/** * Copyright (c) 2015 - 2018, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ #ifndef NRF_SPIM_H__ #define NRF_SPIM_H__ #include #ifdef __cplusplus extern "C" { #endif /** * @defgroup nrf_spim_hal SPIM HAL * @{ * @ingroup nrf_spim * @brief Hardware access layer for managing the SPIM peripheral. */ /** * @brief This value can be used as a parameter for the @ref nrf_spim_pins_set * function to specify that a given SPI signal (SCK, MOSI, or MISO) * shall not be connected to a physical pin. */ #define NRF_SPIM_PIN_NOT_CONNECTED 0xFFFFFFFF #if defined(SPIM_DCXCNT_DCXCNT_Msk) || defined(__NRFX_DOXYGEN__) /** * @brief This value specified in the DCX line configuration causes this line * to be set low during whole transmission (all transmitted bytes are * marked as command bytes). Any lower value causes the DCX line to be * switched from low to high after this number of bytes is transmitted * (all remaining bytes are marked as data bytes). */ #define NRF_SPIM_DCX_CNT_ALL_CMD 0xF #endif #define NRF_SPIM_HW_CSN_PRESENT \ (NRFX_CHECK(SPIM0_FEATURE_HARDWARE_CSN_PRESENT) || \ NRFX_CHECK(SPIM1_FEATURE_HARDWARE_CSN_PRESENT) || \ NRFX_CHECK(SPIM2_FEATURE_HARDWARE_CSN_PRESENT) || \ NRFX_CHECK(SPIM3_FEATURE_HARDWARE_CSN_PRESENT)) /** * @brief SPIM tasks. */ typedef enum { /*lint -save -e30*/ NRF_SPIM_TASK_START = offsetof(NRF_SPIM_Type, TASKS_START), ///< Start SPI transaction. NRF_SPIM_TASK_STOP = offsetof(NRF_SPIM_Type, TASKS_STOP), ///< Stop SPI transaction. NRF_SPIM_TASK_SUSPEND = offsetof(NRF_SPIM_Type, TASKS_SUSPEND), ///< Suspend SPI transaction. NRF_SPIM_TASK_RESUME = offsetof(NRF_SPIM_Type, TASKS_RESUME) ///< Resume SPI transaction. /*lint -restore*/ } nrf_spim_task_t; /** * @brief SPIM events. */ typedef enum { /*lint -save -e30*/ NRF_SPIM_EVENT_STOPPED = offsetof(NRF_SPIM_Type, EVENTS_STOPPED), ///< SPI transaction has stopped. NRF_SPIM_EVENT_ENDRX = offsetof(NRF_SPIM_Type, EVENTS_ENDRX), ///< End of RXD buffer reached. NRF_SPIM_EVENT_END = offsetof(NRF_SPIM_Type, EVENTS_END), ///< End of RXD buffer and TXD buffer reached. NRF_SPIM_EVENT_ENDTX = offsetof(NRF_SPIM_Type, EVENTS_ENDTX), ///< End of TXD buffer reached. NRF_SPIM_EVENT_STARTED = offsetof(NRF_SPIM_Type, EVENTS_STARTED) ///< Transaction started. /*lint -restore*/ } nrf_spim_event_t; /** * @brief SPIM shortcuts. */ typedef enum { NRF_SPIM_SHORT_END_START_MASK = SPIM_SHORTS_END_START_Msk, ///< Shortcut between END event and START task. NRF_SPIM_ALL_SHORTS_MASK = SPIM_SHORTS_END_START_Msk ///< All SPIM shortcuts. } nrf_spim_short_mask_t; /** * @brief SPIM interrupts. */ typedef enum { NRF_SPIM_INT_STOPPED_MASK = SPIM_INTENSET_STOPPED_Msk, ///< Interrupt on STOPPED event. NRF_SPIM_INT_ENDRX_MASK = SPIM_INTENSET_ENDRX_Msk, ///< Interrupt on ENDRX event. NRF_SPIM_INT_END_MASK = SPIM_INTENSET_END_Msk, ///< Interrupt on END event. NRF_SPIM_INT_ENDTX_MASK = SPIM_INTENSET_ENDTX_Msk, ///< Interrupt on ENDTX event. NRF_SPIM_INT_STARTED_MASK = SPIM_INTENSET_STARTED_Msk, ///< Interrupt on