diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/openocd.texi | 25 |
1 files changed, 23 insertions, 2 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index 1c20716c..154ecbca 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -3857,8 +3857,29 @@ explicitly as @option{bin} (binary), @option{ihex} (Intel hex), The relevant flash sectors will be erased prior to programming if the @option{erase} parameter is given. If @option{unlock} is provided, then the flash banks are unlocked before erase and -program. The flash bank to use is inferred from the @var{address} of -each image segment. +program. The flash bank to use is inferred from the address of +each image section. + +@quotation Warning +Be careful using the @option{erase} flag when the flash is holding +data you want to preserve. +Portions of the flash outside those described in the image's +sections might be erased with no notice. +@itemize +@item +When a section of the image being written does not fill out all the +sectors it uses, the unwritten parts of those sectors are necessarily +also erased, because sectors can't be partially erased. +@item +Data stored in sector "holes" between image sections are also affected. +For example, "@command{flash write_image erase ...}" of an image with +one byte at the beginning of a flash bank and one byte at the end +erases the entire bank -- not just the two sectors being written. +@end itemize +Also, when flash protection is important, you must re-apply it after +it has been removed by the @option{unlock} flag. +@end quotation + @end deffn @section Other Flash commands |