diff options
Diffstat (limited to 'src/target/board')
| -rw-r--r-- | src/target/board/olimex_sam9_l9260.cfg | 10 | ||||
| -rw-r--r-- | src/target/board/unknown-board-atmel-at91sam9260.cfg | 82 |
2 files changed, 92 insertions, 0 deletions
diff --git a/src/target/board/olimex_sam9_l9260.cfg b/src/target/board/olimex_sam9_l9260.cfg new file mode 100644 index 00000000..fbd8f5c0 --- /dev/null +++ b/src/target/board/olimex_sam9_l9260.cfg @@ -0,0 +1,10 @@ +## +# Olimex SAM9-L9260 board configuration file +# +# Date Author Change +# ---- ----- ----- +# 17/Jan/2009 Dean Glazeski Initial Creation +# +## + +source [find target/at91sam9260.cfg] diff --git a/src/target/board/unknown-board-atmel-at91sam9260.cfg b/src/target/board/unknown-board-atmel-at91sam9260.cfg new file mode 100644 index 00000000..05500ab5 --- /dev/null +++ b/src/target/board/unknown-board-atmel-at91sam9260.cfg @@ -0,0 +1,82 @@ +# Thanks to Pieter Conradie for this script! +# Target: Atmel AT91SAM9260 +###################################### + +# We add to the minimal configuration. +source [find target/at91sam9260minimal.cfg] + +###################### +# Target configuration +###################### + +$_TARGETNAME configure -event reset-init { + # at reset chip runs at 32khz + jtag_khz 8 + mww 0xfffffd08 0xa5000501 # RSTC_MR : enable user reset + mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog + + mww 0xfffffc20 0x00004001 # CKGR_MOR : enable the main oscillator + sleep 20 # wait 20 ms + mww 0xfffffc30 0x00000001 # PMC_MCKR : switch to main oscillator + sleep 10 # wait 10 ms + mww 0xfffffc28 0x2060bf09 # CKGR_PLLAR: Set PLLA Register for 198,656MHz + sleep 20 # wait 20 ms + mww 0xfffffc30 0x00000101 # PMC_MCKR : Select prescaler + sleep 10 # wait 10 ms + mww 0xfffffc30 0x00000102 # PMC_MCKR : Clock from PLLA is selected + sleep 10 # wait 10 ms + + # Now run at anything fast... ie: 10mhz! + jtag_khz 10000 # Increase JTAG Speed to 6 MHz + arm7_9 dcc_downloads enable # Enable faster DCC downloads + + mww 0xffffec00 0x01020102 # SMC_SETUP0 : Setup SMC for Intel NOR Flash JS28F128P30T85 128MBit + mww 0xffffec04 0x09070806 # SMC_PULSE0 + mww 0xffffec08 0x000d000b # SMC_CYCLE0 + mww 0xffffec0c 0x00001003 # SMC_MODE0 + + flash probe 0 # Identify flash bank 0 + + mww 0xfffff870 0xffff0000 # PIO_ASR : Select peripheral function for D15..D31 + mww 0xfffff804 0xffff0000 # PIO_PDR : Disable PIO function for D15..D31 + + mww 0xffffef1c 0x2 # EBI_CSA : Assign EBI Chip Select 1 to SDRAM + + #mww 0xffffea08 0x85227259 # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S561632H-UC75 : 4M x 16Bit x 4 Banks) + mww 0xffffea08 0x85227254 # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S641632H-UC75 : 1M x 16Bit x 4 Banks) + + mww 0xffffea00 0x1 # SDRAMC_MR : issue a NOP command + mww 0x20000000 0 + mww 0xffffea00 0x2 # SDRAMC_MR : issue an 'All Banks Precharge' command + mww 0x20000000 0 + mww 0xffffea00 0x4 # SDRAMC_MR : issue 8 x 'Auto-Refresh' Command + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x4 + mww 0x20000000 0 + mww 0xffffea00 0x3 # SDRAMC_MR : issue a 'Load Mode Register' command + mww 0x20000000 0 + mww 0xffffea00 0x0 # SDRAMC_MR : normal mode + mww 0x20000000 0 + mww 0xffffea04 0x5d2 # SDRAMC_TR : Set refresh timer count to 15us +} + + +##################### +# Flash configuration +##################### + +#flash bank cfi <base> <size> <chip width> <bus width> <target#> +flash bank cfi 0x10000000 0x01000000 2 2 0 + |