From 3061ecca3d0fdfb87dabbf5f63c9e06c2a30f53a Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Thu, 23 Aug 2018 17:08:59 +0200 Subject: o Initial import. --- .../open_bootloader_usb_mbr_pca10059.uvoptx | 221 + .../open_bootloader_usb_mbr_pca10059.uvprojx | 1355 ++++++ .../open_bootloader/pca10059_usb/armgcc/Makefile | 251 ++ .../armgcc/open_bootloader_gcc_nrf52.ld | 103 + .../pca10059_usb/config/sdk_config.h | 4525 ++++++++++++++++++++ .../pca10059_usb/iar/open_bootloader_iar_nRF5x.icf | 36 + .../iar/open_bootloader_usb_mbr_pca10059.ewd | 1350 ++++++ .../iar/open_bootloader_usb_mbr_pca10059.ewp | 1164 +++++ .../pca10059_usb/ses/flash_placement.xml | 55 + .../ses/open_bootloader_usb_mbr_pca10059.emProject | 147 + .../ses/open_bootloader_usb_mbr_pca10059.emSession | 7 + 11 files changed, 9214 insertions(+) create mode 100644 thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/arm5_no_packs/open_bootloader_usb_mbr_pca10059.uvoptx create mode 100644 thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/arm5_no_packs/open_bootloader_usb_mbr_pca10059.uvprojx create mode 100644 thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/armgcc/Makefile create mode 100644 thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/armgcc/open_bootloader_gcc_nrf52.ld create mode 100644 thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/config/sdk_config.h create mode 100644 thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/iar/open_bootloader_iar_nRF5x.icf create mode 100644 thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/iar/open_bootloader_usb_mbr_pca10059.ewd create mode 100644 thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/iar/open_bootloader_usb_mbr_pca10059.ewp create mode 100644 thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/ses/flash_placement.xml create mode 100644 thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/ses/open_bootloader_usb_mbr_pca10059.emProject create mode 100644 thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/ses/open_bootloader_usb_mbr_pca10059.emSession (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb') diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/arm5_no_packs/open_bootloader_usb_mbr_pca10059.uvoptx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/arm5_no_packs/open_bootloader_usb_mbr_pca10059.uvoptx new file mode 100644 index 0000000..c2878f9 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/arm5_no_packs/open_bootloader_usb_mbr_pca10059.uvoptx @@ -0,0 +1,221 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + nrf52840_xxaa + 0x4 + ARM-ADS + + + 1 + 1 + 0 + 1 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\_build\ + + 0 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 0 + 1 + 1 + 1 + 0 + 0 + 7 + + + + + + + + + + + Segger\JL2CM3.dll + + + + 0 + JL2CM3 + -U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52840_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52840_xxAA$Flash\nrf52xxx_uicr.flm) + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52840_xxAA$Flash\nrf52xxx)) + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + flash_mbr + 0x4 + ARM-ADS + + + 1 + 1 + 0 + 1 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\_build\ + + 0 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 0 + 1 + 1 + 1 + 0 + 0 + 7 + + + + + + + + + + + Segger\JL2CM3.dll + + + + 0 + JL2CM3 + -U408001579 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(0BB11477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC2000 -FN2 -FF0nrf52xxx.flm -FS00 -FL0200000 -FP0($$Device:nRF52840_xxAA$Flash\nrf52xxx.flm) -FF1nrf52xxx_uicr -FS110001000 -FL11000 -FP1($$Device:nRF52840_xxAA$Flash\nrf52xxx_uicr.flm) + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf52xxx -FS00 -FL0200000 -FP0($$Device:nRF52840_xxAA$Flash\nrf52xxx)) + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/arm5_no_packs/open_bootloader_usb_mbr_pca10059.uvprojx b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/arm5_no_packs/open_bootloader_usb_mbr_pca10059.uvprojx new file mode 100644 index 0000000..b3b0567 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/arm5_no_packs/open_bootloader_usb_mbr_pca10059.uvprojx @@ -0,0 +1,1355 @@ + + + + 2.1 + +
### uVision Project, (C) Keil Software
+ + + nrf52840_xxaa + 0x4 + ARM-ADS + + nRF52840_xxAA + Nordic Semiconductor + NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0 + http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/ IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE + + + + 0 + $$Device:nRF52832_xxAA$Device\Include\nrf.h + + + + + + + + + + ..\..\..\..\..\modules\nrfx\mdk\nrf52840.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\_build\ + nrf52840_xxaa + 1 + 0 + 1 + 1 + 1 + .\_build\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + + + + SARMCM3.DLL + -MPU + TCM.DLL + -pCM4 + + + + 1 + 0 + 0 + 0 + 16 + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + + + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 0 + 1 1 + 0 + -1 + + + + + + + + + + + + + + Segger\JL2CM3.dll + + + + + 1 + 0 + 0 + 1 + 1 + 4099 + + 1 + Segger\JL2CM3.dll + + + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M4" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 2 + 0 + 0 + 8 + 1 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x40000 + + + 1 + 0x0 + 0x100000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0xe0000 + 0x1e000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000008 + 0x3fff8 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 4 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + + --reduce_paths + APP_TIMER_V2 APP_TIMER_V2_RTC1_ENABLED BOARD_PCA10059 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52840_XXAA NRF_DFU_SETTINGS_VERSION=1 SVC_INTERFACE_CALL_AS_NORMAL_FUNCTION __HEAP_SIZE=0 + + ..\..\config;..\..\..\..\..\components\boards;..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd;..\..\..\..\..\components\drivers_nrf\usbd;..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\components\libraries\atomic_fifo;..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\components\libraries\bootloader;..\..\..\..\..\components\libraries\bootloader\dfu;..\..\..\..\..\components\libraries\bootloader\serial_dfu;..\..\..\..\..\components\libraries\crc32;..\..\..\..\..\components\libraries\crypto;..\..\..\..\..\components\libraries\crypto\backend\cc310;..\..\..\..\..\components\libraries\crypto\backend\cc310_bl;..\..\..\..\..\components\libraries\crypto\backend\cifra;..\..\..\..\..\components\libraries\crypto\backend\mbedtls;..\..\..\..\..\components\libraries\crypto\backend\micro_ecc;..\..\..\..\..\components\libraries\crypto\backend\nrf_hw;..\..\..\..\..\components\libraries\crypto\backend\nrf_sw;..\..\..\..\..\components\libraries\crypto\backend\oberon;..\..\..\..\..\components\libraries\delay;..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\components\libraries\fstorage;..\..\..\..\..\components\libraries\led_softblink;..\..\..\..\..\components\libraries\low_power_pwm;..\..\..\..\..\components\libraries\mem_manager;..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\components\libraries\queue;..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\components\libraries\slip;..\..\..\..\..\components\libraries\sortlist;..\..\..\..\..\components\libraries\stack_info;..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\components\libraries\timer;..\..\..\..\..\components\libraries\timer\experimental;..\..\..\..\..\components\libraries\usbd;..\..\..\..\..\components\libraries\usbd\class\cdc;..\..\..\..\..\components\libraries\usbd\class\cdc\acm;..\..\..\..\..\components\libraries\usbd\config;..\..\..\..\..\components\libraries\util;..\..\..\..\..\components\softdevice\mbr\nrf52840\headers;..\..;..\..\..\..\..\external\fprintf;..\..\..\..\..\external\nano-pb;..\..\..\..\..\external\nrf_cc310\include;..\..\..\..\..\external\nrf_cc310_bl\include;..\..\..\..\..\integration\nrfx;..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\modules\nrfx;..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\modules\nrfx\mdk;..\config + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + --cpreproc_opts=-DAPP_TIMER_V2,-DAPP_TIMER_V2_RTC1_ENABLED,-DBOARD_PCA10059,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52840_XXAA,-DNRF_DFU_SETTINGS_VERSION=1,-DSVC_INTERFACE_CALL_AS_NORMAL_FUNCTION,-D__HEAP_SIZE=0 + APP_TIMER_V2 APP_TIMER_V2_RTC1_ENABLED BOARD_PCA10059 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52840_XXAA NRF_DFU_SETTINGS_VERSION=1 SVC_INTERFACE_CALL_AS_NORMAL_FUNCTION __HEAP_SIZE=0 + + ..\..\config;..\..\..\..\..\components\boards;..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd;..\..\..\..\..\components\drivers_nrf\usbd;..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\components\libraries\atomic_fifo;..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\components\libraries\bootloader;..\..\..\..\..\components\libraries\bootloader\dfu;..\..\..\..\..\components\libraries\bootloader\serial_dfu;..\..\..\..\..\components\libraries\crc32;..\..\..\..\..\components\libraries\crypto;..\..\..\..\..\components\libraries\crypto\backend\cc310;..\..\..\..\..\components\libraries\crypto\backend\cc310_bl;..\..\..\..\..\components\libraries\crypto\backend\cifra;..\..\..\..\..\components\libraries\crypto\backend\mbedtls;..\..\..\..\..\components\libraries\crypto\backend\micro_ecc;..\..\..\..\..\components\libraries\crypto\backend\nrf_hw;..\..\..\..\..\components\libraries\crypto\backend\nrf_sw;..\..\..\..\..\components\libraries\crypto\backend\oberon;..\..\..\..\..\components\libraries\delay;..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\components\libraries\fstorage;..\..\..\..\..\components\libraries\led_softblink;..\..\..\..\..\components\libraries\low_power_pwm;..\..\..\..\..\components\libraries\mem_manager;..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\components\libraries\queue;..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\components\libraries\slip;..\..\..\..\..\components\libraries\sortlist;..\..\..\..\..\components\libraries\stack_info;..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\components\libraries\timer;..\..\..\..\..\components\libraries\timer\experimental;..\..\..\..\..\components\libraries\usbd;..\..\..\..\..\components\libraries\usbd\class\cdc;..\..\..\..\..\components\libraries\usbd\class\cdc\acm;..\..\..\..\..\components\libraries\usbd\config;..\..\..\..\..\components\libraries\util;..\..\..\..\..\components\softdevice\mbr\nrf52840\headers;..\..;..\..\..\..\..\external\fprintf;..\..\..\..\..\external\nano-pb;..\..\..\..\..\external\nrf_cc310\include;..\..\..\..\..\external\nrf_cc310_bl\include;..\..\..\..\..\integration\nrfx;..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\modules\nrfx;..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\modules\nrfx\mdk;..\config + + + + 1 + 0 + 0 + 0 + 1 + 0 + 0x00000000 + 0x20000000 + + + + + --diag_suppress 6330 + + + + + + + Application + + dfu_public_key.c + 1 + ..\..\..\dfu_public_key.c + main.c + 1 + ..\..\main.c + sdk_config.h + 5 + ..\config\sdk_config.h + + Board Definition + + boards.c + 1 + ..\..\..\..\..\components\boards\boards.c + + nRF_Bootloader + + nrf_bootloader.c + 1 + ..\..\..\..\..\components\libraries\bootloader\nrf_bootloader.c + nrf_bootloader_app_start.c + 1 + ..\..\..\..\..\components\libraries\bootloader\nrf_bootloader_app_start.c + nrf_bootloader_app_start_final.c + 1 + ..\..\..\..\..\components\libraries\bootloader\nrf_bootloader_app_start_final.c + nrf_bootloader_dfu_timers.c + 1 + ..\..\..\..\..\components\libraries\bootloader\nrf_bootloader_dfu_timers.c + nrf_bootloader_fw_activation.c + 1 + ..\..\..\..\..\components\libraries\bootloader\nrf_bootloader_fw_activation.c + nrf_bootloader_info.c + 1 + ..\..\..\..\..\components\libraries\bootloader\nrf_bootloader_info.c + nrf_bootloader_wdt.c + 1 + ..\..\..\..\..\components\libraries\bootloader\nrf_bootloader_wdt.c + + nRF_Crypto + + nrf_crypto_ecc.c + 1 + ..\..\..\..\..\components\libraries\crypto\nrf_crypto_ecc.c + nrf_crypto_ecdsa.c + 1 + ..\..\..\..\..\components\libraries\crypto\nrf_crypto_ecdsa.c + nrf_crypto_hash.c + 1 + ..\..\..\..\..\components\libraries\crypto\nrf_crypto_hash.c + nrf_crypto_init.c + 1 + ..\..\..\..\..\components\libraries\crypto\nrf_crypto_init.c + nrf_crypto_shared.c + 1 + ..\..\..\..\..\components\libraries\crypto\nrf_crypto_shared.c + + nRF_Crypto backend CC310_BL + + cc310_bl_backend_ecc.c + 1 + ..\..\..\..\..\components\libraries\crypto\backend\cc310_bl\cc310_bl_backend_ecc.c + cc310_bl_backend_ecdsa.c + 1 + ..\..\..\..\..\components\libraries\crypto\backend\cc310_bl\cc310_bl_backend_ecdsa.c + cc310_bl_backend_hash.c + 1 + ..\..\..\..\..\components\libraries\crypto\backend\cc310_bl\cc310_bl_backend_hash.c + cc310_bl_backend_init.c + 1 + ..\..\..\..\..\components\libraries\crypto\backend\cc310_bl\cc310_bl_backend_init.c + cc310_bl_backend_shared.c + 1 + ..\..\..\..\..\components\libraries\crypto\backend\cc310_bl\cc310_bl_backend_shared.c + + nRF_DFU + + dfu-cc.pb.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\dfu-cc.pb.c + nrf_dfu.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu.c + nrf_dfu_flash.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_flash.c + nrf_dfu_handling_error.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_handling_error.c + nrf_dfu_mbr.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_mbr.c + nrf_dfu_req_handler.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_req_handler.c + nrf_dfu_settings.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_settings.c + nrf_dfu_transport.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_transport.c + nrf_dfu_utils.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_utils.c + nrf_dfu_validation.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_validation.c + nrf_dfu_ver_validation.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_ver_validation.c + + nRF_Drivers + + nrf_drv_clock.c + 1 + ..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c + nrf_drv_power.c + 1 + ..\..\..\..\..\integration\nrfx\legacy\nrf_drv_power.c + nrf_drv_usbd.c + 1 + ..\..\..\..\..\components\drivers_nrf\usbd\nrf_drv_usbd.c + nrf_nvic.c + 1 + ..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_nvic.c + nrf_nvmc.c + 1 + ..\..\..\..\..\modules\nrfx\hal\nrf_nvmc.c + nrf_soc.c + 1 + ..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c + nrfx_clock.c + 1 + ..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c + nrfx_power.c + 1 + ..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power.c + nrfx_power_clock.c + 1 + ..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c + + nRF_Libraries + + app_error_weak.c + 1 + ..\..\..\..\..\components\libraries\util\app_error_weak.c + app_scheduler.c + 1 + ..\..\..\..\..\components\libraries\scheduler\app_scheduler.c + app_timer2.c + 1 + ..\..\..\..\..\components\libraries\timer\experimental\app_timer2.c + app_usbd.c + 1 + ..\..\..\..\..\components\libraries\usbd\app_usbd.c + app_usbd_cdc_acm.c + 1 + ..\..\..\..\..\components\libraries\usbd\class\cdc\acm\app_usbd_cdc_acm.c + app_usbd_core.c + 1 + ..\..\..\..\..\components\libraries\usbd\app_usbd_core.c + app_usbd_serial_num.c + 1 + ..\..\..\..\..\components\libraries\usbd\app_usbd_serial_num.c + app_usbd_string_desc.c + 1 + ..\..\..\..\..\components\libraries\usbd\app_usbd_string_desc.c + app_util_platform.c + 1 + ..\..\..\..\..\components\libraries\util\app_util_platform.c + crc32.c + 1 + ..\..\..\..\..\components\libraries\crc32\crc32.c + drv_rtc.c + 1 + ..\..\..\..\..\components\libraries\timer\experimental\drv_rtc.c + led_softblink.c + 1 + ..\..\..\..\..\components\libraries\led_softblink\led_softblink.c + low_power_pwm.c + 1 + ..\..\..\..\..\components\libraries\low_power_pwm\low_power_pwm.c + mem_manager.c + 1 + ..\..\..\..\..\components\libraries\mem_manager\mem_manager.c + nrf_assert.c + 1 + ..\..\..\..\..\components\libraries\util\nrf_assert.c + nrf_atfifo.c + 1 + ..\..\..\..\..\components\libraries\atomic_fifo\nrf_atfifo.c + nrf_atomic.c + 1 + ..\..\..\..\..\components\libraries\atomic\nrf_atomic.c + nrf_balloc.c + 1 + ..\..\..\..\..\components\libraries\balloc\nrf_balloc.c + nrf_fprintf.c + 1 + ..\..\..\..\..\external\fprintf\nrf_fprintf.c + nrf_fprintf_format.c + 1 + ..\..\..\..\..\external\fprintf\nrf_fprintf_format.c + nrf_fstorage.c + 1 + ..\..\..\..\..\components\libraries\fstorage\nrf_fstorage.c + nrf_fstorage_nvmc.c + 1 + ..\..\..\..\..\components\libraries\fstorage\nrf_fstorage_nvmc.c + nrf_memobj.c + 1 + ..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c + nrf_queue.c + 1 + ..\..\..\..\..\components\libraries\queue\nrf_queue.c + nrf_sortlist.c + 1 + ..\..\..\..\..\components\libraries\sortlist\nrf_sortlist.c + nrf_strerror.c + 1 + ..\..\..\..\..\components\libraries\strerror\nrf_strerror.c + slip.c + 1 + ..\..\..\..\..\components\libraries\slip\slip.c + + nRF_Log + + nrf_log_frontend.c + 1 + ..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c + nrf_log_str_formatter.c + 1 + ..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c + + nRF_Serial_DFU + + nrf_dfu_serial.c + 1 + ..\..\..\..\..\components\libraries\bootloader\serial_dfu\nrf_dfu_serial.c + + nRF_USB_DFU + + nrf_dfu_serial_usb.c + 1 + ..\..\..\..\..\components\libraries\bootloader\serial_dfu\nrf_dfu_serial_usb.c + + nano-pb + + pb_common.c + 1 + ..\..\..\..\..\external\nano-pb\pb_common.c + pb_decode.c + 1 + ..\..\..\..\..\external\nano-pb\pb_decode.c + + nrf_cc310_bl + + nrf_cc310_bl_keil_0.9.9.lib + 4 + ..\..\..\..\..