summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/flash/at91sam7.c1948
-rw-r--r--src/flash/flash.c1890
-rw-r--r--src/flash/flash.h194
-rw-r--r--src/flash/lpc2000.c1364
-rw-r--r--src/flash/lpc3180_nand_controller.c1830
-rw-r--r--src/flash/nand.c3028
-rw-r--r--src/flash/stellaris.c1870
-rw-r--r--src/flash/stm32x.c1976
-rw-r--r--src/flash/str7x.c1608
-rw-r--r--src/flash/str9x.c1248
-rw-r--r--src/flash/str9xpec.c2696
-rw-r--r--src/helper/interpreter.c486
-rw-r--r--src/server/gdb_server.c4214
13 files changed, 12176 insertions, 12176 deletions
diff --git a/src/flash/at91sam7.c b/src/flash/at91sam7.c
index a9776d48..a1f055f0 100644
--- a/src/flash/at91sam7.c
+++ b/src/flash/at91sam7.c
@@ -1,975 +1,975 @@
-/***************************************************************************
- * Copyright (C) 2006 by Magnus Lundin *
- * lundin@mlu.mine.nu *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- ***************************************************************************/
-
-/***************************************************************************
-There are some things to notice
-
-* AT91SAM7S64 is tested
-* All AT91SAM7Sxx and AT91SAM7Xxx should work but is not tested
-* All parameters are identified from onchip configuartion registers
-*
-* The flash controller handles erases automatically on a page (128/265 byte) basis
-* Only an EraseAll command is supported by the controller
-* Partial erases can be implemented in software by writing one 0xFFFFFFFF word to
-* some location in every page in the region to be erased
-*
-* Lock regions (sectors) are 32 or 64 pages
-*
- ***************************************************************************/
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "replacements.h"
-
-#include "at91sam7.h"
-
-#include "flash.h"
-#include "target.h"
-#include "log.h"
-#include "binarybuffer.h"
-#include "types.h"
-
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-int at91sam7_register_commands(struct command_context_s *cmd_ctx);
-int at91sam7_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
-int at91sam7_erase(struct flash_bank_s *bank, int first, int last);
-int at91sam7_protect(struct flash_bank_s *bank, int set, int first, int last);
-int at91sam7_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
-int at91sam7_probe(struct flash_bank_s *bank);
-int at91sam7_auto_probe(struct flash_bank_s *bank);
-int at91sam7_erase_check(struct flash_bank_s *bank);
-int at91sam7_protect_check(struct flash_bank_s *bank);
-int at91sam7_info(struct flash_bank_s *bank, char *buf, int buf_size);
-
-u32 at91sam7_get_flash_status(flash_bank_t *bank, u8 flashplane);
-void at91sam7_set_flash_mode(flash_bank_t *bank, u8 flashplane, int mode);
-u32 at91sam7_wait_status_busy(flash_bank_t *bank, u8 flashplane, u32 waitbits, int timeout);
-int at91sam7_flash_command(struct flash_bank_s *bank, u8 flashplane, u8 cmd, u16 pagen);
-int at91sam7_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-
-flash_driver_t at91sam7_flash =
-{
- .name = "at91sam7",
- .register_commands = at91sam7_register_commands,
- .flash_bank_command = at91sam7_flash_bank_command,
- .erase = at91sam7_erase,
- .protect = at91sam7_protect,
- .write = at91sam7_write,
- .probe = at91sam7_probe,
- .auto_probe = at91sam7_auto_probe,
- .erase_check = at91sam7_erase_check,
- .protect_check = at91sam7_protect_check,
- .info = at91sam7_info
-};
-
-u32 MC_FMR[4] = { 0xFFFFFF60, 0xFFFFFF70, 0xFFFFFF80, 0xFFFFFF90 };
-u32 MC_FCR[4] = { 0xFFFFFF64, 0xFFFFFF74, 0xFFFFFF84, 0xFFFFFF94 };
-u32 MC_FSR[4] = { 0xFFFFFF68, 0xFFFFFF78, 0xFFFFFF88, 0xFFFFFF98 };
-
-char * EPROC[8]= {"Unknown","ARM946-E","ARM7TDMI","Unknown","ARM920T","ARM926EJ-S","Unknown","Unknown"};
-long NVPSIZ[16] = {
- 0,
- 0x2000, /* 8K */
- 0x4000, /* 16K */
- 0x8000, /* 32K */
- -1,
- 0x10000, /* 64K */
- -1,
- 0x20000, /* 128K */
- -1,
- 0x40000, /* 256K */
- 0x80000, /* 512K */
- -1,
- 0x100000, /* 1024K */
- -1,
- 0x200000, /* 2048K */
- -1
-};
-
-long SRAMSIZ[16] = {
- -1,
- 0x0400, /* 1K */
- 0x0800, /* 2K */
- -1,
- 0x1c000, /* 112K */
- 0x1000, /* 4K */
- 0x14000, /* 80K */
- 0x28000, /* 160K */
- 0x2000, /* 8K */
- 0x4000, /* 16K */
- 0x8000, /* 32K */
- 0x10000, /* 64K */
- 0x20000, /* 128K */
- 0x40000, /* 256K */
- 0x18000, /* 96K */
- 0x80000, /* 512K */
-};
-
-int at91sam7_register_commands(struct command_context_s *cmd_ctx)
-{
- command_t *at91sam7_cmd = register_command(cmd_ctx, NULL, "at91sam7", NULL, COMMAND_ANY, NULL);
- register_command(cmd_ctx, at91sam7_cmd, "gpnvm", at91sam7_handle_gpnvm_command, COMMAND_EXEC,
- "at91sam7 gpnvm <num> <bit> set|clear, set or clear at91sam7 gpnvm bit");
-
- return ERROR_OK;
-}
-
-u32 at91sam7_get_flash_status(flash_bank_t *bank, u8 flashplane)
-{
- target_t *target = bank->target;
- u32 fsr;
-
- target_read_u32(target, MC_FSR[flashplane], &fsr);
-
- return fsr;
-}
-
-/** Read clock configuration and set at91sam7_info->usec_clocks*/
-void at91sam7_read_clock_info(flash_bank_t *bank)
-{
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- target_t *target = bank->target;
- u32 mckr, mcfr, pllr;
- unsigned long tmp = 0, mainfreq;
- int flashplane;
-
- /* Read main clock freqency register */
- target_read_u32(target, CKGR_MCFR, &mcfr);
- /* Read master clock register */
- target_read_u32(target, PMC_MCKR, &mckr);
- /* Read Clock Generator PLL Register */
- target_read_u32(target, CKGR_PLLR, &pllr);
-
- at91sam7_info->mck_valid = 0;
- switch (mckr & PMC_MCKR_CSS)
- {
- case 0: /* Slow Clock */
- at91sam7_info->mck_valid = 1;
- mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff);
- tmp = mainfreq;
- break;
- case 1: /* Main Clock */
- if (mcfr & CKGR_MCFR_MAINRDY)
- {
- at91sam7_info->mck_valid = 1;
- mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff);
- tmp = mainfreq;
- }
- break;
-
- case 2: /* Reserved */
- break;
- case 3: /* PLL Clock */
- if (mcfr & CKGR_MCFR_MAINRDY)
- {
- target_read_u32(target, CKGR_PLLR, &pllr);
- if (!(pllr & CKGR_PLLR_DIV))
- break; /* 0 Hz */
- at91sam7_info->mck_valid = 1;
- mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff);
- /* Integer arithmetic should have sufficient precision
- as long as PLL is properly configured. */
- tmp = mainfreq / (pllr & CKGR_PLLR_DIV) *
- (((pllr & CKGR_PLLR_MUL) >> 16) + 1);
- }
- break;
- }
-
- /* Prescaler adjust */
- if (((mckr & PMC_MCKR_PRES) >> 2) == 7)
- at91sam7_info->mck_valid = 0;
- else
- at91sam7_info->mck_freq = tmp >> ((mckr & PMC_MCKR_PRES) >> 2);
-
- /* Forget old flash timing */
- for (flashplane = 0; flashplane<at91sam7_info->num_planes; flashplane++)
- {
- at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_NONE);
- }
-}
-
-/* Setup the timimg registers for nvbits or normal flash */
-void at91sam7_set_flash_mode(flash_bank_t *bank, u8 flashplane, int mode)
-{
- u32 fmr, fmcn = 0, fws = 0;
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- target_t *target = bank->target;
-
- if (mode && (mode != at91sam7_info->flashmode[flashplane]))
- {
- /* Always round up (ceil) */
- if (mode==FMR_TIMING_NVBITS)
- {
- if (at91sam7_info->cidr_arch == 0x60)
- {
- /* AT91SAM7A3 uses master clocks in 100 ns */
- fmcn = (at91sam7_info->mck_freq/10000000ul)+1;
- }
- else
- {
- /* master clocks in 1uS for ARCH 0x7 types */
- fmcn = (at91sam7_info->mck_freq/1000000ul)+1;
- }
- }
- else if (mode==FMR_TIMING_FLASH)
- /* main clocks in 1.5uS */
- fmcn = (at91sam7_info->mck_freq/666666ul)+1;
-
- /* Only allow fmcn=0 if clock period is > 30 us = 33kHz. */
- if (at91sam7_info->mck_freq <= 33333ul)
- fmcn = 0;
- /* Only allow fws=0 if clock frequency is < 30 MHz. */
- if (at91sam7_info->mck_freq > 30000000ul)
- fws = 1;
-
- DEBUG("fmcn[%i]: %i", flashplane, fmcn);
- fmr = fmcn << 16 | fws << 8;
- target_write_u32(target, MC_FMR[flashplane], fmr);
- }
-
- at91sam7_info->flashmode[flashplane] = mode;
-}
-
-u32 at91sam7_wait_status_busy(flash_bank_t *bank, u8 flashplane, u32 waitbits, int timeout)
-{
- u32 status;
-
- while ((!((status = at91sam7_get_flash_status(bank,flashplane)) & waitbits)) && (timeout-- > 0))
- {
- DEBUG("status[%i]: 0x%x", flashplane, status);
- usleep(1000);
- }
-
- DEBUG("status[%i]: 0x%x", flashplane, status);
-
- if (status & 0x0C)
- {
- ERROR("status register: 0x%x", status);
- if (status & 0x4)
- ERROR("Lock Error Bit Detected, Operation Abort");
- if (status & 0x8)
- ERROR("Invalid command and/or bad keyword, Operation Abort");
- if (status & 0x10)
- ERROR("Security Bit Set, Operation Abort");
- }
-
- return status;
-}
-
-
-/* Send one command to the AT91SAM flash controller */
-int at91sam7_flash_command(struct flash_bank_s *bank, u8 flashplane, u8 cmd, u16 pagen)
-{
- u32 fcr;
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- target_t *target = bank->target;
-
- fcr = (0x5A<<24) | ((pagen&0x3FF)<<8) | cmd;
- target_write_u32(target, MC_FCR[flashplane], fcr);
- DEBUG("Flash command: 0x%x, flashplane: %i, pagenumber:%u", fcr, flashplane, pagen);
-
- if ((at91sam7_info->cidr_arch == 0x60)&&((cmd==SLB)|(cmd==CLB)))
- {
- /* Lock bit manipulation on AT91SAM7A3 waits for FC_FSR bit 1, EOL */
- if (at91sam7_wait_status_busy(bank, flashplane, MC_FSR_EOL, 10)&0x0C)
- {
- return ERROR_FLASH_OPERATION_FAILED;
- }
- return ERROR_OK;
- }
-
- if (at91sam7_wait_status_busy(bank, flashplane, MC_FSR_FRDY, 10)&0x0C)
- {
- return ERROR_FLASH_OPERATION_FAILED;
- }
- return ERROR_OK;
-}
-
-/* Read device id register, main clock frequency register and fill in driver info structure */
-int at91sam7_read_part_info(struct flash_bank_s *bank)
-{
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- target_t *target = bank->target;
- u32 cidr, status;
- int sectornum;
-
- if (bank->target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- /* Read and parse chip identification register */
- target_read_u32(target, DBGU_CIDR, &cidr);
-
- if (cidr == 0)
- {
- WARNING("Cannot identify target as an AT91SAM");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- at91sam7_info->cidr = cidr;
- at91sam7_info->cidr_ext = (cidr>>31)&0x0001;
- at91sam7_info->cidr_nvptyp = (cidr>>28)&0x0007;
- at91sam7_info->cidr_arch = (cidr>>20)&0x00FF;
- at91sam7_info->cidr_sramsiz = (cidr>>16)&0x000F;
- at91sam7_info->cidr_nvpsiz2 = (cidr>>12)&0x000F;
- at91sam7_info->cidr_nvpsiz = (cidr>>8)&0x000F;
- at91sam7_info->cidr_eproc = (cidr>>5)&0x0007;
- at91sam7_info->cidr_version = cidr&0x001F;
- bank->size = NVPSIZ[at91sam7_info->cidr_nvpsiz];
- at91sam7_info->target_name = "Unknown";
-
- /* Support just for bulk erase of a single flash plane, whole device if flash size <= 256k */
- if (NVPSIZ[at91sam7_info->cidr_nvpsiz]<0x80000) /* Flash size less than 512K, one flash plane */
- {
- bank->num_sectors = 1;
- bank->sectors = malloc(sizeof(flash_sector_t));
- bank->sectors[0].offset = 0;
- bank->sectors[0].size = bank->size;
- bank->sectors[0].is_erased = -1;
- bank->sectors[0].is_protected = -1;
- }
- else /* Flash size 512K or larger, several flash planes */
- {
- bank->num_sectors = NVPSIZ[at91sam7_info->cidr_nvpsiz]/0x40000;
- bank->sectors = malloc(bank->num_sectors*sizeof(flash_sector_t));
- for (sectornum=0; sectornum<bank->num_sectors; sectornum++)
- {
- bank->sectors[sectornum].offset = sectornum*0x40000;
- bank->sectors[sectornum].size = 0x40000;
- bank->sectors[sectornum].is_erased = -1;
- bank->sectors[sectornum].is_protected = -1;
- }
- }
-
-
-
- DEBUG("nvptyp: 0x%3.3x, arch: 0x%4.4x", at91sam7_info->cidr_nvptyp, at91sam7_info->cidr_arch );
-
- /* Read main and master clock freqency register */
- at91sam7_read_clock_info(bank);
-
- at91sam7_info->num_planes = 1;
- status = at91sam7_get_flash_status(bank, 0);
- at91sam7_info->securitybit = (status>>4)&0x01;
- at91sam7_protect_check(bank); /* TODO Check the protect check */
-
- if (at91sam7_info->cidr_arch == 0x70 )
- {
- at91sam7_info->num_nvmbits = 2;
- at91sam7_info->nvmbits = (status>>8)&0x03;
- bank->base = 0x100000;
- bank->bus_width = 4;
- if (bank->size==0x80000) /* AT91SAM7S512 */
- {
- at91sam7_info->target_name = "AT91SAM7S512";
- at91sam7_info->num_planes = 2;
- if (at91sam7_info->num_planes != bank->num_sectors)
- WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");;
- at91sam7_info->num_lockbits = 2*16;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 2*16*64;
- }
- if (bank->size==0x40000) /* AT91SAM7S256 */
- {
- at91sam7_info->target_name = "AT91SAM7S256";
- at91sam7_info->num_lockbits = 16;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 16*64;
- }
- if (bank->size==0x20000) /* AT91SAM7S128 */
- {
- at91sam7_info->target_name = "AT91SAM7S128";
- at91sam7_info->num_lockbits = 8;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 8*64;
- }
- if (bank->size==0x10000) /* AT91SAM7S64 */
- {
- at91sam7_info->target_name = "AT91SAM7S64";
- at91sam7_info->num_lockbits = 16;
- at91sam7_info->pagesize = 128;
- at91sam7_info->pages_in_lockregion = 32;
- at91sam7_info->num_pages = 16*32;
- }
- if (bank->size==0x08000) /* AT91SAM7S321/32 */
- {
- at91sam7_info->target_name = "AT91SAM7S321/32";
- at91sam7_info->num_lockbits = 8;
- at91sam7_info->pagesize = 128;
- at91sam7_info->pages_in_lockregion = 32;
- at91sam7_info->num_pages = 8*32;
- }
-
- return ERROR_OK;
- }
-
- if (at91sam7_info->cidr_arch == 0x71 )
- {
- at91sam7_info->num_nvmbits = 3;
- at91sam7_info->nvmbits = (status>>8)&0x07;
- bank->base = 0x100000;
- bank->bus_width = 4;
- if (bank->size==0x80000) /* AT91SAM7XC512 */
- {
- at91sam7_info->target_name = "AT91SAM7XC512";
- at91sam7_info->num_planes = 2;
- if (at91sam7_info->num_planes != bank->num_sectors)
- WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");;
- at91sam7_info->num_lockbits = 2*16;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 2*16*64;
- }
- if (bank->size==0x40000) /* AT91SAM7XC256 */
- {
- at91sam7_info->target_name = "AT91SAM7XC256";
- at91sam7_info->num_lockbits = 16;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 16*64;
- }
- if (bank->size==0x20000) /* AT91SAM7XC128 */
- {
- at91sam7_info->target_name = "AT91SAM7XC128";
- at91sam7_info->num_lockbits = 8;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 8*64;
- }
-
- return ERROR_OK;
- }
-
- if (at91sam7_info->cidr_arch == 0x72 )
- {
- at91sam7_info->num_nvmbits = 3;
- at91sam7_info->nvmbits = (status>>8)&0x07;
- bank->base = 0x100000;
- bank->bus_width = 4;
- if (bank->size==0x80000) /* AT91SAM7SE512 */
- {
- at91sam7_info->target_name = "AT91SAM7SE512";
- at91sam7_info->num_planes = 2;
- if (at91sam7_info->num_planes != bank->num_sectors)
- WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");;
- at91sam7_info->num_lockbits = 32;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 32*64;
- }
- if (bank->size==0x40000)
- {
- at91sam7_info->target_name = "AT91SAM7SE256";
- at91sam7_info->num_lockbits = 16;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 16*64;
- }
- if (bank->size==0x08000)
- {
- at91sam7_info->target_name = "AT91SAM7SE32";
- at91sam7_info->num_lockbits = 8;
- at91sam7_info->pagesize = 128;
- at91sam7_info->pages_in_lockregion = 32;
- at91sam7_info->num_pages = 8*32;
- }
-
- return ERROR_OK;
- }
-
- if (at91sam7_info->cidr_arch == 0x75 )
- {
- at91sam7_info->num_nvmbits = 3;
- at91sam7_info->nvmbits = (status>>8)&0x07;
- bank->base = 0x100000;
- bank->bus_width = 4;
- if (bank->size==0x80000) /* AT91SAM7X512 */
- {
- at91sam7_info->target_name = "AT91SAM7X512";
- at91sam7_info->num_planes = 2;
- if (at91sam7_info->num_planes != bank->num_sectors)
- WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");;
- at91sam7_info->num_lockbits = 32;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 2*16*64;
- DEBUG("Support for AT91SAM7X512 is experimental in this version!");
- }
- if (bank->size==0x40000) /* AT91SAM7X256 */
- {
- at91sam7_info->target_name = "AT91SAM7X256";
- at91sam7_info->num_lockbits = 16;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 16*64;
- }
- if (bank->size==0x20000) /* AT91SAM7X128 */
- {
- at91sam7_info->target_name = "AT91SAM7X128";
- at91sam7_info->num_lockbits = 8;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 8*64;
- }
-
- return ERROR_OK;
- }
-
- if (at91sam7_info->cidr_arch == 0x60 )
- {
- at91sam7_info->num_nvmbits = 3;
- at91sam7_info->nvmbits = (status>>8)&0x07;
- bank->base = 0x100000;
- bank->bus_width = 4;
-
- if (bank->size == 0x40000) /* AT91SAM7A3 */
- {
- at91sam7_info->target_name = "AT91SAM7A3";
- at91sam7_info->num_lockbits = 16;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 16;
- at91sam7_info->num_pages = 16*64;
- }
- return ERROR_OK;
- }
-
- WARNING("at91sam7 flash only tested for AT91SAM7Sxx series");
-
- return ERROR_OK;
-}
-
-int at91sam7_erase_check(struct flash_bank_s *bank)
-{
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
-
- if (!at91sam7_info->working_area_size)
- {
- }
- else
- {
- }
-
- return ERROR_OK;
-}
-
-int at91sam7_protect_check(struct flash_bank_s *bank)
-{
- u32 status;
- int flashplane;
-
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
-
- if (at91sam7_info->cidr == 0)
- {
- at91sam7_read_part_info(bank);
- }
-
- if (at91sam7_info->cidr == 0)
- {
- WARNING("Cannot identify target as an AT91SAM");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- for (flashplane=0;flashplane<at91sam7_info->num_planes;flashplane++)
- {
- status = at91sam7_get_flash_status(bank, flashplane);
- at91sam7_info->lockbits[flashplane] = (status >> 16);
- }
-
- return ERROR_OK;
-}
-
-/* flash_bank at91sam7 0 0 0 0 <target#>
- */
-int at91sam7_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
-{
- at91sam7_flash_bank_t *at91sam7_info;
- int i;
-
- if (argc < 6)
- {
- WARNING("incomplete flash_bank at91sam7 configuration");
- return ERROR_FLASH_BANK_INVALID;
- }
-
- at91sam7_info = malloc(sizeof(at91sam7_flash_bank_t));
- bank->driver_priv = at91sam7_info;
- at91sam7_info->probed = 0;
-
- /* part wasn't probed for info yet */
- at91sam7_info->cidr = 0;
- for (i=0;i<4;i++)
- at91sam7_info->flashmode[i]=0;
-
- return ERROR_OK;
-}
-
-int at91sam7_erase(struct flash_bank_s *bank, int first, int last)
-{
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- u8 flashplane;
-
- if (bank->target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if (at91sam7_info->cidr == 0)
- {
- at91sam7_read_part_info(bank);
- }
-
- if (at91sam7_info->cidr == 0)
- {
- WARNING("Cannot identify target as an AT91SAM");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- if ((first < 0) || (last < first) || (last >= bank->num_sectors))
- {
- if ((first == 0) && (last == (at91sam7_info->num_lockbits-1)))
- {
- WARNING("Sector numbers based on lockbit count, probably a deprecated script");
- last = bank->num_sectors-1;
- }
- else return ERROR_FLASH_SECTOR_INVALID;
- }
-
- /* Configure the flash controller timing */
- at91sam7_read_clock_info(bank);
- for (flashplane = first; flashplane<=last; flashplane++)
- {
- /* Configure the flash controller timing */
- at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_FLASH);
- if (at91sam7_flash_command(bank, flashplane, EA, 0) != ERROR_OK)
- {
- return ERROR_FLASH_OPERATION_FAILED;
- }
- }
- return ERROR_OK;
-
-}
-
-int at91sam7_protect(struct flash_bank_s *bank, int set, int first, int last)
-{
- u32 cmd, pagen;
- u8 flashplane;
- int lockregion;
-
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
-
- if (bank->target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if ((first < 0) || (last < first) || (last >= at91sam7_info->num_lockbits))
- {
- return ERROR_FLASH_SECTOR_INVALID;
- }
-
- if (at91sam7_info->cidr == 0)
- {
- at91sam7_read_part_info(bank);
- }
-
- if (at91sam7_info->cidr == 0)
- {
- WARNING("Cannot identify target as an AT91SAM");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- at91sam7_read_clock_info(bank);
-
- for (lockregion=first;lockregion<=last;lockregion++)
- {
- pagen = lockregion*at91sam7_info->pages_in_lockregion;
- flashplane = (pagen>>10)&0x03;
- /* Configure the flash controller timing */
- at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_NVBITS);
-
- if (set)
- cmd = SLB;
- else
- cmd = CLB;
-
- if (at91sam7_flash_command(bank, flashplane, cmd, pagen) != ERROR_OK)
- {
- return ERROR_FLASH_OPERATION_FAILED;
- }
- }
-
- at91sam7_protect_check(bank);
-
- return ERROR_OK;
-}
-
-
-int at91sam7_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
-{
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- target_t *target = bank->target;
- u32 dst_min_alignment, wcount, bytes_remaining = count;
- u32 first_page, last_page, pagen, buffer_pos;
- u8 flashplane;
-
- if (at91sam7_info->cidr == 0)
- {
- at91sam7_read_part_info(bank);
- }
-
- if (at91sam7_info->cidr == 0)
- {
- WARNING("Cannot identify target as an AT91SAM");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- if (offset + count > bank->size)
- return ERROR_FLASH_DST_OUT_OF_BANK;
-
- dst_min_alignment = at91sam7_info->pagesize;
-
- if (offset % dst_min_alignment)
- {
- WARNING("offset 0x%x breaks required alignment 0x%x", offset, dst_min_alignment);
- return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
- }
-
- if (at91sam7_info->cidr_arch == 0)
- return ERROR_FLASH_BANK_NOT_PROBED;
-
- first_page = offset/dst_min_alignment;
- last_page = CEIL(offset + count, dst_min_alignment);
-
- DEBUG("first_page: %i, last_page: %i, count %i", first_page, last_page, count);
-
- at91sam7_read_clock_info(bank);
-
- for (pagen=first_page; pagen<last_page; pagen++)
- {
- if (bytes_remaining<dst_min_alignment)
- count = bytes_remaining;
- else
- count = dst_min_alignment;
- bytes_remaining -= count;
-
- /* Write one block to the PageWriteBuffer */
- buffer_pos = (pagen-first_page)*dst_min_alignment;
- wcount = CEIL(count,4);
- target->type->write_memory(target, bank->base+pagen*dst_min_alignment, 4, wcount, buffer+buffer_pos);
- flashplane = (pagen>>10)&0x3;
-
- /* Configure the flash controller timing */
- at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_FLASH);
- /* Send Write Page command to Flash Controller */
- if (at91sam7_flash_command(bank, flashplane, WP, pagen) != ERROR_OK)
- {
- return ERROR_FLASH_OPERATION_FAILED;
- }
- DEBUG("Write flash plane:%i page number:%i", flashplane, pagen);
- }
-
- return ERROR_OK;
-}
-
-
-int at91sam7_probe(struct flash_bank_s *bank)
-{
- /* we can't probe on an at91sam7
- * if this is an at91sam7, it has the configured flash
- */
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- at91sam7_info->probed = 0;
-
- if (at91sam7_info->cidr == 0)
- {
- at91sam7_read_part_info(bank);
- }
-
- if (at91sam7_info->cidr == 0)
- {
- WARNING("Cannot identify target as an AT91SAM");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- at91sam7_info->probed = 1;
-
- return ERROR_OK;
-}
-
-
-int at91sam7_auto_probe(struct flash_bank_s *bank)
-{
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- if (at91sam7_info->probed)
- return ERROR_OK;
- return at91sam7_probe(bank);
-}
-
-int at91sam7_info(struct flash_bank_s *bank, char *buf, int buf_size)
-{
- int printed, flashplane;
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
-
- at91sam7_read_part_info(bank);
-
- if (at91sam7_info->cidr == 0)
- {
- printed = snprintf(buf, buf_size, "Cannot identify target as an AT91SAM\n");
- buf += printed;
- buf_size -= printed;
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- printed = snprintf(buf, buf_size, "\nat91sam7 information: Chip is %s\n",at91sam7_info->target_name);
- buf += printed;
- buf_size -= printed;
-
- printed = snprintf(buf, buf_size, "cidr: 0x%8.8x, arch: 0x%4.4x, eproc: %s, version:0x%3.3x, flashsize: 0x%8.8x\n",
- at91sam7_info->cidr, at91sam7_info->cidr_arch, EPROC[at91sam7_info->cidr_eproc], at91sam7_info->cidr_version, bank->size);
- buf += printed;
- buf_size -= printed;
-
- printed = snprintf(buf, buf_size, "master clock(estimated): %ikHz \n", at91sam7_info->mck_freq / 1000);
- buf += printed;
- buf_size -= printed;
-
- if (at91sam7_info->num_planes>1) {
- printed = snprintf(buf, buf_size, "flashplanes: %i, pagesize: %i, lock regions: %i, pages in lock region: %i \n",
- at91sam7_info->num_planes, at91sam7_info->pagesize, at91sam7_info->num_lockbits, at91sam7_info->num_pages/at91sam7_info->num_lockbits);
- buf += printed;
- buf_size -= printed;
- for (flashplane=0; flashplane<at91sam7_info->num_planes; flashplane++)
- {
- printed = snprintf(buf, buf_size, "lockbits[%i]: 0x%4.4x, ", flashplane, at91sam7_info->lockbits[flashplane]);
- buf += printed;
- buf_size -= printed;
- }
- }
- else
- if (at91sam7_info->num_lockbits>0) {
- printed = snprintf(buf, buf_size, "pagesize: %i, lockbits: %i 0x%4.4x, pages in lock region: %i \n",
- at91sam7_info->pagesize, at91sam7_info->num_lockbits, at91sam7_info->lockbits[0], at91sam7_info->num_pages/at91sam7_info->num_lockbits);
- buf += printed;
- buf_size -= printed;
- }
-
- printed = snprintf(buf, buf_size, "securitybit: %i, nvmbits: 0x%1.1x\n", at91sam7_info->securitybit, at91sam7_info->nvmbits);
- buf += printed;
- buf_size -= printed;
-
- return ERROR_OK;
-}
-
-/*
-* On AT91SAM7S: When the gpnvm bits are set with
-* > at91sam7 gpnvm 0 bitnr set
-* the changes are not visible in the flash controller status register MC_FSR
-* until the processor has been reset.
-* On the Olimex board this requires a power cycle.
-* Note that the AT91SAM7S has the following errata (doc6175.pdf sec 14.1.3):
-* The maximum number of write/erase cycles for Non Volatile Memory bits is 100. This includes
-* Lock Bits (LOCKx), General Purpose NVM bits (GPNVMx) and the Security Bit.
-*/
-int at91sam7_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *bank;
- int bit;
- u8 flashcmd;
- u32 status;
- char *value;
- at91sam7_flash_bank_t *at91sam7_info;
-
- if (argc < 3)
- {
- command_print(cmd_ctx, "at91sam7 gpnvm <num> <bit> <set|clear>");
- return ERROR_OK;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- bit = atoi(args[1]);
- value = args[2];
-
- if (!bank)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- at91sam7_info = bank->driver_priv;
-
- if (bank->target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if (at91sam7_info->cidr == 0)
- {
- at91sam7_read_part_info(bank);
- }
-
- if (at91sam7_info->cidr == 0)
- {
- WARNING("Cannot identify target as an AT91SAM");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- if ((bit<0) || (at91sam7_info->num_nvmbits <= bit))
- {
- command_print(cmd_ctx, "gpnvm bit '#%s' is out of bounds for target %s", args[1],at91sam7_info->target_name);
- return ERROR_OK;
- }
-
- if (strcmp(value, "set") == 0)
- {
- flashcmd = SGPB;
- }
- else if (strcmp(value, "clear") == 0)
- {
- flashcmd = CGPB;
- }
- else
- {
+/***************************************************************************
+ * Copyright (C) 2006 by Magnus Lundin *
+ * lundin@mlu.mine.nu *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+
+/***************************************************************************
+There are some things to notice
+
+* AT91SAM7S64 is tested
+* All AT91SAM7Sxx and AT91SAM7Xxx should work but is not tested
+* All parameters are identified from onchip configuartion registers
+*
+* The flash controller handles erases automatically on a page (128/265 byte) basis
+* Only an EraseAll command is supported by the controller
+* Partial erases can be implemented in software by writing one 0xFFFFFFFF word to
+* some location in every page in the region to be erased
+*
+* Lock regions (sectors) are 32 or 64 pages
+*
+ ***************************************************************************/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "replacements.h"
+
+#include "at91sam7.h"
+
+#include "flash.h"
+#include "target.h"
+#include "log.h"
+#include "binarybuffer.h"
+#include "types.h"
+
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+int at91sam7_register_commands(struct command_context_s *cmd_ctx);
+int at91sam7_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
+int at91sam7_erase(struct flash_bank_s *bank, int first, int last);
+int at91sam7_protect(struct flash_bank_s *bank, int set, int first, int last);
+int at91sam7_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
+int at91sam7_probe(struct flash_bank_s *bank);
+int at91sam7_auto_probe(struct flash_bank_s *bank);
+int at91sam7_erase_check(struct flash_bank_s *bank);
+int at91sam7_protect_check(struct flash_bank_s *bank);
+int at91sam7_info(struct flash_bank_s *bank, char *buf, int buf_size);
+
+u32 at91sam7_get_flash_status(flash_bank_t *bank, u8 flashplane);
+void at91sam7_set_flash_mode(flash_bank_t *bank, u8 flashplane, int mode);
+u32 at91sam7_wait_status_busy(flash_bank_t *bank, u8 flashplane, u32 waitbits, int timeout);
+int at91sam7_flash_command(struct flash_bank_s *bank, u8 flashplane, u8 cmd, u16 pagen);
+int at91sam7_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+
+flash_driver_t at91sam7_flash =
+{
+ .name = "at91sam7",
+ .register_commands = at91sam7_register_commands,
+ .flash_bank_command = at91sam7_flash_bank_command,
+ .erase = at91sam7_erase,
+ .protect = at91sam7_protect,
+ .write = at91sam7_write,
+ .probe = at91sam7_probe,
+ .auto_probe = at91sam7_auto_probe,
+ .erase_check = at91sam7_erase_check,
+ .protect_check = at91sam7_protect_check,
+ .info = at91sam7_info
+};
+
+u32 MC_FMR[4] = { 0xFFFFFF60, 0xFFFFFF70, 0xFFFFFF80, 0xFFFFFF90 };
+u32 MC_FCR[4] = { 0xFFFFFF64, 0xFFFFFF74, 0xFFFFFF84, 0xFFFFFF94 };
+u32 MC_FSR[4] = { 0xFFFFFF68, 0xFFFFFF78, 0xFFFFFF88, 0xFFFFFF98 };
+
+char * EPROC[8]= {"Unknown","ARM946-E","ARM7TDMI","Unknown","ARM920T","ARM926EJ-S","Unknown","Unknown"};
+long NVPSIZ[16] = {
+ 0,
+ 0x2000, /* 8K */
+ 0x4000, /* 16K */
+ 0x8000, /* 32K */
+ -1,
+ 0x10000, /* 64K */
+ -1,
+ 0x20000, /* 128K */
+ -1,
+ 0x40000, /* 256K */
+ 0x80000, /* 512K */
+ -1,
+ 0x100000, /* 1024K */
+ -1,
+ 0x200000, /* 2048K */
+ -1
+};
+
+long SRAMSIZ[16] = {
+ -1,
+ 0x0400, /* 1K */
+ 0x0800, /* 2K */
+ -1,
+ 0x1c000, /* 112K */
+ 0x1000, /* 4K */
+ 0x14000, /* 80K */
+ 0x28000, /* 160K */
+ 0x2000, /* 8K */
+ 0x4000, /* 16K */
+ 0x8000, /* 32K */
+ 0x10000, /* 64K */
+ 0x20000, /* 128K */
+ 0x40000, /* 256K */
+ 0x18000, /* 96K */
+ 0x80000, /* 512K */
+};
+
+int at91sam7_register_commands(struct command_context_s *cmd_ctx)
+{
+ command_t *at91sam7_cmd = register_command(cmd_ctx, NULL, "at91sam7", NULL, COMMAND_ANY, NULL);
+ register_command(cmd_ctx, at91sam7_cmd, "gpnvm", at91sam7_handle_gpnvm_command, COMMAND_EXEC,
+ "at91sam7 gpnvm <num> <bit> set|clear, set or clear at91sam7 gpnvm bit");
+
+ return ERROR_OK;
+}
+
+u32 at91sam7_get_flash_status(flash_bank_t *bank, u8 flashplane)
+{
+ target_t *target = bank->target;
+ u32 fsr;
+
+ target_read_u32(target, MC_FSR[flashplane], &fsr);
+
+ return fsr;
+}
+
+/** Read clock configuration and set at91sam7_info->usec_clocks*/
+void at91sam7_read_clock_info(flash_bank_t *bank)
+{
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ target_t *target = bank->target;
+ u32 mckr, mcfr, pllr;
+ unsigned long tmp = 0, mainfreq;
+ int flashplane;
+
+ /* Read main clock freqency register */
+ target_read_u32(target, CKGR_MCFR, &mcfr);
+ /* Read master clock register */
+ target_read_u32(target, PMC_MCKR, &mckr);
+ /* Read Clock Generator PLL Register */
+ target_read_u32(target, CKGR_PLLR, &pllr);
+
+ at91sam7_info->mck_valid = 0;
+ switch (mckr & PMC_MCKR_CSS)
+ {
+ case 0: /* Slow Clock */
+ at91sam7_info->mck_valid = 1;
+ mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff);
+ tmp = mainfreq;
+ break;
+ case 1: /* Main Clock */
+ if (mcfr & CKGR_MCFR_MAINRDY)
+ {
+ at91sam7_info->mck_valid = 1;
+ mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff);
+ tmp = mainfreq;
+ }
+ break;
+
+ case 2: /* Reserved */
+ break;
+ case 3: /* PLL Clock */
+ if (mcfr & CKGR_MCFR_MAINRDY)
+ {
+ target_read_u32(target, CKGR_PLLR, &pllr);
+ if (!(pllr & CKGR_PLLR_DIV))
+ break; /* 0 Hz */
+ at91sam7_info->mck_valid = 1;
+ mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff);
+ /* Integer arithmetic should have sufficient precision
+ as long as PLL is properly configured. */
+ tmp = mainfreq / (pllr & CKGR_PLLR_DIV) *
+ (((pllr & CKGR_PLLR_MUL) >> 16) + 1);
+ }
+ break;
+ }
+
+ /* Prescaler adjust */
+ if (((mckr & PMC_MCKR_PRES) >> 2) == 7)
+ at91sam7_info->mck_valid = 0;
+ else
+ at91sam7_info->mck_freq = tmp >> ((mckr & PMC_MCKR_PRES) >> 2);
+
+ /* Forget old flash timing */
+ for (flashplane = 0; flashplane<at91sam7_info->num_planes; flashplane++)
+ {
+ at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_NONE);
+ }
+}
+
+/* Setup the timimg registers for nvbits or normal flash */
+void at91sam7_set_flash_mode(flash_bank_t *bank, u8 flashplane, int mode)
+{
+ u32 fmr, fmcn = 0, fws = 0;
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ target_t *target = bank->target;
+
+ if (mode && (mode != at91sam7_info->flashmode[flashplane]))
+ {
+ /* Always round up (ceil) */
+ if (mode==FMR_TIMING_NVBITS)
+ {
+ if (at91sam7_info->cidr_arch == 0x60)
+ {
+ /* AT91SAM7A3 uses master clocks in 100 ns */
+ fmcn = (at91sam7_info->mck_freq/10000000ul)+1;
+ }
+ else
+ {
+ /* master clocks in 1uS for ARCH 0x7 types */
+ fmcn = (at91sam7_info->mck_freq/1000000ul)+1;
+ }
+ }
+ else if (mode==FMR_TIMING_FLASH)
+ /* main clocks in 1.5uS */
+ fmcn = (at91sam7_info->mck_freq/666666ul)+1;
+
+ /* Only allow fmcn=0 if clock period is > 30 us = 33kHz. */
+ if (at91sam7_info->mck_freq <= 33333ul)
+ fmcn = 0;
+ /* Only allow fws=0 if clock frequency is < 30 MHz. */
+ if (at91sam7_info->mck_freq > 30000000ul)
+ fws = 1;
+
+ DEBUG("fmcn[%i]: %i", flashplane, fmcn);
+ fmr = fmcn << 16 | fws << 8;
+ target_write_u32(target, MC_FMR[flashplane], fmr);
+ }
+
+ at91sam7_info->flashmode[flashplane] = mode;
+}
+
+u32 at91sam7_wait_status_busy(flash_bank_t *bank, u8 flashplane, u32 waitbits, int timeout)
+{
+ u32 status;
+
+ while ((!((status = at91sam7_get_flash_status(bank,flashplane)) & waitbits)) && (timeout-- > 0))
+ {
+ DEBUG("status[%i]: 0x%x", flashplane, status);
+ usleep(1000);
+ }
+
+ DEBUG("status[%i]: 0x%x", flashplane, status);
+
+ if (status & 0x0C)
+ {
+ ERROR("status register: 0x%x", status);
+ if (status & 0x4)
+ ERROR("Lock Error Bit Detected, Operation Abort");
+ if (status & 0x8)
+ ERROR("Invalid command and/or bad keyword, Operation Abort");
+ if (status & 0x10)
+ ERROR("Security Bit Set, Operation Abort");
+ }
+
+ return status;
+}
+
+
+/* Send one command to the AT91SAM flash controller */
+int at91sam7_flash_command(struct flash_bank_s *bank, u8 flashplane, u8 cmd, u16 pagen)
+{
+ u32 fcr;
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ target_t *target = bank->target;
+
+ fcr = (0x5A<<24) | ((pagen&0x3FF)<<8) | cmd;
+ target_write_u32(target, MC_FCR[flashplane], fcr);
+ DEBUG("Flash command: 0x%x, flashplane: %i, pagenumber:%u", fcr, flashplane, pagen);
+
+ if ((at91sam7_info->cidr_arch == 0x60)&&((cmd==SLB)|(cmd==CLB)))
+ {
+ /* Lock bit manipulation on AT91SAM7A3 waits for FC_FSR bit 1, EOL */
+ if (at91sam7_wait_status_busy(bank, flashplane, MC_FSR_EOL, 10)&0x0C)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ return ERROR_OK;
+ }
+
+ if (at91sam7_wait_status_busy(bank, flashplane, MC_FSR_FRDY, 10)&0x0C)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ return ERROR_OK;
+}
+
+/* Read device id register, main clock frequency register and fill in driver info structure */
+int at91sam7_read_part_info(struct flash_bank_s *bank)
+{
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ target_t *target = bank->target;
+ u32 cidr, status;
+ int sectornum;
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ /* Read and parse chip identification register */
+ target_read_u32(target, DBGU_CIDR, &cidr);
+
+ if (cidr == 0)
+ {
+ WARNING("Cannot identify target as an AT91SAM");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ at91sam7_info->cidr = cidr;
+ at91sam7_info->cidr_ext = (cidr>>31)&0x0001;
+ at91sam7_info->cidr_nvptyp = (cidr>>28)&0x0007;
+ at91sam7_info->cidr_arch = (cidr>>20)&0x00FF;
+ at91sam7_info->cidr_sramsiz = (cidr>>16)&0x000F;
+ at91sam7_info->cidr_nvpsiz2 = (cidr>>12)&0x000F;
+ at91sam7_info->cidr_nvpsiz = (cidr>>8)&0x000F;
+ at91sam7_info->cidr_eproc = (cidr>>5)&0x0007;
+ at91sam7_info->cidr_version = cidr&0x001F;
+ bank->size = NVPSIZ[at91sam7_info->cidr_nvpsiz];
+ at91sam7_info->target_name = "Unknown";
+
+ /* Support just for bulk erase of a single flash plane, whole device if flash size <= 256k */
+ if (NVPSIZ[at91sam7_info->cidr_nvpsiz]<0x80000) /* Flash size less than 512K, one flash plane */
+ {
+ bank->num_sectors = 1;
+ bank->sectors = malloc(sizeof(flash_sector_t));
+ bank->sectors[0].offset = 0;
+ bank->sectors[0].size = bank->size;
+ bank->sectors[0].is_erased = -1;
+ bank->sectors[0].is_protected = -1;
+ }
+ else /* Flash size 512K or larger, several flash planes */
+ {
+ bank->num_sectors = NVPSIZ[at91sam7_info->cidr_nvpsiz]/0x40000;
+ bank->sectors = malloc(bank->num_sectors*sizeof(flash_sector_t));
+ for (sectornum=0; sectornum<bank->num_sectors; sectornum++)
+ {
+ bank->sectors[sectornum].offset = sectornum*0x40000;
+ bank->sectors[sectornum].size = 0x40000;
+ bank->sectors[sectornum].is_erased = -1;
+ bank->sectors[sectornum].is_protected = -1;
+ }
+ }
+
+
+
+ DEBUG("nvptyp: 0x%3.3x, arch: 0x%4.4x", at91sam7_info->cidr_nvptyp, at91sam7_info->cidr_arch );
+
+ /* Read main and master clock freqency register */
+ at91sam7_read_clock_info(bank);
+
+ at91sam7_info->num_planes = 1;
+ status = at91sam7_get_flash_status(bank, 0);
+ at91sam7_info->securitybit = (status>>4)&0x01;
+ at91sam7_protect_check(bank); /* TODO Check the protect check */
+
+ if (at91sam7_info->cidr_arch == 0x70 )
+ {
+ at91sam7_info->num_nvmbits = 2;
+ at91sam7_info->nvmbits = (status>>8)&0x03;
+ bank->base = 0x100000;
+ bank->bus_width = 4;
+ if (bank->size==0x80000) /* AT91SAM7S512 */
+ {
+ at91sam7_info->target_name = "AT91SAM7S512";
+ at91sam7_info->num_planes = 2;
+ if (at91sam7_info->num_planes != bank->num_sectors)
+ WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");;
+ at91sam7_info->num_lockbits = 2*16;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 2*16*64;
+ }
+ if (bank->size==0x40000) /* AT91SAM7S256 */
+ {
+ at91sam7_info->target_name = "AT91SAM7S256";
+ at91sam7_info->num_lockbits = 16;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 16*64;
+ }
+ if (bank->size==0x20000) /* AT91SAM7S128 */
+ {
+ at91sam7_info->target_name = "AT91SAM7S128";
+ at91sam7_info->num_lockbits = 8;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 8*64;
+ }
+ if (bank->size==0x10000) /* AT91SAM7S64 */
+ {
+ at91sam7_info->target_name = "AT91SAM7S64";
+ at91sam7_info->num_lockbits = 16;
+ at91sam7_info->pagesize = 128;
+ at91sam7_info->pages_in_lockregion = 32;
+ at91sam7_info->num_pages = 16*32;
+ }
+ if (bank->size==0x08000) /* AT91SAM7S321/32 */
+ {
+ at91sam7_info->target_name = "AT91SAM7S321/32";
+ at91sam7_info->num_lockbits = 8;
+ at91sam7_info->pagesize = 128;
+ at91sam7_info->pages_in_lockregion = 32;
+ at91sam7_info->num_pages = 8*32;
+ }
+
+ return ERROR_OK;
+ }
+
+ if (at91sam7_info->cidr_arch == 0x71 )
+ {
+ at91sam7_info->num_nvmbits = 3;
+ at91sam7_info->nvmbits = (status>>8)&0x07;
+ bank->base = 0x100000;
+ bank->bus_width = 4;
+ if (bank->size==0x80000) /* AT91SAM7XC512 */
+ {
+ at91sam7_info->target_name = "AT91SAM7XC512";
+ at91sam7_info->num_planes = 2;
+ if (at91sam7_info->num_planes != bank->num_sectors)
+ WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");;
+ at91sam7_info->num_lockbits = 2*16;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 2*16*64;
+ }
+ if (bank->size==0x40000) /* AT91SAM7XC256 */
+ {
+ at91sam7_info->target_name = "AT91SAM7XC256";
+ at91sam7_info->num_lockbits = 16;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 16*64;
+ }
+ if (bank->size==0x20000) /* AT91SAM7XC128 */
+ {
+ at91sam7_info->target_name = "AT91SAM7XC128";
+ at91sam7_info->num_lockbits = 8;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 8*64;
+ }
+
+ return ERROR_OK;
+ }
+
+ if (at91sam7_info->cidr_arch == 0x72 )
+ {
+ at91sam7_info->num_nvmbits = 3;
+ at91sam7_info->nvmbits = (status>>8)&0x07;
+ bank->base = 0x100000;
+ bank->bus_width = 4;
+ if (bank->size==0x80000) /* AT91SAM7SE512 */
+ {
+ at91sam7_info->target_name = "AT91SAM7SE512";
+ at91sam7_info->num_planes = 2;
+ if (at91sam7_info->num_planes != bank->num_sectors)
+ WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");;
+ at91sam7_info->num_lockbits = 32;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 32*64;
+ }
+ if (bank->size==0x40000)
+ {
+ at91sam7_info->target_name = "AT91SAM7SE256";
+ at91sam7_info->num_lockbits = 16;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 16*64;
+ }
+ if (bank->size==0x08000)
+ {
+ at91sam7_info->target_name = "AT91SAM7SE32";
+ at91sam7_info->num_lockbits = 8;
+ at91sam7_info->pagesize = 128;
+ at91sam7_info->pages_in_lockregion = 32;
+ at91sam7_info->num_pages = 8*32;
+ }
+
+ return ERROR_OK;
+ }
+
+ if (at91sam7_info->cidr_arch == 0x75 )
+ {
+ at91sam7_info->num_nvmbits = 3;
+ at91sam7_info->nvmbits = (status>>8)&0x07;
+ bank->base = 0x100000;
+ bank->bus_width = 4;
+ if (bank->size==0x80000) /* AT91SAM7X512 */
+ {
+ at91sam7_info->target_name = "AT91SAM7X512";
+ at91sam7_info->num_planes = 2;
+ if (at91sam7_info->num_planes != bank->num_sectors)
+ WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");;
+ at91sam7_info->num_lockbits = 32;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 2*16*64;
+ DEBUG("Support for AT91SAM7X512 is experimental in this version!");
+ }
+ if (bank->size==0x40000) /* AT91SAM7X256 */
+ {
+ at91sam7_info->target_name = "AT91SAM7X256";
+ at91sam7_info->num_lockbits = 16;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 16*64;
+ }
+ if (bank->size==0x20000) /* AT91SAM7X128 */
+ {
+ at91sam7_info->target_name = "AT91SAM7X128";
+ at91sam7_info->num_lockbits = 8;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 64;
+ at91sam7_info->num_pages = 8*64;
+ }
+
+ return ERROR_OK;
+ }
+
+ if (at91sam7_info->cidr_arch == 0x60 )
+ {
+ at91sam7_info->num_nvmbits = 3;
+ at91sam7_info->nvmbits = (status>>8)&0x07;
+ bank->base = 0x100000;
+ bank->bus_width = 4;
+
+ if (bank->size == 0x40000) /* AT91SAM7A3 */
+ {
+ at91sam7_info->target_name = "AT91SAM7A3";
+ at91sam7_info->num_lockbits = 16;
+ at91sam7_info->pagesize = 256;
+ at91sam7_info->pages_in_lockregion = 16;
+ at91sam7_info->num_pages = 16*64;
+ }
+ return ERROR_OK;
+ }
+
+ WARNING("at91sam7 flash only tested for AT91SAM7Sxx series");
+
+ return ERROR_OK;
+}
+
+int at91sam7_erase_check(struct flash_bank_s *bank)
+{
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+
+ if (!at91sam7_info->working_area_size)
+ {
+ }
+ else
+ {
+ }
+
+ return ERROR_OK;
+}
+
+int at91sam7_protect_check(struct flash_bank_s *bank)
+{
+ u32 status;
+ int flashplane;
+
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+
+ if (at91sam7_info->cidr == 0)
+ {
+ at91sam7_read_part_info(bank);
+ }
+
+ if (at91sam7_info->cidr == 0)
+ {
+ WARNING("Cannot identify target as an AT91SAM");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ for (flashplane=0;flashplane<at91sam7_info->num_planes;flashplane++)
+ {
+ status = at91sam7_get_flash_status(bank, flashplane);
+ at91sam7_info->lockbits[flashplane] = (status >> 16);
+ }
+
+ return ERROR_OK;
+}
+
+/* flash_bank at91sam7 0 0 0 0 <target#>
+ */
+int at91sam7_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
+{
+ at91sam7_flash_bank_t *at91sam7_info;
+ int i;
+
+ if (argc < 6)
+ {
+ WARNING("incomplete flash_bank at91sam7 configuration");
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ at91sam7_info = malloc(sizeof(at91sam7_flash_bank_t));
+ bank->driver_priv = at91sam7_info;
+ at91sam7_info->probed = 0;
+
+ /* part wasn't probed for info yet */
+ at91sam7_info->cidr = 0;
+ for (i=0;i<4;i++)
+ at91sam7_info->flashmode[i]=0;
+
+ return ERROR_OK;
+}
+
+int at91sam7_erase(struct flash_bank_s *bank, int first, int last)
+{
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ u8 flashplane;
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (at91sam7_info->cidr == 0)
+ {
+ at91sam7_read_part_info(bank);
+ }
+
+ if (at91sam7_info->cidr == 0)
+ {
+ WARNING("Cannot identify target as an AT91SAM");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ if ((first < 0) || (last < first) || (last >= bank->num_sectors))
+ {
+ if ((first == 0) && (last == (at91sam7_info->num_lockbits-1)))
+ {
+ WARNING("Sector numbers based on lockbit count, probably a deprecated script");
+ last = bank->num_sectors-1;
+ }
+ else return ERROR_FLASH_SECTOR_INVALID;
+ }
+
+ /* Configure the flash controller timing */
+ at91sam7_read_clock_info(bank);
+ for (flashplane = first; flashplane<=last; flashplane++)
+ {
+ /* Configure the flash controller timing */
+ at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_FLASH);
+ if (at91sam7_flash_command(bank, flashplane, EA, 0) != ERROR_OK)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ }
+ return ERROR_OK;
+
+}
+
+int at91sam7_protect(struct flash_bank_s *bank, int set, int first, int last)
+{
+ u32 cmd, pagen;
+ u8 flashplane;
+ int lockregion;
+
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if ((first < 0) || (last < first) || (last >= at91sam7_info->num_lockbits))
+ {
+ return ERROR_FLASH_SECTOR_INVALID;
+ }
+
+ if (at91sam7_info->cidr == 0)
+ {
+ at91sam7_read_part_info(bank);
+ }
+
+ if (at91sam7_info->cidr == 0)
+ {
+ WARNING("Cannot identify target as an AT91SAM");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ at91sam7_read_clock_info(bank);
+
+ for (lockregion=first;lockregion<=last;lockregion++)
+ {
+ pagen = lockregion*at91sam7_info->pages_in_lockregion;
+ flashplane = (pagen>>10)&0x03;
+ /* Configure the flash controller timing */
+ at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_NVBITS);
+
+ if (set)
+ cmd = SLB;
+ else
+ cmd = CLB;
+
+ if (at91sam7_flash_command(bank, flashplane, cmd, pagen) != ERROR_OK)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ }
+
+ at91sam7_protect_check(bank);
+
+ return ERROR_OK;
+}
+
+
+int at91sam7_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
+{
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ target_t *target = bank->target;
+ u32 dst_min_alignment, wcount, bytes_remaining = count;
+ u32 first_page, last_page, pagen, buffer_pos;
+ u8 flashplane;
+
+ if (at91sam7_info->cidr == 0)
+ {
+ at91sam7_read_part_info(bank);
+ }
+
+ if (at91sam7_info->cidr == 0)
+ {
+ WARNING("Cannot identify target as an AT91SAM");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ if (offset + count > bank->size)
+ return ERROR_FLASH_DST_OUT_OF_BANK;
+
+ dst_min_alignment = at91sam7_info->pagesize;
+
+ if (offset % dst_min_alignment)
+ {
+ WARNING("offset 0x%x breaks required alignment 0x%x", offset, dst_min_alignment);
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ }
+
+ if (at91sam7_info->cidr_arch == 0)
+ return ERROR_FLASH_BANK_NOT_PROBED;
+
+ first_page = offset/dst_min_alignment;
+ last_page = CEIL(offset + count, dst_min_alignment);
+
+ DEBUG("first_page: %i, last_page: %i, count %i", first_page, last_page, count);
+
+ at91sam7_read_clock_info(bank);
+
+ for (pagen=first_page; pagen<last_page; pagen++)
+ {
+ if (bytes_remaining<dst_min_alignment)
+ count = bytes_remaining;
+ else
+ count = dst_min_alignment;
+ bytes_remaining -= count;
+
+ /* Write one block to the PageWriteBuffer */
+ buffer_pos = (pagen-first_page)*dst_min_alignment;
+ wcount = CEIL(count,4);
+ target->type->write_memory(target, bank->base+pagen*dst_min_alignment, 4, wcount, buffer+buffer_pos);
+ flashplane = (pagen>>10)&0x3;
+
+ /* Configure the flash controller timing */
+ at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_FLASH);
+ /* Send Write Page command to Flash Controller */
+ if (at91sam7_flash_command(bank, flashplane, WP, pagen) != ERROR_OK)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ DEBUG("Write flash plane:%i page number:%i", flashplane, pagen);
+ }
+
+ return ERROR_OK;
+}
+
+
+int at91sam7_probe(struct flash_bank_s *bank)
+{
+ /* we can't probe on an at91sam7
+ * if this is an at91sam7, it has the configured flash
+ */
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ at91sam7_info->probed = 0;
+
+ if (at91sam7_info->cidr == 0)
+ {
+ at91sam7_read_part_info(bank);
+ }
+
+ if (at91sam7_info->cidr == 0)
+ {
+ WARNING("Cannot identify target as an AT91SAM");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ at91sam7_info->probed = 1;
+
+ return ERROR_OK;
+}
+
+
+int at91sam7_auto_probe(struct flash_bank_s *bank)
+{
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ if (at91sam7_info->probed)
+ return ERROR_OK;
+ return at91sam7_probe(bank);
+}
+
+int at91sam7_info(struct flash_bank_s *bank, char *buf, int buf_size)
+{
+ int printed, flashplane;
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+
+ at91sam7_read_part_info(bank);
+
+ if (at91sam7_info->cidr == 0)
+ {
+ printed = snprintf(buf, buf_size, "Cannot identify target as an AT91SAM\n");
+ buf += printed;
+ buf_size -= printed;
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ printed = snprintf(buf, buf_size, "\nat91sam7 information: Chip is %s\n",at91sam7_info->target_name);
+ buf += printed;
+ buf_size -= printed;
+
+ printed = snprintf(buf, buf_size, "cidr: 0x%8.8x, arch: 0x%4.4x, eproc: %s, version:0x%3.3x, flashsize: 0x%8.8x\n",
+ at91sam7_info->cidr, at91sam7_info->cidr_arch, EPROC[at91sam7_info->cidr_eproc], at91sam7_info->cidr_version, bank->size);
+ buf += printed;
+ buf_size -= printed;
+
+ printed = snprintf(buf, buf_size, "master clock(estimated): %ikHz \n", at91sam7_info->mck_freq / 1000);
+ buf += printed;
+ buf_size -= printed;
+
+ if (at91sam7_info->num_planes>1) {
+ printed = snprintf(buf, buf_size, "flashplanes: %i, pagesize: %i, lock regions: %i, pages in lock region: %i \n",
+ at91sam7_info->num_planes, at91sam7_info->pagesize, at91sam7_info->num_lockbits, at91sam7_info->num_pages/at91sam7_info->num_lockbits);
+ buf += printed;
+ buf_size -= printed;
+ for (flashplane=0; flashplane<at91sam7_info->num_planes; flashplane++)
+ {
+ printed = snprintf(buf, buf_size, "lockbits[%i]: 0x%4.4x, ", flashplane, at91sam7_info->lockbits[flashplane]);
+ buf += printed;
+ buf_size -= printed;
+ }
+ }
+ else
+ if (at91sam7_info->num_lockbits>0) {
+ printed = snprintf(buf, buf_size, "pagesize: %i, lockbits: %i 0x%4.4x, pages in lock region: %i \n",
+ at91sam7_info->pagesize, at91sam7_info->num_lockbits, at91sam7_info->lockbits[0], at91sam7_info->num_pages/at91sam7_info->num_lockbits);
+ buf += printed;
+ buf_size -= printed;
+ }
+
+ printed = snprintf(buf, buf_size, "securitybit: %i, nvmbits: 0x%1.1x\n", at91sam7_info->securitybit, at91sam7_info->nvmbits);
+ buf += printed;
+ buf_size -= printed;
+
+ return ERROR_OK;
+}
+
+/*
+* On AT91SAM7S: When the gpnvm bits are set with
+* > at91sam7 gpnvm 0 bitnr set
+* the changes are not visible in the flash controller status register MC_FSR
+* until the processor has been reset.
+* On the Olimex board this requires a power cycle.
+* Note that the AT91SAM7S has the following errata (doc6175.pdf sec 14.1.3):
+* The maximum number of write/erase cycles for Non Volatile Memory bits is 100. This includes
+* Lock Bits (LOCKx), General Purpose NVM bits (GPNVMx) and the Security Bit.
