect</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: Enable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>CHENCLR</name> + <description>Channel enable clear register</description> + <addressOffset>0x508</addressOffset> + <access>read-write</access> + <modifiedWriteValues>oneToClear</modifiedWriteValues> + <fields> + <field> + <name>CH0</name> + <description>Channel 0 enable clear register. Writing '0' has no effect</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH1</name> + <description>Channel 1 enable clear register. Writing '0' has no effect</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH2</name> + <description>Channel 2 enable clear register. Writing '0' has no effect</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH3</name> + <description>Channel 3 enable clear register. Writing '0' has no effect</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH4</name> + <description>Channel 4 enable clear register. Writing '0' has no effect</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH5</name> + <description>Channel 5 enable clear register. Writing '0' has no effect</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH6</name> + <description>Channel 6 enable clear register. Writing '0' has no effect</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH7</name> + <description>Channel 7 enable clear register. Writing '0' has no effect</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH8</name> + <description>Channel 8 enable clear register. Writing '0' has no effect</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH9</name> + <description>Channel 9 enable clear register. Writing '0' has no effect</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH10</name> + <description>Channel 10 enable clear register. Writing '0' has no effect</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH11</name> + <description>Channel 11 enable clear register. Writing '0' has no effect</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH12</name> + <description>Channel 12 enable clear register. Writing '0' has no effect</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH13</name> + <description>Channel 13 enable clear register. Writing '0' has no effect</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH14</name> + <description>Channel 14 enable clear register. Writing '0' has no effect</description> + <lsb>14</lsb> + <msb>14</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH15</name> + <description>Channel 15 enable clear register. Writing '0' has no effect</description> + <lsb>15</lsb> + <msb>15</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH16</name> + <description>Channel 16 enable clear register. Writing '0' has no effect</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH17</name> + <description>Channel 17 enable clear register. Writing '0' has no effect</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH18</name> + <description>Channel 18 enable clear register. Writing '0' has no effect</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH19</name> + <description>Channel 19 enable clear register. Writing '0' has no effect</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH20</name> + <description>Channel 20 enable clear register. Writing '0' has no effect</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH21</name> + <description>Channel 21 enable clear register. Writing '0' has no effect</description> + <lsb>21</lsb> + <msb>21</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH22</name> + <description>Channel 22 enable clear register. Writing '0' has no effect</description> + <lsb>22</lsb> + <msb>22</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH23</name> + <description>Channel 23 enable clear register. Writing '0' has no effect</description> + <lsb>23</lsb> + <msb>23</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH24</name> + <description>Channel 24 enable clear register. Writing '0' has no effect</description> + <lsb>24</lsb> + <msb>24</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH25</name> + <description>Channel 25 enable clear register. Writing '0' has no effect</description> + <lsb>25</lsb> + <msb>25</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH26</name> + <description>Channel 26 enable clear register. Writing '0' has no effect</description> + <lsb>26</lsb> + <msb>26</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH27</name> + <description>Channel 27 enable clear register. Writing '0' has no effect</description> + <lsb>27</lsb> + <msb>27</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH28</name> + <description>Channel 28 enable clear register. Writing '0' has no effect</description> + <lsb>28</lsb> + <msb>28</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH29</name> + <description>Channel 29 enable clear register. Writing '0' has no effect</description> + <lsb>29</lsb> + <msb>29</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH30</name> + <description>Channel 30 enable clear register. Writing '0' has no effect</description> + <lsb>30</lsb> + <msb>30</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH31</name> + <description>Channel 31 enable clear register. Writing '0' has no effect</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Disabled</name> + <description>Read: channel disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Enabled</name> + <description>Read: channel enabled</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: disable channel</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <cluster> + <dim>20</dim> + <dimIncrement>8</dimIncrement> + <name>CH[%s]</name> + <description>PPI Channel</description> + <headerStructName>PPI_CH</headerStructName> + <addressOffset>0x510</addressOffset> + <register> + <name>EEP</name> + <description>Description cluster[0]: Channel 0 event end-point</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>EEP</name> + <description>Pointer to event register. Accepts only addresses to registers from the Event group.