STARTED event. NRF_SPIM_ALL_INTS_MASK = SPIM_INTENSET_STOPPED_Msk | SPIM_INTENSET_ENDRX_Msk | SPIM_INTENSET_END_Msk | SPIM_INTENSET_ENDTX_Msk | SPIM_INTENSET_STARTED_Msk ///< All SPIM interrupts. } nrf_spim_int_mask_t; /** * @brief SPI master data rates. */ typedef enum { NRF_SPIM_FREQ_125K = SPIM_FREQUENCY_FREQUENCY_K125, ///< 125 kbps. NRF_SPIM_FREQ_250K = SPIM_FREQUENCY_FREQUENCY_K250, ///< 250 kbps. NRF_SPIM_FREQ_500K = SPIM_FREQUENCY_FREQUENCY_K500, ///< 500 kbps. NRF_SPIM_FREQ_1M = SPIM_FREQUENCY_FREQUENCY_M1, ///< 1 Mbps. NRF_SPIM_FREQ_2M = SPIM_FREQUENCY_FREQUENCY_M2, ///< 2 Mbps. NRF_SPIM_FREQ_4M = SPIM_FREQUENCY_FREQUENCY_M4, ///< 4 Mbps. // [conversion to 'int' needed to prevent compilers from complaining // that the provided value (0x80000000UL) is out of range of "int"] NRF_SPIM_FREQ_8M = (int)SPIM_FREQUENCY_FREQUENCY_M8, ///< 8 Mbps. #if defined(SPIM_FREQUENCY_FREQUENCY_M16) || defined(__NRFX_DOXYGEN__) NRF_SPIM_FREQ_16M = SPIM_FREQUENCY_FREQUENCY_M16, ///< 16 Mbps. #endif #if defined(SPIM_FREQUENCY_FREQUENCY_M32) || defined(__NRFX_DOXYGEN__) NRF_SPIM_FREQ_32M = SPIM_FREQUENCY_FREQUENCY_M32 ///< 32 Mbps. #endif } nrf_spim_frequency_t; /** * @brief SPI modes. */ typedef enum { NRF_SPIM_MODE_0, ///< SCK active high, sample on leading edge of clock. NRF_SPIM_MODE_1, ///< SCK active high, sample on trailing edge of clock. NRF_SPIM_MODE_2, ///< SCK active low, sample on leading edge of clock. NRF_SPIM_MODE_3 ///< SCK active low, sample on trailing edge of clock. } nrf_spim_mode_t; /** * @brief SPI bit orders. */ typedef enum { NRF_SPIM_BIT_ORDER_MSB_FIRST = SPIM_CONFIG_ORDER_MsbFirst, ///< Most significant bit shifted out first. NRF_SPIM_BIT_ORDER_LSB_FIRST = SPIM_CONFIG_ORDER_LsbFirst ///< Least significant bit shifted out first. } nrf_spim_bit_order_t; #if (NRF_SPIM_HW_CSN_PRESENT) || defined(__NRFX_DOXYGEN__) /** * @brief SPI CSN pin polarity. */ typedef enum { NRF_SPIM_CSN_POL_LOW = SPIM_CSNPOL_CSNPOL_LOW, ///< Active low (idle state high). NRF_SPIM_CSN_POL_HIGH = SPIM_CSNPOL_CSNPOL_HIGH ///< Active high (idle state low). } nrf_spim_csn_pol_t; #endif // (NRF_SPIM_HW_CSN_PRESENT) || defined(__NRFX_DOXYGEN__) /** * @brief Function for activating a specific SPIM task. * * @param[in] p_reg Pointer to the peripheral registers structure. * @param[in] spim_task Task to activate. */ __STATIC_INLINE void nrf_spim_task_trigger(NRF_SPIM_Type * p_reg, nrf_spim_task_t spim_task); /** * @brief Function for getting the address of a specific SPIM task register. * * @param[in] p_reg Pointer to the peripheral registers structure. * @param[in] spim_task Requested task. * * @return Address of the specified task register. */ __STATIC_INLINE uint32_t nrf_spim_task_address_get(NRF_SPIM_Type * p_reg, nrf_spim_task_t spim_task); /** * @brief Function for clearing a specific SPIM event. * * @param[in] p_reg Pointer to the peripheral registers structure. * @param[in] spim_event Event to clear. */ __STATIC_INLINE void nrf_spim_event_clear(NRF_SPIM_Type * p_reg, nrf_spim_event_t spim_event); /** * @brief Function for checking the state of a specific SPIM event. * * @param[in] p_reg Pointer to the peripheral registers structure. * @param[in] spim_event Event to check. * * @retval true If the event is set. * @retval false If the event is not set. */ __STATIC_INLINE bool nrf_spim_event_check(NRF_SPIM_Type * p_reg, nrf_spim_event_t spim_event); /** * @brief Function for getting the address of a specific SPIM event register. * * @param[in] p_reg Pointer to the peripheral registers structure. * @param[in] spim_event Requested event. * * @return Address of the specified event register. */ __STATIC_INLINE uint32_t nrf_spim_event_address_get(NRF_SPIM_Type * p_reg, nrf_spim_event_t spim_event); /** * @brief Function for enabling specified shortcuts. * * @param[in] p_reg Pointer to the peripheral registers structure. * @param[in] spim_shorts_mask Shortcuts to enable. */ __STATIC_INLINE void nrf_spim_shorts_enable(NRF_SPIM_Type * p_reg, uint32_t spim_shorts_mask); /** * @brief Function for disabling specified shortcuts. * * @param[in] p_reg Pointer to the peripheral registers structure. * @param[in] spim_shorts_mask Shortcuts to disable. */ __STATIC_INLINE void nrf_spim_shorts_disable(NRF_SPIM_Type * p_reg, uint32_t spim_shorts_mask); /** * @brief Function for getting shorts setting. * * @param[in] p_reg Pointer to the peripheral registers structure. */ __STATIC_INLINE uint32_t nrf_spim_shorts_get(NRF_SPIM_Type * p_reg); /** * @brief Function for enabling specified interrupts. * * @param[in] p_reg Pointer to the peripheral registers structure. * @param[in] spim_int_mask Interrupts to enable. */ __STATIC_INLINE void nrf_spim_int_enable(NRF_SPIM_Type * p_reg, uint32_t spim_int_mask); /** * @brief Function for disabling specified interrupts. * * @param[in] p_reg Pointer to the peripheral registers structure. * @param[in] spim_int_mask Interrupts to disable. */ __STATIC_INLINE void nrf_spim_int_disable(NRF_SPIM_Type * p_reg, uint32_t spim_int_mask); /** * @brief Function for retrieving the state of a given interrupt. * * @param[in] p_reg Pointer to the peripheral registers structure. * @param[in] spim_int Interrupt to check. * * @retval true If the interrupt is enabled. * @retval false If the interrupt is not enabled. */ __STATIC_INLINE bool nrf_spim_int_enable_check(NRF_SPIM_Type * p_reg, nrf_spim_int_mask_t spim_int); /** * @brief Function for enabling the SPIM peripheral. * * @param[in] p_reg Pointer to the peripheral registers structure. */ __STATIC_INLINE void nrf_spim_enable(NRF_SPIM_Type * p_reg); /** * @brief Function for disabling the SPIM peripheral. * * @param[in] p_reg Pointer to the peripheral registers structure. */ __STATIC_INLINE void nrf_spim_disable(NRF_SPIM_Type * p_reg); /** * @brief Function for configuring SPIM pins. * * If a given signal is not needed, pass the @ref NRF_SPIM_PIN_NOT_CONNECTED * value instead of its pin number. * * @param[in] p_reg Pointer to the peripheral registers