+*/
+int at91sam7_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *bank;
+ int bit;
+ u8 flashcmd;
+ u32 status;
+ char *value;
+ at91sam7_flash_bank_t *at91sam7_info;
+
+ if (argc < 3)
+ {
+ command_print(cmd_ctx, "at91sam7 gpnvm <num> <bit> <set|clear>");
+ return ERROR_OK;
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ bit = atoi(args[1]);
+ value = args[2];
+
+ if (!bank)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ at91sam7_info = bank->driver_priv;
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (at91sam7_info->cidr == 0)
+ {
+ at91sam7_read_part_info(bank);
+ }
+
+ if (at91sam7_info->cidr == 0)
+ {
+ WARNING("Cannot identify target as an AT91SAM");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ if ((bit<0) || (at91sam7_info->num_nvmbits <= bit))
+ {
+ command_print(cmd_ctx, "gpnvm bit '#%s' is out of bounds for target %s", args[1],at91sam7_info->target_name);
+ return ERROR_OK;
+ }
+
+ if (strcmp(value, "set") == 0)
+ {
+ flashcmd = SGPB;
+ }
+ else if (strcmp(value, "clear") == 0)
+ {
+ flashcmd = CGPB;
+ }
+ else
+ {
return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- /* Configure the flash controller timing */
- at91sam7_read_clock_info(bank);
- at91sam7_set_flash_mode(bank, 0, FMR_TIMING_NVBITS);
-
- if (at91sam7_flash_command(bank, 0, flashcmd, (u16)(bit)) != ERROR_OK)
- {
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- status = at91sam7_get_flash_status(bank, 0);
- DEBUG("at91sam7_handle_gpnvm_command: cmd 0x%x, value 0x%x, status 0x%x \n",flashcmd,bit,status);
- at91sam7_info->nvmbits = (status>>8)&((1<<at91sam7_info->num_nvmbits)-1);
-
- return ERROR_OK;
-}
+ }
+
+ /* Configure the flash controller timing */
+ at91sam7_read_clock_info(bank);
+ at91sam7_set_flash_mode(bank, 0, FMR_TIMING_NVBITS);
+
+ if (at91sam7_flash_command(bank, 0, flashcmd, (u16)(bit)) != ERROR_OK)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ status = at91sam7_get_flash_status(bank, 0);
+ DEBUG("at91sam7_handle_gpnvm_command: cmd 0x%x, value 0x%x, status 0x%x \n",flashcmd,bit,status);
+ at91sam7_info->nvmbits = (status>>8)&((1<<at91sam7_info->num_nvmbits)-1);
+
+ return ERROR_OK;
+}
diff --git a/src/flash/flash.c b/src/flash/flash.c
index 416cac44..2fefb4cd 100644
--- a/src/flash/flash.c
+++ b/src/flash/flash.c
@@ -1,945 +1,945 @@
-/***************************************************************************
- * Copyright (C) 2005 by Dominic Rath *
- * Dominic.Rath@gmx.de *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- ***************************************************************************/
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "flash.h"
-#include "command.h"
-#include "target.h"
-#include "time_support.h"
-#include "fileio.h"
-#include "image.h"
-#include "log.h"
-
-#include <string.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <errno.h>
-#include <inttypes.h>
-
-/* command handlers */
-int handle_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_flash_banks_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_flash_info_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_flash_probe_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_flash_erase_check_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_flash_erase_address_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_flash_protect_check_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_flash_erase_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_flash_write_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_flash_write_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_flash_write_image_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_flash_protect_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_flash_auto_erase_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-flash_bank_t *get_flash_bank_by_addr(target_t *target, u32 addr);
-
-/* flash drivers
- */
-extern flash_driver_t lpc2000_flash;
-extern flash_driver_t cfi_flash;
-extern flash_driver_t at91sam7_flash;
-extern flash_driver_t str7x_flash;
-extern flash_driver_t str9x_flash;
-extern flash_driver_t stellaris_flash;
-extern flash_driver_t str9xpec_flash;
-extern flash_driver_t stm32x_flash;
-extern flash_driver_t tms470_flash;
-
-flash_driver_t *flash_drivers[] =
-{
- &lpc2000_flash,
- &cfi_flash,
- &at91sam7_flash,
- &str7x_flash,
- &str9x_flash,
- &stellaris_flash,
- &str9xpec_flash,
- &stm32x_flash,
- &tms470_flash,
- NULL,
-};
-
-flash_bank_t *flash_banks;
-static command_t *flash_cmd;
-static int auto_erase = 0;
-
-/* wafer thin wrapper for invoking the flash driver */
-static int flash_driver_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
-{
- int retval=ERROR_OK;
- if (bank->target->state != TARGET_HALTED)
- {
- ERROR("target not halted - aborting flash write");
- retval=ERROR_TARGET_NOT_HALTED;
- } else
- {
- retval=bank->driver->write(bank, buffer, offset, count);
- }
- if (retval!=ERROR_OK)
- {
- ERROR("Writing to flash bank at address 0x%08x at offset 0x%8.8x", bank->base, offset);
- }
- return retval;
-}
-
-static int flash_driver_erase(struct flash_bank_s *bank, int first, int last)
-{
- int retval=ERROR_OK;
- if (bank->target->state != TARGET_HALTED)
- {
- ERROR("target not halted - aborting flash erase");
- retval=ERROR_TARGET_NOT_HALTED;
- } else if ((first < 0) || (last < first) || (last >= bank->num_sectors))
- {
- ERROR("invalid flash sector");
- retval=ERROR_FLASH_SECTOR_INVALID;
- } else
- {
- retval=bank->driver->erase(bank, first, last);
- }
- if (retval!=ERROR_OK)
- {
- ERROR("Failed erasing banks %d to %d", first, last);
- }
- return retval;
-}
-
-int flash_driver_protect(struct flash_bank_s *bank, int set, int first, int last)
-{
- int retval;
- if (bank->target->state != TARGET_HALTED)
- {
- ERROR("target not halted - aborting flash erase");
- retval=ERROR_TARGET_NOT_HALTED;
- } else if ((first < 0) || (last < first) || (last >= bank->num_sectors))
- {
- ERROR("invalid flash sector");
- retval=ERROR_FLASH_SECTOR_INVALID;
- } else
- {
- retval=bank->driver->protect(bank, set, first, last);
- }
- if (retval!=ERROR_OK)
- {
- ERROR("Failed protecting banks %d to %d", first, last);
- }
- return retval;
-}
-
-
-int flash_register_commands(struct command_context_s *cmd_ctx)
-{
- flash_cmd = register_command(cmd_ctx, NULL, "flash", NULL, COMMAND_ANY, NULL);
-
- register_command(cmd_ctx, flash_cmd, "bank", handle_flash_bank_command, COMMAND_CONFIG, "flash_bank <driver> <base> <size> <chip_width> <bus_width> <target> [driver_options ...]");
- register_command(cmd_ctx, flash_cmd, "auto_erase", handle_flash_auto_erase_command, COMMAND_ANY,
- "auto erase flash sectors <on|off>");
- return ERROR_OK;
-}
-
-int flash_init_drivers(struct command_context_s *cmd_ctx)
-{
- if (flash_banks)
- {
- register_command(cmd_ctx, flash_cmd, "banks", handle_flash_banks_command, COMMAND_EXEC,
- "list configured flash banks ");
- register_command(cmd_ctx, flash_cmd, "info", handle_flash_info_command, COMMAND_EXEC,
- "print info about flash bank <num>");
- register_command(cmd_ctx, flash_cmd, "probe", handle_flash_probe_command, COMMAND_EXEC,
- "identify flash bank <num>");
- register_command(cmd_ctx, flash_cmd, "erase_check", handle_flash_erase_check_command, COMMAND_EXEC,
- "check erase state of sectors in flash bank <num>");
- register_command(cmd_ctx, flash_cmd, "protect_check", handle_flash_protect_check_command, COMMAND_EXEC,
- "check protection state of sectors in flash bank <num>");
- register_command(cmd_ctx, flash_cmd, "erase_sector", handle_flash_erase_command, COMMAND_EXEC,
- "erase sectors at <bank> <first> <last>");
- register_command(cmd_ctx, flash_cmd, "erase_address", handle_flash_erase_address_command, COMMAND_EXEC,
- "erase address range <address> <length>");
- register_command(cmd_ctx, flash_cmd, "write_bank", handle_flash_write_bank_command, COMMAND_EXEC,
- "write binary data to <bank> <file> <offset>");
- register_command(cmd_ctx, flash_cmd, "write_image", handle_flash_write_image_command, COMMAND_EXEC,
- "write_image <file> [offset] [type]");
- register_command(cmd_ctx, flash_cmd, "protect", handle_flash_protect_command, COMMAND_EXEC,
- "set protection of sectors at <bank> <first> <last> <on|off>");
- }
-
- return ERROR_OK;
-}
-
-flash_bank_t *get_flash_bank_by_num_noprobe(int num)
-{
- flash_bank_t *p;
- int i = 0;
-
- for (p = flash_banks; p; p = p->next)
- {
- if (i++ == num)
- {
- return p;
- }
- }
- ERROR("Flash bank %d does not exist", num);
- return NULL;
-}
-
-flash_bank_t *get_flash_bank_by_num(int num)
-{
- flash_bank_t *p = get_flash_bank_by_num_noprobe(num);
- int retval;
-
- if (p == NULL)
- return NULL;
-
- retval = p->driver->auto_probe(p);
-
- if (retval != ERROR_OK)
- {
- ERROR("auto_probe failed %d\n", retval);
- return NULL;
- }
- return p;
-}
-
-int handle_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- int i;
- int found = 0;
- target_t *target;
-
- if (argc < 6)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- if ((target = get_target_by_num(strtoul(args[5], NULL, 0))) == NULL)
- {
- ERROR("target %lu not defined", strtoul(args[5], NULL, 0));
- return ERROR_OK;
- }
-
- for (i = 0; flash_drivers[i]; i++)
- {
- if (strcmp(args[0], flash_drivers[i]->name) == 0)
- {
- flash_bank_t *p, *c;
-
- /* register flash specific commands */
- if (flash_drivers[i]->register_commands(cmd_ctx) != ERROR_OK)
- {
- ERROR("couldn't register '%s' commands", args[0]);
- exit(-1);
- }
-
- c = malloc(sizeof(flash_bank_t));
- c->target = target;
- c->driver = flash_drivers[i];
- c->driver_priv = NULL;
- c->base = strtoul(args[1], NULL, 0);
- c->size = strtoul(args[2], NULL, 0);
- c->chip_width = strtoul(args[3], NULL, 0);
- c->bus_width = strtoul(args[4], NULL, 0);
- c->num_sectors = 0;
- c->sectors = NULL;
- c->next = NULL;
-
- if (flash_drivers[i]->flash_bank_command(cmd_ctx, cmd, args, argc, c) != ERROR_OK)
- {
- ERROR("'%s' driver rejected flash bank at 0x%8.8x", args[0], c->base);
- free(c);
- return ERROR_OK;
- }
-
- /* put flash bank in linked list */
- if (flash_banks)
- {
- /* find last flash bank */
- for (p = flash_banks; p && p->next; p = p->next);
- if (p)
- p->next = c;
- }
- else
- {
- flash_banks = c;
- }
-
- found = 1;
- }
- }
-
- /* no matching flash driver found */
- if (!found)
- {
- ERROR("flash driver '%s' not found", args[0]);
- exit(-1);
- }
-
- return ERROR_OK;
-}
-
-int handle_flash_banks_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *p;
- int i = 0;
-
- if (!flash_banks)
- {
- command_print(cmd_ctx, "no flash banks configured");
- return ERROR_OK;
- }
-
- for (p = flash_banks; p; p = p->next)
- {
- command_print(cmd_ctx, "#%i: %s at 0x%8.8x, size 0x%8.8x, buswidth %i, chipwidth %i",
- i++, p->driver->name, p->base, p->size, p->bus_width, p->chip_width);
- }
-
- return ERROR_OK;
-}
-
-int handle_flash_info_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *p;
- int i = 0;
- int j = 0;
-
- if (argc != 1)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- for (p = flash_banks; p; p = p->next, i++)
- {
- if (i == strtoul(args[0], NULL, 0))
- {
- char buf[1024];
-
- /* attempt auto probe */
- p->driver->auto_probe(p);
-
- command_print(cmd_ctx, "#%i: %s at 0x%8.8x, size 0x%8.8x, buswidth %i, chipwidth %i",
- i, p->driver->name, p->base, p->size, p->bus_width, p->chip_width);
- for (j = 0; j < p->num_sectors; j++)
- {
- char *erase_state, *protect_state;
-
- if (p->sectors[j].is_erased == 0)
- erase_state = "not erased";
- else if (p->sectors[j].is_erased == 1)
- erase_state = "erased";
- else
- erase_state = "erase state unknown";
-
- if (p->sectors[j].is_protected == 0)
- protect_state = "not protected";
- else if (p->sectors[j].is_protected == 1)
- protect_state = "protected";
- else
- protect_state = "protection state unknown";
-
- command_print(cmd_ctx, "\t#%i: 0x%8.8x (0x%x %ikB) %s, %s",
- j, p->sectors[j].offset, p->sectors[j].size, p->sectors[j].size>>10,
- erase_state, protect_state);
- }
-
- p->driver->info(p, buf, 1024);
- command_print(cmd_ctx, "%s", buf);
- }
- }
-
- return ERROR_OK;
-}
-
-int handle_flash_probe_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *p;
- int retval;
-
- if (argc != 1)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- p = get_flash_bank_by_num_noprobe(strtoul(args[0], NULL, 0));
- if (p)
- {
- if ((retval = p->driver->probe(p)) == ERROR_OK)
- {
- command_print(cmd_ctx, "flash '%s' found at 0x%8.8x", p->driver->name, p->base);
- }
- else if (retval == ERROR_FLASH_BANK_INVALID)
- {
- command_print(cmd_ctx, "probing failed for flash bank '#%s' at 0x%8.8x",
- args[0], p->base);
- }
- else
- {
- command_print(cmd_ctx, "unknown error when probing flash bank '#%s' at 0x%8.8x",
- args[0], p->base);
- }
- }
- else
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- }
-
- return ERROR_OK;
-}
-
-int handle_flash_erase_check_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *p;
- int retval;
-
- if (argc != 1)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- p = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (p)
- {
- if ((retval = p->driver->erase_check(p)) == ERROR_OK)
- {
- command_print(cmd_ctx, "successfully checked erase state", p->driver->name, p->base);
- }
- else
- {
- command_print(cmd_ctx, "unknown error when checking erase state of flash bank #%s at 0x%8.8x",
- args[0], p->base);
- }
- }
-
- return ERROR_OK;
-}
-
-int handle_flash_erase_address_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *p;
- int retval;
- int address;
- int length;
- duration_t duration;
- char *duration_text;
-
- target_t *target = get_current_target(cmd_ctx);
-
- if (argc != 2)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- address = strtoul(args[0], NULL, 0);
- length = strtoul(args[1], NULL, 0);
- if (length <= 0)
- {
- command_print(cmd_ctx, "Length must be >0");
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- p = get_flash_bank_by_addr(target, address);
- if (p == NULL)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- /* We can't know if we did a resume + halt, in which case we no longer know the erased state */
- flash_set_dirty();
-
- duration_start_measure(&duration);
-
- if ((retval = flash_erase_address_range(target, address, length)) == ERROR_OK)
- {
- duration_stop_measure(&duration, &duration_text);
- command_print(cmd_ctx, "erased address 0x%8.8x length %i in %s", address, length, duration_text);
- free(duration_text);
- }
-
- return retval;
-}
-
-int handle_flash_protect_check_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *p;
- int retval;
-
- if (argc != 1)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- p = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (p)
- {
- if ((retval = p->driver->protect_check(p)) == ERROR_OK)
- {
- command_print(cmd_ctx, "successfully checked protect state");
- }
- else if (retval == ERROR_FLASH_OPERATION_FAILED)
- {
- command_print(cmd_ctx, "checking protection state failed (possibly unsupported) by flash #%s at 0x%8.8x", args[0], p->base);
- }
- else
- {
- command_print(cmd_ctx, "unknown error when checking protection state of flash bank '#%s' at 0x%8.8x", args[0], p->base);
- }
- }
- else
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- return ERROR_OK;
-}
-
-int handle_flash_erase_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- if (argc > 2)
- {
- int first = strtoul(args[1], NULL, 0);
- int last = strtoul(args[2], NULL, 0);
- int retval;
- flash_bank_t *p = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- duration_t duration;
- char *duration_text;
-
- duration_start_measure(&duration);
-
- if (!p)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- if ((retval = flash_driver_erase(p, first, last)) == ERROR_OK)
- {
- duration_stop_measure(&duration, &duration_text);
-
- command_print(cmd_ctx, "erased sectors %i through %i on flash bank %i in %s", first, last, strtoul(args[0], 0, 0), duration_text);
- free(duration_text);
- }
- }
- else
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- return ERROR_OK;
-}
-
-int handle_flash_protect_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- if (argc > 3)
- {
- int first = strtoul(args[1], NULL, 0);
- int last = strtoul(args[2], NULL, 0);
- int set;
- int retval;
- flash_bank_t *p = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!p)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- if (strcmp(args[3], "on") == 0)
- set = 1;
- else if (strcmp(args[3], "off") == 0)
- set = 0;
- else
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- retval = flash_driver_protect(p, set, first, last);
- if (retval == ERROR_OK)
- {
- command_print(cmd_ctx, "%s protection for sectors %i through %i on flash bank %i", (set) ? "set" : "cleared", first, last, strtoul(args[0], 0, 0));
- }
- }
- else
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- }
-
- return ERROR_OK;
-}
-
-int handle_flash_write_image_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- target_t *target = get_current_target(cmd_ctx);
-
- image_t image;
- u32 written;
-
- duration_t duration;
- char *duration_text;
-
- int retval;
-
- if (argc < 1)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- }
-
- if (!target)
- {
- ERROR("no target selected");
- return ERROR_OK;
- }
-
- duration_start_measure(&duration);
-
- if (argc >= 2)
- {
- image.base_address_set = 1;
- image.base_address = strtoul(args[1], NULL, 0);
- }
- else
- {
- image.base_address_set = 0;
- image.base_address = 0x0;
- }
-
- image.start_address_set = 0;
-
- retval = image_open(&image, args[0], (argc == 3) ? args[2] : NULL);
- if (retval != ERROR_OK)
- {
- command_print(cmd_ctx, "image_open error: %s", image.error_str);
- return retval;
- }
-
- retval = flash_write(target, &image, &written, auto_erase);
-
- if (retval != ERROR_OK)
- {
- image_close(&image);
- return retval;
- }
-
- duration_stop_measure(&duration, &duration_text);
- if (retval == ERROR_OK)
- {
- command_print(cmd_ctx, "wrote %u byte from file %s in %s (%f kb/s)",
- written, args[0], duration_text,
- (float)written / 1024.0 / ((float)duration.duration.tv_sec + ((float)duration.duration.tv_usec / 1000000.0)));
- }
- free(duration_text);
-
- image_close(&image);
-
- return retval;
-}
-
-int handle_flash_write_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- u32 offset;
- u8 *buffer;
- u32 buf_cnt;
-
- fileio_t fileio;
-
- duration_t duration;
- char *duration_text;
-
- int retval;
- flash_bank_t *p;
-
- if (argc != 3)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- duration_start_measure(&duration);
-
- offset = strtoul(args[2], NULL, 0);
- p = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!p)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- if (fileio_open(&fileio, args[1], FILEIO_READ, FILEIO_BINARY) != ERROR_OK)
- {
- command_print(cmd_ctx, "flash write_binary error: %s", fileio.error_str);
- return ERROR_OK;
- }
-
- buffer = malloc(fileio.size);
- if (fileio_read(&fileio, fileio.size, buffer, &buf_cnt) != ERROR_OK)
- {
- command_print(cmd_ctx, "flash write_binary error: %s", fileio.error_str);
- return ERROR_OK;
- }
-
- retval = flash_driver_write(p, buffer, offset, buf_cnt);
-
- free(buffer);
-
- duration_stop_measure(&duration, &duration_text);
- if (retval!=ERROR_OK)
- {
- command_print(cmd_ctx, "wrote %"PRIi64" byte from file %s to flash bank %i at offset 0x%8.8x in %s (%f kb/s)",
- fileio.size, args[1], strtoul(args[0], NULL, 0), offset, duration_text,
- (float)fileio.size / 1024.0 / ((float)duration.duration.tv_sec + ((float)duration.duration.tv_usec / 1000000.0)));
- }
- free(duration_text);
-
- fileio_close(&fileio);
-
- return retval;
-}
-
-void flash_set_dirty(void)
-{
- flash_bank_t *c;
- int i;
-
- /* set all flash to require erasing */
- for (c = flash_banks; c; c = c->next)
- {
- for (i = 0; i < c->num_sectors; i++)
- {
- c->sectors[i].is_erased = 0;
- }
- }
-}
-
-/* lookup flash bank by address */
-flash_bank_t *get_flash_bank_by_addr(target_t *target, u32 addr)
-{
- flash_bank_t *c;
-
- /* cycle through bank list */
- for (c = flash_banks; c; c = c->next)
- {
- int retval;
- retval = c->driver->auto_probe(c);
-
- if (retval != ERROR_OK)
- {
- ERROR("auto_probe failed %d\n", retval);
- return NULL;
- }
- /* check whether address belongs to this flash bank */
- if ((addr >= c->base) && (addr < c->base + c->size) && target == c->target)
- return c;
- }
- ERROR("No flash at address 0x%08x\n", addr);
- return NULL;
-}
-
-/* erase given flash region, selects proper bank according to target and address */
-int flash_erase_address_range(target_t *target, u32 addr, u32 length)
-{
- flash_bank_t *c;
- int first = -1;
- int last = -1;
- int i;
-
- if ((c = get_flash_bank_by_addr(target, addr)) == NULL)
- return ERROR_FLASH_DST_OUT_OF_BANK; /* no corresponding bank found */
-
- if (c->size == 0 || c->num_sectors == 0)
- return ERROR_FLASH_BANK_INVALID;
-
- if (length == 0)
- {
- /* special case, erase whole bank when length is zero */
- if (addr != c->base)
- return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
-
- return flash_driver_erase(c, 0, c->num_sectors - 1);
- }
-
- /* check whether it fits */
- if (addr + length > c->base + c->size)
- return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
-
- addr -= c->base;
-
- for (i = 0; i < c->num_sectors; i++)
- {
- /* check whether sector overlaps with the given range and is not yet erased */
- if (addr < c->sectors[i].offset + c->sectors[i].size && addr + length > c->sectors[i].offset && c->sectors[i].is_erased != 1) {
- /* if first is not set yet then this is the first sector */
- if (first == -1)
- first = i;
- last = i; /* and it is the last one so far in any case */
- }
- }
-
- if( first == -1 || last == -1 )
- return ERROR_OK;
-
- return flash_driver_erase(c, first, last);
-}
-
-/* write (optional verify) an image to flash memory of the given target */
-int flash_write(target_t *target, image_t *image, u32 *written, int erase)
-{
- int retval;
-
- int section;
- u32 section_offset;
- flash_bank_t *c;
-
- section = 0;
- section_offset = 0;
-
- if (written)
- *written = 0;
-
- if (erase)
- {
- /* assume all sectors need erasing - stops any problems
- * when flash_write is called multiple times */
-
- flash_set_dirty();
- }
-
- /* loop until we reach end of the image */
- while (section < image->num_sections)
- {
- u32 buffer_size;
- u8 *buffer;
- int section_first;
- int section_last;
- u32 run_address = image->sections[section].base_address + section_offset;
- u32 run_size = image->sections[section].size - section_offset;
-
- if (image->sections[section].size == 0)
- {
- WARNING("empty section %d", section);
- section++;
- section_offset = 0;
- continue;
- }
-
- /* find the corresponding flash bank */
- if ((c = get_flash_bank_by_addr(target, run_address)) == NULL)
- {
- section++; /* and skip it */
- section_offset = 0;
- continue;
- }
-
- /* collect consecutive sections which fall into the same bank */
- section_first = section;
- section_last = section;
- while ((run_address + run_size < c->base + c->size)
- && (section_last + 1 < image->num_sections))
- {
- if (image->sections[section_last + 1].base_address < (run_address + run_size))
- {
- DEBUG("section %d out of order(very slightly surprising, but supported)", section_last + 1);
- break;
- }
- if (image->sections[section_last + 1].base_address != (run_address + run_size))
- break;
- run_size += image->sections[++section_last].size;
- }
-
- /* fit the run into bank constraints */
- if (run_address + run_size > c->base + c->size)
- run_size = c->base + c->size - run_address;
-
- /* allocate buffer */
- buffer = malloc(run_size);
- buffer_size = 0;
-
- /* read sections to the buffer */
- while (buffer_size < run_size)
- {
- u32 size_read;
-
- if (buffer_size - run_size <= image->sections[section].size - section_offset)
- size_read = buffer_size - run_size;
- else
- size_read = image->sections[section].size - section_offset;
-
- if ((retval = image_read_section(image, section, section_offset,
- size_read, buffer + buffer_size, &size_read)) != ERROR_OK || size_read == 0)
- {
- free(buffer);
-
- return retval;
- }
-
- buffer_size += size_read;
- section_offset += size_read;
-
- if (section_offset >= image->sections[section].size)
- {
- section++;
- section_offset = 0;
- }
- }
-
- retval = ERROR_OK;
-
- if (erase)
- {
- /* calculate and erase sectors */
- retval = flash_erase_address_range( target, run_address, run_size );
- }
-
- if (retval == ERROR_OK)
- {
- /* write flash sectors */
- retval = flash_driver_write(c, buffer, run_address - c->base, run_size);
- }
-
- free(buffer);
-
- if (retval != ERROR_OK)
- {
- return retval; /* abort operation */
- }
-
- if (written != NULL)
- *written += run_size; /* add run size to total written counter */
- }
-
- return ERROR_OK;
-}
-
-int handle_flash_auto_erase_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- if (argc != 1)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- }
-
- if (strcmp(args[0], "on") == 0)
- auto_erase = 1;
- else if (strcmp(args[0], "off") == 0)
- auto_erase = 0;
- else
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- return ERROR_OK;
-}
+/***************************************************************************
+ * Copyright (C) 2005 by Dominic Rath *
+ * Dominic.Rath@gmx.de *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "flash.h"
+#include "command.h"
+#include "target.h"
+#include "time_support.h"
+#include "fileio.h"
+#include "image.h"
+#include "log.h"
+
+#include <string.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <errno.h>
+#include <inttypes.h>
+
+/* command handlers */
+int handle_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int handle_flash_banks_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int handle_flash_info_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int handle_flash_probe_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int handle_flash_erase_check_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int handle_flash_erase_address_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int handle_flash_protect_check_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int handle_flash_erase_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int handle_flash_write_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int handle_flash_write_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int handle_flash_write_image_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int handle_flash_protect_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int handle_flash_auto_erase_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+flash_bank_t *get_flash_bank_by_addr(target_t *target, u32 addr);
+
+/* flash drivers
+ */
+extern flash_driver_t lpc2000_flash;
+extern flash_driver_t cfi_flash;
+extern flash_driver_t at91sam7_flash;
+extern flash_driver_t str7x_flash;
+extern flash_driver_t str9x_flash;
+extern flash_driver_t stellaris_flash;
+extern flash_driver_t str9xpec_flash;
+extern flash_driver_t stm32x_flash;
+extern flash_driver_t tms470_flash;
+
+flash_driver_t *flash_drivers[] =
+{
+ &lpc2000_flash,
+ &cfi_flash,
+ &at91sam7_flash,
+ &str7x_flash,
+ &str9x_flash,
+ &stellaris_flash,
+ &str9xpec_flash,
+ &stm32x_flash,
+ &tms470_flash,
+ NULL,
+};
+
+flash_bank_t *flash_banks;
+static command_t *flash_cmd;
+static int auto_erase = 0;
+
+/* wafer thin wrapper for invoking the flash driver */
+static int flash_driver_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
+{
+ int retval=ERROR_OK;
+ if (bank->target->state != TARGET_HALTED)
+ {
+ ERROR("target not halted - aborting flash write");
+ retval=ERROR_TARGET_NOT_HALTED;
+ } else
+ {
+ retval=bank->driver->write(bank, buffer, offset, count);
+ }
+ if (retval!=ERROR_OK)
+ {
+ ERROR("Writing to flash bank at address 0x%08x at offset 0x%8.8x", bank->base, offset);
+ }
+ return retval;
+}
+
+static int flash_driver_erase(struct flash_bank_s *bank, int first, int last)
+{
+ int retval=ERROR_OK;
+ if (bank->target->state != TARGET_HALTED)
+ {
+ ERROR("target not halted - aborting flash erase");
+ retval=ERROR_TARGET_NOT_HALTED;
+ } else if ((first < 0) || (last < first) || (last >= bank->num_sectors))
+ {
+ ERROR("invalid flash sector");
+ retval=ERROR_FLASH_SECTOR_INVALID;
+ } else
+ {
+ retval=bank->driver->erase(bank, first, last);
+ }
+ if (retval!=ERROR_OK)
+ {
+ ERROR("Failed erasing banks %d to %d", first, last);
+ }
+ return retval;
+}
+
+int flash_driver_protect(struct flash_bank_s *bank, int set, int first, int last)
+{
+ int retval;
+ if (bank->target->state != TARGET_HALTED)
+ {
+ ERROR("target not halted - aborting flash erase");
+ retval=ERROR_TARGET_NOT_HALTED;
+ } else if ((first < 0) || (last < first) || (last >= bank->num_sectors))
+ {
+ ERROR("invalid flash sector");
+ retval=ERROR_FLASH_SECTOR_INVALID;
+ } else
+ {
+ retval=bank->driver->protect(bank, set, first, last);
+ }
+ if (retval!=ERROR_OK)
+ {
+ ERROR("Failed protecting banks %d to %d", first, last);
+ }
+ return retval;
+}
+
+
+int flash_register_commands(struct command_context_s *cmd_ctx)
+{
+ flash_cmd = register_command(cmd_ctx, NULL, "flash", NULL, COMMAND_ANY, NULL);
+
+ register_command(cmd_ctx, flash_cmd, "bank", handle_flash_bank_command, COMMAND_CONFIG, "flash_bank <driver> <base> <size> <chip_width> <bus_width> <target> [driver_options ...]");
+ register_command(cmd_ctx, flash_cmd, "auto_erase", handle_flash_auto_erase_command, COMMAND_ANY,
+ "auto erase flash sectors <on|off>");
+ return ERROR_OK;
+}
+
+int flash_init_drivers(struct command_context_s *cmd_ctx)
+{
+ if (flash_banks)
+ {
+ register_command(cmd_ctx, flash_cmd, "banks", handle_flash_banks_command, COMMAND_EXEC,
+ "list configured flash banks ");
+ register_command(cmd_ctx, flash_cmd, "info", handle_flash_info_command, COMMAND_EXEC,
+ "print info about flash bank <num>");
+ register_command(cmd_ctx, flash_cmd, "probe", handle_flash_probe_command, COMMAND_EXEC,
+ "identify flash bank <num>");
+ register_command(cmd_ctx, flash_cmd, "erase_check", handle_flash_erase_check_command, COMMAND_EXEC,
+ "check erase state of sectors in flash bank <num>");
+ register_command(cmd_ctx, flash_cmd, "protect_check", handle_flash_protect_check_command, COMMAND_EXEC,
+ "check protection state of sectors in flash bank <num>");
+ register_command(cmd_ctx, flash_cmd, "erase_sector", handle_flash_erase_command, COMMAND_EXEC,
+ "erase sectors at <bank> <first> <last>");
+ register_command(cmd_ctx, flash_cmd, "erase_address", handle_flash_erase_address_command, COMMAND_EXEC,
+ "erase address range <address> <length>");
+ register_command(cmd_ctx, flash_cmd, "write_bank", handle_flash_write_bank_command, COMMAND_EXEC,
+ "write binary data to <bank> <file> <offset>");
+ register_command(cmd_ctx, flash_cmd, "write_image", handle_flash_write_image_command, COMMAND_EXEC,
+ "write_image <file> [offset] [type]");
+ register_command(cmd_ctx, flash_cmd, "protect", handle_flash_protect_command, COMMAND_EXEC,
+ "set protection of sectors at <bank> <first> <last> <on|off>");
+ }
+
+ return ERROR_OK;
+}
+
+flash_bank_t *get_flash_bank_by_num_noprobe(int num)
+{
+ flash_bank_t *p;
+ int i = 0;
+
+ for (p = flash_banks; p; p = p->next)
+ {
+ if (i++ == num)
+ {
+ return p;
+ }
+ }
+ ERROR("Flash bank %d does not exist", num);
+ return NULL;
+}
+
+flash_bank_t *get_flash_bank_by_num(int num)
+{
+ flash_bank_t *p = get_flash_bank_by_num_noprobe(num);
+ int retval;
+
+ if (p == NULL)
+ return NULL;
+
+ retval = p->driver->auto_probe(p);
+
+ if (retval != ERROR_OK)
+ {
+ ERROR("auto_probe failed %d\n", retval);
+ return NULL;
+ }
+ return p;
+}
+
+int handle_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ int i;
+ int found = 0;
+ target_t *target;
+
+ if (argc < 6)
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ if ((target = get_target_by_num(strtoul(args[5], NULL, 0))) == NULL)
+ {
+ ERROR("target %lu not defined", strtoul(args[5], NULL, 0));
+ return ERROR_OK;
+ }
+
+ for (i = 0; flash_drivers[i]; i++)
+ {
+ if (strcmp(args[0], flash_drivers[i]->name) == 0)
+ {
+ flash_bank_t *p, *c;
+
+ /* register flash specific commands */
+ if (flash_drivers[i]->register_commands(cmd_ctx) != ERROR_OK)
+ {
+ ERROR("couldn't register '%s' commands", args[0]);
+ exit(-1);
+ }
+
+ c = malloc(sizeof(flash_bank_t));
+ c->target = target;
+ c->driver = flash_drivers[i];
+ c->driver_priv = NULL;
+ c->base = strtoul(args[1], NULL, 0);
+ c->size = strtoul(args[2], NULL, 0);
+ c->chip_width = strtoul(args[3], NULL, 0);
+ c->bus_width = strtoul(args[4], NULL, 0);
+ c->num_sectors = 0;
+ c->sectors = NULL;
+ c->next = NULL;
+
+ if (flash_drivers[i]->flash_bank_command(cmd_ctx, cmd, args, argc, c) != ERROR_OK)
+ {
+ ERROR("'%s' driver rejected flash bank at 0x%8.8x", args[0], c->base);
+ free(c);
+ return ERROR_OK;
+ }
+
+ /* put flash bank in linked list */
+ if (flash_banks)
+ {
+ /* find last flash bank */
+ for (p = flash_banks; p && p->next; p = p->next);
+ if (p)
+ p->next = c;
+ }
+ else
+ {
+ flash_banks = c;
+ }
+
+ found = 1;
+ }
+ }
+
+ /* no matching flash driver found */
+ if (!found)
+ {
+ ERROR("flash driver '%s' not found", args[0]);
+ exit(-1);
+ }
+
+ return ERROR_OK;
+}
+
+int handle_flash_banks_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *p;
+ int i = 0;
+
+ if (!flash_banks)
+ {
+ command_print(cmd_ctx, "no flash banks configured");
+ return ERROR_OK;
+ }
+
+ for (p = flash_banks; p; p = p->next)
+ {
+ command_print(cmd_ctx, "#%i: %s at 0x%8.8x, size 0x%8.8x, buswidth %i, chipwidth %i",
+ i++, p->driver->name, p->base, p->size, p->bus_width, p->chip_width);
+ }
+
+ return ERROR_OK;
+}
+
+int handle_flash_info_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *p;
+ int i = 0;
+ int j = 0;
+
+ if (argc != 1)
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ for (p = flash_banks; p; p = p->next, i++)
+ {
+ if (i == strtoul(args[0], NULL, 0))
+ {
+ char buf[1024];
+
+ /* attempt auto probe */
+ p->driver->auto_probe(p);
+
+ command_print(cmd_ctx, "#%i: %s at 0x%8.8x, size 0x%8.8x, buswidth %i, chipwidth %i",
+ i, p->driver->name, p->base, p->size, p->bus_width, p->chip_width);
+ for (j = 0; j < p->num_sectors; j++)
+ {
+ char *erase_state, *protect_state;
+
+ if (p->sectors[j].is_erased == 0)
+ erase_state = "not erased";
+ else if (p->sectors[j].is_erased == 1)
+ erase_state = "erased";
+ else
+ erase_state = "erase state unknown";
+
+ if (p->sectors[j].is_protected == 0)
+ protect_state = "not protected";
+ else if (p->sectors[j].is_protected == 1)
+ protect_state = "protected";
+ else
+ protect_state = "protection state unknown";
+
+ command_print(cmd_ctx, "\t#%i: 0x%8.8x (0x%x %ikB) %s, %s",
+ j, p->sectors[j].offset, p->sectors[j].size, p->sectors[j].size>>10,
+ erase_state, protect_state);
+ }
+
+ p->driver->info(p, buf, 1024);
+ command_print(cmd_ctx, "%s", buf);
+ }
+ }
+
+ return ERROR_OK;
+}
+
+int handle_flash_probe_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *p;
+ int retval;
+
+ if (argc != 1)
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ p = get_flash_bank_by_num_noprobe(strtoul(args[0], NULL, 0));
+ if (p)
+ {
+ if ((retval = p->driver->probe(p)) == ERROR_OK)
+ {
+ command_print(cmd_ctx, "flash '%s' found at 0x%8.8x", p->driver->name, p->base);
+ }
+ else if (retval == ERROR_FLASH_BANK_INVALID)
+ {
+ command_print(cmd_ctx, "probing failed for flash bank '#%s' at 0x%8.8x",
+ args[0], p->base);
+ }
+ else
+ {
+ command_print(cmd_ctx, "unknown error when probing flash bank '#%s' at 0x%8.8x",
+ args[0], p->base);
+ }
+ }
+ else
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ }
+
+ return ERROR_OK;
+}
+
+int handle_flash_erase_check_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *p;
+ int retval;
+
+ if (argc != 1)
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ p = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (p)
+ {
+ if ((retval = p->driver->erase_check(p)) == ERROR_OK)
+ {
+ command_print(cmd_ctx, "successfully checked erase state", p->driver->name, p->base);
+ }
+ else
+ {
+ command_print(cmd_ctx, "unknown error when checking erase state of flash bank #%s at 0x%8.8x",
+ args[0], p->base);
+ }
+ }
+
+ return ERROR_OK;
+}
+
+int handle_flash_erase_address_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *p;
+ int retval;
+ int address;
+ int length;
+ duration_t duration;
+ char *duration_text;
+
+ target_t *target = get_current_target(cmd_ctx);
+
+ if (argc != 2)
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ address = strtoul(args[0], NULL, 0);
+ length = strtoul(args[1], NULL, 0);
+ if (length <= 0)
+ {
+ command_print(cmd_ctx, "Length must be >0");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ p = get_flash_bank_by_addr(target, address);
+ if (p == NULL)
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ /* We can't know if we did a resume + halt, in which case we no longer know the erased state */
+ flash_set_dirty();
+
+ duration_start_measure(&duration);
+
+ if ((retval = flash_erase_address_range(target, address, length)) == ERROR_OK)
+ {
+ duration_stop_measure(&duration, &duration_text);
+ command_print(cmd_ctx, "erased address 0x%8.8x length %i in %s", address, length, duration_text);
+ free(duration_text);
+ }
+
+ return retval;
+}
+
+int handle_flash_protect_check_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *p;
+ int retval;
+
+ if (argc != 1)
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ p = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (p)
+ {
+ if ((retval = p->driver->protect_check(p)) == ERROR_OK)
+ {
+ command_print(cmd_ctx, "successfully checked protect state");
+ }
+ else if (retval == ERROR_FLASH_OPERATION_FAILED)
+ {
+ command_print(cmd_ctx, "checking protection state failed (possibly unsupported) by flash #%s at 0x%8.8x", args[0], p->base);
+ }
+ else
+ {
+ command_print(cmd_ctx, "unknown error when checking protection state of flash bank '#%s' at 0x%8.8x", args[0], p->base);
+ }
+ }
+ else
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ return ERROR_OK;
+}
+
+int handle_flash_erase_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ if (argc > 2)
+ {
+ int first = strtoul(args[1], NULL, 0);
+ int last = strtoul(args[2], NULL, 0);
+ int retval;
+ flash_bank_t *p = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ duration_t duration;
+ char *duration_text;
+
+ duration_start_measure(&duration);
+
+ if (!p)
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ if ((retval = flash_driver_erase(p, first, last)) == ERROR_OK)
+ {
+ duration_stop_measure(&duration, &duration_text);
+
+ command_print(cmd_ctx, "erased sectors %i through %i on flash bank %i in %s", first, last, strtoul(args[0], 0, 0), duration_text);
+ free(duration_text);
+ }
+ }
+ else
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ return ERROR_OK;
+}
+
+int handle_flash_protect_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ if (argc > 3)
+ {
+ int first = strtoul(args[1], NULL, 0);
+ int last = strtoul(args[2], NULL, 0);
+ int set;
+ int retval;
+ flash_bank_t *p = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!p)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ if (strcmp(args[3], "on") == 0)
+ set = 1;
+ else if (strcmp(args[3], "off") == 0)
+ set = 0;
+ else
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ retval = flash_driver_protect(p, set, first, last);
+ if (retval == ERROR_OK)
+ {
+ command_print(cmd_ctx, "%s protection for sectors %i through %i on flash bank %i", (set) ? "set" : "cleared", first, last, strtoul(args[0], 0, 0));
+ }
+ }
+ else
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ }
+
+ return ERROR_OK;
+}
+
+int handle_flash_write_image_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ target_t *target = get_current_target(cmd_ctx);
+
+ image_t image;
+ u32 written;
+
+ duration_t duration;
+ char *duration_text;
+
+ int retval;
+
+ if (argc < 1)
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ }
+
+ if (!target)
+ {
+ ERROR("no target selected");
+ return ERROR_OK;
+ }
+
+ duration_start_measure(&duration);
+
+ if (argc >= 2)
+ {
+ image.base_address_set = 1;
+ image.base_address = strtoul(args[1], NULL, 0);
+ }
+ else
+ {
+ image.base_address_set = 0;
+ image.base_address = 0x0;
+ }
+
+ image.start_address_set = 0;
+
+ retval = image_open(&image, args[0], (argc == 3) ? args[2] : NULL);
+ if (retval != ERROR_OK)
+ {
+ command_print(cmd_ctx, "image_open error: %s", image.error_str);
+ return retval;
+ }
+
+ retval = flash_write(target, &image, &written, auto_erase);
+
+ if (retval != ERROR_OK)
+ {
+ image_close(&image);
+ return retval;
+ }
+
+ duration_stop_measure(&duration, &duration_text);
+ if (retval == ERROR_OK)
+ {
+ command_print(cmd_ctx, "wrote %u byte from file %s in %s (%f kb/s)",
+ written, args[0], duration_text,
+ (float)written / 1024.0 / ((float)duration.duration.tv_sec + ((float)duration.duration.tv_usec / 1000000.0)));
+ }
+ free(duration_text);
+
+ image_close(&image);
+
+ return retval;
+}
+
+int handle_flash_write_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ u32 offset;
+ u8 *buffer;
+ u32 buf_cnt;
+
+ fileio_t fileio;
+
+ duration_t duration;
+ char *duration_text;
+
+ int retval;
+ flash_bank_t *p;
+
+ if (argc != 3)
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ duration_start_measure(&duration);
+
+ offset = strtoul(args[2], NULL, 0);
+ p = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!p)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ if (fileio_open(&fileio, args[1], FILEIO_READ, FILEIO_BINARY) != ERROR_OK)
+ {
+ command_print(cmd_ctx, "flash write_binary error: %s", fileio.error_str);
+ return ERROR_OK;
+ }
+
+ buffer = malloc(fileio.size);
+ if (fileio_read(&fileio, fileio.size, buffer, &buf_cnt) != ERROR_OK)
+ {
+ command_print(cmd_ctx, "flash write_binary error: %s", fileio.error_str);
+ return ERROR_OK;
+ }
+
+ retval = flash_driver_write(p, buffer, offset, buf_cnt);
+
+ free(buffer);
+
+ duration_stop_measure(&duration, &duration_text);
+ if (retval!=ERROR_OK)
+ {
+ command_print(cmd_ctx, "wrote %"PRIi64" byte from file %s to flash bank %i at offset 0x%8.8x in %s (%f kb/s)",
+ fileio.size, args[1], strtoul(args[0], NULL, 0), offset, duration_text,
+ (float)fileio.size / 1024.0 / ((float)duration.duration.tv_sec + ((float)duration.duration.tv_usec / 1000000.0)));
+ }
+ free(duration_text);
+
+ fileio_close(&fileio);
+
+ return retval;
+}
+
+void flash_set_dirty(void)
+{
+ flash_bank_t *c;
+ int i;
+
+ /* set all flash to require erasing */
+ for (c = flash_banks; c; c = c->next)
+ {
+ for (i = 0; i < c->num_sectors; i++)
+ {
+ c->sectors[i].is_erased = 0;
+ }
+ }
+}
+
+/* lookup flash bank by address */
+flash_bank_t *get_flash_bank_by_addr(target_t *target, u32 addr)
+{
+ flash_bank_t *c;
+
+ /* cycle through bank list */
+ for (c = flash_banks; c; c = c->next)
+ {
+ int retval;
+ retval = c->driver->auto_probe(c);
+
+ if (retval != ERROR_OK)
+ {
+ ERROR("auto_probe failed %d\n", retval);
+ return NULL;
+ }
+ /* check whether address belongs to this flash bank */
+ if ((addr >= c->base) && (addr < c->base + c->size) && target == c->target)
+ return c;
+ }
+ ERROR("No flash at address 0x%08x\n", addr);
+ return NULL;
+}
+
+/* erase given flash region, selects proper bank according to target and address */
+int flash_erase_address_range(target_t *target, u32 addr, u32 length)
+{
+ flash_bank_t *c;
+ int first = -1;
+ int last = -1;
+ int i;
+
+ if ((c = get_flash_bank_by_addr(target, addr)) == NULL)
+ return ERROR_FLASH_DST_OUT_OF_BANK; /* no corresponding bank found */
+
+ if (c->size == 0 || c->num_sectors == 0)
+ return ERROR_FLASH_BANK_INVALID;
+
+ if (length == 0)
+ {
+ /* special case, erase whole bank when length is zero */
+ if (addr != c->base)
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+
+ return flash_driver_erase(c, 0, c->num_sectors - 1);
+ }
+
+ /* check whether it fits */
+ if (addr + length > c->base + c->size)
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+
+ addr -= c->base;
+
+ for (i = 0; i < c->num_sectors; i++)
+ {
+ /* check whether sector overlaps with the given range and is not yet erased */
+ if (addr < c->sectors[i].offset + c->sectors[i].size && addr + length > c->sectors[i].offset && c->sectors[i].is_erased != 1) {
+ /* if first is not set yet then this is the first sector */
+ if (first == -1)
+ first = i;
+ last = i; /* and it is the last one so far in any case */
+ }
+ }
+
+ if( first == -1 || last == -1 )
+ return ERROR_OK;
+
+ return flash_driver_erase(c, first, last);
+}
+
+/* write (optional verify) an image to flash memory of the given target */
+int flash_write(target_t *target, image_t *image, u32 *written, int erase)
+{
+ int retval;
+
+ int section;
+ u32 section_offset;
+ flash_bank_t *c;
+
+ section = 0;
+ section_offset = 0;
+
+ if (written)
+ *written = 0;
+
+ if (erase)
+ {
+ /* assume all sectors need erasing - stops any problems
+ * when flash_write is called multiple times */
+
+ flash_set_dirty();
+ }
+
+ /* loop until we reach end of the image */
+ while (section < image->num_sections)
+ {
+ u32 buffer_size;
+ u8 *buffer;
+ int section_first;
+ int section_last;
+ u32 run_address = image->sections[section].base_address + section_offset;
+ u32 run_size = image->sections[section].size - section_offset;
+
+ if (image->sections[section].size == 0)
+ {
+ WARNING("empty section %d", section);
+ section++;
+ section_offset = 0;
+ continue;
+ }
+
+ /* find the corresponding flash bank */
+ if ((c = get_flash_bank_by_addr(target, run_address)) == NULL)
+ {
+ section++; /* and skip it */
+ section_offset = 0;
+ continue;
+ }
+
+ /* collect consecutive sections which fall into the same bank */
+ section_first = section;
+ section_last = section;
+ while ((run_address + run_size < c->base + c->size)
+ && (section_last + 1 < image->num_sections))
+ {
+ if (image->sections[section_last + 1].base_address < (run_address + run_size))
+ {
+ DEBUG("section %d out of order(very slightly surprising, but supported)", section_last + 1);
+ break;
+ }
+ if (image->sections[section_last + 1].base_address != (run_address + run_size))
+ break;
+ run_size += image->sections[++section_last].size;
+ }
+
+ /* fit the run into bank constraints */
+ if (run_address + run_size > c->base + c->size)
+ run_size = c->base + c->size - run_address;
+
+ /* allocate buffer */
+ buffer = malloc(run_size);
+ buffer_size = 0;
+
+ /* read sections to the buffer */
+ while (buffer_size < run_size)
+ {
+ u32 size_read;
+
+ if (buffer_size - run_size <= image->sections[section].size - section_offset)
+ size_read = buffer_size - run_size;
+ else
+ size_read = image->sections[section].size - section_offset;
+
+ if ((retval = image_read_section(image, section, section_offset,
+ size_read, buffer + buffer_size, &size_read)) != ERROR_OK || size_read == 0)
+ {
+ free(buffer);
+
+ return retval;
+ }
+
+ buffer_size += size_read;
+ section_offset += size_read;
+
+ if (section_offset >= image->sections[section].size)
+ {
+ section++;
+ section_offset = 0;
+ }
+ }
+
+ retval = ERROR_OK;
+
+ if (erase)
+ {
+ /* calculate and erase sectors */
+ retval = flash_erase_address_range( target, run_address, run_size );
+ }
+
+ if (retval == ERROR_OK)
+ {
+ /* write flash sectors */
+ retval = flash_driver_write(c, buffer, run_address - c->base, run_size);
+ }
+
+ free(buffer);
+
+ if (retval != ERROR_OK)
+ {
+ return retval; /* abort operation */
+ }
+
+ if (written != NULL)
+ *written += run_size; /* add run size to total written counter */
+ }
+
+ return ERROR_OK;
+}
+
+int handle_flash_auto_erase_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ if (argc != 1)
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ }
+
+ if (strcmp(args[0], "on") == 0)
+ auto_erase = 1;
+ else if (strcmp(args[0], "off") == 0)
+ auto_erase = 0;
+ else
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ return ERROR_OK;
+}
diff --git a/src/flash/flash.h b/src/flash/flash.h
index e8262efa..b707b511 100644
--- a/src/flash/flash.h
+++ b/src/flash/flash.h
@@ -1,97 +1,97 @@
-/***************************************************************************
- * Copyright (C) 2005 by Dominic Rath *
- * Dominic.Rath@gmx.de *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- ***************************************************************************/
-#ifndef FLASH_H
-#define FLASH_H
-
-#include "target.h"
-#include "image.h"
-
-#define FLASH_MAX_ERROR_STR (128)
-
-typedef struct flash_sector_s
-{
- u32 offset;
- u32 size;
- int is_erased;
- int is_protected;
-} flash_sector_t;
-
-struct flash_bank_s;
-
-typedef struct flash_driver_s
-{
- char *name;
- int (*register_commands)(struct command_context_s *cmd_ctx);
- int (*flash_bank_command)(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
- /* low level flash erase. Only invoke from flash_driver_erase()
- *
- * Will only be invoked when target is halted.
- */
- int (*erase)(struct flash_bank_s *bank, int first, int last);
- /* invoked only from flash_driver_protect().
- *
- * Only invoked if target is halted
- */
- int (*protect)(struct flash_bank_s *bank, int set, int first, int last);
- /* low level flash write. Will only be invoked if the target is halted.
- * use the flash_driver_write() wrapper to invoke.
- */
- int (*write)(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
- int (*probe)(struct flash_bank_s *bank);
- int (*erase_check)(struct flash_bank_s *bank);
- int (*protect_check)(struct flash_bank_s *bank);
- int (*info)(struct flash_bank_s *bank, char *buf, int buf_size);
- int (*auto_probe)(struct flash_bank_s *bank);
-} flash_driver_t;
-
-typedef struct flash_bank_s
-{
- target_t *target;
- flash_driver_t *driver;
- void *driver_priv;
- u32 base;
- u32 size;
- int chip_width;
- int bus_width;
- int num_sectors;
- flash_sector_t *sectors;
- struct flash_bank_s *next;
-} flash_bank_t;
-
-extern int flash_register_commands(struct command_context_s *cmd_ctx);
-extern int flash_init_drivers(struct command_context_s *cmd_ctx);
-
-extern int flash_erase_address_range(target_t *target, u32 addr, u32 length);
-extern int flash_write(target_t *target, image_t *image, u32 *written, int erase);
-extern void flash_set_dirty(void);
-
-extern flash_bank_t *get_flash_bank_by_num(int num);
-extern flash_bank_t *get_flash_bank_by_addr(target_t *target, u32 addr);
-
-#define ERROR_FLASH_BANK_INVALID (-900)
-#define ERROR_FLASH_SECTOR_INVALID (-901)
-#define ERROR_FLASH_OPERATION_FAILED (-902)
-#define ERROR_FLASH_DST_OUT_OF_BANK (-903)
-#define ERROR_FLASH_DST_BREAKS_ALIGNMENT (-904)
-#define ERROR_FLASH_BUSY (-905)
-#define ERROR_FLASH_SECTOR_NOT_ERASED (-906)
-#define ERROR_FLASH_BANK_NOT_PROBED (-907)
-
-#endif /* FLASH_H */
+/***************************************************************************
+ * Copyright (C) 2005 by Dominic Rath *
+ * Dominic.Rath@gmx.de *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+#ifndef FLASH_H
+#define FLASH_H
+
+#include "target.h"
+#include "image.h"
+
+#define FLASH_MAX_ERROR_STR (128)
+
+typedef struct flash_sector_s
+{
+ u32 offset;
+ u32 size;
+ int is_erased;
+ int is_protected;
+} flash_sector_t;
+
+struct flash_bank_s;
+
+typedef struct flash_driver_s
+{
+ char *name;
+ int (*register_commands)(struct command_context_s *cmd_ctx);
+ int (*flash_bank_command)(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
+ /* low level flash erase. Only invoke from flash_driver_erase()
+ *
+ * Will only be invoked when target is halted.
+ */
+ int (*erase)(struct flash_bank_s *bank, int first, int last);
+ /* invoked only from flash_driver_protect().
+ *
+ * Only invoked if target is halted
+ */
+ int (*protect)(struct flash_bank_s *bank, int set, int first, int last);
+ /* low level flash write. Will only be invoked if the target is halted.
+ * use the flash_driver_write() wrapper to invoke.
