/** * Copyright (c) 2015 - 2018, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /** @file * * @defgroup app_pwm Pulse-width modulation (PWM) * @{ * @ingroup app_common * * @brief Module for generating a pulse-width modulated output signal. * * @details This module provides a PWM implementation using timers, GPIOTE, and PPI. * * Resource usage: * - 2 PPI channels per instance + 2 PPI channels per PWM channel. * - 1 PPI group per instance. * - 1 GPIOTE channel per PWM channel. * * For example, a PWM instance with two channels will consume 2 + 4 PPI channels, 1 PPI group, and 2 GPIOTE channels. * * The maximum number of PWM channels per instance is 2. */ #ifndef APP_PWM_H__ #define APP_PWM_H__ #include #include "sdk_errors.h" #include "nrf_drv_timer.h" #include "nrf_drv_ppi.h" #include "nrf_peripherals.h" #ifdef __cplusplus extern "C" { #endif #if defined(GPIOTE_FEATURE_SET_PRESENT) && defined(GPIOTE_FEATURE_CLR_PRESENT) #define GPIOTE_SET_CLEAR_TASKS #endif #define APP_PWM_NOPIN 0xFFFFFFFF /** @brief Number of channels for one timer instance (fixed to 2 due to timer properties).*/ #define APP_PWM_CHANNELS_PER_INSTANCE 2 /**@brief Macro for creating a PWM instance. */ #define APP_PWM_INSTANCE(name, num) \ const nrf_drv_timer_t m_pwm_##name##_timer = NRF_DRV_TIMER_INSTANCE(num); \ app_pwm_cb_t m_pwm_##name##_cb; \ /*lint -e{545}*/ \ const app_pwm_t name = { \ .p_cb = &m_pwm_##name##_cb, \ .p_timer = &m_pwm_##name##_timer, \ } /**@brief PWM instance default configuration (1 channel). */ #define APP_PWM_DEFAULT_CONFIG_1CH(period_in_us, pin) \ { \ .pins = {pin, APP_PWM_NOPIN}, \ .pin_polarity = {APP_PWM_POLARITY_ACTIVE_LOW, APP_PWM_POLARITY_ACTIVE_LOW}, \ .num_of_channels = 1, \ .period_us = period_in_us \ } /**@brief PWM instance default configuration (2 channels). */ #define APP_PWM_DEFAULT_CONFIG_2CH(period_in_us, pin0, pin1) \ { \ .pins = {pin0, pin1}, \ .pin_polarity = {APP_PWM_POLARITY_ACTIVE_LOW, APP_PWM_POLARITY_ACTIVE_LOW}, \ .num_of_channels = 2, \ .period_us = period_in_us \ } typedef uint16_t app_pwm_duty_t; /** * @brief PWM callback that is executed when a PWM duty change has been completed. * * @param[in] pwm_id PWM instance ID. */ typedef void (* app_pwm_callback_t)(uint32_t); /** * @brief Channel polarity. */ typedef enum { APP_PWM_POLARITY_ACTIVE_LOW = 0, APP_PWM_POLARITY_ACTIVE_HIGH = 1 } app_pwm_polarity_t; /**@brief PWM configuration structure used for initialization. */ typedef struct { uint32_t pins[APP_PWM_CHANNELS_PER_INSTANCE]; //!< Pins configured as PWM output. app_pwm_polarity_t pin_polarity[APP_PWM_CHANNELS_PER_INSTANCE]; //!< Polarity of active state on pin. uint32_t num_of_channels; //!< Number of channels that can be used. uint32_t period_us; //!< PWM signal output period to configure (in microseconds). } app_pwm_config_t; /** * @cond (NODOX) * @defgroup app_pwm_internal Auxiliary internal types declarations * @{ * @internal * * @brief Module for internal usage inside the library only * * There are some definitions that must be included in the header file because * of the way the library is set up. In this way, the are accessible to the user. * However, any functions and variables defined here may change at any time * without a warning, so you should not access them directly. */ /** * @brief PWM channel instance * * This structure holds all data needed by a single PWM channel. */ typedef struct { uint32_t gpio_pin; //!< Pin that is used by this PWM channel. uint32_t pulsewidth; //!< The copy of duty currently set (in ticks). nrf_ppi_channel_t ppi_channels[2]; //!< PPI channels used by the PWM channel to clear and set the output. app_pwm_polarity_t polarity; //!< The active state of the pin. uint8_t initialized; //!< The internal information if the selected channel was initialized. } app_pwm_channel_cb_t; /** * @brief Variable part of PWM instance * * This structure holds instance data that may change. */ typedef struct { app_pwm_channel_cb_t channels_cb[APP_PWM_CHANNELS_PER_INSTANCE]; //!< Channels data uint32_t period; //!< Selected period in ticks app_pwm_callback_t p_ready_callback; //!< Callback function called on PWM readiness #ifdef GPIOTE_SET_CLEAR_TASKS nrf_ppi_channel_t ppi_channel; //!< PPI channel used temporary while changing duty #else nrf_ppi_channel_t ppi_channels[2]; //!< PPI channels used temporary while changing duty nrf_ppi_channel_group_t ppi_group; //!< PPI group used to synchronize changes on channels #endif nrfx_drv_state_t state; //!