structure. * @param[in] sck_pin SCK pin number. * @param[in] mosi_pin MOSI pin number. * @param[in] miso_pin MISO pin number. */ __STATIC_INLINE void nrf_spim_pins_set(NRF_SPIM_Type * p_reg, uint32_t sck_pin, uint32_t mosi_pin, uint32_t miso_pin); #if (NRF_SPIM_HW_CSN_PRESENT) || defined(__NRFX_DOXYGEN__) /** * @brief Function for configuring the SPIM hardware CSN pin. * * If this signal is not needed, pass the @ref NRF_SPIM_PIN_NOT_CONNECTED * value instead of its pin number. * * @param[in] p_reg Pointer to the peripheral registers structure. * @param[in] pin CSN pin number. * @param[in] polarity CSN pin polarity. * @param[in] duration Minimum duration between the edge of CSN and the edge of SCK * and minimum duration of CSN must stay unselected between transactions. * The value is specified in number of 64 MHz clock cycles (15.625 ns). */ __STATIC_INLINE void nrf_spim_csn_configure(NRF_SPIM_Type * p_reg, uint32_t pin, nrf_spim_csn_pol_t polarity, uint32_t duration); #endif // (NRF_SPIM_HW_CSN_PRESENT) || defined(__NRFX_DOXYGEN__) #if defined(SPIM_PSELDCX_CONNECT_Msk) || defined(__NRFX_DOXYGEN__) /** * @brief Function for configuring the SPIM DCX pin. * * If this signal is not needed, pass the @ref NRF_SPIM_PIN_NOT_CONNECTED * value instead of its pin number. * * @param[in] p_reg Pointer to the peripheral registers structure. * @param[in] dcx_pin DCX pin number. */ __STATIC_INLINE void nrf_spim_dcx_pin_set(NRF_SPIM_Type * p_reg, uint32_t dcx_pin); /** * @brief Function for configuring the number of command bytes. * * Maximum value available for dividing the transmitted bytes into command * bytes and data bytes is @ref NRF_SPIM_DCX_CNT_ALL_CMD - 1. * The @ref NRF_SPIM_DCX_CNT_ALL_CMD value passed as the @c count parameter * causes all transmitted bytes to be marked as command bytes. * * @param[in] p_reg Pointer to the peripheral registers structure. * @param[in] count Number of command bytes preceding the data bytes. */ __STATIC_INLINE void nrf_spim_dcx_cnt_set(NRF_SPIM_Type * p_reg, uint32_t count); #endif // defined(SPIM_PSELDCX_CONNECT_Msk) || defined(__NRFX_DOXYGEN__) #if defined(SPIM_IFTIMING_RXDELAY_RXDELAY_Msk) || defined(__NRFX_DOXYGEN__) /** * @brief Function for configuring the extended SPIM interface. * @param p_reg Pointer to the peripheral registers structure. * @param rxdelay Sample delay for input serial data on MISO, * specified in 64 MHz clock cycles (15.625 ns) from the sampling edge of SCK. */ __STATIC_INLINE void nrf_spim_iftiming_set(NRF_SPIM_Type * p_reg, uint32_t rxdelay); #endif // defined(SPIM_IFTIMING_RXDELAY_RXDELAY_Msk) || defined(__NRFX_DOXYGEN__) #if defined(SPIM_STALLSTAT_RX_Msk) || defined(__NRFX_DOXYGEN__) /** * @brief Function for clearing stall status for RX EasyDMA RAM accesses. * * @param p_reg Pointer to the peripheral registers structure. */ __STATIC_INLINE void nrf_spim_stallstat_rx_clear(NRF_SPIM_Type * p_reg); /** * @brief Function for getting stall status for RX EasyDMA RAM accesses. * * @param