\external\nrf_cc310_bl\lib\nrf_cc310_bl_keil_0.9.9.lib + + + flash_mbr + 0x4 + ARM-ADS + + nRF52840_xxAA + Nordic Semiconductor + NordicSemiconductor.nRF_DeviceFamilyPack.8.16.0 + http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/ IROM(0x00000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M4") FPU2 CLOCK(64000000) ELITTLE + + + + 0 + $$Device:nRF52832_xxAA$Device\Include\nrf.h + + + + + + + + + + ..\..\..\..\..\modules\nrfx\mdk\nrf52840.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + ..\..\..\..\..\components\softdevice\mbr\nrf52840\hex\ + mbr_nrf52_2.3.0_mbr.hex + 1 + 0 + 1 + 1 + 1 + .\_build\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + + + + + SARMCM3.DLL + -MPU + TCM.DLL + -pCM4 + + + + 1 + 0 + 0 + 0 + 16 + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + + + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 0 + 1 1 + 0 + -1 + + + + + + + + + + + + + + Segger\JL2CM3.dll + + + + + 1 + 0 + 0 + 1 + 1 + 4099 + + 1 + Segger\JL2CM3.dll + + + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M4" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 2 + 0 + 0 + 8 + 1 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x40000 + + + 1 + 0x0 + 0x100000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0xe0000 + 0x1e000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000008 + 0x3fff8 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 4 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + + --reduce_paths + APP_TIMER_V2 APP_TIMER_V2_RTC1_ENABLED BOARD_PCA10059 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52840_XXAA NRF_DFU_SETTINGS_VERSION=1 SVC_INTERFACE_CALL_AS_NORMAL_FUNCTION __HEAP_SIZE=0 + + ..\..\config;..\..\..\..\..\components\boards;..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd;..\..\..\..\..\components\drivers_nrf\usbd;..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\components\libraries\atomic_fifo;..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\components\libraries\bootloader;..\..\..\..\..\components\libraries\bootloader\dfu;..\..\..\..\..\components\libraries\bootloader\serial_dfu;..\..\..\..\..\components\libraries\crc32;..\..\..\..\..\components\libraries\crypto;..\..\..\..\..\components\libraries\crypto\backend\cc310;..\..\..\..\..\components\libraries\crypto\backend\cc310_bl;..\..\..\..\..\components\libraries\crypto\backend\cifra;..\..\..\..\..\components\libraries\crypto\backend\mbedtls;..\..\..\..\..\components\libraries\crypto\backend\micro_ecc;..\..\..\..\..\components\libraries\crypto\backend\nrf_hw;..\..\..\..\..\components\libraries\crypto\backend\nrf_sw;..\..\..\..\..\components\libraries\crypto\backend\oberon;..\..\..\..\..\components\libraries\delay;..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\components\libraries\fstorage;..\..\..\..\..\components\libraries\led_softblink;..\..\..\..\..\components\libraries\low_power_pwm;..\..\..\..\..\components\libraries\mem_manager;..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\components\libraries\queue;..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\components\libraries\slip;..\..\..\..\..\components\libraries\sortlist;..\..\..\..\..\components\libraries\stack_info;..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\components\libraries\timer;..\..\..\..\..\components\libraries\timer\experimental;..\..\..\..\..\components\libraries\usbd;..\..\..\..\..\components\libraries\usbd\class\cdc;..\..\..\..\..\components\libraries\usbd\class\cdc\acm;..\..\..\..\..\components\libraries\usbd\config;..\..\..\..\..\components\libraries\util;..\..\..\..\..\components\softdevice\mbr\nrf52840\headers;..\..;..\..\..\..\..\external\fprintf;..\..\..\..\..\external\nano-pb;..\..\..\..\..\external\nrf_cc310\include;..\..\..\..\..\external\nrf_cc310_bl\include;..\..\..\..\..\integration\nrfx;..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\modules\nrfx;..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\modules\nrfx\mdk;..\config + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + --cpreproc_opts=-DAPP_TIMER_V2,-DAPP_TIMER_V2_RTC1_ENABLED,-DBOARD_PCA10059,-DCONFIG_GPIO_AS_PINRESET,-DFLOAT_ABI_HARD,-DNRF52840_XXAA,-DNRF_DFU_SETTINGS_VERSION=1,-DSVC_INTERFACE_CALL_AS_NORMAL_FUNCTION,-D__HEAP_SIZE=0 + APP_TIMER_V2 APP_TIMER_V2_RTC1_ENABLED BOARD_PCA10059 CONFIG_GPIO_AS_PINRESET FLOAT_ABI_HARD NRF52840_XXAA NRF_DFU_SETTINGS_VERSION=1 SVC_INTERFACE_CALL_AS_NORMAL_FUNCTION __HEAP_SIZE=0 + + ..\..\config;..\..\..\..\..\components\boards;..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd;..\..\..\..\..\components\drivers_nrf\usbd;..\..\..\..\..\components\libraries\atomic;..\..\..\..\..\components\libraries\atomic_fifo;..\..\..\..\..\components\libraries\balloc;..\..\..\..\..\components\libraries\bootloader;..\..\..\..\..\components\libraries\bootloader\dfu;..\..\..\..\..\components\libraries\bootloader\serial_dfu;..\..\..\..\..\components\libraries\crc32;..\..\..\..\..\components\libraries\crypto;..\..\..\..\..\components\libraries\crypto\backend\cc310;..\..\..\..\..\components\libraries\crypto\backend\cc310_bl;..\..\..\..\..\components\libraries\crypto\backend\cifra;..\..\..\..\..\components\libraries\crypto\backend\mbedtls;..\..\..\..\..\components\libraries\crypto\backend\micro_ecc;..\..\..\..\..\components\libraries\crypto\backend\nrf_hw;..\..\..\..\..\components\libraries\crypto\backend\nrf_sw;..\..\..\..\..\components\libraries\crypto\backend\oberon;..\..\..\..\..\components\libraries\delay;..\..\..\..\..\components\libraries\experimental_log;..\..\..\..\..\components\libraries\experimental_log\src;..\..\..\..\..\components\libraries\experimental_memobj;..\..\..\..\..\components\libraries\experimental_section_vars;..\..\..\..\..\components\libraries\fstorage;..\..\..\..\..\components\libraries\led_softblink;..\..\..\..\..\components\libraries\low_power_pwm;..\..\..\..\..\components\libraries\mem_manager;..\..\..\..\..\components\libraries\mutex;..\..\..\..\..\components\libraries\queue;..\..\..\..\..\components\libraries\scheduler;..\..\..\..\..\components\libraries\slip;..\..\..\..\..\components\libraries\sortlist;..\..\..\..\..\components\libraries\stack_info;..\..\..\..\..\components\libraries\strerror;..\..\..\..\..\components\libraries\timer;..\..\..\..\..\components\libraries\timer\experimental;..\..\..\..\..\components\libraries\usbd;..\..\..\..\..\components\libraries\usbd\class\cdc;..\..\..\..\..\components\libraries\usbd\class\cdc\acm;..\..\..\..\..\components\libraries\usbd\config;..\..\..\..\..\components\libraries\util;..\..\..\..\..\components\softdevice\mbr\nrf52840\headers;..\..;..\..\..\..\..\external\fprintf;..\..\..\..\..\external\nano-pb;..\..\..\..\..\external\nrf_cc310\include;..\..\..\..\..\external\nrf_cc310_bl\include;..\..\..\..\..\integration\nrfx;..\..\..\..\..\integration\nrfx\legacy;..\..\..\..\..\modules\nrfx;..\..\..\..\..\modules\nrfx\drivers\include;..\..\..\..\..\modules\nrfx\hal;..\..\..\..\..\modules\nrfx\mdk;..\config + + + + 1 + 0 + 0 + 0 + 1 + 0 + 0x00000000 + 0x20000000 + + + + + --diag_suppress 6330 + + + + + + + Application + + dfu_public_key.c + 1 + ..\..\..\dfu_public_key.c + main.c + 1 + ..\..\main.c + sdk_config.h + 5 + ..\config\sdk_config.h + + Board Definition + + boards.c + 1 + ..\..\..\..\..\components\boards\boards.c + + nRF_Bootloader + + nrf_bootloader.c + 1 + ..\..\..\..\..\components\libraries\bootloader\nrf_bootloader.c + nrf_bootloader_app_start.c + 1 + ..\..\..\..\..\components\libraries\bootloader\nrf_bootloader_app_start.c + nrf_bootloader_app_start_final.c + 1 + ..\..\..\..\..\components\libraries\bootloader\nrf_bootloader_app_start_final.c + nrf_bootloader_dfu_timers.c + 1 + ..\..\..\..\..\components\libraries\bootloader\nrf_bootloader_dfu_timers.c + nrf_bootloader_fw_activation.c + 1 + ..\..\..\..\..\components\libraries\bootloader\nrf_bootloader_fw_activation.c + nrf_bootloader_info.c + 1 + ..\..\..\..\..\components\libraries\bootloader\nrf_bootloader_info.c + nrf_bootloader_wdt.c + 1 + ..\..\..\..\..\components\libraries\bootloader\nrf_bootloader_wdt.c + + nRF_Crypto + + nrf_crypto_ecc.c + 1 + ..\..\..\..\..\components\libraries\crypto\nrf_crypto_ecc.c + nrf_crypto_ecdsa.c + 1 + ..\..\..\..\..\components\libraries\crypto\nrf_crypto_ecdsa.c + nrf_crypto_hash.c + 1 + ..\..\..\..\..\components\libraries\crypto\nrf_crypto_hash.c + nrf_crypto_init.c + 1 + ..\..\..\..\..\components\libraries\crypto\nrf_crypto_init.c + nrf_crypto_shared.c + 1 + ..\..\..\..\..\components\libraries\crypto\nrf_crypto_shared.c + + nRF_Crypto backend CC310_BL + + cc310_bl_backend_ecc.c + 1 + ..\..\..\..\..\components\libraries\crypto\backend\cc310_bl\cc310_bl_backend_ecc.c + cc310_bl_backend_ecdsa.c + 1 + ..\..\..\..\..\components\libraries\crypto\backend\cc310_bl\cc310_bl_backend_ecdsa.c + cc310_bl_backend_hash.c + 1 + ..\..\..\..\..\components\libraries\crypto\backend\cc310_bl\cc310_bl_backend_hash.c + cc310_bl_backend_init.c + 1 + ..\..\..\..\..\components\libraries\crypto\backend\cc310_bl\cc310_bl_backend_init.c + cc310_bl_backend_shared.c + 1 + ..\..\..\..\..\components\libraries\crypto\backend\cc310_bl\cc310_bl_backend_shared.c + + nRF_DFU + + dfu-cc.pb.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\dfu-cc.pb.c + nrf_dfu.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu.c + nrf_dfu_flash.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_flash.c + nrf_dfu_handling_error.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_handling_error.c + nrf_dfu_mbr.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_mbr.c + nrf_dfu_req_handler.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_req_handler.c + nrf_dfu_settings.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_settings.c + nrf_dfu_transport.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_transport.c + nrf_dfu_utils.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_utils.c + nrf_dfu_validation.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_validation.c + nrf_dfu_ver_validation.c + 1 + ..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_ver_validation.c + + nRF_Drivers + + nrf_drv_clock.c + 1 + ..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c + nrf_drv_power.c + 1 + ..\..\..\..\..\integration\nrfx\legacy\nrf_drv_power.c + nrf_drv_usbd.c + 1 + ..\..\..\..\..\components\drivers_nrf\usbd\nrf_drv_usbd.c + nrf_nvic.c + 1 + ..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_nvic.c + nrf_nvmc.c + 1 + ..\..\..\..\..\modules\nrfx\hal\nrf_nvmc.c + nrf_soc.c + 1 + ..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c + nrfx_clock.c + 1 + ..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c + nrfx_power.c + 1 + ..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power.c + nrfx_power_clock.c + 1 + ..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c + + nRF_Libraries + + app_error_weak.c + 1 + ..\..\..\..\..\components\libraries\util\app_error_weak.c + app_scheduler.c + 1 + ..\..\..\..\..\components\libraries\scheduler\app_scheduler.c + app_timer2.c + 1 + ..\..\..\..\..\components\libraries\timer\experimental\app_timer2.c + app_usbd.c + 1 + ..\..\..\..\..\components\libraries\usbd\app_usbd.c + app_usbd_cdc_acm.c + 1 + ..\..\..\..\..\components\libraries\usbd\class\cdc\acm\app_usbd_cdc_acm.c + app_usbd_core.c + 1 + ..\..\..\..\..\components\libraries\usbd\app_usbd_core.c + app_usbd_serial_num.c + 1 + ..\..\..\..\..\components\libraries\usbd\app_usbd_serial_num.c + app_usbd_string_desc.c + 1 + ..\..\..\..\..\components\libraries\usbd\app_usbd_string_desc.c + app_util_platform.c + 1 + ..\..\..\..\..\components\libraries\util\app_util_platform.c + crc32.c + 1 + ..\..\..\..\..\components\libraries\crc32\crc32.c + drv_rtc.c + 1 + ..\..\..\..\..\components\libraries\timer\experimental\drv_rtc.c + led_softblink.c + 1 + ..\..\..\..\..\components\libraries\led_softblink\led_softblink.c + low_power_pwm.c + 1 + ..\..\..\..\..\components\libraries\low_power_pwm\low_power_pwm.c + mem_manager.c + 1 + ..\..\..\..\..\components\libraries\mem_manager\mem_manager.c + nrf_assert.c + 1 + ..\..\..\..\..\components\libraries\util\nrf_assert.c + nrf_atfifo.c + 1 + ..\..\..\..\..\components\libraries\atomic_fifo\nrf_atfifo.c + nrf_atomic.c + 1 + ..\..\..\..\..\components\libraries\atomic\nrf_atomic.c + nrf_balloc.c + 1 + ..\..\..\..\..\components\libraries\balloc\nrf_balloc.c + nrf_fprintf.c + 1 + ..\..\..\..\..\external\fprintf\nrf_fprintf.c + nrf_fprintf_format.c + 1 + ..\..\..\..\..\external\fprintf\nrf_fprintf_format.c + nrf_fstorage.c + 1 + ..\..\..\..\..\components\libraries\fstorage\nrf_fstorage.c + nrf_fstorage_nvmc.c + 1 + ..\..\..\..\..\components\libraries\fstorage\nrf_fstorage_nvmc.c + nrf_memobj.c + 1 + ..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c + nrf_queue.c + 1 + ..\..\..\..\..\components\libraries\queue\nrf_queue.c + nrf_sortlist.c + 1 + ..\..\..\..\..\components\libraries\sortlist\nrf_sortlist.c + nrf_strerror.c + 1 + ..\..\..\..\..\components\libraries\strerror\nrf_strerror.c + slip.c + 1 + ..\..\..\..\..\components\libraries\slip\slip.c + + nRF_Log + + nrf_log_frontend.c + 1 + ..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c + nrf_log_str_formatter.c + 1 + ..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c + + nRF_Serial_DFU + + nrf_dfu_serial.c + 1 + ..\..\..\..\..\components\libraries\bootloader\serial_dfu\nrf_dfu_serial.c + + nRF_USB_DFU + + nrf_dfu_serial_usb.c + 1 + ..\..\..\..\..\components\libraries\bootloader\serial_dfu\nrf_dfu_serial_usb.c + + nano-pb + + pb_common.c + 1 + ..\..\..\..\..\external\nano-pb\pb_common.c + pb_decode.c + 1 + ..\..\..\..\..\external\nano-pb\pb_decode.c + + nrf_cc310_bl + + nrf_cc310_bl_keil_0.9.9.lib + 4 + ..\..\..\..\..\external\nrf_cc310_bl\lib\nrf_cc310_bl_keil_0.9.9.lib + + + + + + + + + + + + + + + + + + + + + + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/armgcc/Makefile b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/armgcc/Makefile new file mode 100644 index 0000000..d3269a6 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/armgcc/Makefile @@ -0,0 +1,251 @@ +PROJECT_NAME := open_bootloader_usb_mbr_pca10059 +TARGETS := nrf52840_xxaa +OUTPUT_DIRECTORY := _build + +SDK_ROOT := ../../../../.. +PROJ_DIR := ../.. + +$(OUTPUT_DIRECTORY)/nrf52840_xxaa.out: \ + LINKER_SCRIPT := open_bootloader_gcc_nrf52.ld + +# Source files common to all targets +SRC_FILES += \ + $(SDK_ROOT)/modules/nrfx/mdk/gcc_startup_nrf52840.S \ + $(SDK_ROOT)/components/libraries/bootloader/serial_dfu/nrf_dfu_serial_usb.c \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_frontend.c \ + $(SDK_ROOT)/components/libraries/experimental_log/src/nrf_log_str_formatter.c \ + $(SDK_ROOT)/components/boards/boards.c \ + $(SDK_ROOT)/modules/nrfx/mdk/system_nrf52840.c \ + $(SDK_ROOT)/components/libraries/crypto/backend/cc310_bl/cc310_bl_backend_ecc.c \ + $(SDK_ROOT)/components/libraries/crypto/backend/cc310_bl/cc310_bl_backend_ecdsa.c \ + $(SDK_ROOT)/components/libraries/crypto/backend/cc310_bl/cc310_bl_backend_hash.c \ + $(SDK_ROOT)/components/libraries/crypto/backend/cc310_bl/cc310_bl_backend_init.c \ + $(SDK_ROOT)/components/libraries/crypto/backend/cc310_bl/cc310_bl_backend_shared.c \ + $(SDK_ROOT)/components/libraries/util/app_error_weak.c \ + $(SDK_ROOT)/components/libraries/scheduler/app_scheduler.c \ + $(SDK_ROOT)/components/libraries/timer/experimental/app_timer2.c \ + $(SDK_ROOT)/components/libraries/usbd/app_usbd.c \ + $(SDK_ROOT)/components/libraries/usbd/class/cdc/acm/app_usbd_cdc_acm.c \ + $(SDK_ROOT)/components/libraries/usbd/app_usbd_core.c \ + $(SDK_ROOT)/components/libraries/usbd/app_usbd_serial_num.c \ + $(SDK_ROOT)/components/libraries/usbd/app_usbd_string_desc.c \ + $(SDK_ROOT)/components/libraries/util/app_util_platform.c \ + $(SDK_ROOT)/components/libraries/crc32/crc32.c \ + $(SDK_ROOT)/components/libraries/timer/experimental/drv_rtc.c \ + $(SDK_ROOT)/components/libraries/led_softblink/led_softblink.c \ + $(SDK_ROOT)/components/libraries/low_power_pwm/low_power_pwm.c \ + $(SDK_ROOT)/components/libraries/mem_manager/mem_manager.c \ + $(SDK_ROOT)/components/libraries/util/nrf_assert.c \ + $(SDK_ROOT)/components/libraries/atomic_fifo/nrf_atfifo.c \ + $(SDK_ROOT)/components/libraries/atomic/nrf_atomic.c \ + $(SDK_ROOT)/components/libraries/balloc/nrf_balloc.c \ + $(SDK_ROOT)/external/fprintf/nrf_fprintf.c \ + $(SDK_ROOT)/external/fprintf/nrf_fprintf_format.c \ + $(SDK_ROOT)/components/libraries/fstorage/nrf_fstorage.c \ + $(SDK_ROOT)/components/libraries/fstorage/nrf_fstorage_nvmc.c \ + $(SDK_ROOT)/components/libraries/experimental_memobj/nrf_memobj.c \ + $(SDK_ROOT)/components/libraries/queue/nrf_queue.c \ + $(SDK_ROOT)/components/libraries/sortlist/nrf_sortlist.c \ + $(SDK_ROOT)/components/libraries/strerror/nrf_strerror.c \ + $(SDK_ROOT)/components/libraries/slip/slip.c \ + $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_clock.c \ + $(SDK_ROOT)/integration/nrfx/legacy/nrf_drv_power.c \ + $(SDK_ROOT)/components/drivers_nrf/usbd/nrf_drv_usbd.c \ + $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd/nrf_nvic.c \ + $(SDK_ROOT)/modules/nrfx/hal/nrf_nvmc.c \ + $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd/nrf_soc.c \ + $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_clock.c \ + $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_power.c \ + $(SDK_ROOT)/modules/nrfx/drivers/src/nrfx_power_clock.c \ + $(SDK_ROOT)/components/libraries/crypto/nrf_crypto_ecc.c \ + $(SDK_ROOT)/components/libraries/crypto/nrf_crypto_ecdsa.c \ + $(SDK_ROOT)/components/libraries/crypto/nrf_crypto_hash.c \ + $(SDK_ROOT)/components/libraries/crypto/nrf_crypto_init.c \ + $(SDK_ROOT)/components/libraries/crypto/nrf_crypto_shared.c \ + $(PROJ_DIR)/../dfu_public_key.c \ + $(PROJ_DIR)/main.c \ + $(SDK_ROOT)/external/nano-pb/pb_common.c \ + $(SDK_ROOT)/external/nano-pb/pb_decode.c \ + $(SDK_ROOT)/components/libraries/bootloader/dfu/dfu-cc.pb.c \ + $(SDK_ROOT)/components/libraries/bootloader/dfu/nrf_dfu.c \ + $(SDK_ROOT)/components/libraries/bootloader/dfu/nrf_dfu_flash.c \ + $(SDK_ROOT)/components/libraries/bootloader/dfu/nrf_dfu_handling_error.c \ + $(SDK_ROOT)/components/libraries/bootloader/dfu/nrf_dfu_mbr.c \ + $(SDK_ROOT)/components/libraries/bootloader/dfu/nrf_dfu_req_handler.c \ + $(SDK_ROOT)/components/libraries/bootloader/dfu/nrf_dfu_settings.c \ + $(SDK_ROOT)/components/libraries/bootloader/dfu/nrf_dfu_transport.c \ + $(SDK_ROOT)/components/libraries/bootloader/dfu/nrf_dfu_utils.c \ + $(SDK_ROOT)/components/libraries/bootloader/dfu/nrf_dfu_validation.c \ + $(SDK_ROOT)/components/libraries/bootloader/dfu/nrf_dfu_ver_validation.c \ + $(SDK_ROOT)/components/libraries/bootloader/serial_dfu/nrf_dfu_serial.c \ + $(SDK_ROOT)/components/libraries/bootloader/nrf_bootloader.c \ + $(SDK_ROOT)/components/libraries/bootloader/nrf_bootloader_app_start.c \ + $(SDK_ROOT)/components/libraries/bootloader/nrf_bootloader_app_start_final.c \ + $(SDK_ROOT)/components/libraries/bootloader/nrf_bootloader_dfu_timers.c \ + $(SDK_ROOT)/components/libraries/bootloader/nrf_bootloader_fw_activation.c \ + $(SDK_ROOT)/components/libraries/bootloader/nrf_bootloader_info.c \ + $(SDK_ROOT)/components/libraries/bootloader/nrf_bootloader_wdt.c \ + +# Include folders common to all targets +INC_FOLDERS += \ + $(PROJ_DIR)/config \ + $(SDK_ROOT)/modules/nrfx/drivers/include \ + $(SDK_ROOT)/components/libraries/crypto/backend/micro_ecc \ + $(SDK_ROOT)/modules/nrfx/hal \ + $(SDK_ROOT)/components/libraries/crc32 \ + $(SDK_ROOT)/components/libraries/experimental_section_vars \ + $(SDK_ROOT)/components/libraries/mem_manager \ + $(SDK_ROOT)/components/libraries/crypto/backend/nrf_sw \ + $(SDK_ROOT)/components/libraries/util \ + $(SDK_ROOT)/modules/nrfx \ + $(SDK_ROOT)/components/libraries/timer/experimental \ + $(SDK_ROOT)/components/libraries/timer \ + $(SDK_ROOT)/components/libraries/crypto/backend/oberon \ + $(SDK_ROOT)/components/libraries/low_power_pwm \ + $(SDK_ROOT)/components/libraries/crypto/backend/cifra \ + $(SDK_ROOT)/components/libraries/atomic \ + $(SDK_ROOT)/integration/nrfx \ + $(SDK_ROOT)/components/libraries/crypto/backend/cc310_bl \ + $(SDK_ROOT)/components/drivers_nrf/nrf_soc_nosd \ + $(SDK_ROOT)/components/softdevice/mbr/nrf52840/headers \ + $(SDK_ROOT)/components/libraries/bootloader/dfu \ + $(SDK_ROOT)/components/libraries/bootloader/serial_dfu \ + $(SDK_ROOT)/components/libraries/usbd/config \ + $(SDK_ROOT)/external/nrf_cc310_bl/include \ + $(SDK_ROOT)/components/libraries/usbd/class/cdc \ + $(SDK_ROOT)/components/libraries/usbd \ + $(SDK_ROOT)/components/libraries/delay \ + $(SDK_ROOT)/integration/nrfx/legacy \ + $(SDK_ROOT)/components/libraries/stack_info \ + $(SDK_ROOT)/components/libraries/crypto/backend/nrf_hw \ + $(SDK_ROOT)/components/libraries/led_softblink \ + $(SDK_ROOT)/components/libraries/strerror \ + $(SDK_ROOT)/components/libraries/crypto/backend/mbedtls \ + $(SDK_ROOT)/components/boards \ + $(SDK_ROOT)/components/libraries/crypto/backend/cc310 \ + $(SDK_ROOT)/components/libraries/bootloader \ + $(SDK_ROOT)/external/fprintf \ + $(SDK_ROOT)/components/libraries/crypto \ + ../config \ + $(SDK_ROOT)/components/libraries/scheduler \ + $(SDK_ROOT)/components/libraries/slip \ + $(SDK_ROOT)/components/libraries/experimental_log/src \ + $(SDK_ROOT)/components/toolchain/cmsis/include \ + $(SDK_ROOT)/components/libraries/usbd/class/cdc/acm \ + $(SDK_ROOT)/components/libraries/balloc \ + $(SDK_ROOT)/components/libraries/atomic_fifo \ + $(PROJ_DIR) \ + $(SDK_ROOT)/components/libraries/sortlist \ + $(SDK_ROOT)/components/libraries/fstorage \ + $(SDK_ROOT)/modules/nrfx/mdk \ + $(SDK_ROOT)/components/libraries/mutex \ + $(SDK_ROOT)/external/nrf_cc310/include \ + $(SDK_ROOT)/external/nano-pb \ + $(SDK_ROOT)/components/libraries/queue \ + $(SDK_ROOT)/components/libraries/experimental_log \ + $(SDK_ROOT)/components/libraries/experimental_memobj \ + $(SDK_ROOT)/components/drivers_nrf/usbd \ + +# Libraries common to all targets +LIB_FILES += \ + $(SDK_ROOT)/external/nrf_cc310_bl/lib/libnrf_cc310_bl_0.9.9.a \ + +# Optimization flags +OPT = -Os -g3 +# Uncomment the line below to enable link time optimization +#OPT += -flto + +# C flags common to all targets +CFLAGS += $(OPT) +CFLAGS += -DAPP_TIMER_V2 +CFLAGS += -DAPP_TIMER_V2_RTC1_ENABLED +CFLAGS += -DBOARD_PCA10059 +CFLAGS += -DCONFIG_GPIO_AS_PINRESET +CFLAGS += -DFLOAT_ABI_HARD +CFLAGS += -DNRF52840_XXAA +CFLAGS += -DNRF_DFU_SETTINGS_VERSION=1 +CFLAGS += -DSVC_INTERFACE_CALL_AS_NORMAL_FUNCTION +CFLAGS += -mcpu=cortex-m4 +CFLAGS += -mthumb -mabi=aapcs +CFLAGS += -Wall -Werror +CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 +# keep every function in a separate section, this allows linker to discard unused ones +CFLAGS += -ffunction-sections -fdata-sections -fno-strict-aliasing +CFLAGS += -fno-builtin -fshort-enums -flto + +# C++ flags common to all targets +CXXFLAGS += $(OPT) + +# Assembler flags common to all targets +ASMFLAGS += -g3 +ASMFLAGS += -mcpu=cortex-m4 +ASMFLAGS += -mthumb -mabi=aapcs +ASMFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 +ASMFLAGS += -DAPP_TIMER_V2 +ASMFLAGS += -DAPP_TIMER_V2_RTC1_ENABLED +ASMFLAGS += -DBOARD_PCA10059 +ASMFLAGS += -DCONFIG_GPIO_AS_PINRESET +ASMFLAGS += -DFLOAT_ABI_HARD +ASMFLAGS += -DNRF52840_XXAA +ASMFLAGS += -DNRF_DFU_SETTINGS_VERSION=1 +ASMFLAGS += -DSVC_INTERFACE_CALL_AS_NORMAL_FUNCTION + +# Linker flags +LDFLAGS += $(OPT) +LDFLAGS += -mthumb -mabi=aapcs -L$(SDK_ROOT)/modules/nrfx/mdk -T$(LINKER_SCRIPT) +LDFLAGS += -mcpu=cortex-m4 +LDFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16 +# let linker dump unused sections +LDFLAGS += -Wl,--gc-sections +# use newlib in nano version +LDFLAGS += --specs=nano.specs + +nrf52840_xxaa: CFLAGS += -D__HEAP_SIZE=0 +nrf52840_xxaa: ASMFLAGS += -D__HEAP_SIZE=0 + +# Add standard libraries at the very end of the linker input, after all objects +# that may need symbols provided by these libraries. +LIB_FILES += -lc -lnosys -lm + + +.PHONY: default help + +# Default target - first one defined +default: nrf52840_xxaa + +# Print all targets that can be built +help: + @echo following targets are available: + @echo nrf52840_xxaa + @echo flash_mbr + @echo sdk_config - starting external tool for editing sdk_config.h + @echo flash - flashing binary + +TEMPLATE_PATH := $(SDK_ROOT)/components/toolchain/gcc + + +include $(TEMPLATE_PATH)/Makefile.common + +$(foreach target, $(TARGETS), $(call define_target, $(target))) + +.PHONY: flash flash_mbr erase + +# Flash the program +flash: $(OUTPUT_DIRECTORY)/nrf52840_xxaa.hex + @echo Flashing: $< + nrfjprog -f nrf52 --program $< --sectorerase + nrfjprog -f nrf52 --reset + +# Flash softdevice +flash_mbr: + @echo Flashing: mbr_nrf52_2.3.0_mbr.hex + nrfjprog -f nrf52 --program $(SDK_ROOT)/components/softdevice/mbr/nrf52840/hex/mbr_nrf52_2.3.0_mbr.hex --sectorerase + nrfjprog -f nrf52 --reset + +erase: + nrfjprog -f nrf52 --eraseall + +SDK_CONFIG_FILE := ../config/sdk_config.h +CMSIS_CONFIG_TOOL := $(SDK_ROOT)/external_tools/cmsisconfig/CMSIS_Configuration_Wizard.jar +sdk_config: + java -jar $(CMSIS_CONFIG_TOOL) $(SDK_CONFIG_FILE) diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/armgcc/open_bootloader_gcc_nrf52.ld b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/armgcc/open_bootloader_gcc_nrf52.ld new file mode 100644 index 0000000..ebbb0f9 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/armgcc/open_bootloader_gcc_nrf52.ld @@ -0,0 +1,103 @@ +/* Linker script to configure memory regions. */ + +SEARCH_DIR(.) +GROUP(-lgcc -lc -lnosys) + +MEMORY +{ + FLASH (rx) : ORIGIN = 0xe0000, LENGTH = 0x1e000 + RAM (rwx) : ORIGIN = 0x20000008, LENGTH = 0x3fff8 + uicr_mbr_params_page (r) : ORIGIN = 0x10001018, LENGTH = 0x4 + mbr_params_page (r) : ORIGIN = 0x000FE000, LENGTH = 0x1000 + uicr_bootloader_start_address (r) : ORIGIN = 0x10001014, LENGTH = 0x4 + bootloader_settings_page (r) : ORIGIN = 0x000FF000, LENGTH = 0x1000 +} + +SECTIONS +{ + .uicr_mbr_params_page : + { + PROVIDE(__start_uicr_mbr_params_page = .); + KEEP(*(SORT(.uicr_mbr_params_page*))) + PROVIDE(__stop_uicr_mbr_params_page = .); + } > uicr_mbr_params_page + .mbr_params_page(NOLOAD) : + { + PROVIDE(__start_mbr_params_page = .); + KEEP(*(SORT(.mbr_params_page*))) + PROVIDE(__stop_mbr_params_page = .); + } > mbr_params_page + .uicr_bootloader_start_address : + { + PROVIDE(__start_uicr_bootloader_start_address = .); + KEEP(*(SORT(.uicr_bootloader_start_address*))) + PROVIDE(__stop_uicr_bootloader_start_address = .); + } > uicr_bootloader_start_address + .bootloader_settings_page(NOLOAD) : + { + PROVIDE(__start_bootloader_settings_page = .); + KEEP(*(SORT(.bootloader_settings_page*))) + PROVIDE(__stop_bootloader_settings_page = .); + } > bootloader_settings_page +} + +SECTIONS +{ + . = ALIGN(4); + .mem_section_dummy_ram : + { + } + .log_dynamic_data : + { + PROVIDE(__start_log_dynamic_data = .); + KEEP(*(SORT(.log_dynamic_data*))) + PROVIDE(__stop_log_dynamic_data = .); + } > RAM + .fs_data : + { + PROVIDE(__start_fs_data = .); + KEEP(*(.fs_data)) + PROVIDE(__stop_fs_data = .); + } > RAM + +} INSERT AFTER .data; + +SECTIONS +{ + .mem_section_dummy_rom : + { + } + .crypto_data : + { + PROVIDE(__start_crypto_data = .); + KEEP(*(SORT(.crypto_data*))) + PROVIDE(__stop_crypto_data = .); + } > FLASH + .nrf_queue : + { + PROVIDE(__start_nrf_queue = .); + KEEP(*(.nrf_queue)) + PROVIDE(__stop_nrf_queue = .); + } > FLASH + .log_const_data : + { + PROVIDE(__start_log_const_data = .); + KEEP(*(SORT(.log_const_data*))) + PROVIDE(__stop_log_const_data = .); + } > FLASH + .nrf_balloc : + { + PROVIDE(__start_nrf_balloc = .); + KEEP(*(.nrf_balloc)) + PROVIDE(__stop_nrf_balloc = .); + } > FLASH + .dfu_trans : + { + PROVIDE(__start_dfu_trans = .); + KEEP(*(SORT(.dfu_trans*))) + PROVIDE(__stop_dfu_trans = .); + } > FLASH + +} INSERT AFTER .text + +INCLUDE "nrf_common.ld" diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/config/sdk_config.h new file mode 100644 index 0000000..38d5cff --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/config/sdk_config.h @@ -0,0 +1,4525 @@ +/** + * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + + + +#ifndef SDK_CONFIG_H +#define SDK_CONFIG_H +// <<< Use Configuration Wizard in Context Menu >>>\n +#ifdef USE_APP_CONFIG +#include "app_config.h" +#endif +// Application + +//========================================================== +// Bootloader LEDs Configuration + +//========================================================== +// DFU_LED_CONFIG_TRANSPORT_ACTIVE_BREATH_MS - Active and Inactive period (in milliseconds) of LED breathing when DFU transport is active (e.g. BLE connected). +#ifndef DFU_LED_CONFIG_TRANSPORT_ACTIVE_BREATH_MS +#define DFU_LED_CONFIG_TRANSPORT_ACTIVE_BREATH_MS 300 +#endif + +// DFU_LED_CONFIG_TRANSPORT_INACTIVE_BREATH_MS - Active and Inactive period (in milliseconds) of LED breathing when DFU transport is inactive (e.g. BLE disconnected). +#ifndef DFU_LED_CONFIG_TRANSPORT_INACTIVE_BREATH_MS +#define DFU_LED_CONFIG_TRANSPORT_INACTIVE_BREATH_MS 600 +#endif + +// DFU_LED_CONFIG_PROGRESS_BLINK_MS - Active and Inactive period of LED blinking when DFU progress is ongoing. +#ifndef DFU_LED_CONFIG_PROGRESS_BLINK_MS +#define DFU_LED_CONFIG_PROGRESS_BLINK_MS 100 +#endif + +// +//========================================================== + +// +//========================================================== + +// nRF_Bootloader + +//========================================================== +// nrf_bootloader - Bootloader settings + +//========================================================== +// Application integrity checks + +//========================================================== +// NRF_BL_APP_CRC_CHECK_SKIPPED_ON_GPREGRET2 - Skip integrity check of the application when bit 1 (0-indexed) is set in the GPREGRET2 register. + + +#ifndef NRF_BL_APP_CRC_CHECK_SKIPPED_ON_GPREGRET2 +#define NRF_BL_APP_CRC_CHECK_SKIPPED_ON_GPREGRET2 1 +#endif + +// NRF_BL_APP_CRC_CHECK_SKIPPED_ON_SYSTEMOFF_RESET - Skip integrity check of the application when waking up from the System Off state. + + +#ifndef NRF_BL_APP_CRC_CHECK_SKIPPED_ON_SYSTEMOFF_RESET +#define NRF_BL_APP_CRC_CHECK_SKIPPED_ON_SYSTEMOFF_RESET 1 +#endif + +// +//========================================================== + +// DFU mode enter method + +//========================================================== +// NRF_BL_DFU_ENTER_METHOD_BUTTON - Enter DFU mode on button press. +//========================================================== +#ifndef NRF_BL_DFU_ENTER_METHOD_BUTTON +#define NRF_BL_DFU_ENTER_METHOD_BUTTON 0 +#endif +// NRF_BL_DFU_ENTER_METHOD_BUTTON_PIN - Button for entering DFU mode. + +// <0=> 0 (P0.0) +// <1=> 1 (P0.1) +// <2=> 2 (P0.2) +// <3=> 3 (P0.3) +// <4=> 4 (P0.4) +// <5=> 5 (P0.5) +// <6=> 6 (P0.6) +// <7=> 7 (P0.7) +// <8=> 8 (P0.8) +// <9=> 9 (P0.9) +// <10=> 10 (P0.10) +// <11=> 11 (P0.11) +// <12=> 12 (P0.12) +// <13=> 13 (P0.13) +// <14=> 14 (P0.14) +// <15=> 15 (P0.15) +// <16=> 16 (P0.16) +// <17=> 17 (P0.17) +// <18=> 18 (P0.18) +// <19=> 19 (P0.19) +// <20=> 20 (P0.20) +// <21=> 21 (P0.21) +// <22=> 22 (P0.22) +// <23=> 23 (P0.23) +// <24=> 24 (P0.24) +// <25=> 25 (P0.25) +// <26=> 26 (P0.26) +// <27=> 27 (P0.27) +// <28=> 28 (P0.28) +// <29=> 29 (P0.29) +// <30=> 30 (P0.30) +// <31=> 31 (P0.31) +// <32=> 32 (P1.0) +// <33=> 33 (P1.1) +// <34=> 34 (P1.2) +// <35=> 35 (P1.3) +// <36=> 36 (P1.4) +// <37=> 37 (P1.5) +// <38=> 38 (P1.6) +// <39=> 39 (P1.7) +// <40=> 40 (P1.8) +// <41=> 41 (P1.9) +// <42=> 42 (P1.10) +// <43=> 43 (P1.11) +// <44=> 44 (P1.12) +// <45=> 45 (P1.13) +// <46=> 46 (P1.14) +// <47=> 47 (P1.15) + +#ifndef NRF_BL_DFU_ENTER_METHOD_BUTTON_PIN +#define NRF_BL_DFU_ENTER_METHOD_BUTTON_PIN 34 +#endif + +// + +// NRF_BL_DFU_ENTER_METHOD_PINRESET - Enter DFU mode on pin reset. + + +#ifndef NRF_BL_DFU_ENTER_METHOD_PINRESET +#define NRF_BL_DFU_ENTER_METHOD_PINRESET 1 +#endif + +// NRF_BL_DFU_ENTER_METHOD_GPREGRET - Enter DFU mode when bit 1 (0-indexed) is set in the NRF_POWER_GPREGRET register. + + +#ifndef NRF_BL_DFU_ENTER_METHOD_GPREGRET +#define NRF_BL_DFU_ENTER_METHOD_GPREGRET 0 +#endif + +// NRF_BL_DFU_ENTER_METHOD_BUTTONLESS - Enter DFU mode when the Boolean enter_buttonless_dfu in DFU settings is true. + + +#ifndef NRF_BL_DFU_ENTER_METHOD_BUTTONLESS +#define NRF_BL_DFU_ENTER_METHOD_BUTTONLESS 0 +#endif + +// +//========================================================== + +// DFU timers + +//========================================================== +// NRF_BL_DFU_CONTINUATION_TIMEOUT_MS - Timeout in ms when expecting an update immediately. <100-60000000> + + +// This timeout is used after updating the SoftDevice, when there is +// already a valid application present. The bootloader will enter DFU mode +// for a short time instead of booting the old application to allow the host +// to immediately transfer a new application if it wishes. + +#ifndef NRF_BL_DFU_CONTINUATION_TIMEOUT_MS +#define NRF_BL_DFU_CONTINUATION_TIMEOUT_MS 10000 +#endif + +// NRF_BL_DFU_INACTIVITY_TIMEOUT_MS - Timeout in ms before automatically starting a valid application due to inactivity. <0-60000000> + + +// If 0, no inactivity timer will be used. Values 1-99 are invalid. + +#ifndef NRF_BL_DFU_INACTIVITY_TIMEOUT_MS +#define NRF_BL_DFU_INACTIVITY_TIMEOUT_MS 0 +#endif + +// +//========================================================== + +// Watchdog timer + +//========================================================== +// NRF_BL_WDT_MAX_SCHEDULER_LATENCY_MS - Maximum latency of the scheduler in miliseconds +// Maximum latency of the scheduler is compared with +// watchdog counter reload value (CRV). If latency is big +// enough, the watchdog will be fed from internal app_timer +// handler along with feed from user function. If latency +// is smaller than CRV, the watchdog will not be internally fed once +// it will be externally fed. Maximum latency is mainly affected +// by flash operations. + +#ifndef NRF_BL_WDT_MAX_SCHEDULER_LATENCY_MS +#define NRF_BL_WDT_MAX_SCHEDULER_LATENCY_MS 10000 +#endif + +// +//========================================================== + +// Misc Bootloader settings + +//========================================================== +// NRF_BL_FW_COPY_PROGRESS_STORE_STEP - Number of pages copied after which progress in the settings page is updated. +// Progress stored in the settings page allows the bootloader to resume +// copying the new firmware in case of interruption (reset). +// If the value is small, then the resume point is more accurate. However, +// it also impacts negatively on flash wear. + +#ifndef NRF_BL_FW_COPY_PROGRESS_STORE_STEP +#define NRF_BL_FW_COPY_PROGRESS_STORE_STEP 8 +#endif + +// NRF_BL_SETTINGS_PAGE_PROTECT - Write-protect the settings page before starting the application. + + +// The settings page may be used to exchange information between the bootloader and the application. +// In that case it should not be protected. + +#ifndef NRF_BL_SETTINGS_PAGE_PROTECT +#define NRF_BL_SETTINGS_PAGE_PROTECT 1 +#endif + +// +//========================================================== + +// +//========================================================== + +// +//========================================================== + +// nRF_Crypto + +//========================================================== +// NRF_CRYPTO_ENABLED - nrf_crypto - Cryptography library +//========================================================== +#ifndef NRF_CRYPTO_ENABLED +#define NRF_CRYPTO_ENABLED 1 +#endif +// NRF_CRYPTO_ALLOCATOR - Memory allocator + + +// Choose memory allocator used by nrf_crypto. Default is alloca if possible or nrf_malloc otherwise. If 'User macros' are selected then user have to create 'nrf_crypto_allocator.h' file containing NRF_CRYPTO_ALLOC, NRF_CRYPTO_FREE and NRF_CRYPTO_ALLOC_ON_STACK +// <0=> Default +// <1=> User macros +// <2=> On stack (alloca) +// <3=> C dynamic memory (malloc) +// <4=> SDK Memory Manager (nrf_malloc) + +#ifndef NRF_CRYPTO_ALLOCATOR +#define NRF_CRYPTO_ALLOCATOR 0 +#endif + +// NRF_CRYPTO_BACKEND_CC310_BL_ENABLED - Enable the ARM Cryptocell CC310 reduced backend. + +// The CC310 hardware-accelerated cryptography backend with reduced functionality and footprint (only available on nRF52840). +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_BL_ENABLED 1 +#endif +// NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP224R1_ENABLED - Enable the secp224r1 elliptic curve support using CC310_BL. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP224R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP224R1_ENABLED 0 +#endif + +// NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP256R1_ENABLED - Enable the secp256r1 elliptic curve support using CC310_BL. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP256R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP256R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_BL_HASH_SHA256_ENABLED - CC310_BL SHA-256 hash functionality. + + +// CC310_BL backend implementation for hardware-accelerated SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_HASH_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_BL_HASH_SHA256_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_BL_HASH_LITTLE_ENDIAN_DIGEST_ENABLED - nrf_cc310_bl hash outputs digests in little endian + + +// Makes the nRF SH hash functions output digests in little endian format. Only for use in nRF SDK DFU! + +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_HASH_LITTLE_ENDIAN_DIGEST_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_BL_HASH_LITTLE_ENDIAN_DIGEST_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_ENABLED - nrf_cc310_bl buffers to RAM before running hash operation + + +// Enabling this makes hashing of addresses in FLASH range possible. Size of buffer allocated for hashing is set by NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE + +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE - nrf_cc310_bl hash outputs digests in little endian +// Makes the nrf_cc310_bl hash functions output digests in little endian format. Only for use in nRF SDK DFU! + +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE +#define NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE 4096 +#endif + +// NRF_CRYPTO_BACKEND_CC310_BL_ECC_LITTLE_ENDIAN_ENABLED - Enable non-standard little endian byte order in nrf_cc310_bl ECC functions. + + +// This affects parameters for all nrf_cc310_bl ECC APIs (raw keys, signature, digest). Only for use in nRF SDK DFU! + +#ifndef NRF_CRYPTO_BACKEND_CC310_BL_ECC_LITTLE_ENDIAN_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_BL_ECC_LITTLE_ENDIAN_ENABLED 1 +#endif + +// + +// NRF_CRYPTO_BACKEND_CC310_ENABLED - Enable the ARM Cryptocell CC310 backend. + +// The CC310 hardware-accelerated cryptography backend (only available on nRF52840). +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_CC310_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ENABLED 0 +#endif +// NRF_CRYPTO_BACKEND_CC310_AES_CBC_ENABLED - Enable the AES CBC mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CBC_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_AES_CBC_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_AES_CTR_ENABLED - Enable the AES CTR mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CTR_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_AES_CTR_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_AES_ECB_ENABLED - Enable the AES ECB mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_AES_ECB_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_AES_ECB_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_AES_CBC_MAC_ENABLED - Enable the AES CBC_MAC mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CBC_MAC_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_AES_CBC_MAC_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_AES_CMAC_ENABLED - Enable the AES CMAC mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CMAC_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_AES_CMAC_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_AES_CCM_ENABLED - Enable the AES CCM mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CCM_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_AES_CCM_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_AES_CCM_STAR_ENABLED - Enable the AES CCM* mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CCM_STAR_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_AES_CCM_STAR_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_CHACHA_POLY_ENABLED - Enable the CHACHA-POLY mode using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_CHACHA_POLY_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_CHACHA_POLY_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R1_ENABLED - Enable the secp160r1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R2_ENABLED - Enable the secp160r2 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R2_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R2_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP192R1_ENABLED - Enable the secp192r1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP192R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP192R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP224R1_ENABLED - Enable the secp224r1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP224R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP224R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP256R1_ENABLED - Enable the secp256r1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP256R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP256R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP384R1_ENABLED - Enable the secp384r1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP384R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP384R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP521R1_ENABLED - Enable the secp521r1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP521R1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP521R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP160K1_ENABLED - Enable the secp160k1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP160K1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP160K1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP192K1_ENABLED - Enable the secp192k1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP192K1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP192K1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP224K1_ENABLED - Enable the secp224k1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP224K1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP224K1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_ECC_SECP256K1_ENABLED - Enable the secp256k1 elliptic curve support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP256K1_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP256K1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_HASH_SHA256_ENABLED - CC310 SHA-256 hash functionality. + + +// CC310 backend implementation for hardware-accelerated SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_CC310_HASH_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_HASH_SHA256_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_HASH_SHA512_ENABLED - CC310 SHA-512 hash functionality + + +// CC310 backend implementation for SHA-512 (in software). + +#ifndef NRF_CRYPTO_BACKEND_CC310_HASH_SHA512_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_HASH_SHA512_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_HMAC_SHA256_ENABLED - CC310 HMAC using SHA-256 + + +// CC310 backend implementation for HMAC using hardware-accelerated SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_CC310_HMAC_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_HMAC_SHA256_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_HMAC_SHA512_ENABLED - CC310 HMAC using SHA-512 + + +// CC310 backend implementation for HMAC using SHA-512 (in software). + +#ifndef NRF_CRYPTO_BACKEND_CC310_HMAC_SHA512_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_HMAC_SHA512_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_CC310_RNG_ENABLED - Enable RNG support using CC310. + + +#ifndef NRF_CRYPTO_BACKEND_CC310_RNG_ENABLED +#define NRF_CRYPTO_BACKEND_CC310_RNG_ENABLED 1 +#endif + +// + +// NRF_CRYPTO_BACKEND_CIFRA_ENABLED - Enable the Cifra backend. +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_CIFRA_ENABLED +#define NRF_CRYPTO_BACKEND_CIFRA_ENABLED 0 +#endif +// NRF_CRYPTO_BACKEND_CIFRA_AES_EAX_ENABLED - Enable the AES EAX mode using Cifra. + + +#ifndef NRF_CRYPTO_BACKEND_CIFRA_AES_EAX_ENABLED +#define NRF_CRYPTO_BACKEND_CIFRA_AES_EAX_ENABLED 1 +#endif + +// + +// NRF_CRYPTO_BACKEND_MBEDTLS_ENABLED - Enable the mbed TLS backend. +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ENABLED 0 +#endif +// NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_ENABLED - Enable the AES CBC mode mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_AES_CTR_ENABLED - Enable the AES CTR mode using mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CTR_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CTR_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_AES_CFB_ENABLED - Enable the AES CFB mode using mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CFB_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CFB_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_AES_ECB_ENABLED - Enable the AES ECB mode using mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_ECB_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_ECB_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_MAC_ENABLED - Enable the AES CBC MAC mode using mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_MAC_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_MAC_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_AES_CMAC_ENABLED - Enable the AES CMAC mode using mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CMAC_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CMAC_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_AES_CCM_ENABLED - Enable the AES CCM mode using mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CCM_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CCM_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_AES_GCM_ENABLED - Enable the AES GCM mode using mbed TLS. + + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_GCM_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_GCM_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192R1_ENABLED - Enable secp192r1 (NIST 192-bit) curve + + +// Enable this setting if you need secp192r1 (NIST 192-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224R1_ENABLED - Enable secp224r1 (NIST 224-bit) curve + + +// Enable this setting if you need secp224r1 (NIST 224-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256R1_ENABLED - Enable secp256r1 (NIST 256-bit) curve + + +// Enable this setting if you need secp256r1 (NIST 256-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP384R1_ENABLED - Enable secp384r1 (NIST 384-bit) curve + + +// Enable this setting if you need secp384r1 (NIST 384-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP384R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP384R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP521R1_ENABLED - Enable secp521r1 (NIST 521-bit) curve + + +// Enable this setting if you need secp521r1 (NIST 521-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP521R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP521R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192K1_ENABLED - Enable secp192k1 (Koblitz 192-bit) curve + + +// Enable this setting if you need secp192k1 (Koblitz 192-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192K1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192K1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224K1_ENABLED - Enable secp224k1 (Koblitz 224-bit) curve + + +// Enable this setting if you need secp224k1 (Koblitz 224-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224K1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224K1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256K1_ENABLED - Enable secp256k1 (Koblitz 256-bit) curve + + +// Enable this setting if you need secp256k1 (Koblitz 256-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256K1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256K1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP256R1_ENABLED - Enable bp256r1 (Brainpool 256-bit) curve + + +// Enable this setting if you need bp256r1 (Brainpool 256-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP256R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP256R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP384R1_ENABLED - Enable bp384r1 (Brainpool 384-bit) curve + + +// Enable this setting if you need bp384r1 (Brainpool 384-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP384R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP384R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP512R1_ENABLED - Enable bp512r1 (Brainpool 512-bit) curve + + +// Enable this setting if you need bp512r1 (Brainpool 512-bit) support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP512R1_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP512R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_ECC_CURVE25519_ENABLED - Enable Curve25519 curve + + +// Enable this setting if you need Curve25519 support using MBEDTLS + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_CURVE25519_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_CURVE25519_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA256_ENABLED - Enable mbed TLS SHA-256 hash functionality. + + +// mbed TLS backend implementation for SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA256_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA512_ENABLED - Enable mbed TLS SHA-512 hash functionality. + + +// mbed TLS backend implementation for SHA-512. + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA512_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA512_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA256_ENABLED - Enable mbed TLS HMAC using SHA-256. + + +// mbed TLS backend implementation for HMAC using SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA256_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA512_ENABLED - Enable mbed TLS HMAC using SHA-512. + + +// mbed TLS backend implementation for HMAC using SHA-512. + +#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA512_ENABLED +#define NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA512_ENABLED 1 +#endif + +// + +// NRF_CRYPTO_BACKEND_MICRO_ECC_ENABLED - Enable the micro-ecc backend. +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ENABLED +#define NRF_CRYPTO_BACKEND_MICRO_ECC_ENABLED 0 +#endif +// NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP192R1_ENABLED - Enable secp192r1 (NIST 192-bit) curve + + +// Enable this setting if you need secp192r1 (NIST 192-bit) support using micro-ecc + +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP192R1_ENABLED +#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP192R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP224R1_ENABLED - Enable secp224r1 (NIST 224-bit) curve + + +// Enable this setting if you need secp224r1 (NIST 224-bit) support using micro-ecc + +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP224R1_ENABLED +#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP224R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256R1_ENABLED - Enable secp256r1 (NIST 256-bit) curve + + +// Enable this setting if you need secp256r1 (NIST 256-bit) support using micro-ecc + +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256R1_ENABLED +#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256K1_ENABLED - Enable secp256k1 (Koblitz 256-bit) curve + + +// Enable this setting if you need secp256k1 (Koblitz 256-bit) support using micro-ecc + +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256K1_ENABLED +#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256K1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_MICRO_ECC_PUBLIC_KEY_TRUSTED_ENABLED - Always trust raw public key (it will cause a security issue if the public key comes from an untrusted source) + + +// Enable this setting if you want to reduce flash usage. Only for use in nRF SDK DFU! Never enable it if the raw public key comes from an untrusted source. + +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_PUBLIC_KEY_TRUSTED_ENABLED +#define NRF_CRYPTO_BACKEND_MICRO_ECC_PUBLIC_KEY_TRUSTED_ENABLED 0 +#endif + +// NRF_CRYPTO_BACKEND_MICRO_ECC_LITTLE_ENDIAN_ENABLED - Enable non-standard little endian byte order. + + +// This affects parameters for all ECC API (raw keys, signature, digest, shared secret). Only for use in nRF SDK DFU! + +#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_LITTLE_ENDIAN_ENABLED +#define NRF_CRYPTO_BACKEND_MICRO_ECC_LITTLE_ENDIAN_ENABLED 0 +#endif + +// + +// NRF_CRYPTO_BACKEND_NRF_HW_RNG_ENABLED - Enable the nRF HW RNG backend. + +// The nRF HW backend provide access to RNG peripheral in nRF5x devices. +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_NRF_HW_RNG_ENABLED +#define NRF_CRYPTO_BACKEND_NRF_HW_RNG_ENABLED 0 +#endif +// NRF_CRYPTO_BACKEND_NRF_HW_RNG_MBEDTLS_CTR_DRBG_ENABLED - Enable mbed TLS CTR-DRBG algorithm. + + +// Enable mbed TLS CTR-DRBG standardized by NIST (NIST SP 800-90A Rev. 1). The nRF HW RNG is used as an entropy source for seeding. + +#ifndef NRF_CRYPTO_BACKEND_NRF_HW_RNG_MBEDTLS_CTR_DRBG_ENABLED +#define NRF_CRYPTO_BACKEND_NRF_HW_RNG_MBEDTLS_CTR_DRBG_ENABLED 1 +#endif + +// + +// NRF_CRYPTO_BACKEND_NRF_SW_ENABLED - Enable the legacy nRFx sw for crypto. + +// The nRF SW cryptography backend (only used in bootloader context). +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_NRF_SW_ENABLED +#define NRF_CRYPTO_BACKEND_NRF_SW_ENABLED 0 +#endif +// NRF_CRYPTO_BACKEND_NRF_SW_HASH_SHA256_ENABLED - nRF SW hash backend support for SHA-256 + + +// The nRF SW backend provide access to nRF SDK legacy hash implementation of SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_NRF_SW_HASH_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_NRF_SW_HASH_SHA256_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_NRF_SW_HASH_LITTLE_ENDIAN_DIGEST_ENABLED - nRF SW hash outputs digests in little endian + + +// Makes the nRF SH hash functions output digests in little endian format. Only for use in nRF SDK DFU! + +#ifndef NRF_CRYPTO_BACKEND_NRF_SW_HASH_LITTLE_ENDIAN_DIGEST_ENABLED +#define NRF_CRYPTO_BACKEND_NRF_SW_HASH_LITTLE_ENDIAN_DIGEST_ENABLED 1 +#endif + +// + +// NRF_CRYPTO_BACKEND_OBERON_ENABLED - Enable the Oberon backend + +// The Oberon backend +//========================================================== +#ifndef NRF_CRYPTO_BACKEND_OBERON_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_ENABLED 0 +#endif +// NRF_CRYPTO_BACKEND_OBERON_CHACHA_POLY_ENABLED - Enable the CHACHA-POLY mode using Oberon. + + +#ifndef NRF_CRYPTO_BACKEND_OBERON_CHACHA_POLY_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_CHACHA_POLY_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_OBERON_ECC_SECP256R1_ENABLED - Enable secp256r1 curve + + +// Enable this setting if you need secp256r1 curve support using Oberon library + +#ifndef NRF_CRYPTO_BACKEND_OBERON_ECC_SECP256R1_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_ECC_SECP256R1_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_OBERON_ECC_CURVE25519_ENABLED - Enable Curve25519 ECDH + + +// Enable this setting if you need Curve25519 ECDH support using Oberon library + +#ifndef NRF_CRYPTO_BACKEND_OBERON_ECC_CURVE25519_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_ECC_CURVE25519_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_OBERON_ECC_ED25519_ENABLED - Enable Ed25519 signature scheme + + +// Enable this setting if you need Ed25519 support using Oberon library + +#ifndef NRF_CRYPTO_BACKEND_OBERON_ECC_ED25519_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_ECC_ED25519_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_OBERON_HASH_SHA256_ENABLED - Oberon SHA-256 hash functionality + + +// Oberon backend implementation for SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_OBERON_HASH_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_HASH_SHA256_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_OBERON_HASH_SHA512_ENABLED - Oberon SHA-512 hash functionality + + +// Oberon backend implementation for SHA-512. + +#ifndef NRF_CRYPTO_BACKEND_OBERON_HASH_SHA512_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_HASH_SHA512_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA256_ENABLED - Oberon HMAC using SHA-256 + + +// Oberon backend implementation for HMAC using SHA-256. + +#ifndef NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA256_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA256_ENABLED 1 +#endif + +// NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA512_ENABLED - Oberon HMAC using SHA-512 + + +// Oberon backend implementation for HMAC using SHA-512. + +#ifndef NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA512_ENABLED +#define NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA512_ENABLED 1 +#endif + +// + +// + +// nrf_crypto_rng - RNG Configuration + +//========================================================== +// NRF_CRYPTO_RNG_STATIC_MEMORY_BUFFERS_ENABLED - Use static memory buffers for context and temporary init buffer. + + +// Always recommended when using the nRF HW RNG as the context and temporary buffers are small. Consider disabling if using the CC310 RNG in a RAM constrained application. In this case, memory must be provided to nrf_crypto_rng_init, or it can be allocated internally provided that NRF_CRYPTO_ALLOCATOR does not allocate memory on the stack. + +#ifndef NRF_CRYPTO_RNG_STATIC_MEMORY_BUFFERS_ENABLED +#define NRF_CRYPTO_RNG_STATIC_MEMORY_BUFFERS_ENABLED 1 +#endif + +// NRF_CRYPTO_RNG_AUTO_INIT_ENABLED - Initialize the RNG module automatically when nrf_crypto is initialized. + + +// Automatic initialization is only supported with static or internally allocated context and temporary memory. + +#ifndef NRF_CRYPTO_RNG_AUTO_INIT_ENABLED +#define NRF_CRYPTO_RNG_AUTO_INIT_ENABLED 1 +#endif + +// +//========================================================== + +// +//========================================================== + +// nRF_DFU + +//========================================================== +// nrf_dfu - Device Firmware Upgrade + +//========================================================== +// DFU transport + +//========================================================== +// NRF_DFU_TRANSPORT_BLE - BLE transport settings +//========================================================== +#ifndef NRF_DFU_TRANSPORT_BLE +#define NRF_DFU_TRANSPORT_BLE 0 +#endif +// NRF_DFU_BLE_ADV_NAME - Default advertising name. +#ifndef NRF_DFU_BLE_ADV_NAME +#define NRF_DFU_BLE_ADV_NAME "DfuTarg" +#endif + +// BLE DFU security + +//========================================================== +// NRF_DFU_BLE_REQUIRES_BONDS - Require bond with peer. + + +#ifndef NRF_DFU_BLE_REQUIRES_BONDS +#define NRF_DFU_BLE_REQUIRES_BONDS 0 +#endif + +// +//========================================================== + +// BLE DFU connection + +//========================================================== +// NRF_DFU_BLE_MIN_CONN_INTERVAL - Minimum connection interval (units). +// Minimum GAP connection interval, in 1.25 ms units. + +#ifndef NRF_DFU_BLE_MIN_CONN_INTERVAL +#define NRF_DFU_BLE_MIN_CONN_INTERVAL 12 +#endif + +// NRF_DFU_BLE_MAX_CONN_INTERVAL - Maximum connection interval (units). +// Maximum GAP connection interval, in 1.25 ms units. + +#ifndef NRF_DFU_BLE_MAX_CONN_INTERVAL +#define NRF_DFU_BLE_MAX_CONN_INTERVAL 12 +#endif + +// NRF_DFU_BLE_CONN_SUP_TIMEOUT_MS - Supervision timeout (ms). +// GAP connection supervision timeout, in milliseconds. + +#ifndef NRF_DFU_BLE_CONN_SUP_TIMEOUT_MS +#define NRF_DFU_BLE_CONN_SUP_TIMEOUT_MS 6000 +#endif + +// +//========================================================== + +// BLE DFU buffers + +//========================================================== +// NRF_DFU_BLE_BUFFERS_OVERRIDE + +// Check this option to override the default number of buffers. +//========================================================== +#ifndef NRF_DFU_BLE_BUFFERS_OVERRIDE +#define NRF_DFU_BLE_BUFFERS_OVERRIDE 0 +#endif +// NRF_DFU_BLE_BUFFERS - Number of buffers in the BLE transport. +// Number of buffers to store incoming data while it is being written to flash. +// Reduce this value to save RAM. If this value is too low, the DFU process will fail. + +#ifndef NRF_DFU_BLE_BUFFERS +#define NRF_DFU_BLE_BUFFERS 8 +#endif + +// + +// +//========================================================== + +// + +// +//========================================================== + +// DFU protocol + +//========================================================== +// NRF_DFU_PROTOCOL_FW_VERSION_MSG - Firmware version message support. + + +// Firmware version message support. +// If disabled, firmware version requests will return NRF_DFU_RES_CODE_OP_CODE_NOT_SUPPORTED. + +#ifndef NRF_DFU_PROTOCOL_FW_VERSION_MSG +#define NRF_DFU_PROTOCOL_FW_VERSION_MSG 1 +#endif + +// NRF_DFU_PROTOCOL_VERSION_MSG - Protocol version message support. + + +// Protocol version message support. +// If disabled, protocol version requests will return NRF_DFU_RES_CODE_OP_CODE_NOT_SUPPORTED. + +#ifndef NRF_DFU_PROTOCOL_VERSION_MSG +#define NRF_DFU_PROTOCOL_VERSION_MSG 1 +#endif + +// +//========================================================== + +// DFU security + +//========================================================== +// NRF_DFU_APP_DOWNGRADE_PREVENTION - Check the firmware version and SoftDevice requirements of application (and SoftDevice) updates. + + +// Whether to check the incoming version against the version of the existing app and/or +// the incoming SoftDevice requirements against the existing SoftDevice. +// This applies to application updates, and possibly to SoftDevice updates. +// Disabling this causes the checks to always ignore the incoming firmware version and +// to ignore the SoftDevice requirements if the first requirement is 0. +// This does not apply the bootloader updates. If the bootloader depends on the SoftDevice +// e.g. for BLE transport, this does not apply to SoftDevice updates. +// See @ref lib_bootloader_dfu_validation for more information. +// When signed updates are required, version checking should always be enabled. + +#ifndef NRF_DFU_APP_DOWNGRADE_PREVENTION +#define NRF_DFU_APP_DOWNGRADE_PREVENTION 0 +#endif + +// NRF_DFU_FORCE_DUAL_BANK_APP_UPDATES - Accept only dual-bank application updates. + + +// If not enabled then if there is not enough space to perform dual-bank update +// application is deleted and single-bank update is performed. In case it is considered +// security concern user can prefer to discard update request rather than overwrite +// current application. + +#ifndef NRF_DFU_FORCE_DUAL_BANK_APP_UPDATES +#define NRF_DFU_FORCE_DUAL_BANK_APP_UPDATES 0 +#endif + +// NRF_DFU_HW_VERSION - Device hardware version. +// This is used to determine if given update is targeting the device. +// It is checked against the hw_version value in the init packet + +#ifndef NRF_DFU_HW_VERSION +#define NRF_DFU_HW_VERSION 52 +#endif + +// NRF_DFU_REQUIRE_SIGNED_APP_UPDATE - Require a valid signature to update the application or SoftDevice. + + +#ifndef NRF_DFU_REQUIRE_SIGNED_APP_UPDATE +#define NRF_DFU_REQUIRE_SIGNED_APP_UPDATE 0 +#endif + +// NRF_DFU_SINGLE_BANK_APP_UPDATES - Place the application and the SoftDevice directly where they are supposed to be. + + +// Note that this creates security concerns when signing and version checks +// are enabled. An attacker will be able to delete (but not replace) +// the current app or SoftDevice without knowing the signature key. + +#ifndef NRF_DFU_SINGLE_BANK_APP_UPDATES +#define NRF_DFU_SINGLE_BANK_APP_UPDATES 1 +#endif + +// +//========================================================== + +// Misc DFU settings + +//========================================================== +// NRF_DFU_SAVE_PROGRESS_IN_FLASH - Save DFU progress in flash. + + +// Save DFU progress to flash so that it can be resumed if interrupted, instead of being restarted. +// Keep this setting disabled to maximize transfer speed and minimize flash wear. +// The init packet is always saved in flash, regardless of this setting. + +#ifndef NRF_DFU_SAVE_PROGRESS_IN_FLASH +#define NRF_DFU_SAVE_PROGRESS_IN_FLASH 0 +#endif + +// +//========================================================== + +// +//========================================================== + +// +//========================================================== + +// nRF_Drivers + +//========================================================== +// CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver - legacy layer +//========================================================== +#ifndef CLOCK_ENABLED +#define CLOCK_ENABLED 1 +#endif +// CLOCK_CONFIG_LF_SRC - LF Clock Source + +// <0=> RC +// <1=> XTAL +// <2=> Synth + +#ifndef CLOCK_CONFIG_LF_SRC +#define CLOCK_CONFIG_LF_SRC 1 +#endif + +// CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef CLOCK_CONFIG_IRQ_PRIORITY +#define CLOCK_CONFIG_IRQ_PRIORITY 7 +#endif + +// + +// NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver +//========================================================== +#ifndef NRFX_CLOCK_ENABLED +#define NRFX_CLOCK_ENABLED 1 +#endif +// NRFX_CLOCK_CONFIG_LF_SRC - LF Clock Source + +// <0=> RC +// <1=> XTAL +// <2=> Synth + +#ifndef NRFX_CLOCK_CONFIG_LF_SRC +#define NRFX_CLOCK_CONFIG_LF_SRC 1 +#endif + +// NRFX_CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY +#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED +#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_CLOCK_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL +#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR +#define NRFX_CLOCK_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR +#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver +//========================================================== +#ifndef NRFX_POWER_ENABLED +#define NRFX_POWER_ENABLED 1 +#endif +// NRFX_POWER_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_POWER_CONFIG_IRQ_PRIORITY +#define NRFX_POWER_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_POWER_CONFIG_DEFAULT_DCDCEN - The default configuration of main DCDC regulator + + +// This settings means only that components for DCDC regulator are installed and it can be enabled. + +#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCEN +#define NRFX_POWER_CONFIG_DEFAULT_DCDCEN 0 +#endif + +// NRFX_POWER_CONFIG_DEFAULT_DCDCENHV - The default configuration of High Voltage DCDC regulator + + +// This settings means only that components for DCDC regulator are installed and it can be enabled. + +#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCENHV +#define NRFX_POWER_CONFIG_DEFAULT_DCDCENHV 0 +#endif + +// + +// POWER_ENABLED - nrf_drv_power - POWER peripheral driver - legacy layer +//========================================================== +#ifndef POWER_ENABLED +#define POWER_ENABLED 1 +#endif +// POWER_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef POWER_CONFIG_IRQ_PRIORITY +#define POWER_CONFIG_IRQ_PRIORITY 7 +#endif + +// POWER_CONFIG_DEFAULT_DCDCEN - The default configuration of main DCDC regulator + + +// This settings means only that components for DCDC regulator are installed and it can be enabled. + +#ifndef POWER_CONFIG_DEFAULT_DCDCEN +#define POWER_CONFIG_DEFAULT_DCDCEN 0 +#endif + +// POWER_CONFIG_DEFAULT_DCDCENHV - The default configuration of High Voltage DCDC regulator + + +// This settings means only that components for DCDC regulator are installed and it can be enabled. + +#ifndef POWER_CONFIG_DEFAULT_DCDCENHV +#define POWER_CONFIG_DEFAULT_DCDCENHV 0 +#endif + +// + +// USBD_ENABLED - nrf_drv_usbd - USB driver +//========================================================== +#ifndef USBD_ENABLED +#define USBD_ENABLED 1 +#endif +// USBD_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef USBD_CONFIG_IRQ_PRIORITY +#define USBD_CONFIG_IRQ_PRIORITY 7 +#endif + +// USBD_CONFIG_DMASCHEDULER_MODE - USBD SMA scheduler working scheme + +// <0=> Prioritized access +// <1=> Round Robin + +#ifndef USBD_CONFIG_DMASCHEDULER_MODE +#define USBD_CONFIG_DMASCHEDULER_MODE 0 +#endif + +// + +// +//========================================================== + +// nRF_Libraries + +//========================================================== +// APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler +//========================================================== +#ifndef APP_SCHEDULER_ENABLED +#define APP_SCHEDULER_ENABLED 1 +#endif +// APP_SCHEDULER_WITH_PAUSE - Enabling pause feature + + +#ifndef APP_SCHEDULER_WITH_PAUSE +#define APP_SCHEDULER_WITH_PAUSE 0 +#endif + +// APP_SCHEDULER_WITH_PROFILER - Enabling scheduler profiling + + +#ifndef APP_SCHEDULER_WITH_PROFILER +#define APP_SCHEDULER_WITH_PROFILER 0 +#endif + +// + +// APP_TIMER_ENABLED - app_timer - Application timer functionality +//========================================================== +#ifndef APP_TIMER_ENABLED +#define APP_TIMER_ENABLED 1 +#endif +// APP_TIMER_CONFIG_RTC_FREQUENCY - Configure RTC prescaler. + +// <0=> 32768 Hz +// <1=> 16384 Hz +// <3=> 8192 Hz +// <7=> 4096 Hz +// <15=> 2048 Hz +// <31=> 1024 Hz + +#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY +#define APP_TIMER_CONFIG_RTC_FREQUENCY 0 +#endif + +// APP_TIMER_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY +#define APP_TIMER_CONFIG_IRQ_PRIORITY 7 +#endif + +// APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. +// Size of the queue depends on how many timers are used +// in the system, how often timers are started and overall +// system latency. If queue size is too small app_timer calls +// will fail. + +#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE +#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10 +#endif + +// APP_TIMER_CONFIG_USE_SCHEDULER - Enable scheduling app_timer events to app_scheduler + + +#ifndef APP_TIMER_CONFIG_USE_SCHEDULER +#define APP_TIMER_CONFIG_USE_SCHEDULER 1 +#endif + +// APP_TIMER_KEEPS_RTC_ACTIVE - Enable RTC always on + + +// If option is enabled RTC is kept running even if there is no active timers. +// This option can be used when app_timer is used for timestamping. + +#ifndef APP_TIMER_KEEPS_RTC_ACTIVE +#define APP_TIMER_KEEPS_RTC_ACTIVE 0 +#endif + +// App Timer Legacy configuration - Legacy configuration. + +//========================================================== +// APP_TIMER_WITH_PROFILER - Enable app_timer profiling + + +#ifndef APP_TIMER_WITH_PROFILER +#define APP_TIMER_WITH_PROFILER 0 +#endif + +// APP_TIMER_CONFIG_SWI_NUMBER - Configure SWI instance used. + + +#ifndef APP_TIMER_CONFIG_SWI_NUMBER +#define APP_TIMER_CONFIG_SWI_NUMBER 0 +#endif + +// +//========================================================== + +// + +// APP_USBD_CDC_ACM_ENABLED - app_usbd_cdc_acm - USB CDC ACM class + + +#ifndef APP_USBD_CDC_ACM_ENABLED +#define APP_USBD_CDC_ACM_ENABLED 1 +#endif + +// APP_USBD_ENABLED - app_usbd - USB Device library +//========================================================== +#ifndef APP_USBD_ENABLED +#define APP_USBD_ENABLED 1 +#endif +// APP_USBD_VID - Vendor ID + +// Vendor ID ordered from USB IF: http://www.usb.org/developers/vendor/ +#ifndef APP_USBD_VID +#define APP_USBD_VID 0x1915 +#endif + +// APP_USBD_PID - Product ID + +// Selected Product ID +#ifndef APP_USBD_PID +#define APP_USBD_PID 0x521F +#endif + +// APP_USBD_DEVICE_VER_MAJOR - Device version, major part <0-99> + + +// Device version, will be converted automatically to BCD notation. Use just decimal values. + +#ifndef APP_USBD_DEVICE_VER_MAJOR +#define APP_USBD_DEVICE_VER_MAJOR 1 +#endif + +// APP_USBD_DEVICE_VER_MINOR - Device version, minor part <0-99> + + +// Device version, will be converted automatically to BCD notation. Use just decimal values. + +#ifndef APP_USBD_DEVICE_VER_MINOR +#define APP_USBD_DEVICE_VER_MINOR 0 +#endif + +// APP_USBD_CONFIG_SELF_POWERED - Self powered + + +#ifndef APP_USBD_CONFIG_SELF_POWERED +#define APP_USBD_CONFIG_SELF_POWERED 1 +#endif + +// APP_USBD_CONFIG_MAX_POWER - MaxPower field in configuration descriptor in milliamps <0-500> + + +#ifndef APP_USBD_CONFIG_MAX_POWER +#define APP_USBD_CONFIG_MAX_POWER 500 +#endif + +// APP_USBD_CONFIG_POWER_EVENTS_PROCESS - Process power events + + +// Enable processing power events in USB event handler. + +#ifndef APP_USBD_CONFIG_POWER_EVENTS_PROCESS +#define APP_USBD_CONFIG_POWER_EVENTS_PROCESS 1 +#endif + +// APP_USBD_CONFIG_EVENT_QUEUE_ENABLE - Enable event queue + +// This is the default configuration when all the events are placed into internal queue. +// Disable it when external queue is used like app_scheduler or if you wish to process all events inside interrupts. +// Processing all events from the interrupt level adds requirement not to call any functions that modifies the USBD library state from the context higher than USB interrupt context. +// Functions that modify USBD state are functions for sleep, wakeup, start, stop, enable and disable. +//========================================================== +#ifndef APP_USBD_CONFIG_EVENT_QUEUE_ENABLE +#define APP_USBD_CONFIG_EVENT_QUEUE_ENABLE 0 +#endif +// APP_USBD_CONFIG_EVENT_QUEUE_SIZE - The size of event queue <16-64> + + +// The size of the queue for the events that would be processed in the main loop. + +#ifndef APP_USBD_CONFIG_EVENT_QUEUE_SIZE +#define APP_USBD_CONFIG_EVENT_QUEUE_SIZE 32 +#endif + +// APP_USBD_CONFIG_SOF_HANDLING_MODE - Change SOF events handling mode. + + +// Normal queue - SOF events are pushed normally into event queue. +// Compress queue - SOF events are counted and binded with other events or executed when queue is empty. +// This prevents queue from filling with SOF events. +// Interrupt - SOF events are processed in interrupt. +// <0=> Normal queue +// <1=> Compress queue +// <2=> Interrupt + +#ifndef APP_USBD_CONFIG_SOF_HANDLING_MODE +#define APP_USBD_CONFIG_SOF_HANDLING_MODE 1 +#endif + +// + +// APP_USBD_CONFIG_SOF_TIMESTAMP_PROVIDE - Provide a function that generates timestamps for logs based on the current SOF + + +// The function app_usbd_sof_timestamp_get will be implemented if the logger is enabled. +// Use it when initializing the logger. +// SOF processing will be always enabled when this configuration parameter is active. +// Notice that this option is configured outside of APP_USBD_CONFIG_LOG_ENABLED. +// This means that it will work even if the logging in this very module is disabled. + +#ifndef APP_USBD_CONFIG_SOF_TIMESTAMP_PROVIDE +#define APP_USBD_CONFIG_SOF_TIMESTAMP_PROVIDE 0 +#endif + +// APP_USBD_CONFIG_LOG_ENABLED - Enable logging in the module +//========================================================== +#ifndef APP_USBD_CONFIG_LOG_ENABLED +#define APP_USBD_CONFIG_LOG_ENABLED 0 +#endif +// APP_USBD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_CONFIG_LOG_LEVEL +#define APP_USBD_CONFIG_LOG_LEVEL 3 +#endif + +// APP_USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CONFIG_INFO_COLOR +#define APP_USBD_CONFIG_INFO_COLOR 0 +#endif + +// APP_USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CONFIG_DEBUG_COLOR +#define APP_USBD_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// CRC32_ENABLED - crc32 - CRC32 calculation routines + + +#ifndef CRC32_ENABLED +#define CRC32_ENABLED 1 +#endif + +// LED_SOFTBLINK_ENABLED - led_softblink - led_softblink module + + +#ifndef LED_SOFTBLINK_ENABLED +#define LED_SOFTBLINK_ENABLED 1 +#endif + +// LOW_POWER_PWM_ENABLED - low_power_pwm - low_power_pwm module + + +#ifndef LOW_POWER_PWM_ENABLED +#define LOW_POWER_PWM_ENABLED 1 +#endif + +// MEM_MANAGER_ENABLED - mem_manager - Dynamic memory allocator +//========================================================== +#ifndef MEM_MANAGER_ENABLED +#define MEM_MANAGER_ENABLED 1 +#endif +// MEMORY_MANAGER_SMALL_BLOCK_COUNT - Size of each memory blocks identified as 'small' block. <0-255> + + +#ifndef MEMORY_MANAGER_SMALL_BLOCK_COUNT +#define MEMORY_MANAGER_SMALL_BLOCK_COUNT 1 +#endif + +// MEMORY_MANAGER_SMALL_BLOCK_SIZE - Size of each memory blocks identified as 'small' block. +// Size of each memory blocks identified as 'small' block. Memory block are recommended to be word-sized. + +#ifndef MEMORY_MANAGER_SMALL_BLOCK_SIZE +#define MEMORY_MANAGER_SMALL_BLOCK_SIZE 32 +#endif + +// MEMORY_MANAGER_MEDIUM_BLOCK_COUNT - Size of each memory blocks identified as 'medium' block. <0-255> + + +#ifndef MEMORY_MANAGER_MEDIUM_BLOCK_COUNT +#define MEMORY_MANAGER_MEDIUM_BLOCK_COUNT 0 +#endif + +// MEMORY_MANAGER_MEDIUM_BLOCK_SIZE - Size of each memory blocks identified as 'medium' block. +// Size of each memory blocks identified as 'medium' block. Memory block are recommended to be word-sized. + +#ifndef MEMORY_MANAGER_MEDIUM_BLOCK_SIZE +#define MEMORY_MANAGER_MEDIUM_BLOCK_SIZE 256 +#endif + +// MEMORY_MANAGER_LARGE_BLOCK_COUNT - Size of each memory blocks identified as 'large' block. <0-255> + + +#ifndef MEMORY_MANAGER_LARGE_BLOCK_COUNT +#define MEMORY_MANAGER_LARGE_BLOCK_COUNT 0 +#endif + +// MEMORY_MANAGER_LARGE_BLOCK_SIZE - Size of each memory blocks identified as 'large' block. +// Size of each memory blocks identified as 'large' block. Memory block are recommended to be word-sized. + +#ifndef MEMORY_MANAGER_LARGE_BLOCK_SIZE +#define MEMORY_MANAGER_LARGE_BLOCK_SIZE 256 +#endif + +// MEMORY_MANAGER_XLARGE_BLOCK_COUNT - Size of each memory blocks identified as 'extra large' block. <0-255> + + +#ifndef MEMORY_MANAGER_XLARGE_BLOCK_COUNT +#define MEMORY_MANAGER_XLARGE_BLOCK_COUNT 0 +#endif + +// MEMORY_MANAGER_XLARGE_BLOCK_SIZE - Size of each memory blocks identified as 'extra large' block. +// Size of each memory blocks identified as 'extra large' block. Memory block are recommended to be word-sized. + +#ifndef MEMORY_MANAGER_XLARGE_BLOCK_SIZE +#define MEMORY_MANAGER_XLARGE_BLOCK_SIZE 1320 +#endif + +// MEMORY_MANAGER_XXLARGE_BLOCK_COUNT - Size of each memory blocks identified as 'extra extra large' block. <0-255> + + +#ifndef MEMORY_MANAGER_XXLARGE_BLOCK_COUNT +#define MEMORY_MANAGER_XXLARGE_BLOCK_COUNT 0 +#endif + +// MEMORY_MANAGER_XXLARGE_BLOCK_SIZE - Size of each memory blocks identified as 'extra extra large' block. +// Size of each memory blocks identified as 'extra extra large' block. Memory block are recommended to be word-sized. + +#ifndef MEMORY_MANAGER_XXLARGE_BLOCK_SIZE +#define MEMORY_MANAGER_XXLARGE_BLOCK_SIZE 3444 +#endif + +// MEMORY_MANAGER_XSMALL_BLOCK_COUNT - Size of each memory blocks identified as 'extra small' block. <0-255> + + +#ifndef MEMORY_MANAGER_XSMALL_BLOCK_COUNT +#define MEMORY_MANAGER_XSMALL_BLOCK_COUNT 0 +#endif + +// MEMORY_MANAGER_XSMALL_BLOCK_SIZE - Size of each memory blocks identified as 'extra small' block. +// Size of each memory blocks identified as 'extra large' block. Memory block are recommended to be word-sized. + +#ifndef MEMORY_MANAGER_XSMALL_BLOCK_SIZE +#define MEMORY_MANAGER_XSMALL_BLOCK_SIZE 64 +#endif + +// MEMORY_MANAGER_XXSMALL_BLOCK_COUNT - Size of each memory blocks identified as 'extra extra small' block. <0-255> + + +#ifndef MEMORY_MANAGER_XXSMALL_BLOCK_COUNT +#define MEMORY_MANAGER_XXSMALL_BLOCK_COUNT 0 +#endif + +// MEMORY_MANAGER_XXSMALL_BLOCK_SIZE - Size of each memory blocks identified as 'extra extra small' block. +// Size of each memory blocks identified as 'extra extra small' block. Memory block are recommended to be word-sized. + +#ifndef MEMORY_MANAGER_XXSMALL_BLOCK_SIZE +#define MEMORY_MANAGER_XXSMALL_BLOCK_SIZE 32 +#endif + +// MEM_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef MEM_MANAGER_CONFIG_LOG_ENABLED +#define MEM_MANAGER_CONFIG_LOG_ENABLED 0 +#endif +// MEM_MANAGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef MEM_MANAGER_CONFIG_LOG_LEVEL +#define MEM_MANAGER_CONFIG_LOG_LEVEL 3 +#endif + +// MEM_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef MEM_MANAGER_CONFIG_INFO_COLOR +#define MEM_MANAGER_CONFIG_INFO_COLOR 0 +#endif + +// MEM_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef MEM_MANAGER_CONFIG_DEBUG_COLOR +#define MEM_MANAGER_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// MEM_MANAGER_DISABLE_API_PARAM_CHECK - Disable API parameter checks in the module. + + +#ifndef MEM_MANAGER_DISABLE_API_PARAM_CHECK +#define MEM_MANAGER_DISABLE_API_PARAM_CHECK 0 +#endif + +// + +// NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module +//========================================================== +#ifndef NRF_BALLOC_ENABLED +#define NRF_BALLOC_ENABLED 1 +#endif +// NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module. +//========================================================== +#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED +#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0 +#endif +// NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard. <0-255> + + +#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS +#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1 +#endif + +// NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard. <0-255> + + +#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS +#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1 +#endif + +// NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED - Enables basic checks in this module. + + +#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED +#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0 +#endif + +// NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED - Enables double memory free check in this module. + + +#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED +#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0 +#endif + +// NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED - Enables free memory corruption check in this module. + + +#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED +#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0 +#endif + +// NRF_BALLOC_CLI_CMDS - Enable CLI commands specific to the module + + +#ifndef NRF_BALLOC_CLI_CMDS +#define NRF_BALLOC_CLI_CMDS 0 +#endif + +// + +// + +// NRF_FPRINTF_ENABLED - nrf_fprintf - fprintf function. + + +#ifndef NRF_FPRINTF_ENABLED +#define NRF_FPRINTF_ENABLED 1 +#endif + +// NRF_FSTORAGE_ENABLED - nrf_fstorage - Flash abstraction library +//========================================================== +#ifndef NRF_FSTORAGE_ENABLED +#define NRF_FSTORAGE_ENABLED 1 +#endif +// nrf_fstorage - Common settings + +// Common settings to all fstorage implementations +//========================================================== +// NRF_FSTORAGE_PARAM_CHECK_DISABLED - Disable user input validation + + +// If selected, use ASSERT to validate user input. +// This effectively removes user input validation in production code. +// Recommended setting: OFF, only enable this setting if size is a major concern. + +#ifndef NRF_FSTORAGE_PARAM_CHECK_DISABLED +#define NRF_FSTORAGE_PARAM_CHECK_DISABLED 0 +#endif + +// +//========================================================== + +// nrf_fstorage_sd - Implementation using the SoftDevice + +// Configuration options for the fstorage implementation using the SoftDevice +//========================================================== +// NRF_FSTORAGE_SD_QUEUE_SIZE - Size of the internal queue of operations +// Increase this value if API calls frequently return the error @ref NRF_ERROR_NO_MEM. + +#ifndef NRF_FSTORAGE_SD_QUEUE_SIZE +#define NRF_FSTORAGE_SD_QUEUE_SIZE 4 +#endif + +// NRF_FSTORAGE_SD_MAX_RETRIES - Maximum number of attempts at executing an operation when the SoftDevice is busy +// Increase this value if events frequently return the @ref NRF_ERROR_TIMEOUT error. +// The SoftDevice might fail to schedule flash access due to high BLE activity. + +#ifndef NRF_FSTORAGE_SD_MAX_RETRIES +#define NRF_FSTORAGE_SD_MAX_RETRIES 8 +#endif + +// NRF_FSTORAGE_SD_MAX_WRITE_SIZE - Maximum number of bytes to be written to flash in a single operation +// This value must be a multiple of four. +// Lowering this value can increase the chances of the SoftDevice being able to execute flash operations in between radio activity. +// This value is bound by the maximum number of bytes that can be written to flash in a single call to @ref sd_flash_write. +// That is 1024 bytes for nRF51 ICs and 4096 bytes for nRF52 ICs. + +#ifndef NRF_FSTORAGE_SD_MAX_WRITE_SIZE +#define NRF_FSTORAGE_SD_MAX_WRITE_SIZE 4096 +#endif + +// +//========================================================== + +// + +// NRF_MEMOBJ_ENABLED - nrf_memobj - Linked memory allocator module + + +#ifndef NRF_MEMOBJ_ENABLED +#define NRF_MEMOBJ_ENABLED 1 +#endif + +// NRF_QUEUE_ENABLED - nrf_queue - Queue module +//========================================================== +#ifndef NRF_QUEUE_ENABLED +#define NRF_QUEUE_ENABLED 0 +#endif +// NRF_QUEUE_CLI_CMDS - Enable CLI commands specific to the module + + +#ifndef NRF_QUEUE_CLI_CMDS +#define NRF_QUEUE_CLI_CMDS 0 +#endif + +// + +// NRF_SORTLIST_ENABLED - nrf_sortlist - Sorted list + + +#ifndef NRF_SORTLIST_ENABLED +#define NRF_SORTLIST_ENABLED 1 +#endif + +// NRF_STRERROR_ENABLED - nrf_strerror - Library for converting error code to string. + + +#ifndef NRF_STRERROR_ENABLED +#define NRF_STRERROR_ENABLED 1 +#endif + +// SLIP_ENABLED - slip - SLIP encoding and decoding + + +#ifndef SLIP_ENABLED +#define SLIP_ENABLED 1 +#endif + +// +//========================================================== + +// nRF_Log + +//========================================================== +// NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED - nrf_log_str_formatter - Log string formatter + + +#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED +#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1 +#endif + +// nrf_log - Logger + +//========================================================== +// NRF_LOG_ENABLED - Logging module for nRF5 SDK +//========================================================== +#ifndef NRF_LOG_ENABLED +#define NRF_LOG_ENABLED 0 +#endif +// NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string +//========================================================== +#ifndef NRF_LOG_USES_COLORS +#define NRF_LOG_USES_COLORS 0 +#endif +// NRF_LOG_COLOR_DEFAULT - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_COLOR_DEFAULT +#define NRF_LOG_COLOR_DEFAULT 0 +#endif + +// NRF_LOG_ERROR_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_ERROR_COLOR +#define NRF_LOG_ERROR_COLOR 2 +#endif + +// NRF_LOG_WARNING_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_WARNING_COLOR +#define NRF_LOG_WARNING_COLOR 4 +#endif + +// + +// NRF_LOG_DEFAULT_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_LOG_DEFAULT_LEVEL +#define NRF_LOG_DEFAULT_LEVEL 3 +#endif + +// NRF_LOG_DEFERRED - Enable deffered logger. + + +// Log data is buffered and can be processed in idle. + +#ifndef NRF_LOG_DEFERRED +#define NRF_LOG_DEFERRED 1 +#endif + +// NRF_LOG_BUFSIZE - Size of the buffer for storing logs (in bytes). + + +// Must be power of 2 and multiple of 4. +// If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum. +// <128=> 128 +// <256=> 256 +// <512=> 512 +// <1024=> 1024 +// <2048=> 2048 +// <4096=> 4096 +// <8192=> 8192 +// <16384=> 16384 + +#ifndef NRF_LOG_BUFSIZE +#define NRF_LOG_BUFSIZE 1024 +#endif + +// NRF_LOG_ALLOW_OVERFLOW - Configures behavior when circular buffer is full. + + +// If set then oldest logs are overwritten. Otherwise a +// marker is injected informing about overflow. + +#ifndef NRF_LOG_ALLOW_OVERFLOW +#define NRF_LOG_ALLOW_OVERFLOW 1 +#endif + +// NRF_LOG_USES_TIMESTAMP - Enable timestamping + +// Function for getting the timestamp is provided by the user +//========================================================== +#ifndef NRF_LOG_USES_TIMESTAMP +#define NRF_LOG_USES_TIMESTAMP 0 +#endif +// NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) +#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY +#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768 +#endif + +// + +// NRF_LOG_FILTERS_ENABLED - Enable dynamic filtering of logs. + + +#ifndef NRF_LOG_FILTERS_ENABLED +#define NRF_LOG_FILTERS_ENABLED 0 +#endif + +// NRF_LOG_CLI_CMDS - Enable CLI commands for the module. + + +#ifndef NRF_LOG_CLI_CMDS +#define NRF_LOG_CLI_CMDS 0 +#endif + +// Log message pool - Configuration of log message pool + +//========================================================== +// NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. +// If a small value is set, then performance of logs processing +// is degraded because data is fragmented. Bigger value impacts +// RAM memory utilization. The size is set to fit a message with +// a timestamp and up to 2 arguments in a single memory object. + +#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE +#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20 +#endif + +// NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects +// If a small value is set, then it may lead to a deadlock +// in certain cases if backend has high latency and holds +// multiple messages for long time. Bigger value impacts +// RAM memory usage. + +#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT +#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8 +#endif + +// +//========================================================== + +// + +// nrf_log module configuration + +//========================================================== +// nrf_log in nRF_Core + +//========================================================== +// NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_MPU_CONFIG_LOG_ENABLED +#define NRF_MPU_CONFIG_LOG_ENABLED 0 +#endif +// NRF_MPU_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_MPU_CONFIG_LOG_LEVEL +#define NRF_MPU_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_MPU_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MPU_CONFIG_INFO_COLOR +#define NRF_MPU_CONFIG_INFO_COLOR 0 +#endif + +// NRF_MPU_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MPU_CONFIG_DEBUG_COLOR +#define NRF_MPU_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED +#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0 +#endif +// NRF_STACK_GUARD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL +#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_STACK_GUARD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR +#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0 +#endif + +// NRF_STACK_GUARD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR +#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED +#define TASK_MANAGER_CONFIG_LOG_ENABLED 0 +#endif +// TASK_MANAGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL +#define TASK_MANAGER_CONFIG_LOG_LEVEL 3 +#endif + +// TASK_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TASK_MANAGER_CONFIG_INFO_COLOR +#define TASK_MANAGER_CONFIG_INFO_COLOR 0 +#endif + +// TASK_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR +#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// +//========================================================== + +// nrf_log in nRF_Drivers + +//========================================================== +// CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef CLOCK_CONFIG_LOG_ENABLED +#define CLOCK_CONFIG_LOG_ENABLED 0 +#endif +// CLOCK_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef CLOCK_CONFIG_LOG_LEVEL +#define CLOCK_CONFIG_LOG_LEVEL 3 +#endif + +// CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef CLOCK_CONFIG_INFO_COLOR +#define CLOCK_CONFIG_INFO_COLOR 0 +#endif + +// CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef CLOCK_CONFIG_DEBUG_COLOR +#define CLOCK_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// COMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef COMP_CONFIG_LOG_ENABLED +#define COMP_CONFIG_LOG_ENABLED 0 +#endif +// COMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef COMP_CONFIG_LOG_LEVEL +#define COMP_CONFIG_LOG_LEVEL 3 +#endif + +// COMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMP_CONFIG_INFO_COLOR +#define COMP_CONFIG_INFO_COLOR 0 +#endif + +// COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMP_CONFIG_DEBUG_COLOR +#define COMP_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef GPIOTE_CONFIG_LOG_ENABLED +#define GPIOTE_CONFIG_LOG_ENABLED 0 +#endif +// GPIOTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef GPIOTE_CONFIG_LOG_LEVEL +#define GPIOTE_CONFIG_LOG_LEVEL 3 +#endif + +// GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef GPIOTE_CONFIG_INFO_COLOR +#define GPIOTE_CONFIG_INFO_COLOR 0 +#endif + +// GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef GPIOTE_CONFIG_DEBUG_COLOR +#define GPIOTE_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef LPCOMP_CONFIG_LOG_ENABLED +#define LPCOMP_CONFIG_LOG_ENABLED 0 +#endif +// LPCOMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef LPCOMP_CONFIG_LOG_LEVEL +#define LPCOMP_CONFIG_LOG_LEVEL 3 +#endif + +// LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef LPCOMP_CONFIG_INFO_COLOR +#define LPCOMP_CONFIG_INFO_COLOR 0 +#endif + +// LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef LPCOMP_CONFIG_DEBUG_COLOR +#define LPCOMP_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// PDM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PDM_CONFIG_LOG_ENABLED +#define PDM_CONFIG_LOG_ENABLED 0 +#endif +// PDM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PDM_CONFIG_LOG_LEVEL +#define PDM_CONFIG_LOG_LEVEL 3 +#endif + +// PDM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PDM_CONFIG_INFO_COLOR +#define PDM_CONFIG_INFO_COLOR 0 +#endif + +// PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PDM_CONFIG_DEBUG_COLOR +#define PDM_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// PPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PPI_CONFIG_LOG_ENABLED +#define PPI_CONFIG_LOG_ENABLED 0 +#endif +// PPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PPI_CONFIG_LOG_LEVEL +#define PPI_CONFIG_LOG_LEVEL 3 +#endif + +// PPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PPI_CONFIG_INFO_COLOR +#define PPI_CONFIG_INFO_COLOR 0 +#endif + +// PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PPI_CONFIG_DEBUG_COLOR +#define PPI_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// PWM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PWM_CONFIG_LOG_ENABLED +#define PWM_CONFIG_LOG_ENABLED 0 +#endif +// PWM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PWM_CONFIG_LOG_LEVEL +#define PWM_CONFIG_LOG_LEVEL 3 +#endif + +// PWM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PWM_CONFIG_INFO_COLOR +#define PWM_CONFIG_INFO_COLOR 0 +#endif + +// PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PWM_CONFIG_DEBUG_COLOR +#define PWM_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// QDEC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef QDEC_CONFIG_LOG_ENABLED +#define QDEC_CONFIG_LOG_ENABLED 0 +#endif +// QDEC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef QDEC_CONFIG_LOG_LEVEL +#define QDEC_CONFIG_LOG_LEVEL 3 +#endif + +// QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef QDEC_CONFIG_INFO_COLOR +#define QDEC_CONFIG_INFO_COLOR 0 +#endif + +// QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef QDEC_CONFIG_DEBUG_COLOR +#define QDEC_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// RNG_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef RNG_CONFIG_LOG_ENABLED +#define RNG_CONFIG_LOG_ENABLED 0 +#endif +// RNG_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef RNG_CONFIG_LOG_LEVEL +#define RNG_CONFIG_LOG_LEVEL 3 +#endif + +// RNG_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RNG_CONFIG_INFO_COLOR +#define RNG_CONFIG_INFO_COLOR 0 +#endif + +// RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RNG_CONFIG_DEBUG_COLOR +#define RNG_CONFIG_DEBUG_COLOR 0 +#endif + +// RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED - Enables logging of random numbers. + + +#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED +#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0 +#endif + +// + +// RTC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef RTC_CONFIG_LOG_ENABLED +#define RTC_CONFIG_LOG_ENABLED 0 +#endif +// RTC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef RTC_CONFIG_LOG_LEVEL +#define RTC_CONFIG_LOG_LEVEL 3 +#endif + +// RTC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RTC_CONFIG_INFO_COLOR +#define RTC_CONFIG_INFO_COLOR 0 +#endif + +// RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RTC_CONFIG_DEBUG_COLOR +#define RTC_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// SAADC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SAADC_CONFIG_LOG_ENABLED +#define SAADC_CONFIG_LOG_ENABLED 0 +#endif +// SAADC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SAADC_CONFIG_LOG_LEVEL +#define SAADC_CONFIG_LOG_LEVEL 3 +#endif + +// SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SAADC_CONFIG_INFO_COLOR +#define SAADC_CONFIG_INFO_COLOR 0 +#endif + +// SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SAADC_CONFIG_DEBUG_COLOR +#define SAADC_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// SPIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SPIS_CONFIG_LOG_ENABLED +#define SPIS_CONFIG_LOG_ENABLED 0 +#endif +// SPIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SPIS_CONFIG_LOG_LEVEL +#define SPIS_CONFIG_LOG_LEVEL 3 +#endif + +// SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPIS_CONFIG_INFO_COLOR +#define SPIS_CONFIG_INFO_COLOR 0 +#endif + +// SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPIS_CONFIG_DEBUG_COLOR +#define SPIS_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// SPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SPI_CONFIG_LOG_ENABLED +#define SPI_CONFIG_LOG_ENABLED 0 +#endif +// SPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SPI_CONFIG_LOG_LEVEL +#define SPI_CONFIG_LOG_LEVEL 3 +#endif + +// SPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPI_CONFIG_INFO_COLOR +#define SPI_CONFIG_INFO_COLOR 0 +#endif + +// SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPI_CONFIG_DEBUG_COLOR +#define SPI_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TIMER_CONFIG_LOG_ENABLED +#define TIMER_CONFIG_LOG_ENABLED 0 +#endif +// TIMER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TIMER_CONFIG_LOG_LEVEL +#define TIMER_CONFIG_LOG_LEVEL 3 +#endif + +// TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TIMER_CONFIG_INFO_COLOR +#define TIMER_CONFIG_INFO_COLOR 0 +#endif + +// TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TIMER_CONFIG_DEBUG_COLOR +#define TIMER_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// TWIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TWIS_CONFIG_LOG_ENABLED +#define TWIS_CONFIG_LOG_ENABLED 0 +#endif +// TWIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TWIS_CONFIG_LOG_LEVEL +#define TWIS_CONFIG_LOG_LEVEL 3 +#endif + +// TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWIS_CONFIG_INFO_COLOR +#define TWIS_CONFIG_INFO_COLOR 0 +#endif + +// TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWIS_CONFIG_DEBUG_COLOR +#define TWIS_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// TWI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TWI_CONFIG_LOG_ENABLED +#define TWI_CONFIG_LOG_ENABLED 0 +#endif +// TWI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TWI_CONFIG_LOG_LEVEL +#define TWI_CONFIG_LOG_LEVEL 3 +#endif + +// TWI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWI_CONFIG_INFO_COLOR +#define TWI_CONFIG_INFO_COLOR 0 +#endif + +// TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWI_CONFIG_DEBUG_COLOR +#define TWI_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef UART_CONFIG_LOG_ENABLED +#define UART_CONFIG_LOG_ENABLED 0 +#endif +// UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef UART_CONFIG_LOG_LEVEL +#define UART_CONFIG_LOG_LEVEL 3 +#endif + +// UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef UART_CONFIG_INFO_COLOR +#define UART_CONFIG_INFO_COLOR 0 +#endif + +// UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef UART_CONFIG_DEBUG_COLOR +#define UART_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// USBD_CONFIG_LOG_ENABLED - Enable logging in the module +//========================================================== +#ifndef USBD_CONFIG_LOG_ENABLED +#define USBD_CONFIG_LOG_ENABLED 0 +#endif +// USBD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef USBD_CONFIG_LOG_LEVEL +#define USBD_CONFIG_LOG_LEVEL 3 +#endif + +// USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef USBD_CONFIG_INFO_COLOR +#define USBD_CONFIG_INFO_COLOR 0 +#endif + +// USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef USBD_CONFIG_DEBUG_COLOR +#define USBD_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// WDT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef WDT_CONFIG_LOG_ENABLED +#define WDT_CONFIG_LOG_ENABLED 0 +#endif +// WDT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef WDT_CONFIG_LOG_LEVEL +#define WDT_CONFIG_LOG_LEVEL 3 +#endif + +// WDT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef WDT_CONFIG_INFO_COLOR +#define WDT_CONFIG_INFO_COLOR 0 +#endif + +// WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef WDT_CONFIG_DEBUG_COLOR +#define WDT_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// +//========================================================== + +// nrf_log in nRF_Libraries + +//========================================================== +// APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_TIMER_CONFIG_LOG_ENABLED +#define APP_TIMER_CONFIG_LOG_ENABLED 0 +#endif +// APP_TIMER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_TIMER_CONFIG_LOG_LEVEL +#define APP_TIMER_CONFIG_LOG_LEVEL 3 +#endif + +// APP_TIMER_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. + + +// If module generates a lot of logs, initial log level can +// be decreased to prevent flooding. Severity level can be +// increased on instance basis. +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL +#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3 +#endif + +// APP_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_TIMER_CONFIG_INFO_COLOR +#define APP_TIMER_CONFIG_INFO_COLOR 0 +#endif + +// APP_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_TIMER_CONFIG_DEBUG_COLOR +#define APP_TIMER_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED +#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0 +#endif +// APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL +#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3 +#endif + +// APP_USBD_CDC_ACM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR +#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0 +#endif + +// APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR +#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED +#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0 +#endif +// APP_USBD_DUMMY_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL +#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3 +#endif + +// APP_USBD_DUMMY_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR +#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0 +#endif + +// APP_USBD_DUMMY_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR +#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED +#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0 +#endif +// APP_USBD_MSC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL +#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3 +#endif + +// APP_USBD_MSC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR +#define APP_USBD_MSC_CONFIG_INFO_COLOR 0 +#endif + +// APP_USBD_MSC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR +#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0 +#endif +// APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3 +#endif + +// APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0 +#endif + +// APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED +#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0 +#endif +// NRF_ATFIFO_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL +#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL +#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3 +#endif + +// NRF_ATFIFO_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR +#define NRF_ATFIFO_CONFIG_INFO_COLOR 0 +#endif + +// NRF_ATFIFO_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR +#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED +#define NRF_BALLOC_CONFIG_LOG_ENABLED 0 +#endif +// NRF_BALLOC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL +#define NRF_BALLOC_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. + + +// If module generates a lot of logs, initial log level can +// be decreased to prevent flooding. Severity level can be +// increased on instance basis. +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL +#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3 +#endif + +// NRF_BALLOC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_BALLOC_CONFIG_INFO_COLOR +#define NRF_BALLOC_CONFIG_INFO_COLOR 0 +#endif + +// NRF_BALLOC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR +#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED +#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0 +#endif +// NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL +#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_CLI_BLE_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR +#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0 +#endif + +// NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR +#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED +#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0 +#endif +// NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL +#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR +#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0 +#endif + +// NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR +#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED +#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0 +#endif +// NRF_CLI_UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL +#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_CLI_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR +#define NRF_CLI_UART_CONFIG_INFO_COLOR 0 +#endif + +// NRF_CLI_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR +#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED +#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0 +#endif +// NRF_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL +#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR +#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0 +#endif + +// NRF_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR +#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED +#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0 +#endif +// NRF_MEMOBJ_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL +#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_MEMOBJ_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR +#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0 +#endif + +// NRF_MEMOBJ_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR +#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED +#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0 +#endif +// NRF_PWR_MGMT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL +#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_PWR_MGMT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR +#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0 +#endif + +// NRF_PWR_MGMT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR +#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED +#define NRF_QUEUE_CONFIG_LOG_ENABLED 0 +#endif +// NRF_QUEUE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL +#define NRF_QUEUE_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL +#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3 +#endif + +// NRF_QUEUE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_QUEUE_CONFIG_INFO_COLOR +#define NRF_QUEUE_CONFIG_INFO_COLOR 0 +#endif + +// NRF_QUEUE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR +#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module. +//========================================================== +#ifndef NRF_SDH_ANT_LOG_ENABLED +#define NRF_SDH_ANT_LOG_ENABLED 0 +#endif +// NRF_SDH_ANT_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_ANT_LOG_LEVEL +#define NRF_SDH_ANT_LOG_LEVEL 3 +#endif + +// NRF_SDH_ANT_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_ANT_INFO_COLOR +#define NRF_SDH_ANT_INFO_COLOR 0 +#endif + +// NRF_SDH_ANT_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_ANT_DEBUG_COLOR +#define NRF_SDH_ANT_DEBUG_COLOR 0 +#endif + +// + +// NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module. +//========================================================== +#ifndef NRF_SDH_BLE_LOG_ENABLED +#define NRF_SDH_BLE_LOG_ENABLED 0 +#endif +// NRF_SDH_BLE_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_BLE_LOG_LEVEL +#define NRF_SDH_BLE_LOG_LEVEL 3 +#endif + +// NRF_SDH_BLE_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_BLE_INFO_COLOR +#define NRF_SDH_BLE_INFO_COLOR 0 +#endif + +// NRF_SDH_BLE_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_BLE_DEBUG_COLOR +#define NRF_SDH_BLE_DEBUG_COLOR 0 +#endif + +// + +// NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module. +//========================================================== +#ifndef NRF_SDH_LOG_ENABLED +#define NRF_SDH_LOG_ENABLED 0 +#endif +// NRF_SDH_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_LOG_LEVEL +#define NRF_SDH_LOG_LEVEL 3 +#endif + +// NRF_SDH_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_INFO_COLOR +#define NRF_SDH_INFO_COLOR 0 +#endif + +// NRF_SDH_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_DEBUG_COLOR +#define NRF_SDH_DEBUG_COLOR 0 +#endif + +// + +// NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module. +//========================================================== +#ifndef NRF_SDH_SOC_LOG_ENABLED +#define NRF_SDH_SOC_LOG_ENABLED 0 +#endif +// NRF_SDH_SOC_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_SOC_LOG_LEVEL +#define NRF_SDH_SOC_LOG_LEVEL 3 +#endif + +// NRF_SDH_SOC_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_SOC_INFO_COLOR +#define NRF_SDH_SOC_INFO_COLOR 0 +#endif + +// NRF_SDH_SOC_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_SOC_DEBUG_COLOR +#define NRF_SDH_SOC_DEBUG_COLOR 0 +#endif + +// + +// NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED +#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0 +#endif +// NRF_SORTLIST_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL +#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_SORTLIST_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR +#define NRF_SORTLIST_CONFIG_INFO_COLOR 0 +#endif + +// NRF_SORTLIST_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR +#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED +#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0 +#endif +// NRF_TWI_SENSOR_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL +#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_TWI_SENSOR_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR +#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0 +#endif + +// NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR +#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// +//========================================================== + +// nrf_log in nRF_Serialization + +//========================================================== +// SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED +#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0 +#endif +// SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL +#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3 +#endif + +// SER_HAL_TRANSPORT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR +#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0 +#endif + +// SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR +#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// +//========================================================== + +// +//========================================================== + +// +//========================================================== + +// +//========================================================== + +// nRF_USB_DFU + +//========================================================== +// NRF_DFU_SERIAL_USB_RX_BUFFERS - nrf_dfu_serial_usb - USB DFU transport +// Number of buffers depends on flash access vs. +// transport throughtput. If value is too low it may lead +// to received packets being dropped. + +#ifndef NRF_DFU_SERIAL_USB_RX_BUFFERS +#define NRF_DFU_SERIAL_USB_RX_BUFFERS 3 +#endif + +// +//========================================================== + +// <<< end of configuration section >>> +#endif //SDK_CONFIG_H + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/iar/open_bootloader_iar_nRF5x.icf b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/iar/open_bootloader_iar_nRF5x.icf new file mode 100644 index 0000000..56c72ab --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/iar/open_bootloader_iar_nRF5x.icf @@ -0,0 +1,36 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0xe0000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0xe0000; +define symbol __ICFEDIT_region_ROM_end__ = 0xfdfff; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000008; +define symbol __ICFEDIT_region_RAM_end__ = 0x2003ffff; +export symbol __ICFEDIT_region_RAM_start__; +export symbol __ICFEDIT_region_RAM_end__; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 2048; +define symbol __ICFEDIT_size_heap__ = 0; +/**** End of ICF editor section. ###ICF###*/ + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; +define block RO_END with alignment = 8, size = 0 { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +keep { section .intvec }; +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; +place in ROM_region { readonly, + block RO_END }; +place in RAM_region { readwrite, + block CSTACK, + block HEAP }; + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/iar/open_bootloader_usb_mbr_pca10059.ewd b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/iar/open_bootloader_usb_mbr_pca10059.ewd new file mode 100644 index 0000000..a846fea --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/iar/open_bootloader_usb_mbr_pca10059.ewd @@ -0,0 +1,1350 @@ + + + + 2 + nrf52840_xxaa + + ARM + + 0 + + C-SPY + 2 + + 26 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ARMSIM_ID + 2 + + 1 + 1 + 0 + + + + + + + + ANGEL_ID + 2 + + 0 + 1 + 0 + + + + + + + + + + + + CMSISDAP_ID + 2 + + 2 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + GDBSERVER_ID + 2 + + 0 + 1 + 0 + + + + + + + + + + + IARROM_ID + 2 + + 1 + 1 + 0 + + + + + + + + + IJET_ID + 2 + + 3 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + JLINK_ID + 2 + + 15 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + LMIFTDI_ID + 2 + + 2 + 1 + 0 + + + + + + + + + + MACRAIGOR_ID + 2 + + 3 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + PEMICRO_ID + 2 + + 1 + 1 + 0 + + + + + + + + + + + + + + + + + + + RDI_ID + 2 + + 2 + 1 + 0 + + + + + + + + + + + + + + + + STLINK_ID + 2 + + 2 + 1 + 0 + + + + + + + + + + + THIRDPARTY_ID + 2 + + 0 + 1 + 0 + + + + + + + + XDS100_ID + 2 + + 2 + 1 + 0 + + + + + + + + + + + + + $TOOLKIT_DIR$\plugins\middleware\HCCWare\HCCWare.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\AVIX\AVIX.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\MQX\MQXRtosPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin + 0 + + + $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin + 1 + + + $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin + 1 + + + $EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin + 0 + + + + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/iar/open_bootloader_usb_mbr_pca10059.ewp b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/iar/open_bootloader_usb_mbr_pca10059.ewp new file mode 100644 index 0000000..c8f0be3 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/iar/open_bootloader_usb_mbr_pca10059.ewp @@ -0,0 +1,1164 @@ + + + + + 2 + nrf52840_xxaa + + ARM + + 0 + + General + 3 + + 22 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 31 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 9 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 0 + + + + + + + + + CUSTOM + 3 + + + + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 16 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 0 + + + + + + + BILINK + 0 + + + + nRF_USB_DFU + $PROJ_DIR$\..\..\..\..\..\components\libraries\bootloader\serial_dfu\nrf_dfu_serial_usb.c + nRF_Log + $PROJ_DIR$\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_frontend.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\experimental_log\src\nrf_log_str_formatter.c + Board Definition + $PROJ_DIR$\..\..\..\..\..\components\boards\boards.c + nano-pb + $PROJ_DIR$\..\..\..\..\..\external\nano-pb\pb_common.c + $PROJ_DIR$\..\..\..\..\..\external\nano-pb\pb_decode.c + nRF_Crypto backend CC310_BL + $PROJ_DIR$\..\..\..\..\..\components\libraries\crypto\backend\cc310_bl\cc310_bl_backend_ecc.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\crypto\backend\cc310_bl\cc310_bl_backend_ecdsa.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\crypto\backend\cc310_bl\cc310_bl_backend_hash.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\crypto\backend\cc310_bl\cc310_bl_backend_init.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\crypto\backend\cc310_bl\cc310_bl_backend_shared.c + nRF_Libraries + $PROJ_DIR$\..\..\..\..\..\components\libraries\util\app_error_weak.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\scheduler\app_scheduler.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\timer\experimental\app_timer2.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\usbd\app_usbd.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\usbd\class\cdc\acm\app_usbd_cdc_acm.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\usbd\app_usbd_core.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\usbd\app_usbd_serial_num.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\usbd\app_usbd_string_desc.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\util\app_util_platform.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\crc32\crc32.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\timer\experimental\drv_rtc.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\led_softblink\led_softblink.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\low_power_pwm\low_power_pwm.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\mem_manager\mem_manager.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\util\nrf_assert.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\atomic_fifo\nrf_atfifo.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\atomic\nrf_atomic.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\balloc\nrf_balloc.c + $PROJ_DIR$\..\..\..\..\..\external\fprintf\nrf_fprintf.c + $PROJ_DIR$\..\..\..\..\..\external\fprintf\nrf_fprintf_format.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\fstorage\nrf_fstorage.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\fstorage\nrf_fstorage_nvmc.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\experimental_memobj\nrf_memobj.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\queue\nrf_queue.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\sortlist\nrf_sortlist.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\strerror\nrf_strerror.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\slip\slip.c + nRF_Drivers + $PROJ_DIR$\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_clock.c + $PROJ_DIR$\..\..\..\..\..\integration\nrfx\legacy\nrf_drv_power.c + $PROJ_DIR$\..\..\..\..\..\components\drivers_nrf\usbd\nrf_drv_usbd.c + $PROJ_DIR$\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_nvic.c + $PROJ_DIR$\..\..\..\..\..\modules\nrfx\hal\nrf_nvmc.c + $PROJ_DIR$\..\..\..\..\..\components\drivers_nrf\nrf_soc_nosd\nrf_soc.c + $PROJ_DIR$\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_clock.c + $PROJ_DIR$\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power.c + $PROJ_DIR$\..\..\..\..\..\modules\nrfx\drivers\src\nrfx_power_clock.c + nRF_Crypto + $PROJ_DIR$\..\..\..\..\..\components\libraries\crypto\nrf_crypto_ecc.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\crypto\nrf_crypto_ecdsa.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\crypto\nrf_crypto_hash.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\crypto\nrf_crypto_init.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\crypto\nrf_crypto_shared.c + Application + $PROJ_DIR$\..\..\..\dfu_public_key.c + $PROJ_DIR$\..\..\main.c + $PROJ_DIR$\..\config\sdk_config.h + None + $PROJ_DIR$\..\..\..\..\..\modules\nrfx\mdk\iar_startup_nrf52840.s + $PROJ_DIR$\..\..\..\..\..\modules\nrfx\mdk\system_nrf52840.c + nRF_DFU + $PROJ_DIR$\..\..\..\..\..\components\libraries\bootloader\dfu\dfu-cc.pb.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_flash.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_handling_error.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_mbr.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_req_handler.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_settings.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_transport.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_utils.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_validation.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\bootloader\dfu\nrf_dfu_ver_validation.c + nRF_Serial_DFU + $PROJ_DIR$\..\..\..\..\..\components\libraries\bootloader\serial_dfu\nrf_dfu_serial.c + nrf_cc310_bl + $PROJ_DIR$\..\..\..\..\..\external\nrf_cc310_bl\lib\libnrf_cc310_bl_short_wchar_0.9.9.a + nRF_Bootloader + $PROJ_DIR$\..\..\..\..\..\components\libraries\bootloader\nrf_bootloader.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\bootloader\nrf_bootloader_app_start.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\bootloader\nrf_bootloader_app_start_final.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\bootloader\nrf_bootloader_dfu_timers.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\bootloader\nrf_bootloader_fw_activation.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\bootloader\nrf_bootloader_info.c + $PROJ_DIR$\..\..\..\..\..\components\libraries\bootloader\nrf_bootloader_wdt.c + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/ses/flash_placement.xml b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/ses/flash_placement.xml new file mode 100644 index 0000000..f49056a --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/ses/flash_placement.xml @@ -0,0 +1,55 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/ses/open_bootloader_usb_mbr_pca10059.emProject b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/ses/open_bootloader_usb_mbr_pca10059.emProject new file mode 100644 index 0000000..8208840 --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/ses/open_bootloader_usb_mbr_pca10059.emProject @@ -0,0 +1,147 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/ses/open_bootloader_usb_mbr_pca10059.emSession b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/ses/open_bootloader_usb_mbr_pca10059.emSession new file mode 100644 index 0000000..c90a56d --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/dfu/open_bootloader/pca10059_usb/ses/open_bootloader_usb_mbr_pca10059.emSession @@ -0,0 +1,7 @@ + + + + + + + \ No newline at end of file -- cgit v1.2.3