From 3061ecca3d0fdfb87dabbf5f63c9e06c2a30f53a Mon Sep 17 00:00:00 2001 From: Trygve Laugstøl Date: Thu, 23 Aug 2018 17:08:59 +0200 Subject: o Initial import. --- .../usbd_msc/pca10056/blank/config/sdk_config.h | 4456 ++++++++++++++++++++ 1 file changed, 4456 insertions(+) create mode 100644 thirdparty/nRF5_SDK_15.0.0_a53641a/examples/peripheral/usbd_msc/pca10056/blank/config/sdk_config.h (limited to 'thirdparty/nRF5_SDK_15.0.0_a53641a/examples/peripheral/usbd_msc/pca10056/blank/config') diff --git a/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/peripheral/usbd_msc/pca10056/blank/config/sdk_config.h b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/peripheral/usbd_msc/pca10056/blank/config/sdk_config.h new file mode 100644 index 0000000..c6cc36d --- /dev/null +++ b/thirdparty/nRF5_SDK_15.0.0_a53641a/examples/peripheral/usbd_msc/pca10056/blank/config/sdk_config.h @@ -0,0 +1,4456 @@ +/** + * Copyright (c) 2017 - 2018, Nordic Semiconductor ASA + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic + * Semiconductor ASA integrated circuit in a product or a software update for + * such product, must reproduce the above copyright notice, this list of + * conditions and the following disclaimer in the documentation and/or other + * materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS + * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE + * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + + + +#ifndef SDK_CONFIG_H +#define SDK_CONFIG_H +// <<< Use Configuration Wizard in Context Menu >>>\n +#ifdef USE_APP_CONFIG +#include "app_config.h" +#endif +// nRF_Drivers + +//========================================================== +// CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver - legacy layer +//========================================================== +#ifndef CLOCK_ENABLED +#define CLOCK_ENABLED 1 +#endif +// CLOCK_CONFIG_LF_SRC - LF Clock Source + +// <0=> RC +// <1=> XTAL +// <2=> Synth + +#ifndef CLOCK_CONFIG_LF_SRC +#define CLOCK_CONFIG_LF_SRC 1 +#endif + +// CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef CLOCK_CONFIG_IRQ_PRIORITY +#define CLOCK_CONFIG_IRQ_PRIORITY 7 +#endif + +// + +// GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer +//========================================================== +#ifndef GPIOTE_ENABLED +#define GPIOTE_ENABLED 1 +#endif +// GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins +#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS +#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4 +#endif + +// GPIOTE_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef GPIOTE_CONFIG_IRQ_PRIORITY +#define GPIOTE_CONFIG_IRQ_PRIORITY 7 +#endif + +// + +// NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver +//========================================================== +#ifndef NRFX_CLOCK_ENABLED +#define NRFX_CLOCK_ENABLED 1 +#endif +// NRFX_CLOCK_CONFIG_LF_SRC - LF Clock Source + +// <0=> RC +// <1=> XTAL +// <2=> Synth + +#ifndef NRFX_CLOCK_CONFIG_LF_SRC +#define NRFX_CLOCK_CONFIG_LF_SRC 1 +#endif + +// NRFX_CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY +#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED +#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_CLOCK_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL +#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR +#define NRFX_CLOCK_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR +#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver +//========================================================== +#ifndef NRFX_GPIOTE_ENABLED +#define NRFX_GPIOTE_ENABLED 1 +#endif +// NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins +#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS +#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 1 +#endif + +// NRFX_GPIOTE_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY +#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED +#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_GPIOTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL +#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR +#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR +#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver +//========================================================== +#ifndef NRFX_POWER_ENABLED +#define NRFX_POWER_ENABLED 1 +#endif +// NRFX_POWER_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_POWER_CONFIG_IRQ_PRIORITY +#define NRFX_POWER_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_POWER_CONFIG_DEFAULT_DCDCEN - The default configuration of main DCDC regulator + + +// This settings means only that components for DCDC regulator are installed and it can be enabled. + +#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCEN +#define NRFX_POWER_CONFIG_DEFAULT_DCDCEN 0 +#endif + +// NRFX_POWER_CONFIG_DEFAULT_DCDCENHV - The default configuration of High Voltage DCDC regulator + + +// This settings means only that components for DCDC regulator are installed and it can be enabled. + +#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCENHV +#define NRFX_POWER_CONFIG_DEFAULT_DCDCENHV 0 +#endif + +// + +// NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module +//========================================================== +#ifndef NRFX_PRS_ENABLED +#define NRFX_PRS_ENABLED 1 +#endif +// NRFX_PRS_BOX_0_ENABLED - Enables box 0 in the module. + + +#ifndef NRFX_PRS_BOX_0_ENABLED +#define NRFX_PRS_BOX_0_ENABLED 0 +#endif + +// NRFX_PRS_BOX_1_ENABLED - Enables box 1 in the module. + + +#ifndef NRFX_PRS_BOX_1_ENABLED +#define NRFX_PRS_BOX_1_ENABLED 0 +#endif + +// NRFX_PRS_BOX_2_ENABLED - Enables box 2 in the module. + + +#ifndef NRFX_PRS_BOX_2_ENABLED +#define NRFX_PRS_BOX_2_ENABLED 0 +#endif + +// NRFX_PRS_BOX_3_ENABLED - Enables box 3 in the module. + + +#ifndef NRFX_PRS_BOX_3_ENABLED +#define NRFX_PRS_BOX_3_ENABLED 0 +#endif + +// NRFX_PRS_BOX_4_ENABLED - Enables box 4 in the module. + + +#ifndef NRFX_PRS_BOX_4_ENABLED +#define NRFX_PRS_BOX_4_ENABLED 1 +#endif + +// NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_PRS_CONFIG_LOG_ENABLED +#define NRFX_PRS_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_PRS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_PRS_CONFIG_LOG_LEVEL +#define NRFX_PRS_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_PRS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_PRS_CONFIG_INFO_COLOR +#define NRFX_PRS_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_PRS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR +#define NRFX_PRS_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_QSPI_ENABLED - nrfx_qspi - QSPI peripheral driver +//========================================================== +#ifndef NRFX_QSPI_ENABLED +#define NRFX_QSPI_ENABLED 1 +#endif +// NRFX_QSPI_CONFIG_SCK_DELAY - tSHSL, tWHSL and tSHWL in number of 16 MHz periods (62.5 ns). <0-255> + + +#ifndef NRFX_QSPI_CONFIG_SCK_DELAY +#define NRFX_QSPI_CONFIG_SCK_DELAY 1 +#endif + +// NRFX_QSPI_CONFIG_XIP_OFFSET - Address offset in the external memory for Execute in Place operation. +#ifndef NRFX_QSPI_CONFIG_XIP_OFFSET +#define NRFX_QSPI_CONFIG_XIP_OFFSET 0 +#endif + +// NRFX_QSPI_CONFIG_READOC - Number of data lines and opcode used for reading. + +// <0=> FastRead +// <1=> Read2O +// <2=> Read2IO +// <3=> Read4O +// <4=> Read4IO + +#ifndef NRFX_QSPI_CONFIG_READOC +#define NRFX_QSPI_CONFIG_READOC 0 +#endif + +// NRFX_QSPI_CONFIG_WRITEOC - Number of data lines and opcode used for writing. + +// <0=> PP +// <1=> PP2O +// <2=> PP4O +// <3=> PP4IO + +#ifndef NRFX_QSPI_CONFIG_WRITEOC +#define NRFX_QSPI_CONFIG_WRITEOC 0 +#endif + +// NRFX_QSPI_CONFIG_ADDRMODE - Addressing mode. + +// <0=> 24bit +// <1=> 32bit + +#ifndef NRFX_QSPI_CONFIG_ADDRMODE +#define NRFX_QSPI_CONFIG_ADDRMODE 0 +#endif + +// NRFX_QSPI_CONFIG_MODE - SPI mode. + +// <0=> Mode 0 +// <1=> Mode 1 + +#ifndef NRFX_QSPI_CONFIG_MODE +#define NRFX_QSPI_CONFIG_MODE 0 +#endif + +// NRFX_QSPI_CONFIG_FREQUENCY - Frequency divider. + +// <0=> 32MHz/1 +// <1=> 32MHz/2 +// <2=> 32MHz/3 +// <3=> 32MHz/4 +// <4=> 32MHz/5 +// <5=> 32MHz/6 +// <6=> 32MHz/7 +// <7=> 32MHz/8 +// <8=> 32MHz/9 +// <9=> 32MHz/10 +// <10=> 32MHz/11 +// <11=> 32MHz/12 +// <12=> 32MHz/13 +// <13=> 32MHz/14 +// <14=> 32MHz/15 +// <15=> 32MHz/16 + +#ifndef NRFX_QSPI_CONFIG_FREQUENCY +#define NRFX_QSPI_CONFIG_FREQUENCY 15 +#endif + +// NRFX_QSPI_PIN_SCK - SCK pin value. +#ifndef NRFX_QSPI_PIN_SCK +#define NRFX_QSPI_PIN_SCK NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// NRFX_QSPI_PIN_CSN - CSN pin value. +#ifndef