+ */
+ int (*write)(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
+ int (*probe)(struct flash_bank_s *bank);
+ int (*erase_check)(struct flash_bank_s *bank);
+ int (*protect_check)(struct flash_bank_s *bank);
+ int (*info)(struct flash_bank_s *bank, char *buf, int buf_size);
+ int (*auto_probe)(struct flash_bank_s *bank);
+} flash_driver_t;
+
+typedef struct flash_bank_s
+{
+ target_t *target;
+ flash_driver_t *driver;
+ void *driver_priv;
+ u32 base;
+ u32 size;
+ int chip_width;
+ int bus_width;
+ int num_sectors;
+ flash_sector_t *sectors;
+ struct flash_bank_s *next;
+} flash_bank_t;
+
+extern int flash_register_commands(struct command_context_s *cmd_ctx);
+extern int flash_init_drivers(struct command_context_s *cmd_ctx);
+
+extern int flash_erase_address_range(target_t *target, u32 addr, u32 length);
+extern int flash_write(target_t *target, image_t *image, u32 *written, int erase);
+extern void flash_set_dirty(void);
+
+extern flash_bank_t *get_flash_bank_by_num(int num);
+extern flash_bank_t *get_flash_bank_by_addr(target_t *target, u32 addr);
+
+#define ERROR_FLASH_BANK_INVALID (-900)
+#define ERROR_FLASH_SECTOR_INVALID (-901)
+#define ERROR_FLASH_OPERATION_FAILED (-902)
+#define ERROR_FLASH_DST_OUT_OF_BANK (-903)
+#define ERROR_FLASH_DST_BREAKS_ALIGNMENT (-904)
+#define ERROR_FLASH_BUSY (-905)
+#define ERROR_FLASH_SECTOR_NOT_ERASED (-906)
+#define ERROR_FLASH_BANK_NOT_PROBED (-907)
+
+#endif /* FLASH_H */
diff --git a/src/flash/lpc2000.c b/src/flash/lpc2000.c
index 009c0c05..396f910c 100644
--- a/src/flash/lpc2000.c
+++ b/src/flash/lpc2000.c
@@ -1,683 +1,683 @@
-/***************************************************************************
- * Copyright (C) 2005 by Dominic Rath *
- * Dominic.Rath@gmx.de *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- ***************************************************************************/
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "lpc2000.h"
-
-#include "flash.h"
-#include "target.h"
-#include "log.h"
-#include "armv4_5.h"
-#include "algorithm.h"
-#include "binarybuffer.h"
-
-#include <stdlib.h>
-#include <string.h>
-
-/* flash programming support for Philips LPC2xxx devices
- * currently supported devices:
- * variant 1 (lpc2000_v1):
- * - 2104|5|6
- * - 2114|9
- * - 2124|9
- * - 2194
- * - 2212|4
- * - 2292|4
- *
- * variant 2 (lpc2000_v2):
- * - 213x
- * - 214x
- * - 2101|2|3
- * - 2364|6|8
- * - 2378
- */
-
-int lpc2000_register_commands(struct command_context_s *cmd_ctx);
-int lpc2000_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
-int lpc2000_erase(struct flash_bank_s *bank, int first, int last);
-int lpc2000_protect(struct flash_bank_s *bank, int set, int first, int last);
-int lpc2000_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
-int lpc2000_probe(struct flash_bank_s *bank);
-int lpc2000_erase_check(struct flash_bank_s *bank);
-int lpc2000_protect_check(struct flash_bank_s *bank);
-int lpc2000_info(struct flash_bank_s *bank, char *buf, int buf_size);
-
-int lpc2000_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-
-flash_driver_t lpc2000_flash =
-{
- .name = "lpc2000",
- .register_commands = lpc2000_register_commands,
- .flash_bank_command = lpc2000_flash_bank_command,
- .erase = lpc2000_erase,
- .protect = lpc2000_protect,
- .write = lpc2000_write,
- .probe = lpc2000_probe,
- .auto_probe = lpc2000_probe,
- .erase_check = lpc2000_erase_check,
- .protect_check = lpc2000_protect_check,
- .info = lpc2000_info
-};
-
-int lpc2000_register_commands(struct command_context_s *cmd_ctx)
-{
- command_t *lpc2000_cmd = register_command(cmd_ctx, NULL, "lpc2000", NULL, COMMAND_ANY, NULL);
-
- register_command(cmd_ctx, lpc2000_cmd, "part_id", lpc2000_handle_part_id_command, COMMAND_EXEC,
- "print part id of lpc2000 flash bank <num>");
-
- return ERROR_OK;
-}
-
-int lpc2000_build_sector_list(struct flash_bank_s *bank)
-{
- lpc2000_flash_bank_t *lpc2000_info = bank->driver_priv;
-
- /* default to a 4096 write buffer */
- lpc2000_info->cmd51_max_buffer = 4096;
-
- if (lpc2000_info->variant == 1)
- {
- int i = 0;
- u32 offset = 0;
-
- /* variant 1 has different layout for 128kb and 256kb flashes */
- if (bank->size == 128 * 1024)
- {
- bank->num_sectors = 16;
- bank->sectors = malloc(sizeof(flash_sector_t) * 16);
- for (i = 0; i < 16; i++)
- {
- bank->sectors[i].offset = offset;
- bank->sectors[i].size = 8 * 1024;
- offset += bank->sectors[i].size;
- bank->sectors[i].is_erased = -1;
- bank->sectors[i].is_protected = 1;
- }
- }
- else if (bank->size == 256 * 1024)
- {
- bank->num_sectors = 18;
- bank->sectors = malloc(sizeof(flash_sector_t) * 18);
-
- for (i = 0; i < 8; i++)
- {
- bank->sectors[i].offset = offset;
- bank->sectors[i].size = 8 * 1024;
- offset += bank->sectors[i].size;
- bank->sectors[i].is_erased = -1;
- bank->sectors[i].is_protected = 1;
- }
- for (i = 8; i < 10; i++)
- {
- bank->sectors[i].offset = offset;
- bank->sectors[i].size = 64 * 1024;
- offset += bank->sectors[i].size;
- bank->sectors[i].is_erased = -1;
- bank->sectors[i].is_protected = 1;
- }
- for (i = 10; i < 18; i++)
- {
- bank->sectors[i].offset = offset;
- bank->sectors[i].size = 8 * 1024;
- offset += bank->sectors[i].size;
- bank->sectors[i].is_erased = -1;
- bank->sectors[i].is_protected = 1;
- }
- }
- else
- {
- ERROR("BUG: unknown bank->size encountered");
- exit(-1);
- }
- }
- else if (lpc2000_info->variant == 2)
- {
- int num_sectors;
- int i;
- u32 offset = 0;
-
- /* variant 2 has a uniform layout, only number of sectors differs */
- switch (bank->size)
- {
- case 4 * 1024:
- lpc2000_info->cmd51_max_buffer = 1024;
- num_sectors = 1;
- break;
- case 8 * 1024:
- lpc2000_info->cmd51_max_buffer = 1024;
- num_sectors = 2;
- break;
- case 16 * 1024:
- num_sectors = 4;
- break;
- case 32 * 1024:
- num_sectors = 8;
- break;
- case 64 * 1024:
- num_sectors = 9;
- break;
- case 128 * 1024:
- num_sectors = 11;
- break;
- case 256 * 1024:
- num_sectors = 15;
- break;
- case 512 * 1024:
- case 500 * 1024:
- num_sectors = 27;
- break;
- default:
- ERROR("BUG: unknown bank->size encountered");
- exit(-1);
- break;
- }
-
- bank->num_sectors = num_sectors;
- bank->sectors = malloc(sizeof(flash_sector_t) * num_sectors);
-
- for (i = 0; i < num_sectors; i++)
- {
- if ((i >= 0) && (i < 8))
- {
- bank->sectors[i].offset = offset;
- bank->sectors[i].size = 4 * 1024;
- offset += bank->sectors[i].size;
- bank->sectors[i].is_erased = -1;
- bank->sectors[i].is_protected = 1;
- }
- if ((i >= 8) && (i < 22))
- {
- bank->sectors[i].offset = offset;
- bank->sectors[i].size = 32 * 1024;
- offset += bank->sectors[i].size;
- bank->sectors[i].is_erased = -1;
- bank->sectors[i].is_protected = 1;
- }
- if ((i >= 22) && (i < 27))
- {
- bank->sectors[i].offset = offset;
- bank->sectors[i].size = 4 * 1024;
- offset += bank->sectors[i].size;
- bank->sectors[i].is_erased = -1;
- bank->sectors[i].is_protected = 1;
- }
- }
- }
- else
- {
- ERROR("BUG: unknown lpc2000_info->variant encountered");
- exit(-1);
- }
-
- return ERROR_OK;
-}
-
-/* call LPC2000 IAP function
- * uses 172 bytes working area
- * 0x0 to 0x7: jump gate (BX to thumb state, b -2 to wait)
- * 0x8 to 0x1f: command parameter table
- * 0x20 to 0x2b: command result table
- * 0x2c to 0xac: stack (only 128b needed)
- */
-int lpc2000_iap_call(flash_bank_t *bank, int code, u32 param_table[5], u32 result_table[2])
-{
- lpc2000_flash_bank_t *lpc2000_info = bank->driver_priv;
- target_t *target = bank->target;
- mem_param_t mem_params[2];
- reg_param_t reg_params[5];
- armv4_5_algorithm_t armv4_5_info;
- u32 status_code;
-
- /* regrab previously allocated working_area, or allocate a new one */
- if (!lpc2000_info->iap_working_area)
- {
- u8 jump_gate[8];
-
- /* make sure we have a working area */
- if (target_alloc_working_area(target, 172, &lpc2000_info->iap_working_area) != ERROR_OK)
- {
- ERROR("no working area specified, can't write LPC2000 internal flash");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- /* write IAP code to working area */
- target_buffer_set_u32(target, jump_gate, ARMV4_5_BX(12));
- target_buffer_set_u32(target, jump_gate + 4, ARMV4_5_B(0xfffffe, 0));
- target->type->write_memory(target, lpc2000_info->iap_working_area->address, 4, 2, jump_gate);
- }
-
- armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
- armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
- armv4_5_info.core_state = ARMV4_5_STATE_ARM;
-
- /* command parameter table */
- init_mem_param(&mem_params[0], lpc2000_info->iap_working_area->address + 8, 4 * 6, PARAM_OUT);
- target_buffer_set_u32(target, mem_params[0].value, code);
- target_buffer_set_u32(target, mem_params[0].value + 0x4, param_table[0]);
- target_buffer_set_u32(target, mem_params[0].value + 0x8, param_table[1]);
- target_buffer_set_u32(target, mem_params[0].value + 0xc, param_table[2]);
- target_buffer_set_u32(target, mem_params[0].value + 0x10, param_table[3]);
- target_buffer_set_u32(target, mem_params[0].value + 0x14, param_table[4]);
-
- init_reg_param(&reg_params[0], "r0", 32, PARAM_OUT);
- buf_set_u32(reg_params[0].value, 0, 32, lpc2000_info->iap_working_area->address + 0x8);
-
- /* command result table */
- init_mem_param(&mem_params[1], lpc2000_info->iap_working_area->address + 0x20, 4 * 3, PARAM_IN);
-
- init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT);
- buf_set_u32(reg_params[1].value, 0, 32, lpc2000_info->iap_working_area->address + 0x20);
-
- /* IAP entry point */
- init_reg_param(&reg_params[2], "r12", 32, PARAM_OUT);
- buf_set_u32(reg_params[2].value, 0, 32, 0x7ffffff1);
-
- /* IAP stack */
- init_reg_param(&reg_params[3], "r13_svc", 32, PARAM_OUT);
- buf_set_u32(reg_params[3].value, 0, 32, lpc2000_info->iap_working_area->address + 0xac);
-
- /* return address */
- init_reg_param(&reg_params[4], "lr_svc", 32, PARAM_OUT);
- buf_set_u32(reg_params[4].value, 0, 32, lpc2000_info->iap_working_area->address + 0x4);
-
- target->type->run_algorithm(target, 2, mem_params, 5, reg_params, lpc2000_info->iap_working_area->address, lpc2000_info->iap_working_area->address + 0x4, 10000, &armv4_5_info);
-
- status_code = buf_get_u32(mem_params[1].value, 0, 32);
- result_table[0] = target_buffer_get_u32(target, mem_params[1].value);
- result_table[1] = target_buffer_get_u32(target, mem_params[1].value + 4);
-
- destroy_mem_param(&mem_params[0]);
- destroy_mem_param(&mem_params[1]);
-
- destroy_reg_param(&reg_params[0]);
- destroy_reg_param(&reg_params[1]);
- destroy_reg_param(&reg_params[2]);
- destroy_reg_param(&reg_params[3]);
- destroy_reg_param(&reg_params[4]);
-
- return status_code;
-}
-
-int lpc2000_iap_blank_check(struct flash_bank_s *bank, int first, int last)
-{
- u32 param_table[5];
- u32 result_table[2];
- int status_code;
- int i;
-
- if ((first < 0) || (last > bank->num_sectors))
- return ERROR_FLASH_SECTOR_INVALID;
-
- for (i = first; i <= last; i++)
- {
- /* check single sector */
- param_table[0] = param_table[1] = i;
- status_code = lpc2000_iap_call(bank, 53, param_table, result_table);
-
- switch (status_code)
- {
- case ERROR_FLASH_OPERATION_FAILED:
- return ERROR_FLASH_OPERATION_FAILED;
- case LPC2000_CMD_SUCCESS:
- bank->sectors[i].is_erased = 1;
- break;
- case LPC2000_SECTOR_NOT_BLANK:
- bank->sectors[i].is_erased = 0;
- break;
- case LPC2000_INVALID_SECTOR:
- bank->sectors[i].is_erased = 0;
- break;
- case LPC2000_BUSY:
- return ERROR_FLASH_BUSY;
- break;
- default:
- ERROR("BUG: unknown LPC2000 status code");
- exit(-1);
- }
- }
-
- return ERROR_OK;
-}
-
-/* flash bank lpc2000 <base> <size> 0 0 <target#> <lpc_variant> <cclk> [calc_checksum]
- */
-int lpc2000_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
-{
- lpc2000_flash_bank_t *lpc2000_info;
-
- if (argc < 8)
- {
- WARNING("incomplete flash_bank lpc2000 configuration");
- return ERROR_FLASH_BANK_INVALID;
- }
-
- lpc2000_info = malloc(sizeof(lpc2000_flash_bank_t));
- bank->driver_priv = lpc2000_info;
-
- if (strcmp(args[6], "lpc2000_v1") == 0)
- {
- lpc2000_info->variant = 1;
- lpc2000_info->cmd51_dst_boundary = 512;
- lpc2000_info->cmd51_can_256b = 0;
- lpc2000_info->cmd51_can_8192b = 1;
- }
- else if (strcmp(args[6], "lpc2000_v2") == 0)
- {
- lpc2000_info->variant = 2;
- lpc2000_info->cmd51_dst_boundary = 256;
- lpc2000_info->cmd51_can_256b = 1;
- lpc2000_info->cmd51_can_8192b = 0;
- }
- else
- {
- ERROR("unknown LPC2000 variant");
- free(lpc2000_info);
- return ERROR_FLASH_BANK_INVALID;
- }
-
- lpc2000_info->iap_working_area = NULL;
- lpc2000_info->cclk = strtoul(args[7], NULL, 0);
- lpc2000_info->calc_checksum = 0;
- lpc2000_build_sector_list(bank);
-
- if (argc >= 9)
- {
- if (strcmp(args[8], "calc_checksum") == 0)
- lpc2000_info->calc_checksum = 1;
- }
-
- return ERROR_OK;
-}
-
-int lpc2000_erase(struct flash_bank_s *bank, int first, int last)
-{
- lpc2000_flash_bank_t *lpc2000_info = bank->driver_priv;
- u32 param_table[5];
- u32 result_table[2];
- int status_code;
-
- param_table[0] = first;
- param_table[1] = last;
- param_table[2] = lpc2000_info->cclk;
-
- /* Prepare sectors */
- status_code = lpc2000_iap_call(bank, 50, param_table, result_table);
- switch (status_code)
- {
- case ERROR_FLASH_OPERATION_FAILED:
- return ERROR_FLASH_OPERATION_FAILED;
- case LPC2000_CMD_SUCCESS:
- break;
- case LPC2000_INVALID_SECTOR:
- return ERROR_FLASH_SECTOR_INVALID;
- break;
- default:
- WARNING("lpc2000 prepare sectors returned %i", status_code);
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- /* Erase sectors */
- status_code = lpc2000_iap_call(bank, 52, param_table, result_table);
- switch (status_code)
- {
- case ERROR_FLASH_OPERATION_FAILED:
- return ERROR_FLASH_OPERATION_FAILED;
- case LPC2000_CMD_SUCCESS:
- break;
- case LPC2000_INVALID_SECTOR:
- return ERROR_FLASH_SECTOR_INVALID;
- break;
- default:
- WARNING("lpc2000 erase sectors returned %i", status_code);
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- return ERROR_OK;
-}
-
-int lpc2000_protect(struct flash_bank_s *bank, int set, int first, int last)
-{
- /* can't protect/unprotect on the lpc2000 */
- return ERROR_OK;
-}
-
-int lpc2000_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
-{
- lpc2000_flash_bank_t *lpc2000_info = bank->driver_priv;
- target_t *target = bank->target;
- u32 dst_min_alignment;
- u32 bytes_remaining = count;
- u32 bytes_written = 0;
- int first_sector = 0;
- int last_sector = 0;
- u32 param_table[5];
- u32 result_table[2];
- int status_code;
- int i;
- working_area_t *download_area;
-
- /* allocate a working area */
- if (target_alloc_working_area(target, lpc2000_info->cmd51_max_buffer, &download_area) != ERROR_OK)
- {
- ERROR("no working area specified, can't write LPC2000 internal flash");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- if (offset + count > bank->size)
- return ERROR_FLASH_DST_OUT_OF_BANK;
-
- if (lpc2000_info->cmd51_can_256b)
- dst_min_alignment = 256;
- else
- dst_min_alignment = 512;
-
- if (offset % dst_min_alignment)
- {
- WARNING("offset 0x%x breaks required alignment 0x%x", offset, dst_min_alignment);
- return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
- }
-
- for (i = 0; i < bank->num_sectors; i++)
- {
- if (offset >= bank->sectors[i].offset)
- first_sector = i;
- if (offset + CEIL(count, dst_min_alignment) * dst_min_alignment > bank->sectors[i].offset)
- last_sector = i;
- }
-
- DEBUG("first_sector: %i, last_sector: %i", first_sector, last_sector);
-
- /* check if exception vectors should be flashed */
- if ((offset == 0) && (count >= 0x20) && lpc2000_info->calc_checksum)
- {
- u32 checksum = 0;
- int i = 0;
- for (i = 0; i < 8; i++)
- {
- DEBUG("0x%2.2x: 0x%8.8x", i * 4, buf_get_u32(buffer + (i * 4), 0, 32));
- if (i != 5)
- checksum += buf_get_u32(buffer + (i * 4), 0, 32);
- }
- checksum = 0 - checksum;
- DEBUG("checksum: 0x%8.8x", checksum);
- buf_set_u32(buffer + 0x14, 0, 32, checksum);
- }
-
- while (bytes_remaining > 0)
- {
- u32 thisrun_bytes;
- if (bytes_remaining >= lpc2000_info->cmd51_max_buffer)
- thisrun_bytes = lpc2000_info->cmd51_max_buffer;
- else if (bytes_remaining >= 1024)
- thisrun_bytes = 1024;
- else if ((bytes_remaining >= 512) || (!lpc2000_info->cmd51_can_256b))
- thisrun_bytes = 512;
- else
- thisrun_bytes = 256;
-
- /* Prepare sectors */
- param_table[0] = first_sector;
- param_table[1] = last_sector;
- status_code = lpc2000_iap_call(bank, 50, param_table, result_table);
- switch (status_code)
- {
- case ERROR_FLASH_OPERATION_FAILED:
- return ERROR_FLASH_OPERATION_FAILED;
- case LPC2000_CMD_SUCCESS:
- break;
- case LPC2000_INVALID_SECTOR:
- return ERROR_FLASH_SECTOR_INVALID;
- break;
- default:
- WARNING("lpc2000 prepare sectors returned %i", status_code);
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- if (bytes_remaining >= thisrun_bytes)
- {
- if (target_write_buffer(bank->target, download_area->address, thisrun_bytes, buffer + bytes_written) != ERROR_OK)
- {
- target_free_working_area(target, download_area);
- return ERROR_FLASH_OPERATION_FAILED;
- }
- }
- else
- {
- u8 *last_buffer = malloc(thisrun_bytes);
- int i;
- memcpy(last_buffer, buffer + bytes_written, bytes_remaining);
- for (i = bytes_remaining; i < thisrun_bytes; i++)
- last_buffer[i] = 0xff;
- target_write_buffer(bank->target, download_area->address, thisrun_bytes, last_buffer);
- free(last_buffer);
- }
-
- DEBUG("writing 0x%x bytes to address 0x%x", thisrun_bytes, bank->base + offset + bytes_written);
-
- /* Write data */
- param_table[0] = bank->base + offset + bytes_written;
- param_table[1] = download_area->address;
- param_table[2] = thisrun_bytes;
- param_table[3] = lpc2000_info->cclk;
- status_code = lpc2000_iap_call(bank, 51, param_table, result_table);
- switch (status_code)
- {
- case ERROR_FLASH_OPERATION_FAILED:
- return ERROR_FLASH_OPERATION_FAILED;
- case LPC2000_CMD_SUCCESS:
- break;
- case LPC2000_INVALID_SECTOR:
- return ERROR_FLASH_SECTOR_INVALID;
- break;
- default:
- WARNING("lpc2000 returned %i", status_code);
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- if (bytes_remaining > thisrun_bytes)
- bytes_remaining -= thisrun_bytes;
- else
- bytes_remaining = 0;
- bytes_written += thisrun_bytes;
- }
-
- target_free_working_area(target, download_area);
-
- return ERROR_OK;
-}
-
-int lpc2000_probe(struct flash_bank_s *bank)
-{
- /* we can't probe on an lpc2000
- * if this is an lpc2xxx, it has the configured flash
- */
- return ERROR_OK;
-}
-
-int lpc2000_erase_check(struct flash_bank_s *bank)
-{
- if (bank->target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- return lpc2000_iap_blank_check(bank, 0, bank->num_sectors - 1);
-}
-
-int lpc2000_protect_check(struct flash_bank_s *bank)
-{
- /* sectors are always protected */
- return ERROR_OK;
-}
-
-int lpc2000_info(struct flash_bank_s *bank, char *buf, int buf_size)
-{
- lpc2000_flash_bank_t *lpc2000_info = bank->driver_priv;
-
- snprintf(buf, buf_size, "lpc2000 flash driver variant: %i, clk: %i", lpc2000_info->variant, lpc2000_info->cclk);
-
- return ERROR_OK;
-}
-
-int lpc2000_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *bank;
- u32 param_table[5];
- u32 result_table[2];
- int status_code;
- lpc2000_flash_bank_t *lpc2000_info;
-
- if (argc < 1)
- {
+/***************************************************************************
+ * Copyright (C) 2005 by Dominic Rath *
+ * Dominic.Rath@gmx.de *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "lpc2000.h"
+
+#include "flash.h"
+#include "target.h"
+#include "log.h"
+#include "armv4_5.h"
+#include "algorithm.h"
+#include "binarybuffer.h"
+
+#include <stdlib.h>
+#include <string.h>
+
+/* flash programming support for Philips LPC2xxx devices
+ * currently supported devices:
+ * variant 1 (lpc2000_v1):
+ * - 2104|5|6
+ * - 2114|9
+ * - 2124|9
+ * - 2194
+ * - 2212|4
+ * - 2292|4
+ *
+ * variant 2 (lpc2000_v2):
+ * - 213x
+ * - 214x
+ * - 2101|2|3
+ * - 2364|6|8
+ * - 2378
+ */
+
+int lpc2000_register_commands(struct command_context_s *cmd_ctx);
+int lpc2000_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
+int lpc2000_erase(struct flash_bank_s *bank, int first, int last);
+int lpc2000_protect(struct flash_bank_s *bank, int set, int first, int last);
+int lpc2000_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
+int lpc2000_probe(struct flash_bank_s *bank);
+int lpc2000_erase_check(struct flash_bank_s *bank);
+int lpc2000_protect_check(struct flash_bank_s *bank);
+int lpc2000_info(struct flash_bank_s *bank, char *buf, int buf_size);
+
+int lpc2000_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+
+flash_driver_t lpc2000_flash =
+{
+ .name = "lpc2000",
+ .register_commands = lpc2000_register_commands,
+ .flash_bank_command = lpc2000_flash_bank_command,
+ .erase = lpc2000_erase,
+ .protect = lpc2000_protect,
+ .write = lpc2000_write,
+ .probe = lpc2000_probe,
+ .auto_probe = lpc2000_probe,
+ .erase_check = lpc2000_erase_check,
+ .protect_check = lpc2000_protect_check,
+ .info = lpc2000_info
+};
+
+int lpc2000_register_commands(struct command_context_s *cmd_ctx)
+{
+ command_t *lpc2000_cmd = register_command(cmd_ctx, NULL, "lpc2000", NULL, COMMAND_ANY, NULL);
+
+ register_command(cmd_ctx, lpc2000_cmd, "part_id", lpc2000_handle_part_id_command, COMMAND_EXEC,
+ "print part id of lpc2000 flash bank <num>");
+
+ return ERROR_OK;
+}
+
+int lpc2000_build_sector_list(struct flash_bank_s *bank)
+{
+ lpc2000_flash_bank_t *lpc2000_info = bank->driver_priv;
+
+ /* default to a 4096 write buffer */
+ lpc2000_info->cmd51_max_buffer = 4096;
+
+ if (lpc2000_info->variant == 1)
+ {
+ int i = 0;
+ u32 offset = 0;
+
+ /* variant 1 has different layout for 128kb and 256kb flashes */
+ if (bank->size == 128 * 1024)
+ {
+ bank->num_sectors = 16;
+ bank->sectors = malloc(sizeof(flash_sector_t) * 16);
+ for (i = 0; i < 16; i++)
+ {
+ bank->sectors[i].offset = offset;
+ bank->sectors[i].size = 8 * 1024;
+ offset += bank->sectors[i].size;
+ bank->sectors[i].is_erased = -1;
+ bank->sectors[i].is_protected = 1;
+ }
+ }
+ else if (bank->size == 256 * 1024)
+ {
+ bank->num_sectors = 18;
+ bank->sectors = malloc(sizeof(flash_sector_t) * 18);
+
+ for (i = 0; i < 8; i++)
+ {
+ bank->sectors[i].offset = offset;
+ bank->sectors[i].size = 8 * 1024;
+ offset += bank->sectors[i].size;
+ bank->sectors[i].is_erased = -1;
+ bank->sectors[i].is_protected = 1;
+ }
+ for (i = 8; i < 10; i++)
+ {
+ bank->sectors[i].offset = offset;
+ bank->sectors[i].size = 64 * 1024;
+ offset += bank->sectors[i].size;
+ bank->sectors[i].is_erased = -1;
+ bank->sectors[i].is_protected = 1;
+ }
+ for (i = 10; i < 18; i++)
+ {
+ bank->sectors[i].offset = offset;
+ bank->sectors[i].size = 8 * 1024;
+ offset += bank->sectors[i].size;
+ bank->sectors[i].is_erased = -1;
+ bank->sectors[i].is_protected = 1;
+ }
+ }
+ else
+ {
+ ERROR("BUG: unknown bank->size encountered");
+ exit(-1);
+ }
+ }
+ else if (lpc2000_info->variant == 2)
+ {
+ int num_sectors;
+ int i;
+ u32 offset = 0;
+
+ /* variant 2 has a uniform layout, only number of sectors differs */
+ switch (bank->size)
+ {
+ case 4 * 1024:
+ lpc2000_info->cmd51_max_buffer = 1024;
+ num_sectors = 1;
+ break;
+ case 8 * 1024:
+ lpc2000_info->cmd51_max_buffer = 1024;
+ num_sectors = 2;
+ break;
+ case 16 * 1024:
+ num_sectors = 4;
+ break;
+ case 32 * 1024:
+ num_sectors = 8;
+ break;
+ case 64 * 1024:
+ num_sectors = 9;
+ break;
+ case 128 * 1024:
+ num_sectors = 11;
+ break;
+ case 256 * 1024:
+ num_sectors = 15;
+ break;
+ case 512 * 1024:
+ case 500 * 1024:
+ num_sectors = 27;
+ break;
+ default:
+ ERROR("BUG: unknown bank->size encountered");
+ exit(-1);
+ break;
+ }
+
+ bank->num_sectors = num_sectors;
+ bank->sectors = malloc(sizeof(flash_sector_t) * num_sectors);
+
+ for (i = 0; i < num_sectors; i++)
+ {
+ if ((i >= 0) && (i < 8))
+ {
+ bank->sectors[i].offset = offset;
+ bank->sectors[i].size = 4 * 1024;
+ offset += bank->sectors[i].size;
+ bank->sectors[i].is_erased = -1;
+ bank->sectors[i].is_protected = 1;
+ }
+ if ((i >= 8) && (i < 22))
+ {
+ bank->sectors[i].offset = offset;
+ bank->sectors[i].size = 32 * 1024;
+ offset += bank->sectors[i].size;
+ bank->sectors[i].is_erased = -1;
+ bank->sectors[i].is_protected = 1;
+ }
+ if ((i >= 22) && (i < 27))
+ {
+ bank->sectors[i].offset = offset;
+ bank->sectors[i].size = 4 * 1024;
+ offset += bank->sectors[i].size;
+ bank->sectors[i].is_erased = -1;
+ bank->sectors[i].is_protected = 1;
+ }
+ }
+ }
+ else
+ {
+ ERROR("BUG: unknown lpc2000_info->variant encountered");
+ exit(-1);
+ }
+
+ return ERROR_OK;
+}
+
+/* call LPC2000 IAP function
+ * uses 172 bytes working area
+ * 0x0 to 0x7: jump gate (BX to thumb state, b -2 to wait)
+ * 0x8 to 0x1f: command parameter table
+ * 0x20 to 0x2b: command result table
+ * 0x2c to 0xac: stack (only 128b needed)
+ */
+int lpc2000_iap_call(flash_bank_t *bank, int code, u32 param_table[5], u32 result_table[2])
+{
+ lpc2000_flash_bank_t *lpc2000_info = bank->driver_priv;
+ target_t *target = bank->target;
+ mem_param_t mem_params[2];
+ reg_param_t reg_params[5];
+ armv4_5_algorithm_t armv4_5_info;
+ u32 status_code;
+
+ /* regrab previously allocated working_area, or allocate a new one */
+ if (!lpc2000_info->iap_working_area)
+ {
+ u8 jump_gate[8];
+
+ /* make sure we have a working area */
+ if (target_alloc_working_area(target, 172, &lpc2000_info->iap_working_area) != ERROR_OK)
+ {
+ ERROR("no working area specified, can't write LPC2000 internal flash");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ /* write IAP code to working area */
+ target_buffer_set_u32(target, jump_gate, ARMV4_5_BX(12));
+ target_buffer_set_u32(target, jump_gate + 4, ARMV4_5_B(0xfffffe, 0));
+ target->type->write_memory(target, lpc2000_info->iap_working_area->address, 4, 2, jump_gate);
+ }
+
+ armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
+ armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
+ armv4_5_info.core_state = ARMV4_5_STATE_ARM;
+
+ /* command parameter table */
+ init_mem_param(&mem_params[0], lpc2000_info->iap_working_area->address + 8, 4 * 6, PARAM_OUT);
+ target_buffer_set_u32(target, mem_params[0].value, code);
+ target_buffer_set_u32(target, mem_params[0].value + 0x4, param_table[0]);
+ target_buffer_set_u32(target, mem_params[0].value + 0x8, param_table[1]);
+ target_buffer_set_u32(target, mem_params[0].value + 0xc, param_table[2]);
+ target_buffer_set_u32(target, mem_params[0].value + 0x10, param_table[3]);
+ target_buffer_set_u32(target, mem_params[0].value + 0x14, param_table[4]);
+
+ init_reg_param(&reg_params[0], "r0", 32, PARAM_OUT);
+ buf_set_u32(reg_params[0].value, 0, 32, lpc2000_info->iap_working_area->address + 0x8);
+
+ /* command result table */
+ init_mem_param(&mem_params[1], lpc2000_info->iap_working_area->address + 0x20, 4 * 3, PARAM_IN);
+
+ init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT);
+ buf_set_u32(reg_params[1].value, 0, 32, lpc2000_info->iap_working_area->address + 0x20);
+
+ /* IAP entry point */
+ init_reg_param(&reg_params[2], "r12", 32, PARAM_OUT);
+ buf_set_u32(reg_params[2].value, 0, 32, 0x7ffffff1);
+
+ /* IAP stack */
+ init_reg_param(&reg_params[3], "r13_svc", 32, PARAM_OUT);
+ buf_set_u32(reg_params[3].value, 0, 32, lpc2000_info->iap_working_area->address + 0xac);
+
+ /* return address */
+ init_reg_param(&reg_params[4], "lr_svc", 32, PARAM_OUT);
+ buf_set_u32(reg_params[4].value, 0, 32, lpc2000_info->iap_working_area->address + 0x4);
+
+ target->type->run_algorithm(target, 2, mem_params, 5, reg_params, lpc2000_info->iap_working_area->address, lpc2000_info->iap_working_area->address + 0x4, 10000, &armv4_5_info);
+
+ status_code = buf_get_u32(mem_params[1].value, 0, 32);
+ result_table[0] = target_buffer_get_u32(target, mem_params[1].value);
+ result_table[1] = target_buffer_get_u32(target, mem_params[1].value + 4);
+
+ destroy_mem_param(&mem_params[0]);
+ destroy_mem_param(&mem_params[1]);
+
+ destroy_reg_param(&reg_params[0]);
+ destroy_reg_param(&reg_params[1]);
+ destroy_reg_param(&reg_params[2]);
+ destroy_reg_param(&reg_params[3]);
+ destroy_reg_param(&reg_params[4]);
+
+ return status_code;
+}
+
+int lpc2000_iap_blank_check(struct flash_bank_s *bank, int first, int last)
+{
+ u32 param_table[5];
+ u32 result_table[2];
+ int status_code;
+ int i;
+
+ if ((first < 0) || (last > bank->num_sectors))
+ return ERROR_FLASH_SECTOR_INVALID;
+
+ for (i = first; i <= last; i++)
+ {
+ /* check single sector */
+ param_table[0] = param_table[1] = i;
+ status_code = lpc2000_iap_call(bank, 53, param_table, result_table);
+
+ switch (status_code)
+ {
+ case ERROR_FLASH_OPERATION_FAILED:
+ return ERROR_FLASH_OPERATION_FAILED;
+ case LPC2000_CMD_SUCCESS:
+ bank->sectors[i].is_erased = 1;
+ break;
+ case LPC2000_SECTOR_NOT_BLANK:
+ bank->sectors[i].is_erased = 0;
+ break;
+ case LPC2000_INVALID_SECTOR:
+ bank->sectors[i].is_erased = 0;
+ break;
+ case LPC2000_BUSY:
+ return ERROR_FLASH_BUSY;
+ break;
+ default:
+ ERROR("BUG: unknown LPC2000 status code");
+ exit(-1);
+ }
+ }
+
+ return ERROR_OK;
+}
+
+/* flash bank lpc2000 <base> <size> 0 0 <target#> <lpc_variant> <cclk> [calc_checksum]
+ */
+int lpc2000_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
+{
+ lpc2000_flash_bank_t *lpc2000_info;
+
+ if (argc < 8)
+ {
+ WARNING("incomplete flash_bank lpc2000 configuration");
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ lpc2000_info = malloc(sizeof(lpc2000_flash_bank_t));
+ bank->driver_priv = lpc2000_info;
+
+ if (strcmp(args[6], "lpc2000_v1") == 0)
+ {
+ lpc2000_info->variant = 1;
+ lpc2000_info->cmd51_dst_boundary = 512;
+ lpc2000_info->cmd51_can_256b = 0;
+ lpc2000_info->cmd51_can_8192b = 1;
+ }
+ else if (strcmp(args[6], "lpc2000_v2") == 0)
+ {
+ lpc2000_info->variant = 2;
+ lpc2000_info->cmd51_dst_boundary = 256;
+ lpc2000_info->cmd51_can_256b = 1;
+ lpc2000_info->cmd51_can_8192b = 0;
+ }
+ else
+ {
+ ERROR("unknown LPC2000 variant");
+ free(lpc2000_info);
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ lpc2000_info->iap_working_area = NULL;
+ lpc2000_info->cclk = strtoul(args[7], NULL, 0);
+ lpc2000_info->calc_checksum = 0;
+ lpc2000_build_sector_list(bank);
+
+ if (argc >= 9)
+ {
+ if (strcmp(args[8], "calc_checksum") == 0)
+ lpc2000_info->calc_checksum = 1;
+ }
+
+ return ERROR_OK;
+}
+
+int lpc2000_erase(struct flash_bank_s *bank, int first, int last)
+{
+ lpc2000_flash_bank_t *lpc2000_info = bank->driver_priv;
+ u32 param_table[5];
+ u32 result_table[2];
+ int status_code;
+
+ param_table[0] = first;
+ param_table[1] = last;
+ param_table[2] = lpc2000_info->cclk;
+
+ /* Prepare sectors */
+ status_code = lpc2000_iap_call(bank, 50, param_table, result_table);
+ switch (status_code)
+ {
+ case ERROR_FLASH_OPERATION_FAILED:
+ return ERROR_FLASH_OPERATION_FAILED;
+ case LPC2000_CMD_SUCCESS:
+ break;
+ case LPC2000_INVALID_SECTOR:
+ return ERROR_FLASH_SECTOR_INVALID;
+ break;
+ default:
+ WARNING("lpc2000 prepare sectors returned %i", status_code);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ /* Erase sectors */
+ status_code = lpc2000_iap_call(bank, 52, param_table, result_table);
+ switch (status_code)
+ {
+ case ERROR_FLASH_OPERATION_FAILED:
+ return ERROR_FLASH_OPERATION_FAILED;
+ case LPC2000_CMD_SUCCESS:
+ break;
+ case LPC2000_INVALID_SECTOR:
+ return ERROR_FLASH_SECTOR_INVALID;
+ break;
+ default:
+ WARNING("lpc2000 erase sectors returned %i", status_code);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ return ERROR_OK;
+}
+
+int lpc2000_protect(struct flash_bank_s *bank, int set, int first, int last)
+{
+ /* can't protect/unprotect on the lpc2000 */
+ return ERROR_OK;
+}
+
+int lpc2000_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
+{
+ lpc2000_flash_bank_t *lpc2000_info = bank->driver_priv;
+ target_t *target = bank->target;
+ u32 dst_min_alignment;
+ u32 bytes_remaining = count;
+ u32 bytes_written = 0;
+ int first_sector = 0;
+ int last_sector = 0;
+ u32 param_table[5];
+ u32 result_table[2];
+ int status_code;
+ int i;
+ working_area_t *download_area;
+
+ /* allocate a working area */
+ if (target_alloc_working_area(target, lpc2000_info->cmd51_max_buffer, &download_area) != ERROR_OK)
+ {
+ ERROR("no working area specified, can't write LPC2000 internal flash");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ if (offset + count > bank->size)
+ return ERROR_FLASH_DST_OUT_OF_BANK;
+
+ if (lpc2000_info->cmd51_can_256b)
+ dst_min_alignment = 256;
+ else
+ dst_min_alignment = 512;
+
+ if (offset % dst_min_alignment)
+ {
+ WARNING("offset 0x%x breaks required alignment 0x%x", offset, dst_min_alignment);
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ }
+
+ for (i = 0; i < bank->num_sectors; i++)
+ {
+ if (offset >= bank->sectors[i].offset)
+ first_sector = i;
+ if (offset + CEIL(count, dst_min_alignment) * dst_min_alignment > bank->sectors[i].offset)
+ last_sector = i;
+ }
+
+ DEBUG("first_sector: %i, last_sector: %i", first_sector, last_sector);
+
+ /* check if exception vectors should be flashed */
+ if ((offset == 0) && (count >= 0x20) && lpc2000_info->calc_checksum)
+ {
+ u32 checksum = 0;
+ int i = 0;
+ for (i = 0; i < 8; i++)
+ {
+ DEBUG("0x%2.2x: 0x%8.8x", i * 4, buf_get_u32(buffer + (i * 4), 0, 32));
+ if (i != 5)
+ checksum += buf_get_u32(buffer + (i * 4), 0, 32);
+ }
+ checksum = 0 - checksum;
+ DEBUG("checksum: 0x%8.8x", checksum);
+ buf_set_u32(buffer + 0x14, 0, 32, checksum);
+ }
+
+ while (bytes_remaining > 0)
+ {
+ u32 thisrun_bytes;
+ if (bytes_remaining >= lpc2000_info->cmd51_max_buffer)
+ thisrun_bytes = lpc2000_info->cmd51_max_buffer;
+ else if (bytes_remaining >= 1024)
+ thisrun_bytes = 1024;
+ else if ((bytes_remaining >= 512) || (!lpc2000_info->cmd51_can_256b))
+ thisrun_bytes = 512;
+ else
+ thisrun_bytes = 256;
+
+ /* Prepare sectors */
+ param_table[0] = first_sector;
+ param_table[1] = last_sector;
+ status_code = lpc2000_iap_call(bank, 50, param_table, result_table);
+ switch (status_code)
+ {
+ case ERROR_FLASH_OPERATION_FAILED:
+ return ERROR_FLASH_OPERATION_FAILED;
+ case LPC2000_CMD_SUCCESS:
+ break;
+ case LPC2000_INVALID_SECTOR:
+ return ERROR_FLASH_SECTOR_INVALID;
+ break;
+ default:
+ WARNING("lpc2000 prepare sectors returned %i", status_code);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ if (bytes_remaining >= thisrun_bytes)
+ {
+ if (target_write_buffer(bank->target, download_area->address, thisrun_bytes, buffer + bytes_written) != ERROR_OK)
+ {
+ target_free_working_area(target, download_area);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ }
+ else
+ {
+ u8 *last_buffer = malloc(thisrun_bytes);
+ int i;
+ memcpy(last_buffer, buffer + bytes_written, bytes_remaining);
+ for (i = bytes_remaining; i < thisrun_bytes; i++)
+ last_buffer[i] = 0xff;
+ target_write_buffer(bank->target, download_area->address, thisrun_bytes, last_buffer);
+ free(last_buffer);
+ }
+
+ DEBUG("writing 0x%x bytes to address 0x%x", thisrun_bytes, bank->base + offset + bytes_written);
+
+ /* Write data */
+ param_table[0] = bank->base + offset + bytes_written;
+ param_table[1] = download_area->address;
+ param_table[2] = thisrun_bytes;
+ param_table[3] = lpc2000_info->cclk;
+ status_code = lpc2000_iap_call(bank, 51, param_table, result_table);
+ switch (status_code)
+ {
+ case ERROR_FLASH_OPERATION_FAILED:
+ return ERROR_FLASH_OPERATION_FAILED;
+ case LPC2000_CMD_SUCCESS:
+ break;
+ case LPC2000_INVALID_SECTOR:
+ return ERROR_FLASH_SECTOR_INVALID;
+ break;
+ default:
+ WARNING("lpc2000 returned %i", status_code);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ if (bytes_remaining > thisrun_bytes)
+ bytes_remaining -= thisrun_bytes;
+ else
+ bytes_remaining = 0;
+ bytes_written += thisrun_bytes;
+ }
+
+ target_free_working_area(target, download_area);
+
+ return ERROR_OK;
+}
+
+int lpc2000_probe(struct flash_bank_s *bank)
+{
+ /* we can't probe on an lpc2000
+ * if this is an lpc2xxx, it has the configured flash
+ */
+ return ERROR_OK;
+}
+
+int lpc2000_erase_check(struct flash_bank_s *bank)
+{
+ if (bank->target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ return lpc2000_iap_blank_check(bank, 0, bank->num_sectors - 1);
+}
+
+int lpc2000_protect_check(struct flash_bank_s *bank)
+{
+ /* sectors are always protected */
+ return ERROR_OK;
+}
+
+int lpc2000_info(struct flash_bank_s *bank, char *buf, int buf_size)
+{
+ lpc2000_flash_bank_t *lpc2000_info = bank->driver_priv;
+
+ snprintf(buf, buf_size, "lpc2000 flash driver variant: %i, clk: %i", lpc2000_info->variant, lpc2000_info->cclk);
+
+ return ERROR_OK;
+}
+
+int lpc2000_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *bank;
+ u32 param_table[5];
+ u32 result_table[2];
+ int status_code;
+ lpc2000_flash_bank_t *lpc2000_info;
+
+ if (argc < 1)
+ {
return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!bank)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- lpc2000_info = bank->driver_priv;
- if (bank->target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if ((status_code = lpc2000_iap_call(bank, 54, param_table, result_table)) != 0x0)
- {
- if (status_code == ERROR_FLASH_OPERATION_FAILED)
- {
- command_print(cmd_ctx, "no sufficient working area specified, can't access LPC2000 IAP interface");
- return ERROR_OK;
- }
- command_print(cmd_ctx, "lpc2000 IAP returned status code %i", status_code);
- }
- else
- {
- command_print(cmd_ctx, "lpc2000 part id: 0x%8.8x", result_table[0]);
- }
-
- return ERROR_OK;
-}
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!bank)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ lpc2000_info = bank->driver_priv;
+ if (bank->target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if ((status_code = lpc2000_iap_call(bank, 54, param_table, result_table)) != 0x0)
+ {
+ if (status_code == ERROR_FLASH_OPERATION_FAILED)
+ {
+ command_print(cmd_ctx, "no sufficient working area specified, can't access LPC2000 IAP interface");
+ return ERROR_OK;
+ }
+ command_print(cmd_ctx, "lpc2000 IAP returned status code %i", status_code);
+ }
+ else
+ {
+ command_print(cmd_ctx, "lpc2000 part id: 0x%8.8x", result_table[0]);
+ }
+
+ return ERROR_OK;
+}
diff --git a/src/flash/lpc3180_nand_controller.c b/src/flash/lpc3180_nand_controller.c
index 4e1fd2e7..2874f62f 100644
--- a/src/flash/lpc3180_nand_controller.c
+++ b/src/flash/lpc3180_nand_controller.c
@@ -1,915 +1,915 @@
-/***************************************************************************
- * Copyright (C) 2007 by Dominic Rath *
- * Dominic.Rath@gmx.de *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- ***************************************************************************/
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "lpc3180_nand_controller.h"
-
-#include "replacements.h"
-#include "log.h"
-
-#include <stdlib.h>
-#include <string.h>
-
-#include "nand.h"
-#include "target.h"
-
-int lpc3180_nand_device_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct nand_device_s *device);
-int lpc3180_register_commands(struct command_context_s *cmd_ctx);
-int lpc3180_init(struct nand_device_s *device);
-int lpc3180_reset(struct nand_device_s *device);
-int lpc3180_command(struct nand_device_s *device, u8 command);
-int lpc3180_address(struct nand_device_s *device, u8 address);
-int lpc3180_write_data(struct nand_device_s *device, u16 data);
-int lpc3180_read_data(struct nand_device_s *device, void *data);
-int lpc3180_write_page(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size);
-int lpc3180_read_page(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size);
-int lpc3180_controller_ready(struct nand_device_s *device, int timeout);
-int lpc3180_nand_ready(struct nand_device_s *device, int timeout);
-
-int handle_lpc3180_select_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-
-nand_flash_controller_t lpc3180_nand_controller =
-{
- .name = "lpc3180",
- .nand_device_command = lpc3180_nand_device_command,
- .register_commands = lpc3180_register_commands,
- .init = lpc3180_init,
- .reset = lpc3180_reset,
- .command = lpc3180_command,
- .address = lpc3180_address,
- .write_data = lpc3180_write_data,
- .read_data = lpc3180_read_data,
- .write_page = lpc3180_write_page,
- .read_page = lpc3180_read_page,
- .controller_ready = lpc3180_controller_ready,
- .nand_ready = lpc3180_nand_ready,
-};
-
-/* nand device lpc3180 <target#> <oscillator_frequency>
- */
-int lpc3180_nand_device_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct nand_device_s *device)
-{
- lpc3180_nand_controller_t *lpc3180_info;
-
- if (argc < 3)
- {
- WARNING("incomplete 'lpc3180' nand flash configuration");
- return ERROR_FLASH_BANK_INVALID;
- }
-
- lpc3180_info = malloc(sizeof(lpc3180_nand_controller_t));
- device->controller_priv = lpc3180_info;
-
- lpc3180_info->target = get_target_by_num(strtoul(args[1], NULL, 0));
- if (!lpc3180_info->target)
- {
- ERROR("no target '%s' configured", args[1]);
- return ERROR_NAND_DEVICE_INVALID;
- }
-
- lpc3180_info->osc_freq = strtoul(args[2], NULL, 0);
- if ((lpc3180_info->osc_freq < 1000) || (lpc3180_info->osc_freq > 20000))
- {
- WARNING("LPC3180 oscillator frequency should be between 1000 and 20000 kHz, was %i", lpc3180_info->osc_freq);
- }
- lpc3180_info->selected_controller = LPC3180_NO_CONTROLLER;
- lpc3180_info->sw_write_protection = 0;
- lpc3180_info->sw_wp_lower_bound = 0x0;
- lpc3180_info->sw_wp_upper_bound = 0x0;
-
- return ERROR_OK;
-}
-
-int lpc3180_register_commands(struct command_context_s *cmd_ctx)
-{
- command_t *lpc3180_cmd = register_command(cmd_ctx, NULL, "lpc3180", NULL, COMMAND_ANY, "commands specific to the LPC3180 NAND flash controllers");
-
- register_command(cmd_ctx, lpc3180_cmd, "select", handle_lpc3180_select_command, COMMAND_EXEC, "select <'mlc'|'slc'> controller (default is mlc)");
-
- return ERROR_OK;
-}
-
-int lpc3180_pll(int fclkin, u32 pll_ctrl)
-{
- int bypass = (pll_ctrl & 0x8000) >> 15;
- int direct = (pll_ctrl & 0x4000) >> 14;
- int feedback = (pll_ctrl & 0x2000) >> 13;
- int p = (1 << ((pll_ctrl & 0x1800) >> 11) * 2);
- int n = ((pll_ctrl & 0x0600) >> 9) + 1;
- int m = ((pll_ctrl & 0x01fe) >> 1) + 1;
- int lock = (pll_ctrl & 0x1);
-
- if (!lock)
- WARNING("PLL is not locked");
-
- if (!bypass && direct) /* direct mode */
- return (m * fclkin) / n;
-
- if (bypass && !direct) /* bypass mode */
- return fclkin / (2 * p);
-
- if (bypass & direct) /* direct bypass mode */
- return fclkin;
-
- if (feedback) /* integer mode */
- return m * (fclkin / n);
- else /* non-integer mode */
- return (m / (2 * p)) * (fclkin / n);
-}
-
-float lpc3180_cycle_time(lpc3180_nand_controller_t *lpc3180_info)
-{
- target_t *target = lpc3180_info->target;
- u32 sysclk_ctrl, pwr_ctrl, hclkdiv_ctrl, hclkpll_ctrl;
- int sysclk;
- int hclk;
- int hclk_pll;
- float cycle;
-
- /* calculate timings */
-
- /* determine current SYSCLK (13'MHz or main oscillator) */
- target_read_u32(target, 0x40004050, &sysclk_ctrl);
-
- if ((sysclk_ctrl & 1) == 0)
- sysclk = lpc3180_info->osc_freq;
- else
- sysclk = 13000;
-
- /* determine selected HCLK source */
- target_read_u32(target, 0x40004044, &pwr_ctrl);
-
- if ((pwr_ctrl & (1 << 2)) == 0) /* DIRECT RUN mode */
- {
- hclk = sysclk;
- }
- else
- {
- target_read_u32(target, 0x40004058, &hclkpll_ctrl);
- hclk_pll = lpc3180_pll(sysclk, hclkpll_ctrl);
-
- target_read_u32(target, 0x40004040, &hclkdiv_ctrl);
-
- if (pwr_ctrl & (1 << 10)) /* ARM_CLK and HCLK use PERIPH_CLK */
- {
- hclk = hclk_pll / (((hclkdiv_ctrl & 0x7c) >> 2) + 1);
- }
- else /* HCLK uses HCLK_PLL */
- {
- hclk = hclk_pll / (1 << (hclkdiv_ctrl & 0x3));
- }
- }
-
- DEBUG("LPC3180 HCLK currently clocked at %i kHz", hclk);
-
- cycle = (1.0 / hclk) * 1000000.0;
-
- return cycle;
-}
-
-int lpc3180_init(struct nand_device_s *device)
-{
- lpc3180_nand_controller_t *lpc3180_info = device->controller_priv;
- target_t *target = lpc3180_info->target;
- int bus_width = (device->bus_width) ? (device->bus_width) : 8;
- int address_cycles = (device->address_cycles) ? (device->address_cycles) : 3;
- int page_size = (device->page_size) ? (device->page_size) : 512;
-
- if (target->state != TARGET_HALTED)
- {
- ERROR("target must be halted to use LPC3180 NAND flash controller");
- return ERROR_NAND_OPERATION_FAILED;
- }
-
- /* sanitize arguments */
- if ((bus_width != 8) && (bus_width != 16))
- {
- ERROR("LPC3180 only supports 8 or 16 bit bus width, not %i", bus_width);
- return ERROR_NAND_OPERATION_NOT_SUPPORTED;
- }
-
- /* The LPC3180 only brings out 8 bit NAND data bus, but the controller
- * would support 16 bit, too, so we just warn about this for now
- */
- if (bus_width == 16)
- {
- WARNING("LPC3180 only supports 8 bit bus width");
- }
-
- /* inform calling code about selected bus width */
- device->bus_width = bus_width;
-
- if ((address_cycles != 3) && (address_cycles != 4))
- {
- ERROR("LPC3180 only supports 3 or 4 address cycles, not %i", address_cycles);
- return ERROR_NAND_OPERATION_NOT_SUPPORTED;
- }
-
- if ((page_size != 512) && (page_size != 2048))
- {
- ERROR("LPC3180 only supports 512 or 2048 byte pages, not %i", page_size);
- return ERROR_NAND_OPERATION_NOT_SUPPORTED;
- }
-
- /* select MLC controller if none is currently selected */
- if (lpc3180_info->selected_controller == LPC3180_NO_CONTROLLER)
- {
- DEBUG("no LPC3180 NAND flash controller selected, using default 'mlc'");
- lpc3180_info->selected_controller = LPC3180_MLC_CONTROLLER;
- }
-
- if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER)
- {
- u32 mlc_icr_value = 0x0;
- float cycle;
- int twp, twh, trp, treh, trhz, trbwb, tcea;
-
- /* FLASHCLK_CTRL = 0x22 (enable clock for MLC flash controller) */
- target_write_u32(target, 0x400040c8, 0x22);
-
- /* MLC_CEH = 0x0 (Force nCE assert) */
- target_write_u32(target, 0x200b804c, 0x0);
-
- /* MLC_LOCK = 0xa25e (unlock protected registers) */
- target_write_u32(target, 0x200b8044, 0xa25e);
-
- /* MLC_ICR = configuration */
- if (lpc3180_info->sw_write_protection)
- mlc_icr_value |= 0x8;
- if (page_size == 2048)
- mlc_icr_value |= 0x4;
- if (address_cycles == 4)
- mlc_icr_value |= 0x2;
- if (bus_width == 16)
- mlc_icr_value |= 0x1;
- target_write_u32(target, 0x200b8030, mlc_icr_value);
-
- /* calculate NAND controller timings */
- cycle = lpc3180_cycle_time(lpc3180_info);
-
- twp = ((40 / cycle) + 1);
- twh = ((20 / cycle) + 1);
- trp = ((30 / cycle) + 1);
- treh = ((15 / cycle) + 1);
- trhz = ((30 / cycle) + 1);
- trbwb = ((100 / cycle) + 1);
- tcea = ((45 / cycle) + 1);
-
- /* MLC_LOCK = 0xa25e (unlock protected registers) */
- target_write_u32(target, 0x200b8044, 0xa25e);
-
- /* MLC_TIME_REG */
- target_write_u32(target, 0x200b8034, (twp & 0xf) | ((twh & 0xf) << 4) |
- ((trp & 0xf) << 8) | ((treh & 0xf) << 12) | ((trhz & 0x7) << 16) |
- ((trbwb & 0x1f) << 19) | ((tcea & 0x3) << 24));
-
- lpc3180_reset(device);
- }
- else if (lpc3180_info->selected_controller == LPC3180_SLC_CONTROLLER)
- {
- float cycle;
- int r_setup, r_hold, r_width, r_rdy;
- int w_setup, w_hold, w_width, w_rdy;
-
- /* FLASHCLK_CTRL = 0x05 (enable clock for SLC flash controller) */
- target_write_u32(target, 0x400040c8, 0x05);
-
- /* SLC_CFG = 0x (Force nCE assert, ECC enabled, WIDTH = bus_width) */
- target_write_u32(target, 0x20020014, 0x28 | (bus_width == 16) ? 1 : 0);
-
- /* calculate NAND controller timings */
- cycle = lpc3180_cycle_time(lpc3180_info);
-
- r_setup = w_setup = 0;
- r_hold = w_hold = 10 / cycle;
- r_width = 30 / cycle;
- w_width = 40 / cycle;
- r_rdy = w_rdy = 100 / cycle;
-
- /* SLC_TAC: SLC timing arcs register */
- target_write_u32(target, 0x2002002c, (r_setup & 0xf) | ((r_hold & 0xf) << 4) |
- ((r_width & 0xf) << 8) | ((r_rdy & 0xf) << 12) | ((w_setup & 0xf) << 16) |
- ((w_hold & 0xf) << 20) | ((w_width & 0xf) << 24) | ((w_rdy & 0xf) << 28));
-
- lpc3180_reset(device);
- }
-
- return ERROR_OK;
-}
-
-int lpc3180_reset(struct nand_device_s *device)
-{
- lpc3180_nand_controller_t *lpc3180_info = device->controller_priv;
- target_t *target = lpc3180_info->target;
-
- if (target->state != TARGET_HALTED)
- {
- ERROR("target must be halted to use LPC3180 NAND flash controller");
- return ERROR_NAND_OPERATION_FAILED;
- }
-
- if (lpc3180_info->selected_controller == LPC3180_NO_CONTROLLER)
- {
- ERROR("BUG: no LPC3180 NAND flash controller selected");
- return ERROR_NAND_OPERATION_FAILED;
- }
- else if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER)
- {
- /* MLC_CMD = 0xff (reset controller and NAND device) */
- target_write_u32(target, 0x200b8000, 0xff);
-
- if (!lpc3180_controller_ready(device, 100))
- {
- ERROR("LPC3180 NAND controller timed out after reset");
- return ERROR_NAND_OPERATION_TIMEOUT;
- }
- }
- else if (lpc3180_info->selected_controller == LPC3180_SLC_CONTROLLER)
- {
- /* SLC_CTRL = 0x6 (ECC_CLEAR, SW_RESET) */
- target_write_u32(target, 0x20020010, 0x6);
-
- if (!lpc3180_controller_ready(device, 100))
- {
- ERROR("LPC3180 NAND controller timed out after reset");
- return ERROR_NAND_OPERATION_TIMEOUT;
- }
- }
-
- return ERROR_OK;
-}
-
-int lpc3180_command(struct nand_device_s *device, u8 command)
-{
- lpc3180_nand_controller_t *lpc3180_info = device->controller_priv;
- target_t *target = lpc3180_info->target;
-
- if (target->state != TARGET_HALTED)
- {
- ERROR("target must be halted to use LPC3180 NAND flash controller");
- return ERROR_NAND_OPERATION_FAILED;
- }
-
- if (lpc3180_info->selected_controller == LPC3180_NO_CONTROLLER)
- {
- ERROR("BUG: no LPC3180 NAND flash controller selected");
- return ERROR_NAND_OPERATION_FAILED;
- }
- else if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER)
- {
- /* MLC_CMD = command */
- target_write_u32(target, 0x200b8000, command);
- }
- else if (lpc3180_info->selected_controller == LPC3180_SLC_CONTROLLER)
- {
- /* SLC_CMD = command */
- target_write_u32(target, 0x20020008, command);
- }
-
- return ERROR_OK;
-}
-
-int lpc3180_address(struct nand_device_s *device, u8 address)
-{
- lpc3180_nand_controller_t *lpc3180_info = device->controller_priv;
- target_t *target = lpc3180_info->target;
-
- if (target->state != TARGET_HALTED)
- {
- ERROR("target must be halted to use LPC3180 NAND flash controller");
- return ERROR_NAND_OPERATION_FAILED;
- }
-
- if (lpc3180_info->selected_controller == LPC3180_NO_CONTROLLER)
- {
- ERROR("BUG: no LPC3180 NAND flash controller selected");
- return ERROR_NAND_OPERATION_FAILED;
- }
- else if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER)
- {
- /* MLC_ADDR = address */
- target_write_u32(target, 0x200b8004, address);
- }
- else if (lpc3180_info->selected_controller == LPC3180_SLC_CONTROLLER)
- {
- /* SLC_ADDR = address */
- target_write_u32(target, 0x20020004, address);
- }
-
- return ERROR_OK;
-}
-
-int lpc3180_write_data(struct nand_device_s *device, u16 data)
-{
- lpc3180_nand_controller_t *lpc3180_info = device->controller_priv;
- target_t *target = lpc3180_info->target;
-
- if (target->state != TARGET_HALTED)
- {
- ERROR("target must be halted to use LPC3180 NAND flash controller");
- return ERROR_NAND_OPERATION_FAILED;
- }
-
- if (lpc3180_info->selected_controller == LPC3180_NO_CONTROLLER)
- {
- ERROR("BUG: no LPC3180 NAND flash controller selected");
- return ERROR_NAND_OPERATION_FAILED;
- }
- else if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER)
- {
- /* MLC_DATA = data */
- target_write_u32(target, 0x200b0000, data);
- }
- else if (lpc3180_info->selected_controller == LPC3180_SLC_CONTROLLER)
- {
- /* SLC_DATA = data */
- target_write_u32(target, 0x20020000, data);
- }
-
- return ERROR_OK;
-}
-
-int lpc3180_read_data(struct nand_device_s *device, void *data)
-{
- lpc3180_nand_controller_t *lpc3180_info = device->controller_priv;
- target_t *target = lpc3180_info->target;
-
- if (target->state != TARGET_HALTED)
- {
- ERROR("target must be halted to use LPC3180 NAND flash controller");
- return ERROR_NAND_OPERATION_FAILED;
- }
-
- if (lpc3180_info->selected_controller == LPC3180_NO_CONTROLLER)
- {
- ERROR("BUG: no LPC3180 NAND flash controller selected");
- return ERROR_NAND_OPERATION_FAILED;
- }
- else if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER)
- {
- /* data = MLC_DATA, use sized access */
- if (device->bus_width == 8)
- {
- u8 *data8 = data;
- target_read_u8(target, 0x200b0000, data8);
- }
- else if (device->bus_width == 16)
- {
- u16 *data16 = data;
- target_read_u16(target, 0x200b0000, data16);
- }
- else
- {
- ERROR("BUG: bus_width neither 8 nor 16 bit");
- return ERROR_NAND_OPERATION_FAILED;
- }
- }
- else if (lpc3180_info->selected_controller == LPC3180_SLC_CONTROLLER)
- {
- u32 data32;
-
- /* data = SLC_DATA, must use 32-bit access */
- target_read_u32(target, 0x20020000, &data32);
-
- if (device->bus_width == 8)
- {
- u8 *data8 = data;
- *data8 = data32 & 0xff;
- }
- else if (device->bus_width == 16)
- {
- u16 *data16 = data;
- *data16 = data32 & 0xffff;
- }
- else
- {
- ERROR("BUG: bus_width neither 8 nor 16 bit");
- return ERROR_NAND_OPERATION_FAILED;
- }
- }
-
- return ERROR_OK;
-}
-
-int lpc3180_write_page(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size)
-{
- lpc3180_nand_controller_t *lpc3180_info = device->controller_priv;
- target_t *target = lpc3180_info->target;
- int retval;
- u8 status;
-
- if (target->state != TARGET_HALTED)
- {
- ERROR("target must be halted to use LPC3180 NAND flash controller");
- return ERROR_NAND_OPERATION_FAILED;
- }
-
- if (lpc3180_info->selected_controller == LPC3180_NO_CONTROLLER)
- {
- ERROR("BUG: no LPC3180 NAND flash controller selected");
- return ERROR_NAND_OPERATION_FAILED;
- }
- else if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER)
- {
- u8 *page_buffer;
- u8 *oob_buffer;
- int quarter, num_quarters;
-
- if (!data && oob)
- {
- ERROR("LPC3180 MLC controller can't write OOB data only");
- return ERROR_NAND_OPERATION_NOT_SUPPORTED;
- }
-
- if (oob && (oob_size > 6))
- {
- ERROR("LPC3180 MLC controller can't write more than 6 bytes of OOB data");
- return ERROR_NAND_OPERATION_NOT_SUPPORTED;
- }
-
- if (data_size > device->page_size)
- {
- ERROR("data size exceeds page size");
- return ERROR_NAND_OPERATION_NOT_SUPPORTED;
- }
-
- /* MLC_CMD = sequential input */
- target_write_u32(target, 0x200b8000, NAND_CMD_SEQIN);
-
- page_buffer = malloc(512);
- oob_buffer = malloc(6);
-
- if (device->page_size == 512)
- {
- /* MLC_ADDR = 0x0 (one column cycle) */
- target_write_u32(target, 0x200b8004, 0x0);
-
- /* MLC_ADDR = row */
- target_write_u32(target, 0x200b8004, page & 0xff);
- target_write_u32(target, 0x200b8004, (page >> 8) & 0xff);
-
- if (device->address_cycles == 4)
- target_write_u32(target, 0x200b8004, (page >> 16) & 0xff);
- }
- else
- {
- /* MLC_ADDR = 0x0 (two column cycles) */
- target_write_u32(target, 0x200b8004, 0x0);
- target_write_u32(target, 0x200b8004, 0x0);
-
- /* MLC_ADDR = row */
- target_write_u32(target, 0x200b8004, page & 0xff);
- target_write_u32(target, 0x200b8004, (page >> 8) & 0xff);
- }
-
- /* when using the MLC controller, we have to treat a large page device
- * as being made out of four quarters, each the size of a small page device
- */
- num_quarters = (device->page_size == 2048) ? 4 : 1;
-
- for (quarter = 0; quarter < num_quarters; quarter++)
- {
- int thisrun_data_size = (data_size > 512) ? 512 : data_size;
- int thisrun_oob_size = (oob_size > 6) ? 6 : oob_size;
-
- memset(page_buffer, 0xff, 512);
- if (data)
- {
- memcpy(page_buffer, data, thisrun_data_size);
- data_size -= thisrun_data_size;
- data += thisrun_data_size;
- }
-
- memset(oob_buffer, 0xff, (device->page_size == 512) ? 6 : 24);
- if (oob)
- {
- memcpy(page_buffer, oob, thisrun_oob_size);
- oob_size -= thisrun_oob_size;
- oob += thisrun_oob_size;
- }
-
- /* write MLC_ECC_ENC_REG to start encode cycle */
- target_write_u32(target, 0x200b8008, 0x0);
-
- target->type->write_memory(target, 0x200a8000, 4, 128, page_buffer + (quarter * 512));
- target->type->write_memory(target, 0x200a8000, 1, 6, oob_buffer + (quarter * 6));
-
- /* write MLC_ECC_AUTO_ENC_REG to start auto encode */
- target_write_u32(target, 0x200b8010, 0x0);
-
- if (!lpc3180_controller_ready(device, 1000))
- {
- ERROR("timeout while waiting for completion of auto encode cycle");
- return ERROR_NAND_OPERATION_FAILED;
- }
- }
-
- /* MLC_CMD = auto program command */
- target_write_u32(target, 0x200b8000, NAND_CMD_PAGEPROG);
-
- if ((retval = nand_read_status(device, &status)) != ERROR_OK)
- {
- ERROR("couldn't read status");
- return ERROR_NAND_OPERATION_FAILED;
- }
-
- if (status & NAND_STATUS_FAIL)
- {
- ERROR("write operation didn't pass, status: 0x%2.2x", status);
- return ERROR_NAND_OPERATION_FAILED;
- }
-
- free(page_buffer);
- free(oob_buffer);
- }
- else if (lpc3180_info->selected_controller == LPC3180_SLC_CONTROLLER)
- {
- return nand_write_page_raw(device, page, data, data_size, oob, oob_size);
- }
-
- return ERROR_OK;
-}
-
-int lpc3180_read_page(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size)
-{
- lpc3180_nand_controller_t *lpc3180_info = device->controller_priv;
- target_t *target = lpc3180_info->target;
-
- if (target->state != TARGET_HALTED)
- {
- ERROR("target must be halted to use LPC3180 NAND flash controller");
- return ERROR_NAND_OPERATION_FAILED;
- }
-
