diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/openocd.texi | 17 |
1 files changed, 17 insertions, 0 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index 2195de5b..8cea8b0c 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -2804,6 +2804,23 @@ As noted above, the @command{nand device} command allows driver-specific options and behaviors. Some controllers also activate controller-specific commands. +@deffn {NAND Driver} davinci +This driver handles the NAND controllers found on DaVinci family +chips from Texas Instruments. +It takes three extra parameters: +address of the NAND chip; +hardware ECC mode to use (hwecc1, hwecc4, hwecc4_infix); +address of the AEMIF controller on this processor. +@example +nand device davinci dm355.arm 0x02000000 hwecc4 0x01e10000 +@end example +All DaVinci processors support the single-bit ECC hardware, +and newer ones also support the four-bit ECC hardware. +The @code{write_page} and @code{read_page} methods are used +to implement those ECC modes, unless they are disabled using +the @command{nand raw_access} command. +@end deffn + @deffn {NAND Driver} lpc3180 These controllers require an extra @command{nand device} parameter: the clock rate used by the controller. |