</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + <register> + <name>TEP</name> + <description>Description cluster[0]: Channel 0 task end-point</description> + <addressOffset>0x004</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>TEP</name> + <description>Pointer to task register. Accepts only addresses to registers from the Task group.</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + </cluster> + <register> + <dim>6</dim> + <dimIncrement>4</dimIncrement> + <name>CHG[%s]</name> + <description>Description collection[0]: Channel group 0</description> + <addressOffset>0x800</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>CH0</name> + <description>Include or exclude channel 0</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH1</name> + <description>Include or exclude channel 1</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH2</name> + <description>Include or exclude channel 2</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH3</name> + <description>Include or exclude channel 3</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH4</name> + <description>Include or exclude channel 4</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH5</name> + <description>Include or exclude channel 5</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH6</name> + <description>Include or exclude channel 6</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH7</name> + <description>Include or exclude channel 7</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH8</name> + <description>Include or exclude channel 8</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH9</name> + <description>Include or exclude channel 9</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH10</name> + <description>Include or exclude channel 10</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH11</name> + <description>Include or exclude channel 11</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH12</name> + <description>Include or exclude channel 12</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH13</name> + <description>Include or exclude channel 13</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH14</name> + <description>Include or exclude channel 14</description> + <lsb>14</lsb> + <msb>14</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH15</name> + <description>Include or exclude channel 15</description> + <lsb>15</lsb> + <msb>15</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH16</name> + <description>Include or exclude channel 16</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH17</name> + <description>Include or exclude channel 17</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH18</name> + <description>Include or exclude channel 18</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH19</name> + <description>Include or exclude channel 19</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH20</name> + <description>Include or exclude channel 20</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH21</name> + <description>Include or exclude channel 21</description> + <lsb>21</lsb> + <msb>21</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH22</name> + <description>Include or exclude channel 22</description> + <lsb>22</lsb> + <msb>22</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH23</name> + <description>Include or exclude channel 23</description> + <lsb>23</lsb> + <msb>23</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH24</name> + <description>Include or exclude channel 24</description> + <lsb>24</lsb> + <msb>24</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH25</name> + <description>Include or exclude channel 25</description> + <lsb>25</lsb> + <msb>25</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH26</name> + <description>Include or exclude channel 26</description> + <lsb>26</lsb> + <msb>26</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH27</name> + <description>Include or exclude channel 27</description> + <lsb>27</lsb> + <msb>27</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH28</name> + <description>Include or exclude channel 28</description> + <lsb>28</lsb> + <msb>28</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH29</name> + <description>Include or exclude channel 29</description> + <lsb>29</lsb> + <msb>29</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH30</name> + <description>Include or exclude channel 30</description> + <lsb>30</lsb> + <msb>30</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>CH31</name> + <description>Include or exclude channel 31</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Excluded</name> + <description>Exclude</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Included</name> + <description>Include</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <cluster> + <dim>32</dim> + <dimIncrement>4</dimIncrement> + <name>FORK[%s]</name> + <description>Fork</description> + <headerStructName>PPI_FORK</headerStructName> + <addressOffset>0x910</addressOffset> + <register> + <name>TEP</name> + <description>Description cluster[0]: Channel 0 task end-point</description> + <addressOffset>0x000</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>TEP</name> + <description>Pointer to task register</description> + <lsb>0</lsb> + <msb>31</msb> + </field> + </fields> + </register> + </cluster> + </registers> + </peripheral> + <peripheral> + <name>P0</name> + <description>GPIO Port</description> + <groupName>GPIO</groupName> + <baseAddress>0x50000000</baseAddress> + <size>32</size> + <headerStructName>GPIO</headerStructName> + <addressBlock> + <offset>0</offset> + <size>0x1000</size> + <usage>registers</usage> + </addressBlock> + <registers> + <register> + <name>OUT</name> + <description>Write GPIO port</description> + <addressOffset>0x504</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>PIN0</name> + <description>Pin 0</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN1</name> + <description>Pin 1</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN2</name> + <description>Pin 2</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN3</name> + <description>Pin 3</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN4</name> + <description>Pin 