summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--tcl/board/topas910.cfg118
-rw-r--r--tcl/board/topasa900.cfg125
-rw-r--r--tcl/target/tmpa900.cfg56
-rw-r--r--tcl/target/tmpa910.cfg56
4 files changed, 355 insertions, 0 deletions
diff --git a/tcl/board/topas910.cfg b/tcl/board/topas910.cfg
new file mode 100644
index 00000000..450a75b8
--- /dev/null
+++ b/tcl/board/topas910.cfg
@@ -0,0 +1,118 @@
+######################################
+# Target: Toshiba TOPAS910 -- TMPA910 Starterkit
+#
+######################################
+
+# We add to the minimal configuration.
+source [find target/tmpa910.cfg]
+
+######################
+# Target configuration
+######################
+
+#$_TARGETNAME configure -event gdb-attach { reset init }
+$_TARGETNAME configure -event reset-init { topas910_init }
+
+proc topas910_init { } {
+# Init PLL
+# my settings
+ mww 0xf005000c 0x00000007
+ mww 0xf0050010 0x00000065
+ mww 0xf005000c 0x000000a7
+ sleep 10
+ mdw 0xf0050008
+ mww 0xf0050008 0x00000002
+ mww 0xf0050004 0x00000000
+# NEW: set CLKCR5
+ mww 0xf0050054 0x00000040
+#
+ sleep 10
+# Init SDRAM
+# _PMCDRV = 0x00000071;
+# //
+# // Initialize SDRAM timing paramater
+# //
+# _DMC_CAS_LATENCY = 0x00000006;
+# _DMC_T_DQSS = 0x00000000;
+# _DMC_T_MRD = 0x00000002;
+# _DMC_T_RAS = 0x00000007;
+#
+# _DMC_T_RC = 0x0000000A;
+# _DMC_T_RCD = 0x00000013;
+#
+# _DMC_T_RFC = 0x0000010A;
+#
+# _DMC_T_RP = 0x00000013;
+# _DMC_T_RRD = 0x00000002;
+# _DMC_T_WR = 0x00000002;
+# _DMC_T_WTR = 0x00000001;
+# _DMC_T_XP = 0x0000000A;
+# _DMC_T_XSR = 0x0000000B;
+# _DMC_T_ESR = 0x00000014;
+#
+# //
+# // Configure SDRAM type parameter
+# _DMC_MEMORY_CFG = 0x00008011;
+# _DMC_USER_CONFIG = 0x00000011;
+# // 32 bit memory interface
+#
+#
+# _DMC_REFRESH_PRD = 0x00000A60;
+# _DMC_CHIP_0_CFG = 0x000140FC;
+#
+# _DMC_DIRECT_CMD = 0x000C0000;
+# _DMC_DIRECT_CMD = 0x00000000;
+#
+# _DMC_DIRECT_CMD = 0x00040000;
+# _DMC_DIRECT_CMD = 0x00040000;
+# _DMC_DIRECT_CMD = 0x00080031;
+# //
+# // Finally start SDRAM
+# //
+# _DMC_MEMC_CMD = MEMC_CMD_GO;
+# */
+
+ mww 0xf0020260 0x00000071
+ mww 0xf4300014 0x00000006
+ mww 0xf4300018 0x00000000
+ mww 0xf430001C 0x00000002
+ mww 0xf4300020 0x00000007
+ mww 0xf4300024 0x0000000A
+ mww 0xf4300028 0x00000013
+ mww 0xf430002C 0x0000010A
+ mww 0xf4300030 0x00000013
+ mww 0xf4300034 0x00000002
+ mww 0xf4300038 0x00000002
+ mww 0xf430003C 0x00000001
+ mww 0xf4300040 0x0000000A
+ mww 0xf4300044 0x0000000B
+ mww 0xf4300048 0x00000014
+ mww 0xf430000C 0x00008011
+ mww 0xf4300304 0x00000011
+ mww 0xf4300010 0x00000A60
+ mww 0xf4300200 0x000140FC
+ mww 0xf4300008 0x000C0000
+ mww 0xf4300008 0x00000000
+ mww 0xf4300008 0x00040000
+ mww 0xf4300008 0x00040000
+ mww 0xf4300008 0x00080031
+ mww 0xf4300004 0x00000000
+
+ sleep 10
+# jtag_speed 10000
+
+# remap off in case of IROM boot
+ mww 0xf0000004 0x00000001
+
+}
+
+# comment the following out if usinf J-Link, it soes not support DCC
+arm7_9 dcc_downloads enable # Enable faster DCC downloads
+
+
+#####################
+# Flash configuration
+#####################
+
+#flash bank cfi <base> <size> <chip width> <bus width> <target#>
+flash bank cfi 0x20000000 0x2000000 2 2 0
diff --git a/tcl/board/topasa900.cfg b/tcl/board/topasa900.cfg
new file mode 100644
index 00000000..9d3ced94
--- /dev/null
+++ b/tcl/board/topasa900.cfg
@@ -0,0 +1,125 @@
+# Thanks to Pieter Conradie for this script!
