summaryrefslogtreecommitdiff
path: root/src/target
diff options
context:
space:
mode:
Diffstat (limited to 'src/target')
-rw-r--r--src/target/event/at91sam9260_reset.script116
-rw-r--r--src/target/event/zy1000_reset.script36
-rw-r--r--src/target/target/at91sam9260.cfg66
-rw-r--r--src/target/target/nslu2.cfg44
-rw-r--r--src/target/target/pxa255.cfg172
-rw-r--r--src/target/target/pxa255_sst.cfg26
-rw-r--r--src/target/target/zy1000.cfg60
7 files changed, 260 insertions, 260 deletions
diff --git a/src/target/event/at91sam9260_reset.script b/src/target/event/at91sam9260_reset.script
index 8390d72c..022b4615 100644
--- a/src/target/event/at91sam9260_reset.script
+++ b/src/target/event/at91sam9260_reset.script
@@ -1,58 +1,58 @@
-mww 0xfffffd08 0xa5000501 # RSTC_MR : enable user reset
-mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog
-
-mww 0xfffffc20 0x00004001 # CKGR_MOR : enable the main oscillator
-sleep 20 # wait 20 ms
-mww 0xfffffc30 0x00000001 # PMC_MCKR : switch to main oscillator
-sleep 10 # wait 10 ms
-mww 0xfffffc28 0x2060bf09 # CKGR_PLLAR: Set PLLA Register for 198,656MHz
-sleep 20 # wait 20 ms
-mww 0xfffffc30 0x00000101 # PMC_MCKR : Select prescaler
-sleep 10 # wait 10 ms
-mww 0xfffffc30 0x00000102 # PMC_MCKR : Clock from PLLA is selected
-sleep 10 # wait 10 ms
-
-jtag_speed 0 # Increase JTAG Speed to 6 MHz
-arm7_9 dcc_downloads enable # Enable faster DCC downloads
-
-mww 0xffffec00 0x01020102 # SMC_SETUP0 : Setup SMC for Intel NOR Flash JS28F128P30T85 128MBit
-mww 0xffffec04 0x09070806 # SMC_PULSE0
-mww 0xffffec08 0x000d000b # SMC_CYCLE0
-mww 0xffffec0c 0x00001003 # SMC_MODE0
-
-flash probe 0 # Identify flash bank 0
-
-mww 0xfffff870 0xffff0000 # PIO_ASR : Select peripheral function for D15..D31
-mww 0xfffff804 0xffff0000 # PIO_PDR : Disable PIO function for D15..D31
-
-mww 0xffffef1c 0x2 # EBI_CSA : Assign EBI Chip Select 1 to SDRAM
-
-#mww 0xffffea08 0x85227259 # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S561632H-UC75 : 4M x 16Bit x 4 Banks)
-mww 0xffffea08 0x85227254 # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S641632H-UC75 : 1M x 16Bit x 4 Banks)
-
-mww 0xffffea00 0x1 # SDRAMC_MR : issue a NOP command
-mww 0x20000000 0
-mww 0xffffea00 0x2 # SDRAMC_MR : issue an 'All Banks Precharge' command
-mww 0x20000000 0
-mww 0xffffea00 0x4 # SDRAMC_MR : issue 8 x 'Auto-Refresh' Command
-mww 0x20000000 0
-mww 0xffffea00 0x4
-mww 0x20000000 0
-mww 0xffffea00 0x4
-mww 0x20000000 0
-mww 0xffffea00 0x4
-mww 0x20000000 0
-mww 0xffffea00 0x4
-mww 0x20000000 0
-mww 0xffffea00 0x4
-mww 0x20000000 0
-mww 0xffffea00 0x4
-mww 0x20000000 0
-mww 0xffffea00 0x4
-mww 0x20000000 0
-mww 0xffffea00 0x3 # SDRAMC_MR : issue a 'Load Mode Register' command
-mww 0x20000000 0
-mww 0xffffea00 0x0 # SDRAMC_MR : normal mode
-mww 0x20000000 0
-mww 0xffffea04 0x5d2 # SDRAMC_TR : Set refresh timer count to 15us
-
+mww 0xfffffd08 0xa5000501 # RSTC_MR : enable user reset
+mww 0xfffffd44 0x00008000 # WDT_MR : disable watchdog
+
+mww 0xfffffc20 0x00004001 # CKGR_MOR : enable the main oscillator
+sleep 20 # wait 20 ms
+mww 0xfffffc30 0x00000001 # PMC_MCKR : switch to main oscillator
