/** * Copyright (c) 2015 - 2018, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ #ifndef NRFX_I2S_H__ #define NRFX_I2S_H__ #include #include #ifdef __cplusplus extern "C" { #endif /** * @defgroup nrfx_i2s I2S driver * @{ * @ingroup nrf_i2s * @brief Inter-IC Sound (I2S) peripheral driver. */ /** * @brief This value can be provided instead of a pin number for the signals * SDOUT, SDIN, and MCK to specify that a given signal is not used * and therefore does not need to be connected to a pin. */ #define NRFX_I2S_PIN_NOT_USED 0xFF /** @brief I2S driver configuration structure. */ typedef struct { uint8_t sck_pin; ///< SCK pin number. uint8_t lrck_pin; ///< LRCK pin number. uint8_t mck_pin; ///< MCK pin number. /**< Optional. Use @ref NRFX_I2S_PIN_NOT_USED * if this signal is not needed. */ uint8_t sdout_pin; ///< SDOUT pin number. /**< Optional. Use @ref NRFX_I2S_PIN_NOT_USED * if this signal is not needed. */ uint8_t sdin_pin; ///< SDIN pin number. /**< Optional. Use @ref NRFX_I2S_PIN_NOT_USED * if this signal is not needed. */ uint8_t irq_priority; ///< Interrupt priority. nrf_i2s_mode_t mode; ///< Mode of operation. nrf_i2s_format_t format; ///< Frame format. nrf_i2s_align_t alignment; ///< Alignment of sample within a frame. nrf_i2s_swidth_t sample_width; ///< Sample width. nrf_i2s_channels_t channels; ///< Enabled channels. nrf_i2s_mck_t mck_setup; ///< Master clock setup. nrf_i2s_ratio_t ratio; ///< MCK/LRCK ratio. } nrfx_i2s_config_t; /** @brief I2S driver buffers structure. */ typedef struct { uint32_t * p_rx_buffer; uint32_t const * p_tx_buffer; } nrfx_i2s_buffers_t; /** * @brief I2S driver default configuration. */ #define NRFX_I2S_DEFAULT_CONFIG \ { \ .sck_pin = NRFX_I2S_CONFIG_SCK_PIN, \ .lrck_pin = NRFX_I2S_CONFIG_LRCK_PIN, \ .mck_pin = NRFX_I2S_CONFIG_MCK_PIN, \ .sdout_pin = NRFX_I2S_CONFIG_SDOUT_PIN, \ .sdin_pin = NRFX_I2S_CONFIG_SDIN_PIN, \ .irq_priority = NRFX_I2S_CONFIG_IRQ_PRIORITY, \ .mode = (nrf_i2s_mode_t)NRFX_I2S_CONFIG_MASTER, \ .format = (nrf_i2s_format_t)NRFX_I2S_CONFIG_FORMAT, \ .alignment = (nrf_i2s_align_t)NRFX_I2S_CONFIG_ALIGN, \ .sample_width = (nrf_i2s_swidth_t)NRFX_I2S_CONFIG_SWIDTH, \ .channels = (nrf_i2s_channels_t)NRFX_I2S_CONFIG_CHANNELS, \ .mck_setup = (nrf_i2s_mck_t)NRFX_I2S_CONFIG_MCK_SETUP, \ .ratio = (nrf_i2s_ratio_t)NRFX_I2S_CONFIG_RATIO, \ } #define NRFX_I2S_STATUS_NEXT_BUFFERS_NEEDED (1UL << 0) /**< The application should provide buffers that are to be used in the next * part of the transfer. A call to @ref nrfx_i2s_next_buffers_set should * be done before the currently used buffers are completely processed * (i.e. the time remaining for supplying the next buffers depends on * the used size of the buffers). */ /** * @brief I2S driver data handler type. * * A data handling function of this type must be specified during initialization * of the driver. The driver will call this function when it finishes using * buffers passed to it by the application, and when it needs to be provided * with buffers for the next part of the transfer. * * @note The @c p_released pointer passed to this function is temporary and * will be invalid after the function returns, hence it cannot be stored * and used later. If needed, the pointed content (i.e. buffers pointers) * should be copied instead. * * @param[in] p_released Pointer to a structure with pointers to buffers * passed previously to the driver that will no longer * be access by it (they can be now safely released or * used for another purpose, in particular for a next * part of the transfer). * This pointer will be NULL if the application did not * supply the buffers for the next part of the transfer * (via a call to @ref nrfx_i2s_next_buffers_set) since * the previous time the data handler signaled such need. * This means that data corruption occurred (the previous * buffers are used for the second time) and no buffers * can be released at the moment. * Both pointers in this structure are NULL when the * handler is called