diff options
| -rw-r--r-- | src/target/target/at91r40008.cfg | 2 | ||||
| -rw-r--r-- | src/target/target/at91sam9260.cfg | 2 | ||||
| -rw-r--r-- | src/target/target/at91sam9260minimal.cfg | 4 |
3 files changed, 4 insertions, 4 deletions
diff --git a/src/target/target/at91r40008.cfg b/src/target/target/at91r40008.cfg index 48317c86..f8f5d410 100644 --- a/src/target/target/at91r40008.cfg +++ b/src/target/target/at91r40008.cfg @@ -29,7 +29,7 @@ reset_config srst_only srst_pulls_trst #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID set _TARGETNAME [format "%s.cpu" $_CHIPNAME] -target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGENAME -variant arm7tdmi +target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi $_TARGETNAME configure -event gdb-flash-erase-start { diff --git a/src/target/target/at91sam9260.cfg b/src/target/target/at91sam9260.cfg index d7c8833c..05500ab5 100644 --- a/src/target/target/at91sam9260.cfg +++ b/src/target/target/at91sam9260.cfg @@ -9,7 +9,7 @@ source [find target/at91sam9260minimal.cfg] # Target configuration ###################### -$_TARGET_NAME configure -event reset-init { +$_TARGETNAME configure -event reset-init { # at reset chip runs at 32khz jtag_khz 8 mww 0xfffffd08 0xa5000501 # RSTC_MR : enable user reset diff --git a/src/target/target/at91sam9260minimal.cfg b/src/target/target/at91sam9260minimal.cfg index 93114d80..4d51831d 100644 --- a/src/target/target/at91sam9260minimal.cfg +++ b/src/target/target/at91sam9260minimal.cfg @@ -18,7 +18,7 @@ if { [info exists CPUTAPID ] } { set _CPUTAPID $CPUTAPID } else { # force an error till we get a good number - set _CPUTAPID 0xffffffff + set _CPUTAPID 0x0792603f } reset_config trst_and_srst @@ -37,6 +37,6 @@ set _TARGETNAME [format "%s.cpu" $_CHIPNAME] target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs # Internal sram1 memory -$_TARGET_NAME configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1 +$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1 |