4</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN5</name> + <description>Pin 5</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN6</name> + <description>Pin 6</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN7</name> + <description>Pin 7</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN8</name> + <description>Pin 8</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN9</name> + <description>Pin 9</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN10</name> + <description>Pin 10</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN11</name> + <description>Pin 11</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN12</name> + <description>Pin 12</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN13</name> + <description>Pin 13</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN14</name> + <description>Pin 14</description> + <lsb>14</lsb> + <msb>14</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN15</name> + <description>Pin 15</description> + <lsb>15</lsb> + <msb>15</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN16</name> + <description>Pin 16</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN17</name> + <description>Pin 17</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN18</name> + <description>Pin 18</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN19</name> + <description>Pin 19</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN20</name> + <description>Pin 20</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN21</name> + <description>Pin 21</description> + <lsb>21</lsb> + <msb>21</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN22</name> + <description>Pin 22</description> + <lsb>22</lsb> + <msb>22</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN23</name> + <description>Pin 23</description> + <lsb>23</lsb> + <msb>23</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN24</name> + <description>Pin 24</description> + <lsb>24</lsb> + <msb>24</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN25</name> + <description>Pin 25</description> + <lsb>25</lsb> + <msb>25</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN26</name> + <description>Pin 26</description> + <lsb>26</lsb> + <msb>26</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN27</name> + <description>Pin 27</description> + <lsb>27</lsb> + <msb>27</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN28</name> + <description>Pin 28</description> + <lsb>28</lsb> + <msb>28</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN29</name> + <description>Pin 29</description> + <lsb>29</lsb> + <msb>29</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN30</name> + <description>Pin 30</description> + <lsb>30</lsb> + <msb>30</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN31</name> + <description>Pin 31</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>OUTSET</name> + <description>Set individual bits in GPIO port</description> + <addressOffset>0x508</addressOffset> + <access>read-write</access> + <modifiedWriteValues>oneToSet</modifiedWriteValues> + <fields> + <field> + <name>PIN0</name> + <description>Pin 0</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN1</name> + <description>Pin 1</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN2</name> + <description>Pin 2</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN3</name> + <description>Pin 3</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN4</name> + <description>Pin 4</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN5</name> + <description>Pin 5</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN6</name> + <description>Pin 6</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN7</name> + <description>Pin 7</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN8</name> + <description>Pin 8</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN9</name> + <description>Pin 9</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN10</name> + <description>Pin 10</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN11</name> + <description>Pin 11</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN12</name> + <description>Pin 12</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN13</name> + <description>Pin 13</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN14</name> + <description>Pin 14</description> + <lsb>14</lsb> + <msb>14</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN15</name> + <description>Pin 15</description> + <lsb>15</lsb> + <msb>15</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN16</name> + <description>Pin 16</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN17</name> + <description>Pin 17</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN18</name> + <description>Pin 18</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN19</name> + <description>Pin 19</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN20</name> + <description>Pin 20</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN21</name> + <description>Pin 21</description> + <lsb>21</lsb> + <msb>21</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN22</name> + <description>Pin 22</description> + <lsb>22</lsb> + <msb>22</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN23</name> + <description>Pin 23</description> + <lsb>23</lsb> + <msb>23</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN24</name> + <description>Pin 24</description> + <lsb>24</lsb> + <msb>24</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN25</name> + <description>Pin 25</description> + <lsb>25</lsb> + <msb>25</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN26</name> + <description>Pin 26</description> + <lsb>26</lsb> + <msb>26</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN27</name> + <description>Pin 27</description> + <lsb>27</lsb> + <msb>27</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN28</name> + <description>Pin 28</description> + <lsb>28</lsb> + <msb>28</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN29</name> + <description>Pin 29</description> + <lsb>29</lsb> + <msb>29</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN30</name> + <description>Pin 