/** * Copyright (c) 2012 - 2018, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ #ifndef PCA10001_H #define PCA10001_H #ifdef __cplusplus extern "C" { #endif #include "nrf_gpio.h" #define LED_START 18 #define LED_0 18 #define LED_1 19 #define LED_STOP 19 #define LEDS_ACTIVE_STATE 1 #define BSP_LED_0 LED_0 #define BSP_LED_1 LED_1 #define LEDS_INV_MASK 0x00000000 #define BUTTON_START 16 #define BUTTON_0 16 #define BUTTON_1 17 #define BUTTON_STOP 17 #define BUTTON_PULL NRF_GPIO_PIN_PULLUP #define BUTTONS_ACTIVE_STATE 0 #define BSP_BUTTON_0 BUTTON_0 #define BSP_BUTTON_1 BUTTON_1 #define BUTTONS_NUMBER 2 #define LEDS_NUMBER 2 #define BUTTONS_LIST { BUTTON_0, BUTTON_1 } #define LEDS_LIST { LED_0, LED_1 } #define RX_PIN_NUMBER 11 #define TX_PIN_NUMBER 9 #define CTS_PIN_NUMBER 10 #define RTS_PIN_NUMBER 8 #define HWFC true #define SPIS_MISO_PIN 20 // SPI MISO signal. #define SPIS_CSN_PIN 21 // SPI CSN signal. #define SPIS_MOSI_PIN 22 // SPI MOSI signal. #define SPIS_SCK_PIN 23 // SPI SCK signal. #define SPIM0_SCK_PIN 23u /**< SPI clock GPIO pin number. */ #define SPIM0_MOSI_PIN 20u /**< SPI Master Out Slave In GPIO pin number. */ #define SPIM0_MISO_PIN 22u /**< SPI Master In Slave Out GPIO pin number. */ #define SPIM0_SS_PIN 21u /**< SPI Slave Select GPIO pin number. */ #define SPIM1_SCK_PIN 29u /**< SPI clock GPIO pin number. */ #define SPIM1_MOSI_PIN 24u /**< SPI Master Out Slave In GPIO pin number. */ #define SPIM1_MISO_PIN 28u /**< SPI Master In Slave Out GPIO pin number. */ #define SPIM1_SS_PIN 25u /**< SPI Slave Select GPIO pin number. */ // serialization APPLICATION board // UART // this configuration works with the SPI wires setup #define SER_APP_RX_PIN 20 // UART RX pin number. #define SER_APP_TX_PIN 22 // UART TX pin number. #define SER_APP_CTS_PIN 23 // UART Clear To Send pin number. #define SER_APP_RTS_PIN 21 // UART Request To Send pin number. // SPI #if 0 #define SER_APP_SPIM0_SCK_PIN 20 // SPI clock GPIO pin number. #define SER_APP_SPIM0_MOSI_PIN 17 // SPI Master Out Slave In GPIO pin number #define SER_APP_SPIM0_MISO_PIN 16 // SPI Master In Slave Out GPIO pin number #define SER_APP_SPIM0_SS_PIN 21 // SPI Slave Select GPIO pin number #define SER_APP_SPIM0_RDY_PIN 19 // SPI READY GPIO pin number #define SER_APP_SPIM0_REQ_PIN 18 // SPI REQUEST GPIO pin number #else #define SER_APP_SPIM0_SCK_PIN 23 // SPI clock GPIO pin number. #define SER_APP_SPIM0_MOSI_PIN 20 // SPI Master Out Slave In GPIO pin number #define SER_APP_SPIM0_MISO_PIN 22 // SPI Master In Slave Out GPIO pin number #define SER_APP_SPIM0_SS_PIN 21 // SPI Slave Select GPIO pin number #define SER_APP_SPIM0_RDY_PIN 25 // SPI READY GPIO pin number #define SER_APP_SPIM0_REQ_PIN 24 // SPI REQUEST GPIO pin number #endif // serialization CONNECTIVITY board // UART #if 0 #define SER_CON_RX_PIN 22 // UART RX pin number. #define SER_CON_TX_PIN 20 // UART TX pin number. #define SER_CON_CTS_PIN 21 // UART Clear To Send pin number. Not used if HWFC is set to false. #define SER_CON_RTS_PIN 23 // UART Request To Send pin number. Not used if HWFC is set to false. #else // this configuration works with the SPI wires setup #define SER_CON_RX_PIN 20 // UART RX pin number. #define SER_CON_TX_PIN 22 // UART TX pin number. #define SER_CON_CTS_PIN 21 // UART Clear To Send pin number. Not used if HWFC is set to false. #define SER_CON_RTS_PIN 23 // UART Request To Send pin number. Not used if HWFC is set to false. #endif //SPI #if 0 #define SER_CON_SPIS_SCK_PIN 20 // SPI SCK signal. #define SER_CON_SPIS_MISO_PIN 16 // SPI MISO signal. #define SER_CON_SPIS_MOSI_PIN 17 // SPI MOSI signal. #define SER_CON_SPIS_CSN_PIN 21 // SPI CSN signal. #define SER_CON_SPIS_RDY_PIN 19 // SPI READY GPIO pin number. #define SER_CON_SPIS_REQ_PIN 18 // SPI REQUEST GPIO pin number. #else #define SER_CON_SPIS_SCK_PIN 23 // SPI SCK signal. #define SER_CON_SPIS_MOSI_PIN 22 // SPI MOSI signal. #define SER_CON_SPIS_MISO_PIN 20 // SPI MISO signal. #define SER_CON_SPIS_CSN_PIN 21 // SPI CSN signal. #define SER_CON_SPIS_RDY_PIN 25 // SPI READY GPIO pin number. #define SER_CON_SPIS_REQ_PIN 24 // SPI REQUEST GPIO pin number. #endif #define SER_CONN_ASSERT_LED_PIN LED_0 #ifdef __cplusplus } #endif #endif