p_reg Pointer to the peripheral registers structure. * * @return Stall status of RX EasyDMA RAM accesses. */ __STATIC_INLINE bool nrf_spim_stallstat_rx_get(NRF_SPIM_Type * p_reg); #endif // defined(SPIM_STALLSTAT_RX_Msk) || defined(__NRFX_DOXYGEN__) #if defined(SPIM_STALLSTAT_TX_Msk) || defined(__NRFX_DOXYGEN__) /** * @brief Function for clearing stall status for TX EasyDMA RAM accesses. * * @param p_reg Pointer to the peripheral registers structure. */ __STATIC_INLINE void nrf_spim_stallstat_tx_clear(NRF_SPIM_Type * p_reg); /** * @brief Function for getting stall status for TX EasyDMA RAM accesses. * * @param p_reg Pointer to the peripheral registers structure. * * @return Stall status of TX EasyDMA RAM accesses. */ __STATIC_INLINE bool nrf_spim_stallstat_tx_get(NRF_SPIM_Type * p_reg); #endif // defined(SPIM_STALLSTAT_TX_Msk) || defined(__NRFX_DOXYGEN__) /** * @brief Function for setting the SPI master data rate. * * @param[in] p_reg Pointer to the peripheral registers structure. * @param[in] frequency SPI frequency. */ __STATIC_INLINE void nrf_spim_frequency_set(NRF_SPIM_Type * p_reg, nrf_spim_frequency_t frequency); /** * @brief Function for setting the transmit buffer. * * @param[in] p_reg Pointer to the peripheral registers structure. * @param[in] p_buffer Pointer to the buffer with data to send. * @param[in] length Maximum number of data bytes to transmit. */ __STATIC_INLINE void nrf_spim_tx_buffer_set(NRF_SPIM_Type * p_reg, uint8_t const * p_buffer, size_t length); /** * @brief Function for setting the receive buffer. * * @param[in] p_reg Pointer to the peripheral registers structure. * @param[in] p_buffer Pointer to the buffer for received data. * @param[in] length Maximum number of data bytes to receive. */ __STATIC_INLINE void nrf_spim_rx_buffer_set(NRF_SPIM_Type * p_reg, uint8_t * p_buffer, size_t length); /** * @brief Function for setting the SPI configuration. * * @param[in] p_reg Pointer to the peripheral registers structure. * @param[in] spi_mode SPI mode. * @param[in] spi_bit_order SPI bit order. */ __STATIC_INLINE void nrf_spim_configure(NRF_SPIM_Type * p_reg, nrf_spim_mode_t spi_mode, nrf_spim_bit_order_t spi_bit_order); /** * @brief Function for setting the over-read character. * * @param[in] p_reg Pointer to the peripheral registers structure. * @param[in] orc Over-read character that is clocked out in case of * an over-read of the TXD buffer. */ __STATIC_INLINE void nrf_spim_orc_set(NRF_SPIM_Type * p_reg, uint8_t orc); /** * @brief Function for enabling the TX list feature. * * @param[in] p_reg Pointer to the peripheral registers structure. */ __STATIC_INLINE void nrf_spim_tx_list_enable(NRF_SPIM_Type * p_reg); /** * @brief Function for disabling the TX list feature. * * @param[in] p_reg Pointer to the peripheral registers structure. */ __STATIC_INLINE void nrf_spim_tx_list_disable(NRF_SPIM_Type * p_reg); /** * @brief Function for enabling the RX list feature. * * @param[in] p_reg Pointer to the peripheral