30</description> + <lsb>30</lsb> + <msb>30</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN31</name> + <description>Pin 31</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets the pin high; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>OUTCLR</name> + <description>Clear individual bits in GPIO port</description> + <addressOffset>0x50C</addressOffset> + <access>read-write</access> + <modifiedWriteValues>oneToClear</modifiedWriteValues> + <fields> + <field> + <name>PIN0</name> + <description>Pin 0</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN1</name> + <description>Pin 1</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN2</name> + <description>Pin 2</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN3</name> + <description>Pin 3</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN4</name> + <description>Pin 4</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN5</name> + <description>Pin 5</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN6</name> + <description>Pin 6</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN7</name> + <description>Pin 7</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN8</name> + <description>Pin 8</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN9</name> + <description>Pin 9</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN10</name> + <description>Pin 10</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN11</name> + <description>Pin 11</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN12</name> + <description>Pin 12</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN13</name> + <description>Pin 13</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN14</name> + <description>Pin 14</description> + <lsb>14</lsb> + <msb>14</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN15</name> + <description>Pin 15</description> + <lsb>15</lsb> + <msb>15</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN16</name> + <description>Pin 16</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN17</name> + <description>Pin 17</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN18</name> + <description>Pin 18</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN19</name> + <description>Pin 19</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN20</name> + <description>Pin 20</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN21</name> + <description>Pin 21</description> + <lsb>21</lsb> + <msb>21</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN22</name> + <description>Pin 22</description> + <lsb>22</lsb> + <msb>22</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN23</name> + <description>Pin 23</description> + <lsb>23</lsb> + <msb>23</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN24</name> + <description>Pin 24</description> + <lsb>24</lsb> + <msb>24</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN25</name> + <description>Pin 25</description> + <lsb>25</lsb> + <msb>25</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN26</name> + <description>Pin 26</description> + <lsb>26</lsb> + <msb>26</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN27</name> + <description>Pin 27</description> + <lsb>27</lsb> + <msb>27</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN28</name> + <description>Pin 28</description> + <lsb>28</lsb> + <msb>28</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN29</name> + <description>Pin 29</description> + <lsb>29</lsb> + <msb>29</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN30</name> + <description>Pin 30</description> + <lsb>30</lsb> + <msb>30</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN31</name> + <description>Pin 31</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Low</name> + <description>Read: pin driver is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Read: pin driver is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets the pin low; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>IN</name> + <description>Read GPIO port</description> + <addressOffset>0x510</addressOffset> + <access>read-only</access> + <fields> + <field> + <name>PIN0</name> + <description>Pin 0</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN1</name> + <description>Pin 1</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN2</name> + <description>Pin 2</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN3</name> + <description>Pin 3</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN4</name> + <description>Pin 4</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN5</name> + <description>Pin 5</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN6</name> + <description>Pin 6</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN7</name> + <description>Pin 7</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN8</name> + <description>Pin 8</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN9</name> + <description>Pin 9</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN10</name> + <description>Pin 10</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN11</name> + <description>Pin 11</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN12</name> + <description>Pin 12</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN13</name> + <description>Pin 13</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN14</name> + <description>Pin 14</description> + <lsb>14</lsb> + <msb>14</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN15</name> + <description>Pin 15</description> + <lsb>15</lsb> + <msb>15</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN16</name> + <description>Pin 16</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN17</name> + <description>Pin 17</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN18</name> + <description>Pin 18</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN19</name> + <description>Pin 19</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN20</name> + <description>Pin 20</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN21</name> + <description>Pin 