From 3061ecca3d0fdfb87dabbf5f63c9e06c2a30f53a Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Thu, 23 Aug 2018 17:08:59 +0200 Subject: o Initial import. --- .../examples/ble_peripheral/ble_app_rscs/main.c | 1040 ++++++++++++++++++++ 1 file changed, 1040 insertions(+) create mode 100644 thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ble_peripheral/ble_app_rscs/main.c (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ble_peripheral/ble_app_rscs/main.c') diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ble_peripheral/ble_app_rscs/main.c b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ble_peripheral/ble_app_rscs/main.c new file mode 100644 index 0000000..82ec4da --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/ble_peripheral/ble_app_rscs/main.c @@ -0,0 +1,1040 @@ +/** + * Copyright (c) 2012 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +/** @file + * + * @defgroup ble_sdk_app_rsc_main main.c + * @{ + * @ingroup ble_sdk_app_rsc + * @brief Running Speed and Cadence Service Sample Application main file. + * + * This file contains the source code for a sample application using the Running Speed and Cadence service. + * It also includes the sample code for Battery and Device Information services. + * This application uses the @ref srvlib_conn_params module. + */ +#include +#include +#include "nordic_common.h" +#include "nrf.h" +#include "app_error.h" +#include "ble.h" +#include "ble_err.h" +#include "ble_hci.h" +#include "ble_srv_common.h" +#include "ble_advdata.h" +#include "ble_advertising.h" +#include "ble_bas.h" +#include "ble_rscs.h" +#include "ble_dis.h" +#include "ble_conn_params.h" +#include "sensorsim.h" +#include "nrf_sdh.h" +#include "nrf_sdh_soc.h" +#include "nrf_sdh_ble.h" +#include "app_timer.h" +#include "peer_manager.h" +#include "bsp_btn_ble.h" +#include "fds.h" +#include "ble_conn_state.h" +#include "nrf_ble_gatt.h" +#include "nrf_ble_qwr.h" +#include "nrf_pwr_mgmt.h" + +#include "nrf_log.h" +#include "nrf_log_ctrl.h" +#include "nrf_log_default_backends.h" + + +#define DEVICE_NAME "Nordic_RSC" /**< Name of device. Will be included in the advertising data. */ +#define APP_ADV_INTERVAL 40 /**< The advertising interval (in units of 0.625 ms. This value corresponds to 25 ms). */ + +#define APP_ADV_DURATION 18000 /**< The advertising duration (180 seconds) in units of 10 milliseconds. */ + +#define APP_BLE_OBSERVER_PRIO 3 /**< Application's BLE observer priority. You shouldn't need to modify this value. */ +#define APP_BLE_CONN_CFG_TAG 1 /**< A tag identifying the SoftDevice BLE configuration. */ + +#define BATTERY_LEVEL_MEAS_INTERVAL APP_TIMER_TICKS(2000) /**< Battery level measurement interval (ticks). */ +#define MIN_BATTERY_LEVEL 81 /**< Minimum battery level as returned by the simulated measurement function. */ +#define MAX_BATTERY_LEVEL 100 /**< Maximum battery level as returned by the simulated measurement function. */ +#define BATTERY_LEVEL_INCREMENT 1 /**< Value by which the battery level is incremented/decremented for each call to the simulated measurement function. */ + +#define SPEED_AND_CADENCE_MEAS_INTERVAL 1000 /**< Speed and cadence measurement interval (milliseconds). */ + +#define MIN_SPEED_MPS 0.5 /**< Minimum speed in meters per second for use in the simulated measurement function. */ +#define MAX_SPEED_MPS 6.5 /**< Maximum speed in meters per second for use in the simulated measurement function. */ +#define SPEED_MPS_INCREMENT 1.5 /**< Value by which speed is incremented/decremented for each call to the simulated measurement function. */ +#define MIN_RUNNING_SPEED 3 /**< speed threshold to set the running bit. */ + +#define MIN_CADENCE_RPM 40 /**< Minimum cadence in revolutions per minute for use in the simulated measurement function. */ +#define MAX_CADENCE_RPM 160 /**< Maximum cadence in revolutions per minute for use in the simulated measurement function. */ +#define CADENCE_RPM_INCREMENT 20 /**< Value by which cadence is incremented/decremented in the simulated measurement function. */ + +#define MIN_STRIDE_LENGTH 20 /**< Minimum stride length in decimeter for use in the simulated measurement function. */ +#define MAX_STRIDE_LENGTH 125 /**< Maximum stride length in decimeter for use in the simulated measurement function. */ +#define STRIDE_LENGTH_INCREMENT 5 /**< Value by which stride length is incremented/decremented in the simulated measurement function. */ + +#define MIN_CONN_INTERVAL MSEC_TO_UNITS(500, UNIT_1_25_MS) /**< Minimum acceptable connection interval (0.5 seconds). */ +#define MAX_CONN_INTERVAL MSEC_TO_UNITS(1000, UNIT_1_25_MS) /**< Maximum acceptable connection interval (1 second). */ +#define SLAVE_LATENCY 0 /**< Slave latency. */ +#define CONN_SUP_TIMEOUT MSEC_TO_UNITS(4000, UNIT_10_MS) /**< Connection supervisory timeout (4 seconds). */ + +#define FIRST_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(5000) /**< Time from initiating event (connect or start of notification) to first time sd_ble_gap_conn_param_update is called (5 seconds). */ +#define NEXT_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(30000) /**< Time between each call to sd_ble_gap_conn_param_update after the first call (30 seconds). */ +#define MAX_CONN_PARAMS_UPDATE_COUNT 3 /**< Number of attempts before giving up the connection parameter negotiation. */ + +#define SEC_PARAM_BOND 1 /**< Perform bonding. */ +#define SEC_PARAM_MITM 0 /**< Man In The Middle protection not required. */ +#define SEC_PARAM_LESC 0 /**< LE Secure Connections not enabled. */ +#define SEC_PARAM_KEYPRESS 0 /**< Keypress notifications not enabled. */ +#define SEC_PARAM_IO_CAPABILITIES BLE_GAP_IO_CAPS_NONE /**< No I/O capabilities. */ +#define SEC_PARAM_OOB 0 /**< Out Of Band data not available. */ +#define SEC_PARAM_MIN_KEY_SIZE 7 /**< Minimum encryption key size. */ +#define SEC_PARAM_MAX_KEY_SIZE 16 /**< Maximum encryption key size. */ + +#define DEAD_BEEF 0xDEADBEEF /**< Value used as error code on stack dump, can be used to identify stack location on stack unwind. */ + +#define APP_FEATURE_NOT_SUPPORTED BLE_GATT_STATUS_ATTERR_APP_BEGIN + 2 /**< Reply when unsupported features are requested. */ + +/** + * @defgroup ble_dis_config Configuration for Device Information Service. + * @brief Example characteristic values used for Device Information Service. Will be passed to Device Information Service. + * @{ + */ +#define BLE_DIS_MANUFACTURER_NAME "NordicSemiconductor" /**< Manufacturer Name String. */ +#define BLE_DIS_MODEL_NUMBER "NRF5X" /**< Model Number String. */ +#define BLE_DIS_SERIAL_NUMBER "T0139836" /**< Serial Number String. */ +#define BLE_DIS_HW_REVISION "2016.42" /**< Hardware Revision String. */ +#define BLE_DIS_FW_REVISION "0.1.2" /**< Firmware Revision String. */ +#define BLE_DIS_SW_REVISION "1.2.3" /**< Software Revision String. */ +#define BLE_DIS_MANUFACTURER_ID 0x0000000059 /**< Manufacturer ID for System ID. */ +#define BLE_DIS_OU_ID 0x123456 /**< Organizationally unique ID for System ID. */ +#define BLE_DIS_CERT_LIST {0x00, 0x01, 0x02, 0x03} /**< IEEE 11073-20601 Regulatory Certification Data List. */ +#define BLE_DIS_VENDOR_ID 0x0059 /**< Vendor ID for PnP ID. */ +#define BLE_DIS_PRODUCT_ID 0x0001 /**< Product ID for PnP ID. */ +#define BLE_DIS_PRODUCT_VERSION 0x0002 /**< Product Version for PnP ID. */ +/** @} */ + +APP_TIMER_DEF(m_battery_timer_id); /**< Battery timer. */ +APP_TIMER_DEF(m_rsc_meas_timer_id); /**< RSC measurement timer. */ +BLE_BAS_DEF(m_bas); /**< Structure used to identify the battery service. */ +BLE_RSCS_DEF(m_rscs); /**< Structure used to identify the running speed and cadence service. */ +NRF_BLE_GATT_DEF(m_gatt); /**< GATT module instance. */ +BLE_ADVERTISING_DEF(m_advertising); /**< Advertising module instance. */ +NRF_BLE_QWR_DEF(m_qwr); /**< Context for the Queued Write module.