- if (lpc3180_info->selected_controller == LPC3180_NO_CONTROLLER)
- {
- ERROR("BUG: no LPC3180 NAND flash controller selected");
- return ERROR_NAND_OPERATION_FAILED;
- }
- else if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER)
- {
- u8 *page_buffer;
- u8 *oob_buffer;
- u32 page_bytes_done = 0;
- u32 oob_bytes_done = 0;
- u32 mlc_isr;
-
-#if 0
- if (oob && (oob_size > 6))
- {
- ERROR("LPC3180 MLC controller can't read more than 6 bytes of OOB data");
- return ERROR_NAND_OPERATION_NOT_SUPPORTED;
- }
-#endif
-
- if (data_size > device->page_size)
- {
- ERROR("data size exceeds page size");
- return ERROR_NAND_OPERATION_NOT_SUPPORTED;
- }
-
- if (device->page_size == 2048)
- {
- page_buffer = malloc(2048);
- oob_buffer = malloc(64);
- }
- else
- {
- page_buffer = malloc(512);
- oob_buffer = malloc(16);
- }
-
- if (!data && oob)
- {
- /* MLC_CMD = Read OOB
- * we can use the READOOB command on both small and large page devices,
- * as the controller translates the 0x50 command to a 0x0 with appropriate
- * positioning of the serial buffer read pointer
- */
- target_write_u32(target, 0x200b8000, NAND_CMD_READOOB);
- }
- else
- {
- /* MLC_CMD = Read0 */
- target_write_u32(target, 0x200b8000, NAND_CMD_READ0);
- }
-
- if (device->page_size == 512)
- {
- /* small page device */
- /* MLC_ADDR = 0x0 (one column cycle) */
- target_write_u32(target, 0x200b8004, 0x0);
-
- /* MLC_ADDR = row */
- target_write_u32(target, 0x200b8004, page & 0xff);
- target_write_u32(target, 0x200b8004, (page >> 8) & 0xff);
-
- if (device->address_cycles == 4)
- target_write_u32(target, 0x200b8004, (page >> 16) & 0xff);
- }
- else
- {
- /* large page device */
- /* MLC_ADDR = 0x0 (two column cycles) */
- target_write_u32(target, 0x200b8004, 0x0);
- target_write_u32(target, 0x200b8004, 0x0);
-
- /* MLC_ADDR = row */
- target_write_u32(target, 0x200b8004, page & 0xff);
- target_write_u32(target, 0x200b8004, (page >> 8) & 0xff);
-
- /* MLC_CMD = Read Start */
- target_write_u32(target, 0x200b8000, NAND_CMD_READSTART);
- }
-
- while (page_bytes_done < device->page_size)
- {
- /* MLC_ECC_AUTO_DEC_REG = dummy */
- target_write_u32(target, 0x200b8014, 0xaa55aa55);
-
- if (!lpc3180_controller_ready(device, 1000))
- {
- ERROR("timeout while waiting for completion of auto decode cycle");
- return ERROR_NAND_OPERATION_FAILED;
- }
-
- target_read_u32(target, 0x200b8048, &mlc_isr);
-
- if (mlc_isr & 0x8)
- {
- if (mlc_isr & 0x40)
- {
- ERROR("uncorrectable error detected: 0x%2.2x", mlc_isr);
- return ERROR_NAND_OPERATION_FAILED;
- }
-
- WARNING("%i symbol error detected and corrected", ((mlc_isr & 0x30) >> 4) + 1);
- }
-
- if (data)
- {
- target->type->read_memory(target, 0x200a8000, 4, 128, page_buffer + page_bytes_done);
- }
-
- if (oob)
- {
- target->type->read_memory(target, 0x200a8000, 4, 4, oob_buffer + oob_bytes_done);
- }
-
- page_bytes_done += 512;
- oob_bytes_done += 16;
- }
-
- if (data)
- memcpy(data, page_buffer, data_size);
-
- if (oob)
- memcpy(oob, oob_buffer, oob_size);
-
- free(page_buffer);
- free(oob_buffer);
- }
- else if (lpc3180_info->selected_controller == LPC3180_SLC_CONTROLLER)
- {
- return nand_read_page_raw(device, page, data, data_size, oob, oob_size);
- }
-
- return ERROR_OK;
-}
-
-int lpc3180_controller_ready(struct nand_device_s *device, int timeout)
-{
- lpc3180_nand_controller_t *lpc3180_info = device->controller_priv;
- target_t *target = lpc3180_info->target;
- u8 status = 0x0;
-
- if (target->state != TARGET_HALTED)
- {
- ERROR("target must be halted to use LPC3180 NAND flash controller");
- return ERROR_NAND_OPERATION_FAILED;
- }
-
- do
- {
- if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER)
- {
- /* Read MLC_ISR, wait for controller to become ready */
- target_read_u8(target, 0x200b8048, &status);
-
- if (status & 2)
- return 1;
- }
- else if (lpc3180_info->selected_controller == LPC3180_SLC_CONTROLLER)
- {
- /* we pretend that the SLC controller is always ready */
- return 1;
- }
-
- usleep(1000);
- } while (timeout-- > 0);
-
- return 0;
-}
-
-int lpc3180_nand_ready(struct nand_device_s *device, int timeout)
-{
- lpc3180_nand_controller_t *lpc3180_info = device->controller_priv;
- target_t *target = lpc3180_info->target;
-
- if (target->state != TARGET_HALTED)
- {
- ERROR("target must be halted to use LPC3180 NAND flash controller");
- return ERROR_NAND_OPERATION_FAILED;
- }
-
- do
- {
- if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER)
- {
- u8 status = 0x0;
-
- /* Read MLC_ISR, wait for NAND flash device to become ready */
- target_read_u8(target, 0x200b8048, &status);
-
- if (status & 1)
- return 1;
- }
- else if (lpc3180_info->selected_controller == LPC3180_SLC_CONTROLLER)
- {
- u32 status = 0x0;
-
- /* Read SLC_STAT and check READY bit */
- target_read_u32(target, 0x20020018, &status);
-
- if (status & 1)
- return 1;
- }
-
- usleep(1000);
- } while (timeout-- > 0);
-
- return 0;
-}
-
-int handle_lpc3180_select_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- nand_device_t *device = NULL;
- lpc3180_nand_controller_t *lpc3180_info = NULL;
- char *selected[] =
- {
- "no", "mlc", "slc"
- };
-
- if ((argc < 1) || (argc > 2))
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- device = get_nand_device_by_num(strtoul(args[0], NULL, 0));
- if (!device)
- {
- command_print(cmd_ctx, "nand device '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- lpc3180_info = device->controller_priv;
-
- if (argc == 2)
- {
- if (strcmp(args[1], "mlc") == 0)
- {
- lpc3180_info->selected_controller = LPC3180_MLC_CONTROLLER;
- }
- else if (strcmp(args[1], "slc") == 0)
- {
- lpc3180_info->selected_controller = LPC3180_SLC_CONTROLLER;
- }
- else
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
- }
-
- command_print(cmd_ctx, "%s controller selected", selected[lpc3180_info->selected_controller]);
-
- return ERROR_OK;
-}
+/***************************************************************************
+ * Copyright (C) 2007 by Dominic Rath *
+ * Dominic.Rath@gmx.de *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "lpc3180_nand_controller.h"
+
+#include "replacements.h"
+#include "log.h"
+
+#include <stdlib.h>
+#include <string.h>
+
+#include "nand.h"
+#include "target.h"
+
+int lpc3180_nand_device_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct nand_device_s *device);
+int lpc3180_register_commands(struct command_context_s *cmd_ctx);
+int lpc3180_init(struct nand_device_s *device);
+int lpc3180_reset(struct nand_device_s *device);
+int lpc3180_command(struct nand_device_s *device, u8 command);
+int lpc3180_address(struct nand_device_s *device, u8 address);
+int lpc3180_write_data(struct nand_device_s *device, u16 data);
+int lpc3180_read_data(struct nand_device_s *device, void *data);
+int lpc3180_write_page(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size);
+int lpc3180_read_page(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size);
+int lpc3180_controller_ready(struct nand_device_s *device, int timeout);
+int lpc3180_nand_ready(struct nand_device_s *device, int timeout);
+
+int handle_lpc3180_select_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+
+nand_flash_controller_t lpc3180_nand_controller =
+{
+ .name = "lpc3180",
+ .nand_device_command = lpc3180_nand_device_command,
+ .register_commands = lpc3180_register_commands,
+ .init = lpc3180_init,
+ .reset = lpc3180_reset,
+ .command = lpc3180_command,
+ .address = lpc3180_address,
+ .write_data = lpc3180_write_data,
+ .read_data = lpc3180_read_data,
+ .write_page = lpc3180_write_page,
+ .read_page = lpc3180_read_page,
+ .controller_ready = lpc3180_controller_ready,
+ .nand_ready = lpc3180_nand_ready,
+};
+
+/* nand device lpc3180 <target#> <oscillator_frequency>
+ */
+int lpc3180_nand_device_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct nand_device_s *device)
+{
+ lpc3180_nand_controller_t *lpc3180_info;
+
+ if (argc < 3)
+ {
+ WARNING("incomplete 'lpc3180' nand flash configuration");
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ lpc3180_info = malloc(sizeof(lpc3180_nand_controller_t));
+ device->controller_priv = lpc3180_info;
+
+ lpc3180_info->target = get_target_by_num(strtoul(args[1], NULL, 0));
+ if (!lpc3180_info->target)
+ {
+ ERROR("no target '%s' configured", args[1]);
+ return ERROR_NAND_DEVICE_INVALID;
+ }
+
+ lpc3180_info->osc_freq = strtoul(args[2], NULL, 0);
+ if ((lpc3180_info->osc_freq < 1000) || (lpc3180_info->osc_freq > 20000))
+ {
+ WARNING("LPC3180 oscillator frequency should be between 1000 and 20000 kHz, was %i", lpc3180_info->osc_freq);
+ }
+ lpc3180_info->selected_controller = LPC3180_NO_CONTROLLER;
+ lpc3180_info->sw_write_protection = 0;
+ lpc3180_info->sw_wp_lower_bound = 0x0;
+ lpc3180_info->sw_wp_upper_bound = 0x0;
+
+ return ERROR_OK;
+}
+
+int lpc3180_register_commands(struct command_context_s *cmd_ctx)
+{
+ command_t *lpc3180_cmd = register_command(cmd_ctx, NULL, "lpc3180", NULL, COMMAND_ANY, "commands specific to the LPC3180 NAND flash controllers");
+
+ register_command(cmd_ctx, lpc3180_cmd, "select", handle_lpc3180_select_command, COMMAND_EXEC, "select <'mlc'|'slc'> controller (default is mlc)");
+
+ return ERROR_OK;
+}
+
+int lpc3180_pll(int fclkin, u32 pll_ctrl)
+{
+ int bypass = (pll_ctrl & 0x8000) >> 15;
+ int direct = (pll_ctrl & 0x4000) >> 14;
+ int feedback = (pll_ctrl & 0x2000) >> 13;
+ int p = (1 << ((pll_ctrl & 0x1800) >> 11) * 2);
+ int n = ((pll_ctrl & 0x0600) >> 9) + 1;
+ int m = ((pll_ctrl & 0x01fe) >> 1) + 1;
+ int lock = (pll_ctrl & 0x1);
+
+ if (!lock)
+ WARNING("PLL is not locked");
+
+ if (!bypass && direct) /* direct mode */
+ return (m * fclkin) / n;
+
+ if (bypass && !direct) /* bypass mode */
+ return fclkin / (2 * p);
+
+ if (bypass & direct) /* direct bypass mode */
+ return fclkin;
+
+ if (feedback) /* integer mode */
+ return m * (fclkin / n);
+ else /* non-integer mode */
+ return (m / (2 * p)) * (fclkin / n);
+}
+
+float lpc3180_cycle_time(lpc3180_nand_controller_t *lpc3180_info)
+{
+ target_t *target = lpc3180_info->target;
+ u32 sysclk_ctrl, pwr_ctrl, hclkdiv_ctrl, hclkpll_ctrl;
+ int sysclk;
+ int hclk;
+ int hclk_pll;
+ float cycle;
+
+ /* calculate timings */
+
+ /* determine current SYSCLK (13'MHz or main oscillator) */
+ target_read_u32(target, 0x40004050, &sysclk_ctrl);
+
+ if ((sysclk_ctrl & 1) == 0)
+ sysclk = lpc3180_info->osc_freq;
+ else
+ sysclk = 13000;
+
+ /* determine selected HCLK source */
+ target_read_u32(target, 0x40004044, &pwr_ctrl);
+
+ if ((pwr_ctrl & (1 << 2)) == 0) /* DIRECT RUN mode */
+ {
+ hclk = sysclk;
+ }
+ else
+ {
+ target_read_u32(target, 0x40004058, &hclkpll_ctrl);
+ hclk_pll = lpc3180_pll(sysclk, hclkpll_ctrl);
+
+ target_read_u32(target, 0x40004040, &hclkdiv_ctrl);
+
+ if (pwr_ctrl & (1 << 10)) /* ARM_CLK and HCLK use PERIPH_CLK */
+ {
+ hclk = hclk_pll / (((hclkdiv_ctrl & 0x7c) >> 2) + 1);
+ }
+ else /* HCLK uses HCLK_PLL */
+ {
+ hclk = hclk_pll / (1 << (hclkdiv_ctrl & 0x3));
+ }
+ }
+
+ DEBUG("LPC3180 HCLK currently clocked at %i kHz", hclk);
+
+ cycle = (1.0 / hclk) * 1000000.0;
+
+ return cycle;
+}
+
+int lpc3180_init(struct nand_device_s *device)
+{
+ lpc3180_nand_controller_t *lpc3180_info = device->controller_priv;
+ target_t *target = lpc3180_info->target;
+ int bus_width = (device->bus_width) ? (device->bus_width) : 8;
+ int address_cycles = (device->address_cycles) ? (device->address_cycles) : 3;
+ int page_size = (device->page_size) ? (device->page_size) : 512;
+
+ if (target->state != TARGET_HALTED)
+ {
+ ERROR("target must be halted to use LPC3180 NAND flash controller");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ /* sanitize arguments */
+ if ((bus_width != 8) && (bus_width != 16))
+ {
+ ERROR("LPC3180 only supports 8 or 16 bit bus width, not %i", bus_width);
+ return ERROR_NAND_OPERATION_NOT_SUPPORTED;
+ }
+
+ /* The LPC3180 only brings out 8 bit NAND data bus, but the controller
+ * would support 16 bit, too, so we just warn about this for now
+ */
+ if (bus_width == 16)
+ {
+ WARNING("LPC3180 only supports 8 bit bus width");
+ }
+
+ /* inform calling code about selected bus width */
+ device->bus_width = bus_width;
+
+ if ((address_cycles != 3) && (address_cycles != 4))
+ {
+ ERROR("LPC3180 only supports 3 or 4 address cycles, not %i", address_cycles);
+ return ERROR_NAND_OPERATION_NOT_SUPPORTED;
+ }
+
+ if ((page_size != 512) && (page_size != 2048))
+ {
+ ERROR("LPC3180 only supports 512 or 2048 byte pages, not %i", page_size);
+ return ERROR_NAND_OPERATION_NOT_SUPPORTED;
+ }
+
+ /* select MLC controller if none is currently selected */
+ if (lpc3180_info->selected_controller == LPC3180_NO_CONTROLLER)
+ {
+ DEBUG("no LPC3180 NAND flash controller selected, using default 'mlc'");
+ lpc3180_info->selected_controller = LPC3180_MLC_CONTROLLER;
+ }
+
+ if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER)
+ {
+ u32 mlc_icr_value = 0x0;
+ float cycle;
+ int twp, twh, trp, treh, trhz, trbwb, tcea;
+
+ /* FLASHCLK_CTRL = 0x22 (enable clock for MLC flash controller) */
+ target_write_u32(target, 0x400040c8, 0x22);
+
+ /* MLC_CEH = 0x0 (Force nCE assert) */
+ target_write_u32(target, 0x200b804c, 0x0);
+
+ /* MLC_LOCK = 0xa25e (unlock protected registers) */
+ target_write_u32(target, 0x200b8044, 0xa25e);
+
+ /* MLC_ICR = configuration */
+ if (lpc3180_info->sw_write_protection)
+ mlc_icr_value |= 0x8;
+ if (page_size == 2048)
+ mlc_icr_value |= 0x4;
+ if (address_cycles == 4)
+ mlc_icr_value |= 0x2;
+ if (bus_width == 16)
+ mlc_icr_value |= 0x1;
+ target_write_u32(target, 0x200b8030, mlc_icr_value);
+
+ /* calculate NAND controller timings */
+ cycle = lpc3180_cycle_time(lpc3180_info);
+
+ twp = ((40 / cycle) + 1);
+ twh = ((20 / cycle) + 1);
+ trp = ((30 / cycle) + 1);
+ treh = ((15 / cycle) + 1);
+ trhz = ((30 / cycle) + 1);
+ trbwb = ((100 / cycle) + 1);
+ tcea = ((45 / cycle) + 1);
+
+ /* MLC_LOCK = 0xa25e (unlock protected registers) */
+ target_write_u32(target, 0x200b8044, 0xa25e);
+
+ /* MLC_TIME_REG */
+ target_write_u32(target, 0x200b8034, (twp & 0xf) | ((twh & 0xf) << 4) |
+ ((trp & 0xf) << 8) | ((treh & 0xf) << 12) | ((trhz & 0x7) << 16) |
+ ((trbwb & 0x1f) << 19) | ((tcea & 0x3) << 24));
+
+ lpc3180_reset(device);
+ }
+ else if (lpc3180_info->selected_controller == LPC3180_SLC_CONTROLLER)
+ {
+ float cycle;
+ int r_setup, r_hold, r_width, r_rdy;
+ int w_setup, w_hold, w_width, w_rdy;
+
+ /* FLASHCLK_CTRL = 0x05 (enable clock for SLC flash controller) */
+ target_write_u32(target, 0x400040c8, 0x05);
+
+ /* SLC_CFG = 0x (Force nCE assert, ECC enabled, WIDTH = bus_width) */
+ target_write_u32(target, 0x20020014, 0x28 | (bus_width == 16) ? 1 : 0);
+
+ /* calculate NAND controller timings */
+ cycle = lpc3180_cycle_time(lpc3180_info);
+
+ r_setup = w_setup = 0;
+ r_hold = w_hold = 10 / cycle;
+ r_width = 30 / cycle;
+ w_width = 40 / cycle;
+ r_rdy = w_rdy = 100 / cycle;
+
+ /* SLC_TAC: SLC timing arcs register */
+ target_write_u32(target, 0x2002002c, (r_setup & 0xf) | ((r_hold & 0xf) << 4) |
+ ((r_width & 0xf) << 8) | ((r_rdy & 0xf) << 12) | ((w_setup & 0xf) << 16) |
+ ((w_hold & 0xf) << 20) | ((w_width & 0xf) << 24) | ((w_rdy & 0xf) << 28));
+
+ lpc3180_reset(device);
+ }
+
+ return ERROR_OK;
+}
+
+int lpc3180_reset(struct nand_device_s *device)
+{
+ lpc3180_nand_controller_t *lpc3180_info = device->controller_priv;
+ target_t *target = lpc3180_info->target;
+
+ if (target->state != TARGET_HALTED)
+ {
+ ERROR("target must be halted to use LPC3180 NAND flash controller");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ if (lpc3180_info->selected_controller == LPC3180_NO_CONTROLLER)
+ {
+ ERROR("BUG: no LPC3180 NAND flash controller selected");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+ else if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER)
+ {
+ /* MLC_CMD = 0xff (reset controller and NAND device) */
+ target_write_u32(target, 0x200b8000, 0xff);
+
+ if (!lpc3180_controller_ready(device, 100))
+ {
+ ERROR("LPC3180 NAND controller timed out after reset");
+ return ERROR_NAND_OPERATION_TIMEOUT;
+ }
+ }
+ else if (lpc3180_info->selected_controller == LPC3180_SLC_CONTROLLER)
+ {
+ /* SLC_CTRL = 0x6 (ECC_CLEAR, SW_RESET) */
+ target_write_u32(target, 0x20020010, 0x6);
+
+ if (!lpc3180_controller_ready(device, 100))
+ {
+ ERROR("LPC3180 NAND controller timed out after reset");
+ return ERROR_NAND_OPERATION_TIMEOUT;
+ }
+ }
+
+ return ERROR_OK;
+}
+
+int lpc3180_command(struct nand_device_s *device, u8 command)
+{
+ lpc3180_nand_controller_t *lpc3180_info = device->controller_priv;
+ target_t *target = lpc3180_info->target;
+
+ if (target->state != TARGET_HALTED)
+ {
+ ERROR("target must be halted to use LPC3180 NAND flash controller");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ if (lpc3180_info->selected_controller == LPC3180_NO_CONTROLLER)
+ {
+ ERROR("BUG: no LPC3180 NAND flash controller selected");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+ else if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER)
+ {
+ /* MLC_CMD = command */
+ target_write_u32(target, 0x200b8000, command);
+ }
+ else if (lpc3180_info->selected_controller == LPC3180_SLC_CONTROLLER)
+ {
+ /* SLC_CMD = command */
+ target_write_u32(target, 0x20020008, command);
+ }
+
+ return ERROR_OK;
+}
+
+int lpc3180_address(struct nand_device_s *device, u8 address)
+{
+ lpc3180_nand_controller_t *lpc3180_info = device->controller_priv;
+ target_t *target = lpc3180_info->target;
+
+ if (target->state != TARGET_HALTED)
+ {
+ ERROR("target must be halted to use LPC3180 NAND flash controller");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ if (lpc3180_info->selected_controller == LPC3180_NO_CONTROLLER)
+ {
+ ERROR("BUG: no LPC3180 NAND flash controller selected");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+ else if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER)
+ {
+ /* MLC_ADDR = address */
+ target_write_u32(target, 0x200b8004, address);
+ }
+ else if (lpc3180_info->selected_controller == LPC3180_SLC_CONTROLLER)
+ {
+ /* SLC_ADDR = address */
+ target_write_u32(target, 0x20020004, address);
+ }
+
+ return ERROR_OK;
+}
+
+int lpc3180_write_data(struct nand_device_s *device, u16 data)
+{
+ lpc3180_nand_controller_t *lpc3180_info = device->controller_priv;
+ target_t *target = lpc3180_info->target;
+
+ if (target->state != TARGET_HALTED)
+ {
+ ERROR("target must be halted to use LPC3180 NAND flash controller");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ if (lpc3180_info->selected_controller == LPC3180_NO_CONTROLLER)
+ {
+ ERROR("BUG: no LPC3180 NAND flash controller selected");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+ else if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER)
+ {
+ /* MLC_DATA = data */
+ target_write_u32(target, 0x200b0000, data);
+ }
+ else if (lpc3180_info->selected_controller == LPC3180_SLC_CONTROLLER)
+ {
+ /* SLC_DATA = data */
+ target_write_u32(target, 0x20020000, data);
+ }
+
+ return ERROR_OK;
+}
+
+int lpc3180_read_data(struct nand_device_s *device, void *data)
+{
+ lpc3180_nand_controller_t *lpc3180_info = device->controller_priv;
+ target_t *target = lpc3180_info->target;
+
+ if (target->state != TARGET_HALTED)
+ {
+ ERROR("target must be halted to use LPC3180 NAND flash controller");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ if (lpc3180_info->selected_controller == LPC3180_NO_CONTROLLER)
+ {
+ ERROR("BUG: no LPC3180 NAND flash controller selected");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+ else if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER)
+ {
+ /* data = MLC_DATA, use sized access */
+ if (device->bus_width == 8)
+ {
+ u8 *data8 = data;
+ target_read_u8(target, 0x200b0000, data8);
+ }
+ else if (device->bus_width == 16)
+ {
+ u16 *data16 = data;
+ target_read_u16(target, 0x200b0000, data16);
+ }
+ else
+ {
+ ERROR("BUG: bus_width neither 8 nor 16 bit");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+ }
+ else if (lpc3180_info->selected_controller == LPC3180_SLC_CONTROLLER)
+ {
+ u32 data32;
+
+ /* data = SLC_DATA, must use 32-bit access */
+ target_read_u32(target, 0x20020000, &data32);
+
+ if (device->bus_width == 8)
+ {
+ u8 *data8 = data;
+ *data8 = data32 & 0xff;
+ }
+ else if (device->bus_width == 16)
+ {
+ u16 *data16 = data;
+ *data16 = data32 & 0xffff;
+ }
+ else
+ {
+ ERROR("BUG: bus_width neither 8 nor 16 bit");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+ }
+
+ return ERROR_OK;
+}
+
+int lpc3180_write_page(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size)
+{
+ lpc3180_nand_controller_t *lpc3180_info = device->controller_priv;
+ target_t *target = lpc3180_info->target;
+ int retval;
+ u8 status;
+
+ if (target->state != TARGET_HALTED)
+ {
+ ERROR("target must be halted to use LPC3180 NAND flash controller");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ if (lpc3180_info->selected_controller == LPC3180_NO_CONTROLLER)
+ {
+ ERROR("BUG: no LPC3180 NAND flash controller selected");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+ else if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER)
+ {
+ u8 *page_buffer;
+ u8 *oob_buffer;
+ int quarter, num_quarters;
+
+ if (!data && oob)
+ {
+ ERROR("LPC3180 MLC controller can't write OOB data only");
+ return ERROR_NAND_OPERATION_NOT_SUPPORTED;
+ }
+
+ if (oob && (oob_size > 6))
+ {
+ ERROR("LPC3180 MLC controller can't write more than 6 bytes of OOB data");
+ return ERROR_NAND_OPERATION_NOT_SUPPORTED;
+ }
+
+ if (data_size > device->page_size)
+ {
+ ERROR("data size exceeds page size");
+ return ERROR_NAND_OPERATION_NOT_SUPPORTED;
+ }
+
+ /* MLC_CMD = sequential input */
+ target_write_u32(target, 0x200b8000, NAND_CMD_SEQIN);
+
+ page_buffer = malloc(512);
+ oob_buffer = malloc(6);
+
+ if (device->page_size == 512)
+ {
+ /* MLC_ADDR = 0x0 (one column cycle) */
+ target_write_u32(target, 0x200b8004, 0x0);
+
+ /* MLC_ADDR = row */
+ target_write_u32(target, 0x200b8004, page & 0xff);
+ target_write_u32(target, 0x200b8004, (page >> 8) & 0xff);
+
+ if (device->address_cycles == 4)
+ target_write_u32(target, 0x200b8004, (page >> 16) & 0xff);
+ }
+ else
+ {
+ /* MLC_ADDR = 0x0 (two column cycles) */
+ target_write_u32(target, 0x200b8004, 0x0);
+ target_write_u32(target, 0x200b8004, 0x0);
+
+ /* MLC_ADDR = row */
+ target_write_u32(target, 0x200b8004, page & 0xff);
+ target_write_u32(target, 0x200b8004, (page >> 8) & 0xff);
+ }
+
+ /* when using the MLC controller, we have to treat a large page device
+ * as being made out of four quarters, each the size of a small page device
+ */
+ num_quarters = (device->page_size == 2048) ? 4 : 1;
+
+ for (quarter = 0; quarter < num_quarters; quarter++)
+ {
+ int thisrun_data_size = (data_size > 512) ? 512 : data_size;
+ int thisrun_oob_size = (oob_size > 6) ? 6 : oob_size;
+
+ memset(page_buffer, 0xff, 512);
+ if (data)
+ {
+ memcpy(page_buffer, data, thisrun_data_size);
+ data_size -= thisrun_data_size;
+ data += thisrun_data_size;
+ }
+
+ memset(oob_buffer, 0xff, (device->page_size == 512) ? 6 : 24);
+ if (oob)
+ {
+ memcpy(page_buffer, oob, thisrun_oob_size);
+ oob_size -= thisrun_oob_size;
+ oob += thisrun_oob_size;
+ }
+
+ /* write MLC_ECC_ENC_REG to start encode cycle */
+ target_write_u32(target, 0x200b8008, 0x0);
+
+ target->type->write_memory(target, 0x200a8000, 4, 128, page_buffer + (quarter * 512));
+ target->type->write_memory(target, 0x200a8000, 1, 6, oob_buffer + (quarter * 6));
+
+ /* write MLC_ECC_AUTO_ENC_REG to start auto encode */
+ target_write_u32(target, 0x200b8010, 0x0);
+
+ if (!lpc3180_controller_ready(device, 1000))
+ {
+ ERROR("timeout while waiting for completion of auto encode cycle");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+ }
+
+ /* MLC_CMD = auto program command */
+ target_write_u32(target, 0x200b8000, NAND_CMD_PAGEPROG);
+
+ if ((retval = nand_read_status(device, &status)) != ERROR_OK)
+ {
+ ERROR("couldn't read status");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ if (status & NAND_STATUS_FAIL)
+ {
+ ERROR("write operation didn't pass, status: 0x%2.2x", status);
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ free(page_buffer);
+ free(oob_buffer);
+ }
+ else if (lpc3180_info->selected_controller == LPC3180_SLC_CONTROLLER)
+ {
+ return nand_write_page_raw(device, page, data, data_size, oob, oob_size);
+ }
+
+ return ERROR_OK;
+}
+
+int lpc3180_read_page(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size)
+{
+ lpc3180_nand_controller_t *lpc3180_info = device->controller_priv;
+ target_t *target = lpc3180_info->target;
+
+ if (target->state != TARGET_HALTED)
+ {
+ ERROR("target must be halted to use LPC3180 NAND flash controller");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ if (lpc3180_info->selected_controller == LPC3180_NO_CONTROLLER)
+ {
+ ERROR("BUG: no LPC3180 NAND flash controller selected");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+ else if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER)
+ {
+ u8 *page_buffer;
+ u8 *oob_buffer;
+ u32 page_bytes_done = 0;
+ u32 oob_bytes_done = 0;
+ u32 mlc_isr;
+
+#if 0
+ if (oob && (oob_size > 6))
+ {
+ ERROR("LPC3180 MLC controller can't read more than 6 bytes of OOB data");
+ return ERROR_NAND_OPERATION_NOT_SUPPORTED;
+ }
+#endif
+
+ if (data_size > device->page_size)
+ {
+ ERROR("data size exceeds page size");
+ return ERROR_NAND_OPERATION_NOT_SUPPORTED;
+ }
+
+ if (device->page_size == 2048)
+ {
+ page_buffer = malloc(2048);
+ oob_buffer = malloc(64);
+ }
+ else
+ {
+ page_buffer = malloc(512);
+ oob_buffer = malloc(16);
+ }
+
+ if (!data && oob)
+ {
+ /* MLC_CMD = Read OOB
+ * we can use the READOOB command on both small and large page devices,
+ * as the controller translates the 0x50 command to a 0x0 with appropriate
+ * positioning of the serial buffer read pointer
+ */
+ target_write_u32(target, 0x200b8000, NAND_CMD_READOOB);
+ }
+ else
+ {
+ /* MLC_CMD = Read0 */
+ target_write_u32(target, 0x200b8000, NAND_CMD_READ0);
+ }
+
+ if (device->page_size == 512)
+ {
+ /* small page device */
+ /* MLC_ADDR = 0x0 (one column cycle) */
+ target_write_u32(target, 0x200b8004, 0x0);
+
+ /* MLC_ADDR = row */
+ target_write_u32(target, 0x200b8004, page & 0xff);
+ target_write_u32(target, 0x200b8004, (page >> 8) & 0xff);
+
+ if (device->address_cycles == 4)
+ target_write_u32(target, 0x200b8004, (page >> 16) & 0xff);
+ }
+ else
+ {
+ /* large page device */
+ /* MLC_ADDR = 0x0 (two column cycles) */
+ target_write_u32(target, 0x200b8004, 0x0);
+ target_write_u32(target, 0x200b8004, 0x0);
+
+ /* MLC_ADDR = row */
+ target_write_u32(target, 0x200b8004, page & 0xff);
+ target_write_u32(target, 0x200b8004, (page >> 8) & 0xff);
+
+ /* MLC_CMD = Read Start */
+ target_write_u32(target, 0x200b8000, NAND_CMD_READSTART);
+ }
+
+ while (page_bytes_done < device->page_size)
+ {
+ /* MLC_ECC_AUTO_DEC_REG = dummy */
+ target_write_u32(target, 0x200b8014, 0xaa55aa55);
+
+ if (!lpc3180_controller_ready(device, 1000))
+ {
+ ERROR("timeout while waiting for completion of auto decode cycle");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ target_read_u32(target, 0x200b8048, &mlc_isr);
+
+ if (mlc_isr & 0x8)
+ {
+ if (mlc_isr & 0x40)
+ {
+ ERROR("uncorrectable error detected: 0x%2.2x", mlc_isr);
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ WARNING("%i symbol error detected and corrected", ((mlc_isr & 0x30) >> 4) + 1);
+ }
+
+ if (data)
+ {
+ target->type->read_memory(target, 0x200a8000, 4, 128, page_buffer + page_bytes_done);
+ }
+
+ if (oob)
+ {
+ target->type->read_memory(target, 0x200a8000, 4, 4, oob_buffer + oob_bytes_done);
+ }
+
+ page_bytes_done += 512;
+ oob_bytes_done += 16;
+ }
+
+ if (data)
+ memcpy(data, page_buffer, data_size);
+
+ if (oob)
+ memcpy(oob, oob_buffer, oob_size);
+
+ free(page_buffer);
+ free(oob_buffer);
+ }
+ else if (lpc3180_info->selected_controller == LPC3180_SLC_CONTROLLER)
+ {
+ return nand_read_page_raw(device, page, data, data_size, oob, oob_size);
+ }
+
+ return ERROR_OK;
+}
+
+int lpc3180_controller_ready(struct nand_device_s *device, int timeout)
+{
+ lpc3180_nand_controller_t *lpc3180_info = device->controller_priv;
+ target_t *target = lpc3180_info->target;
+ u8 status = 0x0;
+
+ if (target->state != TARGET_HALTED)
+ {
+ ERROR("target must be halted to use LPC3180 NAND flash controller");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ do
+ {
+ if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER)
+ {
+ /* Read MLC_ISR, wait for controller to become ready */
+ target_read_u8(target, 0x200b8048, &status);
+
+ if (status & 2)
+ return 1;
+ }
+ else if (lpc3180_info->selected_controller == LPC3180_SLC_CONTROLLER)
+ {
+ /* we pretend that the SLC controller is always ready */
+ return 1;
+ }
+
+ usleep(1000);
+ } while (timeout-- > 0);
+
+ return 0;
+}
+
+int lpc3180_nand_ready(struct nand_device_s *device, int timeout)
+{
+ lpc3180_nand_controller_t *lpc3180_info = device->controller_priv;
+ target_t *target = lpc3180_info->target;
+
+ if (target->state != TARGET_HALTED)
+ {
+ ERROR("target must be halted to use LPC3180 NAND flash controller");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ do
+ {
+ if (lpc3180_info->selected_controller == LPC3180_MLC_CONTROLLER)
+ {
+ u8 status = 0x0;
+
+ /* Read MLC_ISR, wait for NAND flash device to become ready */
+ target_read_u8(target, 0x200b8048, &status);
+
+ if (status & 1)
+ return 1;
+ }
+ else if (lpc3180_info->selected_controller == LPC3180_SLC_CONTROLLER)
+ {
+ u32 status = 0x0;
+
+ /* Read SLC_STAT and check READY bit */
+ target_read_u32(target, 0x20020018, &status);
+
+ if (status & 1)
+ return 1;
+ }
+
+ usleep(1000);
+ } while (timeout-- > 0);
+
+ return 0;
+}
+
+int handle_lpc3180_select_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ nand_device_t *device = NULL;
+ lpc3180_nand_controller_t *lpc3180_info = NULL;
+ char *selected[] =
+ {
+ "no", "mlc", "slc"
+ };
+
+ if ((argc < 1) || (argc > 2))
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ device = get_nand_device_by_num(strtoul(args[0], NULL, 0));
+ if (!device)
+ {
+ command_print(cmd_ctx, "nand device '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ lpc3180_info = device->controller_priv;
+
+ if (argc == 2)
+ {
+ if (strcmp(args[1], "mlc") == 0)
+ {
+ lpc3180_info->selected_controller = LPC3180_MLC_CONTROLLER;
+ }
+ else if (strcmp(args[1], "slc") == 0)
+ {
+ lpc3180_info->selected_controller = LPC3180_SLC_CONTROLLER;
+ }
+ else
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+ }
+
+ command_print(cmd_ctx, "%s controller selected", selected[lpc3180_info->selected_controller]);
+
+ return ERROR_OK;
+}
diff --git a/src/flash/nand.c b/src/flash/nand.c
index b3394428..8ce7cf0a 100644
--- a/src/flash/nand.c
+++ b/src/flash/nand.c
@@ -1,1514 +1,1514 @@
-/***************************************************************************
- * Copyright (C) 2007 by Dominic Rath *
- * Dominic.Rath@gmx.de *
- * *
- * partially based on *
- * drivers/mtd/nand_ids.c *
- * *
- * Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de) *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- ***************************************************************************/
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "replacements.h"
-#include "log.h"
-
-#include <stdlib.h>
-#include <string.h>
-#include <inttypes.h>
-
-#include <errno.h>
-
-#include "nand.h"
-#include "flash.h"
-#include "time_support.h"
-#include "fileio.h"
-#include "image.h"
-
-int nand_register_commands(struct command_context_s *cmd_ctx);
-int handle_nand_list_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_nand_probe_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_nand_check_bad_blocks_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_nand_info_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_nand_copy_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_nand_write_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_nand_dump_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_nand_erase_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-
-int handle_nand_raw_access_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-
-int nand_read_page_raw(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size);
-int nand_read_page(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size);
-int nand_read_plain(struct nand_device_s *device, u32 address, u8 *data, u32 data_size);
-
-int nand_write_page_raw(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size);
-int nand_write_page(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size);
-
-/* NAND flash controller
- */
-extern nand_flash_controller_t lpc3180_nand_controller;
-extern nand_flash_controller_t s3c2410_nand_controller;
-extern nand_flash_controller_t s3c2412_nand_controller;
-extern nand_flash_controller_t s3c2440_nand_controller;
-extern nand_flash_controller_t s3c2443_nand_controller;
-
-/* extern nand_flash_controller_t boundary_scan_nand_controller; */
-
-nand_flash_controller_t *nand_flash_controllers[] =
-{
- &lpc3180_nand_controller,
- &s3c2410_nand_controller,
- &s3c2412_nand_controller,
- &s3c2440_nand_controller,
- &s3c2443_nand_controller,
-/* &boundary_scan_nand_controller, */
- NULL
-};
-
-/* configured NAND devices and NAND Flash command handler */
-nand_device_t *nand_devices = NULL;
-static command_t *nand_cmd;
-
-/* Chip ID list
- *
- * Name, ID code, pagesize, chipsize in MegaByte, eraseblock size,
- * options
- *
- * Pagesize; 0, 256, 512
- * 0 get this information from the extended chip ID
- * 256 256 Byte page size
- * 512 512 Byte page size
- */
-nand_info_t nand_flash_ids[] =
-{
- {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0},
- {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0},
- {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0},
- {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0},
- {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
- {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0},
- {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0},
-
- {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0},
- {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0},
- {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
- {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
-
- {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0},
- {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0},
- {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0},
- {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0},
- {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0},
- {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0},
- {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0},
- {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0},
- {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0},
- {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-
- {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0},
-
- {"NAND 64MiB 1,8V 8-bit", 0xA2, 0, 64, 0, LP_OPTIONS},
- {"NAND 64MiB 3,3V 8-bit", 0xF2, 0, 64, 0, LP_OPTIONS},
- {"NAND 64MiB 1,8V 16-bit", 0xB2, 0, 64, 0, LP_OPTIONS16},
- {"NAND 64MiB 3,3V 16-bit", 0xC2, 0, 64, 0, LP_OPTIONS16},
-
- {"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, LP_OPTIONS},
- {"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, LP_OPTIONS},
- {"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, LP_OPTIONS16},
- {"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, LP_OPTIONS16},
-
- {"NAND 256MiB 1,8V 8-bit", 0xAA, 0, 256, 0, LP_OPTIONS},
- {"NAND 256MiB 3,3V 8-bit", 0xDA, 0, 256, 0, LP_OPTIONS},
- {"NAND 256MiB 1,8V 16-bit", 0xBA, 0, 256, 0, LP_OPTIONS16},
- {"NAND 256MiB 3,3V 16-bit", 0xCA, 0, 256, 0, LP_OPTIONS16},
-
- {"NAND 512MiB 1,8V 8-bit", 0xAC, 0, 512, 0, LP_OPTIONS},
- {"NAND 512MiB 3,3V 8-bit", 0xDC, 0, 512, 0, LP_OPTIONS},
- {"NAND 512MiB 1,8V 16-bit", 0xBC, 0, 512, 0, LP_OPTIONS16},
- {"NAND 512MiB 3,3V 16-bit", 0xCC, 0, 512, 0, LP_OPTIONS16},
-
- {"NAND 1GiB 1,8V 8-bit", 0xA3, 0, 1024, 0, LP_OPTIONS},
- {"NAND 1GiB 3,3V 8-bit", 0xD3, 0, 1024, 0, LP_OPTIONS},
- {"NAND 1GiB 1,8V 16-bit", 0xB3, 0, 1024, 0, LP_OPTIONS16},
- {"NAND 1GiB 3,3V 16-bit", 0xC3, 0, 1024, 0, LP_OPTIONS16},
-
- {"NAND 2GiB 1,8V 8-bit", 0xA5, 0, 2048, 0, LP_OPTIONS},
- {"NAND 2GiB 3,3V 8-bit", 0xD5, 0, 2048, 0, LP_OPTIONS},
- {"NAND 2GiB 1,8V 16-bit", 0xB5, 0, 2048, 0, LP_OPTIONS16},
- {"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, LP_OPTIONS16},
-
- {NULL, 0,}
-};
-
-/* Manufacturer ID list
- */
-nand_manufacturer_t nand_manuf_ids[] =
-{
- {0x0, "unknown"},
- {NAND_MFR_TOSHIBA, "Toshiba"},
- {NAND_MFR_SAMSUNG, "Samsung"},
- {NAND_MFR_FUJITSU, "Fujitsu"},
- {NAND_MFR_NATIONAL, "National"},
- {NAND_MFR_RENESAS, "Renesas"},
- {NAND_MFR_STMICRO, "ST Micro"},
- {NAND_MFR_HYNIX, "Hynix"},
- {0x0, NULL},
-};
-
-/* nand device <nand_controller> [controller options]
- */
-int handle_nand_device_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- int i;
- int retval;
-
- if (argc < 1)
- {
- WARNING("incomplete flash device nand configuration");
- return ERROR_FLASH_BANK_INVALID;
- }
-
- for (i = 0; nand_flash_controllers[i]; i++)
- {
- nand_device_t *p, *c;
-
- if (strcmp(args[0], nand_flash_controllers[i]->name) == 0)
- {
- /* register flash specific commands */
- if (nand_flash_controllers[i]->register_commands(cmd_ctx) != ERROR_OK)
- {
- ERROR("couldn't register '%s' commands", args[0]);
- exit(-1);
- }
-
- c = malloc(sizeof(nand_device_t));
-
- c->controller = nand_flash_controllers[i];
- c->controller_priv = NULL;
- c->manufacturer = NULL;
- c->device = NULL;
- c->bus_width = 0;
- c->address_cycles = 0;
- c->page_size = 0;
- c->use_raw = 0;
- c->next = NULL;
-
- if ((retval = nand_flash_controllers[i]->nand_device_command(cmd_ctx, cmd, args, argc, c)) != ERROR_OK)
- {
- ERROR("'%s' driver rejected nand flash", c->controller->name);
- free(c);
- return ERROR_OK;
- }
-
- /* put NAND device in linked list */
- if (nand_devices)
- {
- /* find last flash device */
- for (p = nand_devices; p && p->next; p = p->next);
- if (p)
- p->next = c;
- }
- else
- {
- nand_devices = c;
- }
-
- return ERROR_OK;
- }
- }
-
- /* no valid NAND controller was found (i.e. the configuration option,
- * didn't match one of the compiled-in controllers)
- */
- ERROR("No valid NAND flash controller found (%s)", args[0]);
- ERROR("compiled-in NAND flash controllers:");
- for (i = 0; nand_flash_controllers[i]; i++)
- {
- ERROR("%i: %s", i, nand_flash_controllers[i]->name);
- }
-
- return ERROR_OK;
-}
-
-int nand_register_commands(struct command_context_s *cmd_ctx)
-{
- nand_cmd = register_command(cmd_ctx, NULL, "nand", NULL, COMMAND_ANY, "NAND specific commands");
-
- register_command(cmd_ctx, nand_cmd, "device", handle_nand_device_command, COMMAND_CONFIG, NULL);
-
- return ERROR_OK;
-}
-
-int nand_init(struct command_context_s *cmd_ctx)
-{
- if (nand_devices)
- {
- register_command(cmd_ctx, nand_cmd, "list", handle_nand_list_command, COMMAND_EXEC,
- "list configured NAND flash devices");
- register_command(cmd_ctx, nand_cmd, "info", handle_nand_info_command, COMMAND_EXEC,
- "print info about NAND flash device <num>");
- register_command(cmd_ctx, nand_cmd, "probe", handle_nand_probe_command, COMMAND_EXEC,
- "identify NAND flash device <num>");
- register_command(cmd_ctx, nand_cmd, "check_bad_blocks", handle_nand_check_bad_blocks_command, COMMAND_EXEC,
- "check NAND flash device <num> for bad blocks [<first> <last>]");
- register_command(cmd_ctx, nand_cmd, "erase", handle_nand_erase_command, COMMAND_EXEC,
- "erase blocks on NAND flash device <num> <first> <last>");
- register_command(cmd_ctx, nand_cmd, "copy", handle_nand_copy_command, COMMAND_EXEC,
- "copy from NAND flash device <num> <offset> <length> <ram-address>");
- register_command(cmd_ctx, nand_cmd, "dump", handle_nand_dump_command, COMMAND_EXEC,
- "dump from NAND flash device <num> <filename> <offset> <size> [options]");
- register_command(cmd_ctx, nand_cmd, "write", handle_nand_write_command, COMMAND_EXEC,
- "write to NAND flash device <num> <filename> <offset> [options]");
- register_command(cmd_ctx, nand_cmd, "raw_access", handle_nand_raw_access_command, COMMAND_EXEC,
- "raw access to NAND flash device <num> ['enable'|'disable']");
- }
-
- return ERROR_OK;
-}
-
-nand_device_t *get_nand_device_by_num(int num)
-{
- nand_device_t *p;
- int i = 0;
-
- for (p = nand_devices; p; p = p->next)
- {
- if (i++ == num)
- {
- return p;
- }
- }
-
- return NULL;
-}
-
-int nand_build_bbt(struct nand_device_s *device, int first, int last)
-{
- u32 page = 0x0;
- int i;
- u8 *oob;
-
- oob = malloc(6);
-
- if ((first < 0) || (first >= device->num_blocks))
- first = 0;
-
- if ((last >= device->num_blocks) || (last == -1))
- last = device->num_blocks - 1;
-
- for (i = first; i < last; i++)
- {
- nand_read_page(device, page, NULL, 0, oob, 6);
-
- if (((device->device->options & NAND_BUSWIDTH_16) && ((oob[0] & oob[1]) != 0xff))
- || (((device->page_size == 512) && (oob[5] != 0xff)) ||
- ((device->page_size == 2048) && (oob[0] != 0xff))))
- {
- WARNING("invalid block: %i", i);
- device->blocks[i].is_bad = 1;
- }
- else
- {
- device->blocks[i].is_bad = 0;
- }
-
- page += (device->erase_size / device->page_size);
- }
-
- return ERROR_OK;
-}
-
-int nand_read_status(struct nand_device_s *device, u8 *status)
-{
- if (!device->device)
- return ERROR_NAND_DEVICE_NOT_PROBED;
-
- /* Send read status command */
- device->controller->command(device, NAND_CMD_STATUS);
-
- usleep(1000);
-
- /* read status */
- if (device->device->options & NAND_BUSWIDTH_16)
- {
- u16 data;
- device->controller->read_data(device, &data);
- *status = data & 0xff;
- }
- else
- {
- device->controller->read_data(device, status);
- }
-
- return ERROR_OK;
-}
-
-int nand_probe(struct nand_device_s *device)
-{
- u8 manufacturer_id, device_id;
- u8 id_buff[5];
- int retval;
- int i;
-
- /* clear device data */
- device->device = NULL;
- device->manufacturer = NULL;
-
- /* clear device parameters */
- device->bus_width = 0;
- device->address_cycles = 0;
- device->page_size = 0;
- device->erase_size = 0;
-
- /* initialize controller (device parameters are zero, use controller default) */
- if ((retval = device->controller->init(device) != ERROR_OK))
- {
- switch (retval)
- {
- case ERROR_NAND_OPERATION_FAILED:
- DEBUG("controller initialization failed");
- return ERROR_NAND_OPERATION_FAILED;
- case ERROR_NAND_OPERATION_NOT_SUPPORTED:
- ERROR("BUG: controller reported that it doesn't support default parameters");
- return ERROR_NAND_OPERATION_FAILED;
- default:
- ERROR("BUG: unknown controller initialization failure");
- return ERROR_NAND_OPERATION_FAILED;
- }
- }
-
- device->controller->command(device, NAND_CMD_RESET);
- device->controller->reset(device);
-
- device->controller->command(device, NAND_CMD_READID);
- device->controller->address(device, 0x0);
-
- if (device->bus_width == 8)
- {
- device->controller->read_data(device, &manufacturer_id);
- device->controller->read_data(device, &device_id);
- }
- else
- {
- u16 data_buf;
- device->controller->read_data(device, &data_buf);
- manufacturer_id = data_buf & 0xff;
- device->controller->read_data(device, &data_buf);
- device_id = data_buf & 0xff;
- }
-
- for (i = 0; nand_flash_ids[i].name; i++)
- {
- if (nand_flash_ids[i].id == device_id)
- {
- device->device = &nand_flash_ids[i];
- break;
- }
- }
-
- for (i = 0; nand_manuf_ids[i].name; i++)
- {
- if (nand_manuf_ids[i].id == manufacturer_id)
- {
- device->manufacturer = &nand_manuf_ids[i];
- break;
- }
- }
-
- if (!device->manufacturer)
- {
- device->manufacturer = &nand_manuf_ids[0];
- device->manufacturer->id = manufacturer_id;
- }
-
- if (!device->device)
- {
- ERROR("unknown NAND flash device found, manufacturer id: 0x%2.2x device id: 0x%2.2x",
- manufacturer_id, device_id);
- return ERROR_NAND_OPERATION_FAILED;
- }
-
- DEBUG("found %s (%s)", device->device->name, device->manufacturer->name);
-
- /* initialize device parameters */
-
- /* bus width */
- if (device->device->options & NAND_BUSWIDTH_16)
- device->bus_width = 16;
- else
- device->bus_width = 8;
-
- /* Do we need extended device probe information? */
- if (device->device->page_size == 0 ||
- device->device->erase_size == 0)
- {
- if (device->bus_width == 8)
- {
- device->controller->read_data(device, id_buff+3);
- device->controller->read_data(device, id_buff+4);
- device->controller->read_data(device, id_buff+5);
- }
- else
- {
- u16 data_buf;
-
- device->controller->read_data(device, &data_buf);
- id_buff[3] = data_buf;
-
- device->controller->read_data(device, &data_buf);
- id_buff[4] = data_buf;
-
- device->controller->read_data(device, &data_buf);
- id_buff[5] = data_buf >> 8;
- }
- }
-
- /* page size */
- if (device->device->page_size == 0)
- {
- device->page_size = 1 << (10 + (id_buff[4] & 3));
- }
- else if (device->device->page_size == 256)
- {
- ERROR("NAND flashes with 256 byte pagesize are not supported");
- return ERROR_NAND_OPERATION_FAILED;
- }
- else
- {
- device->page_size = device->device->page_size;
- }
-
- /* number of address cycles */
- if (device->page_size <= 512)
- {
- /* small page devices */
- if (device->device->chip_size <= 32)
- device->address_cycles = 3;
- else if (device->device->chip_size <= 8*1024)
- device->address_cycles = 4;
- else
- {
- ERROR("BUG: small page NAND device with more than 8 GiB encountered");
- device->address_cycles = 5;
- }
- }
- else
- {
- /* large page devices */
- if (device->device->chip_size <= 128)
- device->address_cycles = 4;
- else if (device->device->chip_size <= 32*1024)
- device->address_cycles = 5;
- else
- {
- ERROR("BUG: small page NAND device with more than 32 GiB encountered");
- device->address_cycles = 6;
- }
- }
-
- /* erase size */
- if (device->device->erase_size == 0)
- {
- switch ((id_buff[4] >> 4) & 3) {
- case 0:
- device->erase_size = 64 << 10;
- break;
- case 1:
- device->erase_size = 128 << 10;
- break;
- case 2:
- device->erase_size = 256 << 10;
- break;
- case 3:
- device->erase_size =512 << 10;
- break;
- }
- }
- else
- {
- device->erase_size = device->device->erase_size;
- }
-
- /* initialize controller, but leave parameters at the controllers default */
- if ((retval = device->controller->init(device) != ERROR_OK))
- {
- switch (retval)
- {
- case ERROR_NAND_OPERATION_FAILED:
- DEBUG("controller initialization failed");
- return ERROR_NAND_OPERATION_FAILED;
- case ERROR_NAND_OPERATION_NOT_SUPPORTED:
- ERROR("controller doesn't support requested parameters (buswidth: %i, address cycles: %i, page size: %i)",
- device->bus_width, device->address_cycles, device->page_size);
- return ERROR_NAND_OPERATION_FAILED;
- default:
- ERROR("BUG: unknown controller initialization failure");
- return ERROR_NAND_OPERATION_FAILED;
- }
- }
-
- device->num_blocks = (device->device->chip_size * 1024) / (device->erase_size / 1024);
- device->blocks = malloc(sizeof(nand_block_t) * device->num_blocks);
-
- for (i = 0; i < device->num_blocks; i++)
- {
- device->blocks[i].size = device->erase_size;
- device->blocks[i].offset = i * device->erase_size;
- device->blocks[i].is_erased = -1;
- device->blocks[i].is_bad = -1;
- }
-
- return ERROR_OK;
-}
-
-int nand_erase(struct nand_device_s *device, int first_block, int last_block)
-{
- int i;
- u32 page;
- u8 status;
- int retval;
-
- if (!device->device)
- return ERROR_NAND_DEVICE_NOT_PROBED;
-
- if ((first_block < 0) || (last_block > device->num_blocks))
- return ERROR_INVALID_ARGUMENTS;
-
- /* make sure we know if a block is bad before erasing it */
- for (i = first_block; i <= last_block; i++)
- {
- if (device->blocks[i].is_bad == -1)
- {
- nand_build_bbt(device, i, last_block);
- break;
- }
- }
-
- for (i = first_block; i <= last_block; i++)
- {
- /* Send erase setup command */
- device->controller->command(device, NAND_CMD_ERASE1);
-
- page = i * (device->erase_size / device->page_size);
-
- /* Send page address */
- if (device->page_size <= 512)
- {
- /* row */
- device->controller->address(device, page & 0xff);
- device->controller->address(device, (page >> 8) & 0xff);
-
- /* 3rd cycle only on devices with more than 32 MiB */
- if (device->address_cycles >= 4)
- device->controller->address(device, (page >> 16) & 0xff);
-
- /* 4th cycle only on devices with more than 8 GiB */
- if (device->address_cycles >= 5)
- device->controller->address(device, (page >> 24) & 0xff);
- }
- else
- {
- /* row */
- device->controller->address(device, page & 0xff);
- device->controller->address(device, (page >> 8) & 0xff);
-
- /* 3rd cycle only on devices with more than 128 MiB */
- if (device->address_cycles >= 5)
- device->controller->address(device, (page >> 16) & 0xff);
- }
-
- /* Send erase confirm command */
- device->controller->command(device, NAND_CMD_ERASE2);
-
- if (!device->controller->nand_ready(device, 1000))
- {
- ERROR("timeout waiting for NAND flash block erase to complete");
- return ERROR_NAND_OPERATION_TIMEOUT;
- }
-
- if ((retval = nand_read_status(device, &status)) != ERROR_OK)
- {
- ERROR("couldn't read status");
- return ERROR_NAND_OPERATION_FAILED;
- }
-
- if (status & 0x1)
- {
- ERROR("erase operation didn't pass, status: 0x%2.2x", status);
- return ERROR_NAND_OPERATION_FAILED;
- }
- }
-
- return ERROR_OK;
-}
-
-int nand_read_plain(struct nand_device_s *device, u32 address, u8 *data, u32 data_size)
-{
- u8 *page;
-
- if (!device->device)
- return ERROR_NAND_DEVICE_NOT_PROBED;
-
- if (address % device->page_size)
- {
- ERROR("reads need to be page aligned");
- return ERROR_NAND_OPERATION_FAILED;
- }
-
- page = malloc(device->page_size);
-
- while (data_size > 0 )
- {
- u32 thisrun_size = (data_size > device->page_size) ? device->page_size : data_size;
- u32 page_address;
-
-
- page_address = address / device->page_size;
-
- nand_read_page(device, page_address, page, device->page_size, NULL, 0);
-
- memcpy(data, page, thisrun_size);
-
- address += thisrun_size;
- data += thisrun_size;
- data_size -= thisrun_size;
- }
-
- free(page);
-
- return ERROR_OK;
-}
-
-int nand_write_plain(struct nand_device_s *device, u32 address, u8 *data, u32 data_size)
-{
- u8 *page;
-
- if (!device->device)
- return ERROR_NAND_DEVICE_NOT_PROBED;
-
- if (address % device->page_size)
- {
- ERROR("writes need to be page aligned");
- return ERROR_NAND_OPERATION_FAILED;
- }
-
- page = malloc(device->page_size);
-
- while (data_size > 0 )
- {
- u32 thisrun_size = (data_size > device->page_size) ? device->page_size : data_size;
- u32 page_address;
-
- memset(page, 0xff, device->page_size);
- memcpy(page, data, thisrun_size);
-
- page_address = address / device->page_size;
-
- nand_write_page(device, page_address, page, device->page_size, NULL, 0);
-
- address += thisrun_size;
- data += thisrun_size;
- data_size -= thisrun_size;
- }
-
- free(page);
-
- return ERROR_OK;
-}
-
-int nand_write_page(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size)
-{
- if (!device->device)
- return ERROR_NAND_DEVICE_NOT_PROBED;
-
- if (device->use_raw || device->controller->write_page == NULL)
- return nand_write_page_raw(device, page, data, data_size, oob, oob_size);
- else
- return device->controller->write_page(device, page, data, data_size, oob, oob_size);
-}
-
-int nand_read_page(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size)
-{
- if (!device->device)
- return ERROR_NAND_DEVICE_NOT_PROBED;
-
- if (device->use_raw || device->controller->read_page == NULL)
- return nand_read_page_raw(device, page, data, data_size, oob, oob_size);
- else
- return device->controller->read_page(device, page, data, data_size, oob, oob_size);
-}
-
-int nand_read_page_raw(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size)
-{
- int i;
-
- if (!device->device)
- return ERROR_NAND_DEVICE_NOT_PROBED;
-
- if (device->page_size <= 512)
- {
- /* small page device */
- if (data)
- device->controller->command(device, NAND_CMD_READ0);
- else
- device->controller->command(device, NAND_CMD_READOOB);
-
- /* column (always 0, we start at the beginning of a page/OOB area) */
- device->controller->address(device, 0x0);
-
- /* row */
- device->controller->address(device, page & 0xff);
- device->controller->address(device, (page >> 8) & 0xff);
-
- /* 4th cycle only on devices with more than 32 MiB */
- if (device->address_cycles >= 4)
- device->controller->address(device, (page >> 16) & 0xff);
-
- /* 5th cycle only on devices with more than 8 GiB */
- if (device->address_cycles >= 5)
- device->controller->address(device, (page >> 24) & 0xff);
- }
- else
- {
- /* large page device */
- device->controller->command(device, NAND_CMD_READ0);
-
- /* column (0 when we start at the beginning of a page,
- * or 2048 for the beginning of OOB area)
- */
- device->controller->address(device, 0x0);
- device->controller->address(device, 0x8);
-
- /* row */
- device->controller->address(device, page & 0xff);
- device->controller->address(device, (page >> 8) & 0xff);
-
- /* 5th cycle only on devices with more than 128 MiB */
- if (device->address_cycles >= 5)
- device->controller->address(device, (page >> 16) & 0xff);
-
- /* large page devices need a start command */
- device->controller->command(device, NAND_CMD_READSTART);
- }
-
- if (!device->controller->nand_ready(device, 100))
- return ERROR_NAND_OPERATION_TIMEOUT;
-
- if (data)
- {
- if (device->controller->read_block_data != NULL)
- (device->controller->read_block_data)(device, data, data_size);
- else
- {
- for (i = 0; i < data_size;)
- {
- if (device->device->options & NAND_BUSWIDTH_16)
- {
- device->controller->read_data(device, data);
- data += 2;
- i += 2;
- }
- else
- {
- device->controller->read_data(device, data);
- data += 1;
- i += 1;
- }
- }
- }
- }
-
- if (oob)
- {
- if (device->controller->read_block_data != NULL)
- (device->controller->read_block_data)(device, oob, oob_size);
- else
- {
- for (i = 0; i < oob_size;)
- {
- if (device->device->options & NAND_BUSWIDTH_16)
- {
- device->controller->read_data(device, oob);
- oob += 2;
- i += 2;
- }
- else
- {
- device->controller->read_data(device, oob);
- oob += 1;
- i += 1;
- }
- }
- }
- }
-
- return ERROR_OK;
-}
-
-int nand_write_page_raw(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size)
-{
- int i;
- int retval;
- u8 status;
-
- if (!device->device)
- return ERROR_NAND_DEVICE_NOT_PROBED;
-
- device->controller->command(device, NAND_CMD_SEQIN);
-
- if (device->page_size <= 512)
- {
- /* column (always 0, we start at the beginning of a page/OOB area) */
- device->controller->address(device, 0x0);
-
- /* row */
- device->controller->address(device, page & 0xff);
- device->controller->address(device, (page >> 8) & 0xff);
-
- /* 4th cycle only on devices with more than 32 MiB */
- if (device->address_cycles >= 4)
- device->controller->address(device, (page >> 16) & 0xff);
-
- /* 5th cycle only on devices with more than 8 GiB */
- if (device->address_cycles >= 5)
- device->controller->address(device, (page >> 24) & 0xff);
- }
- else
- {
- /* column (0 when we start at the beginning of a page,
- * or 2048 for the beginning of OOB area)
- */
- device->controller->address(device, 0x0);
- device->controller->address(device, 0x8);
-
- /* row */
- device->controller->address(device, page & 0xff);
- device->controller->address(device, (page >> 8) & 0xff);
-
- /* 5th cycle only on devices with more than 128 MiB */
- if (device->address_cycles >= 5)
- device->controller->address(device, (page >> 16) & 0xff);
- }
-
- if (data)
- {
- if (device->controller->write_block_data != NULL)
- (device->controller->write_block_data)(device, data, data_size);
- else
- {
- for (i = 0; i < data_size;)
- {
- if (device->device->options & NAND_BUSWIDTH_16)
- {
- u16 data_buf = le_to_h_u16(data);
- device->controller->write_data(device, data_buf);
- data += 2;
- i += 2;
- }
- else
- {
- device->controller->write_data(device, *data);
- data += 1;
- i += 1;
- }
- }
- }
- }
-
- if (oob)
- {
- if (device->controller->write_block_data != NULL)
- (device->controller->write_block_data)(device, oob, oob_size);
- else
- {
- for (i = 0; i < oob_size;)
- {
- if (device->device->options & NAND_BUSWIDTH_16)
- {
- u16 oob_buf = le_to_h_u16(data);
- device->controller->write_data(device, oob_buf);
- oob += 2;
- i += 2;
- }
- else
- {
- device->controller->write_data(device, *oob);
- oob += 1;
- i += 1;
- }
- }
- }
- }
-
- device->controller->command(device, NAND_CMD_PAGEPROG);
-
- if (!device->controller->nand_ready(device, 100))
- return ERROR_NAND_OPERATION_TIMEOUT;
-
- if ((retval = nand_read_status(device, &status)) != ERROR_OK)
- {
- ERROR("couldn't read status");
- return ERROR_NAND_OPERATION_FAILED;
- }
-
- if (status & NAND_STATUS_FAIL)
- {
- ERROR("write operation didn't pass, status: 0x%2.2x", status);
- return ERROR_NAND_OPERATION_FAILED;
- }
-
- return ERROR_OK;
-}
-
-int handle_nand_list_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- nand_device_t *p;
- int i = 0;
-
- if (!nand_devices)
- {
- command_print(cmd_ctx, "no NAND flash devices configured");