21</description> + <lsb>21</lsb> + <msb>21</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN22</name> + <description>Pin 22</description> + <lsb>22</lsb> + <msb>22</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN23</name> + <description>Pin 23</description> + <lsb>23</lsb> + <msb>23</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN24</name> + <description>Pin 24</description> + <lsb>24</lsb> + <msb>24</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN25</name> + <description>Pin 25</description> + <lsb>25</lsb> + <msb>25</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN26</name> + <description>Pin 26</description> + <lsb>26</lsb> + <msb>26</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN27</name> + <description>Pin 27</description> + <lsb>27</lsb> + <msb>27</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN28</name> + <description>Pin 28</description> + <lsb>28</lsb> + <msb>28</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN29</name> + <description>Pin 29</description> + <lsb>29</lsb> + <msb>29</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN30</name> + <description>Pin 30</description> + <lsb>30</lsb> + <msb>30</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN31</name> + <description>Pin 31</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Low</name> + <description>Pin input is low</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Pin input is high</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>DIR</name> + <description>Direction of GPIO pins</description> + <addressOffset>0x514</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>PIN0</name> + <description>Pin 0</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN1</name> + <description>Pin 1</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN2</name> + <description>Pin 2</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN3</name> + <description>Pin 3</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN4</name> + <description>Pin 4</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN5</name> + <description>Pin 5</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN6</name> + <description>Pin 6</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN7</name> + <description>Pin 7</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN8</name> + <description>Pin 8</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN9</name> + <description>Pin 9</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN10</name> + <description>Pin 10</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN11</name> + <description>Pin 11</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN12</name> + <description>Pin 12</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN13</name> + <description>Pin 13</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN14</name> + <description>Pin 14</description> + <lsb>14</lsb> + <msb>14</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN15</name> + <description>Pin 15</description> + <lsb>15</lsb> + <msb>15</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN16</name> + <description>Pin 16</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN17</name> + <description>Pin 17</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN18</name> + <description>Pin 18</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN19</name> + <description>Pin 19</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN20</name> + <description>Pin 20</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN21</name> + <description>Pin 21</description> + <lsb>21</lsb> + <msb>21</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN22</name> + <description>Pin 22</description> + <lsb>22</lsb> + <msb>22</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN23</name> + <description>Pin 23</description> + <lsb>23</lsb> + <msb>23</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN24</name> + <description>Pin 24</description> + <lsb>24</lsb> + <msb>24</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN25</name> + <description>Pin 25</description> + <lsb>25</lsb> + <msb>25</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN26</name> + <description>Pin 26</description> + <lsb>26</lsb> + <msb>26</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN27</name> + <description>Pin 27</description> + <lsb>27</lsb> + <msb>27</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN28</name> + <description>Pin 28</description> + <lsb>28</lsb> + <msb>28</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN29</name> + <description>Pin 29</description> + <lsb>29</lsb> + <msb>29</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN30</name> + <description>Pin 30</description> + <lsb>30</lsb> + <msb>30</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN31</name> + <description>Pin 31</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>DIRSET</name> + <description>DIR set register</description> + <addressOffset>0x518</addressOffset> + <access>read-write</access> + <modifiedWriteValues>oneToSet</modifiedWriteValues> + <fields> + <field> + <name>PIN0</name> + <description>Set as output pin 0</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN1</name> + <description>Set as output pin 1</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN2</name> + <description>Set as output pin 2</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN3</name> + <description>Set as output pin 3</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN4</name> + <description>Set as output pin 4</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN5</name> + <description>Set as output pin 5</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN6</name> + <description>Set as output pin 6</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN7</name> + <description>Set as output pin 7</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN8</name> + <description>Set as output pin 8</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN9</name> + <description>Set as output pin 9</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN10</name> + <description>Set as output pin 10</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN11</name> + <description>Set