From 3061ecca3d0fdfb87dabbf5f63c9e06c2a30f53a Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Thu, 23 Aug 2018 17:08:59 +0200 Subject: o Initial import. --- .../softdevice/s132/headers/nrf52/nrf_mbr.h | 241 +++++++++++++++++++++ 1 file changed, 241 insertions(+) create mode 100644 thirdparty/nRF5_SDK_15.0.0_a53641a/components/softdevice/s132/headers/nrf52/nrf_mbr.h (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/components/softdevice/s132/headers/nrf52/nrf_mbr.h') diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/components/softdevice/s132/headers/nrf52/nrf_mbr.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/softdevice/s132/headers/nrf52/nrf_mbr.h new file mode 100644 index 0000000..cc5971c --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/components/softdevice/s132/headers/nrf52/nrf_mbr.h @@ -0,0 +1,241 @@ +/* + * Copyright (c) 2014 - 2017, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + @defgroup nrf_mbr_api Master Boot Record API + @{ + + @brief APIs for updating SoftDevice and BootLoader + +*/ + +#ifndef NRF_MBR_H__ +#define NRF_MBR_H__ + +#include "nrf_svc.h" +#include + +#ifdef __cplusplus +extern "C" { +#endif + +/** @addtogroup NRF_MBR_DEFINES Defines + * @{ */ + +/**@brief MBR SVC Base number. */ +#define MBR_SVC_BASE (0x18) + +/**@brief Page size in words. */ +#define MBR_PAGE_SIZE_IN_WORDS (1024) + +/** @brief The size that must be reserved for the MBR when a SoftDevice is written to flash. +This is the offset where the first byte of the SoftDevice hex file is written.*/ +#define MBR_SIZE (0x1000) + +/** @} */ + +/** @addtogroup NRF_MBR_ENUMS Enumerations + * @{ */ + +/**@brief nRF Master Boot Record API SVC numbers. */ +enum NRF_MBR_SVCS +{ + SD_MBR_COMMAND = MBR_SVC_BASE, /**< ::sd_mbr_command */ +}; + +/**@brief Possible values for ::sd_mbr_command_t.command */ +enum NRF_MBR_COMMANDS +{ + SD_MBR_COMMAND_COPY_BL, /**< Copy a new BootLoader. @see ::sd_mbr_command_copy_bl_t*/ + SD_MBR_COMMAND_COPY_SD, /**< Copy a new SoftDevice. @see ::sd_mbr_command_copy_sd_t*/ + SD_MBR_COMMAND_INIT_SD, /**< Initialize forwarding interrupts to SD, and run reset function in SD. Does not require any parameters in ::sd_mbr_command_t params.*/ + SD_MBR_COMMAND_COMPARE, /**< This command works like memcmp. @see ::sd_mbr_command_compare_t*/ + SD_MBR_COMMAND_VECTOR_TABLE_BASE_SET, /**< Change the address the MBR starts after a reset. @see ::sd_mbr_command_vector_table_base_set_t*/ + SD_MBR_COMMAND_RESERVED, + SD_MBR_COMMAND_IRQ_FORWARD_ADDRESS_SET, /**< Start forwarding all interrupts to this address. @see ::sd_mbr_command_irq_forward_address_set_t*/ +}; + +/** @} */ + +/** @addtogroup NRF_MBR_TYPES Types + * @{ */ + +/**@brief This command copies part of a new SoftDevice + * + * The destination area is erased before copying. + * If dst is in the middle of a flash page, that whole flash page will be erased. + * If (dst+len) is in the middle of a flash page, that whole flash page will be erased. + * + * The user of this function is responsible for setting the BPROT registers. + * + * @retval ::NRF_SUCCESS indicates that the contents of the memory blocks where copied correctly. + * @retval ::NRF_ERROR_INTERNAL indicates that the contents of the memory blocks where not verified correctly after copying. + */ +typedef struct +{ + uint32_t *src; /**< Pointer to the source of data to be copied.*/ + uint32_t *dst; /**< Pointer to the destination where the content is to be copied.*/ + uint32_t len; /**< Number of 32 bit words to copy. Must be a multiple of @ref MBR_PAGE_SIZE_IN_WORDS words.*/ +} sd_mbr_command_copy_sd_t; + + +/**@brief This command works like memcmp, but takes the length in words. + * + * @retval ::NRF_SUCCESS indicates that the contents of both memory blocks are equal. + * @retval ::NRF_ERROR_NULL indicates that the contents of the memory blocks are not equal. + */ +typedef struct +{ + uint32_t *ptr1; /**< Pointer to block of memory. */ + uint32_t *ptr2; /**< Pointer to block of memory. */ + uint32_t len; /**< Number of 32 bit words to compare.