NRFX_QSPI_PIN_CSN +#define NRFX_QSPI_PIN_CSN NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// NRFX_QSPI_PIN_IO0 - IO0 pin value. +#ifndef NRFX_QSPI_PIN_IO0 +#define NRFX_QSPI_PIN_IO0 NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// NRFX_QSPI_PIN_IO1 - IO1 pin value. +#ifndef NRFX_QSPI_PIN_IO1 +#define NRFX_QSPI_PIN_IO1 NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// NRFX_QSPI_PIN_IO2 - IO2 pin value. +#ifndef NRFX_QSPI_PIN_IO2 +#define NRFX_QSPI_PIN_IO2 NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// NRFX_QSPI_PIN_IO3 - IO3 pin value. +#ifndef NRFX_QSPI_PIN_IO3 +#define NRFX_QSPI_PIN_IO3 NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// NRFX_QSPI_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_QSPI_CONFIG_IRQ_PRIORITY +#define NRFX_QSPI_CONFIG_IRQ_PRIORITY 7 +#endif + +// + +// NRFX_SPIM_ENABLED - nrfx_spim - SPIM peripheral driver +//========================================================== +#ifndef NRFX_SPIM_ENABLED +#define NRFX_SPIM_ENABLED 1 +#endif +// NRFX_SPIM0_ENABLED - Enable SPIM0 instance + + +#ifndef NRFX_SPIM0_ENABLED +#define NRFX_SPIM0_ENABLED 0 +#endif + +// NRFX_SPIM1_ENABLED - Enable SPIM1 instance + + +#ifndef NRFX_SPIM1_ENABLED +#define NRFX_SPIM1_ENABLED 0 +#endif + +// NRFX_SPIM2_ENABLED - Enable SPIM2 instance + + +#ifndef NRFX_SPIM2_ENABLED +#define NRFX_SPIM2_ENABLED 0 +#endif + +// NRFX_SPIM3_ENABLED - Enable SPIM3 instance + + +#ifndef NRFX_SPIM3_ENABLED +#define NRFX_SPIM3_ENABLED 0 +#endif + +// NRFX_SPIM_EXTENDED_ENABLED - Enable extended SPIM features + + +#ifndef NRFX_SPIM_EXTENDED_ENABLED +#define NRFX_SPIM_EXTENDED_ENABLED 0 +#endif + +// NRFX_SPIM_MISO_PULL_CFG - MISO pin pull configuration. + +// <0=> NRF_GPIO_PIN_NOPULL +// <1=> NRF_GPIO_PIN_PULLDOWN +// <3=> NRF_GPIO_PIN_PULLUP + +#ifndef NRFX_SPIM_MISO_PULL_CFG +#define NRFX_SPIM_MISO_PULL_CFG 1 +#endif + +// NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY +#define NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_SPIM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_SPIM_CONFIG_LOG_ENABLED +#define NRFX_SPIM_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_SPIM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_SPIM_CONFIG_LOG_LEVEL +#define NRFX_SPIM_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_SPIM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_SPIM_CONFIG_INFO_COLOR +#define NRFX_SPIM_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_SPIM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_SPIM_CONFIG_DEBUG_COLOR +#define NRFX_SPIM_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_SPI_ENABLED - nrfx_spi - SPI peripheral driver +//========================================================== +#ifndef NRFX_SPI_ENABLED +#define NRFX_SPI_ENABLED 1 +#endif +// NRFX_SPI0_ENABLED - Enable SPI0 instance + + +#ifndef NRFX_SPI0_ENABLED +#define NRFX_SPI0_ENABLED 0 +#endif + +// NRFX_SPI1_ENABLED - Enable SPI1 instance + + +#ifndef NRFX_SPI1_ENABLED +#define NRFX_SPI1_ENABLED 0 +#endif + +// NRFX_SPI2_ENABLED - Enable SPI2 instance + + +#ifndef NRFX_SPI2_ENABLED +#define NRFX_SPI2_ENABLED 0 +#endif + +// NRFX_SPI_MISO_PULL_CFG - MISO pin pull configuration. + +// <0=> NRF_GPIO_PIN_NOPULL +// <1=> NRF_GPIO_PIN_PULLDOWN +// <3=> NRF_GPIO_PIN_PULLUP + +#ifndef NRFX_SPI_MISO_PULL_CFG +#define NRFX_SPI_MISO_PULL_CFG 1 +#endif + +// NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY +#define NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_SPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_SPI_CONFIG_LOG_ENABLED +#define NRFX_SPI_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_SPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_SPI_CONFIG_LOG_LEVEL +#define NRFX_SPI_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_SPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_SPI_CONFIG_INFO_COLOR +#define NRFX_SPI_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_SPI_CONFIG_DEBUG_COLOR +#define NRFX_SPI_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver +//========================================================== +#ifndef NRFX_UARTE_ENABLED +#define NRFX_UARTE_ENABLED 1 +#endif +// NRFX_UARTE0_ENABLED - Enable UARTE0 instance +#ifndef NRFX_UARTE0_ENABLED +#define NRFX_UARTE0_ENABLED 0 +#endif + +// NRFX_UARTE1_ENABLED - Enable UARTE1 instance +#ifndef NRFX_UARTE1_ENABLED +#define NRFX_UARTE1_ENABLED 0 +#endif + +// NRFX_UARTE_DEFAULT_CONFIG_HWFC - Hardware Flow Control + +// <0=> Disabled +// <1=> Enabled + +#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC +#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0 +#endif + +// NRFX_UARTE_DEFAULT_CONFIG_PARITY - Parity + +// <0=> Excluded +// <14=> Included + +#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY +#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0 +#endif + +// NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE - Default Baudrate + +// <323584=> 1200 baud +// <643072=> 2400 baud +// <1290240=> 4800 baud +// <2576384=> 9600 baud +// <3862528=> 14400 baud +// <5152768=> 19200 baud +// <7716864=> 28800 baud +// <8388608=> 31250 baud +// <10289152=> 38400 baud +// <15007744=> 56000 baud +// <15400960=> 57600 baud +// <20615168=> 76800 baud +// <30801920=> 115200 baud +// <61865984=> 230400 baud +// <67108864=> 250000 baud +// <121634816=> 460800 baud +// <251658240=> 921600 baud +// <268435456=> 1000000 baud + +#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE +#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920 +#endif + +// NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY +#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED +#define NRFX_UARTE_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_UARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL +#define NRFX_UARTE_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_UARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_UARTE_CONFIG_INFO_COLOR +#define NRFX_UARTE_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_UARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR +#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver +//========================================================== +#ifndef NRFX_UART_ENABLED +#define NRFX_UART_ENABLED 1 +#endif +// NRFX_UART0_ENABLED - Enable UART0 instance +#ifndef NRFX_UART0_ENABLED +#define NRFX_UART0_ENABLED 0 +#endif + +// NRFX_UART_DEFAULT_CONFIG_HWFC - Hardware Flow Control + +// <0=> Disabled +// <1=> Enabled + +#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC +#define NRFX_UART_DEFAULT_CONFIG_HWFC 0 +#endif + +// NRFX_UART_DEFAULT_CONFIG_PARITY - Parity + +// <0=> Excluded +// <14=> Included + +#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY +#define NRFX_UART_DEFAULT_CONFIG_PARITY 0 +#endif + +// NRFX_UART_DEFAULT_CONFIG_BAUDRATE - Default Baudrate + +// <323584=> 1200 baud +// <643072=> 2400 baud +// <1290240=> 4800 baud +// <2576384=> 9600 baud +// <3866624=> 14400 baud +// <5152768=> 19200 baud +// <7729152=> 28800 baud +// <8388608=> 31250 baud +// <10309632=> 38400 baud +// <15007744=> 56000 baud +// <15462400=> 57600 baud +// <20615168=> 76800 baud +// <30924800=> 115200 baud +// <61845504=> 230400 baud +// <67108864=> 250000 baud +// <123695104=> 460800 baud +// <247386112=> 921600 baud +// <268435456=> 1000000 baud + +#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE +#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800 +#endif + +// NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY +#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRFX_UART_CONFIG_LOG_ENABLED +#define NRFX_UART_CONFIG_LOG_ENABLED 0 +#endif +// NRFX_UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRFX_UART_CONFIG_LOG_LEVEL +#define NRFX_UART_CONFIG_LOG_LEVEL 3 +#endif + +// NRFX_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_UART_CONFIG_INFO_COLOR +#define NRFX_UART_CONFIG_INFO_COLOR 0 +#endif + +// NRFX_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRFX_UART_CONFIG_DEBUG_COLOR +#define NRFX_UART_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// POWER_ENABLED - nrf_drv_power - POWER peripheral driver - legacy layer +//========================================================== +#ifndef POWER_ENABLED +#define POWER_ENABLED 1 +#endif +// POWER_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef POWER_CONFIG_IRQ_PRIORITY +#define POWER_CONFIG_IRQ_PRIORITY 7 +#endif + +// POWER_CONFIG_DEFAULT_DCDCEN - The default configuration of main DCDC regulator + + +// This settings means only that components for DCDC regulator are installed and it