+sleep 10 # wait 10 ms
+mww 0xfffffc28 0x2060bf09 # CKGR_PLLAR: Set PLLA Register for 198,656MHz
+sleep 20 # wait 20 ms
+mww 0xfffffc30 0x00000101 # PMC_MCKR : Select prescaler
+sleep 10 # wait 10 ms
+mww 0xfffffc30 0x00000102 # PMC_MCKR : Clock from PLLA is selected
+sleep 10 # wait 10 ms
+
+jtag_speed 0 # Increase JTAG Speed to 6 MHz
+arm7_9 dcc_downloads enable # Enable faster DCC downloads
+
+mww 0xffffec00 0x01020102 # SMC_SETUP0 : Setup SMC for Intel NOR Flash JS28F128P30T85 128MBit
+mww 0xffffec04 0x09070806 # SMC_PULSE0
+mww 0xffffec08 0x000d000b # SMC_CYCLE0
+mww 0xffffec0c 0x00001003 # SMC_MODE0
+
+flash probe 0 # Identify flash bank 0
+
+mww 0xfffff870 0xffff0000 # PIO_ASR : Select peripheral function for D15..D31
+mww 0xfffff804 0xffff0000 # PIO_PDR : Disable PIO function for D15..D31
+
+mww 0xffffef1c 0x2 # EBI_CSA : Assign EBI Chip Select 1 to SDRAM
+
+#mww 0xffffea08 0x85227259 # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S561632H-UC75 : 4M x 16Bit x 4 Banks)
+mww 0xffffea08 0x85227254 # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S641632H-UC75 : 1M x 16Bit x 4 Banks)
+
+mww 0xffffea00 0x1 # SDRAMC_MR : issue a NOP command
+mww 0x20000000 0
+mww 0xffffea00 0x2 # SDRAMC_MR : issue an 'All Banks Precharge' command
+mww 0x20000000 0
+mww 0xffffea00 0x4 # SDRAMC_MR : issue 8 x 'Auto-Refresh' Command
+mww 0x20000000 0
+mww 0xffffea00 0x4
+mww 0x20000000 0
+mww 0xffffea00 0x4
+mww 0x20000000 0
+mww 0xffffea00 0x4
+mww 0x20000000 0
+mww 0xffffea00 0x4
+mww 0x20000000 0
+mww 0xffffea00 0x4
+mww 0x20000000 0
+mww 0xffffea00 0x4
+mww 0x20000000 0
+mww 0xffffea00 0x4
+mww 0x20000000 0
+mww 0xffffea00 0x3 # SDRAMC_MR : issue a 'Load Mode Register' command
+mww 0x20000000 0
+mww 0xffffea00 0x0 # SDRAMC_MR : normal mode
+mww 0x20000000 0
+mww 0xffffea04 0x5d2 # SDRAMC_TR : Set refresh timer count to 15us
+
diff --git a/src/target/event/zy1000_reset.script b/src/target/event/zy1000_reset.script
index d48eb402..a3411bf8 100644
--- a/src/target/event/zy1000_reset.script
+++ b/src/target/event/zy1000_reset.script
@@ -1,18 +1,18 @@
-reg cpsr 0x000000D3
-
-mww 0xFFE00000 0x0100273D
-mww 0xFFE00004 0x08002125
-mww 0xFFEe0008 0x02002125
-mww 0xFFE0000c 0x03002125
-mww 0xFFE00010 0x40000000
-mww 0xFFE00014 0x50000000
-mww 0xFFE00018 0x60000000
-mww 0xFFE0001c 0x70000000
-mww 0xFFE00020 0x00000001
-mww 0xFFE00024 0x00000000
-
-mww 0xFFFFF124 0xFFFFFFFF
-mww 0xffff0010 0x100
-mww 0xffff0034 0x100
-
-
+reg cpsr 0x000000D3
+
+mww 0xFFE00000 0x0100273D
+mww 0xFFE00004 0x08002125
+mww 0xFFEe0008 0x02002125
+mww 0xFFE0000c 0x03002125
+mww 0xFFE00010 0x40000000
+mww 0xFFE00014 0x50000000
+mww 0xFFE00018 0x60000000
+mww 0xFFE0001c 0x70000000
+mww 0xFFE00020 0x00000001
+mww 0xFFE00024 0x00000000
+
+mww 0xFFFFF124 0xFFFFFFFF
+mww 0xffff0010 0x100
+mww 0xffff0034 0x100
+
+
diff --git a/src/target/target/at91sam9260.cfg b/src/target/target/at91sam9260.cfg
index ca5c0e19..bdb71fc4 100644
--- a/src/target/target/at91sam9260.cfg
+++ b/src/target/target/at91sam9260.cfg
@@ -1,33 +1,33 @@
-# Thanks to Pieter Conradie for this script!
