diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/openocd.texi | 22 |
1 files changed, 17 insertions, 5 deletions
diff --git a/doc/openocd.texi b/doc/openocd.texi index 154ecbca..02caf5b1 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -288,10 +288,17 @@ chips are starting to become available in JTAG adapters. @* See: @url{http://www.oocdlink.com} By Joern Kaipf @item @b{signalyzer} @* See: @url{http://www.signalyzer.com} -@item @b{evb_lm3s811} -@* See: @url{http://www.luminarymicro.com} - The Stellaris LM3S811 eval board has an FTD2232C chip built in. -@item @b{luminary_icdi} -@* See: @url{http://www.luminarymicro.com} - Luminary In-Circuit Debug Interface (ICDI) Board, included in the Stellaris LM3S9B90 and LM3S9B92 Evaluation Kits. +@item @b{Stellaris Eval Boards} +@* See: @url{http://www.luminarymicro.com} - The Stellaris eval boards +bundle FT2232-based JTAG and SWD support, which can be used to debug +the Stellaris chips. Using separate JTAG adapters is optional. +These boards can also be used as JTAG adapters to other target boards, +disabling the Stellaris chip. +@item @b{Luminary ICDI} +@* See: @url{http://www.luminarymicro.com} - Luminary In-Circuit Debug +Interface (ICDI) Boards are included in Stellaris LM3S9B90 and LM3S9B92 +Evaluation Kits. Like the non-detachable FT2232 support on the other +Stellaris eval boards, they can be used to debug other target boards. @item @b{olimex-jtag} @* See: @url{http://www.olimex.com} @item @b{flyswatter} @@ -1962,7 +1969,12 @@ Currently valid layout @var{name} values include: @item @b{evb_lm3s811} Luminary Micro EVB_LM3S811 as a JTAG interface, either for the local Cortex-M3 (SRST only) or in a passthrough mode (neither SRST nor TRST) -@item @b{luminary_icdi} Luminary In-Circuit Debug Interface (ICDI) Board +This layout can not support the SWO trace mechanism, and should be +used only for older boards (before rev C). +@item @b{luminary_icdi} This layout should be used with most Luminary +eval boards, including Rev C LM3S811 eval boards and the eponymous +ICDI boards, to debug either the local Cortex-M3 or in passthrough mode +to debug some other target. It can support the SWO trace mechanism. @item @b{flyswatter} Tin Can Tools Flyswatter @item @b{icebear} ICEbear JTAG adapter from Section 5 @item @b{jtagkey} Amontec JTAGkey and JTAGkey-Tiny (and compatibles) |