can be enabled. + +#ifndef POWER_CONFIG_DEFAULT_DCDCEN +#define POWER_CONFIG_DEFAULT_DCDCEN 0 +#endif + +// POWER_CONFIG_DEFAULT_DCDCENHV - The default configuration of High Voltage DCDC regulator + + +// This settings means only that components for DCDC regulator are installed and it can be enabled. + +#ifndef POWER_CONFIG_DEFAULT_DCDCENHV +#define POWER_CONFIG_DEFAULT_DCDCENHV 0 +#endif + +// + +// QSPI_ENABLED - nrf_drv_qspi - QSPI peripheral driver - legacy layer +//========================================================== +#ifndef QSPI_ENABLED +#define QSPI_ENABLED 1 +#endif +// QSPI_CONFIG_SCK_DELAY - tSHSL, tWHSL and tSHWL in number of 16 MHz periods (62.5 ns). <0-255> + + +#ifndef QSPI_CONFIG_SCK_DELAY +#define QSPI_CONFIG_SCK_DELAY 1 +#endif + +// QSPI_CONFIG_XIP_OFFSET - Address offset in the external memory for Execute in Place operation. +#ifndef QSPI_CONFIG_XIP_OFFSET +#define QSPI_CONFIG_XIP_OFFSET 0 +#endif + +// QSPI_CONFIG_READOC - Number of data lines and opcode used for reading. + +// <0=> FastRead +// <1=> Read2O +// <2=> Read2IO +// <3=> Read4O +// <4=> Read4IO + +#ifndef QSPI_CONFIG_READOC +#define QSPI_CONFIG_READOC 0 +#endif + +// QSPI_CONFIG_WRITEOC - Number of data lines and opcode used for writing. + +// <0=> PP +// <1=> PP2O +// <2=> PP4O +// <3=> PP4IO + +#ifndef QSPI_CONFIG_WRITEOC +#define QSPI_CONFIG_WRITEOC 0 +#endif + +// QSPI_CONFIG_ADDRMODE - Addressing mode. + +// <0=> 24bit +// <1=> 32bit + +#ifndef QSPI_CONFIG_ADDRMODE +#define QSPI_CONFIG_ADDRMODE 0 +#endif + +// QSPI_CONFIG_MODE - SPI mode. + +// <0=> Mode 0 +// <1=> Mode 1 + +#ifndef QSPI_CONFIG_MODE +#define QSPI_CONFIG_MODE 0 +#endif + +// QSPI_CONFIG_FREQUENCY - Frequency divider. + +// <0=> 32MHz/1 +// <1=> 32MHz/2 +// <2=> 32MHz/3 +// <3=> 32MHz/4 +// <4=> 32MHz/5 +// <5=> 32MHz/6 +// <6=> 32MHz/7 +// <7=> 32MHz/8 +// <8=> 32MHz/9 +// <9=> 32MHz/10 +// <10=> 32MHz/11 +// <11=> 32MHz/12 +// <12=> 32MHz/13 +// <13=> 32MHz/14 +// <14=> 32MHz/15 +// <15=> 32MHz/16 + +#ifndef QSPI_CONFIG_FREQUENCY +#define QSPI_CONFIG_FREQUENCY 15 +#endif + +// QSPI_PIN_SCK - SCK pin value. +#ifndef QSPI_PIN_SCK +#define QSPI_PIN_SCK NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// QSPI_PIN_CSN - CSN pin value. +#ifndef QSPI_PIN_CSN +#define QSPI_PIN_CSN NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// QSPI_PIN_IO0 - IO0 pin value. +#ifndef QSPI_PIN_IO0 +#define QSPI_PIN_IO0 NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// QSPI_PIN_IO1 - IO1 pin value. +#ifndef QSPI_PIN_IO1 +#define QSPI_PIN_IO1 NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// QSPI_PIN_IO2 - IO2 pin value. +#ifndef QSPI_PIN_IO2 +#define QSPI_PIN_IO2 NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// QSPI_PIN_IO3 - IO3 pin value. +#ifndef QSPI_PIN_IO3 +#define QSPI_PIN_IO3 NRF_QSPI_PIN_NOT_CONNECTED +#endif + +// QSPI_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef QSPI_CONFIG_IRQ_PRIORITY +#define QSPI_CONFIG_IRQ_PRIORITY 7 +#endif + +// + +// SPI_ENABLED - nrf_drv_spi - SPI/SPIM peripheral driver - legacy layer +//========================================================== +#ifndef SPI_ENABLED +#define SPI_ENABLED 1 +#endif +// SPI_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef SPI_DEFAULT_CONFIG_IRQ_PRIORITY +#define SPI_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// NRF_SPI_DRV_MISO_PULLUP_CFG - MISO PIN pull-up configuration. + +// <0=> NRF_GPIO_PIN_NOPULL +// <1=> NRF_GPIO_PIN_PULLDOWN +// <3=> NRF_GPIO_PIN_PULLUP + +#ifndef NRF_SPI_DRV_MISO_PULLUP_CFG +#define NRF_SPI_DRV_MISO_PULLUP_CFG 1 +#endif + +// SPI0_ENABLED - Enable SPI0 instance +//========================================================== +#ifndef SPI0_ENABLED +#define SPI0_ENABLED 1 +#endif +// SPI0_USE_EASY_DMA - Use EasyDMA + + +#ifndef SPI0_USE_EASY_DMA +#define SPI0_USE_EASY_DMA 1 +#endif + +// + +// SPI1_ENABLED - Enable SPI1 instance +//========================================================== +#ifndef SPI1_ENABLED +#define SPI1_ENABLED 0 +#endif +// SPI1_USE_EASY_DMA - Use EasyDMA + + +#ifndef SPI1_USE_EASY_DMA +#define SPI1_USE_EASY_DMA 1 +#endif + +// + +// SPI2_ENABLED - Enable SPI2 instance +//========================================================== +#ifndef SPI2_ENABLED +#define SPI2_ENABLED 0 +#endif +// SPI2_USE_EASY_DMA - Use EasyDMA + + +#ifndef SPI2_USE_EASY_DMA +#define SPI2_USE_EASY_DMA 1 +#endif + +// + +// + +// UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer +//========================================================== +#ifndef UART_ENABLED +#define UART_ENABLED 1 +#endif +// UART_DEFAULT_CONFIG_HWFC - Hardware Flow Control + +// <0=> Disabled +// <1=> Enabled + +#ifndef UART_DEFAULT_CONFIG_HWFC +#define UART_DEFAULT_CONFIG_HWFC 0 +#endif + +// UART_DEFAULT_CONFIG_PARITY - Parity + +// <0=> Excluded +// <14=> Included + +#ifndef UART_DEFAULT_CONFIG_PARITY +#define UART_DEFAULT_CONFIG_PARITY 0 +#endif + +// UART_DEFAULT_CONFIG_BAUDRATE - Default Baudrate + +// <323584=> 1200 baud +// <643072=> 2400 baud +// <1290240=> 4800 baud +// <2576384=> 9600 baud +// <3862528=> 14400 baud +// <5152768=> 19200 baud +// <7716864=> 28800 baud +// <10289152=> 38400 baud +// <15400960=> 57600 baud +// <20615168=> 76800 baud +// <30801920=> 115200 baud +// <61865984=> 230400 baud +// <67108864=> 250000 baud +// <121634816=> 460800 baud +// <251658240=> 921600 baud +// <268435456=> 1000000 baud + +#ifndef UART_DEFAULT_CONFIG_BAUDRATE +#define UART_DEFAULT_CONFIG_BAUDRATE 30801920 +#endif + +// UART_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY +#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 7 +#endif + +// UART_EASY_DMA_SUPPORT - Driver supporting EasyDMA + + +#ifndef UART_EASY_DMA_SUPPORT +#define UART_EASY_DMA_SUPPORT 1 +#endif + +// UART_LEGACY_SUPPORT - Driver supporting Legacy mode + + +#ifndef UART_LEGACY_SUPPORT +#define UART_LEGACY_SUPPORT 1 +#endif + +// UART0_ENABLED - Enable UART0 instance +//========================================================== +#ifndef UART0_ENABLED +#define UART0_ENABLED 1 +#endif +// UART0_CONFIG_USE_EASY_DMA - Default setting for using EasyDMA + + +#ifndef UART0_CONFIG_USE_EASY_DMA +#define UART0_CONFIG_USE_EASY_DMA 1 +#endif + +// + +// UART1_ENABLED - Enable UART1 instance +//========================================================== +#ifndef UART1_ENABLED +#define UART1_ENABLED 0 +#endif +// + +// + +// USBD_ENABLED - nrf_drv_usbd - USB driver +//========================================================== +#ifndef USBD_ENABLED +#define USBD_ENABLED 1 +#endif +// USBD_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef USBD_CONFIG_IRQ_PRIORITY +#define USBD_CONFIG_IRQ_PRIORITY 7 +#endif + +// USBD_CONFIG_DMASCHEDULER_MODE - USBD SMA scheduler working scheme + +// <0=> Prioritized access +// <1=> Round Robin + +#ifndef USBD_CONFIG_DMASCHEDULER_MODE +#define USBD_CONFIG_DMASCHEDULER_MODE 0 +#endif + +// + +// +//========================================================== + +// nRF_Libraries + +//========================================================== +// APP_FIFO_ENABLED - app_fifo - Software FIFO implementation + + +#ifndef APP_FIFO_ENABLED +#define APP_FIFO_ENABLED 1 +#endif + +// APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler +//========================================================== +#ifndef APP_SCHEDULER_ENABLED +#define APP_SCHEDULER_ENABLED 1 +#endif +// APP_SCHEDULER_WITH_PAUSE - Enabling pause feature + + +#ifndef APP_SCHEDULER_WITH_PAUSE +#define APP_SCHEDULER_WITH_PAUSE 0 +#endif + +// APP_SCHEDULER_WITH_PROFILER - Enabling scheduler profiling + + +#ifndef APP_SCHEDULER_WITH_PROFILER +#define APP_SCHEDULER_WITH_PROFILER 0 +#endif + +// + +// APP_SDCARD_ENABLED - app_sdcard - SD/MMC card support using SPI +//========================================================== +#ifndef APP_SDCARD_ENABLED +#define APP_SDCARD_ENABLED 1 +#endif +// APP_SDCARD_SPI_INSTANCE - SPI instance used + +// <0=> 0 +// <1=> 1 +// <2=> 2 + +#ifndef APP_SDCARD_SPI_INSTANCE +#define APP_SDCARD_SPI_INSTANCE 0 +#endif + +// APP_SDCARD_FREQ_INIT - SPI frequency + +// <33554432=> 125 kHz +// <67108864=> 250 kHz +// <134217728=> 500 kHz +// <268435456=> 1 MHz +// <536870912=> 2 MHz +// <1073741824=> 4 MHz +// <2147483648=> 8 MHz + +#ifndef APP_SDCARD_FREQ_INIT +#define APP_SDCARD_FREQ_INIT 67108864 +#endif + +// APP_SDCARD_FREQ_DATA - SPI frequency + +// <33554432=> 125 kHz +// <67108864=> 250 kHz +// <134217728=> 500 kHz +// <268435456=> 1 MHz +// <536870912=> 2 MHz +// <1073741824=> 4 MHz +// <2147483648=> 8 MHz + +#ifndef APP_SDCARD_FREQ_DATA +#define