for the first time after a transfer * is started, because no data has been transferred yet * at this point. In all successive calls the pointers * specify what has been sent (TX) and what has been * received (RX) in the part of transfer that has just * been completed (provided that a given direction is * enabled, see @ref nrfx_i2s_start). * @param[in] status Bit field describing the current status of the transfer. * It can be 0 or a combination of the following flags: * - @ref NRFX_I2S_STATUS_NEXT_BUFFERS_NEEDED */ typedef void (* nrfx_i2s_data_handler_t)(nrfx_i2s_buffers_t const * p_released, uint32_t status); /** * @brief Function for initializing the I2S driver. * * @param[in] p_config Pointer to the structure with initial configuration. * @param[in] handler Data handler provided by the user. Must not be NULL. * * @retval NRFX_SUCCESS If initialization was successful. * @retval NRFX_ERROR_INVALID_STATE If the driver was already initialized. * @retval NRFX_ERROR_INVALID_PARAM If the requested combination of configuration * options is not allowed by the I2S peripheral. */ nrfx_err_t nrfx_i2s_init(nrfx_i2s_config_t const * p_config, nrfx_i2s_data_handler_t handler); /** @brief Function for uninitializing the I2S driver. */ void nrfx_i2s_uninit(void); /** * @brief Function for starting the continuous I2S transfer. * * The I2S data transfer can be performed in one of three modes: RX (reception) * only, TX (transmission) only, or in both directions simultaneously. * The mode is selected by specifying a proper buffer for a given direction * in the call to this function or by passing NULL instead if this direction * should be disabled. * * The length of the buffer (which is a common value for RX and TX if both * directions are enabled) is specified in 32-bit words. One 32-bit memory * word can either contain four 8-bit samples, two 16-bit samples, or one * right-aligned 24-bit sample sign-extended to a 32-bit value. * For a detailed memory mapping for different supported configurations, * see the @linkProductSpecification52. * * @note Peripherals using EasyDMA (including I2S) require the transfer buffers * to be placed in the Data RAM region. If this condition is not met, * this function will fail with the error code NRFX_ERROR_INVALID_ADDR. * * @param[in] p_initial_buffers Pointer to a structure specifying the buffers * to be used in the initial part of the transfer * (buffers for all consecutive parts are provided * through the data handler). * @param[in] buffer_size Size of the buffers (in 32-bit words). * Must not be 0. * @param[in] flags Transfer options (0 for default settings). * Currently, no additional flags are available. * * @retval NRFX_SUCCESS If the operation was successful. * @retval NRFX_ERROR_INVALID_STATE If a transfer was already started or * the driver has not been initialized. * @retval NRFX_ERROR_INVALID_ADDR If the provided buffers are not placed * in the Data RAM region. */ nrfx_err_t nrfx_i2s_start(nrfx_i2s_buffers_t const * p_initial_buffers, uint16_t buffer_size, uint8_t flags); /** * @brief Function for supplying the buffers to be used in the next part of * the transfer. * * The application should call this function when the data handler receives * @ref NRFX_I2S_STATUS_NEXT_BUFFERS_NEEDED in the @c status parameter. * The call can be done immediately from the data handler function or later, * but it has to be done before the I2S peripheral finishes processing the * buffers supplied previously. Otherwise, data corruption will occur. * * @sa nrfx_i2s_data_handler_t * * @retval NRFX_SUCCESS If the operation was successful. * @retval NRFX_ERROR_INVALID_STATE If the buffers were already supplied or * the peripheral is currently being stopped. */ nrfx_err_t nrfx_i2s_next_buffers_set(nrfx_i2s_buffers_t const * p_buffers); /** @brief Function for stopping the I2S transfer. */ void nrfx_i2s_stop(void); /** @} */ void nrfx_i2s_irq_handler(void); #ifdef __cplusplus } #endif #endif // NRFX_I2S_H__