/** * Copyright (c) 2015 - 2018, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /** * @file * @defgroup ant_bpwr Bicycle Power profile * @{ * @ingroup ant_sdk_profiles * @brief This module implements the Bicycle Power profile. * */ #ifndef ANT_BICYCLE_POWER_H__ #define ANT_BICYCLE_POWER_H__ #include #include #include "ant_parameters.h" #include "nrf_sdh_ant.h" #include "ant_channel_config.h" #include "ant_bpwr_pages.h" #include "sdk_errors.h" #define BPWR_DEVICE_TYPE 0x0Bu ///< Device type reserved for ANT+ Bicycle Power. #define BPWR_ANTPLUS_RF_FREQ 0x39u ///< Frequency, decimal 57 (2457 MHz). #define BPWR_MSG_PERIOD 8182u ///< Message period, decimal 8182 (4.0049 Hz). #define BPWR_EXT_ASSIGN 0x00 ///< ANT ext assign (see Ext. Assign Channel Parameters in ant_parameters.h: @ref ant_parameters). #define BPWR_DISP_CHANNEL_TYPE CHANNEL_TYPE_SLAVE ///< Display Bicycle Power channel type. #define BPWR_SENS_CHANNEL_TYPE CHANNEL_TYPE_MASTER ///< Sensor Bicycle Power channel type. #define BPWR_CALIBRATION_TIMOUT_S 5u ///< Time-out for responding to calibration callback (s). /**@brief Initialize an ANT channel configuration structure for the Bicycle Power profile (Display). * * @param[in] NAME Name of related instance. * @param[in] CHANNEL_NUMBER Number of the channel assigned to the profile instance. * @param[in] TRANSMISSION_TYPE Type of transmission assigned to the profile instance. * @param[in] DEVICE_NUMBER Number of the device assigned to the profile instance. * @param[in] NETWORK_NUMBER Number of the network assigned to the profile instance. */ #define BPWR_DISP_CHANNEL_CONFIG_DEF(NAME, \ CHANNEL_NUMBER, \ TRANSMISSION_TYPE, \ DEVICE_NUMBER, \ NETWORK_NUMBER) \ static const ant_channel_config_t CONCAT_2(NAME, _channel_bpwr_disp_config) = \ { \ .channel_number = (CHANNEL_NUMBER), \ .channel_type = BPWR_DISP_CHANNEL_TYPE, \ .ext_assign = BPWR_EXT_ASSIGN, \ .rf_freq = BPWR_ANTPLUS_RF_FREQ, \ .transmission_type = (TRANSMISSION_TYPE), \ .device_type = BPWR_DEVICE_TYPE, \ .device_number = (DEVICE_NUMBER), \ .channel_period = BPWR_MSG_PERIOD, \ .network_number = (NETWORK_NUMBER), \ } #define BPWR_DISP_CHANNEL_CONFIG(NAME) &CONCAT_2(NAME, _channel_bpwr_disp_config) /**@brief Initialize an ANT channel configuration structure for the Bicycle Power profile (Sensor). * * @param[in] NAME Name of related instance. * @param[in] CHANNEL_NUMBER Number of the channel assigned to the profile instance. * @param[in] TRANSMISSION_TYPE Type of transmission assigned to the profile instance. * @param[in] DEVICE_NUMBER Number of the device assigned to the profile instance. * @param[in] NETWORK_NUMBER Number of the network assigned to the profile instance. */ #define BPWR_SENS_CHANNEL_CONFIG_DEF(NAME, \ CHANNEL_NUMBER, \ TRANSMISSION_TYPE, \ DEVICE_NUMBER, \ NETWORK_NUMBER) \ static const ant_channel_config_t CONCAT_2(NAME, _channel_bpwr_sens_config) = \ { \ .channel_number = (CHANNEL_NUMBER), \ .channel_type = BPWR_SENS_CHANNEL_TYPE, \ .ext_assign = BPWR_EXT_ASSIGN, \ .rf_freq = BPWR_ANTPLUS_RF_FREQ, \ .transmission_type = (TRANSMISSION_TYPE), \ .device_type = BPWR_DEVICE_TYPE, \ .device_number = (DEVICE_NUMBER), \ .channel_period = BPWR_MSG_PERIOD, \ .network_number = (NETWORK_NUMBER), \ } #define BPWR_SENS_CHANNEL_CONFIG(NAME) &CONCAT_2(NAME, _channel_bpwr_sens_config) /**@brief Initialize an ANT profile configuration structure