diff options
| author | David Brownell <dbrownell@users.sourceforge.net> | 2009-11-09 13:16:32 -0800 |
|---|---|---|
| committer | David Brownell <dbrownell@users.sourceforge.net> | 2009-11-09 13:16:32 -0800 |
| commit | d70d9634bf6ab73ec4f2ac1e77012785770b460a (patch) | |
| tree | e2cfbb23ab2a145dbd465832415de867904c247f /tcl/interface | |
| parent | 9253ce9baea6f7b5ef3fc53b4bc0cfbff48194f4 (diff) | |
| download | openocd+libswd-d70d9634bf6ab73ec4f2ac1e77012785770b460a.tar.gz openocd+libswd-d70d9634bf6ab73ec4f2ac1e77012785770b460a.tar.bz2 openocd+libswd-d70d9634bf6ab73ec4f2ac1e77012785770b460a.tar.xz openocd+libswd-d70d9634bf6ab73ec4f2ac1e77012785770b460a.zip | |
finish removing deprecated/obsolete commands
It's been about a year since these were deprecated and, in most
cases, removed. There's no point in carrying that documentation,
or backwards compatibility for "jtag_device" and "jtag_speed",
around forever. (Or a few remnants of obsolete code...)
Removed a few obsolete uses of "jtag_speed":
- The Calao stuff hasn't worked since July 2008. (Those Atmel
targets need to work with a 32KHz core clock after reset until
board-specific init-reset code sets up the PLL and enables a
faster JTAg clock.)
- Parport speed controls don't actually work (tops out at about
1 MHz on typical HW).
- In general, speed controls need to live in board.cfg files (or
sometimes target.cfg files), not interface.cfg ...
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Diffstat (limited to 'tcl/interface')
| -rw-r--r-- | tcl/interface/calao-usb-a9260.cfg | 5 | ||||
| -rw-r--r-- | tcl/interface/openocd-usb.cfg | 3 | ||||
| -rw-r--r-- | tcl/interface/parport.cfg | 1 | ||||
| -rw-r--r-- | tcl/interface/parport_dlc5.cfg | 1 |
4 files changed, 0 insertions, 10 deletions
diff --git a/tcl/interface/calao-usb-a9260.cfg b/tcl/interface/calao-usb-a9260.cfg index 57c68d61..a9d7dec4 100644 --- a/tcl/interface/calao-usb-a9260.cfg +++ b/tcl/interface/calao-usb-a9260.cfg @@ -5,12 +5,7 @@ # # See calao-usb-a9260-c01.cfg and calao-usb-a9260-c02.cfg. # -# Note: You must have an OpenOCD version where jtag_speed sets two values. -# trunk r606 contains the fix for this particular issue which can -# be seen if jtag_speed does not set two separate values. -# -jtag_speed 1200 0 jtag_nsrst_delay 200 jtag_ntrst_delay 200 diff --git a/tcl/interface/openocd-usb.cfg b/tcl/interface/openocd-usb.cfg index 8bb9ffe6..4000b23f 100644 --- a/tcl/interface/openocd-usb.cfg +++ b/tcl/interface/openocd-usb.cfg @@ -9,6 +9,3 @@ ft2232_vid_pid 0x0403 0x6010 ft2232_device_desc "Dual RS232" ft2232_layout "oocdlink" ft2232_latency 2 -# 6/(1+n) Mhz TCLK -jtag_speed 1 - diff --git a/tcl/interface/parport.cfg b/tcl/interface/parport.cfg index 6aaf80b7..2a2668d5 100644 --- a/tcl/interface/parport.cfg +++ b/tcl/interface/parport.cfg @@ -5,5 +5,4 @@ interface parport parport_port 0xc8b8 parport_cable wiggler -jtag_speed 0 diff --git a/tcl/interface/parport_dlc5.cfg b/tcl/interface/parport_dlc5.cfg index defda3f3..0f94c656 100644 --- a/tcl/interface/parport_dlc5.cfg +++ b/tcl/interface/parport_dlc5.cfg @@ -7,5 +7,4 @@ interface parport parport_port /dev/parport0 parport_cable dlc5 -jtag_speed 0 |