APP_SDCARD_FREQ_DATA 1073741824 +#endif + +// + +// APP_TIMER_ENABLED - app_timer - Application timer functionality +//========================================================== +#ifndef APP_TIMER_ENABLED +#define APP_TIMER_ENABLED 1 +#endif +// APP_TIMER_CONFIG_RTC_FREQUENCY - Configure RTC prescaler. + +// <0=> 32768 Hz +// <1=> 16384 Hz +// <3=> 8192 Hz +// <7=> 4096 Hz +// <15=> 2048 Hz +// <31=> 1024 Hz + +#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY +#define APP_TIMER_CONFIG_RTC_FREQUENCY 0 +#endif + +// APP_TIMER_CONFIG_IRQ_PRIORITY - Interrupt priority + + +// Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice +// <0=> 0 (highest) +// <1=> 1 +// <2=> 2 +// <3=> 3 +// <4=> 4 +// <5=> 5 +// <6=> 6 +// <7=> 7 + +#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY +#define APP_TIMER_CONFIG_IRQ_PRIORITY 7 +#endif + +// APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue. +// Size of the queue depends on how many timers are used +// in the system, how often timers are started and overall +// system latency. If queue size is too small app_timer calls +// will fail. + +#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE +#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10 +#endif + +// APP_TIMER_CONFIG_USE_SCHEDULER - Enable scheduling app_timer events to app_scheduler + + +#ifndef APP_TIMER_CONFIG_USE_SCHEDULER +#define APP_TIMER_CONFIG_USE_SCHEDULER 0 +#endif + +// APP_TIMER_KEEPS_RTC_ACTIVE - Enable RTC always on + + +// If option is enabled RTC is kept running even if there is no active timers. +// This option can be used when app_timer is used for timestamping. + +#ifndef APP_TIMER_KEEPS_RTC_ACTIVE +#define APP_TIMER_KEEPS_RTC_ACTIVE 0 +#endif + +// App Timer Legacy configuration - Legacy configuration. + +//========================================================== +// APP_TIMER_WITH_PROFILER - Enable app_timer profiling + + +#ifndef APP_TIMER_WITH_PROFILER +#define APP_TIMER_WITH_PROFILER 0 +#endif + +// APP_TIMER_CONFIG_SWI_NUMBER - Configure SWI instance used. + + +#ifndef APP_TIMER_CONFIG_SWI_NUMBER +#define APP_TIMER_CONFIG_SWI_NUMBER 0 +#endif + +// +//========================================================== + +// + +// APP_UART_ENABLED - app_uart - UART driver +//========================================================== +#ifndef APP_UART_ENABLED +#define APP_UART_ENABLED 1 +#endif +// APP_UART_DRIVER_INSTANCE - UART instance used + +// <0=> 0 + +#ifndef APP_UART_DRIVER_INSTANCE +#define APP_UART_DRIVER_INSTANCE 0 +#endif + +// + +// APP_USBD_ENABLED - app_usbd - USB Device library +//========================================================== +#ifndef APP_USBD_ENABLED +#define APP_USBD_ENABLED 1 +#endif +// APP_USBD_VID - Vendor ID + +// Vendor ID ordered from USB IF: http://www.usb.org/developers/vendor/ +#ifndef APP_USBD_VID +#define APP_USBD_VID 0x1915 +#endif + +// APP_USBD_PID - Product ID + +// Selected Product ID +#ifndef APP_USBD_PID +#define APP_USBD_PID 0x520D +#endif + +// APP_USBD_DEVICE_VER_MAJOR - Device version, major part <0-99> + + +// Device version, will be converted automatically to BCD notation. Use just decimal values. + +#ifndef APP_USBD_DEVICE_VER_MAJOR +#define APP_USBD_DEVICE_VER_MAJOR 1 +#endif + +// APP_USBD_DEVICE_VER_MINOR - Device version, minor part <0-99> + + +// Device version, will be converted automatically to BCD notation. Use just decimal values. + +#ifndef APP_USBD_DEVICE_VER_MINOR +#define APP_USBD_DEVICE_VER_MINOR 0 +#endif + +// APP_USBD_CONFIG_SELF_POWERED - Self powered + + +#ifndef APP_USBD_CONFIG_SELF_POWERED +#define APP_USBD_CONFIG_SELF_POWERED 1 +#endif + +// APP_USBD_CONFIG_MAX_POWER - MaxPower field in configuration descriptor in milliamps <0-500> + + +#ifndef APP_USBD_CONFIG_MAX_POWER +#define APP_USBD_CONFIG_MAX_POWER 500 +#endif + +// APP_USBD_CONFIG_POWER_EVENTS_PROCESS - Process power events + + +// Enable processing power events in USB event handler. + +#ifndef APP_USBD_CONFIG_POWER_EVENTS_PROCESS +#define APP_USBD_CONFIG_POWER_EVENTS_PROCESS 1 +#endif + +// APP_USBD_CONFIG_EVENT_QUEUE_ENABLE - Enable event queue + +// This is the default configuration when all the events are placed into internal queue. +// Disable it when external queue is used like app_scheduler or if you wish to process all events inside interrupts. +// Processing all events from the interrupt level adds requirement not to call any functions that modifies the USBD library state from the context higher than USB interrupt context. +// Functions that modify USBD state are functions for sleep, wakeup, start, stop, enable and disable. +//========================================================== +#ifndef APP_USBD_CONFIG_EVENT_QUEUE_ENABLE +#define APP_USBD_CONFIG_EVENT_QUEUE_ENABLE 1 +#endif +// APP_USBD_CONFIG_EVENT_QUEUE_SIZE - The size of event queue <16-64> + + +// The size of the queue for the events that would be processed in the main loop. + +#ifndef APP_USBD_CONFIG_EVENT_QUEUE_SIZE +#define APP_USBD_CONFIG_EVENT_QUEUE_SIZE 32 +#endif + +// APP_USBD_CONFIG_SOF_HANDLING_MODE - Change SOF events handling mode. + + +// Normal queue - SOF events are pushed normally into event queue. +// Compress queue - SOF events are counted and binded with other events or executed when queue is empty. +// This prevents queue from filling with SOF events. +// Interrupt - SOF events are processed in interrupt. +// <0=> Normal queue +// <1=> Compress queue +// <2=> Interrupt + +#ifndef APP_USBD_CONFIG_SOF_HANDLING_MODE +#define APP_USBD_CONFIG_SOF_HANDLING_MODE 1 +#endif + +// + +// APP_USBD_CONFIG_SOF_TIMESTAMP_PROVIDE - Provide a function that generates timestamps for logs based on the current SOF + + +// The function app_usbd_sof_timestamp_get will be implemented if the logger is enabled. +// Use it when initializing the logger. +// SOF processing will be always enabled when this configuration parameter is active. +// Notice that this option is configured outside of APP_USBD_CONFIG_LOG_ENABLED. +// This means that it will work even if the logging in this very module is disabled. + +#ifndef APP_USBD_CONFIG_SOF_TIMESTAMP_PROVIDE +#define APP_USBD_CONFIG_SOF_TIMESTAMP_PROVIDE 1 +#endif + +// APP_USBD_CONFIG_LOG_ENABLED - Enable logging in the module +//========================================================== +#ifndef APP_USBD_CONFIG_LOG_ENABLED +#define APP_USBD_CONFIG_LOG_ENABLED 0 +#endif +// APP_USBD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_CONFIG_LOG_LEVEL +#define APP_USBD_CONFIG_LOG_LEVEL 3 +#endif + +// APP_USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CONFIG_INFO_COLOR +#define APP_USBD_CONFIG_INFO_COLOR 0 +#endif + +// APP_USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CONFIG_DEBUG_COLOR +#define APP_USBD_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// + +// APP_USBD_MSC_ENABLED - app_usbd_msc - USB MSC class + + +#ifndef APP_USBD_MSC_ENABLED +#define APP_USBD_MSC_ENABLED 1 +#endif + +// HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release +//========================================================== +#ifndef HARDFAULT_HANDLER_ENABLED +#define HARDFAULT_HANDLER_ENABLED 1 +#endif +// HARDFAULT_HANDLER_GDB_PSP_BACKTRACE - Bypass the GDB problem with multiple stack pointers backtrace + + +// There is a known bug in GDB which causes it to incorrectly backtrace the code +// when multiple stack pointers are used (main and process stack pointers). +// This option enables the fix for that problem and allows to see the proper backtrace info. +// It makes it possible to trace the code to the exact point where a HardFault appeared. +// This option requires additional commands and may temporarily switch MSP stack to store data on PSP space. +// This is an optional parameter - enable it while debugging. +// Before a HardFault handler exits, the stack will be reverted to its previous value. + +#ifndef HARDFAULT_HANDLER_GDB_PSP_BACKTRACE +#define HARDFAULT_HANDLER_GDB_PSP_BACKTRACE 1 +#endif + +// + +// NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module +//========================================================== +#ifndef NRF_BALLOC_ENABLED +#define NRF_BALLOC_ENABLED 1 +#endif +// NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module. +//========================================================== +#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED +#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0 +#endif +// NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard. <0-255> + + +#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS +#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1 +#endif + +// NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard. <0-255> + + +#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS +#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1 +#endif + +// NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED - Enables basic checks in this module. + + +#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED +#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0 +#endif + +// NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED - Enables double memory free check in this module. + + +#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED +#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0 +#endif + +// NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED - Enables free memory corruption check in this module. + + +#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED +#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0 +#endif + +// NRF_BALLOC_CLI_CMDS - Enable CLI commands specific to the module + + +#ifndef NRF_BALLOC_CLI_CMDS +#define NRF_BALLOC_CLI_CMDS 0 +#endif + +// + +// + +// NRF_FPRINTF_ENABLED - nrf_fprintf - fprintf function. + + +#ifndef NRF_FPRINTF_ENABLED +#define NRF_FPRINTF_ENABLED 1 +#endif + +// NRF_MEMOBJ_ENABLED - nrf_memobj - Linked memory allocator module + + +#ifndef NRF_MEMOBJ_ENABLED +#define NRF_MEMOBJ_ENABLED 1 +#endif + +// NRF_STRERROR_ENABLED - nrf_strerror - Library for converting error code to string. + + +#ifndef NRF_STRERROR_ENABLED +#define NRF_STRERROR_ENABLED 1 +#endif + +// app_button - buttons handling module + +//========================================================== +// BUTTON_ENABLED - Enables Button module + + +#ifndef BUTTON_ENABLED +#define BUTTON_ENABLED 1 +#endif + +// BUTTON_HIGH_ACCURACY_ENABLED - Enables GPIOTE high accuracy for buttons + + +#ifndef BUTTON_HIGH_ACCURACY_ENABLED +#define BUTTON_HIGH_ACCURACY_ENABLED 0 +#endif + +// +//========================================================== + +// +//========================================================== + +// nRF_Log + +//========================================================== +// NRF_LOG_BACKEND_RTT_ENABLED - nrf_log_backend_rtt - Log RTT backend +//========================================================== +#ifndef NRF_LOG_BACKEND_RTT_ENABLED +#define NRF_LOG_BACKEND_RTT_ENABLED 0 +#endif +// NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. +// Size of the buffer is a trade-off between RAM usage and processing. +// if buffer is smaller then strings will often be fragmented. +// It is recommended to use size which will fit typical log and only the +// longer one will be fragmented. + +#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE +#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 64 +#endif + +// NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS - Period before retrying writing to RTT +#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS +#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 1 +#endif + +// NRF_LOG_BACKEND_RTT_TX_RETRY_CNT - Writing to RTT retries. +// If RTT fails to accept any new data after retries +// module assumes that host is not active and on next +// request it will perform only one write attempt. +// On successful writing, module assumes that host is active +// and scheme with retry is applied again. + +#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT +#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 3 +#endif + +// + +// NRF_LOG_BACKEND_UART_ENABLED - nrf_log_backend_uart - Log UART backend +//========================================================== +#ifndef NRF_LOG_BACKEND_UART_ENABLED +#define NRF_LOG_BACKEND_UART_ENABLED 1 +#endif +// NRF_LOG_BACKEND_UART_TX_PIN - UART TX pin +#ifndef NRF_LOG_BACKEND_UART_TX_PIN +#define NRF_LOG_BACKEND_UART_TX_PIN 6 +#endif + +// NRF_LOG_BACKEND_UART_BAUDRATE - Default Baudrate + +// <323584=> 1200 baud +// <643072=> 2400 baud +// <1290240=> 4800 baud +// <2576384=> 9600 baud +// <3862528=> 14400 baud +// <5152768=> 19200 baud +// <7716864=> 28800 baud +// <10289152=> 38400 baud +// <15400960=> 57600 baud +// <20615168=> 76800 baud +// <30801920=> 115200 baud +// <61865984=> 230400 baud +// <67108864=> 250000 baud +// <121634816=> 460800 baud +// <251658240=> 921600 baud +// <268435456=> 1000000 baud + +#ifndef NRF_LOG_BACKEND_UART_BAUDRATE +#define NRF_LOG_BACKEND_UART_BAUDRATE 30801920 +#endif + +// NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE - Size of buffer for partially processed strings. +// Size of the buffer is a trade-off between RAM usage and processing. +// if buffer is smaller then strings will often be fragmented. +// It is recommended to use size which will fit typical log and only the +// longer one will be fragmented. + +#ifndef NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE +#define NRF_LOG_BACKEND_UART_TEMP_BUFFER_SIZE 64 +#endif + +// + +// NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED - nrf_log_str_formatter - Log string formatter + + +#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED +#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1 +#endif + +// nrf_log - Logger + +//========================================================== +// NRF_LOG_ENABLED - Logging module for nRF5 SDK +//========================================================== +#ifndef NRF_LOG_ENABLED +#define NRF_LOG_ENABLED 1 +#endif +// NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string +//========================================================== +#ifndef NRF_LOG_USES_COLORS +#define NRF_LOG_USES_COLORS 0 +#endif +// NRF_LOG_COLOR_DEFAULT - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_COLOR_DEFAULT +#define NRF_LOG_COLOR_DEFAULT 0 +#endif + +// NRF_LOG_ERROR_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_ERROR_COLOR +#define NRF_LOG_ERROR_COLOR 2 +#endif + +// NRF_LOG_WARNING_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LOG_WARNING_COLOR +#define NRF_LOG_WARNING_COLOR 4 +#endif + +// + +// NRF_LOG_DEFAULT_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_LOG_DEFAULT_LEVEL +#define NRF_LOG_DEFAULT_LEVEL 3 +#endif + +// NRF_LOG_DEFERRED - Enable deffered logger. + + +// Log data is buffered and can be processed in idle. + +#ifndef NRF_LOG_DEFERRED +#define NRF_LOG_DEFERRED 1 +#endif + +// NRF_LOG_BUFSIZE - Size of the buffer for storing logs (in bytes). + + +// Must be power of 2 and multiple of 4. +// If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum. +// <128=> 128 +// <256=> 256 +// <512=> 512 +// <1024=> 1024 +// <2048=> 2048 +// <4096=> 4096 +// <8192=> 8192 +// <16384=> 16384 + +#ifndef NRF_LOG_BUFSIZE +#define NRF_LOG_BUFSIZE 1024 +#endif + +// NRF_LOG_ALLOW_OVERFLOW - Configures behavior when circular buffer is full. + + +// If set then oldest logs are overwritten. Otherwise a +// marker is injected informing about overflow. + +#ifndef NRF_LOG_ALLOW_OVERFLOW +#define NRF_LOG_ALLOW_OVERFLOW 1 +#endif + +// NRF_LOG_USES_TIMESTAMP - Enable timestamping + +// Function for getting the timestamp is provided by the user +//========================================================== +#ifndef NRF_LOG_USES_TIMESTAMP +#define NRF_LOG_USES_TIMESTAMP 1 +#endif +// NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) +#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY +#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 32768 +#endif + +// + +// NRF_LOG_FILTERS_ENABLED - Enable dynamic filtering of logs. + + +#ifndef NRF_LOG_FILTERS_ENABLED +#define NRF_LOG_FILTERS_ENABLED 0 +#endif + +// NRF_LOG_CLI_CMDS - Enable CLI commands for the module. + + +#ifndef NRF_LOG_CLI_CMDS +#define NRF_LOG_CLI_CMDS 0 +#endif + +// Log message pool - Configuration of log message pool + +//========================================================== +// NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects. +// If a small value is set, then performance of logs processing +// is degraded because data is fragmented. Bigger value impacts +// RAM memory utilization. The size is set to fit a message with +// a timestamp and up to 2 arguments in a single memory object. + +#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE +#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20 +#endif + +// NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects +// If a small value is set, then it may lead to a deadlock +// in certain cases if backend has high latency and holds +// multiple messages for long time. Bigger value impacts +// RAM memory usage. + +#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT +#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8 +#endif + +// +//========================================================== + +// + +// nrf_log module configuration + +//========================================================== +// nrf_log in nRF_Core + +//========================================================== +// NRF_MPU_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_MPU_CONFIG_LOG_ENABLED +#define NRF_MPU_CONFIG_LOG_ENABLED 0 +#endif +// NRF_MPU_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_MPU_CONFIG_LOG_LEVEL +#define NRF_MPU_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_MPU_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MPU_CONFIG_INFO_COLOR +#define NRF_MPU_CONFIG_INFO_COLOR 0 +#endif + +// NRF_MPU_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MPU_CONFIG_DEBUG_COLOR +#define NRF_MPU_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED +#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0 +#endif +// NRF_STACK_GUARD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL +#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_STACK_GUARD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR +#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0 +#endif + +// NRF_STACK_GUARD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR +#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED +#define TASK_MANAGER_CONFIG_LOG_ENABLED 0 +#endif +// TASK_MANAGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL +#define TASK_MANAGER_CONFIG_LOG_LEVEL 3 +#endif + +// TASK_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TASK_MANAGER_CONFIG_INFO_COLOR +#define TASK_MANAGER_CONFIG_INFO_COLOR 0 +#endif + +// TASK_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR +#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// +//========================================================== + +// nrf_log in nRF_Drivers + +//========================================================== +// CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef CLOCK_CONFIG_LOG_ENABLED +#define CLOCK_CONFIG_LOG_ENABLED 0 +#endif +// CLOCK_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef CLOCK_CONFIG_LOG_LEVEL +#define CLOCK_CONFIG_LOG_LEVEL 3 +#endif + +// CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef CLOCK_CONFIG_INFO_COLOR +#define CLOCK_CONFIG_INFO_COLOR 0 +#endif + +// CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef CLOCK_CONFIG_DEBUG_COLOR +#define CLOCK_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// COMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef COMP_CONFIG_LOG_ENABLED +#define COMP_CONFIG_LOG_ENABLED 0 +#endif +// COMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef COMP_CONFIG_LOG_LEVEL +#define COMP_CONFIG_LOG_LEVEL 3 +#endif + +// COMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMP_CONFIG_INFO_COLOR +#define COMP_CONFIG_INFO_COLOR 0 +#endif + +// COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef COMP_CONFIG_DEBUG_COLOR +#define COMP_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef GPIOTE_CONFIG_LOG_ENABLED +#define GPIOTE_CONFIG_LOG_ENABLED 0 +#endif +// GPIOTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef GPIOTE_CONFIG_LOG_LEVEL +#define GPIOTE_CONFIG_LOG_LEVEL 3 +#endif + +// GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef GPIOTE_CONFIG_INFO_COLOR +#define GPIOTE_CONFIG_INFO_COLOR 0 +#endif + +// GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef GPIOTE_CONFIG_DEBUG_COLOR +#define GPIOTE_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef LPCOMP_CONFIG_LOG_ENABLED +#define LPCOMP_CONFIG_LOG_ENABLED 0 +#endif +// LPCOMP_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef LPCOMP_CONFIG_LOG_LEVEL +#define LPCOMP_CONFIG_LOG_LEVEL 3 +#endif + +// LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef LPCOMP_CONFIG_INFO_COLOR +#define LPCOMP_CONFIG_INFO_COLOR 0 +#endif + +// LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef LPCOMP_CONFIG_DEBUG_COLOR +#define LPCOMP_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// PDM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PDM_CONFIG_LOG_ENABLED +#define PDM_CONFIG_LOG_ENABLED 0 +#endif +// PDM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PDM_CONFIG_LOG_LEVEL +#define PDM_CONFIG_LOG_LEVEL 3 +#endif + +// PDM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PDM_CONFIG_INFO_COLOR +#define PDM_CONFIG_INFO_COLOR 0 +#endif + +// PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PDM_CONFIG_DEBUG_COLOR +#define PDM_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// PPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PPI_CONFIG_LOG_ENABLED +#define PPI_CONFIG_LOG_ENABLED 0 +#endif +// PPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PPI_CONFIG_LOG_LEVEL +#define PPI_CONFIG_LOG_LEVEL 3 +#endif + +// PPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PPI_CONFIG_INFO_COLOR +#define PPI_CONFIG_INFO_COLOR 0 +#endif + +// PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PPI_CONFIG_DEBUG_COLOR +#define PPI_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// PWM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef PWM_CONFIG_LOG_ENABLED +#define PWM_CONFIG_LOG_ENABLED 0 +#endif +// PWM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef PWM_CONFIG_LOG_LEVEL +#define PWM_CONFIG_LOG_LEVEL 3 +#endif + +// PWM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PWM_CONFIG_INFO_COLOR +#define PWM_CONFIG_INFO_COLOR 0 +#endif + +// PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef PWM_CONFIG_DEBUG_COLOR +#define PWM_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// QDEC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef QDEC_CONFIG_LOG_ENABLED +#define QDEC_CONFIG_LOG_ENABLED 0 +#endif +// QDEC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef QDEC_CONFIG_LOG_LEVEL +#define QDEC_CONFIG_LOG_LEVEL 3 +#endif + +// QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef QDEC_CONFIG_INFO_COLOR +#define QDEC_CONFIG_INFO_COLOR 0 +#endif + +// QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef QDEC_CONFIG_DEBUG_COLOR +#define QDEC_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// RNG_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef RNG_CONFIG_LOG_ENABLED +#define RNG_CONFIG_LOG_ENABLED 0 +#endif +// RNG_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef RNG_CONFIG_LOG_LEVEL +#define RNG_CONFIG_LOG_LEVEL 3 +#endif + +// RNG_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RNG_CONFIG_INFO_COLOR +#define RNG_CONFIG_INFO_COLOR 0 +#endif + +// RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RNG_CONFIG_DEBUG_COLOR +#define RNG_CONFIG_DEBUG_COLOR 0 +#endif + +// RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED - Enables logging of random numbers. + + +#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED +#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0 +#endif + +// + +// RTC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef RTC_CONFIG_LOG_ENABLED +#define RTC_CONFIG_LOG_ENABLED 0 +#endif +// RTC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef RTC_CONFIG_LOG_LEVEL +#define RTC_CONFIG_LOG_LEVEL 3 +#endif + +// RTC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RTC_CONFIG_INFO_COLOR +#define RTC_CONFIG_INFO_COLOR 0 +#endif + +// RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef RTC_CONFIG_DEBUG_COLOR +#define RTC_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// SAADC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SAADC_CONFIG_LOG_ENABLED +#define SAADC_CONFIG_LOG_ENABLED 0 +#endif +// SAADC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SAADC_CONFIG_LOG_LEVEL +#define SAADC_CONFIG_LOG_LEVEL 3 +#endif + +// SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SAADC_CONFIG_INFO_COLOR +#define SAADC_CONFIG_INFO_COLOR 0 +#endif + +// SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SAADC_CONFIG_DEBUG_COLOR +#define SAADC_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// SPIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SPIS_CONFIG_LOG_ENABLED +#define SPIS_CONFIG_LOG_ENABLED 0 +#endif +// SPIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SPIS_CONFIG_LOG_LEVEL +#define SPIS_CONFIG_LOG_LEVEL 3 +#endif + +// SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPIS_CONFIG_INFO_COLOR +#define SPIS_CONFIG_INFO_COLOR 0 +#endif + +// SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPIS_CONFIG_DEBUG_COLOR +#define SPIS_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// SPI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SPI_CONFIG_LOG_ENABLED +#define