- return ERROR_OK;
- }
-
- for (p = nand_devices; p; p = p->next)
- {
- if (p->device)
- command_print(cmd_ctx, "#%i: %s (%s) pagesize: %i, buswidth: %i, erasesize: %i",
- i++, p->device->name, p->manufacturer->name, p->page_size, p->bus_width, p->erase_size);
- else
- command_print(cmd_ctx, "#%i: not probed");
- }
-
- return ERROR_OK;
-}
-
-int handle_nand_info_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- nand_device_t *p;
- int i = 0;
- int j = 0;
- int first = -1;
- int last = -1;
-
- if ((argc < 1) || (argc > 3))
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- }
-
- if (argc == 2)
- {
- first = last = strtoul(args[1], NULL, 0);
- }
- else if (argc == 3)
- {
- first = strtoul(args[1], NULL, 0);
- last = strtoul(args[2], NULL, 0);
- }
-
- p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
- if (p)
- {
- if (p->device)
- {
- if (first >= p->num_blocks)
- first = p->num_blocks - 1;
-
- if (last >= p->num_blocks)
- last = p->num_blocks - 1;
-
- command_print(cmd_ctx, "#%i: %s (%s) pagesize: %i, buswidth: %i, erasesize: %i",
- i++, p->device->name, p->manufacturer->name, p->page_size, p->bus_width, p->erase_size);
-
- for (j = first; j <= last; j++)
- {
- char *erase_state, *bad_state;
-
- if (p->blocks[j].is_erased == 0)
- erase_state = "not erased";
- else if (p->blocks[j].is_erased == 1)
- erase_state = "erased";
- else
- erase_state = "erase state unknown";
-
- if (p->blocks[j].is_bad == 0)
- bad_state = "";
- else if (p->blocks[j].is_bad == 1)
- bad_state = " (marked bad)";
- else
- bad_state = " (block condition unknown)";
-
- command_print(cmd_ctx, "\t#%i: 0x%8.8x (0x%xkB) %s%s",
- j, p->blocks[j].offset, p->blocks[j].size / 1024,
- erase_state, bad_state);
- }
- }
- else
- {
- command_print(cmd_ctx, "#%i: not probed");
- }
- }
-
- return ERROR_OK;
-}
-
-int handle_nand_probe_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- nand_device_t *p;
- int retval;
-
- if (argc != 1)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
- if (p)
- {
- if ((retval = nand_probe(p)) == ERROR_OK)
- {
- command_print(cmd_ctx, "NAND flash device '%s' found", p->device->name);
- }
- else if (retval == ERROR_NAND_OPERATION_FAILED)
- {
- command_print(cmd_ctx, "probing failed for NAND flash device");
- }
- else
- {
- command_print(cmd_ctx, "unknown error when probing NAND flash device");
- }
- }
- else
- {
- command_print(cmd_ctx, "NAND flash device '#%s' is out of bounds", args[0]);
- }
-
- return ERROR_OK;
-}
-
-int handle_nand_erase_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- nand_device_t *p;
- int retval;
-
- if (argc != 3)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- }
-
- p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
- if (p)
- {
- int first = strtoul(args[1], NULL, 0);
- int last = strtoul(args[2], NULL, 0);
-
- if ((retval = nand_erase(p, first, last)) == ERROR_OK)
- {
- command_print(cmd_ctx, "successfully erased blocks %i to %i on NAND flash device '%s'", first, last, p->device->name);
- }
- else if (retval == ERROR_NAND_OPERATION_FAILED)
- {
- command_print(cmd_ctx, "erase failed");
- }
- else
- {
- command_print(cmd_ctx, "unknown error when erasing NAND flash device");
- }
- }
- else
- {
- command_print(cmd_ctx, "NAND flash device '#%s' is out of bounds", args[0]);
- }
-
- return ERROR_OK;
-}
-
-int handle_nand_check_bad_blocks_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- nand_device_t *p;
- int retval;
- int first = -1;
- int last = -1;
-
- if ((argc < 1) || (argc > 3) || (argc == 2))
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- }
-
- if (argc == 3)
- {
- first = strtoul(args[1], NULL, 0);
- last = strtoul(args[2], NULL, 0);
- }
-
- p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
- if (p)
- {
- if ((retval = nand_build_bbt(p, first, last)) == ERROR_OK)
- {
- command_print(cmd_ctx, "checked NAND flash device for bad blocks, use \"nand info\" command to list blocks", p->device->name);
- }
- else if (retval == ERROR_NAND_OPERATION_FAILED)
- {
- command_print(cmd_ctx, "error when checking for bad blocks on NAND flash device");
- }
- else
- {
- command_print(cmd_ctx, "unknown error when checking for bad blocks on NAND flash device");
- }
- }
- else
- {
- command_print(cmd_ctx, "NAND flash device '#%s' is out of bounds", args[0]);
- }
-
- return ERROR_OK;
-}
-
-int handle_nand_copy_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- nand_device_t *p;
-
- if (argc != 4)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- }
-
- p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
- if (p)
- {
-
- }
- else
- {
- command_print(cmd_ctx, "NAND flash device '#%s' is out of bounds", args[0]);
- }
-
- return ERROR_OK;
-}
-
-int handle_nand_write_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- u32 offset;
- u32 binary_size;
- u32 buf_cnt;
- enum oob_formats oob_format = NAND_OOB_NONE;
-
- fileio_t fileio;
-
- duration_t duration;
- char *duration_text;
-
- nand_device_t *p;
-
- if (argc < 3)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- }
-
- p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
- if (p)
- {
- u8 *page = NULL;
- u32 page_size = 0;
- u8 *oob = NULL;
- u32 oob_size = 0;
-
- duration_start_measure(&duration);
- offset = strtoul(args[2], NULL, 0);
-
- if (argc > 3)
- {
- int i;
- for (i = 3; i < argc; i++)
- {
- if (!strcmp(args[i], "oob_raw"))
- oob_format |= NAND_OOB_RAW;
- else if (!strcmp(args[i], "oob_only"))
- oob_format |= NAND_OOB_RAW | NAND_OOB_ONLY;
- else
- {
- command_print(cmd_ctx, "unknown option: %s", args[i]);
- }
- }
- }
-
- if (fileio_open(&fileio, args[1], FILEIO_READ, FILEIO_BINARY) != ERROR_OK)
- {
- command_print(cmd_ctx, "file open error: %s", fileio.error_str);
- return ERROR_OK;
- }
-
- buf_cnt = binary_size = fileio.size;
-
- if (!(oob_format & NAND_OOB_ONLY))
- {
- page_size = p->page_size;
- page = malloc(p->page_size);
- }
-
- if (oob_format & NAND_OOB_RAW)
- {
- if (p->page_size == 512)
- oob_size = 16;
- else if (p->page_size == 2048)
- oob_size = 64;
- oob = malloc(oob_size);
- }
-
- if (offset % p->page_size)
- {
- command_print(cmd_ctx, "only page size aligned offsets and sizes are supported");
- return ERROR_OK;
- }
-
- while (buf_cnt > 0)
- {
- u32 size_read;
-
- if (page)
- {
- fileio_read(&fileio, page_size, page, &size_read);
- buf_cnt -= size_read;
- if (size_read < page_size)
- {
- memset(page + size_read, 0xff, page_size - size_read);
- }
- }
-
- if (oob)
- {
- fileio_read(&fileio, oob_size, oob, &size_read);
- buf_cnt -= size_read;
- if (size_read < oob_size)
- {
- memset(oob + size_read, 0xff, oob_size - size_read);
- }
- }
-
- if (nand_write_page(p, offset / p->page_size, page, page_size, oob, oob_size) != ERROR_OK)
- {
- command_print(cmd_ctx, "failed writing file %s to NAND flash %s at offset 0x%8.8x",
- args[1], args[0], offset);
- return ERROR_OK;
- }
- offset += page_size;
- }
-
- fileio_close(&fileio);
-
- duration_stop_measure(&duration, &duration_text);
- command_print(cmd_ctx, "wrote file %s to NAND flash %s at offset 0x%8.8x in %s",
- args[1], args[0], offset, duration_text);
- free(duration_text);
- }
- else
- {
- command_print(cmd_ctx, "NAND flash device '#%s' is out of bounds", args[0]);
- }
-
- return ERROR_OK;
-}
-
-int handle_nand_dump_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- nand_device_t *p;
-
- if (argc < 4)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
- if (p)
- {
- if (p->device)
- {
- fileio_t fileio;
- duration_t duration;
- char *duration_text;
- int retval;
-
- u8 *page = NULL;
- u32 page_size = 0;
- u8 *oob = NULL;
- u32 oob_size = 0;
- u32 address = strtoul(args[2], NULL, 0);
- u32 size = strtoul(args[3], NULL, 0);
- u32 bytes_done = 0;
- enum oob_formats oob_format = NAND_OOB_NONE;
-
- if (argc > 4)
- {
- int i;
- for (i = 4; i < argc; i++)
- {
- if (!strcmp(args[i], "oob_raw"))
- oob_format |= NAND_OOB_RAW;
- else if (!strcmp(args[i], "oob_only"))
- oob_format |= NAND_OOB_RAW | NAND_OOB_ONLY;
- else
- command_print(cmd_ctx, "unknown option: '%s'", args[i]);
- }
- }
-
- if ((address % p->page_size) || (size % p->page_size))
- {
- command_print(cmd_ctx, "only page size aligned addresses and sizes are supported");
- return ERROR_OK;
- }
-
- if (!(oob_format & NAND_OOB_ONLY))
- {
- page_size = p->page_size;
- page = malloc(p->page_size);
- }
-
- if (oob_format & NAND_OOB_RAW)
- {
- if (p->page_size == 512)
- oob_size = 16;
- else if (p->page_size == 2048)
- oob_size = 64;
- oob = malloc(oob_size);
- }
-
- if (fileio_open(&fileio, args[1], FILEIO_WRITE, FILEIO_BINARY) != ERROR_OK)
- {
- command_print(cmd_ctx, "dump_image error: %s", fileio.error_str);
- return ERROR_OK;
- }
-
- duration_start_measure(&duration);
-
- while (size > 0)
- {
- u32 size_written;
- if ((retval = nand_read_page(p, address / p->page_size, page, page_size, oob, oob_size)) != ERROR_OK)
- {
- command_print(cmd_ctx, "reading NAND flash page failed");
- return ERROR_OK;
- }
-
- if (page)
- {
- fileio_write(&fileio, page_size, page, &size_written);
- bytes_done += page_size;
- }
-
- if (oob)
- {
- fileio_write(&fileio, oob_size, oob, &size_written);
- bytes_done += oob_size;
- }
-
- size -= p->page_size;
- address += p->page_size;
- }
-
- if (page)
- free(page);
-
- if (oob)
- free(oob);
-
- fileio_close(&fileio);
-
- duration_stop_measure(&duration, &duration_text);
- command_print(cmd_ctx, "dumped %"PRIi64" byte in %s", fileio.size, duration_text);
- free(duration_text);
- }
- else
- {
- command_print(cmd_ctx, "#%i: not probed");
- }
- }
- else
- {
- command_print(cmd_ctx, "NAND flash device '#%s' is out of bounds", args[0]);
- }
-
- return ERROR_OK;
-}
-
-int handle_nand_raw_access_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- nand_device_t *p;
-
- if ((argc < 1) || (argc > 2))
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
- if (p)
- {
- if (p->device)
- {
- if (argc == 2)
- {
- if (strcmp("enable", args[1]) == 0)
- {
- p->use_raw = 1;
- }
- else if (strcmp("disable", args[1]) == 0)
- {
- p->use_raw = 0;
- }
- else
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
- }
-
- command_print(cmd_ctx, "raw access is %s", (p->use_raw) ? "enabled" : "disabled");
- }
- else
- {
- command_print(cmd_ctx, "#%i: not probed");
- }
- }
- else
- {
- command_print(cmd_ctx, "NAND flash device '#%s' is out of bounds", args[0]);
- }
-
- return ERROR_OK;
-}
-
+/***************************************************************************
+ * Copyright (C) 2007 by Dominic Rath *
+ * Dominic.Rath@gmx.de *
+ * *
+ * partially based on *
+ * drivers/mtd/nand_ids.c *
+ * *
+ * Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de) *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "replacements.h"
+#include "log.h"
+
+#include <stdlib.h>
+#include <string.h>
+#include <inttypes.h>
+
+#include <errno.h>
+
+#include "nand.h"
+#include "flash.h"
+#include "time_support.h"
+#include "fileio.h"
+#include "image.h"
+
+int nand_register_commands(struct command_context_s *cmd_ctx);
+int handle_nand_list_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int handle_nand_probe_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int handle_nand_check_bad_blocks_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int handle_nand_info_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int handle_nand_copy_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int handle_nand_write_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int handle_nand_dump_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int handle_nand_erase_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+
+int handle_nand_raw_access_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+
+int nand_read_page_raw(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size);
+int nand_read_page(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size);
+int nand_read_plain(struct nand_device_s *device, u32 address, u8 *data, u32 data_size);
+
+int nand_write_page_raw(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size);
+int nand_write_page(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size);
+
+/* NAND flash controller
+ */
+extern nand_flash_controller_t lpc3180_nand_controller;
+extern nand_flash_controller_t s3c2410_nand_controller;
+extern nand_flash_controller_t s3c2412_nand_controller;
+extern nand_flash_controller_t s3c2440_nand_controller;
+extern nand_flash_controller_t s3c2443_nand_controller;
+
+/* extern nand_flash_controller_t boundary_scan_nand_controller; */
+
+nand_flash_controller_t *nand_flash_controllers[] =
+{
+ &lpc3180_nand_controller,
+ &s3c2410_nand_controller,
+ &s3c2412_nand_controller,
+ &s3c2440_nand_controller,
+ &s3c2443_nand_controller,
+/* &boundary_scan_nand_controller, */
+ NULL
+};
+
+/* configured NAND devices and NAND Flash command handler */
+nand_device_t *nand_devices = NULL;
+static command_t *nand_cmd;
+
+/* Chip ID list
+ *
+ * Name, ID code, pagesize, chipsize in MegaByte, eraseblock size,
+ * options
+ *
+ * Pagesize; 0, 256, 512
+ * 0 get this information from the extended chip ID
+ * 256 256 Byte page size
+ * 512 512 Byte page size
+ */
+nand_info_t nand_flash_ids[] =
+{
+ {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0},
+ {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0},
+ {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0},
+ {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0},
+ {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
+ {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0},
+ {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0},
+ {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0},
+ {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0},
+ {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0},
+
+ {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0},
+ {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0},
+ {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+ {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+
+ {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0},
+ {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0},
+ {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
+
+ {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0},
+ {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0},
+ {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
+
+ {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0},
+ {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0},
+ {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
+
+ {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0},
+ {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0},
+ {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0},
+ {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+
+ {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0},
+
+ {"NAND 64MiB 1,8V 8-bit", 0xA2, 0, 64, 0, LP_OPTIONS},
+ {"NAND 64MiB 3,3V 8-bit", 0xF2, 0, 64, 0, LP_OPTIONS},
+ {"NAND 64MiB 1,8V 16-bit", 0xB2, 0, 64, 0, LP_OPTIONS16},
+ {"NAND 64MiB 3,3V 16-bit", 0xC2, 0, 64, 0, LP_OPTIONS16},
+
+ {"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, LP_OPTIONS},
+ {"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, LP_OPTIONS},
+ {"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, LP_OPTIONS16},
+ {"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, LP_OPTIONS16},
+
+ {"NAND 256MiB 1,8V 8-bit", 0xAA, 0, 256, 0, LP_OPTIONS},
+ {"NAND 256MiB 3,3V 8-bit", 0xDA, 0, 256, 0, LP_OPTIONS},
+ {"NAND 256MiB 1,8V 16-bit", 0xBA, 0, 256, 0, LP_OPTIONS16},
+ {"NAND 256MiB 3,3V 16-bit", 0xCA, 0, 256, 0, LP_OPTIONS16},
+
+ {"NAND 512MiB 1,8V 8-bit", 0xAC, 0, 512, 0, LP_OPTIONS},
+ {"NAND 512MiB 3,3V 8-bit", 0xDC, 0, 512, 0, LP_OPTIONS},
+ {"NAND 512MiB 1,8V 16-bit", 0xBC, 0, 512, 0, LP_OPTIONS16},
+ {"NAND 512MiB 3,3V 16-bit", 0xCC, 0, 512, 0, LP_OPTIONS16},
+
+ {"NAND 1GiB 1,8V 8-bit", 0xA3, 0, 1024, 0, LP_OPTIONS},
+ {"NAND 1GiB 3,3V 8-bit", 0xD3, 0, 1024, 0, LP_OPTIONS},
+ {"NAND 1GiB 1,8V 16-bit", 0xB3, 0, 1024, 0, LP_OPTIONS16},
+ {"NAND 1GiB 3,3V 16-bit", 0xC3, 0, 1024, 0, LP_OPTIONS16},
+
+ {"NAND 2GiB 1,8V 8-bit", 0xA5, 0, 2048, 0, LP_OPTIONS},
+ {"NAND 2GiB 3,3V 8-bit", 0xD5, 0, 2048, 0, LP_OPTIONS},
+ {"NAND 2GiB 1,8V 16-bit", 0xB5, 0, 2048, 0, LP_OPTIONS16},
+ {"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, LP_OPTIONS16},
+
+ {NULL, 0,}
+};
+
+/* Manufacturer ID list
+ */
+nand_manufacturer_t nand_manuf_ids[] =
+{
+ {0x0, "unknown"},
+ {NAND_MFR_TOSHIBA, "Toshiba"},
+ {NAND_MFR_SAMSUNG, "Samsung"},
+ {NAND_MFR_FUJITSU, "Fujitsu"},
+ {NAND_MFR_NATIONAL, "National"},
+ {NAND_MFR_RENESAS, "Renesas"},
+ {NAND_MFR_STMICRO, "ST Micro"},
+ {NAND_MFR_HYNIX, "Hynix"},
+ {0x0, NULL},
+};
+
+/* nand device <nand_controller> [controller options]
+ */
+int handle_nand_device_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ int i;
+ int retval;
+
+ if (argc < 1)
+ {
+ WARNING("incomplete flash device nand configuration");
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ for (i = 0; nand_flash_controllers[i]; i++)
+ {
+ nand_device_t *p, *c;
+
+ if (strcmp(args[0], nand_flash_controllers[i]->name) == 0)
+ {
+ /* register flash specific commands */
+ if (nand_flash_controllers[i]->register_commands(cmd_ctx) != ERROR_OK)
+ {
+ ERROR("couldn't register '%s' commands", args[0]);
+ exit(-1);
+ }
+
+ c = malloc(sizeof(nand_device_t));
+
+ c->controller = nand_flash_controllers[i];
+ c->controller_priv = NULL;
+ c->manufacturer = NULL;
+ c->device = NULL;
+ c->bus_width = 0;
+ c->address_cycles = 0;
+ c->page_size = 0;
+ c->use_raw = 0;
+ c->next = NULL;
+
+ if ((retval = nand_flash_controllers[i]->nand_device_command(cmd_ctx, cmd, args, argc, c)) != ERROR_OK)
+ {
+ ERROR("'%s' driver rejected nand flash", c->controller->name);
+ free(c);
+ return ERROR_OK;
+ }
+
+ /* put NAND device in linked list */
+ if (nand_devices)
+ {
+ /* find last flash device */
+ for (p = nand_devices; p && p->next; p = p->next);
+ if (p)
+ p->next = c;
+ }
+ else
+ {
+ nand_devices = c;
+ }
+
+ return ERROR_OK;
+ }
+ }
+
+ /* no valid NAND controller was found (i.e. the configuration option,
+ * didn't match one of the compiled-in controllers)
+ */
+ ERROR("No valid NAND flash controller found (%s)", args[0]);
+ ERROR("compiled-in NAND flash controllers:");
+ for (i = 0; nand_flash_controllers[i]; i++)
+ {
+ ERROR("%i: %s", i, nand_flash_controllers[i]->name);
+ }
+
+ return ERROR_OK;
+}
+
+int nand_register_commands(struct command_context_s *cmd_ctx)
+{
+ nand_cmd = register_command(cmd_ctx, NULL, "nand", NULL, COMMAND_ANY, "NAND specific commands");
+
+ register_command(cmd_ctx, nand_cmd, "device", handle_nand_device_command, COMMAND_CONFIG, NULL);
+
+ return ERROR_OK;
+}
+
+int nand_init(struct command_context_s *cmd_ctx)
+{
+ if (nand_devices)
+ {
+ register_command(cmd_ctx, nand_cmd, "list", handle_nand_list_command, COMMAND_EXEC,
+ "list configured NAND flash devices");
+ register_command(cmd_ctx, nand_cmd, "info", handle_nand_info_command, COMMAND_EXEC,
+ "print info about NAND flash device <num>");
+ register_command(cmd_ctx, nand_cmd, "probe", handle_nand_probe_command, COMMAND_EXEC,
+ "identify NAND flash device <num>");
+ register_command(cmd_ctx, nand_cmd, "check_bad_blocks", handle_nand_check_bad_blocks_command, COMMAND_EXEC,
+ "check NAND flash device <num> for bad blocks [<first> <last>]");
+ register_command(cmd_ctx, nand_cmd, "erase", handle_nand_erase_command, COMMAND_EXEC,
+ "erase blocks on NAND flash device <num> <first> <last>");
+ register_command(cmd_ctx, nand_cmd, "copy", handle_nand_copy_command, COMMAND_EXEC,
+ "copy from NAND flash device <num> <offset> <length> <ram-address>");
+ register_command(cmd_ctx, nand_cmd, "dump", handle_nand_dump_command, COMMAND_EXEC,
+ "dump from NAND flash device <num> <filename> <offset> <size> [options]");
+ register_command(cmd_ctx, nand_cmd, "write", handle_nand_write_command, COMMAND_EXEC,
+ "write to NAND flash device <num> <filename> <offset> [options]");
+ register_command(cmd_ctx, nand_cmd, "raw_access", handle_nand_raw_access_command, COMMAND_EXEC,
+ "raw access to NAND flash device <num> ['enable'|'disable']");
+ }
+
+ return ERROR_OK;
+}
+
+nand_device_t *get_nand_device_by_num(int num)
+{
+ nand_device_t *p;
+ int i = 0;
+
+ for (p = nand_devices; p; p = p->next)
+ {
+ if (i++ == num)
+ {
+ return p;
+ }
+ }
+
+ return NULL;
+}
+
+int nand_build_bbt(struct nand_device_s *device, int first, int last)
+{
+ u32 page = 0x0;
+ int i;
+ u8 *oob;
+
+ oob = malloc(6);
+
+ if ((first < 0) || (first >= device->num_blocks))
+ first = 0;
+
+ if ((last >= device->num_blocks) || (last == -1))
+ last = device->num_blocks - 1;
+
+ for (i = first; i < last; i++)
+ {
+ nand_read_page(device, page, NULL, 0, oob, 6);
+
+ if (((device->device->options & NAND_BUSWIDTH_16) && ((oob[0] & oob[1]) != 0xff))
+ || (((device->page_size == 512) && (oob[5] != 0xff)) ||
+ ((device->page_size == 2048) && (oob[0] != 0xff))))
+ {
+ WARNING("invalid block: %i", i);
+ device->blocks[i].is_bad = 1;
+ }
+ else
+ {
+ device->blocks[i].is_bad = 0;
+ }
+
+ page += (device->erase_size / device->page_size);
+ }
+
+ return ERROR_OK;
+}
+
+int nand_read_status(struct nand_device_s *device, u8 *status)
+{
+ if (!device->device)
+ return ERROR_NAND_DEVICE_NOT_PROBED;
+
+ /* Send read status command */
+ device->controller->command(device, NAND_CMD_STATUS);
+
+ usleep(1000);
+
+ /* read status */
+ if (device->device->options & NAND_BUSWIDTH_16)
+ {
+ u16 data;
+ device->controller->read_data(device, &data);
+ *status = data & 0xff;
+ }
+ else
+ {
+ device->controller->read_data(device, status);
+ }
+
+ return ERROR_OK;
+}
+
+int nand_probe(struct nand_device_s *device)
+{
+ u8 manufacturer_id, device_id;
+ u8 id_buff[5];
+ int retval;
+ int i;
+
+ /* clear device data */
+ device->device = NULL;
+ device->manufacturer = NULL;
+
+ /* clear device parameters */
+ device->bus_width = 0;
+ device->address_cycles = 0;
+ device->page_size = 0;
+ device->erase_size = 0;
+
+ /* initialize controller (device parameters are zero, use controller default) */
+ if ((retval = device->controller->init(device) != ERROR_OK))
+ {
+ switch (retval)
+ {
+ case ERROR_NAND_OPERATION_FAILED:
+ DEBUG("controller initialization failed");
+ return ERROR_NAND_OPERATION_FAILED;
+ case ERROR_NAND_OPERATION_NOT_SUPPORTED:
+ ERROR("BUG: controller reported that it doesn't support default parameters");
+ return ERROR_NAND_OPERATION_FAILED;
+ default:
+ ERROR("BUG: unknown controller initialization failure");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+ }
+
+ device->controller->command(device, NAND_CMD_RESET);
+ device->controller->reset(device);
+
+ device->controller->command(device, NAND_CMD_READID);
+ device->controller->address(device, 0x0);
+
+ if (device->bus_width == 8)
+ {
+ device->controller->read_data(device, &manufacturer_id);
+ device->controller->read_data(device, &device_id);
+ }
+ else
+ {
+ u16 data_buf;
+ device->controller->read_data(device, &data_buf);
+ manufacturer_id = data_buf & 0xff;
+ device->controller->read_data(device, &data_buf);
+ device_id = data_buf & 0xff;
+ }
+
+ for (i = 0; nand_flash_ids[i].name; i++)
+ {
+ if (nand_flash_ids[i].id == device_id)
+ {
+ device->device = &nand_flash_ids[i];
+ break;
+ }
+ }
+
+ for (i = 0; nand_manuf_ids[i].name; i++)
+ {
+ if (nand_manuf_ids[i].id == manufacturer_id)
+ {
+ device->manufacturer = &nand_manuf_ids[i];
+ break;
+ }
+ }
+
+ if (!device->manufacturer)
+ {
+ device->manufacturer = &nand_manuf_ids[0];
+ device->manufacturer->id = manufacturer_id;
+ }
+
+ if (!device->device)
+ {
+ ERROR("unknown NAND flash device found, manufacturer id: 0x%2.2x device id: 0x%2.2x",
+ manufacturer_id, device_id);
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ DEBUG("found %s (%s)", device->device->name, device->manufacturer->name);
+
+ /* initialize device parameters */
+
+ /* bus width */
+ if (device->device->options & NAND_BUSWIDTH_16)
+ device->bus_width = 16;
+ else
+ device->bus_width = 8;
+
+ /* Do we need extended device probe information? */
+ if (device->device->page_size == 0 ||
+ device->device->erase_size == 0)
+ {
+ if (device->bus_width == 8)
+ {
+ device->controller->read_data(device, id_buff+3);
+ device->controller->read_data(device, id_buff+4);
+ device->controller->read_data(device, id_buff+5);
+ }
+ else
+ {
+ u16 data_buf;
+
+ device->controller->read_data(device, &data_buf);
+ id_buff[3] = data_buf;
+
+ device->controller->read_data(device, &data_buf);
+ id_buff[4] = data_buf;
+
+ device->controller->read_data(device, &data_buf);
+ id_buff[5] = data_buf >> 8;
+ }
+ }
+
+ /* page size */
+ if (device->device->page_size == 0)
+ {
+ device->page_size = 1 << (10 + (id_buff[4] & 3));
+ }
+ else if (device->device->page_size == 256)
+ {
+ ERROR("NAND flashes with 256 byte pagesize are not supported");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+ else
+ {
+ device->page_size = device->device->page_size;
+ }
+
+ /* number of address cycles */
+ if (device->page_size <= 512)
+ {
+ /* small page devices */
+ if (device->device->chip_size <= 32)
+ device->address_cycles = 3;
+ else if (device->device->chip_size <= 8*1024)
+ device->address_cycles = 4;
+ else
+ {
+ ERROR("BUG: small page NAND device with more than 8 GiB encountered");
+ device->address_cycles = 5;
+ }
+ }
+ else
+ {
+ /* large page devices */
+ if (device->device->chip_size <= 128)
+ device->address_cycles = 4;
+ else if (device->device->chip_size <= 32*1024)
+ device->address_cycles = 5;
+ else
+ {
+ ERROR("BUG: small page NAND device with more than 32 GiB encountered");
+ device->address_cycles = 6;
+ }
+ }
+
+ /* erase size */
+ if (device->device->erase_size == 0)
+ {
+ switch ((id_buff[4] >> 4) & 3) {
+ case 0:
+ device->erase_size = 64 << 10;
+ break;
+ case 1:
+ device->erase_size = 128 << 10;
+ break;
+ case 2:
+ device->erase_size = 256 << 10;
+ break;
+ case 3:
+ device->erase_size =512 << 10;
+ break;
+ }
+ }
+ else
+ {
+ device->erase_size = device->device->erase_size;
+ }
+
+ /* initialize controller, but leave parameters at the controllers default */
+ if ((retval = device->controller->init(device) != ERROR_OK))
+ {
+ switch (retval)
+ {
+ case ERROR_NAND_OPERATION_FAILED:
+ DEBUG("controller initialization failed");
+ return ERROR_NAND_OPERATION_FAILED;
+ case ERROR_NAND_OPERATION_NOT_SUPPORTED:
+ ERROR("controller doesn't support requested parameters (buswidth: %i, address cycles: %i, page size: %i)",
+ device->bus_width, device->address_cycles, device->page_size);
+ return ERROR_NAND_OPERATION_FAILED;
+ default:
+ ERROR("BUG: unknown controller initialization failure");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+ }
+
+ device->num_blocks = (device->device->chip_size * 1024) / (device->erase_size / 1024);
+ device->blocks = malloc(sizeof(nand_block_t) * device->num_blocks);
+
+ for (i = 0; i < device->num_blocks; i++)
+ {
+ device->blocks[i].size = device->erase_size;
+ device->blocks[i].offset = i * device->erase_size;
+ device->blocks[i].is_erased = -1;
+ device->blocks[i].is_bad = -1;
+ }
+
+ return ERROR_OK;
+}
+
+int nand_erase(struct nand_device_s *device, int first_block, int last_block)
+{
+ int i;
+ u32 page;
+ u8 status;
+ int retval;
+
+ if (!device->device)
+ return ERROR_NAND_DEVICE_NOT_PROBED;
+
+ if ((first_block < 0) || (last_block > device->num_blocks))
+ return ERROR_INVALID_ARGUMENTS;
+
+ /* make sure we know if a block is bad before erasing it */
+ for (i = first_block; i <= last_block; i++)
+ {
+ if (device->blocks[i].is_bad == -1)
+ {
+ nand_build_bbt(device, i, last_block);
+ break;
+ }
+ }
+
+ for (i = first_block; i <= last_block; i++)
+ {
+ /* Send erase setup command */
+ device->controller->command(device, NAND_CMD_ERASE1);
+
+ page = i * (device->erase_size / device->page_size);
+
+ /* Send page address */
+ if (device->page_size <= 512)
+ {
+ /* row */
+ device->controller->address(device, page & 0xff);
+ device->controller->address(device, (page >> 8) & 0xff);
+
+ /* 3rd cycle only on devices with more than 32 MiB */
+ if (device->address_cycles >= 4)
+ device->controller->address(device, (page >> 16) & 0xff);
+
+ /* 4th cycle only on devices with more than 8 GiB */
+ if (device->address_cycles >= 5)
+ device->controller->address(device, (page >> 24) & 0xff);
+ }
+ else
+ {
+ /* row */
+ device->controller->address(device, page & 0xff);
+ device->controller->address(device, (page >> 8) & 0xff);
+
+ /* 3rd cycle only on devices with more than 128 MiB */
+ if (device->address_cycles >= 5)
+ device->controller->address(device, (page >> 16) & 0xff);
+ }
+
+ /* Send erase confirm command */
+ device->controller->command(device, NAND_CMD_ERASE2);
+
+ if (!device->controller->nand_ready(device, 1000))
+ {
+ ERROR("timeout waiting for NAND flash block erase to complete");
+ return ERROR_NAND_OPERATION_TIMEOUT;
+ }
+
+ if ((retval = nand_read_status(device, &status)) != ERROR_OK)
+ {
+ ERROR("couldn't read status");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ if (status & 0x1)
+ {
+ ERROR("erase operation didn't pass, status: 0x%2.2x", status);
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+ }
+
+ return ERROR_OK;
+}
+
+int nand_read_plain(struct nand_device_s *device, u32 address, u8 *data, u32 data_size)
+{
+ u8 *page;
+
+ if (!device->device)
+ return ERROR_NAND_DEVICE_NOT_PROBED;
+
+ if (address % device->page_size)
+ {
+ ERROR("reads need to be page aligned");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ page = malloc(device->page_size);
+
+ while (data_size > 0 )
+ {
+ u32 thisrun_size = (data_size > device->page_size) ? device->page_size : data_size;
+ u32 page_address;
+
+
+ page_address = address / device->page_size;
+
+ nand_read_page(device, page_address, page, device->page_size, NULL, 0);
+
+ memcpy(data, page, thisrun_size);
+
+ address += thisrun_size;
+ data += thisrun_size;
+ data_size -= thisrun_size;
+ }
+
+ free(page);
+
+ return ERROR_OK;
+}
+
+int nand_write_plain(struct nand_device_s *device, u32 address, u8 *data, u32 data_size)
+{
+ u8 *page;
+
+ if (!device->device)
+ return ERROR_NAND_DEVICE_NOT_PROBED;
+
+ if (address % device->page_size)
+ {
+ ERROR("writes need to be page aligned");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ page = malloc(device->page_size);
+
+ while (data_size > 0 )
+ {
+ u32 thisrun_size = (data_size > device->page_size) ? device->page_size : data_size;
+ u32 page_address;
+
+ memset(page, 0xff, device->page_size);
+ memcpy(page, data, thisrun_size);
+
+ page_address = address / device->page_size;
+
+ nand_write_page(device, page_address, page, device->page_size, NULL, 0);
+
+ address += thisrun_size;
+ data += thisrun_size;
+ data_size -= thisrun_size;
+ }
+
+ free(page);
+
+ return ERROR_OK;
+}
+
+int nand_write_page(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size)
+{
+ if (!device->device)
+ return ERROR_NAND_DEVICE_NOT_PROBED;
+
+ if (device->use_raw || device->controller->write_page == NULL)
+ return nand_write_page_raw(device, page, data, data_size, oob, oob_size);
+ else
+ return device->controller->write_page(device, page, data, data_size, oob, oob_size);
+}
+
+int nand_read_page(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size)
+{
+ if (!device->device)
+ return ERROR_NAND_DEVICE_NOT_PROBED;
+
+ if (device->use_raw || device->controller->read_page == NULL)
+ return nand_read_page_raw(device, page, data, data_size, oob, oob_size);
+ else
+ return device->controller->read_page(device, page, data, data_size, oob, oob_size);
+}
+
+int nand_read_page_raw(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size)
+{
+ int i;
+
+ if (!device->device)
+ return ERROR_NAND_DEVICE_NOT_PROBED;
+
+ if (device->page_size <= 512)
+ {
+ /* small page device */
+ if (data)
+ device->controller->command(device, NAND_CMD_READ0);
+ else
+ device->controller->command(device, NAND_CMD_READOOB);
+
+ /* column (always 0, we start at the beginning of a page/OOB area) */
+ device->controller->address(device, 0x0);
+
+ /* row */
+ device->controller->address(device, page & 0xff);
+ device->controller->address(device, (page >> 8) & 0xff);
+
+ /* 4th cycle only on devices with more than 32 MiB */
+ if (device->address_cycles >= 4)
+ device->controller->address(device, (page >> 16) & 0xff);
+
+ /* 5th cycle only on devices with more than 8 GiB */
+ if (device->address_cycles >= 5)
+ device->controller->address(device, (page >> 24) & 0xff);
+ }
+ else
+ {
+ /* large page device */
+ device->controller->command(device, NAND_CMD_READ0);
+
+ /* column (0 when we start at the beginning of a page,
+ * or 2048 for the beginning of OOB area)
+ */
+ device->controller->address(device, 0x0);
+ device->controller->address(device, 0x8);
+
+ /* row */
+ device->controller->address(device, page & 0xff);
+ device->controller->address(device, (page >> 8) & 0xff);
+
+ /* 5th cycle only on devices with more than 128 MiB */
+ if (device->address_cycles >= 5)
+ device->controller->address(device, (page >> 16) & 0xff);
+
+ /* large page devices need a start command */
+ device->controller->command(device, NAND_CMD_READSTART);
+ }
+
+ if (!device->controller->nand_ready(device, 100))
+ return ERROR_NAND_OPERATION_TIMEOUT;
+
+ if (data)
+ {
+ if (device->controller->read_block_data != NULL)
+ (device->controller->read_block_data)(device, data, data_size);
+ else
+ {
+ for (i = 0; i < data_size;)
+ {
+ if (device->device->options & NAND_BUSWIDTH_16)
+ {
+ device->controller->read_data(device, data);
+ data += 2;
+ i += 2;
+ }
+ else
+ {
+ device->controller->read_data(device, data);
+ data += 1;
+ i += 1;
+ }
+ }
+ }
+ }
+
+ if (oob)
+ {
+ if (device->controller->read_block_data != NULL)
+ (device->controller->read_block_data)(device, oob, oob_size);
+ else
+ {
+ for (i = 0; i < oob_size;)
+ {
+ if (device->device->options & NAND_BUSWIDTH_16)
+ {
+ device->controller->read_data(device, oob);
+ oob += 2;
+ i += 2;
+ }
+ else
+ {
+ device->controller->read_data(device, oob);
+ oob += 1;
+ i += 1;
+ }
+ }
+ }
+ }
+
+ return ERROR_OK;
+}
+
+int nand_write_page_raw(struct nand_device_s *device, u32 page, u8 *data, u32 data_size, u8 *oob, u32 oob_size)
+{
+ int i;
+ int retval;
+ u8 status;
+
+ if (!device->device)
+ return ERROR_NAND_DEVICE_NOT_PROBED;
+
+ device->controller->command(device, NAND_CMD_SEQIN);
+
+ if (device->page_size <= 512)
+ {
+ /* column (always 0, we start at the beginning of a page/OOB area) */
+ device->controller->address(device, 0x0);
+
+ /* row */
+ device->controller->address(device, page & 0xff);
+ device->controller->address(device, (page >> 8) & 0xff);
+
+ /* 4th cycle only on devices with more than 32 MiB */
+ if (device->address_cycles >= 4)
+ device->controller->address(device, (page >> 16) & 0xff);
+
+ /* 5th cycle only on devices with more than 8 GiB */
+ if (device->address_cycles >= 5)
+ device->controller->address(device, (page >> 24) & 0xff);
+ }
+ else
+ {
+ /* column (0 when we start at the beginning of a page,
+ * or 2048 for the beginning of OOB area)
+ */
+ device->controller->address(device, 0x0);
+ device->controller->address(device, 0x8);
+
+ /* row */
+ device->controller->address(device, page & 0xff);
+ device->controller->address(device, (page >> 8) & 0xff);
+
+ /* 5th cycle only on devices with more than 128 MiB */
+ if (device->address_cycles >= 5)
+ device->controller->address(device, (page >> 16) & 0xff);
+ }
+
+ if (data)
+ {
+ if (device->controller->write_block_data != NULL)
+ (device->controller->write_block_data)(device, data, data_size);
+ else
+ {
+ for (i = 0; i < data_size;)
+ {
+ if (device->device->options & NAND_BUSWIDTH_16)
+ {
+ u16 data_buf = le_to_h_u16(data);
+ device->controller->write_data(device, data_buf);
+ data += 2;
+ i += 2;
+ }
+ else
+ {
+ device->controller->write_data(device, *data);
+ data += 1;
+ i += 1;
+ }
+ }
+ }
+ }
+
+ if (oob)
+ {
+ if (device->controller->write_block_data != NULL)
+ (device->controller->write_block_data)(device, oob, oob_size);
+ else
+ {
+ for (i = 0; i < oob_size;)
+ {
+ if (device->device->options & NAND_BUSWIDTH_16)
+ {
+ u16 oob_buf = le_to_h_u16(data);
+ device->controller->write_data(device, oob_buf);
+ oob += 2;
+ i += 2;
+ }
+ else
+ {
+ device->controller->write_data(device, *oob);
+ oob += 1;
+ i += 1;
+ }
+ }
+ }
+ }
+
+ device->controller->command(device, NAND_CMD_PAGEPROG);
+
+ if (!device->controller->nand_ready(device, 100))
+ return ERROR_NAND_OPERATION_TIMEOUT;
+
+ if ((retval = nand_read_status(device, &status)) != ERROR_OK)
+ {
+ ERROR("couldn't read status");
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ if (status & NAND_STATUS_FAIL)
+ {
+ ERROR("write operation didn't pass, status: 0x%2.2x", status);
+ return ERROR_NAND_OPERATION_FAILED;
+ }
+
+ return ERROR_OK;
+}
+
+int handle_nand_list_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ nand_device_t *p;
+ int i = 0;
+
+ if (!nand_devices)
+ {
+ command_print(cmd_ctx, "no NAND flash devices configured");
+ return ERROR_OK;
+ }
+
+ for (p = nand_devices; p; p = p->next)
+ {
+ if (p->device)
+ command_print(cmd_ctx, "#%i: %s (%s) pagesize: %i, buswidth: %i, erasesize: %i",
+ i++, p->device->name, p->manufacturer->name, p->page_size, p->bus_width, p->erase_size);
+ else
+ command_print(cmd_ctx, "#%i: not probed");
+ }
+
+ return ERROR_OK;
+}
+
+int handle_nand_info_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ nand_device_t *p;
+ int i = 0;
+ int j = 0;
+ int first = -1;
+ int last = -1;
+
+ if ((argc < 1) || (argc > 3))
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ }
+
+ if (argc == 2)
+ {
+ first = last = strtoul(args[1], NULL, 0);
+ }
+ else if (argc == 3)
+ {
+ first = strtoul(args[1], NULL, 0);
+ last = strtoul(args[2], NULL, 0);
+ }
+
+ p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
+ if (p)
+ {
+ if (p->device)
+ {
+ if (first >= p->num_blocks)
+ first = p->num_blocks - 1;
+
+ if (last >= p->num_blocks)
+ last = p->num_blocks - 1;
+
+ command_print(cmd_ctx, "#%i: %s (%s) pagesize: %i, buswidth: %i, erasesize: %i",
+ i++, p->device->name, p->manufacturer->name, p->page_size, p->bus_width, p->erase_size);
+
+ for (j = first; j <= last; j++)
+ {
+ char *erase_state, *bad_state;
+
+ if (p->blocks[j].is_erased == 0)
+ erase_state = "not erased";
+ else if (p->blocks[j].is_erased == 1)
+ erase_state = "erased";
+ else
+ erase_state = "erase state unknown";
+
+ if (p->blocks[j].is_bad == 0)
+ bad_state = "";
+ else if (p->blocks[j].is_bad == 1)
+ bad_state = " (marked bad)";
+ else
+ bad_state = " (block condition unknown)";
+
+ command_print(cmd_ctx, "\t#%i: 0x%8.8x (0x%xkB) %s%s",
+ j, p->blocks[j].offset, p->blocks[j].size / 1024,
+ erase_state, bad_state);
+ }
+ }
+ else
+ {
+ command_print(cmd_ctx, "#%i: not probed");
+ }
+ }
+
+ return ERROR_OK;
+}
+
+int handle_nand_probe_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ nand_device_t *p;
+ int retval;
+
+ if (argc != 1)
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
+ if (p)
+ {
+ if ((retval = nand_probe(p)) == ERROR_OK)
+ {
+ command_print(cmd_ctx, "NAND flash device '%s' found", p->device->name);
+ }
+ else if (retval == ERROR_NAND_OPERATION_FAILED)
+ {
+ command_print(cmd_ctx, "probing failed for NAND flash device");
+ }
+ else
+ {
+ command_print(cmd_ctx, "unknown error when probing NAND flash device");
+ }
+ }
+ else
+ {
+ command_print(cmd_ctx, "NAND flash device '#%s' is out of bounds", args[0]);
+ }
+
+ return ERROR_OK;
+}
+
+int handle_nand_erase_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ nand_device_t *p;
+ int retval;
+
+ if (argc != 3)
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ }
+
+ p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
+ if (p)
+ {
+ int first = strtoul(args[1], NULL, 0);
+ int last = strtoul(args[2], NULL, 0);
+
+ if ((retval = nand_erase(p, first, last)) == ERROR_OK)
+ {
+ command_print(cmd_ctx, "successfully erased blocks %i to %i on NAND flash device '%s'", first, last, p->device->name);
+ }
+ else if (retval == ERROR_NAND_OPERATION_FAILED)
+ {
+ command_print(cmd_ctx, "erase failed");
+ }
+ else
+ {
+ command_print(cmd_ctx, "unknown error when erasing NAND flash device");
+ }
+ }
+ else
+ {
+ command_print(cmd_ctx, "NAND flash device '#%s' is out of bounds", args[0]);
+ }
+
+ return ERROR_OK;
+}
+
+int handle_nand_check_bad_blocks_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ nand_device_t *p;
+ int retval;
+ int first = -1;
+ int last = -1;
+
+ if ((argc < 1) || (argc > 3) || (argc == 2))
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ }
+
+ if (argc == 3)
+ {
+ first = strtoul(args[1], NULL, 0);
+ last = strtoul(args[2], NULL, 0);
+ }
+
+ p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
+ if (p)
+ {
+ if ((retval = nand_build_bbt(p, first, last)) == ERROR_OK)
+ {
+ command_print(cmd_ctx, "checked NAND flash device for bad blocks, use \"nand info\" command to list blocks", p->device->name);
+ }
+ else if (retval == ERROR_NAND_OPERATION_FAILED)
+ {
+ command_print(cmd_ctx, "error when checking for bad blocks on NAND flash device");
+ }
+ else
+ {
+ command_print(cmd_ctx, "unknown error when checking for bad blocks on NAND flash device");
+ }
+ }
+ else
+ {
+ command_print(cmd_ctx, "NAND flash device '#%s' is out of bounds", args[0]);
+ }
+
+ return ERROR_OK;
+}
+
+int handle_nand_copy_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ nand_device_t *p;
+
+ if (argc != 4)
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ }
+
+ p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
+ if (p)
+ {
+
+ }
+ else
+ {
+ command_print(cmd_ctx, "NAND flash device '#%s' is out of bounds", args[0]);
+ }
+
+ return ERROR_OK;
+}
+
+int handle_nand_write_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ u32 offset;
+ u32 binary_size;
+ u32 buf_cnt;
+ enum oob_formats oob_format = NAND_OOB_NONE;
+
+ fileio_t fileio;
+
+ duration_t duration;
+ char *duration_text;
+
+ nand_device_t *p;
+
+ if (argc < 3)
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ }
+
+ p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
+ if (p)
+ {
+ u8 *page = NULL;
+ u32 page_size = 0;
+ u8 *oob = NULL;
+ u32 oob_size = 0;
+
+ duration_start_measure(&duration);
+ offset = strtoul(args[2], NULL, 0);
+
+ if (argc > 3)
+ {
+ int i;
+ for (i = 3; i < argc; i++)
+ {
+ if (!strcmp(args[i], "oob_raw"))
+ oob_format |= NAND_OOB_RAW;
+ else if (!strcmp(args[i], "oob_only"))
+ oob_format |= NAND_OOB_RAW | NAND_OOB_ONLY;
+ else
+ {
+ command_print(cmd_ctx, "unknown option: %s", args[i]);
+ }
+ }
+ }
+
+ if (fileio_open(&fileio, args[1], FILEIO_READ, FILEIO_BINARY) != ERROR_OK)
+ {
+ command_print(cmd_ctx, "file open error: %s", fileio.error_str);
+ return ERROR_OK;
+ }
+
+ buf_cnt = binary_size = fileio.size;
+
+ if (!(oob_format & NAND_OOB_ONLY))
+ {
+ page_size = p->page_size;
+ page = malloc(p->page_size);
+ }
+
+ if (oob_format & NAND_OOB_RAW)
+ {
+ if (p->page_size == 512)
+ oob_size = 16;
+ else if (p->page_size == 2048)
+ oob_size = 64;
+ oob = malloc(oob_size);
+ }
+
+ if (offset % p->page_size)
+ {
+ command_print(cmd_ctx, "only page size aligned offsets and sizes are supported");
+ return ERROR_OK;
+ }
+
+ while (buf_cnt > 0)
+ {
+ u32 size_read;
+
+ if (page)
+ {
+ fileio_read(&fileio, page_size, page, &size_read);
+ buf_cnt -= size_read;
+ if (size_read < page_size)
+ {
+ memset(page + size_read, 0xff, page_size - size_read);
+ }
+ }
+
+ if (oob)
+ {
+ fileio_read(&fileio, oob_size, oob, &size_read);
+ buf_cnt -= size_read;
+ if (size_read < oob_size)
+ {
+ memset(oob + size_read, 0xff, oob_size - size_read);
+ }
+ }
+
+ if (nand_write_page(p, offset / p->page_size, page, page_size, oob, oob_size) != ERROR_OK)
+ {
+ command_print(cmd_ctx, "failed writing file %s to NAND flash %s at offset 0x%8.8x",
+ args[1], args[0], offset);
+ return ERROR_OK;
+ }
+ offset += page_size;
+ }
+
+ fileio_close(&fileio);
+
+ duration_stop_measure(&duration, &duration_text);
+ command_print(cmd_ctx, "wrote file %s to NAND flash %s at offset 0x%8.8x in %s",
+ args[1], args[0], offset, duration_text);
+ free(duration_text);
+ }
+ else
+ {
+ command_print(cmd_ctx, "NAND flash device '#%s' is out of bounds", args[0]);
+ }
+
+ return ERROR_OK;
+}
+
+int handle_nand_dump_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ nand_device_t *p;
+
+ if (argc < 4)
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
+ if (p)
+ {
+ if (p->device)
+ {
+ fileio_t fileio;
+ duration_t duration;
+ char *duration_text;
+ int retval;
+
+ u8 *page = NULL;
+ u32 page_size = 0;
+ u8 *oob = NULL;
+ u32 oob_size = 0;
+ u32 address = strtoul(args[2], NULL, 0);
+ u32 size = strtoul(args[3], NULL, 0);
+ u32 bytes_done = 0;
+ enum oob_formats oob_format = NAND_OOB_NONE;
+
+ if (argc > 4)
+ {
+ int i;
+ for (i = 4; i < argc; i++)
+ {
+ if (!strcmp(args[i], "oob_raw"))
+ oob_format |= NAND_OOB_RAW;
+ else if (!strcmp(args[i], "oob_only"))
+ oob_format |= NAND_OOB_RAW | NAND_OOB_ONLY;
+ else
+ command_print(cmd_ctx, "unknown option: '%s'", args[i]);
+ }
+ }
+
+ if ((address % p->page_size) || (size % p->page_size))
+ {
+ command_print(cmd_ctx, "only page size aligned addresses and sizes are supported");
+ return ERROR_OK;
+ }
+
+ if (!(oob_format & NAND_OOB_ONLY))
+ {
+ page_size = p->page_size;
+ page = malloc(p->page_size);
+ }
+
+ if (oob_format & NAND_OOB_RAW)
+ {
+ if (p->page_size == 512)
+ oob_size = 16;
+ else if (p->page_size == 2048)
+ oob_size = 64;
+ oob = malloc(oob_size);
+ }
+
+ if (fileio_open(&fileio, args[1], FILEIO_WRITE, FILEIO_BINARY) != ERROR_OK)
+ {
+ command_print(cmd_ctx, "dump_image error: %s", fileio.error_str);
+ return ERROR_OK;
+ }
+
+ duration_start_measure(&duration);
+
+ while (size > 0)
+ {
+ u32 size_written;
+ if ((retval = nand_read_page(p, address / p->page_size, page, page_size, oob, oob_size)) != ERROR_OK)
+ {
+ command_print(cmd_ctx, "reading NAND flash page failed");
+ return ERROR_OK;
+ }
+
+ if (page)
+ {
+ fileio_write(&fileio, page_size, page, &size_written);
+ bytes_done += page_size;
+ }
+
+ if (oob)
+ {
+ fileio_write(&fileio, oob_size, oob, &size_written);
+ bytes_done += oob_size;
+ }
+
+ size -= p->page_size;
+ address += p->page_size;
+ }
+
+ if (page)
+ free(page);
+
+ if (oob)
+ free(oob);
+
+ fileio_close(&fileio);
+
+ duration_stop_measure(&duration, &duration_text);
+ command_print(cmd_ctx, "dumped %"PRIi64" byte in %s", fileio.size, duration_text);
+ free(duration_text);
+ }
+ else
+ {
+ command_print(cmd_ctx, "#%i: not probed");
+ }
+ }
+ else
+ {
+ command_print(cmd_ctx, "NAND flash device '#%s' is out of bounds", args[0]);
+ }
+
+ return ERROR_OK;
+}
+
+int handle_nand_raw_access_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ nand_device_t *p;
+
+ if ((argc < 1) || (argc > 2))
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ p = get_nand_device_by_num(strtoul(args[0], NULL, 0));
+ if (p)
+ {
+ if (p->device)
+ {
+ if (argc == 2)
+ {
+ if (strcmp("enable", args[1]) == 0)
+ {
+ p->use_raw = 1;
+ }
+ else if (strcmp("disable", args[1]) == 0)
+ {
+ p->use_raw = 0;
+ }
+ else
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+ }
+
+ command_print(cmd_ctx, "raw access is %s", (p->use_raw) ? "enabled" : "disabled");
+ }
+ else
+ {
+ command_print(cmd_ctx, "#%i: not probed");
+ }
+ }
+ else
+ {
+ command_print(cmd_ctx, "NAND flash device '#%s' is out of bounds", args[0]);
+ }
+
+ return ERROR_OK;
+}
+
diff --git a/src/flash/stellaris.c b/src/flash/stellaris.c
index 196730b2..d8bd14e0 100644
--- a/src/flash/stellaris.c
+++ b/src/flash/stellaris.c
@@ -1,935 +1,935 @@
-/***************************************************************************
- * Copyright (C) 2006 by Magnus Lundin *
- * lundin@mlu.mine.nu *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- ***************************************************************************/
-
-/***************************************************************************
-* STELLARIS is tested on LM3S811
-*
-*
-*
- ***************************************************************************/
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "replacements.h"
-
-#include "stellaris.h"
-#include "cortex_m3.h"
-
-#include "flash.h"
-#include "target.h"
-#include "log.h"
-#include "binarybuffer.h"
-#include "types.h"
-
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-#define DID0_VER(did0) ((did0>>28)&0x07)
-int stellaris_register_commands(struct command_context_s *cmd_ctx);
-int stellaris_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
-int stellaris_erase(struct flash_bank_s *bank, int first, int last);
-int stellaris_protect(struct flash_bank_s *bank, int set, int first, int last);
-int stellaris_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
-int stellaris_auto_probe(struct flash_bank_s *bank);
-int stellaris_probe(struct flash_bank_s *bank);
-int stellaris_erase_check(struct flash_bank_s *bank);
-int stellaris_protect_check(struct flash_bank_s *bank);
-int stellaris_info(struct flash_bank_s *bank, char *buf, int buf_size);
-
-int stellaris_read_part_info(struct flash_bank_s *bank);
-u32 stellaris_get_flash_status(flash_bank_t *bank);
-void stellaris_set_flash_mode(flash_bank_t *bank,int mode);
-u32 stellaris_wait_status_busy(flash_bank_t *bank, u32 waitbits, int timeout);
-
-int stellaris_read_part_info(struct flash_bank_s *bank);
-
-flash_driver_t stellaris_flash =
-{
- .name = "stellaris",
- .register_commands = stellaris_register_commands,
- .flash_bank_command = stellaris_flash_bank_command,
- .erase = stellaris_erase,
- .protect = stellaris_protect,
- .write = stellaris_write,
- .probe = stellaris_probe,
- .auto_probe = stellaris_auto_probe,
- .erase_check = stellaris_erase_check,
- .protect_check = stellaris_protect_check,
- .info = stellaris_info
-};
-
-
-struct {
- u32 partno;
- char *partname;
-} StellarisParts[] =
-{
- {0x01,"LM3S101"},
- {0x02,"LM3S102"},
- {0x19,"LM3S300"},
- {0x11,"LM3S301"},
- {0x12,"LM3S310"},
- {0x1A,"LM3S308"},
- {0x13,"LM3S315"},
- {0x14,"LM3S316"},
- {0x17,"LM3S317"},
- {0x18,"LM3S318"},
- {0x15,"LM3S328"},
- {0x2A,"LM3S600"},
- {0x21,"LM3S601"},
- {0x2B,"LM3S608"},
- {0x22,"LM3S610"},
- {0x23,"LM3S611"},
- {0x24,"LM3S612"},
- {0x25,"LM3S613"},
- {0x26,"LM3S615"},
- {0x28,"LM3S617"},
- {0x29,"LM3S618"},
- {0x27,"LM3S628"},
- {0x38,"LM3S800"},
- {0x31,"LM3S801"},
- {0x39,"LM3S808"},
- {0x32,"LM3S811"},
- {0x33,"LM3S812"},
- {0x34,"LM3S815"},
- {0x36,"LM3S817"},
- {0x37,"LM3S818"},
- {0x35,"LM3S828"},
- {0x51,"LM3S2110"},
- {0x52,"LM3S2739"},
- {0x53,"LM3S2651"},
- {0x54,"LM3S2939"},
- {0x55,"LM3S2965"},
- {0x56,"LM3S2432"},
- {0x57,"LM3S2620"},
- {0x58,"LM3S2950"},
- {0x59,"LM3S2412"},
- {0x5A,"LM3S2533"},
- {0x61,"LM3S8630"},
- {0x62,"LM3S8970"},
- {0x63,"LM3S8730"},
- {0x64,"LM3S8530"},
- {0x65,"LM3S8930"},
- {0x71,"LM3S6610"},
- {0x72,"LM3S6950"},
- {0x73,"LM3S6965"},
- {0x74,"LM3S6110"},
- {0x75,"LM3S6432"},
- {0x76,"LM3S6537"},
- {0x77,"LM3S6753"},
- {0x78,"LM3S6952"},
- {0x82,"LM3S6422"},
- {0x83,"LM3S6633"},
- {0x84,"LM3S2139"},
- {0x85,"LM3S2637"},
- {0x86,"LM3S8738"},
- {0x88,"LM3S8938"},
- {0x89,"LM3S6938"},
- {0x8B,"LM3S6637"},
- {0x8C,"LM3S8933"},
- {0x8D,"LM3S8733"},
- {0x8E,"LM3S8538"},
- {0x8F,"LM3S2948"},
- {0xA1,"LM3S6100"},
- {0xA2,"LM3S2410"},
- {0xA3,"LM3S6730"},
- {0xA4,"LM3S2730"},
- {0xA5,"LM3S6420"},
- {0xA6,"LM3S8962"},
- {0xB3,"LM3S1635"},
- {0xB4,"LM3S1850"},
- {0xB5,"LM3S1960"},
- {0xB7,"LM3S1937"},
- {0xB8,"LM3S1968"},
- {0xB9,"LM3S1751"},
- {0xBA,"LM3S1439"},
- {0xBB,"LM3S1512"},
- {0xBC,"LM3S1435"},
- {0xBD,"LM3S1637"},
- {0xBE,"LM3S1958"},
- {0xBF,"LM3S1110"},
- {0xC0,"LM3S1620"},
- {0xC1,"LM3S1150"},
- {0xC2,"LM3S1165"},
- {0xC3,"LM3S1133"},
- {0xC4,"LM3S1162"},
- {0xC5,"LM3S1138"},
- {0xC6,"LM3S1332"},
- {0xC7,"LM3S1538"},
- {0xD0,"LM3S6815"},
- {0xD1,"LM3S6816"},
- {0xD2,"LM3S6915"},
- {0xD3,"LM3S6916"},
- {0xD4,"LM3S2016"},
- {0xD5,"LM3S1615"},
- {0xD6,"LM3S1616"},
- {0xD7,"LM3S8971"},
- {0xD8,"LM3S1108"},
- {0xD9,"LM3S1101"},
- {0xDA,"LM3S1608"},
- {0xDB,"LM3S1601"},
- {0xDC,"LM3S1918"},
- {0xDD,"LM3S1911"},
- {0xDE,"LM3S2108"},
- {0xDF,"LM3S2101"},
- {0xE0,"LM3S2608"},
- {0xE1,"LM3S2601"},
- {0xE2,"LM3S2918"},
- {0xE3,"LM3S2911"},
- {0xE4,"LM3S6118"},
- {0xE5,"LM3S6111"},
- {0xE6,"LM3S6618"},
- {0xE7,"LM3S6611"},
- {0xE8,"LM3S6918"},
- {0xE9,"LM3S6911"},
- {0,"Unknown part"}
-};
-
-char * StellarisClassname[2] =
-{
- "Sandstorm",
- "Fury"
-};
-
-/***************************************************************************
-* openocd command interface *
-***************************************************************************/
-
-/* flash_bank stellaris <base> <size> 0 0 <target#>
- */
-int stellaris_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
-{
- stellaris_flash_bank_t *stellaris_info;
-
- if (argc < 6)
- {
- WARNING("incomplete flash_bank stellaris configuration");
- return ERROR_FLASH_BANK_INVALID;
- }
-
- stellaris_info = calloc(sizeof(stellaris_flash_bank_t),1);
- bank->base = 0x0;
- bank->driver_priv = stellaris_info;
-
- stellaris_info->target_name = "Unknown target";
-
- /* part wasn't probed for info yet */
- stellaris_info->did1 = 0;
-
- /* TODO Use an optional main oscillator clock rate in kHz from arg[6] */
- return ERROR_OK;
-}
-
-int stellaris_register_commands(struct command_context_s *cmd_ctx)
-{
-/*
- command_t *stellaris_cmd = register_command(cmd_ctx, NULL, "stellaris", NULL, COMMAND_ANY, NULL);
- register_command(cmd_ctx, stellaris_cmd, "gpnvm", stellaris_handle_gpnvm_command, COMMAND_EXEC,
- "stellaris gpnvm <num> <bit> set|clear, set or clear stellaris gpnvm bit");
-*/
- return ERROR_OK;
-}
-
-int stellaris_info(struct flash_bank_s *bank, char *buf, int buf_size)
-{
- int printed, device_class;
- stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
-
- stellaris_read_part_info(bank);
-
- if (stellaris_info->did1 == 0)
- {
- printed = snprintf(buf, buf_size, "Cannot identify target as a Stellaris\n");
- buf += printed;
- buf_size -= printed;
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- if (DID0_VER(stellaris_info->did0)>0)
- {
- device_class = (stellaris_info->did0>>16)&0xFF;
- }
- else
- {
- device_class = 0;
- }
- printed = snprintf(buf, buf_size, "\nLMI Stellaris information: Chip is class %i(%s) %s v%c.%i\n",
- device_class, StellarisClassname[device_class], stellaris_info->target_name,
- 'A' + (stellaris_info->did0>>8)&0xFF, (stellaris_info->did0)&0xFF);
- buf += printed;
- buf_size -= printed;
-
- printed = snprintf(buf, buf_size, "did1: 0x%8.8x, arch: 0x%4.4x, eproc: %s, ramsize:%ik, flashsize: %ik\n",
- stellaris_info->did1, stellaris_info->did1, "ARMV7M", (1+(stellaris_info->dc0>>16)&0xFFFF)/4, (1+stellaris_info->dc0&0xFFFF)*2);
- buf += printed;
- buf_size -= printed;
-
- printed = snprintf(buf, buf_size, "master clock(estimated): %ikHz, rcc is 0x%x \n", stellaris_info->mck_freq / 1000, stellaris_info->rcc);
- buf += printed;
- buf_size -= printed;
-
- if (stellaris_info->num_lockbits>0) {
- printed = snprintf(buf, buf_size, "pagesize: %i, lockbits: %i 0x%4.4x, pages in lock region: %i \n", stellaris_info->pagesize, stellaris_info->num_lockbits, stellaris_info->lockbits,stellaris_info->num_pages/stellaris_info->num_lockbits);
- buf += printed;
- buf_size -= printed;
- }
- return ERROR_OK;
-}
-
-/***************************************************************************
-* chip identification and status *
-***************************************************************************/
-
-u32 stellaris_get_flash_status(flash_bank_t *bank)
-{
- target_t *target = bank->target;
- u32 fmc;
-
- target_read_u32(target, FLASH_CONTROL_BASE|FLASH_FMC, &fmc);
-
- return fmc;
-}
-
-/** Read clock configuration and set stellaris_info->usec_clocks*/
-
-void stellaris_read_clock_info(flash_bank_t *bank)
-{
- stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
- target_t *target = bank->target;
- u32 rcc, pllcfg, sysdiv, usesysdiv, bypass, oscsrc;
- unsigned long mainfreq;
-
- target_read_u32(target, SCB_BASE|RCC, &rcc);
- DEBUG("Stellaris RCC %x",rcc);
- target_read_u32(target, SCB_BASE|PLLCFG, &pllcfg);
- DEBUG("Stellaris PLLCFG %x",pllcfg);
- stellaris_info->rcc = rcc;
-
- sysdiv = (rcc>>23)&0xF;
- usesysdiv = (rcc>>22)&0x1;
- bypass = (rcc>>11)&0x1;
- oscsrc = (rcc>>4)&0x3;
- /* xtal = (rcc>>6)&0xF; */
- switch (oscsrc)
- {
- case 0:
- mainfreq = 6000000; /* Default xtal */
- break;
- case 1:
- mainfreq = 22500000; /* Internal osc. 15 MHz +- 50% */
- break;
- case 2:
- mainfreq = 5625000; /* Internal osc. / 4 */
- break;
- case 3:
- WARNING("Invalid oscsrc (3) in rcc register");
- mainfreq = 6000000;
- break;
- }
-
- if (!bypass)
- mainfreq = 200000000; /* PLL out frec */
-
- if (usesysdiv)
- stellaris_info->mck_freq = mainfreq/(1+sysdiv);
- else
- stellaris_info->mck_freq = mainfreq;
-
- /* Forget old flash timing */
- stellaris_set_flash_mode(bank,0);
-}
-
-/* Setup the timimg registers */
-void stellaris_set_flash_mode(flash_bank_t *bank,int mode)