-# Target: Atmel AT91SAM9260
-######################################
-
-reset_config trst_and_srst
-
-#jtag_device <IR length> <IR capture> <IR mask> <IDCODE instruction>
-jtag_device 4 0x1 0xf 0xe
-
-jtag_nsrst_delay 200
-jtag_ntrst_delay 0
-
-######################
-# Target configuration
-######################
-
-#target <type> <endianess> <reset mode> <JTAG pos> <variant>
-target arm926ejs little reset_init 0 arm926ejs
-
-target_script 0 reset event/at91sam9260_reset.script
-run_and_halt_time 0 30
-
-#working area <target#> <address> <size> <backup|nobackup>
-working_area 0 0x00300000 0x1000 backup
-
-
-#####################
-# Flash configuration
-#####################
-
-#flash bank cfi <base> <size> <chip width> <bus width> <target#>
-flash bank cfi 0x10000000 0x01000000 2 2 0
-
+# Thanks to Pieter Conradie for this script!
+# Target: Atmel AT91SAM9260
+######################################
+
+reset_config trst_and_srst
+
+#jtag_device <IR length> <IR capture> <IR mask> <IDCODE instruction>
+jtag_device 4 0x1 0xf 0xe
+
+jtag_nsrst_delay 200
+jtag_ntrst_delay 0
+
+######################
+# Target configuration
+######################
+
+#target <type> <endianess> <reset mode> <JTAG pos> <variant>
+target arm926ejs little reset_init 0 arm926ejs
+
+target_script 0 reset event/at91sam9260_reset.script
+run_and_halt_time 0 30
+
+#working area <target#> <address> <size> <backup|nobackup>
+working_area 0 0x00300000 0x1000 backup
+
+
+#####################
+# Flash configuration
+#####################
+
+#flash bank cfi <base> <size> <chip width> <bus width> <target#>
+flash bank cfi 0x10000000 0x01000000 2 2 0
+
diff --git a/src/target/target/nslu2.cfg b/src/target/target/nslu2.cfg
index ba6a7973..c82b74e2 100644
--- a/src/target/target/nslu2.cfg
+++ b/src/target/target/nslu2.cfg
@@ -1,22 +1,22 @@
-# use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config srst_only
-
-# jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 7 0x1 0x7f 0x7e
-
-# target configuration
-target xscale big reset_init 0 ixp42x
-run_and_halt_time 0 30
-
-# maps to PXA internal RAM. If you are using a PXA255
-# you must initialize SDRAM or leave this option off
-working_area 0 0x00020000 0x10000 nobackup
-
-# flash bank <driver> <base> <size> <chip_width> <bus_width>
-#flash bank cfi 0x50000000 0x1000000 2 4 0
-
-
-
-
-
+# use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config srst_only
+
+# jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 7 0x1 0x7f 0x7e
+
+# target configuration
+target xscale big reset_init 0 ixp42x
+run_and_halt_time 0 30
+
+# maps to PXA internal RAM. If you are using a PXA255
+# you must initialize SDRAM or leave this option off
+working_area 0 0x00020000 0x10000 nobackup
+
+# flash bank <driver> <base> <size> <chip_width> <bus_width>
+#flash bank cfi 0x50000000 0x1000000 2 4 0
+
+
+
+
+
diff --git a/src/target/target/pxa255.cfg b/src/target/target/pxa255.cfg
index 6666309d..2a452135 100644
--- a/src/target/target/pxa255.cfg
+++ b/src/target/target/pxa255.cfg
@@ -1,86 +1,86 @@
-jtag_device 5 0x1 0x1f 0x1e
-jtag_nsrst_delay 200
-jtag_ntrst_delay 200
-target xscale little reset_init 0 pxa255
-reset_config trst_and_srst
-run_and_halt_time 0 30
-
-target_script 0 reset /ram/pxa255.init
-
-#xscale debug_handler 0 0xFFFF0800 # debug handler base address
-
-trunc /ram/pxa255.init
-append /ram/pxa255.init #configuration file for PXA250 Evaluation Board
-append /ram/pxa255.init # -----------------------------------------------------
-append /ram/pxa255.init #
-append /ram/pxa255.init xscale cp15 15 0x00002001 #Enable CP0 and CP13 access
-append /ram/pxa255.init #
-append /ram/pxa255.init # setup GPIO
-append /ram/pxa255.init #
-append /ram/pxa255.init mww 0x40E00018 0x00008000 #CPSR0
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x40E0001C 0x00000002 #GPSR1
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x40E00020 0x00000008 #GPSR2
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x40E0000C 0x00008000 #GPDR0
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x40E00054 0x80000000 #GAFR0_L
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x40E00058 0x00188010 #GAFR0_H
