summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/jtag/at91rm9200.c2
-rw-r--r--src/target/target/lpc2124.cfg76
-rw-r--r--src/target/target/lpc2378.cfg98
3 files changed, 88 insertions, 88 deletions
diff --git a/src/jtag/at91rm9200.c b/src/jtag/at91rm9200.c
index 17523d87..dce7c7cd 100644
--- a/src/jtag/at91rm9200.c
+++ b/src/jtag/at91rm9200.c
@@ -104,7 +104,7 @@ struct device_t
struct device_t devices[] =
{
{ "rea_ecr", PIOD, P27, PIOA, NC, PIOD, P23, PIOD, P24, PIOD, P26, PIOC, P5 },
- { NULL, 0 }
+ { .name = NULL },
};
/* configuration */
diff --git a/src/target/target/lpc2124.cfg b/src/target/target/lpc2124.cfg
index f8d7e8f6..c780664d 100644
--- a/src/target/target/lpc2124.cfg
+++ b/src/target/target/lpc2124.cfg
@@ -1,38 +1,38 @@
-#LPC-2124 CPU
-
-if { [info exists CHIPNAME] } {
- set _CHIPNAME $CHIPNAME
-} else {
- set _CHIPNAME lpc2124
-}
-
-if { [info exists ENDIAN] } {
- set _ENDIAN $ENDIAN
-} else {
- set _ENDIAN little
-}
-
-if { [info exists CPUTAPID ] } {
- set _CPUTAPID $CPUTAPID
-} else {
- # force an error till we get a good number
- set _CPUTAPID 0x4f1f0f0f
-}
-
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst srst_pulls_trst
-jtag_nsrst_delay 10
-jtag_khz 1000
-
-#jtag scan chain
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
-
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
-
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14745 calc_checksum
+#LPC-2124 CPU
+
+if { [info exists CHIPNAME] } {
+ set _CHIPNAME $CHIPNAME
+} else {
+ set _CHIPNAME lpc2124
+}
+
+if { [info exists ENDIAN] } {
+ set _ENDIAN $ENDIAN
+} else {
+ set _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+ set _CPUTAPID $CPUTAPID
+} else {
+ # force an error till we get a good number
+ set _CPUTAPID 0x4f1f0f0f
+}
+
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst srst_pulls_trst
+jtag_nsrst_delay 10
+jtag_khz 1000
+
+#jtag scan chain
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
+
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
+
+
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14745 calc_checksum
diff --git a/src/target/target/lpc2378.cfg b/src/target/target/lpc2378.cfg
index 386fae07..16232383 100644
--- a/src/target/target/lpc2378.cfg
+++ b/src/target/target/lpc2378.cfg
@@ -1,49 +1,49 @@
-# NXP LPC2378 ARM7TDMI-S with 512kB Flash and 32kB Local On-Chip SRAM (58kB total), clocked with 4MHz internal RC oscillator
-
-if { [info exists CHIPNAME] } {
- set _CHIPNAME $CHIPNAME
-} else {
- set _CHIPNAME lpc2378
-}
-
-if { [info exists ENDIAN] } {
- set _ENDIAN $ENDIAN
-} else {
- set _ENDIAN little
-}
-
-if { [info exists CPUTAPID ] } {
- set _CPUTAPID $CPUTAPID
-} else {
- set _CPUTAPID 0x4f1f0f0f
-}
-
-#delays on reset lines
-jtag_nsrst_delay 200
-jtag_ntrst_delay 200
-
-# LPC2000 -> SRST causes TRST
-reset_config trst_and_srst srst_pulls_trst
-
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
-
-# LPC2378 has 32kB of SRAM on its main system bus (so-called Local On-Chip SRAM)
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x8000 -work-area-backup 0
-
-$_TARGETNAME configure -event reset-init {
- # Force target into ARM state
- soft_reset_halt
- #do not remap 0x0000-0x0020 to anything but the flash
- mwb 0xE01FC040 0x01
-}
-
-# LPC2378 has 512kB of FLASH, but upper 8kB are occupied by bootloader.
-# After reset the chip uses its internal 4MHz RC oscillator
-#flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
-flash bank lpc2000 0x0 0x0007D000 0 0 0 lpc2000_v2 4000 calc_checksum
-
-# 4MHz / 6 = 666kHz, so use 500
-jtag_khz 500
+# NXP LPC2378 ARM7TDMI-S with 512kB Flash and 32kB Local On-Chip SRAM (58kB total), clocked with 4MHz internal RC oscillator
+
+if { [info exists CHIPNAME] } {
+ set _CHIPNAME $CHIPNAME
+} else {
+ set _CHIPNAME lpc2378
+}
+
+if { [info exists ENDIAN] } {
+ set _ENDIAN $ENDIAN
+} else {
+ set _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+ set _CPUTAPID $CPUTAPID
+} else {
+ set _CPUTAPID 0x4f1f0f0f
+}
+
+#delays on reset lines
+jtag_nsrst_delay 200
+jtag_ntrst_delay 200
+
+# LPC2000 -> SRST causes TRST
+reset_config trst_and_srst srst_pulls_trst
+
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
+
+# LPC2378 has 32kB of SRAM on its main system bus (so-called Local On-Chip SRAM)
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x8000 -work-area-backup 0
+
+$_TARGETNAME configure -event reset-init {
+ # Force target into ARM state
+ soft_reset_halt
+ #do not remap 0x0000-0x0020 to anything but the flash
+ mwb 0xE01FC040 0x01
+}
+
+# LPC2378 has 512kB of FLASH, but upper 8kB are occupied by bootloader.
+# After reset the chip uses its internal 4MHz RC oscillator
+#flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
+flash bank lpc2000 0x0 0x0007D000 0 0 0 lpc2000_v2 4000 calc_checksum
+
+# 4MHz / 6 = 666kHz, so use 500
+jtag_khz 500
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-26 08:37:53 +0000