-{
- stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
- target_t *target = bank->target;
-
- u32 usecrl = (stellaris_info->mck_freq/1000000ul-1);
- DEBUG("usecrl = %i",usecrl);
- target_write_u32(target, SCB_BASE|USECRL , usecrl);
-
-}
-
-u32 stellaris_wait_status_busy(flash_bank_t *bank, u32 waitbits, int timeout)
-{
- u32 status;
-
- /* Stellaris waits for cmdbit to clear */
- while (((status = stellaris_get_flash_status(bank)) & waitbits) && (timeout-- > 0))
- {
- DEBUG("status: 0x%x", status);
- usleep(1000);
- }
-
- /* Flash errors are reflected in the FLASH_CRIS register */
-
- return status;
-}
-
-
-/* Send one command to the flash controller */
-int stellaris_flash_command(struct flash_bank_s *bank,u8 cmd,u16 pagen)
-{
- u32 fmc;
-// stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
- target_t *target = bank->target;
-
- fmc = FMC_WRKEY | cmd;
- target_write_u32(target, FLASH_CONTROL_BASE|FLASH_FMC, fmc);
- DEBUG("Flash command: 0x%x", fmc);
-
- if (stellaris_wait_status_busy(bank, cmd, 100))
- {
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- return ERROR_OK;
-}
-
-/* Read device id register, main clock frequency register and fill in driver info structure */
-int stellaris_read_part_info(struct flash_bank_s *bank)
-{
- stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
- target_t *target = bank->target;
- u32 did0,did1, ver, fam, status;
- int i;
-
- /* Read and parse chip identification register */
- target_read_u32(target, SCB_BASE|DID0, &did0);
- target_read_u32(target, SCB_BASE|DID1, &did1);
- target_read_u32(target, SCB_BASE|DC0, &stellaris_info->dc0);
- target_read_u32(target, SCB_BASE|DC1, &stellaris_info->dc1);
- DEBUG("did0 0x%x, did1 0x%x, dc0 0x%x, dc1 0x%x",did0, did1, stellaris_info->dc0,stellaris_info->dc1);
-
- ver = did0 >> 28;
- if((ver != 0) && (ver != 1))
- {
- WARNING("Unknown did0 version, cannot identify target");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- ver = did1 >> 28;
- fam = (did1 >> 24) & 0xF;
- if(((ver != 0) && (ver != 1)) || (fam != 0))
- {
- WARNING("Unknown did1 version/family, cannot positively identify target as a Stellaris");
- }
-
- if (did1 == 0)
- {
- WARNING("Cannot identify target as a Stellaris");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- for (i=0;StellarisParts[i].partno;i++)
- {
- if (StellarisParts[i].partno==((did1>>16)&0xFF))
- break;
- }
-
- stellaris_info->target_name = StellarisParts[i].partname;
-
- stellaris_info->did0 = did0;
- stellaris_info->did1 = did1;
-
- stellaris_info->num_lockbits = 1+stellaris_info->dc0&0xFFFF;
- stellaris_info->num_pages = 2*(1+stellaris_info->dc0&0xFFFF);
- stellaris_info->pagesize = 1024;
- bank->size = 1024*stellaris_info->num_pages;
- stellaris_info->pages_in_lockregion = 2;
- target_read_u32(target, SCB_BASE|FMPPE, &stellaris_info->lockbits);
-
- // Read main and master clock freqency register
- stellaris_read_clock_info(bank);
-
- status = stellaris_get_flash_status(bank);
-
- return ERROR_OK;
-}
-
-/***************************************************************************
-* flash operations *
-***************************************************************************/
-
-int stellaris_erase_check(struct flash_bank_s *bank)
-{
- /*
-
- stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
- target_t *target = bank->target;
- int i;
-
- */
-
- return ERROR_OK;
-}
-
-int stellaris_protect_check(struct flash_bank_s *bank)
-{
- u32 status;
-
- stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
-
- if (stellaris_info->did1 == 0)
- {
- stellaris_read_part_info(bank);
- }
-
- if (stellaris_info->did1 == 0)
- {
- WARNING("Cannot identify target as an AT91SAM");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- status = stellaris_get_flash_status(bank);
- stellaris_info->lockbits = status >> 16;
-
- return ERROR_OK;
-}
-
-int stellaris_erase(struct flash_bank_s *bank, int first, int last)
-{
- int banknr;
- u32 flash_fmc, flash_cris;
- stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
- target_t *target = bank->target;
-
- if (stellaris_info->did1 == 0)
- {
- stellaris_read_part_info(bank);
- }
-
- if (stellaris_info->did1 == 0)
- {
- WARNING("Cannot identify target as Stellaris");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- if ((first < 0) || (last < first) || (last >= stellaris_info->num_pages))
- {
- return ERROR_FLASH_SECTOR_INVALID;
- }
-
- /* Configure the flash controller timing */
- stellaris_read_clock_info(bank);
- stellaris_set_flash_mode(bank,0);
-
- /* Clear and disable flash programming interrupts */
- target_write_u32(target, FLASH_CIM, 0);
- target_write_u32(target, FLASH_MISC, PMISC|AMISC);
-
- if ((first == 0) && (last == (stellaris_info->num_pages-1)))
- {
- target_write_u32(target, FLASH_FMA, 0);
- target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_MERASE);
- /* Wait until erase complete */
- do
- {
- target_read_u32(target, FLASH_FMC, &flash_fmc);
- }
- while(flash_fmc & FMC_MERASE);
-
- /* if device has > 128k, then second erase cycle is needed */
- if(stellaris_info->num_pages * stellaris_info->pagesize > 0x20000)
- {
- target_write_u32(target, FLASH_FMA, 0x20000);
- target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_MERASE);
- /* Wait until erase complete */
- do
- {
- target_read_u32(target, FLASH_FMC, &flash_fmc);
- }
- while(flash_fmc & FMC_MERASE);
- }
-
- return ERROR_OK;
- }
-
- for (banknr=first;banknr<=last;banknr++)
- {
- /* Address is first word in page */
- target_write_u32(target, FLASH_FMA, banknr*stellaris_info->pagesize);
- /* Write erase command */
- target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_ERASE);
- /* Wait until erase complete */
- do
- {
- target_read_u32(target, FLASH_FMC, &flash_fmc);
- }
- while(flash_fmc & FMC_ERASE);
-
- /* Check acess violations */
- target_read_u32(target, FLASH_CRIS, &flash_cris);
- if(flash_cris & (AMASK))
- {
- WARNING("Error erasing flash page %i, flash_cris 0x%x", banknr, flash_cris);
- target_write_u32(target, FLASH_CRIS, 0);
- return ERROR_FLASH_OPERATION_FAILED;
- }
- }
-
- return ERROR_OK;
-}
-
-int stellaris_protect(struct flash_bank_s *bank, int set, int first, int last)
-{
- u32 fmppe, flash_fmc, flash_cris;
- int lockregion;
-
- stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
- target_t *target = bank->target;
-
- if (bank->target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if ((first < 0) || (last < first) || (last >= stellaris_info->num_lockbits))
- {
- return ERROR_FLASH_SECTOR_INVALID;
- }
-
- if (stellaris_info->did1 == 0)
- {
- stellaris_read_part_info(bank);
- }
-
- if (stellaris_info->did1 == 0)
- {
- WARNING("Cannot identify target as an Stellaris MCU");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- /* Configure the flash controller timing */
- stellaris_read_clock_info(bank);
- stellaris_set_flash_mode(bank,0);
-
- fmppe = stellaris_info->lockbits;
- for (lockregion=first;lockregion<=last;lockregion++)
- {
- if (set)
- fmppe &= ~(1<<lockregion);
- else
- fmppe |= (1<<lockregion);
- }
-
- /* Clear and disable flash programming interrupts */
- target_write_u32(target, FLASH_CIM, 0);
- target_write_u32(target, FLASH_MISC, PMISC|AMISC);
-
- DEBUG("fmppe 0x%x",fmppe);
- target_write_u32(target, SCB_BASE|FMPPE, fmppe);
- /* Commit FMPPE */
- target_write_u32(target, FLASH_FMA, 1);
- /* Write commit command */
- /* TODO safety check, sice this cannot be undone */
- WARNING("Flash protection cannot be removed once commited, commit is NOT executed !");
- /* target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_COMT); */
- /* Wait until erase complete */
- do
- {
- target_read_u32(target, FLASH_FMC, &flash_fmc);
- }
- while(flash_fmc & FMC_COMT);
-
- /* Check acess violations */
- target_read_u32(target, FLASH_CRIS, &flash_cris);
- if(flash_cris & (AMASK))
- {
- WARNING("Error setting flash page protection, flash_cris 0x%x", flash_cris);
- target_write_u32(target, FLASH_CRIS, 0);
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- target_read_u32(target, SCB_BASE|FMPPE, &stellaris_info->lockbits);
-
- return ERROR_OK;
-}
-
-u8 stellaris_write_code[] =
-{
-/*
- Call with :
- r0 = buffer address
- r1 = destination address
- r2 = bytecount (in) - endaddr (work)
-
- Used registers:
- r3 = pFLASH_CTRL_BASE
- r4 = FLASHWRITECMD
- r5 = #1
- r6 = bytes written
- r7 = temp reg
-*/
- 0x07,0x4B, /* ldr r3,pFLASH_CTRL_BASE */
- 0x08,0x4C, /* ldr r4,FLASHWRITECMD */
- 0x01,0x25, /* movs r5, 1 */
- 0x00,0x26, /* movs r6, #0 */
-/* mainloop: */
- 0x19,0x60, /* str r1, [r3, #0] */
- 0x87,0x59, /* ldr r7, [r0, r6] */
- 0x5F,0x60, /* str r7, [r3, #4] */
- 0x9C,0x60, /* str r4, [r3, #8] */
-/* waitloop: */
- 0x9F,0x68, /* ldr r7, [r3, #8] */
- 0x2F,0x42, /* tst r7, r5 */
- 0xFC,0xD1, /* bne waitloop */
- 0x04,0x31, /* adds r1, r1, #4 */
- 0x04,0x36, /* adds r6, r6, #4 */
- 0x96,0x42, /* cmp r6, r2 */
- 0xF4,0xD1, /* bne mainloop */
- 0x00,0xBE, /* bkpt #0 */
-/* pFLASH_CTRL_BASE: */
- 0x00,0xD0,0x0F,0x40, /* .word 0x400FD000 */
-/* FLASHWRITECMD: */
- 0x01,0x00,0x42,0xA4 /* .word 0xA4420001 */
-};
-
-int stellaris_write_block(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 wcount)
-{
-// stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
- target_t *target = bank->target;
- u32 buffer_size = 8192;
- working_area_t *source;
- working_area_t *write_algorithm;
- u32 address = bank->base + offset;
- reg_param_t reg_params[8];
- armv7m_algorithm_t armv7m_info;
- int retval;
-
- DEBUG("(bank=%08X buffer=%08X offset=%08X wcount=%08X)",
- (unsigned int)bank, (unsigned int)buffer, offset, wcount);
-
- /* flash write code */
- if (target_alloc_working_area(target, sizeof(stellaris_write_code), &write_algorithm) != ERROR_OK)
- {
- WARNING("no working area available, can't do block memory writes");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
-
- target_write_buffer(target, write_algorithm->address, sizeof(stellaris_write_code), stellaris_write_code);
-
- /* memory buffer */
- while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK)
- {
- DEBUG("called target_alloc_working_area(target=%08X buffer_size=%08X source=%08X)",
- (unsigned int)target, buffer_size, (unsigned int)source);
- buffer_size /= 2;
- if (buffer_size <= 256)
- {
- /* if we already allocated the writing code, but failed to get a buffer, free the algorithm */
- if (write_algorithm)
- target_free_working_area(target, write_algorithm);
-
- WARNING("no large enough working area available, can't do block memory writes");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
- };
-
- armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
- armv7m_info.core_mode = ARMV7M_MODE_ANY;
- armv7m_info.core_state = ARMV7M_STATE_THUMB;
-
- init_reg_param(&reg_params[0], "r0", 32, PARAM_OUT);
- init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT);
- init_reg_param(&reg_params[2], "r2", 32, PARAM_OUT);
- init_reg_param(&reg_params[3], "r3", 32, PARAM_OUT);
- init_reg_param(&reg_params[4], "r4", 32, PARAM_OUT);
- init_reg_param(&reg_params[5], "r5", 32, PARAM_OUT);
- init_reg_param(&reg_params[6], "r6", 32, PARAM_OUT);
- init_reg_param(&reg_params[7], "r7", 32, PARAM_OUT);
-
- while (wcount > 0)
- {
- u32 thisrun_count = (wcount > (buffer_size / 4)) ? (buffer_size / 4) : wcount;
-
- target_write_buffer(target, source->address, thisrun_count * 4, buffer);
-
- buf_set_u32(reg_params[0].value, 0, 32, source->address);
- buf_set_u32(reg_params[1].value, 0, 32, address);
- buf_set_u32(reg_params[2].value, 0, 32, 4*thisrun_count);
- WARNING("Algorithm flash write %i words to 0x%x, %i remaining",thisrun_count,address, wcount);
- DEBUG("Algorithm flash write %i words to 0x%x, %i remaining",thisrun_count,address, wcount);
- if ((retval = target->type->run_algorithm(target, 0, NULL, 3, reg_params, write_algorithm->address, write_algorithm->address + sizeof(stellaris_write_code)-10, 10000, &armv7m_info)) != ERROR_OK)
- {
- ERROR("error executing stellaris flash write algorithm");
- target_free_working_area(target, source);
- destroy_reg_param(&reg_params[0]);
- destroy_reg_param(&reg_params[1]);
- destroy_reg_param(&reg_params[2]);
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- buffer += thisrun_count * 4;
- address += thisrun_count * 4;
- wcount -= thisrun_count;
- }
-
-
- target_free_working_area(target, write_algorithm);
- target_free_working_area(target, source);
-
- destroy_reg_param(&reg_params[0]);
- destroy_reg_param(&reg_params[1]);
- destroy_reg_param(&reg_params[2]);
- destroy_reg_param(&reg_params[3]);
- destroy_reg_param(&reg_params[4]);
- destroy_reg_param(&reg_params[5]);
- destroy_reg_param(&reg_params[6]);
- destroy_reg_param(&reg_params[7]);
-
- return ERROR_OK;
-}
-
-int stellaris_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
-{
- stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
- target_t *target = bank->target;
- u32 address = offset;
- u32 flash_cris,flash_fmc;
- u32 retval;
-
- DEBUG("(bank=%08X buffer=%08X offset=%08X count=%08X)",
- (unsigned int)bank, (unsigned int)buffer, offset, count);
-
- if (stellaris_info->did1 == 0)
- {
- stellaris_read_part_info(bank);
- }
-
- if (stellaris_info->did1 == 0)
- {
- WARNING("Cannot identify target as a Stellaris processor");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- if((offset & 3) || (count & 3))
- {
- WARNING("offset size must be word aligned");
- return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
- }
-
- if (offset + count > bank->size)
- return ERROR_FLASH_DST_OUT_OF_BANK;
-
- /* Configure the flash controller timing */
- stellaris_read_clock_info(bank);
- stellaris_set_flash_mode(bank,0);
-
-
- /* Clear and disable flash programming interrupts */
- target_write_u32(target, FLASH_CIM, 0);
- target_write_u32(target, FLASH_MISC, PMISC|AMISC);
-
- /* multiple words to be programmed? */
- if (count > 0)
- {
- /* try using a block write */
- if ((retval = stellaris_write_block(bank, buffer, offset, count/4)) != ERROR_OK)
- {
- if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
- {
- /* if block write failed (no sufficient working area),
- * we use normal (slow) single dword accesses */
- WARNING("couldn't use block writes, falling back to single memory accesses");
- }
- else if (retval == ERROR_FLASH_OPERATION_FAILED)
- {
- /* if an error occured, we examine the reason, and quit */
- target_read_u32(target, FLASH_CRIS, &flash_cris);
-
- ERROR("flash writing failed with CRIS: 0x%x", flash_cris);
- return ERROR_FLASH_OPERATION_FAILED;
- }
- }
- else
- {
- buffer += count * 4;
- address += count * 4;
- count = 0;
- }
- }
-
-
-
- while(count>0)
- {
- if (!(address&0xff)) DEBUG("0x%x",address);
- /* Program one word */
- target_write_u32(target, FLASH_FMA, address);
- target_write_buffer(target, FLASH_FMD, 4, buffer);
- target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_WRITE);
- //DEBUG("0x%x 0x%x 0x%x",address,buf_get_u32(buffer, 0, 32),FMC_WRKEY | FMC_WRITE);
- /* Wait until write complete */
- do
- {
- target_read_u32(target, FLASH_FMC, &flash_fmc);
- }
- while(flash_fmc & FMC_WRITE);
- buffer += 4;
- address += 4;
- count -= 4;
- }
- /* Check acess violations */
- target_read_u32(target, FLASH_CRIS, &flash_cris);
- if(flash_cris & (AMASK))
- {
- DEBUG("flash_cris 0x%x", flash_cris);
- return ERROR_FLASH_OPERATION_FAILED;
- }
- return ERROR_OK;
-}
-
-
-int stellaris_probe(struct flash_bank_s *bank)
-{
- /* we can't probe on an stellaris
- * if this is an stellaris, it has the configured flash
- */
- stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
-
- stellaris_info->probed = 0;
-
- if (stellaris_info->did1 == 0)
- {
- stellaris_read_part_info(bank);
- }
-
- if (stellaris_info->did1 == 0)
- {
- WARNING("Cannot identify target as a LMI Stellaris");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- stellaris_info->probed = 1;
-
- return ERROR_OK;
-}
-
-int stellaris_auto_probe(struct flash_bank_s *bank)
-{
- stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
- if (stellaris_info->probed)
- return ERROR_OK;
- return stellaris_probe(bank);
-}
+/***************************************************************************
+ * Copyright (C) 2006 by Magnus Lundin *
+ * lundin@mlu.mine.nu *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+
+/***************************************************************************
+* STELLARIS is tested on LM3S811
+*
+*
+*
+ ***************************************************************************/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "replacements.h"
+
+#include "stellaris.h"
+#include "cortex_m3.h"
+
+#include "flash.h"
+#include "target.h"
+#include "log.h"
+#include "binarybuffer.h"
+#include "types.h"
+
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#define DID0_VER(did0) ((did0>>28)&0x07)
+int stellaris_register_commands(struct command_context_s *cmd_ctx);
+int stellaris_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
+int stellaris_erase(struct flash_bank_s *bank, int first, int last);
+int stellaris_protect(struct flash_bank_s *bank, int set, int first, int last);
+int stellaris_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
+int stellaris_auto_probe(struct flash_bank_s *bank);
+int stellaris_probe(struct flash_bank_s *bank);
+int stellaris_erase_check(struct flash_bank_s *bank);
+int stellaris_protect_check(struct flash_bank_s *bank);
+int stellaris_info(struct flash_bank_s *bank, char *buf, int buf_size);
+
+int stellaris_read_part_info(struct flash_bank_s *bank);
+u32 stellaris_get_flash_status(flash_bank_t *bank);
+void stellaris_set_flash_mode(flash_bank_t *bank,int mode);
+u32 stellaris_wait_status_busy(flash_bank_t *bank, u32 waitbits, int timeout);
+
+int stellaris_read_part_info(struct flash_bank_s *bank);
+
+flash_driver_t stellaris_flash =
+{
+ .name = "stellaris",
+ .register_commands = stellaris_register_commands,
+ .flash_bank_command = stellaris_flash_bank_command,
+ .erase = stellaris_erase,
+ .protect = stellaris_protect,
+ .write = stellaris_write,
+ .probe = stellaris_probe,
+ .auto_probe = stellaris_auto_probe,
+ .erase_check = stellaris_erase_check,
+ .protect_check = stellaris_protect_check,
+ .info = stellaris_info
+};
+
+
+struct {
+ u32 partno;
+ char *partname;
+} StellarisParts[] =
+{
+ {0x01,"LM3S101"},
+ {0x02,"LM3S102"},
+ {0x19,"LM3S300"},
+ {0x11,"LM3S301"},
+ {0x12,"LM3S310"},
+ {0x1A,"LM3S308"},
+ {0x13,"LM3S315"},
+ {0x14,"LM3S316"},
+ {0x17,"LM3S317"},
+ {0x18,"LM3S318"},
+ {0x15,"LM3S328"},
+ {0x2A,"LM3S600"},
+ {0x21,"LM3S601"},
+ {0x2B,"LM3S608"},
+ {0x22,"LM3S610"},
+ {0x23,"LM3S611"},
+ {0x24,"LM3S612"},
+ {0x25,"LM3S613"},
+ {0x26,"LM3S615"},
+ {0x28,"LM3S617"},
+ {0x29,"LM3S618"},
+ {0x27,"LM3S628"},
+ {0x38,"LM3S800"},
+ {0x31,"LM3S801"},
+ {0x39,"LM3S808"},
+ {0x32,"LM3S811"},
+ {0x33,"LM3S812"},
+ {0x34,"LM3S815"},
+ {0x36,"LM3S817"},
+ {0x37,"LM3S818"},
+ {0x35,"LM3S828"},
+ {0x51,"LM3S2110"},
+ {0x52,"LM3S2739"},
+ {0x53,"LM3S2651"},
+ {0x54,"LM3S2939"},
+ {0x55,"LM3S2965"},
+ {0x56,"LM3S2432"},
+ {0x57,"LM3S2620"},
+ {0x58,"LM3S2950"},
+ {0x59,"LM3S2412"},
+ {0x5A,"LM3S2533"},
+ {0x61,"LM3S8630"},
+ {0x62,"LM3S8970"},
+ {0x63,"LM3S8730"},
+ {0x64,"LM3S8530"},
+ {0x65,"LM3S8930"},
+ {0x71,"LM3S6610"},
+ {0x72,"LM3S6950"},
+ {0x73,"LM3S6965"},
+ {0x74,"LM3S6110"},
+ {0x75,"LM3S6432"},
+ {0x76,"LM3S6537"},
+ {0x77,"LM3S6753"},
+ {0x78,"LM3S6952"},
+ {0x82,"LM3S6422"},
+ {0x83,"LM3S6633"},
+ {0x84,"LM3S2139"},
+ {0x85,"LM3S2637"},
+ {0x86,"LM3S8738"},
+ {0x88,"LM3S8938"},
+ {0x89,"LM3S6938"},
+ {0x8B,"LM3S6637"},
+ {0x8C,"LM3S8933"},
+ {0x8D,"LM3S8733"},
+ {0x8E,"LM3S8538"},
+ {0x8F,"LM3S2948"},
+ {0xA1,"LM3S6100"},
+ {0xA2,"LM3S2410"},
+ {0xA3,"LM3S6730"},
+ {0xA4,"LM3S2730"},
+ {0xA5,"LM3S6420"},
+ {0xA6,"LM3S8962"},
+ {0xB3,"LM3S1635"},
+ {0xB4,"LM3S1850"},
+ {0xB5,"LM3S1960"},
+ {0xB7,"LM3S1937"},
+ {0xB8,"LM3S1968"},
+ {0xB9,"LM3S1751"},
+ {0xBA,"LM3S1439"},
+ {0xBB,"LM3S1512"},
+ {0xBC,"LM3S1435"},
+ {0xBD,"LM3S1637"},
+ {0xBE,"LM3S1958"},
+ {0xBF,"LM3S1110"},
+ {0xC0,"LM3S1620"},
+ {0xC1,"LM3S1150"},
+ {0xC2,"LM3S1165"},
+ {0xC3,"LM3S1133"},
+ {0xC4,"LM3S1162"},
+ {0xC5,"LM3S1138"},
+ {0xC6,"LM3S1332"},
+ {0xC7,"LM3S1538"},
+ {0xD0,"LM3S6815"},
+ {0xD1,"LM3S6816"},
+ {0xD2,"LM3S6915"},
+ {0xD3,"LM3S6916"},
+ {0xD4,"LM3S2016"},
+ {0xD5,"LM3S1615"},
+ {0xD6,"LM3S1616"},
+ {0xD7,"LM3S8971"},
+ {0xD8,"LM3S1108"},
+ {0xD9,"LM3S1101"},
+ {0xDA,"LM3S1608"},
+ {0xDB,"LM3S1601"},
+ {0xDC,"LM3S1918"},
+ {0xDD,"LM3S1911"},
+ {0xDE,"LM3S2108"},
+ {0xDF,"LM3S2101"},
+ {0xE0,"LM3S2608"},
+ {0xE1,"LM3S2601"},
+ {0xE2,"LM3S2918"},
+ {0xE3,"LM3S2911"},
+ {0xE4,"LM3S6118"},
+ {0xE5,"LM3S6111"},
+ {0xE6,"LM3S6618"},
+ {0xE7,"LM3S6611"},
+ {0xE8,"LM3S6918"},
+ {0xE9,"LM3S6911"},
+ {0,"Unknown part"}
+};
+
+char * StellarisClassname[2] =
+{
+ "Sandstorm",
+ "Fury"
+};
+
+/***************************************************************************
+* openocd command interface *
+***************************************************************************/
+
+/* flash_bank stellaris <base> <size> 0 0 <target#>
+ */
+int stellaris_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
+{
+ stellaris_flash_bank_t *stellaris_info;
+
+ if (argc < 6)
+ {
+ WARNING("incomplete flash_bank stellaris configuration");
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ stellaris_info = calloc(sizeof(stellaris_flash_bank_t),1);
+ bank->base = 0x0;
+ bank->driver_priv = stellaris_info;
+
+ stellaris_info->target_name = "Unknown target";
+
+ /* part wasn't probed for info yet */
+ stellaris_info->did1 = 0;
+
+ /* TODO Use an optional main oscillator clock rate in kHz from arg[6] */
+ return ERROR_OK;
+}
+
+int stellaris_register_commands(struct command_context_s *cmd_ctx)
+{
+/*
+ command_t *stellaris_cmd = register_command(cmd_ctx, NULL, "stellaris", NULL, COMMAND_ANY, NULL);
+ register_command(cmd_ctx, stellaris_cmd, "gpnvm", stellaris_handle_gpnvm_command, COMMAND_EXEC,
+ "stellaris gpnvm <num> <bit> set|clear, set or clear stellaris gpnvm bit");
+*/
+ return ERROR_OK;
+}
+
+int stellaris_info(struct flash_bank_s *bank, char *buf, int buf_size)
+{
+ int printed, device_class;
+ stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
+
+ stellaris_read_part_info(bank);
+
+ if (stellaris_info->did1 == 0)
+ {
+ printed = snprintf(buf, buf_size, "Cannot identify target as a Stellaris\n");
+ buf += printed;
+ buf_size -= printed;
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ if (DID0_VER(stellaris_info->did0)>0)
+ {
+ device_class = (stellaris_info->did0>>16)&0xFF;
+ }
+ else
+ {
+ device_class = 0;
+ }
+ printed = snprintf(buf, buf_size, "\nLMI Stellaris information: Chip is class %i(%s) %s v%c.%i\n",
+ device_class, StellarisClassname[device_class], stellaris_info->target_name,
+ 'A' + (stellaris_info->did0>>8)&0xFF, (stellaris_info->did0)&0xFF);
+ buf += printed;
+ buf_size -= printed;
+
+ printed = snprintf(buf, buf_size, "did1: 0x%8.8x, arch: 0x%4.4x, eproc: %s, ramsize:%ik, flashsize: %ik\n",
+ stellaris_info->did1, stellaris_info->did1, "ARMV7M", (1+(stellaris_info->dc0>>16)&0xFFFF)/4, (1+stellaris_info->dc0&0xFFFF)*2);
+ buf += printed;
+ buf_size -= printed;
+
+ printed = snprintf(buf, buf_size, "master clock(estimated): %ikHz, rcc is 0x%x \n", stellaris_info->mck_freq / 1000, stellaris_info->rcc);
+ buf += printed;
+ buf_size -= printed;
+
+ if (stellaris_info->num_lockbits>0) {
+ printed = snprintf(buf, buf_size, "pagesize: %i, lockbits: %i 0x%4.4x, pages in lock region: %i \n", stellaris_info->pagesize, stellaris_info->num_lockbits, stellaris_info->lockbits,stellaris_info->num_pages/stellaris_info->num_lockbits);
+ buf += printed;
+ buf_size -= printed;
+ }
+ return ERROR_OK;
+}
+
+/***************************************************************************
+* chip identification and status *
+***************************************************************************/
+
+u32 stellaris_get_flash_status(flash_bank_t *bank)
+{
+ target_t *target = bank->target;
+ u32 fmc;
+
+ target_read_u32(target, FLASH_CONTROL_BASE|FLASH_FMC, &fmc);
+
+ return fmc;
+}
+
+/** Read clock configuration and set stellaris_info->usec_clocks*/
+
+void stellaris_read_clock_info(flash_bank_t *bank)
+{
+ stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
+ target_t *target = bank->target;
+ u32 rcc, pllcfg, sysdiv, usesysdiv, bypass, oscsrc;
+ unsigned long mainfreq;
+
+ target_read_u32(target, SCB_BASE|RCC, &rcc);
+ DEBUG("Stellaris RCC %x",rcc);
+ target_read_u32(target, SCB_BASE|PLLCFG, &pllcfg);
+ DEBUG("Stellaris PLLCFG %x",pllcfg);
+ stellaris_info->rcc = rcc;
+
+ sysdiv = (rcc>>23)&0xF;
+ usesysdiv = (rcc>>22)&0x1;
+ bypass = (rcc>>11)&0x1;
+ oscsrc = (rcc>>4)&0x3;
+ /* xtal = (rcc>>6)&0xF; */
+ switch (oscsrc)
+ {
+ case 0:
+ mainfreq = 6000000; /* Default xtal */
+ break;
+ case 1:
+ mainfreq = 22500000; /* Internal osc. 15 MHz +- 50% */
+ break;
+ case 2:
+ mainfreq = 5625000; /* Internal osc. / 4 */
+ break;
+ case 3:
+ WARNING("Invalid oscsrc (3) in rcc register");
+ mainfreq = 6000000;
+ break;
+ }
+
+ if (!bypass)
+ mainfreq = 200000000; /* PLL out frec */
+
+ if (usesysdiv)
+ stellaris_info->mck_freq = mainfreq/(1+sysdiv);
+ else
+ stellaris_info->mck_freq = mainfreq;
+
+ /* Forget old flash timing */
+ stellaris_set_flash_mode(bank,0);
+}
+
+/* Setup the timimg registers */
+void stellaris_set_flash_mode(flash_bank_t *bank,int mode)
+{
+ stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
+ target_t *target = bank->target;
+
+ u32 usecrl = (stellaris_info->mck_freq/1000000ul-1);
+ DEBUG("usecrl = %i",usecrl);
+ target_write_u32(target, SCB_BASE|USECRL , usecrl);
+
+}
+
+u32 stellaris_wait_status_busy(flash_bank_t *bank, u32 waitbits, int timeout)
+{
+ u32 status;
+
+ /* Stellaris waits for cmdbit to clear */
+ while (((status = stellaris_get_flash_status(bank)) & waitbits) && (timeout-- > 0))
+ {
+ DEBUG("status: 0x%x", status);
+ usleep(1000);
+ }
+
+ /* Flash errors are reflected in the FLASH_CRIS register */
+
+ return status;
+}
+
+
+/* Send one command to the flash controller */
+int stellaris_flash_command(struct flash_bank_s *bank,u8 cmd,u16 pagen)
+{
+ u32 fmc;
+// stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
+ target_t *target = bank->target;
+
+ fmc = FMC_WRKEY | cmd;
+ target_write_u32(target, FLASH_CONTROL_BASE|FLASH_FMC, fmc);
+ DEBUG("Flash command: 0x%x", fmc);
+
+ if (stellaris_wait_status_busy(bank, cmd, 100))
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ return ERROR_OK;
+}
+
+/* Read device id register, main clock frequency register and fill in driver info structure */
+int stellaris_read_part_info(struct flash_bank_s *bank)
+{
+ stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
+ target_t *target = bank->target;
+ u32 did0,did1, ver, fam, status;
+ int i;
+
+ /* Read and parse chip identification register */
+ target_read_u32(target, SCB_BASE|DID0, &did0);
+ target_read_u32(target, SCB_BASE|DID1, &did1);
+ target_read_u32(target, SCB_BASE|DC0, &stellaris_info->dc0);
+ target_read_u32(target, SCB_BASE|DC1, &stellaris_info->dc1);
+ DEBUG("did0 0x%x, did1 0x%x, dc0 0x%x, dc1 0x%x",did0, did1, stellaris_info->dc0,stellaris_info->dc1);
+
+ ver = did0 >> 28;
+ if((ver != 0) && (ver != 1))
+ {
+ WARNING("Unknown did0 version, cannot identify target");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ ver = did1 >> 28;
+ fam = (did1 >> 24) & 0xF;
+ if(((ver != 0) && (ver != 1)) || (fam != 0))
+ {
+ WARNING("Unknown did1 version/family, cannot positively identify target as a Stellaris");
+ }
+
+ if (did1 == 0)
+ {
+ WARNING("Cannot identify target as a Stellaris");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ for (i=0;StellarisParts[i].partno;i++)
+ {
+ if (StellarisParts[i].partno==((did1>>16)&0xFF))
+ break;
+ }
+
+ stellaris_info->target_name = StellarisParts[i].partname;
+
+ stellaris_info->did0 = did0;
+ stellaris_info->did1 = did1;
+
+ stellaris_info->num_lockbits = 1+stellaris_info->dc0&0xFFFF;
+ stellaris_info->num_pages = 2*(1+stellaris_info->dc0&0xFFFF);
+ stellaris_info->pagesize = 1024;
+ bank->size = 1024*stellaris_info->num_pages;
+ stellaris_info->pages_in_lockregion = 2;
+ target_read_u32(target, SCB_BASE|FMPPE, &stellaris_info->lockbits);
+
+ // Read main and master clock freqency register
+ stellaris_read_clock_info(bank);
+
+ status = stellaris_get_flash_status(bank);
+
+ return ERROR_OK;
+}
+
+/***************************************************************************
+* flash operations *
+***************************************************************************/
+
+int stellaris_erase_check(struct flash_bank_s *bank)
+{
+ /*
+
+ stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
+ target_t *target = bank->target;
+ int i;
+
+ */
+
+ return ERROR_OK;
+}
+
+int stellaris_protect_check(struct flash_bank_s *bank)
+{
+ u32 status;
+
+ stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
+
+ if (stellaris_info->did1 == 0)
+ {
+ stellaris_read_part_info(bank);
+ }
+
+ if (stellaris_info->did1 == 0)
+ {
+ WARNING("Cannot identify target as an AT91SAM");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ status = stellaris_get_flash_status(bank);
+ stellaris_info->lockbits = status >> 16;
+
+ return ERROR_OK;
+}
+
+int stellaris_erase(struct flash_bank_s *bank, int first, int last)
+{
+ int banknr;
+ u32 flash_fmc, flash_cris;
+ stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
+ target_t *target = bank->target;
+
+ if (stellaris_info->did1 == 0)
+ {
+ stellaris_read_part_info(bank);
+ }
+
+ if (stellaris_info->did1 == 0)
+ {
+ WARNING("Cannot identify target as Stellaris");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ if ((first < 0) || (last < first) || (last >= stellaris_info->num_pages))
+ {
+ return ERROR_FLASH_SECTOR_INVALID;
+ }
+
+ /* Configure the flash controller timing */
+ stellaris_read_clock_info(bank);
+ stellaris_set_flash_mode(bank,0);
+
+ /* Clear and disable flash programming interrupts */
+ target_write_u32(target, FLASH_CIM, 0);
+ target_write_u32(target, FLASH_MISC, PMISC|AMISC);
+
+ if ((first == 0) && (last == (stellaris_info->num_pages-1)))
+ {
+ target_write_u32(target, FLASH_FMA, 0);
+ target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_MERASE);
+ /* Wait until erase complete */
+ do
+ {
+ target_read_u32(target, FLASH_FMC, &flash_fmc);
+ }
+ while(flash_fmc & FMC_MERASE);
+
+ /* if device has > 128k, then second erase cycle is needed */
+ if(stellaris_info->num_pages * stellaris_info->pagesize > 0x20000)
+ {
+ target_write_u32(target, FLASH_FMA, 0x20000);
+ target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_MERASE);
+ /* Wait until erase complete */
+ do
+ {
+ target_read_u32(target, FLASH_FMC, &flash_fmc);
+ }
+ while(flash_fmc & FMC_MERASE);
+ }
+
+ return ERROR_OK;
+ }
+
+ for (banknr=first;banknr<=last;banknr++)
+ {
+ /* Address is first word in page */
+ target_write_u32(target, FLASH_FMA, banknr*stellaris_info->pagesize);
+ /* Write erase command */
+ target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_ERASE);
+ /* Wait until erase complete */
+ do
+ {
+ target_read_u32(target, FLASH_FMC, &flash_fmc);
+ }
+ while(flash_fmc & FMC_ERASE);
+
+ /* Check acess violations */
+ target_read_u32(target, FLASH_CRIS, &flash_cris);
+ if(flash_cris & (AMASK))
+ {
+ WARNING("Error erasing flash page %i, flash_cris 0x%x", banknr, flash_cris);
+ target_write_u32(target, FLASH_CRIS, 0);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ }
+
+ return ERROR_OK;
+}
+
+int stellaris_protect(struct flash_bank_s *bank, int set, int first, int last)
+{
+ u32 fmppe, flash_fmc, flash_cris;
+ int lockregion;
+
+ stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
+ target_t *target = bank->target;
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if ((first < 0) || (last < first) || (last >= stellaris_info->num_lockbits))
+ {
+ return ERROR_FLASH_SECTOR_INVALID;
+ }
+
+ if (stellaris_info->did1 == 0)
+ {
+ stellaris_read_part_info(bank);
+ }
+
+ if (stellaris_info->did1 == 0)
+ {
+ WARNING("Cannot identify target as an Stellaris MCU");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ /* Configure the flash controller timing */
+ stellaris_read_clock_info(bank);
+ stellaris_set_flash_mode(bank,0);
+
+ fmppe = stellaris_info->lockbits;
+ for (lockregion=first;lockregion<=last;lockregion++)
+ {
+ if (set)
+ fmppe &= ~(1<<lockregion);
+ else
+ fmppe |= (1<<lockregion);
+ }
+
+ /* Clear and disable flash programming interrupts */
+ target_write_u32(target, FLASH_CIM, 0);
+ target_write_u32(target, FLASH_MISC, PMISC|AMISC);
+
+ DEBUG("fmppe 0x%x",fmppe);
+ target_write_u32(target, SCB_BASE|FMPPE, fmppe);
+ /* Commit FMPPE */
+ target_write_u32(target, FLASH_FMA, 1);
+ /* Write commit command */
+ /* TODO safety check, sice this cannot be undone */
+ WARNING("Flash protection cannot be removed once commited, commit is NOT executed !");
+ /* target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_COMT); */
+ /* Wait until erase complete */
+ do
+ {
+ target_read_u32(target, FLASH_FMC, &flash_fmc);
+ }
+ while(flash_fmc & FMC_COMT);
+
+ /* Check acess violations */
+ target_read_u32(target, FLASH_CRIS, &flash_cris);
+ if(flash_cris & (AMASK))
+ {
+ WARNING("Error setting flash page protection, flash_cris 0x%x", flash_cris);
+ target_write_u32(target, FLASH_CRIS, 0);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ target_read_u32(target, SCB_BASE|FMPPE, &stellaris_info->lockbits);
+
+ return ERROR_OK;
+}
+
+u8 stellaris_write_code[] =
+{
+/*
+ Call with :
+ r0 = buffer address
+ r1 = destination address
+ r2 = bytecount (in) - endaddr (work)
+
+ Used registers:
+ r3 = pFLASH_CTRL_BASE
+ r4 = FLASHWRITECMD
+ r5 = #1
+ r6 = bytes written
+ r7 = temp reg
+*/
+ 0x07,0x4B, /* ldr r3,pFLASH_CTRL_BASE */
+ 0x08,0x4C, /* ldr r4,FLASHWRITECMD */
+ 0x01,0x25, /* movs r5, 1 */
+ 0x00,0x26, /* movs r6, #0 */
+/* mainloop: */
+ 0x19,0x60, /* str r1, [r3, #0] */
+ 0x87,0x59, /* ldr r7, [r0, r6] */
+ 0x5F,0x60, /* str r7, [r3, #4] */
+ 0x9C,0x60, /* str r4, [r3, #8] */
+/* waitloop: */
+ 0x9F,0x68, /* ldr r7, [r3, #8] */
+ 0x2F,0x42, /* tst r7, r5 */
+ 0xFC,0xD1, /* bne waitloop */
+ 0x04,0x31, /* adds r1, r1, #4 */
+ 0x04,0x36, /* adds r6, r6, #4 */
+ 0x96,0x42, /* cmp r6, r2 */
+ 0xF4,0xD1, /* bne mainloop */
+ 0x00,0xBE, /* bkpt #0 */
+/* pFLASH_CTRL_BASE: */
+ 0x00,0xD0,0x0F,0x40, /* .word 0x400FD000 */
+/* FLASHWRITECMD: */
+ 0x01,0x00,0x42,0xA4 /* .word 0xA4420001 */
+};
+
+int stellaris_write_block(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 wcount)
+{
+// stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
+ target_t *target = bank->target;
+ u32 buffer_size = 8192;
+ working_area_t *source;
+ working_area_t *write_algorithm;
+ u32 address = bank->base + offset;
+ reg_param_t reg_params[8];
+ armv7m_algorithm_t armv7m_info;
+ int retval;
+
+ DEBUG("(bank=%08X buffer=%08X offset=%08X wcount=%08X)",
+ (unsigned int)bank, (unsigned int)buffer, offset, wcount);
+
+ /* flash write code */
+ if (target_alloc_working_area(target, sizeof(stellaris_write_code), &write_algorithm) != ERROR_OK)
+ {
+ WARNING("no working area available, can't do block memory writes");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ };
+
+ target_write_buffer(target, write_algorithm->address, sizeof(stellaris_write_code), stellaris_write_code);
+
+ /* memory buffer */
+ while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK)
+ {
+ DEBUG("called target_alloc_working_area(target=%08X buffer_size=%08X source=%08X)",
+ (unsigned int)target, buffer_size, (unsigned int)source);
+ buffer_size /= 2;
+ if (buffer_size <= 256)
+ {
+ /* if we already allocated the writing code, but failed to get a buffer, free the algorithm */
+ if (write_algorithm)
+ target_free_working_area(target, write_algorithm);
+
+ WARNING("no large enough working area available, can't do block memory writes");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+ };
+
+ armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
+ armv7m_info.core_mode = ARMV7M_MODE_ANY;
+ armv7m_info.core_state = ARMV7M_STATE_THUMB;
+
+ init_reg_param(&reg_params[0], "r0", 32, PARAM_OUT);
+ init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT);
+ init_reg_param(&reg_params[2], "r2", 32, PARAM_OUT);
+ init_reg_param(&reg_params[3], "r3", 32, PARAM_OUT);
+ init_reg_param(&reg_params[4], "r4", 32, PARAM_OUT);
+ init_reg_param(&reg_params[5], "r5", 32, PARAM_OUT);
+ init_reg_param(&reg_params[6], "r6", 32, PARAM_OUT);
+ init_reg_param(&reg_params[7], "r7", 32, PARAM_OUT);
+
+ while (wcount > 0)
+ {
+ u32 thisrun_count = (wcount > (buffer_size / 4)) ? (buffer_size / 4) : wcount;
+
+ target_write_buffer(target, source->address, thisrun_count * 4, buffer);
+
+ buf_set_u32(reg_params[0].value, 0, 32, source->address);
+ buf_set_u32(reg_params[1].value, 0, 32, address);
+ buf_set_u32(reg_params[2].value, 0, 32, 4*thisrun_count);
+ WARNING("Algorithm flash write %i words to 0x%x, %i remaining",thisrun_count,address, wcount);
+ DEBUG("Algorithm flash write %i words to 0x%x, %i remaining",thisrun_count,address, wcount);
+ if ((retval = target->type->run_algorithm(target, 0, NULL, 3, reg_params, write_algorithm->address, write_algorithm->address + sizeof(stellaris_write_code)-10, 10000, &armv7m_info)) != ERROR_OK)
+ {
+ ERROR("error executing stellaris flash write algorithm");
+ target_free_working_area(target, source);
+ destroy_reg_param(&reg_params[0]);
+ destroy_reg_param(&reg_params[1]);
+ destroy_reg_param(&reg_params[2]);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ buffer += thisrun_count * 4;
+ address += thisrun_count * 4;
+ wcount -= thisrun_count;
+ }
+
+
+ target_free_working_area(target, write_algorithm);
+ target_free_working_area(target, source);
+
+ destroy_reg_param(&reg_params[0]);
+ destroy_reg_param(&reg_params[1]);
+ destroy_reg_param(&reg_params[2]);
+ destroy_reg_param(&reg_params[3]);
+ destroy_reg_param(&reg_params[4]);
+ destroy_reg_param(&reg_params[5]);
+ destroy_reg_param(&reg_params[6]);
+ destroy_reg_param(&reg_params[7]);
+
+ return ERROR_OK;
+}
+
+int stellaris_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
+{
+ stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
+ target_t *target = bank->target;
+ u32 address = offset;
+ u32 flash_cris,flash_fmc;
+ u32 retval;
+
+ DEBUG("(bank=%08X buffer=%08X offset=%08X count=%08X)",
+ (unsigned int)bank, (unsigned int)buffer, offset, count);
+
+ if (stellaris_info->did1 == 0)
+ {
+ stellaris_read_part_info(bank);
+ }
+
+ if (stellaris_info->did1 == 0)
+ {
+ WARNING("Cannot identify target as a Stellaris processor");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ if((offset & 3) || (count & 3))
+ {
+ WARNING("offset size must be word aligned");
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ }
+
+ if (offset + count > bank->size)
+ return ERROR_FLASH_DST_OUT_OF_BANK;
+
+ /* Configure the flash controller timing */
+ stellaris_read_clock_info(bank);
+ stellaris_set_flash_mode(bank,0);
+
+
+ /* Clear and disable flash programming interrupts */
+ target_write_u32(target, FLASH_CIM, 0);
+ target_write_u32(target, FLASH_MISC, PMISC|AMISC);
+
+ /* multiple words to be programmed? */
+ if (count > 0)
+ {
+ /* try using a block write */
+ if ((retval = stellaris_write_block(bank, buffer, offset, count/4)) != ERROR_OK)
+ {
+ if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
+ {
+ /* if block write failed (no sufficient working area),
+ * we use normal (slow) single dword accesses */
+ WARNING("couldn't use block writes, falling back to single memory accesses");
+ }
+ else if (retval == ERROR_FLASH_OPERATION_FAILED)
+ {
+ /* if an error occured, we examine the reason, and quit */
+ target_read_u32(target, FLASH_CRIS, &flash_cris);
+
+ ERROR("flash writing failed with CRIS: 0x%x", flash_cris);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ }
+ else
+ {
+ buffer += count * 4;
+ address += count * 4;
+ count = 0;
+ }
+ }
+
+
+
+ while(count>0)
+ {
+ if (!(address&0xff)) DEBUG("0x%x",address);
+ /* Program one word */
+ target_write_u32(target, FLASH_FMA, address);
+ target_write_buffer(target, FLASH_FMD, 4, buffer);
+ target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_WRITE);
+ //DEBUG("0x%x 0x%x 0x%x",address,buf_get_u32(buffer, 0, 32),FMC_WRKEY | FMC_WRITE);
+ /* Wait until write complete */
+ do
+ {
+ target_read_u32(target, FLASH_FMC, &flash_fmc);
+ }
+ while(flash_fmc & FMC_WRITE);
+ buffer += 4;
+ address += 4;
+ count -= 4;
+ }
+ /* Check acess violations */
+ target_read_u32(target, FLASH_CRIS, &flash_cris);
+ if(flash_cris & (AMASK))
+ {
+ DEBUG("flash_cris 0x%x", flash_cris);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ return ERROR_OK;
+}
+
+
+int stellaris_probe(struct flash_bank_s *bank)
+{
+ /* we can't probe on an stellaris
+ * if this is an stellaris, it has the configured flash
+ */
+ stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
+
+ stellaris_info->probed = 0;
+
+ if (stellaris_info->did1 == 0)
+ {
+ stellaris_read_part_info(bank);
+ }
+
+ if (stellaris_info->did1 == 0)
+ {
+ WARNING("Cannot identify target as a LMI Stellaris");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ stellaris_info->probed = 1;
+
+ return ERROR_OK;
+}
+
+int stellaris_auto_probe(struct flash_bank_s *bank)
+{
+ stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
+ if (stellaris_info->probed)
+ return ERROR_OK;
+ return stellaris_probe(bank);
+}
diff --git a/src/flash/stm32x.c b/src/flash/stm32x.c
index 0935c2c7..f7dc1033 100644
--- a/src/flash/stm32x.c
+++ b/src/flash/stm32x.c
@@ -1,988 +1,988 @@
-/***************************************************************************
- * Copyright (C) 2005 by Dominic Rath *
- * Dominic.Rath@gmx.de *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- ***************************************************************************/
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "replacements.h"
-
-#include "stm32x.h"
-#include "flash.h"
-#include "target.h"
-#include "log.h"
-#include "armv7m.h"
-#include "algorithm.h"
-#include "binarybuffer.h"
-
-#include <stdlib.h>
-#include <string.h>
-
-int stm32x_register_commands(struct command_context_s *cmd_ctx);
-int stm32x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
-int stm32x_erase(struct flash_bank_s *bank, int first, int last);
-int stm32x_protect(struct flash_bank_s *bank, int set, int first, int last);
-int stm32x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
-int stm32x_probe(struct flash_bank_s *bank);
-int stm32x_auto_probe(struct flash_bank_s *bank);
-int stm32x_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int stm32x_protect_check(struct flash_bank_s *bank);
-int stm32x_erase_check(struct flash_bank_s *bank);
-int stm32x_info(struct flash_bank_s *bank, char *buf, int buf_size);
-
-int stm32x_handle_lock_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int stm32x_handle_unlock_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int stm32x_handle_options_read_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int stm32x_handle_options_write_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int stm32x_handle_mass_erase_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-
-flash_driver_t stm32x_flash =
-{
- .name = "stm32x",
- .register_commands = stm32x_register_commands,
- .flash_bank_command = stm32x_flash_bank_command,
- .erase = stm32x_erase,
- .protect = stm32x_protect,
- .write = stm32x_write,
- .probe = stm32x_probe,
- .auto_probe = stm32x_auto_probe,
- .erase_check = stm32x_erase_check,
- .protect_check = stm32x_protect_check,
- .info = stm32x_info
-};
-
-int stm32x_register_commands(struct command_context_s *cmd_ctx)
-{
- command_t *stm32x_cmd = register_command(cmd_ctx, NULL, "stm32x", NULL, COMMAND_ANY, "stm32x flash specific commands");
-
- register_command(cmd_ctx, stm32x_cmd, "lock", stm32x_handle_lock_command, COMMAND_EXEC,
- "lock device");
- register_command(cmd_ctx, stm32x_cmd, "unlock", stm32x_handle_unlock_command, COMMAND_EXEC,
- "unlock protected device");
- register_command(cmd_ctx, stm32x_cmd, "mass_erase", stm32x_handle_mass_erase_command, COMMAND_EXEC,
- "mass erase device");
- register_command(cmd_ctx, stm32x_cmd, "options_read", stm32x_handle_options_read_command, COMMAND_EXEC,
- "read device option bytes");
- register_command(cmd_ctx, stm32x_cmd, "options_write", stm32x_handle_options_write_command, COMMAND_EXEC,
- "write device option bytes");
- return ERROR_OK;
-}
-
-/* flash bank stm32x <base> <size> 0 0 <target#>
- */
-int stm32x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
-{
- stm32x_flash_bank_t *stm32x_info;
-
- if (argc < 6)
- {
- WARNING("incomplete flash_bank stm32x configuration");
- return ERROR_FLASH_BANK_INVALID;
- }
-
- stm32x_info = malloc(sizeof(stm32x_flash_bank_t));
- bank->driver_priv = stm32x_info;
-
- stm32x_info->write_algorithm = NULL;
- stm32x_info->probed = 0;
-
- return ERROR_OK;
-}
-
-u32 stm32x_get_flash_status(flash_bank_t *bank)
-{
- target_t *target = bank->target;
- u32 status;
-
- target_read_u32(target, STM32_FLASH_SR, &status);
-
- return status;
-}
-
-u32 stm32x_wait_status_busy(flash_bank_t *bank, int timeout)
-{
- u32 status;
-
- /* wait for busy to clear */
- while (((status = stm32x_get_flash_status(bank)) & FLASH_BSY) && (timeout-- > 0))
- {
- DEBUG("status: 0x%x", status);
- usleep(1000);
- }
-
- return status;
-}
-
-int stm32x_read_options(struct flash_bank_s *bank)
-{
- u32 optiondata;
- stm32x_flash_bank_t *stm32x_info = NULL;
- target_t *target = bank->target;
-
- stm32x_info = bank->driver_priv;
-
- /* read current option bytes */
- target_read_u32(target, STM32_FLASH_OBR, &optiondata);
-
- stm32x_info->option_bytes.user_options = (u16)0xFFF8|((optiondata >> 2) & 0x07);
- stm32x_info->option_bytes.RDP = (optiondata & (1 << OPT_READOUT)) ? 0xFFFF : 0x5AA5;
-
- if (optiondata & (1 << OPT_READOUT))
- INFO("Device Security Bit Set");
-
- /* each bit refers to a 4bank protection */
- target_read_u32(target, STM32_FLASH_WRPR, &optiondata);
-
- stm32x_info->option_bytes.protection[0] = (u16)optiondata;
- stm32x_info->option_bytes.protection[1] = (u16)(optiondata >> 8);
- stm32x_info->option_bytes.protection[2] = (u16)(optiondata >> 16);
- stm32x_info->option_bytes.protection[3] = (u16)(optiondata >> 24);
-
- return ERROR_OK;
-}
-
-int stm32x_erase_options(struct flash_bank_s *bank)
-{
- stm32x_flash_bank_t *stm32x_info = NULL;
- target_t *target = bank->target;
- u32 status;
-
- stm32x_info = bank->driver_priv;
-
- /* read current options */
- stm32x_read_options(bank);
-
- /* unlock flash registers */
- target_write_u32(target, STM32_FLASH_KEYR, KEY1);
- target_write_u32(target, STM32_FLASH_KEYR, KEY2);
-
- /* unlock option flash registers */
- target_write_u32(target, STM32_FLASH_OPTKEYR, KEY1);
- target_write_u32(target, STM32_FLASH_OPTKEYR, KEY2);
-
- /* erase option bytes */
- target_write_u32(target, STM32_FLASH_CR, FLASH_OPTER|FLASH_OPTWRE);
- target_write_u32(target, STM32_FLASH_CR, FLASH_OPTER|FLASH_STRT|FLASH_OPTWRE);
-
- status = stm32x_wait_status_busy(bank, 10);
-
- if( status & FLASH_WRPRTERR )
- return ERROR_FLASH_OPERATION_FAILED;
- if( status & FLASH_PGERR )
- return ERROR_FLASH_OPERATION_FAILED;
-
- /* clear readout protection and complementary option bytes
- * this will also force a device unlock if set */
- stm32x_info->option_bytes.RDP = 0x5AA5;
-
- return ERROR_OK;
-}
-
-int stm32x_write_options(struct flash_bank_s *bank)
-{
- stm32x_flash_bank_t *stm32x_info = NULL;
- target_t *target = bank->target;
- u32 status;
-
- stm32x_info = bank->driver_priv;
-
- /* unlock flash registers */
- target_write_u32(target, STM32_FLASH_KEYR, KEY1);
- target_write_u32(target, STM32_FLASH_KEYR, KEY2);
-
- /* unlock option flash registers */
- target_write_u32(target, STM32_FLASH_OPTKEYR, KEY1);
- target_write_u32(target, STM32_FLASH_OPTKEYR, KEY2);
-
- /* program option bytes */
- target_write_u32(target, STM32_FLASH_CR, FLASH_OPTPG|FLASH_OPTWRE);
-
- /* write user option byte */
- target_write_u16(target, STM32_OB_USER, stm32x_info->option_bytes.user_options);
-
- status = stm32x_wait_status_busy(bank, 10);
-
- if( status & FLASH_WRPRTERR )
- return ERROR_FLASH_OPERATION_FAILED;
- if( status & FLASH_PGERR )
- return ERROR_FLASH_OPERATION_FAILED;
-
- /* write protection byte 1 */
- target_write_u16(target, STM32_OB_WRP0, stm32x_info->option_bytes.protection[0]);
-
- status = stm32x_wait_status_busy(bank, 10);
-
- if( status & FLASH_WRPRTERR )
- return ERROR_FLASH_OPERATION_FAILED;
- if( status & FLASH_PGERR )
- return ERROR_FLASH_OPERATION_FAILED;
-
- /* write protection byte 2 */
- target_write_u16(target, STM32_OB_WRP1, stm32x_info->option_bytes.protection[1]);
-
- status = stm32x_wait_status_busy(bank, 10);
-
- if( status & FLASH_WRPRTERR )
- return ERROR_FLASH_OPERATION_FAILED;
- if( status & FLASH_PGERR )
- return ERROR_FLASH_OPERATION_FAILED;
-
- /* write protection byte 3 */
- target_write_u16(target, STM32_OB_WRP2, stm32x_info->option_bytes.protection[2]);
-
- status = stm32x_wait_status_busy(bank, 10);
-
- if( status & FLASH_WRPRTERR )
- return ERROR_FLASH_OPERATION_FAILED;
- if( status & FLASH_PGERR )
- return ERROR_FLASH_OPERATION_FAILED;
-
- /* write protection byte 4 */
- target_write_u16(target, STM32_OB_WRP3, stm32x_info->option_bytes.protection[3]);
-
- status = stm32x_wait_status_busy(bank, 10);
-
- if( status & FLASH_WRPRTERR )
- return ERROR_FLASH_OPERATION_FAILED;
- if( status & FLASH_PGERR )
- return ERROR_FLASH_OPERATION_FAILED;
-
- /* write readout protection bit */
- target_write_u16(target, STM32_OB_RDP, stm32x_info->option_bytes.RDP);
-
- status = stm32x_wait_status_busy(bank, 10);
-
- if( status & FLASH_WRPRTERR )
- return ERROR_FLASH_OPERATION_FAILED;
- if( status & FLASH_PGERR )
- return ERROR_FLASH_OPERATION_FAILED;
-
- target_write_u32(target, STM32_FLASH_CR, FLASH_LOCK);
-
- return ERROR_OK;
-}
-
-int stm32x_blank_check(struct flash_bank_s *bank, int first, int last)
-{
- target_t *target = bank->target;
- u8 *buffer;
- int i;
- int nBytes;
-
- if ((first < 0) || (last > bank->num_sectors))
- return ERROR_FLASH_SECTOR_INVALID;
-
- if (target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- buffer = malloc(256);
-
- for (i = first; i <= last; i++)
- {
- bank->sectors[i].is_erased = 1;
-
- target->type->read_memory(target, bank->base + bank->sectors[i].offset, 4, 256/4, buffer);
-
- for (nBytes = 0; nBytes < 256; nBytes++)
- {
- if (buffer[nBytes] != 0xFF)
- {
- bank->sectors[i].is_erased = 0;
- break;
- }
- }
- }
-
- free(buffer);
-
- return ERROR_OK;
-}
-
-int stm32x_protect_check(struct flash_bank_s *bank)
-{
- target_t *target = bank->target;
-
- u32 protection;
- int i, s;
- int num_bits;
-
- if (target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- /* each bit refers to a 4bank protection */
- target_read_u32(target, STM32_FLASH_WRPR, &protection);
-
- /* each protection bit is for 4 1K pages */
- num_bits = (bank->num_sectors / 4);
-
- for (i = 0; i < num_bits; i++)
- {
- int set = 1;
-
- if( protection & (1 << i))
- set = 0;
-
- for (s = 0; s < 4; s++)
- bank->sectors[(i * 4) + s].is_protected = set;
- }
-
- return ERROR_OK;
-}
-
-int stm32x_erase(struct flash_bank_s *bank, int first, int last)
-{
- target_t *target = bank->target;
-
- int i;
- u32 status;
-
- /* unlock flash registers */
- target_write_u32(target, STM32_FLASH_KEYR, KEY1);
- target_write_u32(target, STM32_FLASH_KEYR, KEY2);
-
- for (i = first; i <= last; i++)
- {
- target_write_u32(target, STM32_FLASH_CR, FLASH_PER);
- target_write_u32(target, STM32_FLASH_AR, bank->base + bank->sectors[i].offset);
- target_write_u32(target, STM32_FLASH_CR, FLASH_PER|FLASH_STRT);
-
- status = stm32x_wait_status_busy(bank, 10);
-
- if( status & FLASH_WRPRTERR )
- return ERROR_FLASH_OPERATION_FAILED;
- if( status & FLASH_PGERR )
- return ERROR_FLASH_OPERATION_FAILED;
- bank->sectors[i].is_erased = 1;
- }
-
- target_write_u32(target, STM32_FLASH_CR, FLASH_LOCK);
-
- return ERROR_OK;
-}
-
-int stm32x_protect(struct flash_bank_s *bank, int set, int first, int last)
-{
- stm32x_flash_bank_t *stm32x_info = NULL;
- target_t *target = bank->target;
- u16 prot_reg[4] = {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF};
- int i, reg, bit;
- int status;
- u32 protection;
-
- stm32x_info = bank->driver_priv;
-
- if (target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if ((first && (first % 4)) || ((last + 1) && (last + 1) % 4))
- {
- WARNING("sector start/end incorrect - stm32 has 4K sector protection");
- return ERROR_FLASH_SECTOR_INVALID;
- }
-
- /* each bit refers to a 4bank protection */
- target_read_u32(target, STM32_FLASH_WRPR, &protection);
-
- prot_reg[0] = (u16)protection;
- prot_reg[1] = (u16)(protection >> 8);
- prot_reg[2] = (u16)(protection >> 16);
- prot_reg[3] = (u16)(protection >> 24);
-
- for (i = first; i <= last; i++)
- {
- reg = (i / 4) / 8;
- bit = (i / 4) - (reg * 8);
-
- if( set )
- prot_reg[reg] &= ~(1 << bit);
- else
- prot_reg[reg] |= (1 << bit);
- }
-
- if ((status = stm32x_erase_options(bank)) != ERROR_OK)
- return status;
-
- stm32x_info->option_bytes.protection[0] = prot_reg[0];
- stm32x_info->option_bytes.protection[1] = prot_reg[1];
- stm32x_info->option_bytes.protection[2] = prot_reg[2];
- stm32x_info->option_bytes.protection[3] = prot_reg[3];
-
- return stm32x_write_options(bank);
-}
-
-int stm32x_write_block(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
-{
- stm32x_flash_bank_t *stm32x_info = bank->driver_priv;
- target_t *target = bank->target;
- u32 buffer_size = 8192;
- working_area_t *source;
- u32 address = bank->base + offset;
- reg_param_t reg_params[4];
- armv7m_algorithm_t armv7m_info;
- int retval = ERROR_OK;
-
- u8 stm32x_flash_write_code[] = {
- /* write: */
- 0xDF, 0xF8, 0x24, 0x40, /* ldr r4, STM32_FLASH_CR */
- 0x09, 0x4D, /* ldr r5, STM32_FLASH_SR */
- 0x4F, 0xF0, 0x01, 0x03, /* mov r3, #1 */
- 0x23, 0x60, /* str r3, [r4, #0] */
- 0x30, 0xF8, 0x02, 0x3B, /* ldrh r3, [r0], #2 */
- 0x21, 0xF8, 0x02, 0x3B, /* strh r3, [r1], #2 */
- /* busy: */
- 0x2B, 0x68, /* ldr r3, [r5, #0] */
- 0x13, 0xF0, 0x01, 0x0F, /* tst r3, #0x01 */
- 0xFB, 0xD0, /* beq busy */
- 0x13, 0xF0, 0x14, 0x0F, /* tst r3, #0x14 */
- 0x01, 0xD1, /* bne exit */
- 0x01, 0x3A, /* subs r2, r2, #1 */
- 0xED, 0xD1, /* bne write */
- /* exit: */
- 0xFE, 0xE7, /* b exit */
- 0x10, 0x20, 0x02, 0x40, /* STM32_FLASH_CR: .word 0x40022010 */
- 0x0C, 0x20, 0x02, 0x40 /* STM32_FLASH_SR: .word 0x4002200C */
- };
-
- /* flash write code */
- if (target_alloc_working_area(target, sizeof(stm32x_flash_write_code), &stm32x_info->write_algorithm) != ERROR_OK)
- {
- WARNING("no working area available, can't do block memory writes");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
-
- target_write_buffer(target, stm32x_info->write_algorithm->address, sizeof(stm32x_flash_write_code), stm32x_flash_write_code);
-
- /* memory buffer */
- while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK)
- {
- buffer_size /= 2;
- if (buffer_size <= 256)
- {
- /* if we already allocated the writing code, but failed to get a buffer, free the algorithm */
- if (stm32x_info->write_algorithm)
- target_free_working_area(target, stm32x_info->write_algorithm);
-
- WARNING("no large enough working area available, can't do block memory writes");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
- };
-
- armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
- armv7m_info.core_mode = ARMV7M_MODE_ANY;
- armv7m_info.core_state = ARMV7M_STATE_THUMB;
-
- init_reg_param(&reg_params[0], "r0", 32, PARAM_OUT);
- init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT);
- init_reg_param(&reg_params[2], "r2", 32, PARAM_OUT);
- init_reg_param(&reg_params[3], "r3", 32, PARAM_IN);
-
- while (count > 0)
- {
- u32 thisrun_count = (count > (buffer_size / 2)) ? (buffer_size / 2) : count;
-
- target_write_buffer(target, source->address, thisrun_count * 2, buffer);
-
- buf_set_u32(reg_params[0].value, 0, 32, source->address);
- buf_set_u32(reg_params[1].value, 0, 32, address);
- buf_set_u32(reg_params[2].value, 0, 32, thisrun_count);
-
- if ((retval = target->type->run_algorithm(target, 0, NULL, 4, reg_params, stm32x_info->write_algorithm->address, \
- stm32x_info->write_algorithm->address + (sizeof(stm32x_flash_write_code) - 10), 10000, &armv7m_info)) != ERROR_OK)
- {
- ERROR("error executing str7x flash write algorithm");
- break;
- }
-
- if (buf_get_u32(reg_params[3].value, 0, 32) & 0x14)
- {
- retval = ERROR_FLASH_OPERATION_FAILED;
- break;
- }
-
- buffer += thisrun_count * 2;
- address += thisrun_count * 2;
- count -= thisrun_count;
- }
-
- target_free_working_area(target, source);
- target_free_working_area(target, stm32x_info->write_algorithm);
-
- destroy_reg_param(&reg_params[0]);
- destroy_reg_param(&reg_params[1]);
- destroy_reg_param(&reg_params[2]);
- destroy_reg_param(&reg_params[3]);