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x40E0005C 0x60908018 #GAFR1_L
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x40E0000C 0x0280E000 #GPDR0
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x40E00010 0x821C88B2 #GPDR1
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x40E00014 0x000F03DB #GPDR2
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x40E00000 0x000F03DB #GPLR0
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init
-append /ram/pxa255.init
-append /ram/pxa255.init mww 0x40F00004 0x00000020 #PSSR
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init
-append /ram/pxa255.init #
-append /ram/pxa255.init # setup memory controller
-append /ram/pxa255.init #
-append /ram/pxa255.init mww 0x48000008 0x01111998 #MSC0
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x48000010 0x00047ff0 #MSC2
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x48000014 0x00000000 #MECR
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x48000028 0x00010504 #MCMEM0
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x4800002C 0x00010504 #MCMEM1
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x48000030 0x00010504 #MCATT0
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x48000034 0x00010504 #MCATT1
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x48000038 0x00004715 #MCIO0
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x4800003C 0x00004715 #MCIO1
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init #
-append /ram/pxa255.init mww 0x48000004 0x03CA4018 #MDREF
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x48000004 0x004B4018 #MDREF
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x48000004 0x000B4018 #MDREF
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x48000004 0x000BC018 #MDREF
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x48000000 0x00001AC8 #MDCNFG
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init
-append /ram/pxa255.init mww 0x48000000 0x00001AC9 #MDCNFG
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init mww 0x48000040 0x00000000 #MDMRS
-append /ram/pxa255.init sleep 20
-append /ram/pxa255.init
+jtag_device 5 0x1 0x1f 0x1e
+jtag_nsrst_delay 200
+jtag_ntrst_delay 200
+target xscale little reset_init 0 pxa255
+reset_config trst_and_srst
+run_and_halt_time 0 30
+
+target_script 0 reset /ram/pxa255.init
+
+#xscale debug_handler 0 0xFFFF0800 # debug handler base address
+
+trunc /ram/pxa255.init
+append /ram/pxa255.init #configuration file for PXA250 Evaluation Board
+append /ram/pxa255.init # -----------------------------------------------------
+append /ram/pxa255.init #
+append /ram/pxa255.init xscale cp15 15 0x00002001 #Enable CP0 and CP13 access
+append /ram/pxa255.init #
+append /ram/pxa255.init # setup GPIO
+append /ram/pxa255.init #
+append /ram/pxa255.init mww 0x40E00018 0x00008000 #CPSR0
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x40E0001C 0x00000002 #GPSR1
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x40E00020 0x00000008 #GPSR2
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x40E0000C 0x00008000 #GPDR0
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x40E00054 0x80000000 #GAFR0_L
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x40E00058 0x00188010 #GAFR0_H
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x40E0005C 0x60908018 #GAFR1_L
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x40E0000C 0x0280E000 #GPDR0
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x40E00010 0x821C88B2 #GPDR1
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x40E00014 0x000F03DB #GPDR2
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x40E00000 0x000F03DB #GPLR0
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init
+append /ram/pxa255.init
+append /ram/pxa255.init mww 0x40F00004 0x00000020 #PSSR
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init
+append /ram/pxa255.init #
+append /ram/pxa255.init # setup memory controller
+append /ram/pxa255.init #
+append /ram/pxa255.init mww 0x48000008 0x01111998 #MSC0
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x48000010 0x00047ff0 #MSC2
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x48000014 0x00000000 #MECR
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x48000028 0x00010504 #MCMEM0