+# Target: Toshiba TOPAS900 -- TMPA900 Starterkit
+######################################
+
+# We add to the minimal configuration.
+source [find target/tmpa900.cfg]
+
+######################
+# Target configuration
+######################
+
+#$_TARGETNAME configure -event gdb-attach { reset init }
+$_TARGETNAME configure -event reset-init { topasa900_init }
+
+proc topasa900_init { } {
+# Init PLL
+# my settings
+ mww 0xf005000c 0x00000007
+ mww 0xf0050010 0x00000065
+ mww 0xf005000c 0x000000a7
+ sleep 10
+ mdw 0xf0050008
+ mww 0xf0050008 0x00000002
+ mww 0xf0050004 0x00000000
+# NEW: set CLKCR5
+ mww 0xf0050054 0x00000040
+#
+# bplan settings
+# mww 0xf0050004 0x00000000
+# mww 0xf005000c 0x000000a7
+# sleep 10
+# mdw 0xf0050008
+# mww 0xf0050008 0x00000002
+# mww 0xf0050010 0x00000065
+# mww 0xf0050054 0x00000040
+ sleep 10
+# Init SDRAM
+# _PMCDRV = 0x00000071;
+# //
+# // Initialize SDRAM timing paramater
+# //
+# _DMC_CAS_LATENCY = 0x00000006;
+# _DMC_T_DQSS = 0x00000000;
+# _DMC_T_MRD = 0x00000002;
+# _DMC_T_RAS = 0x00000007;
+#
+# _DMC_T_RC = 0x0000000A;
+# _DMC_T_RCD = 0x00000013;
+#
+# _DMC_T_RFC = 0x0000010A;
+#
+# _DMC_T_RP = 0x00000013;
+# _DMC_T_RRD = 0x00000002;
+# _DMC_T_WR = 0x00000002;
+# _DMC_T_WTR = 0x00000001;
+# _DMC_T_XP = 0x0000000A;
+# _DMC_T_XSR = 0x0000000B;
+# _DMC_T_ESR = 0x00000014;
+#
+# //
+# // Configure SDRAM type parameter
+# _DMC_MEMORY_CFG = 0x00008011;
+# _DMC_USER_CONFIG = 0x00000011; // 32 bit memory interface
+#
+#
+# _DMC_REFRESH_PRD = 0x00000A60;
+# _DMC_CHIP_0_CFG = 0x000140FC;
+#
+# _DMC_DIRECT_CMD = 0x000C0000;
+# _DMC_DIRECT_CMD = 0x00000000;
+#
+# _DMC_DIRECT_CMD = 0x00040000;
+# _DMC_DIRECT_CMD = 0x00040000;
+# _DMC_DIRECT_CMD = 0x00080031;
+# //
+# // Finally start SDRAM
+# //
+# _DMC_MEMC_CMD = MEMC_CMD_GO;
+# */
+
+ mww 0xf0020260 0x00000071
+ mww 0xf4300014 0x00000006
+ mww 0xf4300018 0x00000000
+ mww 0xf430001C 0x00000002
+ mww 0xf4300020 0x00000007
+ mww 0xf4300024 0x0000000A
+ mww 0xf4300028 0x00000013
+ mww 0xf430002C 0x0000010A
+ mww 0xf4300030 0x00000013
+ mww 0xf4300034 0x00000002
+ mww 0xf4300038 0x00000002
+ mww 0xf430003C 0x00000001
+ mww 0xf4300040 0x0000000A
+ mww 0xf4300044 0x0000000B
+ mww 0xf4300048 0x00000014
+ mww 0xf430000C 0x00008011
+ mww 0xf4300304 0x00000011
+ mww 0xf4300010 0x00000A60
+ mww 0xf4300200 0x000140FC
+ mww 0xf4300008 0x000C0000
+ mww 0xf4300008 0x00000000
+ mww 0xf4300008 0x00040000
+ mww 0xf4300008 0x00040000
+ mww 0xf4300008 0x00080031
+ mww 0xf4300004 0x00000000
+
+ sleep 10
+# jtag_speed 10000
+
+# remap off in case of IROM boot
+ mww 0xf0000004 0x00000001
+
+}
+
+# comment the following out if usinf J-Link, it soes not support DCC
+arm7_9 dcc_downloads enable # Enable faster DCC downloads
+
+
+#####################
+# Flash configuration
+#####################
+