-
- return retval;
-}
-
-int stm32x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
-{
- target_t *target = bank->target;
- u32 words_remaining = (count / 2);
- u32 bytes_remaining = (count & 0x00000001);
- u32 address = bank->base + offset;
- u32 bytes_written = 0;
- u8 status;
- u32 retval;
-
- if (offset & 0x1)
- {
- WARNING("offset 0x%x breaks required 2-byte alignment", offset);
- return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
- }
-
- /* unlock flash registers */
- target_write_u32(target, STM32_FLASH_KEYR, KEY1);
- target_write_u32(target, STM32_FLASH_KEYR, KEY2);
-
- /* multiple half words (2-byte) to be programmed? */
- if (words_remaining > 0)
- {
- /* try using a block write */
- if ((retval = stm32x_write_block(bank, buffer, offset, words_remaining)) != ERROR_OK)
- {
- if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
- {
- /* if block write failed (no sufficient working area),
- * we use normal (slow) single dword accesses */
- WARNING("couldn't use block writes, falling back to single memory accesses");
- }
- else if (retval == ERROR_FLASH_OPERATION_FAILED)
- {
- ERROR("flash writing failed with error code: 0x%x", retval);
- return ERROR_FLASH_OPERATION_FAILED;
- }
- }
- else
- {
- buffer += words_remaining * 2;
- address += words_remaining * 2;
- words_remaining = 0;
- }
- }
-
- while (words_remaining > 0)
- {
- target_write_u32(target, STM32_FLASH_CR, FLASH_PG);
- target_write_u16(target, address, *(u16*)(buffer + bytes_written));
-
- status = stm32x_wait_status_busy(bank, 5);
-
- if( status & FLASH_WRPRTERR )
- return ERROR_FLASH_OPERATION_FAILED;
- if( status & FLASH_PGERR )
- return ERROR_FLASH_OPERATION_FAILED;
-
- bytes_written += 2;
- words_remaining--;
- address += 2;
- }
-
- if (bytes_remaining)
- {
- u8 last_halfword[2] = {0xff, 0xff};
- int i = 0;
-
- while(bytes_remaining > 0)
- {
- last_halfword[i++] = *(buffer + bytes_written);
- bytes_remaining--;
- bytes_written++;
- }
-
- target_write_u32(target, STM32_FLASH_CR, FLASH_PG);
- target_write_u16(target, address, *(u16*)last_halfword);
-
- status = stm32x_wait_status_busy(bank, 5);
-
- if( status & FLASH_WRPRTERR )
- return ERROR_FLASH_OPERATION_FAILED;
- if( status & FLASH_PGERR )
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- target_write_u32(target, STM32_FLASH_CR, FLASH_LOCK);
-
- return ERROR_OK;
-}
-
-int stm32x_probe(struct flash_bank_s *bank)
-{
- target_t *target = bank->target;
- stm32x_flash_bank_t *stm32x_info = bank->driver_priv;
- int i;
- u16 num_sectors;
- u32 device_id;
-
- stm32x_info->probed = 0;
-
- /* read stm32 device id register */
- target_read_u32(target, 0xE0042000, &device_id);
- INFO( "device id = 0x%08x", device_id );
-
- if (!(device_id & 0x410))
- {
- WARNING( "Cannot identify target as a STM32 family." );
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- /* get flash size from target */
- target_read_u16(target, 0x1FFFF7E0, &num_sectors);
-
- /* check for early silicon rev A */
- if ((device_id >> 16) == 0 )
- {
- /* number of sectors incorrect on revA */
- WARNING( "STM32 Rev A Silicon detected, probe inaccurate - assuming 128k flash" );
- num_sectors = 128;
- }
-
- INFO( "flash size = %dkbytes", num_sectors );
-
- bank->base = 0x08000000;
- bank->size = num_sectors * 1024;
- bank->num_sectors = num_sectors;
- bank->sectors = malloc(sizeof(flash_sector_t) * num_sectors);
-
- for (i = 0; i < num_sectors; i++)
- {
- bank->sectors[i].offset = i * 1024;
- bank->sectors[i].size = 1024;
- bank->sectors[i].is_erased = -1;
- bank->sectors[i].is_protected = 1;
- }
-
- stm32x_info->probed = 1;
-
- return ERROR_OK;
-}
-
-int stm32x_auto_probe(struct flash_bank_s *bank)
-{
- stm32x_flash_bank_t *stm32x_info = bank->driver_priv;
- if (stm32x_info->probed)
- return ERROR_OK;
- return stm32x_probe(bank);
-}
-
-int stm32x_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- return ERROR_OK;
-}
-
-int stm32x_erase_check(struct flash_bank_s *bank)
-{
- return stm32x_blank_check(bank, 0, bank->num_sectors - 1);
-}
-
-int stm32x_info(struct flash_bank_s *bank, char *buf, int buf_size)
-{
- snprintf(buf, buf_size, "stm32x flash driver info" );
- return ERROR_OK;
-}
-
-int stm32x_handle_lock_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *bank;
- target_t *target = NULL;
- stm32x_flash_bank_t *stm32x_info = NULL;
-
- if (argc < 1)
- {
- command_print(cmd_ctx, "stm32x lock <bank>");
- return ERROR_OK;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!bank)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- stm32x_info = bank->driver_priv;
-
- target = bank->target;
-
- if (target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if (stm32x_erase_options(bank) != ERROR_OK)
- {
- command_print(cmd_ctx, "stm32x failed to erase options");
- return ERROR_OK;
- }
-
- /* set readout protection */
- stm32x_info->option_bytes.RDP = 0;
-
- if (stm32x_write_options(bank) != ERROR_OK)
- {
- command_print(cmd_ctx, "stm32x failed to lock device");
- return ERROR_OK;
- }
-
- command_print(cmd_ctx, "stm32x locked");
-
- return ERROR_OK;
-}
-
-int stm32x_handle_unlock_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *bank;
- target_t *target = NULL;
- stm32x_flash_bank_t *stm32x_info = NULL;
-
- if (argc < 1)
- {
- command_print(cmd_ctx, "stm32x unlock <bank>");
- return ERROR_OK;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!bank)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- stm32x_info = bank->driver_priv;
-
- target = bank->target;
-
- if (target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if (stm32x_erase_options(bank) != ERROR_OK)
- {
- command_print(cmd_ctx, "stm32x failed to unlock device");
- return ERROR_OK;
- }
-
- if (stm32x_write_options(bank) != ERROR_OK)
- {
- command_print(cmd_ctx, "stm32x failed to lock device");
- return ERROR_OK;
- }
-
- command_print(cmd_ctx, "stm32x unlocked");
-
- return ERROR_OK;
-}
-
-int stm32x_handle_options_read_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *bank;
- u32 optionbyte;
- target_t *target = NULL;
- stm32x_flash_bank_t *stm32x_info = NULL;
-
- if (argc < 1)
- {
- command_print(cmd_ctx, "stm32x options_read <bank>");
- return ERROR_OK;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!bank)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- stm32x_info = bank->driver_priv;
-
- target = bank->target;
-
- if (target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- target_read_u32(target, STM32_FLASH_OBR, &optionbyte);
- command_print(cmd_ctx, "Option Byte: 0x%x", optionbyte);
-
- if (buf_get_u32((u8*)&optionbyte, OPT_ERROR, 1))
- command_print(cmd_ctx, "Option Byte Complement Error");
-
- if (buf_get_u32((u8*)&optionbyte, OPT_READOUT, 1))
- command_print(cmd_ctx, "Readout Protection On");
- else
- command_print(cmd_ctx, "Readout Protection Off");
-
- if (buf_get_u32((u8*)&optionbyte, OPT_RDWDGSW, 1))
- command_print(cmd_ctx, "Software Watchdog");
- else
- command_print(cmd_ctx, "Hardware Watchdog");
-
- if (buf_get_u32((u8*)&optionbyte, OPT_RDRSTSTOP, 1))
- command_print(cmd_ctx, "Stop: No reset generated");
- else
- command_print(cmd_ctx, "Stop: Reset generated");
-
- if (buf_get_u32((u8*)&optionbyte, OPT_RDRSTSTDBY, 1))
- command_print(cmd_ctx, "Standby: No reset generated");
- else
- command_print(cmd_ctx, "Standby: Reset generated");
-
- return ERROR_OK;
-}
-
-int stm32x_handle_options_write_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *bank;
- target_t *target = NULL;
- stm32x_flash_bank_t *stm32x_info = NULL;
- u16 optionbyte = 0xF8;
-
- if (argc < 4)
- {
- command_print(cmd_ctx, "stm32x options_write <bank> <SWWDG|HWWDG> <RSTSTNDBY|NORSTSTNDBY> <RSTSTOP|NORSTSTOP>");
- return ERROR_OK;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!bank)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- stm32x_info = bank->driver_priv;
-
- target = bank->target;
-
- if (target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if (strcmp(args[1], "SWWDG") == 0)
- {
- optionbyte |= (1<<0);
- }
- else
- {
- optionbyte &= ~(1<<0);
- }
-
- if (strcmp(args[2], "NORSTSTNDBY") == 0)
- {
- optionbyte |= (1<<1);
- }
- else
- {
- optionbyte &= ~(1<<1);
- }
-
- if (strcmp(args[3], "NORSTSTOP") == 0)
- {
- optionbyte |= (1<<2);
- }
- else
- {
- optionbyte &= ~(1<<2);
- }
-
- if (stm32x_erase_options(bank) != ERROR_OK)
- {
- command_print(cmd_ctx, "stm32x failed to erase options");
- return ERROR_OK;
- }
-
- stm32x_info->option_bytes.user_options = optionbyte;
-
- if (stm32x_write_options(bank) != ERROR_OK)
- {
- command_print(cmd_ctx, "stm32x failed to write options");
- return ERROR_OK;
- }
-
- command_print(cmd_ctx, "stm32x write options complete");
-
- return ERROR_OK;
-}
-
-int stm32x_handle_mass_erase_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- target_t *target = NULL;
- stm32x_flash_bank_t *stm32x_info = NULL;
- flash_bank_t *bank;
- u32 status;
-
- if (argc < 1)
- {
- command_print(cmd_ctx, "stm32x mass_erase <bank>");
- return ERROR_OK;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!bank)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- stm32x_info = bank->driver_priv;
-
- target = bank->target;
-
- if (target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- /* unlock option flash registers */
- target_write_u32(target, STM32_FLASH_KEYR, KEY1);
- target_write_u32(target, STM32_FLASH_KEYR, KEY2);
-
- /* mass erase flash memory */
- target_write_u32(target, STM32_FLASH_CR, FLASH_MER);
- target_write_u32(target, STM32_FLASH_CR, FLASH_MER|FLASH_STRT);
-
- status = stm32x_wait_status_busy(bank, 10);
-
- target_write_u32(target, STM32_FLASH_CR, FLASH_LOCK);
-
- if( status & FLASH_WRPRTERR )
- {
- command_print(cmd_ctx, "stm32x device protected");
- return ERROR_OK;
- }
-
- if( status & FLASH_PGERR )
- {
- command_print(cmd_ctx, "stm32x device programming failed");
- return ERROR_OK;
- }
-
- command_print(cmd_ctx, "stm32x mass erase complete");
-
- return ERROR_OK;
-}
+/***************************************************************************
+ * Copyright (C) 2005 by Dominic Rath *
+ * Dominic.Rath@gmx.de *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "replacements.h"
+
+#include "stm32x.h"
+#include "flash.h"
+#include "target.h"
+#include "log.h"
+#include "armv7m.h"
+#include "algorithm.h"
+#include "binarybuffer.h"
+
+#include <stdlib.h>
+#include <string.h>
+
+int stm32x_register_commands(struct command_context_s *cmd_ctx);
+int stm32x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
+int stm32x_erase(struct flash_bank_s *bank, int first, int last);
+int stm32x_protect(struct flash_bank_s *bank, int set, int first, int last);
+int stm32x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
+int stm32x_probe(struct flash_bank_s *bank);
+int stm32x_auto_probe(struct flash_bank_s *bank);
+int stm32x_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int stm32x_protect_check(struct flash_bank_s *bank);
+int stm32x_erase_check(struct flash_bank_s *bank);
+int stm32x_info(struct flash_bank_s *bank, char *buf, int buf_size);
+
+int stm32x_handle_lock_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int stm32x_handle_unlock_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int stm32x_handle_options_read_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int stm32x_handle_options_write_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int stm32x_handle_mass_erase_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+
+flash_driver_t stm32x_flash =
+{
+ .name = "stm32x",
+ .register_commands = stm32x_register_commands,
+ .flash_bank_command = stm32x_flash_bank_command,
+ .erase = stm32x_erase,
+ .protect = stm32x_protect,
+ .write = stm32x_write,
+ .probe = stm32x_probe,
+ .auto_probe = stm32x_auto_probe,
+ .erase_check = stm32x_erase_check,
+ .protect_check = stm32x_protect_check,
+ .info = stm32x_info
+};
+
+int stm32x_register_commands(struct command_context_s *cmd_ctx)
+{
+ command_t *stm32x_cmd = register_command(cmd_ctx, NULL, "stm32x", NULL, COMMAND_ANY, "stm32x flash specific commands");
+
+ register_command(cmd_ctx, stm32x_cmd, "lock", stm32x_handle_lock_command, COMMAND_EXEC,
+ "lock device");
+ register_command(cmd_ctx, stm32x_cmd, "unlock", stm32x_handle_unlock_command, COMMAND_EXEC,
+ "unlock protected device");
+ register_command(cmd_ctx, stm32x_cmd, "mass_erase", stm32x_handle_mass_erase_command, COMMAND_EXEC,
+ "mass erase device");
+ register_command(cmd_ctx, stm32x_cmd, "options_read", stm32x_handle_options_read_command, COMMAND_EXEC,
+ "read device option bytes");
+ register_command(cmd_ctx, stm32x_cmd, "options_write", stm32x_handle_options_write_command, COMMAND_EXEC,
+ "write device option bytes");
+ return ERROR_OK;
+}
+
+/* flash bank stm32x <base> <size> 0 0 <target#>
+ */
+int stm32x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
+{
+ stm32x_flash_bank_t *stm32x_info;
+
+ if (argc < 6)
+ {
+ WARNING("incomplete flash_bank stm32x configuration");
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ stm32x_info = malloc(sizeof(stm32x_flash_bank_t));
+ bank->driver_priv = stm32x_info;
+
+ stm32x_info->write_algorithm = NULL;
+ stm32x_info->probed = 0;
+
+ return ERROR_OK;
+}
+
+u32 stm32x_get_flash_status(flash_bank_t *bank)
+{
+ target_t *target = bank->target;
+ u32 status;
+
+ target_read_u32(target, STM32_FLASH_SR, &status);
+
+ return status;
+}
+
+u32 stm32x_wait_status_busy(flash_bank_t *bank, int timeout)
+{
+ u32 status;
+
+ /* wait for busy to clear */
+ while (((status = stm32x_get_flash_status(bank)) & FLASH_BSY) && (timeout-- > 0))
+ {
+ DEBUG("status: 0x%x", status);
+ usleep(1000);
+ }
+
+ return status;
+}
+
+int stm32x_read_options(struct flash_bank_s *bank)
+{
+ u32 optiondata;
+ stm32x_flash_bank_t *stm32x_info = NULL;
+ target_t *target = bank->target;
+
+ stm32x_info = bank->driver_priv;
+
+ /* read current option bytes */
+ target_read_u32(target, STM32_FLASH_OBR, &optiondata);
+
+ stm32x_info->option_bytes.user_options = (u16)0xFFF8|((optiondata >> 2) & 0x07);
+ stm32x_info->option_bytes.RDP = (optiondata & (1 << OPT_READOUT)) ? 0xFFFF : 0x5AA5;
+
+ if (optiondata & (1 << OPT_READOUT))
+ INFO("Device Security Bit Set");
+
+ /* each bit refers to a 4bank protection */
+ target_read_u32(target, STM32_FLASH_WRPR, &optiondata);
+
+ stm32x_info->option_bytes.protection[0] = (u16)optiondata;
+ stm32x_info->option_bytes.protection[1] = (u16)(optiondata >> 8);
+ stm32x_info->option_bytes.protection[2] = (u16)(optiondata >> 16);
+ stm32x_info->option_bytes.protection[3] = (u16)(optiondata >> 24);
+
+ return ERROR_OK;
+}
+
+int stm32x_erase_options(struct flash_bank_s *bank)
+{
+ stm32x_flash_bank_t *stm32x_info = NULL;
+ target_t *target = bank->target;
+ u32 status;
+
+ stm32x_info = bank->driver_priv;
+
+ /* read current options */
+ stm32x_read_options(bank);
+
+ /* unlock flash registers */
+ target_write_u32(target, STM32_FLASH_KEYR, KEY1);
+ target_write_u32(target, STM32_FLASH_KEYR, KEY2);
+
+ /* unlock option flash registers */
+ target_write_u32(target, STM32_FLASH_OPTKEYR, KEY1);
+ target_write_u32(target, STM32_FLASH_OPTKEYR, KEY2);
+
+ /* erase option bytes */
+ target_write_u32(target, STM32_FLASH_CR, FLASH_OPTER|FLASH_OPTWRE);
+ target_write_u32(target, STM32_FLASH_CR, FLASH_OPTER|FLASH_STRT|FLASH_OPTWRE);
+
+ status = stm32x_wait_status_busy(bank, 10);
+
+ if( status & FLASH_WRPRTERR )
+ return ERROR_FLASH_OPERATION_FAILED;
+ if( status & FLASH_PGERR )
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ /* clear readout protection and complementary option bytes
+ * this will also force a device unlock if set */
+ stm32x_info->option_bytes.RDP = 0x5AA5;
+
+ return ERROR_OK;
+}
+
+int stm32x_write_options(struct flash_bank_s *bank)
+{
+ stm32x_flash_bank_t *stm32x_info = NULL;
+ target_t *target = bank->target;
+ u32 status;
+
+ stm32x_info = bank->driver_priv;
+
+ /* unlock flash registers */
+ target_write_u32(target, STM32_FLASH_KEYR, KEY1);
+ target_write_u32(target, STM32_FLASH_KEYR, KEY2);
+
+ /* unlock option flash registers */
+ target_write_u32(target, STM32_FLASH_OPTKEYR, KEY1);
+ target_write_u32(target, STM32_FLASH_OPTKEYR, KEY2);
+
+ /* program option bytes */
+ target_write_u32(target, STM32_FLASH_CR, FLASH_OPTPG|FLASH_OPTWRE);
+
+ /* write user option byte */
+ target_write_u16(target, STM32_OB_USER, stm32x_info->option_bytes.user_options);
+
+ status = stm32x_wait_status_busy(bank, 10);
+
+ if( status & FLASH_WRPRTERR )
+ return ERROR_FLASH_OPERATION_FAILED;
+ if( status & FLASH_PGERR )
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ /* write protection byte 1 */
+ target_write_u16(target, STM32_OB_WRP0, stm32x_info->option_bytes.protection[0]);
+
+ status = stm32x_wait_status_busy(bank, 10);
+
+ if( status & FLASH_WRPRTERR )
+ return ERROR_FLASH_OPERATION_FAILED;
+ if( status & FLASH_PGERR )
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ /* write protection byte 2 */
+ target_write_u16(target, STM32_OB_WRP1, stm32x_info->option_bytes.protection[1]);
+
+ status = stm32x_wait_status_busy(bank, 10);
+
+ if( status & FLASH_WRPRTERR )
+ return ERROR_FLASH_OPERATION_FAILED;
+ if( status & FLASH_PGERR )
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ /* write protection byte 3 */
+ target_write_u16(target, STM32_OB_WRP2, stm32x_info->option_bytes.protection[2]);
+
+ status = stm32x_wait_status_busy(bank, 10);
+
+ if( status & FLASH_WRPRTERR )
+ return ERROR_FLASH_OPERATION_FAILED;
+ if( status & FLASH_PGERR )
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ /* write protection byte 4 */
+ target_write_u16(target, STM32_OB_WRP3, stm32x_info->option_bytes.protection[3]);
+
+ status = stm32x_wait_status_busy(bank, 10);
+
+ if( status & FLASH_WRPRTERR )
+ return ERROR_FLASH_OPERATION_FAILED;
+ if( status & FLASH_PGERR )
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ /* write readout protection bit */
+ target_write_u16(target, STM32_OB_RDP, stm32x_info->option_bytes.RDP);
+
+ status = stm32x_wait_status_busy(bank, 10);
+
+ if( status & FLASH_WRPRTERR )
+ return ERROR_FLASH_OPERATION_FAILED;
+ if( status & FLASH_PGERR )
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ target_write_u32(target, STM32_FLASH_CR, FLASH_LOCK);
+
+ return ERROR_OK;
+}
+
+int stm32x_blank_check(struct flash_bank_s *bank, int first, int last)
+{
+ target_t *target = bank->target;
+ u8 *buffer;
+ int i;
+ int nBytes;
+
+ if ((first < 0) || (last > bank->num_sectors))
+ return ERROR_FLASH_SECTOR_INVALID;
+
+ if (target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ buffer = malloc(256);
+
+ for (i = first; i <= last; i++)
+ {
+ bank->sectors[i].is_erased = 1;
+
+ target->type->read_memory(target, bank->base + bank->sectors[i].offset, 4, 256/4, buffer);
+
+ for (nBytes = 0; nBytes < 256; nBytes++)
+ {
+ if (buffer[nBytes] != 0xFF)
+ {
+ bank->sectors[i].is_erased = 0;
+ break;
+ }
+ }
+ }
+
+ free(buffer);
+
+ return ERROR_OK;
+}
+
+int stm32x_protect_check(struct flash_bank_s *bank)
+{
+ target_t *target = bank->target;
+
+ u32 protection;
+ int i, s;
+ int num_bits;
+
+ if (target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ /* each bit refers to a 4bank protection */
+ target_read_u32(target, STM32_FLASH_WRPR, &protection);
+
+ /* each protection bit is for 4 1K pages */
+ num_bits = (bank->num_sectors / 4);
+
+ for (i = 0; i < num_bits; i++)
+ {
+ int set = 1;
+
+ if( protection & (1 << i))
+ set = 0;
+
+ for (s = 0; s < 4; s++)
+ bank->sectors[(i * 4) + s].is_protected = set;
+ }
+
+ return ERROR_OK;
+}
+
+int stm32x_erase(struct flash_bank_s *bank, int first, int last)
+{
+ target_t *target = bank->target;
+
+ int i;
+ u32 status;
+
+ /* unlock flash registers */
+ target_write_u32(target, STM32_FLASH_KEYR, KEY1);
+ target_write_u32(target, STM32_FLASH_KEYR, KEY2);
+
+ for (i = first; i <= last; i++)
+ {
+ target_write_u32(target, STM32_FLASH_CR, FLASH_PER);
+ target_write_u32(target, STM32_FLASH_AR, bank->base + bank->sectors[i].offset);
+ target_write_u32(target, STM32_FLASH_CR, FLASH_PER|FLASH_STRT);
+
+ status = stm32x_wait_status_busy(bank, 10);
+
+ if( status & FLASH_WRPRTERR )
+ return ERROR_FLASH_OPERATION_FAILED;
+ if( status & FLASH_PGERR )
+ return ERROR_FLASH_OPERATION_FAILED;
+ bank->sectors[i].is_erased = 1;
+ }
+
+ target_write_u32(target, STM32_FLASH_CR, FLASH_LOCK);
+
+ return ERROR_OK;
+}
+
+int stm32x_protect(struct flash_bank_s *bank, int set, int first, int last)
+{
+ stm32x_flash_bank_t *stm32x_info = NULL;
+ target_t *target = bank->target;
+ u16 prot_reg[4] = {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF};
+ int i, reg, bit;
+ int status;
+ u32 protection;
+
+ stm32x_info = bank->driver_priv;
+
+ if (target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if ((first && (first % 4)) || ((last + 1) && (last + 1) % 4))
+ {
+ WARNING("sector start/end incorrect - stm32 has 4K sector protection");
+ return ERROR_FLASH_SECTOR_INVALID;
+ }
+
+ /* each bit refers to a 4bank protection */
+ target_read_u32(target, STM32_FLASH_WRPR, &protection);
+
+ prot_reg[0] = (u16)protection;
+ prot_reg[1] = (u16)(protection >> 8);
+ prot_reg[2] = (u16)(protection >> 16);
+ prot_reg[3] = (u16)(protection >> 24);
+
+ for (i = first; i <= last; i++)
+ {
+ reg = (i / 4) / 8;
+ bit = (i / 4) - (reg * 8);
+
+ if( set )
+ prot_reg[reg] &= ~(1 << bit);
+ else
+ prot_reg[reg] |= (1 << bit);
+ }
+
+ if ((status = stm32x_erase_options(bank)) != ERROR_OK)
+ return status;
+
+ stm32x_info->option_bytes.protection[0] = prot_reg[0];
+ stm32x_info->option_bytes.protection[1] = prot_reg[1];
+ stm32x_info->option_bytes.protection[2] = prot_reg[2];
+ stm32x_info->option_bytes.protection[3] = prot_reg[3];
+
+ return stm32x_write_options(bank);
+}
+
+int stm32x_write_block(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
+{
+ stm32x_flash_bank_t *stm32x_info = bank->driver_priv;
+ target_t *target = bank->target;
+ u32 buffer_size = 8192;
+ working_area_t *source;
+ u32 address = bank->base + offset;
+ reg_param_t reg_params[4];
+ armv7m_algorithm_t armv7m_info;
+ int retval = ERROR_OK;
+
+ u8 stm32x_flash_write_code[] = {
+ /* write: */
+ 0xDF, 0xF8, 0x24, 0x40, /* ldr r4, STM32_FLASH_CR */
+ 0x09, 0x4D, /* ldr r5, STM32_FLASH_SR */
+ 0x4F, 0xF0, 0x01, 0x03, /* mov r3, #1 */
+ 0x23, 0x60, /* str r3, [r4, #0] */
+ 0x30, 0xF8, 0x02, 0x3B, /* ldrh r3, [r0], #2 */
+ 0x21, 0xF8, 0x02, 0x3B, /* strh r3, [r1], #2 */
+ /* busy: */
+ 0x2B, 0x68, /* ldr r3, [r5, #0] */
+ 0x13, 0xF0, 0x01, 0x0F, /* tst r3, #0x01 */
+ 0xFB, 0xD0, /* beq busy */
+ 0x13, 0xF0, 0x14, 0x0F, /* tst r3, #0x14 */
+ 0x01, 0xD1, /* bne exit */
+ 0x01, 0x3A, /* subs r2, r2, #1 */
+ 0xED, 0xD1, /* bne write */
+ /* exit: */
+ 0xFE, 0xE7, /* b exit */
+ 0x10, 0x20, 0x02, 0x40, /* STM32_FLASH_CR: .word 0x40022010 */
+ 0x0C, 0x20, 0x02, 0x40 /* STM32_FLASH_SR: .word 0x4002200C */
+ };
+
+ /* flash write code */
+ if (target_alloc_working_area(target, sizeof(stm32x_flash_write_code), &stm32x_info->write_algorithm) != ERROR_OK)
+ {
+ WARNING("no working area available, can't do block memory writes");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ };
+
+ target_write_buffer(target, stm32x_info->write_algorithm->address, sizeof(stm32x_flash_write_code), stm32x_flash_write_code);
+
+ /* memory buffer */
+ while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK)
+ {
+ buffer_size /= 2;
+ if (buffer_size <= 256)
+ {
+ /* if we already allocated the writing code, but failed to get a buffer, free the algorithm */
+ if (stm32x_info->write_algorithm)
+ target_free_working_area(target, stm32x_info->write_algorithm);
+
+ WARNING("no large enough working area available, can't do block memory writes");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+ };
+
+ armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
+ armv7m_info.core_mode = ARMV7M_MODE_ANY;
+ armv7m_info.core_state = ARMV7M_STATE_THUMB;
+
+ init_reg_param(&reg_params[0], "r0", 32, PARAM_OUT);
+ init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT);
+ init_reg_param(&reg_params[2], "r2", 32, PARAM_OUT);
+ init_reg_param(&reg_params[3], "r3", 32, PARAM_IN);
+
+ while (count > 0)
+ {
+ u32 thisrun_count = (count > (buffer_size / 2)) ? (buffer_size / 2) : count;
+
+ target_write_buffer(target, source->address, thisrun_count * 2, buffer);
+
+ buf_set_u32(reg_params[0].value, 0, 32, source->address);
+ buf_set_u32(reg_params[1].value, 0, 32, address);
+ buf_set_u32(reg_params[2].value, 0, 32, thisrun_count);
+
+ if ((retval = target->type->run_algorithm(target, 0, NULL, 4, reg_params, stm32x_info->write_algorithm->address, \
+ stm32x_info->write_algorithm->address + (sizeof(stm32x_flash_write_code) - 10), 10000, &armv7m_info)) != ERROR_OK)
+ {
+ ERROR("error executing str7x flash write algorithm");
+ break;
+ }
+
+ if (buf_get_u32(reg_params[3].value, 0, 32) & 0x14)
+ {
+ retval = ERROR_FLASH_OPERATION_FAILED;
+ break;
+ }
+
+ buffer += thisrun_count * 2;
+ address += thisrun_count * 2;
+ count -= thisrun_count;
+ }
+
+ target_free_working_area(target, source);
+ target_free_working_area(target, stm32x_info->write_algorithm);
+
+ destroy_reg_param(&reg_params[0]);
+ destroy_reg_param(&reg_params[1]);
+ destroy_reg_param(&reg_params[2]);
+ destroy_reg_param(&reg_params[3]);
+
+ return retval;
+}
+
+int stm32x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
+{
+ target_t *target = bank->target;
+ u32 words_remaining = (count / 2);
+ u32 bytes_remaining = (count & 0x00000001);
+ u32 address = bank->base + offset;
+ u32 bytes_written = 0;
+ u8 status;
+ u32 retval;
+
+ if (offset & 0x1)
+ {
+ WARNING("offset 0x%x breaks required 2-byte alignment", offset);
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ }
+
+ /* unlock flash registers */
+ target_write_u32(target, STM32_FLASH_KEYR, KEY1);
+ target_write_u32(target, STM32_FLASH_KEYR, KEY2);
+
+ /* multiple half words (2-byte) to be programmed? */
+ if (words_remaining > 0)
+ {
+ /* try using a block write */
+ if ((retval = stm32x_write_block(bank, buffer, offset, words_remaining)) != ERROR_OK)
+ {
+ if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
+ {
+ /* if block write failed (no sufficient working area),
+ * we use normal (slow) single dword accesses */
+ WARNING("couldn't use block writes, falling back to single memory accesses");
+ }
+ else if (retval == ERROR_FLASH_OPERATION_FAILED)
+ {
+ ERROR("flash writing failed with error code: 0x%x", retval);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ }
+ else
+ {
+ buffer += words_remaining * 2;
+ address += words_remaining * 2;
+ words_remaining = 0;
+ }
+ }
+
+ while (words_remaining > 0)
+ {
+ target_write_u32(target, STM32_FLASH_CR, FLASH_PG);
+ target_write_u16(target, address, *(u16*)(buffer + bytes_written));
+
+ status = stm32x_wait_status_busy(bank, 5);
+
+ if( status & FLASH_WRPRTERR )
+ return ERROR_FLASH_OPERATION_FAILED;
+ if( status & FLASH_PGERR )
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ bytes_written += 2;
+ words_remaining--;
+ address += 2;
+ }
+
+ if (bytes_remaining)
+ {
+ u8 last_halfword[2] = {0xff, 0xff};
+ int i = 0;
+
+ while(bytes_remaining > 0)
+ {
+ last_halfword[i++] = *(buffer + bytes_written);
+ bytes_remaining--;
+ bytes_written++;
+ }
+
+ target_write_u32(target, STM32_FLASH_CR, FLASH_PG);
+ target_write_u16(target, address, *(u16*)last_halfword);
+
+ status = stm32x_wait_status_busy(bank, 5);
+
+ if( status & FLASH_WRPRTERR )
+ return ERROR_FLASH_OPERATION_FAILED;
+ if( status & FLASH_PGERR )
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ target_write_u32(target, STM32_FLASH_CR, FLASH_LOCK);
+
+ return ERROR_OK;
+}
+
+int stm32x_probe(struct flash_bank_s *bank)
+{
+ target_t *target = bank->target;
+ stm32x_flash_bank_t *stm32x_info = bank->driver_priv;
+ int i;
+ u16 num_sectors;
+ u32 device_id;
+
+ stm32x_info->probed = 0;
+
+ /* read stm32 device id register */
+ target_read_u32(target, 0xE0042000, &device_id);
+ INFO( "device id = 0x%08x", device_id );
+
+ if (!(device_id & 0x410))
+ {
+ WARNING( "Cannot identify target as a STM32 family." );
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ /* get flash size from target */
+ target_read_u16(target, 0x1FFFF7E0, &num_sectors);
+
+ /* check for early silicon rev A */
+ if ((device_id >> 16) == 0 )
+ {
+ /* number of sectors incorrect on revA */
+ WARNING( "STM32 Rev A Silicon detected, probe inaccurate - assuming 128k flash" );
+ num_sectors = 128;
+ }
+
+ INFO( "flash size = %dkbytes", num_sectors );
+
+ bank->base = 0x08000000;
+ bank->size = num_sectors * 1024;
+ bank->num_sectors = num_sectors;
+ bank->sectors = malloc(sizeof(flash_sector_t) * num_sectors);
+
+ for (i = 0; i < num_sectors; i++)
+ {
+ bank->sectors[i].offset = i * 1024;
+ bank->sectors[i].size = 1024;
+ bank->sectors[i].is_erased = -1;
+ bank->sectors[i].is_protected = 1;
+ }
+
+ stm32x_info->probed = 1;
+
+ return ERROR_OK;
+}
+
+int stm32x_auto_probe(struct flash_bank_s *bank)
+{
+ stm32x_flash_bank_t *stm32x_info = bank->driver_priv;
+ if (stm32x_info->probed)
+ return ERROR_OK;
+ return stm32x_probe(bank);
+}
+
+int stm32x_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ return ERROR_OK;
+}
+
+int stm32x_erase_check(struct flash_bank_s *bank)
+{
+ return stm32x_blank_check(bank, 0, bank->num_sectors - 1);
+}
+
+int stm32x_info(struct flash_bank_s *bank, char *buf, int buf_size)
+{
+ snprintf(buf, buf_size, "stm32x flash driver info" );
+ return ERROR_OK;
+}
+
+int stm32x_handle_lock_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *bank;
+ target_t *target = NULL;
+ stm32x_flash_bank_t *stm32x_info = NULL;
+
+ if (argc < 1)
+ {
+ command_print(cmd_ctx, "stm32x lock <bank>");
+ return ERROR_OK;
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!bank)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ stm32x_info = bank->driver_priv;
+
+ target = bank->target;
+
+ if (target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (stm32x_erase_options(bank) != ERROR_OK)
+ {
+ command_print(cmd_ctx, "stm32x failed to erase options");
+ return ERROR_OK;
+ }
+
+ /* set readout protection */
+ stm32x_info->option_bytes.RDP = 0;
+
+ if (stm32x_write_options(bank) != ERROR_OK)
+ {
+ command_print(cmd_ctx, "stm32x failed to lock device");
+ return ERROR_OK;
+ }
+
+ command_print(cmd_ctx, "stm32x locked");
+
+ return ERROR_OK;
+}
+
+int stm32x_handle_unlock_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *bank;
+ target_t *target = NULL;
+ stm32x_flash_bank_t *stm32x_info = NULL;
+
+ if (argc < 1)
+ {
+ command_print(cmd_ctx, "stm32x unlock <bank>");
+ return ERROR_OK;
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!bank)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ stm32x_info = bank->driver_priv;
+
+ target = bank->target;
+
+ if (target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (stm32x_erase_options(bank) != ERROR_OK)
+ {
+ command_print(cmd_ctx, "stm32x failed to unlock device");
+ return ERROR_OK;
+ }
+
+ if (stm32x_write_options(bank) != ERROR_OK)
+ {
+ command_print(cmd_ctx, "stm32x failed to lock device");
+ return ERROR_OK;
+ }
+
+ command_print(cmd_ctx, "stm32x unlocked");
+
+ return ERROR_OK;
+}
+
+int stm32x_handle_options_read_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *bank;
+ u32 optionbyte;
+ target_t *target = NULL;
+ stm32x_flash_bank_t *stm32x_info = NULL;
+
+ if (argc < 1)
+ {
+ command_print(cmd_ctx, "stm32x options_read <bank>");
+ return ERROR_OK;
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!bank)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ stm32x_info = bank->driver_priv;
+
+ target = bank->target;
+
+ if (target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ target_read_u32(target, STM32_FLASH_OBR, &optionbyte);
+ command_print(cmd_ctx, "Option Byte: 0x%x", optionbyte);
+
+ if (buf_get_u32((u8*)&optionbyte, OPT_ERROR, 1))
+ command_print(cmd_ctx, "Option Byte Complement Error");
+
+ if (buf_get_u32((u8*)&optionbyte, OPT_READOUT, 1))
+ command_print(cmd_ctx, "Readout Protection On");
+ else
+ command_print(cmd_ctx, "Readout Protection Off");
+
+ if (buf_get_u32((u8*)&optionbyte, OPT_RDWDGSW, 1))
+ command_print(cmd_ctx, "Software Watchdog");
+ else
+ command_print(cmd_ctx, "Hardware Watchdog");
+
+ if (buf_get_u32((u8*)&optionbyte, OPT_RDRSTSTOP, 1))
+ command_print(cmd_ctx, "Stop: No reset generated");
+ else
+ command_print(cmd_ctx, "Stop: Reset generated");
+
+ if (buf_get_u32((u8*)&optionbyte, OPT_RDRSTSTDBY, 1))
+ command_print(cmd_ctx, "Standby: No reset generated");
+ else
+ command_print(cmd_ctx, "Standby: Reset generated");
+
+ return ERROR_OK;
+}
+
+int stm32x_handle_options_write_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *bank;
+ target_t *target = NULL;
+ stm32x_flash_bank_t *stm32x_info = NULL;
+ u16 optionbyte = 0xF8;
+
+ if (argc < 4)
+ {
+ command_print(cmd_ctx, "stm32x options_write <bank> <SWWDG|HWWDG> <RSTSTNDBY|NORSTSTNDBY> <RSTSTOP|NORSTSTOP>");
+ return ERROR_OK;
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!bank)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ stm32x_info = bank->driver_priv;
+
+ target = bank->target;
+
+ if (target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (strcmp(args[1], "SWWDG") == 0)
+ {
+ optionbyte |= (1<<0);
+ }
+ else
+ {
+ optionbyte &= ~(1<<0);
+ }
+
+ if (strcmp(args[2], "NORSTSTNDBY") == 0)
+ {
+ optionbyte |= (1<<1);
+ }
+ else
+ {
+ optionbyte &= ~(1<<1);
+ }
+
+ if (strcmp(args[3], "NORSTSTOP") == 0)
+ {
+ optionbyte |= (1<<2);
+ }
+ else
+ {
+ optionbyte &= ~(1<<2);
+ }
+
+ if (stm32x_erase_options(bank) != ERROR_OK)
+ {
+ command_print(cmd_ctx, "stm32x failed to erase options");
+ return ERROR_OK;
+ }
+
+ stm32x_info->option_bytes.user_options = optionbyte;
+
+ if (stm32x_write_options(bank) != ERROR_OK)
+ {
+ command_print(cmd_ctx, "stm32x failed to write options");
+ return ERROR_OK;
+ }
+
+ command_print(cmd_ctx, "stm32x write options complete");
+
+ return ERROR_OK;
+}
+
+int stm32x_handle_mass_erase_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ target_t *target = NULL;
+ stm32x_flash_bank_t *stm32x_info = NULL;
+ flash_bank_t *bank;
+ u32 status;
+
+ if (argc < 1)
+ {
+ command_print(cmd_ctx, "stm32x mass_erase <bank>");
+ return ERROR_OK;
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!bank)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ stm32x_info = bank->driver_priv;
+
+ target = bank->target;
+
+ if (target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ /* unlock option flash registers */
+ target_write_u32(target, STM32_FLASH_KEYR, KEY1);
+ target_write_u32(target, STM32_FLASH_KEYR, KEY2);
+
+ /* mass erase flash memory */
+ target_write_u32(target, STM32_FLASH_CR, FLASH_MER);
+ target_write_u32(target, STM32_FLASH_CR, FLASH_MER|FLASH_STRT);
+
+ status = stm32x_wait_status_busy(bank, 10);
+
+ target_write_u32(target, STM32_FLASH_CR, FLASH_LOCK);
+
+ if( status & FLASH_WRPRTERR )
+ {
+ command_print(cmd_ctx, "stm32x device protected");
+ return ERROR_OK;
+ }
+
+ if( status & FLASH_PGERR )
+ {
+ command_print(cmd_ctx, "stm32x device programming failed");
+ return ERROR_OK;
+ }
+
+ command_print(cmd_ctx, "stm32x mass erase complete");
+
+ return ERROR_OK;
+}
diff --git a/src/flash/str7x.c b/src/flash/str7x.c
index 21122d0d..3574a897 100644
--- a/src/flash/str7x.c
+++ b/src/flash/str7x.c
@@ -1,804 +1,804 @@
-/***************************************************************************
- * Copyright (C) 2005 by Dominic Rath *
- * Dominic.Rath@gmx.de *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- ***************************************************************************/
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "replacements.h"
-
-#include "str7x.h"
-#include "flash.h"
-#include "target.h"
-#include "log.h"
-#include "armv4_5.h"
-#include "algorithm.h"
-#include "binarybuffer.h"
-
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-str7x_mem_layout_t mem_layout[] = {
- {0x00000000, 0x02000, 0x01},
- {0x00002000, 0x02000, 0x02},
- {0x00004000, 0x02000, 0x04},
- {0x00006000, 0x02000, 0x08},
- {0x00008000, 0x08000, 0x10},
- {0x00010000, 0x10000, 0x20},
- {0x00020000, 0x10000, 0x40},
- {0x00030000, 0x10000, 0x80},
- {0x000C0000, 0x02000, 0x10000},
- {0x000C2000, 0x02000, 0x20000},
-};
-
-int str7x_register_commands(struct command_context_s *cmd_ctx);
-int str7x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
-int str7x_erase(struct flash_bank_s *bank, int first, int last);
-int str7x_protect(struct flash_bank_s *bank, int set, int first, int last);
-int str7x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
-int str7x_probe(struct flash_bank_s *bank);
-int str7x_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int str7x_protect_check(struct flash_bank_s *bank);
-int str7x_erase_check(struct flash_bank_s *bank);
-int str7x_info(struct flash_bank_s *bank, char *buf, int buf_size);
-
-int str7x_handle_disable_jtag_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-
-flash_driver_t str7x_flash =
-{
- .name = "str7x",
- .register_commands = str7x_register_commands,
- .flash_bank_command = str7x_flash_bank_command,
- .erase = str7x_erase,
- .protect = str7x_protect,
- .write = str7x_write,
- .probe = str7x_probe,
- .auto_probe = str7x_probe,
- .erase_check = str7x_erase_check,
- .protect_check = str7x_protect_check,
- .info = str7x_info
-};
-
-int str7x_register_commands(struct command_context_s *cmd_ctx)
-{
- command_t *str7x_cmd = register_command(cmd_ctx, NULL, "str7x", NULL, COMMAND_ANY, NULL);
-
- register_command(cmd_ctx, str7x_cmd, "disable_jtag", str7x_handle_disable_jtag_command, COMMAND_EXEC,
- "disable jtag access");
-
- return ERROR_OK;
-}
-
-int str7x_get_flash_adr(struct flash_bank_s *bank, u32 reg)
-{
- return (bank->base | reg);
-}
-
-int str7x_build_block_list(struct flash_bank_s *bank)
-{
- str7x_flash_bank_t *str7x_info = bank->driver_priv;
-
- int i;
- int num_sectors = 0, b0_sectors = 0, b1_sectors = 0;
-
- switch (bank->size)
- {
- case 16 * 1024:
- b0_sectors = 2;
- break;
- case 64 * 1024:
- b0_sectors = 5;
- break;
- case 128 * 1024:
- b0_sectors = 6;
- break;
- case 256 * 1024:
- b0_sectors = 8;
- break;
- default:
- ERROR("BUG: unknown bank->size encountered");
- exit(-1);
- }
-
- if( str7x_info->bank1 == 1 )
- {
- b1_sectors += 2;
- }
-
- num_sectors = b0_sectors + b1_sectors;
-
- bank->num_sectors = num_sectors;
- bank->sectors = malloc(sizeof(flash_sector_t) * num_sectors);
- str7x_info->sector_bits = malloc(sizeof(u32) * num_sectors);
- str7x_info->sector_bank = malloc(sizeof(u32) * num_sectors);
-
- num_sectors = 0;
-
- for (i = 0; i < b0_sectors; i++)
- {
- bank->sectors[num_sectors].offset = mem_layout[i].sector_start;
- bank->sectors[num_sectors].size = mem_layout[i].sector_size;
- bank->sectors[num_sectors].is_erased = -1;
- bank->sectors[num_sectors].is_protected = 1;
- str7x_info->sector_bank[num_sectors] = 0;
- str7x_info->sector_bits[num_sectors++] = mem_layout[i].sector_bit;
- }
-
- if (b1_sectors)
- {
- for (i = 8; i < 10; i++)
- {
- bank->sectors[num_sectors].offset = mem_layout[i].sector_start;
- bank->sectors[num_sectors].size = mem_layout[i].sector_size;
- bank->sectors[num_sectors].is_erased = -1;
- bank->sectors[num_sectors].is_protected = 1;
- str7x_info->sector_bank[num_sectors] = 1;
- str7x_info->sector_bits[num_sectors++] = mem_layout[i].sector_bit;
- }
- }
-
- return ERROR_OK;
-}
-
-/* flash bank str7x <base> <size> 0 0 <target#> <str71_variant>
- */
-int str7x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
-{
- str7x_flash_bank_t *str7x_info;
-
- if (argc < 7)
- {
- WARNING("incomplete flash_bank str7x configuration");
- return ERROR_FLASH_BANK_INVALID;
- }
-
- str7x_info = malloc(sizeof(str7x_flash_bank_t));
- bank->driver_priv = str7x_info;
-
- /* set default bits for str71x flash */
- str7x_info->bank1 = 1;
- str7x_info->busy_bits = (FLASH_LOCK|FLASH_BSYA1|FLASH_BSYA0);
- str7x_info->disable_bit = (1<<1);
-
- if (strcmp(args[6], "STR71x") == 0)
- {
- if (bank->base != 0x40000000)
- {
- WARNING("overriding flash base address for STR71x device with 0x40000000");
- bank->base = 0x40000000;
- }
- }
- else if (strcmp(args[6], "STR73x") == 0)
- {
- str7x_info->bank1 = 0;
- str7x_info->busy_bits = (FLASH_LOCK|FLASH_BSYA0);
-
- if (bank->base != 0x80000000)
- {
- WARNING("overriding flash base address for STR73x device with 0x80000000");
- bank->base = 0x80000000;
- }
- }
- else if (strcmp(args[6], "STR75x") == 0)
- {
- str7x_info->disable_bit = (1<<0);
-
- if (bank->base != 0x20000000)
- {
- WARNING("overriding flash base address for STR75x device with 0x20000000");
- bank->base = 0x20000000;
- }
- }
- else
- {
- ERROR("unknown STR7x variant: '%s'", args[6]);
- free(str7x_info);
- return ERROR_FLASH_BANK_INVALID;
- }
-
- str7x_build_block_list(bank);
-
- str7x_info->write_algorithm = NULL;
-
- return ERROR_OK;
-}
-
-u32 str7x_status(struct flash_bank_s *bank)
-{
- target_t *target = bank->target;
- u32 retval;
-
- target_read_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), &retval);
-
- return retval;
-}
-
-u32 str7x_result(struct flash_bank_s *bank)
-{
- target_t *target = bank->target;
- u32 retval;
-
- target_read_u32(target, str7x_get_flash_adr(bank, FLASH_ER), &retval);
-
- return retval;
-}
-
-int str7x_blank_check(struct flash_bank_s *bank, int first, int last)
-{
- target_t *target = bank->target;
- u8 *buffer;
- int i;
- int nBytes;
-
- if ((first < 0) || (last > bank->num_sectors))
- return ERROR_FLASH_SECTOR_INVALID;
-
- if (bank->target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- buffer = malloc(256);
-
- for (i = first; i <= last; i++)
- {
- bank->sectors[i].is_erased = 1;
-
- target->type->read_memory(target, bank->base + bank->sectors[i].offset, 4, 256/4, buffer);
-
- for (nBytes = 0; nBytes < 256; nBytes++)
- {
- if (buffer[nBytes] != 0xFF)
- {
- bank->sectors[i].is_erased = 0;
- break;
- }
- }
- }
-
- free(buffer);
-
- return ERROR_OK;
-}
-
-int str7x_protect_check(struct flash_bank_s *bank)
-{
- str7x_flash_bank_t *str7x_info = bank->driver_priv;
- target_t *target = bank->target;
-
- int i;
- u32 retval;
-
- if (bank->target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- target_read_u32(target, str7x_get_flash_adr(bank, FLASH_NVWPAR), &retval);
-
- for (i = 0; i < bank->num_sectors; i++)
- {
- if (retval & str7x_info->sector_bits[i])
- bank->sectors[i].is_protected = 0;
- else
- bank->sectors[i].is_protected = 1;
- }
-
- return ERROR_OK;
-}
-
-int str7x_erase(struct flash_bank_s *bank, int first, int last)
-{
- str7x_flash_bank_t *str7x_info = bank->driver_priv;
- target_t *target = bank->target;
-
- int i;
- u32 cmd;
- u32 retval;
- u32 b0_sectors = 0, b1_sectors = 0;
-
- for (i = first; i <= last; i++)
- {
- if (str7x_info->sector_bank[i] == 0)
- b0_sectors |= str7x_info->sector_bits[i];
- else if (str7x_info->sector_bank[i] == 1)
- b1_sectors |= str7x_info->sector_bits[i];
- else
- ERROR("BUG: str7x_info->sector_bank[i] neither 0 nor 1 (%i)", str7x_info->sector_bank[i]);
- }
-
- if (b0_sectors)
- {
- DEBUG("b0_sectors: 0x%x", b0_sectors);
-
- /* clear FLASH_ER register */
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_ER), 0x0);
-
- cmd = FLASH_SER;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
-
- cmd = b0_sectors;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR1), cmd);
-
- cmd = FLASH_SER|FLASH_WMS;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
-
- while (((retval = str7x_status(bank)) & str7x_info->busy_bits)){
- usleep(1000);
- }
-
- retval = str7x_result(bank);
-
- if (retval)
- {
- ERROR("error erasing flash bank, FLASH_ER: 0x%x", retval);
- return ERROR_FLASH_OPERATION_FAILED;
- }
- }
-
- if (b1_sectors)
- {
- DEBUG("b1_sectors: 0x%x", b1_sectors);
-
- /* clear FLASH_ER register */
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_ER), 0x0);
-
- cmd = FLASH_SER;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
-
- cmd = b1_sectors;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR1), cmd);
-
- cmd = FLASH_SER|FLASH_WMS;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
-
- while (((retval = str7x_status(bank)) & str7x_info->busy_bits)){
- usleep(1000);
- }
-
- retval = str7x_result(bank);
-
- if (retval)
- {
- ERROR("error erasing flash bank, FLASH_ER: 0x%x", retval);
- return ERROR_FLASH_OPERATION_FAILED;
- }
- }
-
- for (i = first; i <= last; i++)
- bank->sectors[i].is_erased = 1;
-
- return ERROR_OK;
-}
-
-int str7x_protect(struct flash_bank_s *bank, int set, int first, int last)
-{
- str7x_flash_bank_t *str7x_info = bank->driver_priv;
- target_t *target = bank->target;
- int i;
- u32 cmd;
- u32 retval;
- u32 protect_blocks;
-
- if (bank->target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- protect_blocks = 0xFFFFFFFF;
-
- if (set)
- {
- for (i = first; i <= last; i++)
- protect_blocks &= ~(str7x_info->sector_bits[i]);
- }
-
- /* clear FLASH_ER register */
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_ER), 0x0);
-
- cmd = FLASH_SPR;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
-
- cmd = str7x_get_flash_adr(bank, FLASH_NVWPAR);
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), cmd);
-
- cmd = protect_blocks;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_DR0), cmd);
-
- cmd = FLASH_SPR|FLASH_WMS;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
-
- while (((retval = str7x_status(bank)) & str7x_info->busy_bits)){
- usleep(1000);
- }
-
- retval = str7x_result(bank);
-
- DEBUG("retval: 0x%8.8x", retval);
-
- if (retval & FLASH_ERER)
- return ERROR_FLASH_SECTOR_NOT_ERASED;
- else if (retval & FLASH_WPF)
- return ERROR_FLASH_OPERATION_FAILED;
-
- return ERROR_OK;
-}
-
-int str7x_write_block(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
-{
- str7x_flash_bank_t *str7x_info = bank->driver_priv;
- target_t *target = bank->target;
- u32 buffer_size = 8192;
- working_area_t *source;
- u32 address = bank->base + offset;
- reg_param_t reg_params[6];
- armv4_5_algorithm_t armv4_5_info;
- int retval = ERROR_OK;
-
- u32 str7x_flash_write_code[] = {
- /* write: */
- 0xe3a04201, /* mov r4, #0x10000000 */
- 0xe5824000, /* str r4, [r2, #0x0] */
- 0xe5821010, /* str r1, [r2, #0x10] */
- 0xe4904004, /* ldr r4, [r0], #4 */
- 0xe5824008, /* str r4, [r2, #0x8] */
- 0xe4904004, /* ldr r4, [r0], #4 */
- 0xe582400c, /* str r4, [r2, #0xc] */
- 0xe3a04209, /* mov r4, #0x90000000 */
- 0xe5824000, /* str r4, [r2, #0x0] */
- /* busy: */
- 0xe5924000, /* ldr r4, [r2, #0x0] */
- 0xe1140005, /* tst r4, r5 */
- 0x1afffffc, /* bne busy */
- 0xe5924014, /* ldr r4, [r2, #0x14] */
- 0xe31400ff, /* tst r4, #0xff */
- 0x03140c01, /* tsteq r4, #0x100 */
- 0x1a000002, /* bne exit */
- 0xe2811008, /* add r1, r1, #0x8 */
- 0xe2533001, /* subs r3, r3, #1 */
- 0x1affffec, /* bne write */
- /* exit: */
- 0xeafffffe, /* b exit */
- };
-
- /* flash write code */
- if (target_alloc_working_area(target, 4 * 20, &str7x_info->write_algorithm) != ERROR_OK)
- {
- WARNING("no working area available, can't do block memory writes");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
-
- target_write_buffer(target, str7x_info->write_algorithm->address, 20 * 4, (u8*)str7x_flash_write_code);
-
- /* memory buffer */
- while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK)
- {
- buffer_size /= 2;
- if (buffer_size <= 256)
- {
- /* if we already allocated the writing code, but failed to get a buffer, free the algorithm */
- if (str7x_info->write_algorithm)
- target_free_working_area(target, str7x_info->write_algorithm);
-
- WARNING("no large enough working area available, can't do block memory writes");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
- }
-
- armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
- armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
- armv4_5_info.core_state = ARMV4_5_STATE_ARM;
-
- init_reg_param(&reg_params[0], "r0", 32, PARAM_OUT);
- init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT);
- init_reg_param(&reg_params[2], "r2", 32, PARAM_OUT);
- init_reg_param(&reg_params[3], "r3", 32, PARAM_OUT);
- init_reg_param(&reg_params[4], "r4", 32, PARAM_IN);
- init_reg_param(&reg_params[5], "r5", 32, PARAM_OUT);
-
- while (count > 0)
- {
- u32 thisrun_count = (count > (buffer_size / 8)) ? (buffer_size / 8) : count;
-
- target_write_buffer(target, source->address, thisrun_count * 8, buffer);
-
- buf_set_u32(reg_params[0].value, 0, 32, source->address);
- buf_set_u32(reg_params[1].value, 0, 32, address);
- buf_set_u32(reg_params[2].value, 0, 32, str7x_get_flash_adr(bank, FLASH_CR0));
- buf_set_u32(reg_params[3].value, 0, 32, thisrun_count);
- buf_set_u32(reg_params[5].value, 0, 32, str7x_info->busy_bits);
-
- if ((retval = target->type->run_algorithm(target, 0, NULL, 6, reg_params, str7x_info->write_algorithm->address, str7x_info->write_algorithm->address + (19 * 4), 10000, &armv4_5_info)) != ERROR_OK)
- {
- ERROR("error executing str7x flash write algorithm");
- break;
- }
-
- if (buf_get_u32(reg_params[4].value, 0, 32) != 0x00)
- {
- retval = ERROR_FLASH_OPERATION_FAILED;
- break;
- }
-
- buffer += thisrun_count * 8;
- address += thisrun_count * 8;
- count -= thisrun_count;
- }
-
- target_free_working_area(target, source);
- target_free_working_area(target, str7x_info->write_algorithm);
-
- destroy_reg_param(&reg_params[0]);
- destroy_reg_param(&reg_params[1]);
- destroy_reg_param(&reg_params[2]);
- destroy_reg_param(&reg_params[3]);
- destroy_reg_param(&reg_params[4]);
- destroy_reg_param(&reg_params[5]);
-
- return retval;
-}
-
-int str7x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
-{
- target_t *target = bank->target;
- str7x_flash_bank_t *str7x_info = bank->driver_priv;
- u32 dwords_remaining = (count / 8);
- u32 bytes_remaining = (count & 0x00000007);
- u32 address = bank->base + offset;
- u32 bytes_written = 0;
- u32 cmd;
- u32 retval;
- u32 check_address = offset;
- int i;
-
- if (offset & 0x7)
- {
- WARNING("offset 0x%x breaks required 8-byte alignment", offset);
- return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
- }
-
- for (i = 0; i < bank->num_sectors; i++)
- {
- u32 sec_start = bank->sectors[i].offset;
- u32 sec_end = sec_start + bank->sectors[i].size;
-
- /* check if destination falls within the current sector */
- if ((check_address >= sec_start) && (check_address < sec_end))
- {
- /* check if destination ends in the current sector */
- if (offset + count < sec_end)
- check_address = offset + count;
- else
- check_address = sec_end;
- }
- }
-
- if (check_address != offset + count)
- return ERROR_FLASH_DST_OUT_OF_BANK;
-
- /* clear FLASH_ER register */
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_ER), 0x0);
-
- /* multiple dwords (8-byte) to be programmed? */
- if (dwords_remaining > 0)
- {
- /* try using a block write */
- if ((retval = str7x_write_block(bank, buffer, offset, dwords_remaining)) != ERROR_OK)
- {
- if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
- {
- /* if block write failed (no sufficient working area),
- * we use normal (slow) single dword accesses */
- WARNING("couldn't use block writes, falling back to single memory accesses");
- }
- else if (retval == ERROR_FLASH_OPERATION_FAILED)
- {
- /* if an error occured, we examine the reason, and quit */
- retval = str7x_result(bank);
-
- ERROR("flash writing failed with error code: 0x%x", retval);
- return ERROR_FLASH_OPERATION_FAILED;
- }
- }
- else
- {
- buffer += dwords_remaining * 8;
- address += dwords_remaining * 8;
- dwords_remaining = 0;
- }
- }
-
- while (dwords_remaining > 0)
- {
- // command
- cmd = FLASH_DWPG;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
-
- // address
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), address);
-
- // data word 1
- target->type->write_memory(target, str7x_get_flash_adr(bank, FLASH_DR0), 4, 1, buffer + bytes_written);
- bytes_written += 4;
-
- // data word 2
- target->type->write_memory(target, str7x_get_flash_adr(bank, FLASH_DR1), 4, 1, buffer + bytes_written);
- bytes_written += 4;
-
- /* start programming cycle */
- cmd = FLASH_DWPG | FLASH_WMS;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
-
- while (((retval = str7x_status(bank)) & str7x_info->busy_bits))
- {
- usleep(1000);
- }
-
- retval = str7x_result(bank);
-
- if (retval & FLASH_PGER)
- return ERROR_FLASH_OPERATION_FAILED;
- else if (retval & FLASH_WPF)
- return ERROR_FLASH_OPERATION_FAILED;
-
- dwords_remaining--;
- address += 8;
- }
-
- if (bytes_remaining)
- {
- u8 last_dword[8] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
- int i = 0;
-
- while(bytes_remaining > 0)
- {
- last_dword[i++] = *(buffer + bytes_written);
- bytes_remaining--;
- bytes_written++;
- }
-
- // command
- cmd = FLASH_DWPG;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
-
- // address
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), address);
-
- // data word 1
- target->type->write_memory(target, str7x_get_flash_adr(bank, FLASH_DR0), 4, 1, last_dword);
- bytes_written += 4;
-
- // data word 2
- target->type->write_memory(target, str7x_get_flash_adr(bank, FLASH_DR1), 4, 1, last_dword + 4);
- bytes_written += 4;
-
- /* start programming cycle */
- cmd = FLASH_DWPG | FLASH_WMS;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
-
- while (((retval = str7x_status(bank)) & str7x_info->busy_bits))
- {
- usleep(1000);
- }
-
- retval = str7x_result(bank);
-
- if (retval & FLASH_PGER)
- return ERROR_FLASH_OPERATION_FAILED;
- else if (retval & FLASH_WPF)
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- return ERROR_OK;
-}
-
-int str7x_probe(struct flash_bank_s *bank)
-{
- return ERROR_OK;
-}
-
-int str7x_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- return ERROR_OK;
-}
-
-int str7x_erase_check(struct flash_bank_s *bank)
-{
- return str7x_blank_check(bank, 0, bank->num_sectors - 1);
-}
-
-int str7x_info(struct flash_bank_s *bank, char *buf, int buf_size)
-{
- snprintf(buf, buf_size, "str7x flash driver info" );
- return ERROR_OK;
-}
-
-int str7x_handle_disable_jtag_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *bank;
- target_t *target = NULL;
- str7x_flash_bank_t *str7x_info = NULL;
-
- u32 flash_cmd;
- u32 retval;
- u16 ProtectionLevel = 0;
- u16 ProtectionRegs;
-
- if (argc < 1)
- {
- command_print(cmd_ctx, "str7x disable_jtag <bank>");
- return ERROR_OK;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!bank)
- {
- command_print(cmd_ctx, "str7x disable_jtag <bank> ok");
- return ERROR_OK;
- }
-
- str7x_info = bank->driver_priv;
-
- target = bank->target;
-
- if (target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- /* first we get protection status */
- target_read_u32(target, str7x_get_flash_adr(bank, FLASH_NVAPR0), &retval);
-
- if (!(retval & str7x_info->disable_bit))
- {
- ProtectionLevel = 1;
- }
-
- target_read_u32(target, str7x_get_flash_adr(bank, FLASH_NVAPR1), &retval);
- ProtectionRegs = ~(retval >> 16);
-
- while (((ProtectionRegs) != 0) && (ProtectionLevel < 16))
- {
- ProtectionRegs >>= 1;
- ProtectionLevel++;
- }
-
- if (ProtectionLevel == 0)
- {
- flash_cmd = FLASH_SPR;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd);
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), 0x4010DFB8);
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_DR0), 0xFFFFFFFD);
- flash_cmd = FLASH_SPR | FLASH_WMS;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd);
- }
- else
- {
- flash_cmd = FLASH_SPR;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd);
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), 0x4010DFBC);
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_DR0), ~(1<<(15+ProtectionLevel)));
- flash_cmd = FLASH_SPR | FLASH_WMS;
- target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd);
- }
-
- return ERROR_OK;
-}
-
+/***************************************************************************
+ * Copyright (C) 2005 by Dominic Rath *
+ * Dominic.Rath@gmx.de *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "replacements.h"
+
+#include "str7x.h"
+#include "flash.h"
+#include "target.h"
+#include "log.h"
+#include "armv4_5.h"
+#include "algorithm.h"
+#include "binarybuffer.h"
+
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+str7x_mem_layout_t mem_layout[] = {
+ {0x00000000, 0x02000, 0x01},
+ {0x00002000, 0x02000, 0x02},
+ {0x00004000, 0x02000, 0x04},
+ {0x00006000, 0x02000, 0x08},
+ {0x00008000, 0x08000, 0x10},
+ {0x00010000, 0x10000, 0x20},
+ {0x00020000, 0x10000, 0x40},
+ {0x00030000, 0x10000, 0x80},
+ {0x000C0000, 0x02000, 0x10000},
+ {0x000C2000, 0x02000, 0x20000},
+};
+
+int str7x_register_commands(struct command_context_s *cmd_ctx);
+int str7x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
+int str7x_erase(struct flash_bank_s *bank, int first, int last);
+int str7x_protect(struct flash_bank_s *bank, int set, int first, int last);
+int str7x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
+int str7x_probe(struct flash_bank_s *bank);
+int str7x_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int str7x_protect_check(struct flash_bank_s *bank);
