/** * Copyright (c) 2014 - 2018, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /** @file ipv6_api.h * * @defgroup iot_ipv6 IPv6 Core Application Interface for Nordic's IPv6 stack * @ingroup iot_sdk_stack * @{ * @brief Nordic's IPv6 stack. Currently, only a Host role is supported. * * @details Nordic's IPv6 stack provides minimal implementations of ICMP, UDP for a Host, and * IPv6 Neighbor Discovery for Host. * Router, neighbor, and prefix cache are not maintained across BLE link disconnections or * power cycles. */ #ifndef IPV6_API_H_ #define IPV6_API_H_ #include #include "sdk_config.h" #include "iot_common.h" #include "iot_pbuffer.h" #ifdef __cplusplus extern "C" { #endif /**@brief Asynchronous event identifiers type. */ typedef enum { IPV6_EVT_INTERFACE_ADD, /**< Notification of a new IPv6 interface added. */ IPV6_EVT_INTERFACE_DELETE, /**< Notification of IPv6 interface deleted. */ IPV6_EVT_INTERFACE_RX_DATA /**< Notification of IPv6 data, depending on configuration. For example, IPV6_ENABLE_USNUPORTED_PROTOCOLS_TO_APPLICATION. */ } ipv6_event_id_t; /**@brief IPv6 address configuration. */ typedef struct { ipv6_addr_t addr; ipv6_addr_state_t state; } ipv6_addr_conf_t; /**@brief Event parameters associated with the IPV6_EVT_INTERFACE_RX_DATA event. */ typedef struct { ipv6_header_t * p_ip_header; /**< IPv6 header of the packet. */ iot_pbuffer_t * p_rx_packet; /**< Packet buffer contains received data. */ } ipv6_data_rx_t; /**@brief Asynchronous event parameter type. */ typedef union { ipv6_data_rx_t rx_event_param; /**< Parameters notified with the received IPv6 packet. */ } ipv6_event_param_t; /**@brief Asynchronous event type. */ typedef struct { ipv6_event_id_t event_id; /**< Event identifier. */ ipv6_event_param_t event_param; /**< Event parameters. */ } ipv6_event_t; /**@brief Asynchronous event notification callback type. */ typedef void (* ipv6_evt_handler_t)(iot_interface_t * p_interface, ipv6_event_t * p_event); /**@brief Initialization parameters type. */ typedef struct { eui64_t * p_eui64; /**< Global identifiers EUI-64 address of device. */ ipv6_evt_handler_t event_handler; /**< Asynchronous event notification callback registered to receive IPv6 events. */ } ipv6_init_t; /**@brief Initializes the IPv6 stack module. * * @param[in] p_init Initialization parameters. * * @retval NRF_SUCCESS If initialization was successful. Otherwise, an error code is returned. */ uint32_t ipv6_init(const ipv6_init_t * p_init); /**@brief Sets address to specific interface. * * @details API used to add or update an IPv6 address on an interface. The address can have three specific * states that determine transmitting capabilities. * * @param[in] p_interface The interface on which the address must be assigned. * @param[in] p_addr IPv6 address and state to be assigned/updated. * * @retval NRF_SUCCESS If the operation was successful. * @retval NRF_ERROR_NO_MEM If no memory was available. */ uint32_t ipv6_address_set(const iot_interface_t * p_interface, const ipv6_addr_conf_t * p_addr); /**@brief Removes address from specific interface. * * @details API used to remove an IPv6 address from an interface. * * @param[in] p_interface The interface from which the address must be removed. * @param[in] p_addr IPv6 address to remove. * * @retval NRF_SUCCESS If the operation was successful. * @retval NRF_ERROR_NOT_FOUND If no address was found. */ uint32_t ipv6_address_remove(const iot_interface_t * p_interface, const ipv6_addr_t * p_addr); /**@brief Checks if given unicast address has been registered. * * @param[in] p_interface The interface on which IPv6 address wil be checked. * @param[in] p_addr IPv6 address to be checked. * * @retval NRF_SUCCESS If the operation was successful. * @retval NRF_ERROR_NOT_FOUND If no address was found. */ uint32_t ipv6_address_check(const iot_interface_t * p_interface, const ipv6_addr_t * p_addr); /**@brief Finds the best matched address and interface. * * @details API used to find the most suitable interface and address to a given destination address. * * To look only for the interface, set p_addr_r to NULL. * * To find the best matched address, IPV6_ADDR_STATE_PREFERRED state of address is required. * * @param[out] pp_interface Interface to be found. * @param[out] p_addr_r Best matching address if procedure succeeded and this value was not NULL. * @param[inout] p_addr_f IPv6 address for which best matching interface and/or address are requested. * * @retval NRF_SUCCESS If the operation was successful. * @retval NRF_ERROR_NOT_FOUND If no interface was found. * @retval NRF_ERROR_NOT_SUPPORTED If the operation was not supported. */ uint32_t ipv6_address_find_best_match(iot_interface_t ** pp_interface, ipv6_addr_t * p_addr_r, const ipv6_addr_t * p_addr_f); /**@brief Sends IPv6 packet. * * @details API used to send an IPv6 packet. Which interface that packet must be sent to is determined * by analyzing the destination address. * * @param[in] p_interface The interface to which the packet is to be sent. * @param[in] p_packet IPv6 packet to send. The packet should be allocated using * @ref iot_pbuffer_allocate, to give stack control and to release * the memory buffer. * * @retval NRF_SUCCESS If the send request was successful. * @retval NRF_ERROR_NOT_FOUND If there was a failure while looking for the interface. * @retval NRF_ERROR_INVALID_PARAM If there was an error in processing the IPv6 packet. * @retval NRF_ERROR_NO_MEM If no memory was available in the transport * interface. */ uint32_t ipv6_send(const iot_interface_t * p_interface, iot_pbuffer_t * p_packet); #ifdef __cplusplus } #endif #endif //IPV6_API_H_ /** @} */