+#flash bank cfi <base> <size> <chip width> <bus width> <target#>
+flash bank cfi 0x20000000 0x1000000 2 2 0
+
diff --git a/tcl/target/tmpa900.cfg b/tcl/target/tmpa900.cfg
new file mode 100644
index 00000000..1bdf6a1b
--- /dev/null
+++ b/tcl/target/tmpa900.cfg
@@ -0,0 +1,56 @@
+######################################
+# Target: Toshiba TMPA910
+######################################
+
+if { [info exists CHIPNAME] } {
+ set _CHIPNAME $CHIPNAME
+} else {
+ set _CHIPNAME tmpa910
+}
+
+if { [info exists ENDIAN] } {
+ set _ENDIAN $ENDIAN
+} else {
+ set _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+ set _CPUTAPID $CPUTAPID
+} else {
+ # force an error till we get a good number
+ set _CPUTAPID 0x07926031
+}
+
+#TMPA910 has following IDs:
+# CP15.0 register 0x41069265
+# CP15.1 register 0x1d152152
+# ARM core 0x07926031
+
+
+#
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst
+jtag_nsrst_delay 20
+jtag_ntrst_delay 20
+
+######################
+# Target configuration
+######################
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+
+# built-in RAM0
+#working_area 0 0xf8004000 0x4000 nobackup
+# built-in RAM1
+#working_area 1 0xf8008000 0x4000 nobackup
+# built-in RAM2
+#working_area 2 0xf800c000 0x4000 nobackup
+# built-in RAM 0-2 48k total
+#working_area 0 0xf8004000 0xc000 nobackup
+
+# Internal sram1 memory
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0xf8004000 -work-area-size 0x8000 \
+-work-area-backup 0
diff --git a/tcl/target/tmpa910.cfg b/tcl/target/tmpa910.cfg
new file mode 100644
index 00000000..3ed3253b
--- /dev/null
+++ b/tcl/target/tmpa910.cfg
@@ -0,0 +1,56 @@
+######################################
+# Target: Toshiba TMPA910
+######################################
+
+if { [info exists CHIPNAME] } {
+ set _CHIPNAME $CHIPNAME
+} else {
+ set _CHIPNAME tmpa910
+}
+
+if { [info exists ENDIAN] } {
+ set _ENDIAN $ENDIAN
+} else {
+ set _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+ set _CPUTAPID $CPUTAPID
+} else {
+ # force an error till we get a good number
+ set _CPUTAPID 0x07926031
+}
+
+#TMPA910 has following IDs:
+# CP15.0 register 0x41069265
+# CP15.1 register 0x1d152152
+# ARM core 0x07926031
+
+
+#
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst
+jtag_nsrst_delay 20
+jtag_ntrst_delay 20
+
+######################
+# Target configuration
+######################
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+
+# built-in RAM0
+#working_area 0 0xf8004000 0x4000 nobackup
+# built-in RAM1
+#working_area 1 0xf8008000 0x4000 nobackup
+# built-in RAM2
+#working_area 2 0xf800c000 0x4000 nobackup
+# built-in RAM 0-2 48k total
+#working_area 0 0xf8004000 0xc000 nobackup
+
+# Internal sram1 memory
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0xf8004000 -work-area-size 0xc000 \
+-work-area-backup 0