< Current driver status } app_pwm_cb_t; /** @} * @endcond */ /**@brief PWM instance structure. */ typedef struct { app_pwm_cb_t *p_cb; //!< Pointer to control block internals. nrf_drv_timer_t const * const p_timer; //!< Timer used by this PWM instance. } app_pwm_t; /** * @brief Function for checking if the PWM instance is busy updating the duty cycle. * * @param[in] p_instance PWM instance. * * @retval True If the PWM instance is ready for duty cycle changes. * @retval False If a change operation is in progress. */ bool app_pwm_busy_check(app_pwm_t const * const p_instance); /** * @brief Function for initializing a PWM instance. * * @param[in] p_instance PWM instance. * @param[in] p_config Initial configuration. * @param[in] p_ready_callback Pointer to ready callback function (or NULL to disable). * * @retval NRF_SUCCESS If initialization was successful. * @retval NRF_ERROR_NO_MEM If there were not enough free resources. * @retval NRF_ERROR_INVALID_PARAM If an invalid configuration structure was passed. * @retval NRF_ERROR_INVALID_STATE If the timer/PWM is already in use or if initialization failed. */ ret_code_t app_pwm_init(app_pwm_t const * const p_instance, app_pwm_config_t const * const p_config, app_pwm_callback_t p_ready_callback); /** * @brief Function for uninitializing a PWM instance and releasing the allocated resources. * * @param[in] p_instance PWM instance. * * @retval NRF_SUCCESS If uninitialization was successful. * @retval NRF_ERROR_INVALID_STATE If the given instance was not initialized. */ ret_code_t app_pwm_uninit(app_pwm_t const * const p_instance); /** * @brief Function for enabling a PWM instance after initialization. * * @param[in] p_instance PWM instance. */ void app_pwm_enable(app_pwm_t const * const p_instance); /** * @brief Function for disabling a PWM instance after initialization. * * @param[in] p_instance PWM instance. */ void app_pwm_disable(app_pwm_t const * const p_instance); /** * @brief Function for setting the PWM channel duty cycle in percents. * * A duty cycle change requires one full PWM clock period to finish. * If another change is attempted for any channel of given instance before * the current change is complete, the new attempt will result in the error * NRF_ERROR_BUSY. * * @param[in] p_instance PWM instance. * @param[in] channel Channel number. * @param[in] duty Duty cycle (0 - 100). * * @retval NRF_SUCCESS If the operation was successful. * @retval NRF_ERROR_BUSY If the PWM is not ready yet. * @retval NRF_ERROR_INVALID_STATE If the given instance was not initialized. * */ ret_code_t app_pwm_channel_duty_set(app_pwm_t const * const p_instance, uint8_t channel, app_pwm_duty_t duty); /** * @brief Function for retrieving the PWM channel duty cycle in percents. * * @param[in] p_instance PWM instance. * @param[in] channel Channel number. * * @return Duty cycle value. */ app_pwm_duty_t app_pwm_channel_duty_get(app_pwm_t const * const p_instance, uint8_t channel); /** * @name Functions accessing values in ticks * * Auxiliary functions that allow to get values in actual timer ticks. * @{ */ /** * @brief Function for setting PWM channel duty cycle in clock ticks. * * @note Duty cycle changes require one full PWM clock period to finish. * Until that, the next change attempt (for any channel of given instance) * will result in an NRF_ERROR_BUSY error. * * @param[in] p_instance PWM instance. * @param[in] channel Channel number. * @param[in] ticks Number of PWM clock ticks. * * @retval NRF_SUCCESS If the operation was successful. * @retval NRF_ERROR_BUSY If PWM is not ready yet. * @retval NRF_ERROR_INVALID_STATE If the given instance was not initialized. */ ret_code_t app_pwm_channel_duty_ticks_set(app_pwm_t const * const p_instance, uint8_t channel, uint16_t ticks); /** * @brief Function for retrieving the PWM channel duty cycle in ticks. * * This function retrieves the real, currently set duty cycle in ticks. * For one full PWM cycle the value might be different than the value set by the last * @ref app_pwm_channel_duty_ticks_set function call. * * @param[in] p_instance PWM instance. * @param[in] channel Channel number. * * @return Number of ticks set for selected channel. * */ uint16_t app_pwm_channel_duty_ticks_get(app_pwm_t const * const p_instance, uint8_t channel); /** * @brief Function for returning the number of ticks in a whole cycle. * * @param[in] p_instance PWM instance. * * @return Number of ticks that corresponds to 100% of the duty cycle. */ uint16_t app_pwm_cycle_ticks_get(app_pwm_t const * const p_instance); /** @} */ #ifdef __cplusplus } #endif #endif /** @} */