*/ + +static uint16_t m_conn_handle = BLE_CONN_HANDLE_INVALID; /**< Handle of the current connection. */ + +static sensorsim_cfg_t m_battery_sim_cfg; /**< Battery Level sensor simulator configuration. */ +static sensorsim_state_t m_battery_sim_state; /**< Battery Level sensor simulator state. */ + +static sensorsim_cfg_t m_speed_mps_sim_cfg; /**< Speed simulator configuration. */ +static sensorsim_state_t m_speed_mps_sim_state; /**< Speed simulator state. */ +static sensorsim_cfg_t m_cadence_rpm_sim_cfg; /**< Cadence simulator configuration. */ +static sensorsim_state_t m_cadence_rpm_sim_state; /**< Cadence simulator state. */ +static sensorsim_cfg_t m_cadence_stl_sim_cfg; /**< stride length simulator configuration. */ +static sensorsim_state_t m_cadence_stl_sim_state; /**< stride length simulator state. */ + +static ble_uuid_t m_adv_uuids[] = /**< Universally unique service identifiers. */ +{ + {BLE_UUID_RUNNING_SPEED_AND_CADENCE, BLE_UUID_TYPE_BLE}, + {BLE_UUID_BATTERY_SERVICE, BLE_UUID_TYPE_BLE}, + {BLE_UUID_DEVICE_INFORMATION_SERVICE, BLE_UUID_TYPE_BLE} +}; + + +static void advertising_start(bool erase_bonds); + + +/**@brief Callback function for asserts in the SoftDevice. + * + * @details This function will be called in case of an assert in the SoftDevice. + * + * @warning This handler is an example only and does not fit a final product. You need to analyze + * how your product is supposed to react in case of Assert. + * @warning On assert from the SoftDevice, the system can only recover on reset. + * + * @param[in] line_num Line number of the failing ASSERT call. + * @param[in] file_name File name of the failing ASSERT call. + */ +void assert_nrf_callback(uint16_t line_num, const uint8_t * p_file_name) +{ + app_error_handler(DEAD_BEEF, line_num, p_file_name); +} + + +/**@brief Function for handling Peer Manager events. + * + * @param[in] p_evt Peer Manager event. + */ +static void pm_evt_handler(pm_evt_t const * p_evt) +{ + ret_code_t err_code; + + switch (p_evt->evt_id) + { + case PM_EVT_BONDED_PEER_CONNECTED: + { + NRF_LOG_INFO("Connected to a previously bonded device."); + } break; + + case PM_EVT_CONN_SEC_SUCCEEDED: + { + NRF_LOG_INFO("Connection secured: role: %d, conn_handle: 0x%x, procedure: %d.", + ble_conn_state_role(p_evt->conn_handle), + p_evt->conn_handle, + p_evt->params.conn_sec_succeeded.procedure); + } break; + + case PM_EVT_CONN_SEC_FAILED: + { + /* Often, when securing fails, it shouldn't be restarted, for security reasons. + * Other times, it can be restarted directly. + * Sometimes it can be restarted, but only after changing some Security Parameters. + * Sometimes, it cannot be restarted until the link is disconnected and reconnected. + * Sometimes it is impossible, to secure the link, or the peer device does not support it. + * How to handle this error is highly application dependent. */ + } break; + + case PM_EVT_CONN_SEC_CONFIG_REQ: + { + // Reject pairing request from an already bonded peer. + pm_conn_sec_config_t conn_sec_config = {.allow_repairing = false}; + pm_conn_sec_config_reply(p_evt->conn_handle, &conn_sec_config); + } break; + + case PM_EVT_CONN_SEC_PARAMS_REQ: + { + ble_gap_sec_params_t sec_param; + + memset(&sec_param, 0, sizeof(ble_gap_sec_params_t)); + + sec_param.bond = SEC_PARAM_BOND; + sec_param.mitm = SEC_PARAM_MITM; + sec_param.lesc = SEC_PARAM_LESC; + sec_param.keypress = SEC_PARAM_KEYPRESS; + sec_param.io_caps = SEC_PARAM_IO_CAPABILITIES; + sec_param.oob = SEC_PARAM_OOB; + sec_param.min_key_size = SEC_PARAM_MIN_KEY_SIZE; + sec_param.max_key_size = SEC_PARAM_MAX_KEY_SIZE; + sec_param.kdist_own.enc = 1; + sec_param.kdist_own.id = 1; + sec_param.kdist_peer.enc = 1; + sec_param.kdist_peer.id = 1; + + err_code = pm_conn_sec_params_reply(p_evt->conn_handle, + &sec_param, + p_evt->params.conn_sec_params_req.p_context); + APP_ERROR_CHECK(err_code); + } break; + + case PM_EVT_STORAGE_FULL: + { + // Run garbage collection on the flash. + err_code = fds_gc(); + if (err_code == FDS_ERR_NO_SPACE_IN_QUEUES) + { + // Retry. + } + else + { + APP_ERROR_CHECK(err_code); + } + } break; + + case PM_EVT_PEERS_DELETE_SUCCEEDED: + { + advertising_start(false); + } break; + case PM_EVT_PEER_DATA_UPDATE_FAILED: + { + // Assert. + APP_ERROR_CHECK(p_evt->params.peer_data_update_failed.error); + } break; + + case PM_EVT_PEER_DELETE_FAILED: + { + // Assert. + APP_ERROR_CHECK(p_evt->params.peer_delete_failed.error); + } break; + + case PM_EVT_PEERS_DELETE_FAILED: + { + // Assert. + APP_ERROR_CHECK(p_evt->params.peers_delete_failed_evt.error); + } break; + + case PM_EVT_ERROR_UNEXPECTED: + { + // Assert. + APP_ERROR_CHECK(p_evt->params.error_unexpected.error); + } break; + + case PM_EVT_CONN_SEC_START: + case PM_EVT_PEER_DATA_UPDATE_SUCCEEDED: + case PM_EVT_PEER_DELETE_SUCCEEDED: + case PM_EVT_LOCAL_DB_CACHE_APPLIED: + case PM_EVT_LOCAL_DB_CACHE_APPLY_FAILED: + // This can happen when the local DB has changed. + case PM_EVT_SERVICE_CHANGED_IND_SENT: + case PM_EVT_SERVICE_CHANGED_IND_CONFIRMED: + default: + break; + } +} + + + +/**@brief Function for performing battery measurement and updating the Battery Level characteristic + * in Battery Service. + */ +static void battery_level_update(void) +{ + ret_code_t err_code; + uint8_t battery_level; + + battery_level = (uint8_t)sensorsim_measure(&m_battery_sim_state, &m_battery_sim_cfg); + + err_code = ble_bas_battery_level_update(&m_bas, battery_level, BLE_CONN_HANDLE_ALL); + if ((err_code != NRF_SUCCESS) && + (err_code != NRF_ERROR_INVALID_STATE) && + (err_code != NRF_ERROR_RESOURCES) && + (err_code != NRF_ERROR_BUSY) && + (err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING) + ) + { + APP_ERROR_HANDLER(err_code); + } +} + + +/**@brief Function for handling the Battery measurement timer timeout. + * + * @details This function will be called each time the battery level measurement timer expires. + * + * @param[in] p_context Pointer used for passing some arbitrary information (context) from the + * app_start_timer() call to the timeout handler. + */ +static void battery_level_meas_timeout_handler(void * p_context) +{ + UNUSED_PARAMETER(p_context); + battery_level_update(); +} + + +/**@brief Function for populating simulated running speed and cadence measurement. + */ +static void rsc_sim_measurement(ble_rscs_meas_t * p_measurement) +{ + p_measurement->is_inst_stride_len_present = true; + p_measurement->is_total_distance_present = false; + p_measurement->is_running = false; + + p_measurement->inst_speed = sensorsim_measure(&m_speed_mps_sim_state, + &m_speed_mps_sim_cfg); + + p_measurement->inst_cadence = sensorsim_measure(&m_cadence_rpm_sim_state, + &m_cadence_rpm_sim_cfg); + + p_measurement->inst_stride_length = sensorsim_measure(&m_cadence_stl_sim_state, + &m_cadence_stl_sim_cfg); + + if (p_measurement->inst_speed > (uint32_t)(MIN_RUNNING_SPEED * 256)) + { + p_measurement->is_running = true; + } +} + + +/**@brief Function for handling the Running Speed and Cadence measurement timer timeout. + * + * @details This function will be called each time the running speed and cadence + * measurement timer expires. + * + * @param[in] p_context Pointer used for passing some arbitrary information (context) from the + * app_start_timer() call to the timeout handler. + */ +static void rsc_meas_timeout_handler(void * p_context) +{ + ret_code_t err_code; + ble_rscs_meas_t rscs_measurement; + + UNUSED_PARAMETER(p_context); + + rsc_sim_measurement(&rscs_measurement); + + err_code = ble_rscs_measurement_send(&m_rscs, &rscs_measurement); + if ((err_code != NRF_SUCCESS) && + (err_code != NRF_ERROR_INVALID_STATE) && + (err_code != NRF_ERROR_RESOURCES) && + (err_code != NRF_ERROR_BUSY) && + (err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING) + ) + { + APP_ERROR_HANDLER(err_code); + } +} + + +/**@brief Function for the Timer initialization. + * + * @details Initializes the timer module. This creates and starts application timers. + */ +static void timers_init(void) +{ + ret_code_t err_code; + + // Initialize timer module. + err_code = app_timer_init(); + APP_ERROR_CHECK(err_code); + + // Create timers. + err_code = app_timer_create(&m_battery_timer_id, + APP_TIMER_MODE_REPEATED, + battery_level_meas_timeout_handler); + APP_ERROR_CHECK(err_code); + + // Create battery timer. + err_code = app_timer_create(&m_rsc_meas_timer_id, + APP_TIMER_MODE_REPEATED, + rsc_meas_timeout_handler); + APP_ERROR_CHECK(err_code); +} + + +/**@brief Function for the GAP initialization. + * + * @details This function sets up all the necessary GAP (Generic Access Profile) parameters of the + * device including the device name, appearance, and the preferred connection parameters. + */ +static void gap_params_init(void) +{ + ret_code_t err_code; + ble_gap_conn_params_t