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x4800002C 0x00010504 #MCMEM1
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x48000030 0x00010504 #MCATT0
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x48000034 0x00010504 #MCATT1
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x48000038 0x00004715 #MCIO0
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x4800003C 0x00004715 #MCIO1
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init #
+append /ram/pxa255.init mww 0x48000004 0x03CA4018 #MDREF
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x48000004 0x004B4018 #MDREF
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x48000004 0x000B4018 #MDREF
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x48000004 0x000BC018 #MDREF
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x48000000 0x00001AC8 #MDCNFG
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init
+append /ram/pxa255.init mww 0x48000000 0x00001AC9 #MDCNFG
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init mww 0x48000040 0x00000000 #MDMRS
+append /ram/pxa255.init sleep 20
+append /ram/pxa255.init
diff --git a/src/target/target/pxa255_sst.cfg b/src/target/target/pxa255_sst.cfg
index 79522f2d..a5fea173 100644
--- a/src/target/target/pxa255_sst.cfg
+++ b/src/target/target/pxa255_sst.cfg
@@ -1,13 +1,13 @@
-# A PXA255 test board with SST 39LF400A flash
-#
-# At reset the memory map is as follows. Note that
-# the memory map changes later on as the application
-# starts...
-#
-# RAM at 0x40000000
-# Flash at 0x00000000
-#
-script /target/pxa255.cfg
-# flash bank <driver> <base> <size> <chip_width> <bus_width> <targetNum> [options]
-flash bank cfi 0x00000000 0x80000 2 2 0 jedec_probe
-working_area 0 0x4000000 0x4000 nobackup 0
+# A PXA255 test board with SST 39LF400A flash
+#
+# At reset the memory map is as follows. Note that
+# the memory map changes later on as the application
+# starts...
+#
+# RAM at 0x40000000
+# Flash at 0x00000000
+#
+script /target/pxa255.cfg
+# flash bank <driver> <base> <size> <chip_width> <bus_width> <targetNum> [options]
+flash bank cfi 0x00000000 0x80000 2 2 0 jedec_probe
+working_area 0 0x4000000 0x4000 nobackup 0
diff --git a/src/target/target/zy1000.cfg b/src/target/target/zy1000.cfg
index e6929f22..5a2fab68 100644
--- a/src/target/target/zy1000.cfg
+++ b/src/target/target/zy1000.cfg
@@ -1,30 +1,30 @@
-#Script for ZY1000
-
-#Atmel ties SRST & TRST together, at which point it makes
-#no sense to use TRST, but use TMS instead.
-#
-#The annoying thing with tying SRST & TRST together is that
-#there is no way to halt the CPU *before and during* the
-#SRST reset, which means that the CPU will run a number
-#of cycles before it can be halted(as much as milliseconds).
-reset_config srst_only srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>
-target arm7tdmi little reset_init 0 arm7tdmi-s_r4
-
-# at CPU CLK <32kHz this must be disabled
-arm7 fast_memory_access enable
-arm7_9 dcc_downloads enable
-
-
-flash bank ecosflash 0x01000000 0x200000 2 2 0 /rom/at91eb40a.elf
-target_script 0 reset event/zy1000_reset.script
-
-# required for usable performance. Used for lots of
-# other things than flash programming.
-working_area 0 0x00000000 0x20000 nobackup
+#Script for ZY1000
+
+#Atmel ties SRST & TRST together, at which point it makes
+#no sense to use TRST, but use TMS instead.
+#
+#The annoying thing with tying SRST & TRST together is that
+#there is no way to halt the CPU *before and during* the
+#SRST reset, which means that the CPU will run a number
+#of cycles before it can be halted(as much as milliseconds).
+reset_config srst_only srst_pulls_trst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+#target configuration
+#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>
+target arm7tdmi little reset_init 0 arm7tdmi-s_r4
+
+# at CPU CLK <32kHz this must be disabled
+arm7 fast_memory_access enable
+arm7_9 dcc_downloads enable
+
+
+flash bank ecosflash 0x01000000 0x200000 2 2 0 /rom/at91eb40a.elf
+target_script 0 reset event/zy1000_reset.script
+
+# required for usable performance. Used for lots of
+# other things than flash programming.
+working_area 0 0x00000000 0x20000 nobackup