as output pin 11</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN12</name> + <description>Set as output pin 12</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN13</name> + <description>Set as output pin 13</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN14</name> + <description>Set as output pin 14</description> + <lsb>14</lsb> + <msb>14</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN15</name> + <description>Set as output pin 15</description> + <lsb>15</lsb> + <msb>15</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN16</name> + <description>Set as output pin 16</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN17</name> + <description>Set as output pin 17</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN18</name> + <description>Set as output pin 18</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN19</name> + <description>Set as output pin 19</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN20</name> + <description>Set as output pin 20</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN21</name> + <description>Set as output pin 21</description> + <lsb>21</lsb> + <msb>21</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN22</name> + <description>Set as output pin 22</description> + <lsb>22</lsb> + <msb>22</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN23</name> + <description>Set as output pin 23</description> + <lsb>23</lsb> + <msb>23</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN24</name> + <description>Set as output pin 24</description> + <lsb>24</lsb> + <msb>24</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN25</name> + <description>Set as output pin 25</description> + <lsb>25</lsb> + <msb>25</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN26</name> + <description>Set as output pin 26</description> + <lsb>26</lsb> + <msb>26</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN27</name> + <description>Set as output pin 27</description> + <lsb>27</lsb> + <msb>27</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN28</name> + <description>Set as output pin 28</description> + <lsb>28</lsb> + <msb>28</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN29</name> + <description>Set as output pin 29</description> + <lsb>29</lsb> + <msb>29</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN30</name> + <description>Set as output pin 30</description> + <lsb>30</lsb> + <msb>30</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN31</name> + <description>Set as output pin 31</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Set</name> + <description>Write: writing a '1' sets pin to output; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>DIRCLR</name> + <description>DIR clear register</description> + <addressOffset>0x51C</addressOffset> + <access>read-write</access> + <modifiedWriteValues>oneToClear</modifiedWriteValues> + <fields> + <field> + <name>PIN0</name> + <description>Set as input pin 0</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN1</name> + <description>Set as input pin 1</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN2</name> + <description>Set as input pin 2</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN3</name> + <description>Set as input pin 3</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN4</name> + <description>Set as input pin 4</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN5</name> + <description>Set as input pin 5</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN6</name> + <description>Set as input pin 6</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN7</name> + <description>Set as input pin 7</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN8</name> + <description>Set as input pin 8</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN9</name> + <description>Set as input pin 9</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN10</name> + <description>Set as input pin 10</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN11</name> + <description>Set as input pin 11</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN12</name> + <description>Set as input pin 12</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN13</name> + <description>Set as input pin 13</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN14</name> + <description>Set as input pin 14</description> + <lsb>14</lsb> + <msb>14</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN15</name> + <description>Set as input pin 15</description> + <lsb>15</lsb> + <msb>15</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN16</name> + <description>Set as input pin 16</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN17</name> + <description>Set as input pin 17</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN18</name> + <description>Set as input pin 18</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN19</name> + <description>Set as input pin 19</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN20</name> + <description>Set as input pin 20</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN21</name> + <description>Set as input pin 21</description> + <lsb>21</lsb> + <msb>21</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN22</name> + <description>Set as input pin 22</description> + <lsb>22</lsb> + <msb>22</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN23</name> + <description>Set as input pin 23</description> + <lsb>23</lsb> + <msb>23</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN24</name> + <description>Set as input pin 24</description> + <lsb>24</lsb> + <msb>24</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN25</name> + <description>Set as input pin 25</description> + <lsb>25</lsb> + <msb>25</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN26</name> + <description>Set as input pin 26</description> + <lsb>26</lsb> + <msb>26</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN27</name> + <description>Set as input pin 27</description> + <lsb>27</lsb> + <msb>27</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN28</name> + <description>Set as input pin 