gap_conn_params; + ble_gap_conn_sec_mode_t sec_mode; + + BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode); + + err_code = sd_ble_gap_device_name_set(&sec_mode, + (const uint8_t *)DEVICE_NAME, + strlen(DEVICE_NAME)); + APP_ERROR_CHECK(err_code); + + err_code = sd_ble_gap_appearance_set(BLE_APPEARANCE_GENERIC_RUNNING_WALKING_SENSOR); + APP_ERROR_CHECK(err_code); + + memset(&gap_conn_params, 0, sizeof(gap_conn_params)); + + gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL; + gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL; + gap_conn_params.slave_latency = SLAVE_LATENCY; + gap_conn_params.conn_sup_timeout = CONN_SUP_TIMEOUT; + + err_code = sd_ble_gap_ppcp_set(&gap_conn_params); + APP_ERROR_CHECK(err_code); +} + + +/**@brief Function for initializing the GATT module. + */ +static void gatt_init(void) +{ + ret_code_t err_code = nrf_ble_gatt_init(&m_gatt, NULL); + APP_ERROR_CHECK(err_code); +} + + +/**@brief Function for handling Queued Write Module errors. + * + * @details A pointer to this function will be passed to each service which may need to inform the + * application about an error. + * + * @param[in] nrf_error Error code containing information about what went wrong. + */ +static void nrf_qwr_error_handler(uint32_t nrf_error) +{ + APP_ERROR_HANDLER(nrf_error); +} + + +/**@brief Function for initializing services that will be used by the application. + * + * @details Initialize the Running Speed and Cadence, Battery and Device Information services. + */ +static void services_init(void) +{ + ret_code_t err_code; + ble_rscs_init_t rscs_init; + ble_bas_init_t bas_init; + ble_dis_init_t dis_init; + nrf_ble_qwr_init_t qwr_init = {0}; + + // Initialize Queued Write Module + qwr_init.error_handler = nrf_qwr_error_handler; + err_code = nrf_ble_qwr_init(&m_qwr, &qwr_init); + APP_ERROR_CHECK(err_code); + + // Initialize Running Speed and Cadence Service + memset(&rscs_init, 0, sizeof(rscs_init)); + + rscs_init.evt_handler = NULL; + rscs_init.feature = BLE_RSCS_FEATURE_INSTANT_STRIDE_LEN_BIT | + BLE_RSCS_FEATURE_WALKING_OR_RUNNING_STATUS_BIT; + + rscs_init.initial_rcm.is_inst_stride_len_present = true; + rscs_init.initial_rcm.is_total_distance_present = false; + rscs_init.initial_rcm.is_running = false; + rscs_init.initial_rcm.inst_stride_length = 0; + + // Here the sec level for the Running Speed and Cadence Service can be changed/increased. + BLE_GAP_CONN_SEC_MODE_SET_OPEN(&rscs_init.rsc_meas_attr_md.cccd_write_perm); + BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&rscs_init.rsc_meas_attr_md.read_perm); + BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&rscs_init.rsc_meas_attr_md.write_perm); + + BLE_GAP_CONN_SEC_MODE_SET_OPEN(&rscs_init.rsc_feature_attr_md.read_perm); + BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&rscs_init.rsc_feature_attr_md.write_perm); + + err_code = ble_rscs_init(&m_rscs, &rscs_init); + APP_ERROR_CHECK(err_code); + + // Initialize Battery Service. + memset(&bas_init, 0, sizeof(bas_init)); + + // Here the sec level for the Battery Service can be changed/increased. + BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_char_attr_md.cccd_write_perm); + BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_char_attr_md.read_perm); + BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&bas_init.battery_level_char_attr_md.write_perm); + + BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_report_read_perm); + + bas_init.evt_handler = NULL; + bas_init.support_notification = true; + bas_init.p_report_ref = NULL; + bas_init.initial_batt_level = 100; + + err_code = ble_bas_init(&m_bas, &bas_init); + APP_ERROR_CHECK(err_code); + + // Initialize Device Information Service. + ble_dis_sys_id_t sys_id; + ble_dis_pnp_id_t pnp_id; + ble_dis_reg_cert_data_list_t cert_list; + uint8_t cert_list_data[] = BLE_DIS_CERT_LIST; + + memset(&dis_init, 0, sizeof(dis_init)); + + ble_srv_ascii_to_utf8(&dis_init.manufact_name_str, BLE_DIS_MANUFACTURER_NAME); + ble_srv_ascii_to_utf8(&dis_init.model_num_str, BLE_DIS_MODEL_NUMBER); + ble_srv_ascii_to_utf8(&dis_init.serial_num_str, BLE_DIS_SERIAL_NUMBER); + ble_srv_ascii_to_utf8(&dis_init.hw_rev_str, BLE_DIS_HW_REVISION); + ble_srv_ascii_to_utf8(&dis_init.fw_rev_str, BLE_DIS_FW_REVISION); + ble_srv_ascii_to_utf8(&dis_init.sw_rev_str, BLE_DIS_SW_REVISION); + + sys_id.manufacturer_id = BLE_DIS_MANUFACTURER_ID; + sys_id.organizationally_unique_id = BLE_DIS_OU_ID; + + cert_list.p_list = cert_list_data; + cert_list.list_len = sizeof(cert_list_data); + + pnp_id.vendor_id_source = BLE_DIS_VENDOR_ID_SRC_BLUETOOTH_SIG; + pnp_id.vendor_id = BLE_DIS_VENDOR_ID; + pnp_id.product_id = BLE_DIS_PRODUCT_ID; + pnp_id.product_version = BLE_DIS_PRODUCT_VERSION; + + dis_init.p_sys_id = &sys_id; + dis_init.p_reg_cert_data_list = &cert_list; + dis_init.p_pnp_id = &pnp_id; + + BLE_GAP_CONN_SEC_MODE_SET_OPEN(&dis_init.dis_attr_md.read_perm); + BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&dis_init.dis_attr_md.write_perm); + + err_code = ble_dis_init(&dis_init); + APP_ERROR_CHECK(err_code); +} + + +/**@brief Function for initializing the sensor simulators. + */ +static void sensor_simulator_init(void) +{ + m_battery_sim_cfg.min = MIN_BATTERY_LEVEL; + m_battery_sim_cfg.max = MAX_BATTERY_LEVEL; + m_battery_sim_cfg.incr = BATTERY_LEVEL_INCREMENT; + m_battery_sim_cfg.start_at_max = true; + + sensorsim_init(&m_battery_sim_state, &m_battery_sim_cfg); + + // speed is in units of meters per second divided by 256 + m_speed_mps_sim_cfg.min = (uint32_t)(MIN_SPEED_MPS * 256); + m_speed_mps_sim_cfg.max = (uint32_t)(MAX_SPEED_MPS * 256); + m_speed_mps_sim_cfg.incr = (uint32_t)(SPEED_MPS_INCREMENT * 256); + m_speed_mps_sim_cfg.start_at_max = false; + + sensorsim_init(&m_speed_mps_sim_state, &m_speed_mps_sim_cfg); + + m_cadence_rpm_sim_cfg.min = MIN_CADENCE_RPM; + m_cadence_rpm_sim_cfg.max = MAX_CADENCE_RPM; + m_cadence_rpm_sim_cfg.incr = CADENCE_RPM_INCREMENT; + m_cadence_rpm_sim_cfg.start_at_max = false; + + sensorsim_init(&m_cadence_rpm_sim_state, &m_cadence_rpm_sim_cfg); + + m_cadence_stl_sim_cfg.min = MIN_STRIDE_LENGTH; + m_cadence_stl_sim_cfg.max = MAX_STRIDE_LENGTH; + m_cadence_stl_sim_cfg.incr = STRIDE_LENGTH_INCREMENT; + m_cadence_stl_sim_cfg.start_at_max = false; + + sensorsim_init(&m_cadence_stl_sim_state, &m_cadence_stl_sim_cfg); +} + + +/**@brief Function for starting application timers. + */ +static void application_timers_start(void) +{ + ret_code_t err_code; + uint32_t rsc_meas_timer_ticks; + + // Start application timers. + err_code = app_timer_start(m_battery_timer_id, BATTERY_LEVEL_MEAS_INTERVAL, NULL); + APP_ERROR_CHECK(err_code); + + rsc_meas_timer_ticks = APP_TIMER_TICKS(SPEED_AND_CADENCE_MEAS_INTERVAL); + + err_code = app_timer_start(m_rsc_meas_timer_id, rsc_meas_timer_ticks, NULL); + APP_ERROR_CHECK(err_code); +} + + +/**@brief Function for handling the Connection Parameters Module. + * + * @details This function will be called for all events in the Connection Parameters Module which + * are passed to the application. + * @note All this function does is to disconnect. This could have been done by simply + * setting the disconnect_on_fail config parameter, but instead we use the event + * handler mechanism to demonstrate its use. + * + * @param[in] p_evt Event received from the Connection Parameters Module. + */ +static void on_conn_params_evt(ble_conn_params_evt_t * p_evt) +{ + ret_code_t err_code; + + if (p_evt->evt_type == BLE_CONN_PARAMS_EVT_FAILED) + { + err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_CONN_INTERVAL_UNACCEPTABLE); + APP_ERROR_CHECK(err_code); + } +} + + +/**@brief Function for handling a Connection Parameters error. + * + * @param[in] nrf_error Error code containing information about what went wrong. + */ +static void conn_params_error_handler(uint32_t nrf_error) +{ + APP_ERROR_HANDLER(nrf_error); +} + + +/**@brief Function for initializing the Connection Parameters module. + */ +static void conn_params_init(void) +{ + ret_code_t err_code; + ble_conn_params_init_t cp_init; + + memset(&cp_init, 0, sizeof(cp_init)); + + cp_init.p_conn_params = NULL; + cp_init.first_conn_params_update_delay = FIRST_CONN_PARAMS_UPDATE_DELAY; + cp_init.next_conn_params_update_delay = NEXT_CONN_PARAMS_UPDATE_DELAY; + cp_init.max_conn_params_update_count = MAX_CONN_PARAMS_UPDATE_COUNT; + cp_init.start_on_notify_cccd_handle = m_rscs.meas_handles.cccd_handle; + cp_init.disconnect_on_fail = false; + cp_init.evt_handler = on_conn_params_evt; + cp_init.error_handler = conn_params_error_handler; + + err_code = ble_conn_params_init(&cp_init); + APP_ERROR_CHECK(err_code); +} + + +/**@brief Function for putting the chip into sleep mode. + * + * @note This function will not return. + */ +static void sleep_mode_enter(void) +{ + ret_code_t err_code; + + err_code = bsp_indication_set(BSP_INDICATE_IDLE); + APP_ERROR_CHECK(err_code); + + // Prepare wakeup buttons. + err_code = bsp_btn_ble_sleep_mode_prepare(); + APP_ERROR_CHECK(err_code); + + // Go to system-off mode (this function will not return; wakeup will cause a reset). + err_code = sd_power_system_off(); + APP_ERROR_CHECK(err_code); +} + + +/**@brief Function for handling advertising events. + * + * @details This function will be called for advertising events which are passed to the application. + * + * @param[in] ble_adv_evt Advertising event. + */ +static void on_adv_evt(ble_adv_evt_t ble_adv_evt) +{ + ret_code_t err_code; + + switch (ble_adv_evt) + { + case BLE_ADV_EVT_FAST: + NRF_LOG_INFO("Fast advertising."); + err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING); + APP_ERROR_CHECK(err_code); + break; + + case BLE_ADV_EVT_IDLE: + sleep_mode_enter(); + break; + + default: + break; + } +} + + +/**@brief Function for handling BLE events. + * + * @param[in] p_ble_evt Bluetooth stack event. + * @param[in] p_context Unused. + */ +static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context) +{ + ret_code_t err_code = NRF_SUCCESS; + + switch (p_ble_evt->header.evt_id) + { + case BLE_GAP_EVT_CONNECTED: + NRF_LOG_INFO("Connected."); + err_code = bsp_indication_set(BSP_INDICATE_CONNECTED); + APP_ERROR_CHECK(err_code); + m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle; + err_code = nrf_ble_qwr_conn_handle_assign(&m_qwr, m_conn_handle); + APP_ERROR_CHECK(err_code); + break; + + case BLE_GAP_EVT_DISCONNECTED: + NRF_LOG_INFO("Disconnected."); + m_conn_handle = BLE_CONN_HANDLE_INVALID; + break; + + case BLE_GAP_EVT_PHY_UPDATE_REQUEST: + { + NRF_LOG_DEBUG("PHY update request."); + ble_gap_phys_t const phys = + { + .rx_phys = BLE_GAP_PHY_AUTO, + .tx_phys = BLE_GAP_PHY_AUTO, + }; + err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys); + APP_ERROR_CHECK(err_code); + } break; + + case BLE_GATTC_EVT_TIMEOUT: + // Disconnect on GATT Client timeout event. + NRF_LOG_DEBUG("GATT Client Timeout."); + err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle, + BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION); + APP_ERROR_CHECK(err_code); + break; + + case BLE_GATTS_EVT_TIMEOUT: + // Disconnect on GATT Server timeout event. + NRF_LOG_DEBUG("GATT Server Timeout."); + err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle, + BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION); + APP_ERROR_CHECK(err_code); + break; + + default: + // No implementation needed. + break; + } +} + + +/**@brief Function for initializing the BLE stack. + * + * @details Initializes the SoftDevice and the BLE event interrupt. + */ +static void ble_stack_init(void) +{ + ret_code_t err_code; + + err_code = nrf_sdh_enable_request(); + APP_ERROR_CHECK(err_code); + + // Configure the BLE stack using the default settings. + // Fetch the start address of the application RAM. + uint32_t ram_start = 0; + err_code = nrf_sdh_ble_default_cfg_set(APP_BLE_CONN_CFG_TAG, &ram_start); + APP_ERROR_CHECK(err_code); + + // Enable BLE stack. + err_code = nrf_sdh_ble_enable(&ram_start); + APP_ERROR_CHECK(err_code); + + // Register a handler for BLE events. + NRF_SDH_BLE_OBSERVER(m_ble_observer, APP_BLE_OBSERVER_PRIO, ble_evt_handler, NULL); +} + + +/**@brief Function for handling events from the BSP module. + * + * @param[in] event Event generated by button press. + */ +static void bsp_event_handler(bsp_event_t event) +{ + ret_code_t err_code; + + switch (event) + { + case BSP_EVENT_SLEEP: + sleep_mode_enter(); + break; + + case BSP_EVENT_DISCONNECT: + err_code = sd_ble_gap_disconnect(m_conn_handle, + BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION); + if (err_code != NRF_ERROR_INVALID_STATE) + { + APP_ERROR_CHECK(err_code); + } + break; + + case BSP_EVENT_WHITELIST_OFF: + if (m_conn_handle == BLE_CONN_HANDLE_INVALID) + { + err_code = ble_advertising_restart_without_whitelist(&m_advertising); + if (err_code != NRF_ERROR_INVALID_STATE) + { + APP_ERROR_CHECK(err_code); + } + } + break; + + default: + break; + } +} + + +/**@brief Function for the Peer Manager initialization. + */ +static void peer_manager_init(void) +{ + ret_code_t err_code; + + err_code = pm_init(); + APP_ERROR_CHECK(err_code); + + err_code = pm_register(pm_evt_handler); + APP_ERROR_CHECK(err_code); +} + + +/**@brief Clear bond information from persistent storage. + */ +static void delete_bonds(void) +{ + ret_code_t err_code; + + NRF_LOG_INFO("Erase bonds"); + + err_code = pm_peers_delete(); + APP_ERROR_CHECK(err_code); +} + + +/**@brief Function for initializing the Advertising functionality. + */ +static void advertising_init(void) +{ + ret_code_t err_code; + ble_advertising_init_t init; + + memset(&init, 0, sizeof(init)); + + init.advdata.name_type = BLE_ADVDATA_FULL_NAME; + init.advdata.include_appearance = true; + init.advdata.flags = BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE; + init.advdata.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]); + init.advdata.uuids_complete.p_uuids = m_adv_uuids; + + init.config.ble_adv_fast_enabled = true; + init.config.ble_adv_fast_interval = APP_ADV_INTERVAL; + init.config.ble_adv_fast_timeout = APP_ADV_DURATION; + + init.config.ble_adv_primary_phy = BLE_GAP_PHY_1MBPS; + init.config.ble_adv_secondary_phy = BLE_GAP_PHY_2MBPS; + init.config.ble_adv_extended_enabled = true; + + init.evt_handler = on_adv_evt; + + err_code = ble_advertising_init(&m_advertising, &init); + APP_ERROR_CHECK(err_code); + + ble_advertising_conn_cfg_tag_set(&m_advertising, APP_BLE_CONN_CFG_TAG); +} + + +/**@brief Function for initializing buttons and leds. + * + * @param[out] p_erase_bonds Will be true if the clear bonding button was pressed to wake the application up. + */ +static void buttons_leds_init(bool * p_erase_bonds) +{ + ret_code_t err_code; + bsp_event_t startup_event; + + err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS, bsp_event_handler); + APP_ERROR_CHECK(err_code); + + err_code = bsp_btn_ble_init(NULL, &startup_event); + APP_ERROR_CHECK(err_code); + + *p_erase_bonds = (startup_event == BSP_EVENT_CLEAR_BONDING_DATA); +} + + +/**@brief Function for initializing logging. + */ +static void log_init(void) +{ + ret_code_t err_code = NRF_LOG_INIT(NULL); + APP_ERROR_CHECK(err_code); + + NRF_LOG_DEFAULT_BACKENDS_INIT(); +} + + +/**@brief Function for initializing power management. + */ +static void power_management_init(void) +{ + ret_code_t err_code; + err_code = nrf_pwr_mgmt_init(); + APP_ERROR_CHECK(err_code); +} + + +/**@brief Function for handling the idle state (main loop). + * + * @details If there is no pending log operation, then sleep until next the next event occurs. + */ +static void idle_state_handle(void) +{ + if (NRF_LOG_PROCESS() == false) + { + nrf_pwr_mgmt_run(); + } +} + + +/**@brief Function for starting advertising. + */ +static void advertising_start(bool erase_bonds) +{ + if (erase_bonds == true) + { + delete_bonds(); + // Advertising is started by PM_EVT_PEERS_DELETE_SUCCEEDED event. + } + else + { + ret_code_t err_code = ble_advertising_start(&m_advertising, BLE_ADV_MODE_FAST); + + APP_ERROR_CHECK(err_code); + } +} + + +/**@brief Function for application main entry. + */ +int main(void) +{ + bool erase_bonds; + + // Initialize. + log_init(); + timers_init(); + buttons_leds_init(&erase_bonds); + power_management_init(); + ble_stack_init(); + gap_params_init(); + gatt_init(); + advertising_init(); + services_init(); + sensor_simulator_init(); + conn_params_init(); + peer_manager_init(); + + // Start execution. + NRF_LOG_INFO("Running Speed and Cadence example started."); + application_timers_start(); + + advertising_start(erase_bonds); + + // Enter main loop. + for (;;) + { + idle_state_handle(); + } +} + + +/** + * @} + */ -- cgit v1.2.3