*/ +} sd_mbr_command_compare_t; + + +/**@brief This command copies a new BootLoader. + * + * With this command, destination of BootLoader is always the address written in + * NRF_UICR->BOOTADDR. + * + * Destination is erased by this function. + * If (destination+bl_len) is in the middle of a flash page, that whole flash page will be erased. + * + * This function will use PROTENSET to protect the flash that is not intended to be written. + * + * On success, this function will not return. It will start the new BootLoader from reset-vector as normal. + * + * @retval ::NRF_ERROR_INTERNAL indicates an internal error that should not happen. + * @retval ::NRF_ERROR_FORBIDDEN if NRF_UICR->BOOTADDR is not set. + * @retval ::NRF_ERROR_INVALID_LENGTH if parameters attempts to read or write outside flash area. + * @retval ::NRF_ERROR_NO_MEM if no parameter page is provided (see SoftDevice Specification for more info) + */ +typedef struct +{ + uint32_t *bl_src; /**< Pointer to the source of the Bootloader to be be copied.*/ + uint32_t bl_len; /**< Number of 32 bit words to copy for BootLoader. */ +} sd_mbr_command_copy_bl_t; + +/**@brief Change the address the MBR starts after a reset + * + * Once this function has been called, this address is where the MBR will start to forward + * interrupts to after a reset. + * + * To restore default forwarding this function should be called with @ref address set to 0. The + * MBR will then start forwarding interrupts to the address in NFR_UICR->BOOTADDR or to the + * SoftDevice if the BOOTADDR is not set. + * + * On success, this function will not return. It will reset the device. + * + * @retval ::NRF_ERROR_INTERNAL indicates an internal error that should not happen. + * @retval ::NRF_ERROR_INVALID_ADDR if parameter address is outside of the flash size. + * @retval ::NRF_ERROR_NO_MEM if no parameter page is provided (see SoftDevice Specification for more info) + */ +typedef struct +{ + uint32_t address; /**< The base address of the interrupt vector table for forwarded interrupts.*/ +} sd_mbr_command_vector_table_base_set_t; + +/**@brief Sets the base address of the interrupt vector table for interrupts forwarded from the MBR + * + * Unlike sd_mbr_command_vector_table_base_set_t, this function does not reset, and it does not + * change where the MBR starts after reset. + * + * @retval ::NRF_SUCCESS + */ +typedef struct +{ + uint32_t address; /**< The base address of the interrupt vector table for forwarded interrupts.*/ +} sd_mbr_command_irq_forward_address_set_t; + +/**@brief Input structure containing data used when calling ::sd_mbr_command + * + * Depending on what command value that is set, the corresponding params value type must also be + * set. See @ref NRF_MBR_COMMANDS for command types and corresponding params value type. If command + * @ref SD_MBR_COMMAND_INIT_SD is set, it is not necessary to set any values under params. + */ +typedef struct +{ + uint32_t command; /**< Type of command to be issued. See @ref NRF_MBR_COMMANDS. */ + union + { + sd_mbr_command_copy_sd_t copy_sd; /**< Parameters for copy SoftDevice.*/ + sd_mbr_command_compare_t compare; /**< Parameters for verify.*/ + sd_mbr_command_copy_bl_t copy_bl; /**< Parameters for copy BootLoader. Requires parameter page. */ + sd_mbr_command_vector_table_base_set_t base_set; /**< Parameters for vector table base set. Requires parameter page.*/ + sd_mbr_command_irq_forward_address_set_t irq_forward_address_set; /**< Parameters for irq forward address set*/ + } params; /**< Command parameters. */ +} sd_mbr_command_t; + +/** @} */ + +/** @addtogroup NRF_MBR_FUNCTIONS Functions + * @{ */ + +/**@brief Issue Master Boot Record commands + * + * Commands used when updating a SoftDevice and bootloader. + * + * The @ref SD_MBR_COMMAND_COPY_BL and @ref SD_MBR_COMMAND_VECTOR_TABLE_BASE_SET requires + * parameters to be retained by the MBR when resetting the IC. This is done in a separate flash + * page provided by the application. The UICR register UICR.NRFFW[1] must be set to an address + * corresponding to a page in the application flash space. This page will be cleared by the MBR and + * used to store the command before reset. When the UICR.NRFFW[1] field is set the page it refers + * to must not be used by the application. If the UICR.NRFFW[1] is set to 0xFFFFFFFF (the default) + * MBR commands which use flash will be unavailable and return @ref NRF_ERROR_NO_MEM. + * + * @param[in] param Pointer to a struct describing the command. + * + * @note For return values, see ::sd_mbr_command_copy_sd_t, ::sd_mbr_command_copy_bl_t, + * ::sd_mbr_command_compare_t, ::sd_mbr_command_vector_table_base_set_t, + * ::sd_mbr_command_irq_forward_address_set_t + * + * @retval ::NRF_ERROR_NO_MEM if UICR.NRFFW[1] is not set (i.e. is 0xFFFFFFFF). + * @retval ::NRF_ERROR_INVALID_PARAM if an invalid command is given. +*/ +SVCALL(SD_MBR_COMMAND, uint32_t, sd_mbr_command(sd_mbr_command_t* param)); + +/** @} */ + +#ifdef __cplusplus +} +#endif +#endif // NRF_MBR_H__ + +/** + @} +*/ -- cgit v1.2.3