for the BPWR profile (Display). * * @param[in] NAME Name of related instance. * @param[in] EVT_HANDLER Event handler to be called for handling events in the BPWR profile. */ #define BPWR_DISP_PROFILE_CONFIG_DEF(NAME, \ EVT_HANDLER) \ static ant_bpwr_disp_cb_t CONCAT_2(NAME, _bpwr_disp_cb); \ static const ant_bpwr_disp_config_t CONCAT_2(NAME, _profile_bpwr_disp_config) = \ { \ .p_cb = &CONCAT_2(NAME, _bpwr_disp_cb), \ .evt_handler = (EVT_HANDLER), \ } #define BPWR_DISP_PROFILE_CONFIG(NAME) &CONCAT_2(NAME, _profile_bpwr_disp_config) /**@brief Initialize an ANT profile configuration structure for the BPWR profile (Sensor). * * @param[in] NAME Name of related instance. * @param[in] TORQUE_USED Determines whether the torque page is included. * @param[in] CALIB_HANDLER Event handler to be called for handling calibration requests. * @param[in] EVT_HANDLER Event handler to be called for handling events in the BPWR profile. */ #define BPWR_SENS_PROFILE_CONFIG_DEF(NAME, \ TORQUE_USED, \ CALIB_HANDLER, \ EVT_HANDLER) \ static ant_bpwr_sens_cb_t CONCAT_2(NAME, _bpwr_sens_cb); \ static const ant_bpwr_sens_config_t CONCAT_2(NAME, _profile_bpwr_sens_config) = \ { \ .torque_use = (TORQUE_USED), \ .calib_handler = (CALIB_HANDLER), \ .p_cb = &CONCAT_2(NAME, _bpwr_sens_cb), \ .evt_handler = (EVT_HANDLER), \ } #define BPWR_SENS_PROFILE_CONFIG(NAME) &NAME##_profile_bpwr_sens_config /**@brief Configuration values for the Bicycle Power torque page. */ typedef enum { TORQUE_NONE = 0, TORQUE_WHEEL = 1, TORQUE_CRANK = 2, } ant_bpwr_torque_t; /**@brief Bicycle Power page number type. */ typedef enum { ANT_BPWR_PAGE_1 = 1, ///< Calibration data page. ANT_BPWR_PAGE_16 = 16, ///< Standard power-only main data page. ANT_BPWR_PAGE_17 = 17, ///< Standard wheel torque main data page. ANT_BPWR_PAGE_18 = 18, ///< Standard crank torque main data page. ANT_BPWR_PAGE_80 = ANT_COMMON_PAGE_80, ANT_BPWR_PAGE_81 = ANT_COMMON_PAGE_81 } ant_bpwr_page_t; /**@brief BPWR profile event type. */ typedef enum { ANT_BPWR_PAGE_1_UPDATED = ANT_BPWR_PAGE_1, ///< Data page 1 and speed have been updated (Display) or sent (Sensor). ANT_BPWR_PAGE_16_UPDATED = ANT_BPWR_PAGE_16, ///< Data page 16 and speed have been updated (Display) or sent (Sensor). ANT_BPWR_PAGE_17_UPDATED = ANT_BPWR_PAGE_17, ///< Data page 17 and speed have been updated (Display) or sent (Sensor). ANT_BPWR_PAGE_18_UPDATED = ANT_BPWR_PAGE_18, ///< Data page 18 has been updated (Display) or sent (Sensor). ANT_BPWR_PAGE_80_UPDATED = ANT_BPWR_PAGE_80, ///< Data page 80 has been updated (Display) or sent (Sensor). ANT_BPWR_PAGE_81_UPDATED = ANT_BPWR_PAGE_81, ///< Data page 81 has been updated (Display) or sent (Sensor). ANT_BPWR_CALIB_TIMEOUT, ///< Request of calibration time-out occurred (Display). ANT_BPWR_CALIB_REQUEST_TX_FAILED, ///< Calibration request did not reach the destination (Display). } ant_bpwr_evt_t; // Forward declaration of the ant_bpwr_profile_t type. typedef struct ant_bpwr_profile_s ant_bpwr_profile_t; /**@brief BPWR event handler type. */ typedef void (* ant_bpwr_evt_handler_t) (ant_bpwr_profile_t *, ant_bpwr_evt_t); /**@brief BPWR Sensor calibration request handler type. */ typedef void (* ant_bpwr_calib_handler_t) (ant_bpwr_profile_t *, ant_bpwr_page1_data_t *); #include "ant_bpwr_local.h" #ifdef __cplusplus extern "C" { #endif /**@brief Bicycle Power Sensor configuration