SPI_CONFIG_LOG_ENABLED 0 +#endif +// SPI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SPI_CONFIG_LOG_LEVEL +#define SPI_CONFIG_LOG_LEVEL 3 +#endif + +// SPI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPI_CONFIG_INFO_COLOR +#define SPI_CONFIG_INFO_COLOR 0 +#endif + +// SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SPI_CONFIG_DEBUG_COLOR +#define SPI_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TIMER_CONFIG_LOG_ENABLED +#define TIMER_CONFIG_LOG_ENABLED 0 +#endif +// TIMER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TIMER_CONFIG_LOG_LEVEL +#define TIMER_CONFIG_LOG_LEVEL 3 +#endif + +// TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TIMER_CONFIG_INFO_COLOR +#define TIMER_CONFIG_INFO_COLOR 0 +#endif + +// TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TIMER_CONFIG_DEBUG_COLOR +#define TIMER_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// TWIS_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TWIS_CONFIG_LOG_ENABLED +#define TWIS_CONFIG_LOG_ENABLED 0 +#endif +// TWIS_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TWIS_CONFIG_LOG_LEVEL +#define TWIS_CONFIG_LOG_LEVEL 3 +#endif + +// TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWIS_CONFIG_INFO_COLOR +#define TWIS_CONFIG_INFO_COLOR 0 +#endif + +// TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWIS_CONFIG_DEBUG_COLOR +#define TWIS_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// TWI_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef TWI_CONFIG_LOG_ENABLED +#define TWI_CONFIG_LOG_ENABLED 0 +#endif +// TWI_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef TWI_CONFIG_LOG_LEVEL +#define TWI_CONFIG_LOG_LEVEL 3 +#endif + +// TWI_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWI_CONFIG_INFO_COLOR +#define TWI_CONFIG_INFO_COLOR 0 +#endif + +// TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef TWI_CONFIG_DEBUG_COLOR +#define TWI_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef UART_CONFIG_LOG_ENABLED +#define UART_CONFIG_LOG_ENABLED 0 +#endif +// UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef UART_CONFIG_LOG_LEVEL +#define UART_CONFIG_LOG_LEVEL 3 +#endif + +// UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef UART_CONFIG_INFO_COLOR +#define UART_CONFIG_INFO_COLOR 0 +#endif + +// UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef UART_CONFIG_DEBUG_COLOR +#define UART_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// USBD_CONFIG_LOG_ENABLED - Enable logging in the module +//========================================================== +#ifndef USBD_CONFIG_LOG_ENABLED +#define USBD_CONFIG_LOG_ENABLED 0 +#endif +// USBD_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef USBD_CONFIG_LOG_LEVEL +#define USBD_CONFIG_LOG_LEVEL 3 +#endif + +// USBD_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef USBD_CONFIG_INFO_COLOR +#define USBD_CONFIG_INFO_COLOR 0 +#endif + +// USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef USBD_CONFIG_DEBUG_COLOR +#define USBD_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// WDT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef WDT_CONFIG_LOG_ENABLED +#define WDT_CONFIG_LOG_ENABLED 0 +#endif +// WDT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef WDT_CONFIG_LOG_LEVEL +#define WDT_CONFIG_LOG_LEVEL 3 +#endif + +// WDT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef WDT_CONFIG_INFO_COLOR +#define WDT_CONFIG_INFO_COLOR 0 +#endif + +// WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef WDT_CONFIG_DEBUG_COLOR +#define WDT_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// +//========================================================== + +// nrf_log in nRF_Libraries + +//========================================================== +// APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_TIMER_CONFIG_LOG_ENABLED +#define APP_TIMER_CONFIG_LOG_ENABLED 0 +#endif +// APP_TIMER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_TIMER_CONFIG_LOG_LEVEL +#define APP_TIMER_CONFIG_LOG_LEVEL 3 +#endif + +// APP_TIMER_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. + + +// If module generates a lot of logs, initial log level can +// be decreased to prevent flooding. Severity level can be +// increased on instance basis. +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL +#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3 +#endif + +// APP_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_TIMER_CONFIG_INFO_COLOR +#define APP_TIMER_CONFIG_INFO_COLOR 0 +#endif + +// APP_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_TIMER_CONFIG_DEBUG_COLOR +#define APP_TIMER_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED +#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0 +#endif +// APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL +#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3 +#endif + +// APP_USBD_CDC_ACM_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR +#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0 +#endif + +// APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR +#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED +#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0 +#endif +// APP_USBD_DUMMY_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL +#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3 +#endif + +// APP_USBD_DUMMY_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR +#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0 +#endif + +// APP_USBD_DUMMY_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR +#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED +#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0 +#endif +// APP_USBD_MSC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL +#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3 +#endif + +// APP_USBD_MSC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR +#define APP_USBD_MSC_CONFIG_INFO_COLOR 0 +#endif + +// APP_USBD_MSC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR +#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0 +#endif +// APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3 +#endif + +// APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0 +#endif + +// APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR +#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED +#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0 +#endif +// NRF_ATFIFO_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL +#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL +#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3 +#endif + +// NRF_ATFIFO_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR +#define NRF_ATFIFO_CONFIG_INFO_COLOR 0 +#endif + +// NRF_ATFIFO_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR +#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED +#define NRF_BALLOC_CONFIG_LOG_ENABLED 0 +#endif +// NRF_BALLOC_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL +#define NRF_BALLOC_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled. + + +// If module generates a lot of logs, initial log level can +// be decreased to prevent flooding. Severity level can be +// increased on instance basis. +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL +#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3 +#endif + +// NRF_BALLOC_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_BALLOC_CONFIG_INFO_COLOR +#define NRF_BALLOC_CONFIG_INFO_COLOR 0 +#endif + +// NRF_BALLOC_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR +#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED +#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0 +#endif +// NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL +#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_CLI_BLE_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR +#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0 +#endif + +// NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR +#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED +#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0 +#endif +// NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL +#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR +#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0 +#endif + +// NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR +#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED +#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0 +#endif +// NRF_CLI_UART_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL +#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_CLI_UART_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR +#define NRF_CLI_UART_CONFIG_INFO_COLOR 0 +#endif + +// NRF_CLI_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR +#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED +#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0 +#endif +// NRF_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL +#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR +#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0 +#endif + +// NRF_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR +#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED +#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0 +#endif +// NRF_MEMOBJ_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL +#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_MEMOBJ_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR +#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0 +#endif + +// NRF_MEMOBJ_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR +#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED +#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0 +#endif +// NRF_PWR_MGMT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL +#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_PWR_MGMT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR +#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0 +#endif + +// NRF_PWR_MGMT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR +#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED +#define NRF_QUEUE_CONFIG_LOG_ENABLED 0 +#endif +// NRF_QUEUE_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL +#define NRF_QUEUE_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL +#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3 +#endif + +// NRF_QUEUE_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_QUEUE_CONFIG_INFO_COLOR +#define NRF_QUEUE_CONFIG_INFO_COLOR 0 +#endif + +// NRF_QUEUE_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR +#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module. +//========================================================== +#ifndef NRF_SDH_ANT_LOG_ENABLED +#define NRF_SDH_ANT_LOG_ENABLED 0 +#endif +// NRF_SDH_ANT_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_ANT_LOG_LEVEL +#define NRF_SDH_ANT_LOG_LEVEL 3 +#endif + +// NRF_SDH_ANT_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_ANT_INFO_COLOR +#define NRF_SDH_ANT_INFO_COLOR 0 +#endif + +// NRF_SDH_ANT_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_ANT_DEBUG_COLOR +#define NRF_SDH_ANT_DEBUG_COLOR 0 +#endif + +// + +// NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module. +//========================================================== +#ifndef NRF_SDH_BLE_LOG_ENABLED +#define NRF_SDH_BLE_LOG_ENABLED 0 +#endif +// NRF_SDH_BLE_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_BLE_LOG_LEVEL +#define NRF_SDH_BLE_LOG_LEVEL 3 +#endif + +// NRF_SDH_BLE_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_BLE_INFO_COLOR +#define NRF_SDH_BLE_INFO_COLOR 0 +#endif + +// NRF_SDH_BLE_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_BLE_DEBUG_COLOR +#define NRF_SDH_BLE_DEBUG_COLOR 0 +#endif + +// + +// NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module. +//========================================================== +#ifndef NRF_SDH_LOG_ENABLED +#define NRF_SDH_LOG_ENABLED 0 +#endif +// NRF_SDH_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_LOG_LEVEL +#define NRF_SDH_LOG_LEVEL 3 +#endif + +// NRF_SDH_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_INFO_COLOR +#define NRF_SDH_INFO_COLOR 0 +#endif + +// NRF_SDH_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_DEBUG_COLOR +#define NRF_SDH_DEBUG_COLOR 0 +#endif + +// + +// NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module. +//========================================================== +#ifndef NRF_SDH_SOC_LOG_ENABLED +#define NRF_SDH_SOC_LOG_ENABLED 0 +#endif +// NRF_SDH_SOC_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SDH_SOC_LOG_LEVEL +#define NRF_SDH_SOC_LOG_LEVEL 3 +#endif + +// NRF_SDH_SOC_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_SOC_INFO_COLOR +#define NRF_SDH_SOC_INFO_COLOR 0 +#endif + +// NRF_SDH_SOC_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SDH_SOC_DEBUG_COLOR +#define NRF_SDH_SOC_DEBUG_COLOR 0 +#endif + +// + +// NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED +#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0 +#endif +// NRF_SORTLIST_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL +#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_SORTLIST_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR +#define NRF_SORTLIST_CONFIG_INFO_COLOR 0 +#endif + +// NRF_SORTLIST_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR +#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED +#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0 +#endif +// NRF_TWI_SENSOR_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL +#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3 +#endif + +// NRF_TWI_SENSOR_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR +#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0 +#endif + +// NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR +#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// +//========================================================== + +// nrf_log in nRF_Serialization + +//========================================================== +// SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module. +//========================================================== +#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED +#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0 +#endif +// SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL - Default Severity level + +// <0=> Off +// <1=> Error +// <2=> Warning +// <3=> Info +// <4=> Debug + +#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL +#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3 +#endif + +// SER_HAL_TRANSPORT_CONFIG_INFO_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR +#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0 +#endif + +// SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR - ANSI escape code prefix. + +// <0=> Default +// <1=> Black +// <2=> Red +// <3=> Green +// <4=> Yellow +// <5=> Blue +// <6=> Magenta +// <7=> Cyan +// <8=> White + +#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR +#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0 +#endif + +// + +// +//========================================================== + +// +//========================================================== + +// +//========================================================== + +// +//========================================================== + +// nRF_Segger_RTT + +//========================================================== +// segger_rtt - SEGGER RTT + +//========================================================== +// SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer. +// Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE +// or this value is actually used. It depends on which one is bigger. + +#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP +#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512 +#endif + +// SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Size of upstream buffer. +#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS +#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 2 +#endif + +// SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of upstream buffer. +#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN +#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16 +#endif + +// SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Size of upstream buffer. +#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS +#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2 +#endif + +// SEGGER_RTT_CONFIG_DEFAULT_MODE - RTT behavior if the buffer is full. + + +// The following modes are supported: +// - SKIP - Do not block, output nothing. +// - TRIM - Do not block, output as much as fits. +// - BLOCK - Wait until there is space in the buffer. +// <0=> SKIP +// <1=> TRIM +// <2=> BLOCK_IF_FIFO_FULL + +#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE +#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0 +#endif + +// +//========================================================== + +// +//========================================================== + +// <<< end of configuration section >>> +#endif //SDK_CONFIG_H + -- cgit v1.2.3