28</description> + <lsb>28</lsb> + <msb>28</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN29</name> + <description>Set as input pin 29</description> + <lsb>29</lsb> + <msb>29</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN30</name> + <description>Set as input pin 30</description> + <lsb>30</lsb> + <msb>30</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN31</name> + <description>Set as input pin 31</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <usage>read</usage> + <enumeratedValue> + <name>Input</name> + <description>Read: pin set as input</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Read: pin set as output</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + <enumeratedValues> + <usage>write</usage> + <enumeratedValue> + <name>Clear</name> + <description>Write: writing a '1' sets pin to input; writing a '0' has no effect</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>LATCH</name> + <description>Latch register indicating what GPIO pins that have met the criteria set in the PIN_CNF[n].SENSE registers</description> + <addressOffset>0x520</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>PIN0</name> + <description>Status on whether PIN0 has met criteria set in PIN_CNF0.SENSE register. Write '1' to clear.</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN1</name> + <description>Status on whether PIN1 has met criteria set in PIN_CNF1.SENSE register. Write '1' to clear.</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN2</name> + <description>Status on whether PIN2 has met criteria set in PIN_CNF2.SENSE register. Write '1' to clear.</description> + <lsb>2</lsb> + <msb>2</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN3</name> + <description>Status on whether PIN3 has met criteria set in PIN_CNF3.SENSE register. Write '1' to clear.</description> + <lsb>3</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN4</name> + <description>Status on whether PIN4 has met criteria set in PIN_CNF4.SENSE register. Write '1' to clear.</description> + <lsb>4</lsb> + <msb>4</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN5</name> + <description>Status on whether PIN5 has met criteria set in PIN_CNF5.SENSE register. Write '1' to clear.</description> + <lsb>5</lsb> + <msb>5</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN6</name> + <description>Status on whether PIN6 has met criteria set in PIN_CNF6.SENSE register. Write '1' to clear.</description> + <lsb>6</lsb> + <msb>6</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN7</name> + <description>Status on whether PIN7 has met criteria set in PIN_CNF7.SENSE register. Write '1' to clear.</description> + <lsb>7</lsb> + <msb>7</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN8</name> + <description>Status on whether PIN8 has met criteria set in PIN_CNF8.SENSE register. Write '1' to clear.</description> + <lsb>8</lsb> + <msb>8</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN9</name> + <description>Status on whether PIN9 has met criteria set in PIN_CNF9.SENSE register. Write '1' to clear.</description> + <lsb>9</lsb> + <msb>9</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN10</name> + <description>Status on whether PIN10 has met criteria set in PIN_CNF10.SENSE register. Write '1' to clear.</description> + <lsb>10</lsb> + <msb>10</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN11</name> + <description>Status on whether PIN11 has met criteria set in PIN_CNF11.SENSE register. Write '1' to clear.</description> + <lsb>11</lsb> + <msb>11</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN12</name> + <description>Status on whether PIN12 has met criteria set in PIN_CNF12.SENSE register. Write '1' to clear.</description> + <lsb>12</lsb> + <msb>12</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN13</name> + <description>Status on whether PIN13 has met criteria set in PIN_CNF13.SENSE register. Write '1' to clear.</description> + <lsb>13</lsb> + <msb>13</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN14</name> + <description>Status on whether PIN14 has met criteria set in PIN_CNF14.SENSE register. Write '1' to clear.</description> + <lsb>14</lsb> + <msb>14</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN15</name> + <description>Status on whether PIN15 has met criteria set in PIN_CNF15.SENSE register. Write '1' to clear.</description> + <lsb>15</lsb> + <msb>15</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN16</name> + <description>Status on whether PIN16 has met criteria set in PIN_CNF16.SENSE register. Write '1' to clear.</description> + <lsb>16</lsb> + <msb>16</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN17</name> + <description>Status on whether PIN17 has met criteria set in PIN_CNF17.SENSE register. Write '1' to clear.</description> + <lsb>17</lsb> + <msb>17</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN18</name> + <description>Status on whether PIN18 has met criteria set in PIN_CNF18.SENSE register. Write '1' to clear.</description> + <lsb>18</lsb> + <msb>18</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN19</name> + <description>Status on whether PIN19 has met criteria set in PIN_CNF19.SENSE register. Write '1' to clear.</description> + <lsb>19</lsb> + <msb>19</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN20</name> + <description>Status on whether PIN20 has met criteria set in PIN_CNF20.SENSE register. Write '1' to clear.</description> + <lsb>20</lsb> + <msb>20</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN21</name> + <description>Status on whether PIN21 has met criteria set in PIN_CNF21.SENSE register. Write '1' to clear.</description> + <lsb>21</lsb> + <msb>21</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN22</name> + <description>Status on whether PIN22 has met criteria set in PIN_CNF22.SENSE register. Write '1' to clear.</description> + <lsb>22</lsb> + <msb>22</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN23</name> + <description>Status on whether PIN23 has met criteria set in PIN_CNF23.SENSE register. Write '1' to clear.