structure. */ typedef struct { ant_bpwr_torque_t torque_use; ///< Determines whether the torque page is included. ant_bpwr_sens_cb_t * p_cb; ///< Pointer to the data buffer for internal use. ant_bpwr_evt_handler_t evt_handler; ///< Event handler to be called for handling events in the BPWR profile. ant_bpwr_calib_handler_t calib_handler; ///< Event handler to be called for handling calibration requests. } ant_bpwr_sens_config_t; /**@brief Bicycle Power Display configuration structure. */ typedef struct { ant_bpwr_disp_cb_t * p_cb; ///< Pointer to the data buffer for internal use. ant_bpwr_evt_handler_t evt_handler; ///< Event handler to be called for handling events in the BPWR profile. } ant_bpwr_disp_config_t; /**@brief Bicycle Power profile structure. */ struct ant_bpwr_profile_s { uint8_t channel_number; ///< Channel number assigned to the profile. union { ant_bpwr_disp_cb_t * p_disp_cb; ant_bpwr_sens_cb_t * p_sens_cb; } _cb; ///< Pointer to internal control block. ant_bpwr_evt_handler_t evt_handler; ///< Event handler to be called for handling events in the BPWR profile. ant_bpwr_page1_data_t page_1; ///< Page 1. ant_bpwr_page16_data_t page_16; ///< Page 16. ant_bpwr_page17_data_t page_17; ///< Page 17. ant_bpwr_page18_data_t page_18; ///< Page 18. ant_common_page80_data_t page_80; ///< Page 80. ant_common_page81_data_t page_81; ///< Page 81. ant_bpwr_common_data_t common; ///< BPWR common data. }; /** @name Defines for accessing ant_bpwr_profile_t member variables @{ */ #define BPWR_PROFILE_calibration_id page_1.calibration_id #define BPWR_PROFILE_auto_zero_status page_1.auto_zero_status #define BPWR_PROFILE_general_calib_data page_1.data.general_calib #define BPWR_PROFILE_custom_calib_data page_1.data.custom_calib #define BPWR_PROFILE_instantaneous_cadence common.instantaneous_cadence #define BPWR_PROFILE_pedal_power page_16.pedal_power.items #define BPWR_PROFILE_power_update_event_count page_16.update_event_count #define BPWR_PROFILE_accumulated_power page_16.accumulated_power #define BPWR_PROFILE_instantaneous_power page_16.instantaneous_power #define BPWR_PROFILE_wheel_update_event_count page_17.update_event_count #define BPWR_PROFILE_wheel_tick page_17.tick #define BPWR_PROFILE_wheel_period page_17.period #define BPWR_PROFILE_wheel_accumulated_torque page_17.accumulated_torque #define BPWR_PROFILE_crank_update_event_count page_18.update_event_count #define BPWR_PROFILE_crank_tick page_18.tick #define BPWR_PROFILE_crank_period page_18.period #define BPWR_PROFILE_crank_accumulated_torque page_18.accumulated_torque #define BPWR_PROFILE_manuf_id page_80.manuf_id #define BPWR_PROFILE_hw_revision page_80.hw_revision #define BPWR_PROFILE_manufacturer_id page_80.manufacturer_id #define BPWR_PROFILE_model_number page_80.model_number #define BPWR_PROFILE_sw_revision_minor page_81.sw_revision_minor #define BPWR_PROFILE_sw_revision_major page_81.sw_revision_major #define BPWR_PROFILE_serial_number page_81.serial_number /** @} */ /**@brief Function for initializing the ANT Bicycle Power Display profile instance. * * @param[in] p_profile Pointer to the profile instance. * @param[in] p_channel_config Pointer to the ANT channel configuration structure. * @param[in] p_disp_config Pointer to the Bicycle Power Display configuration structure. * * @retval NRF_SUCCESS If initialization was successful. Otherwise, an error