From 3061ecca3d0fdfb87dabbf5f63c9e06c2a30f53a Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Thu, 23 Aug 2018 17:08:59 +0200 Subject: o Initial import. --- .../ant_profiles/ant_bpwr/pages/ant_bpwr_page_1.h | 136 +++++++++++++++++++++ 1 file changed, 136 insertions(+) create mode 100644 thirdparty/nRF5_SDK_15.0.0_a53641a/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_1.h (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_1.h') diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_1.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_1.h new file mode 100644 index 0000000..24604a7 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/ant/ant_profiles/ant_bpwr/pages/ant_bpwr_page_1.h @@ -0,0 +1,136 @@ +/** + * Copyright (c) 2015 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#ifndef ANT_BPWR_PAGE_1_H__ +#define ANT_BPWR_PAGE_1_H__ + +/** @file + * + * @defgroup ant_sdk_profiles_bpwr_page1 Bicycle Power profile page 1 + * @{ + * @ingroup ant_sdk_profiles_bpwr_pages + */ + +#include + +#ifdef __cplusplus +extern "C" { +#endif + +/**@brief BPWR Calibration ID. + */ +typedef enum +{ + ANT_BPWR_CALIB_ID_NONE = 0x00, + ANT_BPWR_CALIB_ID_MANUAL = 0xAA, ///< Calibration Request: Manual Zero. + ANT_BPWR_CALIB_ID_AUTO = 0xAB, ///< Calibration Request: Auto Zero Configuration. + ANT_BPWR_CALIB_ID_MANUAL_SUCCESS = 0xAC, ///< Calibration Response: Manual Zero Successful. + ANT_BPWR_CALIB_ID_FAILED = 0xAF, ///< Calibration Response: Failed. + ANT_BPWR_CALIB_ID_CTF = 0x10, ///< Crank Torque Frequency (CTF) Power sensor Defined Message. + ANT_BPWR_CALIB_ID_AUTO_SUPPORT = 0x12, ///< Auto Zero Support. + ANT_BPWR_CALIB_ID_CUSTOM_REQ = 0xBA, ///< Custom Calibration Parameter Request. + ANT_BPWR_CALIB_ID_CUSTOM_REQ_SUCCESS = 0xBB, ///< Custom Calibration Parameter Response. + ANT_BPWR_CALIB_ID_CUSTOM_UPDATE = 0xBC, ///< Custom Calibration Parameter Update. + ANT_BPWR_CALIB_ID_CUSTOM_UPDATE_SUCCESS = 0xBD, ///< Custom Calibration Parameter Update Response. +} ant_bpwr_calib_id_t; + +/**@brief BPWR Calibration Auto Zero Status. + */ +typedef enum +{ + ANT_BPWR_AUTO_ZERO_NOT_SUPPORTED = 0xFF, ///< Auto Zero Not Supported. + ANT_BPWR_AUTO_ZERO_OFF = 0x00, ///< Auto Zero OFF. + ANT_BPWR_AUTO_ZERO_ON = 0x01, ///< Auto Zero ON. +} ant_bpwr_auto_zero_status_t; + +/**@brief Data structure for Bicycle Power data page 1. + */ +typedef struct +{ + ant_bpwr_calib_id_t calibration_id; ///< Calibration request type. + ant_bpwr_auto_zero_status_t auto_zero_status; ///< Status of automatic zero feature of power sensor. + union + { + int16_t general_calib; + uint8_t custom_calib[6]; + } data; +} ant_bpwr_page1_data_t; + +/**@brief Initialize page 1. + */ +#define DEFAULT_ANT_BPWR_PAGE1() \ + (ant_bpwr_page1_data_t) \ + { \ + .calibration_id = ANT_BPWR_CALIB_ID_NONE, \ + .auto_zero_status = ANT_BPWR_AUTO_ZERO_NOT_SUPPORTED, \ + .data.general_calib = 0x00, \ + } + +/**@brief Initialize page 1 with the general request. + */ +#define ANT_BPWR_GENERAL_CALIB_REQUEST() \ + (ant_bpwr_page1_data_t) \ + { \ + .calibration_id = ANT_BPWR_CALIB_ID_MANUAL, \ + } + +/**@brief Function for encoding page 1. + * + * @param[in] p_page_data Pointer to the page data. + * @param[out] p_page_buffer Pointer to the data buffer. + */ +void ant_bpwr_page_1_encode(uint8_t * p_page_buffer, + ant_bpwr_page1_data_t const * p_page_data); + +/**@brief Function for decoding page 1. + * + * @param[in] p_page_buffer Pointer to the data buffer. + * @param[out] p_page_data Pointer to the page data. + */ +void ant_bpwr_page_1_decode(uint8_t const * p_page_buffer, + ant_bpwr_page1_data_t * p_page_data); + + + +#ifdef __cplusplus +} +#endif + +#endif // ANT_BPWR_PAGE_1_H__ +/** @} */ -- cgit v1.2.3