registers structure. */ __STATIC_INLINE void nrf_spim_rx_list_enable(NRF_SPIM_Type * p_reg); /** * @brief Function for disabling the RX list feature. * * @param[in] p_reg Pointer to the peripheral registers structure. */ __STATIC_INLINE void nrf_spim_rx_list_disable(NRF_SPIM_Type * p_reg); #ifndef SUPPRESS_INLINE_IMPLEMENTATION __STATIC_INLINE void nrf_spim_task_trigger(NRF_SPIM_Type * p_reg, nrf_spim_task_t spim_task) { *((volatile uint32_t *)((uint8_t *)p_reg + (uint32_t)spim_task)) = 0x1UL; } __STATIC_INLINE uint32_t nrf_spim_task_address_get(NRF_SPIM_Type * p_reg, nrf_spim_task_t spim_task) { return (uint32_t)((uint8_t *)p_reg + (uint32_t)spim_task); } __STATIC_INLINE void nrf_spim_event_clear(NRF_SPIM_Type * p_reg, nrf_spim_event_t spim_event) { *((volatile uint32_t *)((uint8_t *)p_reg + (uint32_t)spim_event)) = 0x0UL; #if __CORTEX_M == 0x04 volatile uint32_t dummy = *((volatile uint32_t *)((uint8_t *)p_reg + (uint32_t)spim_event)); (void)dummy; #endif } __STATIC_INLINE bool nrf_spim_event_check(NRF_SPIM_Type * p_reg, nrf_spim_event_t spim_event) { return (bool)*(volatile uint32_t *)((uint8_t *)p_reg + (uint32_t)spim_event); } __STATIC_INLINE uint32_t nrf_spim_event_address_get(NRF_SPIM_Type * p_reg, nrf_spim_event_t spim_event) { return (uint32_t)((uint8_t *)p_reg + (uint32_t)spim_event); } __STATIC_INLINE void nrf_spim_shorts_enable(NRF_SPIM_Type * p_reg, uint32_t spim_shorts_mask) { p_reg->SHORTS |= spim_shorts_mask; } __STATIC_INLINE void nrf_spim_shorts_disable(NRF_SPIM_Type * p_reg, uint32_t spim_shorts_mask) { p_reg->SHORTS &= ~(spim_shorts_mask); } __STATIC_INLINE uint32_t nrf_spim_shorts_get(NRF_SPIM_Type * p_reg) { return p_reg->SHORTS; } __STATIC_INLINE void nrf_spim_int_enable(NRF_SPIM_Type * p_reg, uint32_t spim_int_mask) { p_reg->INTENSET = spim_int_mask; } __STATIC_INLINE void nrf_spim_int_disable(NRF_SPIM_Type * p_reg, uint32_t spim_int_mask) { p_reg->INTENCLR = spim_int_mask; } __STATIC_INLINE bool nrf_spim_int_enable_check(NRF_SPIM_Type * p_reg, nrf_spim_int_mask_t spim_int) { return (bool)(p_reg->INTENSET & spim_int); } __STATIC_INLINE void nrf_spim_enable(NRF_SPIM_Type * p_reg) { p_reg->ENABLE = (SPIM_ENABLE_ENABLE_Enabled << SPIM_ENABLE_ENABLE_Pos); } __STATIC_INLINE void nrf_spim_disable(NRF_SPIM_Type * p_reg) { p_reg->ENABLE = (SPIM_ENABLE_ENABLE_Disabled << SPIM_ENABLE_ENABLE_Pos); } __STATIC_INLINE void nrf_spim_pins_set(NRF_SPIM_Type * p_reg, uint32_t sck_pin, uint32_t mosi_pin, uint32_t miso_pin) { p_reg->PSEL.SCK = sck_pin; p_reg->PSEL.MOSI = mosi_pin; p_reg->PSEL.MISO = miso_pin; } #if (NRF_SPIM_HW_CSN_PRESENT) __STATIC_INLINE void nrf_spim_csn_configure(NRF_SPIM_Type * p_reg, uint32_t pin, nrf_spim_csn_pol_t polarity, uint32_t duration) { p_reg->PSEL.CSN = pin; p_reg->CSNPOL = polarity; p_reg->IFTIMING.CSNDUR = duration; } #endif // defined(NRF_SPIM_HW_CSN_PRESENT) #if defined(SPIM_PSELDCX_CONNECT_Msk) __STATIC_INLINE void nrf_spim_dcx_pin_set(NRF_SPIM_Type * p_reg, uint32_t dcx_pin) { p_reg->PSELDCX = dcx_pin; } __STATIC_INLINE void nrf_spim_dcx_cnt_set(NRF_SPIM_Type * p_reg, uint32_t dcx_cnt) { p_reg->DCXCNT = dcx_cnt; } #endif // defined(SPIM_PSELDCX_CONNECT_Msk) #if defined(SPIM_IFTIMING_RXDELAY_RXDELAY_Msk) __STATIC_INLINE void nrf_spim_iftiming_set(NRF_SPIM_Type * p_reg, uint32_t rxdelay) { p_reg->IFTIMING.RXDELAY = rxdelay; } #endif // defined(SPIM_IFTIMING_RXDELAY_RXDELAY_Msk) #if defined(SPIM_STALLSTAT_RX_Msk) __STATIC_INLINE void nrf_spim_stallstat_rx_clear(NRF_SPIM_Type * p_reg) { p_reg->STALLSTAT &= ~(SPIM_STALLSTAT_RX_Msk); } __STATIC_INLINE bool nrf_spim_stallstat_rx_get(NRF_SPIM_Type * p_reg) { return (p_reg->STALLSTAT & SPIM_STALLSTAT_RX_Msk) != 0; } #endif // defined(SPIM_STALLSTAT_RX_Msk) #if defined(SPIM_STALLSTAT_TX_Msk) __STATIC_INLINE void nrf_spim_stallstat_tx_clear(NRF_SPIM_Type * p_reg) { p_reg->STALLSTAT &= ~(SPIM_STALLSTAT_TX_Msk); } __STATIC_INLINE bool nrf_spim_stallstat_tx_get(NRF_SPIM_Type * p_reg) { return (p_reg->STALLSTAT & SPIM_STALLSTAT_TX_Msk) != 0; } #endif // defined(SPIM_STALLSTAT_TX_Msk) __STATIC_INLINE void nrf_spim_frequency_set(NRF_SPIM_Type * p_reg, nrf_spim_frequency_t frequency) { p_reg->FREQUENCY = frequency; } __STATIC_INLINE void nrf_spim_tx_buffer_set(NRF_SPIM_Type * p_reg, uint8_t const * p_buffer, size_t length) { p_reg->TXD.PTR = (uint32_t)p_buffer; p_reg->TXD.MAXCNT = length; } __STATIC_INLINE void nrf_spim_rx_buffer_set(NRF_SPIM_Type * p_reg, uint8_t * p_buffer, size_t length) { p_reg->RXD.PTR = (uint32_t)p_buffer; p_reg->RXD.MAXCNT = length; } __STATIC_INLINE void nrf_spim_configure(NRF_SPIM_Type * p_reg, nrf_spim_mode_t spi_mode, nrf_spim_bit_order_t spi_bit_order) { uint32_t config = (spi_bit_order == NRF_SPIM_BIT_ORDER_MSB_FIRST ? SPIM_CONFIG_ORDER_MsbFirst : SPIM_CONFIG_ORDER_LsbFirst); switch (spi_mode) { default: case NRF_SPIM_MODE_0: config |= (SPIM_CONFIG_CPOL_ActiveHigh << SPIM_CONFIG_CPOL_Pos) | (SPIM_CONFIG_CPHA_Leading << SPIM_CONFIG_CPHA_Pos); break; case NRF_SPIM_MODE_1: config |= (SPIM_CONFIG_CPOL_ActiveHigh << SPIM_CONFIG_CPOL_Pos) | (SPIM_CONFIG_CPHA_Trailing << SPIM_CONFIG_CPHA_Pos); break; case NRF_SPIM_MODE_2: config |= (SPIM_CONFIG_CPOL_ActiveLow << SPIM_CONFIG_CPOL_Pos) | (SPIM_CONFIG_CPHA_Leading << SPIM_CONFIG_CPHA_Pos); break; case NRF_SPIM_MODE_3: config |= (SPIM_CONFIG_CPOL_ActiveLow << SPIM_CONFIG_CPOL_Pos) | (SPIM_CONFIG_CPHA_Trailing << SPIM_CONFIG_CPHA_Pos); break; } p_reg->CONFIG = config; } __STATIC_INLINE void nrf_spim_orc_set(NRF_SPIM_Type * p_reg, uint8_t orc) { p_reg->ORC = orc; } __STATIC_INLINE void nrf_spim_tx_list_enable(NRF_SPIM_Type * p_reg) { p_reg->TXD.LIST = 1; } __STATIC_INLINE void nrf_spim_tx_list_disable(NRF_SPIM_Type * p_reg) { p_reg->TXD.LIST = 0; } __STATIC_INLINE void nrf_spim_rx_list_enable(NRF_SPIM_Type * p_reg) { p_reg->RXD.LIST = 1; } __STATIC_INLINE void nrf_spim_rx_list_disable(NRF_SPIM_Type * p_reg) { p_reg->RXD.LIST = 0; } #endif // SUPPRESS_INLINE_IMPLEMENTATION /** @} */ #ifdef __cplusplus } #endif #endif // NRF_SPIM_H__