code is returned. */ ret_code_t ant_bpwr_disp_init(ant_bpwr_profile_t * p_profile, ant_channel_config_t const * p_channel_config, ant_bpwr_disp_config_t const * p_disp_config); /**@brief Function for initializing the ANT Bicycle Power Sensor profile instance. * * @param[in] p_profile Pointer to the profile instance. * @param[in] p_channel_config Pointer to the ANT channel configuration structure. * @param[in] p_sens_config Pointer to the Bicycle Power Sensor configuration structure. * * @retval NRF_SUCCESS If initialization was successful. Otherwise, an error code is returned. */ ret_code_t ant_bpwr_sens_init(ant_bpwr_profile_t * p_profile, ant_channel_config_t const * p_channel_config, ant_bpwr_sens_config_t const * p_sens_config); /**@brief Function for opening the profile instance channel for ANT BPWR Display. * * Before calling this function, pages should be configured. * * @param[in] p_profile Pointer to the profile instance. * * @retval NRF_SUCCESS If the channel was successfully opened. Otherwise, an error code is returned. */ ret_code_t ant_bpwr_disp_open(ant_bpwr_profile_t * p_profile); /**@brief Function for opening the profile instance channel for ANT BPWR Sensor. * * Before calling this function, pages should be configured. * * @param[in] p_profile Pointer to the profile instance. * * @retval NRF_SUCCESS If the channel was successfully opened. Otherwise, an error code is returned. */ ret_code_t ant_bpwr_sens_open(ant_bpwr_profile_t * p_profile); /** @name Functions: Sensor calibration API * @{ */ /** @brief Function for initializing the response for a calibration request. * * This function should be used to signal the status of the calibration procedure to the ANT profile layer . * * @param[in] p_profile Pointer to the profile instance. */ void ant_bpwr_calib_response(ant_bpwr_profile_t * p_profile); /** @} */ /**@brief Function for handling the Sensor ANT events. * * @details This function handles all events from the ANT stack that are of interest to the Bicycle Power Display profile. * * @param[in] p_ant_evt Event received from the ANT stack. * @param[in] p_context Pointer to the profile instance. */ void ant_bpwr_sens_evt_handler(ant_evt_t * p_ant_evt, void * p_context); /**@brief Function for handling the Display ANT events. * * @details This function handles all events from the ANT stack that are of interest to the Bicycle Power Display profile. * * @param[in] p_ant_evt Event received from the ANT stack. * @param[in] p_context Pointer to the profile instance. */ void ant_bpwr_disp_evt_handler(ant_evt_t * p_ant_evt, void * p_context); /** @name Functions: Display calibration API * @{ */ /**@brief Function for initializing the calibration request process from the Bicycle Power Display side. * * @details This function requests a transfer to the Sensor and starts watching for the calibration response. * If a calibration response has already been requested, the function ignores the new request and returns NRF_SUCCESS. * * @param [in] p_profile Pointer to the profile instance. * @param [in] p_page_1 Pointer to the prepared page 1. * * @return Values returned by the @ref sd_ant_acknowledge_message_tx SVC callback. */ uint32_t ant_bpwr_calib_request(ant_bpwr_profile_t * p_profile, ant_bpwr_page1_data_t * p_page_1); /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif // ANT_BICYCLE_POWER_H__