</description> + <lsb>23</lsb> + <msb>23</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN24</name> + <description>Status on whether PIN24 has met criteria set in PIN_CNF24.SENSE register. Write '1' to clear.</description> + <lsb>24</lsb> + <msb>24</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN25</name> + <description>Status on whether PIN25 has met criteria set in PIN_CNF25.SENSE register. Write '1' to clear.</description> + <lsb>25</lsb> + <msb>25</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN26</name> + <description>Status on whether PIN26 has met criteria set in PIN_CNF26.SENSE register. Write '1' to clear.</description> + <lsb>26</lsb> + <msb>26</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN27</name> + <description>Status on whether PIN27 has met criteria set in PIN_CNF27.SENSE register. Write '1' to clear.</description> + <lsb>27</lsb> + <msb>27</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN28</name> + <description>Status on whether PIN28 has met criteria set in PIN_CNF28.SENSE register. Write '1' to clear.</description> + <lsb>28</lsb> + <msb>28</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN29</name> + <description>Status on whether PIN29 has met criteria set in PIN_CNF29.SENSE register. Write '1' to clear.</description> + <lsb>29</lsb> + <msb>29</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN30</name> + <description>Status on whether PIN30 has met criteria set in PIN_CNF30.SENSE register. Write '1' to clear.</description> + <lsb>30</lsb> + <msb>30</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PIN31</name> + <description>Status on whether PIN31 has met criteria set in PIN_CNF31.SENSE register. Write '1' to clear.</description> + <lsb>31</lsb> + <msb>31</msb> + <enumeratedValues> + <enumeratedValue> + <name>NotLatched</name> + <description>Criteria has not been met</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Latched</name> + <description>Criteria has been met</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <name>DETECTMODE</name> + <description>Select between default DETECT signal behaviour and LDETECT mode</description> + <addressOffset>0x524</addressOffset> + <access>read-write</access> + <fields> + <field> + <name>DETECTMODE</name> + <description>Select between default DETECT signal behaviour and LDETECT mode</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Default</name> + <description>DETECT directly connected to PIN DETECT signals</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>LDETECT</name> + <description>Use the latched LDETECT behaviour</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + <register> + <dim>32</dim> + <dimIncrement>4</dimIncrement> + <name>PIN_CNF[%s]</name> + <description>Description collection[0]: Configuration of GPIO pins</description> + <addressOffset>0x700</addressOffset> + <access>read-write</access> + <resetValue>0x00000002</resetValue> + <fields> + <field> + <name>DIR</name> + <description>Pin direction. Same physical register as DIR register</description> + <lsb>0</lsb> + <msb>0</msb> + <enumeratedValues> + <enumeratedValue> + <name>Input</name> + <description>Configure pin as an input pin</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Output</name> + <description>Configure pin as an output pin</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>INPUT</name> + <description>Connect or disconnect input buffer</description> + <lsb>1</lsb> + <msb>1</msb> + <enumeratedValues> + <enumeratedValue> + <name>Connect</name> + <description>Connect input buffer</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Disconnect</name> + <description>Disconnect input buffer</description> + <value>1</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>PULL</name> + <description>Pull configuration</description> + <lsb>2</lsb> + <msb>3</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>No pull</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>Pulldown</name> + <description>Pull down on pin</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>Pullup</name> + <description>Pull up on pin</description> + <value>3</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>DRIVE</name> + <description>Drive configuration</description> + <lsb>8</lsb> + <msb>10</msb> + <enumeratedValues> + <enumeratedValue> + <name>S0S1</name> + <description>Standard '0', standard '1'</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>H0S1</name> + <description>High drive '0', standard '1'</description> + <value>1</value> + </enumeratedValue> + <enumeratedValue> + <name>S0H1</name> + <description>Standard '0', high drive '1'</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>H0H1</name> + <description>High drive '0', high 'drive '1''</description> + <value>3</value> + </enumeratedValue> + <enumeratedValue> + <name>D0S1</name> + <description>Disconnect '0' standard '1' (normally used for wired-or connections)</description> + <value>4</value> + </enumeratedValue> + <enumeratedValue> + <name>D0H1</name> + <description>Disconnect '0', high drive '1' (normally used for wired-or connections)</description> + <value>5</value> + </enumeratedValue> + <enumeratedValue> + <name>S0D1</name> + <description>Standard '0'. disconnect '1' (normally used for wired-and connections)</description> + <value>6</value> + </enumeratedValue> + <enumeratedValue> + <name>H0D1</name> + <description>High drive '0', disconnect '1' (normally used for wired-and connections)</description> + <value>7</value> + </enumeratedValue> + </enumeratedValues> + </field> + <field> + <name>SENSE</name> + <description>Pin sensing mechanism</description> + <lsb>16</lsb> + <msb>17</msb> + <enumeratedValues> + <enumeratedValue> + <name>Disabled</name> + <description>Disabled</description> + <value>0</value> + </enumeratedValue> + <enumeratedValue> + <name>High</name> + <description>Sense for high level</description> + <value>2</value> + </enumeratedValue> + <enumeratedValue> + <name>Low</name> + <description>Sense for low level</description> + <value>3</value> + </enumeratedValue> + </enumeratedValues> + </field> + </fields> + </register> + </registers> + </peripheral> + </peripherals> +</device>
\ No newline at end of file |