+int str7x_erase_check(struct flash_bank_s *bank);
+int str7x_info(struct flash_bank_s *bank, char *buf, int buf_size);
+
+int str7x_handle_disable_jtag_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+
+flash_driver_t str7x_flash =
+{
+ .name = "str7x",
+ .register_commands = str7x_register_commands,
+ .flash_bank_command = str7x_flash_bank_command,
+ .erase = str7x_erase,
+ .protect = str7x_protect,
+ .write = str7x_write,
+ .probe = str7x_probe,
+ .auto_probe = str7x_probe,
+ .erase_check = str7x_erase_check,
+ .protect_check = str7x_protect_check,
+ .info = str7x_info
+};
+
+int str7x_register_commands(struct command_context_s *cmd_ctx)
+{
+ command_t *str7x_cmd = register_command(cmd_ctx, NULL, "str7x", NULL, COMMAND_ANY, NULL);
+
+ register_command(cmd_ctx, str7x_cmd, "disable_jtag", str7x_handle_disable_jtag_command, COMMAND_EXEC,
+ "disable jtag access");
+
+ return ERROR_OK;
+}
+
+int str7x_get_flash_adr(struct flash_bank_s *bank, u32 reg)
+{
+ return (bank->base | reg);
+}
+
+int str7x_build_block_list(struct flash_bank_s *bank)
+{
+ str7x_flash_bank_t *str7x_info = bank->driver_priv;
+
+ int i;
+ int num_sectors = 0, b0_sectors = 0, b1_sectors = 0;
+
+ switch (bank->size)
+ {
+ case 16 * 1024:
+ b0_sectors = 2;
+ break;
+ case 64 * 1024:
+ b0_sectors = 5;
+ break;
+ case 128 * 1024:
+ b0_sectors = 6;
+ break;
+ case 256 * 1024:
+ b0_sectors = 8;
+ break;
+ default:
+ ERROR("BUG: unknown bank->size encountered");
+ exit(-1);
+ }
+
+ if( str7x_info->bank1 == 1 )
+ {
+ b1_sectors += 2;
+ }
+
+ num_sectors = b0_sectors + b1_sectors;
+
+ bank->num_sectors = num_sectors;
+ bank->sectors = malloc(sizeof(flash_sector_t) * num_sectors);
+ str7x_info->sector_bits = malloc(sizeof(u32) * num_sectors);
+ str7x_info->sector_bank = malloc(sizeof(u32) * num_sectors);
+
+ num_sectors = 0;
+
+ for (i = 0; i < b0_sectors; i++)
+ {
+ bank->sectors[num_sectors].offset = mem_layout[i].sector_start;
+ bank->sectors[num_sectors].size = mem_layout[i].sector_size;
+ bank->sectors[num_sectors].is_erased = -1;
+ bank->sectors[num_sectors].is_protected = 1;
+ str7x_info->sector_bank[num_sectors] = 0;
+ str7x_info->sector_bits[num_sectors++] = mem_layout[i].sector_bit;
+ }
+
+ if (b1_sectors)
+ {
+ for (i = 8; i < 10; i++)
+ {
+ bank->sectors[num_sectors].offset = mem_layout[i].sector_start;
+ bank->sectors[num_sectors].size = mem_layout[i].sector_size;
+ bank->sectors[num_sectors].is_erased = -1;
+ bank->sectors[num_sectors].is_protected = 1;
+ str7x_info->sector_bank[num_sectors] = 1;
+ str7x_info->sector_bits[num_sectors++] = mem_layout[i].sector_bit;
+ }
+ }
+
+ return ERROR_OK;
+}
+
+/* flash bank str7x <base> <size> 0 0 <target#> <str71_variant>
+ */
+int str7x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
+{
+ str7x_flash_bank_t *str7x_info;
+
+ if (argc < 7)
+ {
+ WARNING("incomplete flash_bank str7x configuration");
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ str7x_info = malloc(sizeof(str7x_flash_bank_t));
+ bank->driver_priv = str7x_info;
+
+ /* set default bits for str71x flash */
+ str7x_info->bank1 = 1;
+ str7x_info->busy_bits = (FLASH_LOCK|FLASH_BSYA1|FLASH_BSYA0);
+ str7x_info->disable_bit = (1<<1);
+
+ if (strcmp(args[6], "STR71x") == 0)
+ {
+ if (bank->base != 0x40000000)
+ {
+ WARNING("overriding flash base address for STR71x device with 0x40000000");
+ bank->base = 0x40000000;
+ }
+ }
+ else if (strcmp(args[6], "STR73x") == 0)
+ {
+ str7x_info->bank1 = 0;
+ str7x_info->busy_bits = (FLASH_LOCK|FLASH_BSYA0);
+
+ if (bank->base != 0x80000000)
+ {
+ WARNING("overriding flash base address for STR73x device with 0x80000000");
+ bank->base = 0x80000000;
+ }
+ }
+ else if (strcmp(args[6], "STR75x") == 0)
+ {
+ str7x_info->disable_bit = (1<<0);
+
+ if (bank->base != 0x20000000)
+ {
+ WARNING("overriding flash base address for STR75x device with 0x20000000");
+ bank->base = 0x20000000;
+ }
+ }
+ else
+ {
+ ERROR("unknown STR7x variant: '%s'", args[6]);
+ free(str7x_info);
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ str7x_build_block_list(bank);
+
+ str7x_info->write_algorithm = NULL;
+
+ return ERROR_OK;
+}
+
+u32 str7x_status(struct flash_bank_s *bank)
+{
+ target_t *target = bank->target;
+ u32 retval;
+
+ target_read_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), &retval);
+
+ return retval;
+}
+
+u32 str7x_result(struct flash_bank_s *bank)
+{
+ target_t *target = bank->target;
+ u32 retval;
+
+ target_read_u32(target, str7x_get_flash_adr(bank, FLASH_ER), &retval);
+
+ return retval;
+}
+
+int str7x_blank_check(struct flash_bank_s *bank, int first, int last)
+{
+ target_t *target = bank->target;
+ u8 *buffer;
+ int i;
+ int nBytes;
+
+ if ((first < 0) || (last > bank->num_sectors))
+ return ERROR_FLASH_SECTOR_INVALID;
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ buffer = malloc(256);
+
+ for (i = first; i <= last; i++)
+ {
+ bank->sectors[i].is_erased = 1;
+
+ target->type->read_memory(target, bank->base + bank->sectors[i].offset, 4, 256/4, buffer);
+
+ for (nBytes = 0; nBytes < 256; nBytes++)
+ {
+ if (buffer[nBytes] != 0xFF)
+ {
+ bank->sectors[i].is_erased = 0;
+ break;
+ }
+ }
+ }
+
+ free(buffer);
+
+ return ERROR_OK;
+}
+
+int str7x_protect_check(struct flash_bank_s *bank)
+{
+ str7x_flash_bank_t *str7x_info = bank->driver_priv;
+ target_t *target = bank->target;
+
+ int i;
+ u32 retval;
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ target_read_u32(target, str7x_get_flash_adr(bank, FLASH_NVWPAR), &retval);
+
+ for (i = 0; i < bank->num_sectors; i++)
+ {
+ if (retval & str7x_info->sector_bits[i])
+ bank->sectors[i].is_protected = 0;
+ else
+ bank->sectors[i].is_protected = 1;
+ }
+
+ return ERROR_OK;
+}
+
+int str7x_erase(struct flash_bank_s *bank, int first, int last)
+{
+ str7x_flash_bank_t *str7x_info = bank->driver_priv;
+ target_t *target = bank->target;
+
+ int i;
+ u32 cmd;
+ u32 retval;
+ u32 b0_sectors = 0, b1_sectors = 0;
+
+ for (i = first; i <= last; i++)
+ {
+ if (str7x_info->sector_bank[i] == 0)
+ b0_sectors |= str7x_info->sector_bits[i];
+ else if (str7x_info->sector_bank[i] == 1)
+ b1_sectors |= str7x_info->sector_bits[i];
+ else
+ ERROR("BUG: str7x_info->sector_bank[i] neither 0 nor 1 (%i)", str7x_info->sector_bank[i]);
+ }
+
+ if (b0_sectors)
+ {
+ DEBUG("b0_sectors: 0x%x", b0_sectors);
+
+ /* clear FLASH_ER register */
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_ER), 0x0);
+
+ cmd = FLASH_SER;
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
+
+ cmd = b0_sectors;
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR1), cmd);
+
+ cmd = FLASH_SER|FLASH_WMS;
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
+
+ while (((retval = str7x_status(bank)) & str7x_info->busy_bits)){
+ usleep(1000);
+ }
+
+ retval = str7x_result(bank);
+
+ if (retval)
+ {
+ ERROR("error erasing flash bank, FLASH_ER: 0x%x", retval);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ }
+
+ if (b1_sectors)
+ {
+ DEBUG("b1_sectors: 0x%x", b1_sectors);
+
+ /* clear FLASH_ER register */
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_ER), 0x0);
+
+ cmd = FLASH_SER;
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
+
+ cmd = b1_sectors;
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR1), cmd);
+
+ cmd = FLASH_SER|FLASH_WMS;
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
+
+ while (((retval = str7x_status(bank)) & str7x_info->busy_bits)){
+ usleep(1000);
+ }
+
+ retval = str7x_result(bank);
+
+ if (retval)
+ {
+ ERROR("error erasing flash bank, FLASH_ER: 0x%x", retval);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ }
+
+ for (i = first; i <= last; i++)
+ bank->sectors[i].is_erased = 1;
+
+ return ERROR_OK;
+}
+
+int str7x_protect(struct flash_bank_s *bank, int set, int first, int last)
+{
+ str7x_flash_bank_t *str7x_info = bank->driver_priv;
+ target_t *target = bank->target;
+ int i;
+ u32 cmd;
+ u32 retval;
+ u32 protect_blocks;
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ protect_blocks = 0xFFFFFFFF;
+
+ if (set)
+ {
+ for (i = first; i <= last; i++)
+ protect_blocks &= ~(str7x_info->sector_bits[i]);
+ }
+
+ /* clear FLASH_ER register */
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_ER), 0x0);
+
+ cmd = FLASH_SPR;
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
+
+ cmd = str7x_get_flash_adr(bank, FLASH_NVWPAR);
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), cmd);
+
+ cmd = protect_blocks;
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_DR0), cmd);
+
+ cmd = FLASH_SPR|FLASH_WMS;
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
+
+ while (((retval = str7x_status(bank)) & str7x_info->busy_bits)){
+ usleep(1000);
+ }
+
+ retval = str7x_result(bank);
+
+ DEBUG("retval: 0x%8.8x", retval);
+
+ if (retval & FLASH_ERER)
+ return ERROR_FLASH_SECTOR_NOT_ERASED;
+ else if (retval & FLASH_WPF)
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ return ERROR_OK;
+}
+
+int str7x_write_block(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
+{
+ str7x_flash_bank_t *str7x_info = bank->driver_priv;
+ target_t *target = bank->target;
+ u32 buffer_size = 8192;
+ working_area_t *source;
+ u32 address = bank->base + offset;
+ reg_param_t reg_params[6];
+ armv4_5_algorithm_t armv4_5_info;
+ int retval = ERROR_OK;
+
+ u32 str7x_flash_write_code[] = {
+ /* write: */
+ 0xe3a04201, /* mov r4, #0x10000000 */
+ 0xe5824000, /* str r4, [r2, #0x0] */
+ 0xe5821010, /* str r1, [r2, #0x10] */
+ 0xe4904004, /* ldr r4, [r0], #4 */
+ 0xe5824008, /* str r4, [r2, #0x8] */
+ 0xe4904004, /* ldr r4, [r0], #4 */
+ 0xe582400c, /* str r4, [r2, #0xc] */
+ 0xe3a04209, /* mov r4, #0x90000000 */
+ 0xe5824000, /* str r4, [r2, #0x0] */
+ /* busy: */
+ 0xe5924000, /* ldr r4, [r2, #0x0] */
+ 0xe1140005, /* tst r4, r5 */
+ 0x1afffffc, /* bne busy */
+ 0xe5924014, /* ldr r4, [r2, #0x14] */
+ 0xe31400ff, /* tst r4, #0xff */
+ 0x03140c01, /* tsteq r4, #0x100 */
+ 0x1a000002, /* bne exit */
+ 0xe2811008, /* add r1, r1, #0x8 */
+ 0xe2533001, /* subs r3, r3, #1 */
+ 0x1affffec, /* bne write */
+ /* exit: */
+ 0xeafffffe, /* b exit */
+ };
+
+ /* flash write code */
+ if (target_alloc_working_area(target, 4 * 20, &str7x_info->write_algorithm) != ERROR_OK)
+ {
+ WARNING("no working area available, can't do block memory writes");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ };
+
+ target_write_buffer(target, str7x_info->write_algorithm->address, 20 * 4, (u8*)str7x_flash_write_code);
+
+ /* memory buffer */
+ while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK)
+ {
+ buffer_size /= 2;
+ if (buffer_size <= 256)
+ {
+ /* if we already allocated the writing code, but failed to get a buffer, free the algorithm */
+ if (str7x_info->write_algorithm)
+ target_free_working_area(target, str7x_info->write_algorithm);
+
+ WARNING("no large enough working area available, can't do block memory writes");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+ }
+
+ armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
+ armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
+ armv4_5_info.core_state = ARMV4_5_STATE_ARM;
+
+ init_reg_param(&reg_params[0], "r0", 32, PARAM_OUT);
+ init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT);
+ init_reg_param(&reg_params[2], "r2", 32, PARAM_OUT);
+ init_reg_param(&reg_params[3], "r3", 32, PARAM_OUT);
+ init_reg_param(&reg_params[4], "r4", 32, PARAM_IN);
+ init_reg_param(&reg_params[5], "r5", 32, PARAM_OUT);
+
+ while (count > 0)
+ {
+ u32 thisrun_count = (count > (buffer_size / 8)) ? (buffer_size / 8) : count;
+
+ target_write_buffer(target, source->address, thisrun_count * 8, buffer);
+
+ buf_set_u32(reg_params[0].value, 0, 32, source->address);
+ buf_set_u32(reg_params[1].value, 0, 32, address);
+ buf_set_u32(reg_params[2].value, 0, 32, str7x_get_flash_adr(bank, FLASH_CR0));
+ buf_set_u32(reg_params[3].value, 0, 32, thisrun_count);
+ buf_set_u32(reg_params[5].value, 0, 32, str7x_info->busy_bits);
+
+ if ((retval = target->type->run_algorithm(target, 0, NULL, 6, reg_params, str7x_info->write_algorithm->address, str7x_info->write_algorithm->address + (19 * 4), 10000, &armv4_5_info)) != ERROR_OK)
+ {
+ ERROR("error executing str7x flash write algorithm");
+ break;
+ }
+
+ if (buf_get_u32(reg_params[4].value, 0, 32) != 0x00)
+ {
+ retval = ERROR_FLASH_OPERATION_FAILED;
+ break;
+ }
+
+ buffer += thisrun_count * 8;
+ address += thisrun_count * 8;
+ count -= thisrun_count;
+ }
+
+ target_free_working_area(target, source);
+ target_free_working_area(target, str7x_info->write_algorithm);
+
+ destroy_reg_param(&reg_params[0]);
+ destroy_reg_param(&reg_params[1]);
+ destroy_reg_param(&reg_params[2]);
+ destroy_reg_param(&reg_params[3]);
+ destroy_reg_param(&reg_params[4]);
+ destroy_reg_param(&reg_params[5]);
+
+ return retval;
+}
+
+int str7x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
+{
+ target_t *target = bank->target;
+ str7x_flash_bank_t *str7x_info = bank->driver_priv;
+ u32 dwords_remaining = (count / 8);
+ u32 bytes_remaining = (count & 0x00000007);
+ u32 address = bank->base + offset;
+ u32 bytes_written = 0;
+ u32 cmd;
+ u32 retval;
+ u32 check_address = offset;
+ int i;
+
+ if (offset & 0x7)
+ {
+ WARNING("offset 0x%x breaks required 8-byte alignment", offset);
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ }
+
+ for (i = 0; i < bank->num_sectors; i++)
+ {
+ u32 sec_start = bank->sectors[i].offset;
+ u32 sec_end = sec_start + bank->sectors[i].size;
+
+ /* check if destination falls within the current sector */
+ if ((check_address >= sec_start) && (check_address < sec_end))
+ {
+ /* check if destination ends in the current sector */
+ if (offset + count < sec_end)
+ check_address = offset + count;
+ else
+ check_address = sec_end;
+ }
+ }
+
+ if (check_address != offset + count)
+ return ERROR_FLASH_DST_OUT_OF_BANK;
+
+ /* clear FLASH_ER register */
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_ER), 0x0);
+
+ /* multiple dwords (8-byte) to be programmed? */
+ if (dwords_remaining > 0)
+ {
+ /* try using a block write */
+ if ((retval = str7x_write_block(bank, buffer, offset, dwords_remaining)) != ERROR_OK)
+ {
+ if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
+ {
+ /* if block write failed (no sufficient working area),
+ * we use normal (slow) single dword accesses */
+ WARNING("couldn't use block writes, falling back to single memory accesses");
+ }
+ else if (retval == ERROR_FLASH_OPERATION_FAILED)
+ {
+ /* if an error occured, we examine the reason, and quit */
+ retval = str7x_result(bank);
+
+ ERROR("flash writing failed with error code: 0x%x", retval);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ }
+ else
+ {
+ buffer += dwords_remaining * 8;
+ address += dwords_remaining * 8;
+ dwords_remaining = 0;
+ }
+ }
+
+ while (dwords_remaining > 0)
+ {
+ // command
+ cmd = FLASH_DWPG;
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
+
+ // address
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), address);
+
+ // data word 1
+ target->type->write_memory(target, str7x_get_flash_adr(bank, FLASH_DR0), 4, 1, buffer + bytes_written);
+ bytes_written += 4;
+
+ // data word 2
+ target->type->write_memory(target, str7x_get_flash_adr(bank, FLASH_DR1), 4, 1, buffer + bytes_written);
+ bytes_written += 4;
+
+ /* start programming cycle */
+ cmd = FLASH_DWPG | FLASH_WMS;
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
+
+ while (((retval = str7x_status(bank)) & str7x_info->busy_bits))
+ {
+ usleep(1000);
+ }
+
+ retval = str7x_result(bank);
+
+ if (retval & FLASH_PGER)
+ return ERROR_FLASH_OPERATION_FAILED;
+ else if (retval & FLASH_WPF)
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ dwords_remaining--;
+ address += 8;
+ }
+
+ if (bytes_remaining)
+ {
+ u8 last_dword[8] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+ int i = 0;
+
+ while(bytes_remaining > 0)
+ {
+ last_dword[i++] = *(buffer + bytes_written);
+ bytes_remaining--;
+ bytes_written++;
+ }
+
+ // command
+ cmd = FLASH_DWPG;
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
+
+ // address
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), address);
+
+ // data word 1
+ target->type->write_memory(target, str7x_get_flash_adr(bank, FLASH_DR0), 4, 1, last_dword);
+ bytes_written += 4;
+
+ // data word 2
+ target->type->write_memory(target, str7x_get_flash_adr(bank, FLASH_DR1), 4, 1, last_dword + 4);
+ bytes_written += 4;
+
+ /* start programming cycle */
+ cmd = FLASH_DWPG | FLASH_WMS;
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), cmd);
+
+ while (((retval = str7x_status(bank)) & str7x_info->busy_bits))
+ {
+ usleep(1000);
+ }
+
+ retval = str7x_result(bank);
+
+ if (retval & FLASH_PGER)
+ return ERROR_FLASH_OPERATION_FAILED;
+ else if (retval & FLASH_WPF)
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ return ERROR_OK;
+}
+
+int str7x_probe(struct flash_bank_s *bank)
+{
+ return ERROR_OK;
+}
+
+int str7x_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ return ERROR_OK;
+}
+
+int str7x_erase_check(struct flash_bank_s *bank)
+{
+ return str7x_blank_check(bank, 0, bank->num_sectors - 1);
+}
+
+int str7x_info(struct flash_bank_s *bank, char *buf, int buf_size)
+{
+ snprintf(buf, buf_size, "str7x flash driver info" );
+ return ERROR_OK;
+}
+
+int str7x_handle_disable_jtag_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *bank;
+ target_t *target = NULL;
+ str7x_flash_bank_t *str7x_info = NULL;
+
+ u32 flash_cmd;
+ u32 retval;
+ u16 ProtectionLevel = 0;
+ u16 ProtectionRegs;
+
+ if (argc < 1)
+ {
+ command_print(cmd_ctx, "str7x disable_jtag <bank>");
+ return ERROR_OK;
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!bank)
+ {
+ command_print(cmd_ctx, "str7x disable_jtag <bank> ok");
+ return ERROR_OK;
+ }
+
+ str7x_info = bank->driver_priv;
+
+ target = bank->target;
+
+ if (target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ /* first we get protection status */
+ target_read_u32(target, str7x_get_flash_adr(bank, FLASH_NVAPR0), &retval);
+
+ if (!(retval & str7x_info->disable_bit))
+ {
+ ProtectionLevel = 1;
+ }
+
+ target_read_u32(target, str7x_get_flash_adr(bank, FLASH_NVAPR1), &retval);
+ ProtectionRegs = ~(retval >> 16);
+
+ while (((ProtectionRegs) != 0) && (ProtectionLevel < 16))
+ {
+ ProtectionRegs >>= 1;
+ ProtectionLevel++;
+ }
+
+ if (ProtectionLevel == 0)
+ {
+ flash_cmd = FLASH_SPR;
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd);
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), 0x4010DFB8);
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_DR0), 0xFFFFFFFD);
+ flash_cmd = FLASH_SPR | FLASH_WMS;
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd);
+ }
+ else
+ {
+ flash_cmd = FLASH_SPR;
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd);
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_AR), 0x4010DFBC);
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_DR0), ~(1<<(15+ProtectionLevel)));
+ flash_cmd = FLASH_SPR | FLASH_WMS;
+ target_write_u32(target, str7x_get_flash_adr(bank, FLASH_CR0), flash_cmd);
+ }
+
+ return ERROR_OK;
+}
+
diff --git a/src/flash/str9x.c b/src/flash/str9x.c
index f5fe2e96..a34d40a9 100644
--- a/src/flash/str9x.c
+++ b/src/flash/str9x.c
@@ -1,624 +1,624 @@
-/***************************************************************************
- * Copyright (C) 2005 by Dominic Rath *
- * Dominic.Rath@gmx.de *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- ***************************************************************************/
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "replacements.h"
-
-#include "str9x.h"
-#include "flash.h"
-#include "target.h"
-#include "log.h"
-#include "armv4_5.h"
-#include "arm966e.h"
-#include "algorithm.h"
-#include "binarybuffer.h"
-
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-str9x_mem_layout_t mem_layout_str9bank0[] = {
- {0x00000000, 0x10000, 0x01},
- {0x00010000, 0x10000, 0x02},
- {0x00020000, 0x10000, 0x04},
- {0x00030000, 0x10000, 0x08},
- {0x00040000, 0x10000, 0x10},
- {0x00050000, 0x10000, 0x20},
- {0x00060000, 0x10000, 0x40},
- {0x00070000, 0x10000, 0x80},
-};
-
-str9x_mem_layout_t mem_layout_str9bank1[] = {
- {0x00000000, 0x02000, 0x100},
- {0x00002000, 0x02000, 0x200},
- {0x00004000, 0x02000, 0x400},
- {0x00006000, 0x02000, 0x800}
-};
-
-static u32 bank1start = 0x00080000;
-
-int str9x_register_commands(struct command_context_s *cmd_ctx);
-int str9x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
-int str9x_erase(struct flash_bank_s *bank, int first, int last);
-int str9x_protect(struct flash_bank_s *bank, int set, int first, int last);
-int str9x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
-int str9x_probe(struct flash_bank_s *bank);
-int str9x_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int str9x_protect_check(struct flash_bank_s *bank);
-int str9x_erase_check(struct flash_bank_s *bank);
-int str9x_info(struct flash_bank_s *bank, char *buf, int buf_size);
-
-int str9x_handle_flash_config_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-
-flash_driver_t str9x_flash =
-{
- .name = "str9x",
- .register_commands = str9x_register_commands,
- .flash_bank_command = str9x_flash_bank_command,
- .erase = str9x_erase,
- .protect = str9x_protect,
- .write = str9x_write,
- .probe = str9x_probe,
- .auto_probe = str9x_probe,
- .erase_check = str9x_erase_check,
- .protect_check = str9x_protect_check,
- .info = str9x_info
-};
-
-int str9x_register_commands(struct command_context_s *cmd_ctx)
-{
- command_t *str9x_cmd = register_command(cmd_ctx, NULL, "str9x", NULL, COMMAND_ANY, NULL);
-
- register_command(cmd_ctx, str9x_cmd, "flash_config", str9x_handle_flash_config_command, COMMAND_EXEC,
- "configure str9 flash controller");
-
- return ERROR_OK;
-}
-
-int str9x_build_block_list(struct flash_bank_s *bank)
-{
- str9x_flash_bank_t *str9x_info = bank->driver_priv;
-
- int i;
- int num_sectors = 0;
- int b0_sectors = 0, b1_sectors = 0;
-
- switch (bank->size)
- {
- case (256 * 1024):
- b0_sectors = 4;
- break;
- case (512 * 1024):
- b0_sectors = 8;
- break;
- case (32 * 1024):
- b1_sectors = 4;
- bank1start = bank->base;
- break;
- default:
- ERROR("BUG: unknown bank->size encountered");
- exit(-1);
- }
-
- num_sectors = b0_sectors + b1_sectors;
-
- bank->num_sectors = num_sectors;
- bank->sectors = malloc(sizeof(flash_sector_t) * num_sectors);
- str9x_info->sector_bits = malloc(sizeof(u32) * num_sectors);
-
- num_sectors = 0;
-
- for (i = 0; i < b0_sectors; i++)
- {
- bank->sectors[num_sectors].offset = mem_layout_str9bank0[i].sector_start;
- bank->sectors[num_sectors].size = mem_layout_str9bank0[i].sector_size;
- bank->sectors[num_sectors].is_erased = -1;
- bank->sectors[num_sectors].is_protected = 1;
- str9x_info->sector_bits[num_sectors++] = mem_layout_str9bank0[i].sector_bit;
- }
-
- for (i = 0; i < b1_sectors; i++)
- {
- bank->sectors[num_sectors].offset = mem_layout_str9bank1[i].sector_start;
- bank->sectors[num_sectors].size = mem_layout_str9bank1[i].sector_size;
- bank->sectors[num_sectors].is_erased = -1;
- bank->sectors[num_sectors].is_protected = 1;
- str9x_info->sector_bits[num_sectors++] = mem_layout_str9bank1[i].sector_bit;
- }
-
- return ERROR_OK;
-}
-
-/* flash bank str9x <base> <size> 0 0 <target#>
- */
-int str9x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
-{
- str9x_flash_bank_t *str9x_info;
-
- if (argc < 6)
- {
- WARNING("incomplete flash_bank str9x configuration");
- return ERROR_FLASH_BANK_INVALID;
- }
-
- str9x_info = malloc(sizeof(str9x_flash_bank_t));
- bank->driver_priv = str9x_info;
-
- str9x_build_block_list(bank);
-
- str9x_info->write_algorithm = NULL;
-
- return ERROR_OK;
-}
-
-int str9x_blank_check(struct flash_bank_s *bank, int first, int last)
-{
- target_t *target = bank->target;
- u8 *buffer;
- int i;
- int nBytes;
-
- if ((first < 0) || (last > bank->num_sectors))
- return ERROR_FLASH_SECTOR_INVALID;
-
- if (bank->target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- buffer = malloc(256);
-
- for (i = first; i <= last; i++)
- {
- bank->sectors[i].is_erased = 1;
-
- target->type->read_memory(target, bank->base + bank->sectors[i].offset, 4, 256/4, buffer);
-
- for (nBytes = 0; nBytes < 256; nBytes++)
- {
- if (buffer[nBytes] != 0xFF)
- {
- bank->sectors[i].is_erased = 0;
- break;
- }
- }
- }
-
- free(buffer);
-
- return ERROR_OK;
-}
-
-int str9x_protect_check(struct flash_bank_s *bank)
-{
- str9x_flash_bank_t *str9x_info = bank->driver_priv;
- target_t *target = bank->target;
-
- int i;
- u32 adr;
- u16 status;
-
- if (bank->target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- /* read level one protection */
-
- adr = bank1start + 0x10;
-
- target_write_u16(target, adr, 0x90);
- target_read_u16(target, adr, &status);
- target_write_u16(target, adr, 0xFF);
-
- for (i = 0; i < bank->num_sectors; i++)
- {
- if (status & str9x_info->sector_bits[i])
- bank->sectors[i].is_protected = 1;
- else
- bank->sectors[i].is_protected = 0;
- }
-
- return ERROR_OK;
-}
-
-int str9x_erase(struct flash_bank_s *bank, int first, int last)
-{
- target_t *target = bank->target;
- int i;
- u32 adr;
- u8 status;
-
- for (i = first; i <= last; i++)
- {
- adr = bank->base + bank->sectors[i].offset;
-
- /* erase sectors */
- target_write_u16(target, adr, 0x20);
- target_write_u16(target, adr, 0xD0);
-
- /* get status */
- target_write_u16(target, adr, 0x70);
-
- while (1) {
- target_read_u8(target, adr, &status);
- if( status & 0x80 )
- break;
- usleep(1000);
- }
-
- /* clear status, also clear read array */
- target_write_u16(target, adr, 0x50);
-
- /* read array command */
- target_write_u16(target, adr, 0xFF);
-
- if( status & 0x22 )
- {
- ERROR("error erasing flash bank, status: 0x%x", status);
- return ERROR_FLASH_OPERATION_FAILED;
- }
- }
-
- for (i = first; i <= last; i++)
- bank->sectors[i].is_erased = 1;
-
- return ERROR_OK;
-}
-
-int str9x_protect(struct flash_bank_s *bank, int set, int first, int last)
-{
- target_t *target = bank->target;
- int i;
- u32 adr;
- u8 status;
-
- if (bank->target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- for (i = first; i <= last; i++)
- {
- /* Level One Protection */
-
- adr = bank->base + bank->sectors[i].offset;
-
- target_write_u16(target, adr, 0x60);
- if( set )
- target_write_u16(target, adr, 0x01);
- else
- target_write_u16(target, adr, 0xD0);
-
- /* query status */
- target_read_u8(target, adr, &status);
- }
-
- return ERROR_OK;
-}
-
-int str9x_write_block(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
-{
- str9x_flash_bank_t *str9x_info = bank->driver_priv;
- target_t *target = bank->target;
- u32 buffer_size = 8192;
- working_area_t *source;
- u32 address = bank->base + offset;
- reg_param_t reg_params[4];
- armv4_5_algorithm_t armv4_5_info;
- int retval;
-
- u32 str9x_flash_write_code[] = {
- /* write: */
- 0xe3c14003, /* bic r4, r1, #3 */
- 0xe3a03040, /* mov r3, #0x40 */
- 0xe1c430b0, /* strh r3, [r4, #0] */
- 0xe0d030b2, /* ldrh r3, [r0], #2 */
- 0xe0c130b2, /* strh r3, [r1], #2 */
- 0xe3a03070, /* mov r3, #0x70 */
- 0xe1c430b0, /* strh r3, [r4, #0] */
- /* busy: */
- 0xe5d43000, /* ldrb r3, [r4, #0] */
- 0xe3130080, /* tst r3, #0x80 */
- 0x0afffffc, /* beq busy */
- 0xe3a05050, /* mov r5, #0x50 */
- 0xe1c450b0, /* strh r5, [r4, #0] */
- 0xe3a050ff, /* mov r5, #0xFF */
- 0xe1c450b0, /* strh r5, [r4, #0] */
- 0xe3130012, /* tst r3, #0x12 */
- 0x1a000001, /* bne exit */
- 0xe2522001, /* subs r2, r2, #1 */
- 0x1affffed, /* bne write */
- /* exit: */
- 0xeafffffe, /* b exit */
- };
-
- /* flash write code */
- if (target_alloc_working_area(target, 4 * 19, &str9x_info->write_algorithm) != ERROR_OK)
- {
- WARNING("no working area available, can't do block memory writes");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
-
- target_write_buffer(target, str9x_info->write_algorithm->address, 19 * 4, (u8*)str9x_flash_write_code);
-
- /* memory buffer */
- while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK)
- {
- buffer_size /= 2;
- if (buffer_size <= 256)
- {
- /* if we already allocated the writing code, but failed to get a buffer, free the algorithm */
- if (str9x_info->write_algorithm)
- target_free_working_area(target, str9x_info->write_algorithm);
-
- WARNING("no large enough working area available, can't do block memory writes");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
- }
-
- armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
- armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
- armv4_5_info.core_state = ARMV4_5_STATE_ARM;
-
- init_reg_param(&reg_params[0], "r0", 32, PARAM_OUT);
- init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT);
- init_reg_param(&reg_params[2], "r2", 32, PARAM_OUT);
- init_reg_param(&reg_params[3], "r3", 32, PARAM_IN);
-
- while (count > 0)
- {
- u32 thisrun_count = (count > (buffer_size / 2)) ? (buffer_size / 2) : count;
-
- target_write_buffer(target, source->address, thisrun_count * 2, buffer);
-
- buf_set_u32(reg_params[0].value, 0, 32, source->address);
- buf_set_u32(reg_params[1].value, 0, 32, address);
- buf_set_u32(reg_params[2].value, 0, 32, thisrun_count);
-
- if ((retval = target->type->run_algorithm(target, 0, NULL, 4, reg_params, str9x_info->write_algorithm->address, str9x_info->write_algorithm->address + (18 * 4), 10000, &armv4_5_info)) != ERROR_OK)
- {
- target_free_working_area(target, source);
- target_free_working_area(target, str9x_info->write_algorithm);
- ERROR("error executing str9x flash write algorithm");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- if (buf_get_u32(reg_params[3].value, 0, 32) != 0x80)
- {
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- buffer += thisrun_count * 2;
- address += thisrun_count * 2;
- count -= thisrun_count;
- }
-
- target_free_working_area(target, source);
- target_free_working_area(target, str9x_info->write_algorithm);
-
- destroy_reg_param(&reg_params[0]);
- destroy_reg_param(&reg_params[1]);
- destroy_reg_param(&reg_params[2]);
- destroy_reg_param(&reg_params[3]);
-
- return ERROR_OK;
-}
-
-int str9x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
-{
- target_t *target = bank->target;
- u32 words_remaining = (count / 2);
- u32 bytes_remaining = (count & 0x00000001);
- u32 address = bank->base + offset;
- u32 bytes_written = 0;
- u8 status;
- u32 retval;
- u32 check_address = offset;
- u32 bank_adr;
- int i;
-
- if (offset & 0x1)
- {
- WARNING("offset 0x%x breaks required 2-byte alignment", offset);
- return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
- }
-
- for (i = 0; i < bank->num_sectors; i++)
- {
- u32 sec_start = bank->sectors[i].offset;
- u32 sec_end = sec_start + bank->sectors[i].size;
-
- /* check if destination falls within the current sector */
- if ((check_address >= sec_start) && (check_address < sec_end))
- {
- /* check if destination ends in the current sector */
- if (offset + count < sec_end)
- check_address = offset + count;
- else
- check_address = sec_end;
- }
- }
-
- if (check_address != offset + count)
- return ERROR_FLASH_DST_OUT_OF_BANK;
-
- /* multiple half words (2-byte) to be programmed? */
- if (words_remaining > 0)
- {
- /* try using a block write */
- if ((retval = str9x_write_block(bank, buffer, offset, words_remaining)) != ERROR_OK)
- {
- if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
- {
- /* if block write failed (no sufficient working area),
- * we use normal (slow) single dword accesses */
- WARNING("couldn't use block writes, falling back to single memory accesses");
- }
- else if (retval == ERROR_FLASH_OPERATION_FAILED)
- {
- ERROR("flash writing failed with error code: 0x%x", retval);
- return ERROR_FLASH_OPERATION_FAILED;
- }
- }
- else
- {
- buffer += words_remaining * 2;
- address += words_remaining * 2;
- words_remaining = 0;
- }
- }
-
- while (words_remaining > 0)
- {
- bank_adr = address & ~0x03;
-
- /* write data command */
- target_write_u16(target, bank_adr, 0x40);
- target->type->write_memory(target, address, 2, 1, buffer + bytes_written);
-
- /* get status command */
- target_write_u16(target, bank_adr, 0x70);
-
- while (1) {
- target_read_u8(target, bank_adr, &status);
- if( status & 0x80 )
- break;
- usleep(1000);
- }
-
- /* clear status reg and read array */
- target_write_u16(target, bank_adr, 0x50);
- target_write_u16(target, bank_adr, 0xFF);
-
- if (status & 0x10)
- return ERROR_FLASH_OPERATION_FAILED;
- else if (status & 0x02)
- return ERROR_FLASH_OPERATION_FAILED;
-
- bytes_written += 2;
- words_remaining--;
- address += 2;
- }
-
- if (bytes_remaining)
- {
- u8 last_halfword[2] = {0xff, 0xff};
- int i = 0;
-
- while(bytes_remaining > 0)
- {
- last_halfword[i++] = *(buffer + bytes_written);
- bytes_remaining--;
- bytes_written++;
- }
-
- bank_adr = address & ~0x03;
-
- /* write data comamnd */
- target_write_u16(target, bank_adr, 0x40);
- target->type->write_memory(target, address, 2, 1, last_halfword);
-
- /* query status command */
- target_write_u16(target, bank_adr, 0x70);
-
- while (1) {
- target_read_u8(target, bank_adr, &status);
- if( status & 0x80 )
- break;
- usleep(1000);
- }
-
- /* clear status reg and read array */
- target_write_u16(target, bank_adr, 0x50);
- target_write_u16(target, bank_adr, 0xFF);
-
- if (status & 0x10)
- return ERROR_FLASH_OPERATION_FAILED;
- else if (status & 0x02)
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- return ERROR_OK;
-}
-
-int str9x_probe(struct flash_bank_s *bank)
-{
- return ERROR_OK;
-}
-
-int str9x_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- return ERROR_OK;
-}
-
-int str9x_erase_check(struct flash_bank_s *bank)
-{
- return str9x_blank_check(bank, 0, bank->num_sectors - 1);
-}
-
-int str9x_info(struct flash_bank_s *bank, char *buf, int buf_size)
-{
- snprintf(buf, buf_size, "str9x flash driver info" );
- return ERROR_OK;
-}
-
-int str9x_handle_flash_config_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- str9x_flash_bank_t *str9x_info;
- flash_bank_t *bank;
- target_t *target = NULL;
-
- if (argc < 5)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!bank)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- str9x_info = bank->driver_priv;
-
- target = bank->target;
-
- if (bank->target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- /* config flash controller */
- target_write_u32(target, FLASH_BBSR, strtoul(args[1], NULL, 0));
- target_write_u32(target, FLASH_NBBSR, strtoul(args[2], NULL, 0));
- target_write_u32(target, FLASH_BBADR, (strtoul(args[3], NULL, 0) >> 2));
- target_write_u32(target, FLASH_NBBADR, (strtoul(args[4], NULL, 0) >> 2));
-
- /* set bit 18 instruction TCM order as per flash programming manual */
- arm966e_write_cp15(target, 62, 0x40000);
-
- /* enable flash bank 1 */
- target_write_u32(target, FLASH_CR, 0x18);
- return ERROR_OK;
-}
+/***************************************************************************
+ * Copyright (C) 2005 by Dominic Rath *
+ * Dominic.Rath@gmx.de *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "replacements.h"
+
+#include "str9x.h"
+#include "flash.h"
+#include "target.h"
+#include "log.h"
+#include "armv4_5.h"
+#include "arm966e.h"
+#include "algorithm.h"
+#include "binarybuffer.h"
+
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+str9x_mem_layout_t mem_layout_str9bank0[] = {
+ {0x00000000, 0x10000, 0x01},
+ {0x00010000, 0x10000, 0x02},
+ {0x00020000, 0x10000, 0x04},
+ {0x00030000, 0x10000, 0x08},
+ {0x00040000, 0x10000, 0x10},
+ {0x00050000, 0x10000, 0x20},
+ {0x00060000, 0x10000, 0x40},
+ {0x00070000, 0x10000, 0x80},
+};
+
+str9x_mem_layout_t mem_layout_str9bank1[] = {
+ {0x00000000, 0x02000, 0x100},
+ {0x00002000, 0x02000, 0x200},
+ {0x00004000, 0x02000, 0x400},
+ {0x00006000, 0x02000, 0x800}
+};
+
+static u32 bank1start = 0x00080000;
+
+int str9x_register_commands(struct command_context_s *cmd_ctx);
+int str9x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
+int str9x_erase(struct flash_bank_s *bank, int first, int last);
+int str9x_protect(struct flash_bank_s *bank, int set, int first, int last);
+int str9x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
+int str9x_probe(struct flash_bank_s *bank);
+int str9x_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int str9x_protect_check(struct flash_bank_s *bank);
+int str9x_erase_check(struct flash_bank_s *bank);
+int str9x_info(struct flash_bank_s *bank, char *buf, int buf_size);
+
+int str9x_handle_flash_config_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+
+flash_driver_t str9x_flash =
+{
+ .name = "str9x",
+ .register_commands = str9x_register_commands,
+ .flash_bank_command = str9x_flash_bank_command,
+ .erase = str9x_erase,
+ .protect = str9x_protect,
+ .write = str9x_write,
+ .probe = str9x_probe,
+ .auto_probe = str9x_probe,
+ .erase_check = str9x_erase_check,
+ .protect_check = str9x_protect_check,
+ .info = str9x_info
+};
+
+int str9x_register_commands(struct command_context_s *cmd_ctx)
+{
+ command_t *str9x_cmd = register_command(cmd_ctx, NULL, "str9x", NULL, COMMAND_ANY, NULL);
+
+ register_command(cmd_ctx, str9x_cmd, "flash_config", str9x_handle_flash_config_command, COMMAND_EXEC,
+ "configure str9 flash controller");
+
+ return ERROR_OK;
+}
+
+int str9x_build_block_list(struct flash_bank_s *bank)
+{
+ str9x_flash_bank_t *str9x_info = bank->driver_priv;
+
+ int i;
+ int num_sectors = 0;
+ int b0_sectors = 0, b1_sectors = 0;
+
+ switch (bank->size)
+ {
+ case (256 * 1024):
+ b0_sectors = 4;
+ break;
+ case (512 * 1024):
+ b0_sectors = 8;
+ break;
+ case (32 * 1024):
+ b1_sectors = 4;
+ bank1start = bank->base;
+ break;
+ default:
+ ERROR("BUG: unknown bank->size encountered");
+ exit(-1);
+ }
+
+ num_sectors = b0_sectors + b1_sectors;
+
+ bank->num_sectors = num_sectors;
+ bank->sectors = malloc(sizeof(flash_sector_t) * num_sectors);
+ str9x_info->sector_bits = malloc(sizeof(u32) * num_sectors);
+
+ num_sectors = 0;
+
+ for (i = 0; i < b0_sectors; i++)
+ {
+ bank->sectors[num_sectors].offset = mem_layout_str9bank0[i].sector_start;
+ bank->sectors[num_sectors].size = mem_layout_str9bank0[i].sector_size;
+ bank->sectors[num_sectors].is_erased = -1;
+ bank->sectors[num_sectors].is_protected = 1;
+ str9x_info->sector_bits[num_sectors++] = mem_layout_str9bank0[i].sector_bit;
+ }
+
+ for (i = 0; i < b1_sectors; i++)
+ {
+ bank->sectors[num_sectors].offset = mem_layout_str9bank1[i].sector_start;
+ bank->sectors[num_sectors].size = mem_layout_str9bank1[i].sector_size;
+ bank->sectors[num_sectors].is_erased = -1;
+ bank->sectors[num_sectors].is_protected = 1;
+ str9x_info->sector_bits[num_sectors++] = mem_layout_str9bank1[i].sector_bit;
+ }
+
+ return ERROR_OK;
+}
+
+/* flash bank str9x <base> <size> 0 0 <target#>
+ */
+int str9x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
+{
+ str9x_flash_bank_t *str9x_info;
+
+ if (argc < 6)
+ {
+ WARNING("incomplete flash_bank str9x configuration");
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ str9x_info = malloc(sizeof(str9x_flash_bank_t));
+ bank->driver_priv = str9x_info;
+
+ str9x_build_block_list(bank);
+
+ str9x_info->write_algorithm = NULL;
+
+ return ERROR_OK;
+}
+
+int str9x_blank_check(struct flash_bank_s *bank, int first, int last)
+{
+ target_t *target = bank->target;
+ u8 *buffer;
+ int i;
+ int nBytes;
+
+ if ((first < 0) || (last > bank->num_sectors))
+ return ERROR_FLASH_SECTOR_INVALID;
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ buffer = malloc(256);
+
+ for (i = first; i <= last; i++)
+ {
+ bank->sectors[i].is_erased = 1;
+
+ target->type->read_memory(target, bank->base + bank->sectors[i].offset, 4, 256/4, buffer);
+
+ for (nBytes = 0; nBytes < 256; nBytes++)
+ {
+ if (buffer[nBytes] != 0xFF)
+ {
+ bank->sectors[i].is_erased = 0;
+ break;
+ }
+ }
+ }
+
+ free(buffer);
+
+ return ERROR_OK;
+}
+
+int str9x_protect_check(struct flash_bank_s *bank)
+{
+ str9x_flash_bank_t *str9x_info = bank->driver_priv;
+ target_t *target = bank->target;
+
+ int i;
+ u32 adr;
+ u16 status;
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ /* read level one protection */
+
+ adr = bank1start + 0x10;
+
+ target_write_u16(target, adr, 0x90);
+ target_read_u16(target, adr, &status);
+ target_write_u16(target, adr, 0xFF);
+
+ for (i = 0; i < bank->num_sectors; i++)
+ {
+ if (status & str9x_info->sector_bits[i])
+ bank->sectors[i].is_protected = 1;
+ else
+ bank->sectors[i].is_protected = 0;
+ }
+
+ return ERROR_OK;
+}
+
+int str9x_erase(struct flash_bank_s *bank, int first, int last)
+{
+ target_t *target = bank->target;
+ int i;
+ u32 adr;
+ u8 status;
+
+ for (i = first; i <= last; i++)
+ {
+ adr = bank->base + bank->sectors[i].offset;
+
+ /* erase sectors */
+ target_write_u16(target, adr, 0x20);
+ target_write_u16(target, adr, 0xD0);
+
+ /* get status */
+ target_write_u16(target, adr, 0x70);
+
+ while (1) {
+ target_read_u8(target, adr, &status);
+ if( status & 0x80 )
+ break;
+ usleep(1000);
+ }
+
+ /* clear status, also clear read array */
+ target_write_u16(target, adr, 0x50);
+
+ /* read array command */
+ target_write_u16(target, adr, 0xFF);
+
+ if( status & 0x22 )
+ {
+ ERROR("error erasing flash bank, status: 0x%x", status);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ }
+
+ for (i = first; i <= last; i++)
+ bank->sectors[i].is_erased = 1;
+
+ return ERROR_OK;
+}
+
+int str9x_protect(struct flash_bank_s *bank, int set, int first, int last)
+{
+ target_t *target = bank->target;
+ int i;
+ u32 adr;
+ u8 status;
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ for (i = first; i <= last; i++)
+ {
+ /* Level One Protection */
+
+ adr = bank->base + bank->sectors[i].offset;
+
+ target_write_u16(target, adr, 0x60);
+ if( set )
+ target_write_u16(target, adr, 0x01);
+ else
+ target_write_u16(target, adr, 0xD0);
+
+ /* query status */
+ target_read_u8(target, adr, &status);
+ }
+
+ return ERROR_OK;
+}
+
+int str9x_write_block(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
+{
+ str9x_flash_bank_t *str9x_info = bank->driver_priv;
+ target_t *target = bank->target;
+ u32 buffer_size = 8192;
+ working_area_t *source;
+ u32 address = bank->base + offset;
+ reg_param_t reg_params[4];
+ armv4_5_algorithm_t armv4_5_info;
+ int retval;
+
+ u32 str9x_flash_write_code[] = {
+ /* write: */
+ 0xe3c14003, /* bic r4, r1, #3 */
+ 0xe3a03040, /* mov r3, #0x40 */
+ 0xe1c430b0, /* strh r3, [r4, #0] */
+ 0xe0d030b2, /* ldrh r3, [r0], #2 */
+ 0xe0c130b2, /* strh r3, [r1], #2 */
+ 0xe3a03070, /* mov r3, #0x70 */
+ 0xe1c430b0, /* strh r3, [r4, #0] */
+ /* busy: */
+ 0xe5d43000, /* ldrb r3, [r4, #0] */
+ 0xe3130080, /* tst r3, #0x80 */
+ 0x0afffffc, /* beq busy */
+ 0xe3a05050, /* mov r5, #0x50 */
+ 0xe1c450b0, /* strh r5, [r4, #0] */
+ 0xe3a050ff, /* mov r5, #0xFF */
+ 0xe1c450b0, /* strh r5, [r4, #0] */
+ 0xe3130012, /* tst r3, #0x12 */
+ 0x1a000001, /* bne exit */
+ 0xe2522001, /* subs r2, r2, #1 */
+ 0x1affffed, /* bne write */
+ /* exit: */
+ 0xeafffffe, /* b exit */
+ };
+
+ /* flash write code */
+ if (target_alloc_working_area(target, 4 * 19, &str9x_info->write_algorithm) != ERROR_OK)
+ {
+ WARNING("no working area available, can't do block memory writes");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ };
+
+ target_write_buffer(target, str9x_info->write_algorithm->address, 19 * 4, (u8*)str9x_flash_write_code);
+
+ /* memory buffer */
+ while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK)
+ {
+ buffer_size /= 2;
+ if (buffer_size <= 256)
+ {
+ /* if we already allocated the writing code, but failed to get a buffer, free the algorithm */
+ if (str9x_info->write_algorithm)
+ target_free_working_area(target, str9x_info->write_algorithm);
+
+ WARNING("no large enough working area available, can't do block memory writes");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+ }
+
+ armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
+ armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
+ armv4_5_info.core_state = ARMV4_5_STATE_ARM;
+
+ init_reg_param(&reg_params[0], "r0", 32, PARAM_OUT);
+ init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT);
+ init_reg_param(&reg_params[2], "r2", 32, PARAM_OUT);
+ init_reg_param(&reg_params[3], "r3", 32, PARAM_IN);
+
+ while (count > 0)
+ {
+ u32 thisrun_count = (count > (buffer_size / 2)) ? (buffer_size / 2) : count;
+
+ target_write_buffer(target, source->address, thisrun_count * 2, buffer);
+
+ buf_set_u32(reg_params[0].value, 0, 32, source->address);
+ buf_set_u32(reg_params[1].value, 0, 32, address);
+ buf_set_u32(reg_params[2].value, 0, 32, thisrun_count);
+
+ if ((retval = target->type->run_algorithm(target, 0, NULL, 4, reg_params, str9x_info->write_algorithm->address, str9x_info->write_algorithm->address + (18 * 4), 10000, &armv4_5_info)) != ERROR_OK)
+ {
+ target_free_working_area(target, source);
+ target_free_working_area(target, str9x_info->write_algorithm);
+ ERROR("error executing str9x flash write algorithm");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ if (buf_get_u32(reg_params[3].value, 0, 32) != 0x80)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ buffer += thisrun_count * 2;
+ address += thisrun_count * 2;
+ count -= thisrun_count;
+ }
+
+ target_free_working_area(target, source);
+ target_free_working_area(target, str9x_info->write_algorithm);
+
+ destroy_reg_param(&reg_params[0]);
+ destroy_reg_param(&reg_params[1]);
+ destroy_reg_param(&reg_params[2]);
+ destroy_reg_param(&reg_params[3]);
+
+ return ERROR_OK;
+}
+
+int str9x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
+{
+ target_t *target = bank->target;
+ u32 words_remaining = (count / 2);
+ u32 bytes_remaining = (count & 0x00000001);
+ u32 address = bank->base + offset;
+ u32 bytes_written = 0;
+ u8 status;
+ u32 retval;
+ u32 check_address = offset;
+ u32 bank_adr;
+ int i;
+
+ if (offset & 0x1)
+ {
+ WARNING("offset 0x%x breaks required 2-byte alignment", offset);
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ }
+
+ for (i = 0; i < bank->num_sectors; i++)
+ {
+ u32 sec_start = bank->sectors[i].offset;
+ u32 sec_end = sec_start + bank->sectors[i].size;
+
+ /* check if destination falls within the current sector */
+ if ((check_address >= sec_start) && (check_address < sec_end))
+ {
+ /* check if destination ends in the current sector */
+ if (offset + count < sec_end)
+ check_address = offset + count;
+ else
+ check_address = sec_end;
+ }
+ }
+
+ if (check_address != offset + count)
+ return ERROR_FLASH_DST_OUT_OF_BANK;
+
+ /* multiple half words (2-byte) to be programmed? */
+ if (words_remaining > 0)
+ {
+ /* try using a block write */
+ if ((retval = str9x_write_block(bank, buffer, offset, words_remaining)) != ERROR_OK)
+ {
+ if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
+ {
+ /* if block write failed (no sufficient working area),
+ * we use normal (slow) single dword accesses */
+ WARNING("couldn't use block writes, falling back to single memory accesses");
+ }
+ else if (retval == ERROR_FLASH_OPERATION_FAILED)
+ {
+ ERROR("flash writing failed with error code: 0x%x", retval);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ }
+ else
+ {
+ buffer += words_remaining * 2;
+ address += words_remaining * 2;
+ words_remaining = 0;
+ }
+ }
+
+ while (words_remaining > 0)
+ {
+ bank_adr = address & ~0x03;
+
+ /* write data command */
+ target_write_u16(target, bank_adr, 0x40);
+ target->type->write_memory(target, address, 2, 1, buffer + bytes_written);
+
+ /* get status command */
+ target_write_u16(target, bank_adr, 0x70);
+
+ while (1) {
+ target_read_u8(target, bank_adr, &status);
+ if( status & 0x80 )
+ break;
+ usleep(1000);
+ }
+
+ /* clear status reg and read array */
+ target_write_u16(target, bank_adr, 0x50);
+ target_write_u16(target, bank_adr, 0xFF);
+
+ if (status & 0x10)
+ return ERROR_FLASH_OPERATION_FAILED;
+ else if (status & 0x02)
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ bytes_written += 2;
+ words_remaining--;
+ address += 2;
+ }
+
+ if (bytes_remaining)
+ {
+ u8 last_halfword[2] = {0xff, 0xff};
+ int i = 0;
+
+ while(bytes_remaining > 0)
+ {
+ last_halfword[i++] = *(buffer + bytes_written);
+ bytes_remaining--;
+ bytes_written++;
+ }
+
+ bank_adr = address & ~0x03;
+
+ /* write data comamnd */
+ target_write_u16(target, bank_adr, 0x40);
+ target->type->write_memory(target, address, 2, 1, last_halfword);
+
+ /* query status command */
+ target_write_u16(target, bank_adr, 0x70);
+
+ while (1) {
+ target_read_u8(target, bank_adr, &status);
+ if( status & 0x80 )
+ break;
+ usleep(1000);
+ }
+
+ /* clear status reg and read array */
+ target_write_u16(target, bank_adr, 0x50);
+ target_write_u16(target, bank_adr, 0xFF);
+
+ if (status & 0x10)
+ return ERROR_FLASH_OPERATION_FAILED;
+ else if (status & 0x02)
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ return ERROR_OK;
+}
+
+int str9x_probe(struct flash_bank_s *bank)
+{
+ return ERROR_OK;
+}
+
+int str9x_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ return ERROR_OK;
+}
+
+int str9x_erase_check(struct flash_bank_s *bank)
+{
+ return str9x_blank_check(bank, 0, bank->num_sectors - 1);
+}
+
+int str9x_info(struct flash_bank_s *bank, char *buf, int buf_size)
+{
+ snprintf(buf, buf_size, "str9x flash driver info" );
+ return ERROR_OK;
+}
+
+int str9x_handle_flash_config_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ str9x_flash_bank_t *str9x_info;
+ flash_bank_t *bank;
+ target_t *target = NULL;
+
+ if (argc < 5)
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!bank)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ str9x_info = bank->driver_priv;
+
+ target = bank->target;
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ /* config flash controller */
+ target_write_u32(target, FLASH_BBSR, strtoul(args[1], NULL, 0));
+ target_write_u32(target, FLASH_NBBSR, strtoul(args[2], NULL, 0));
+ target_write_u32(target, FLASH_BBADR, (strtoul(args[3], NULL, 0) >> 2));
+ target_write_u32(target, FLASH_NBBADR, (strtoul(args[4], NULL, 0) >> 2));
+
+ /* set bit 18 instruction TCM order as per flash programming manual */
+ arm966e_write_cp15(target, 62, 0x40000);
+
+ /* enable flash bank 1 */
+ target_write_u32(target, FLASH_CR, 0x18);
+ return ERROR_OK;
+}
diff --git a/src/flash/str9xpec.c b/src/flash/str9xpec.c
index 4d3093ee..4959df9f 100644
--- a/src/flash/str9xpec.c
+++ b/src/flash/str9xpec.c
@@ -1,1348 +1,1348 @@
-/***************************************************************************
- * Copyright (C) 2005 by Dominic Rath *
- * Dominic.Rath@gmx.de *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- ***************************************************************************/
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "replacements.h"
-
-#include "str9xpec.h"
-#include "flash.h"
-#include "target.h"
-#include "log.h"
-#include "armv4_5.h"
-#include "arm7_9_common.h"
-#include "jtag.h"
-#include "binarybuffer.h"
-
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <getopt.h>
-
-str9xpec_mem_layout_t mem_layout_str9pec[] = {
- {0x00000000, 0x10000, 0},
- {0x00010000, 0x10000, 1},
- {0x00020000, 0x10000, 2},
- {0x00030000, 0x10000, 3},
- {0x00040000, 0x10000, 4},
- {0x00050000, 0x10000, 5},
- {0x00060000, 0x10000, 6},
- {0x00070000, 0x10000, 7},
- {0x00080000, 0x02000, 32},
- {0x00082000, 0x02000, 33},
- {0x00084000, 0x02000, 34},
- {0x00086000, 0x02000, 35}
-};
-
-int str9xpec_register_commands(struct command_context_s *cmd_ctx);
-int str9xpec_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
-int str9xpec_erase(struct flash_bank_s *bank, int first, int last);
-int str9xpec_protect(struct flash_bank_s *bank, int set, int first, int last);
-int str9xpec_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
-int str9xpec_probe(struct flash_bank_s *bank);
-int str9xpec_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int str9xpec_protect_check(struct flash_bank_s *bank);
-int str9xpec_erase_check(struct flash_bank_s *bank);
-int str9xpec_info(struct flash_bank_s *bank, char *buf, int buf_size);
-
-int str9xpec_erase_area(struct flash_bank_s *bank, int first, int last);
-int str9xpec_set_address(struct flash_bank_s *bank, u8 sector);
-int str9xpec_write_options(struct flash_bank_s *bank);
-
-int str9xpec_handle_flash_options_cmap_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int str9xpec_handle_flash_options_lvdthd_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int str9xpec_handle_flash_options_lvdsel_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int str9xpec_handle_flash_options_lvdwarn_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int str9xpec_handle_flash_options_read_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int str9xpec_handle_flash_options_write_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int str9xpec_handle_flash_lock_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int str9xpec_handle_flash_unlock_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int str9xpec_handle_flash_enable_turbo_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int str9xpec_handle_flash_disable_turbo_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-
-flash_driver_t str9xpec_flash =
-{
- .name = "str9xpec",
- .register_commands = str9xpec_register_commands,
- .flash_bank_command = str9xpec_flash_bank_command,
- .erase = str9xpec_erase,
- .protect = str9xpec_protect,
- .write = str9xpec_write,
- .probe = str9xpec_probe,
- .auto_probe = str9xpec_probe,
- .erase_check = str9xpec_erase_check,
- .protect_check = str9xpec_protect_check,
- .info = str9xpec_info
-};
-
-int str9xpec_register_commands(struct command_context_s *cmd_ctx)
-{
- command_t *str9xpec_cmd = register_command(cmd_ctx, NULL, "str9xpec", NULL, COMMAND_ANY, "str9xpec flash specific commands");
-
- register_command(cmd_ctx, str9xpec_cmd, "enable_turbo", str9xpec_handle_flash_enable_turbo_command, COMMAND_EXEC,
- "enable str9xpec turbo mode");
- register_command(cmd_ctx, str9xpec_cmd, "disable_turbo", str9xpec_handle_flash_disable_turbo_command, COMMAND_EXEC,
- "disable str9xpec turbo mode");
- register_command(cmd_ctx, str9xpec_cmd, "options_cmap", str9xpec_handle_flash_options_cmap_command, COMMAND_EXEC,
- "configure str9xpec boot sector");
- register_command(cmd_ctx, str9xpec_cmd, "options_lvdthd", str9xpec_handle_flash_options_lvdthd_command, COMMAND_EXEC,
- "configure str9xpec lvd threshold");
- register_command(cmd_ctx, str9xpec_cmd, "options_lvdsel", str9xpec_handle_flash_options_lvdsel_command, COMMAND_EXEC,
- "configure str9xpec lvd selection");
- register_command(cmd_ctx, str9xpec_cmd, "options_lvdwarn", str9xpec_handle_flash_options_lvdwarn_command, COMMAND_EXEC,
- "configure str9xpec lvd warning");
- register_command(cmd_ctx, str9xpec_cmd, "options_read", str9xpec_handle_flash_options_read_command, COMMAND_EXEC,
- "read str9xpec options");
- register_command(cmd_ctx, str9xpec_cmd, "options_write", str9xpec_handle_flash_options_write_command, COMMAND_EXEC,
- "write str9xpec options");
- register_command(cmd_ctx, str9xpec_cmd, "lock", str9xpec_handle_flash_lock_command, COMMAND_EXEC,
- "lock str9xpec device");
- register_command(cmd_ctx, str9xpec_cmd, "unlock", str9xpec_handle_flash_unlock_command, COMMAND_EXEC,
- "unlock str9xpec device");
- register_command(cmd_ctx, str9xpec_cmd, "part_id", str9xpec_handle_part_id_command, COMMAND_EXEC,
- "print part id of str9xpec flash bank <num>");
-
- return ERROR_OK;
-}
-
-int str9xpec_set_instr(int chain_pos, u32 new_instr, enum tap_state end_state)
-{
- jtag_device_t *device = jtag_get_device(chain_pos);
-
- if (device == NULL)
- {
- DEBUG("Invalid Target");
- return ERROR_TARGET_INVALID;
- }
-
- if (buf_get_u32(device->cur_instr, 0, device->ir_length) != new_instr)
- {
- scan_field_t field;
-
- field.device = chain_pos;
- field.num_bits = device->ir_length;
- field.out_value = calloc(CEIL(field.num_bits, 8), 1);
- buf_set_u32(field.out_value, 0, field.num_bits, new_instr);
- field.out_mask = NULL;
- field.in_value = NULL;
- field.in_check_value = NULL;
- field.in_check_mask = NULL;
- field.in_handler = NULL;
- field.in_handler_priv = NULL;
-
- jtag_add_ir_scan(1, &field, end_state, NULL);
-
- free(field.out_value);
- }
-
- return ERROR_OK;
-}
-
-u8 str9xpec_isc_status(int chain_pos)
-{
- scan_field_t field;
- u8 status;
-
- if (str9xpec_set_instr(chain_pos, ISC_NOOP, TAP_PI) != ERROR_OK)
- return ISC_STATUS_ERROR;
-
- field.device = chain_pos;
- field.num_bits = 8;
- field.out_value = NULL;
- field.out_mask = NULL;
- field.in_value = &status;
- field.in_check_value = NULL;
- field.in_check_mask = NULL;
- field.in_handler = NULL;
- field.in_handler_priv = NULL;
-
- jtag_add_dr_scan(1, &field, TAP_RTI, NULL);
- jtag_execute_queue();
-
- DEBUG("status: 0x%2.2x", status);
-
- if (status & ISC_STATUS_SECURITY)
- INFO("Device Security Bit Set");
-
- return status;
-}
-
-int str9xpec_isc_enable(struct flash_bank_s *bank)
-{
- u8 status;
- u32 chain_pos;
- str9xpec_flash_controller_t *str9xpec_info = bank->driver_priv;
-
- chain_pos = str9xpec_info->chain_pos;
-
- if (str9xpec_info->isc_enable)
- return ERROR_OK;
-
- /* enter isc mode */
- if (str9xpec_set_instr(chain_pos, ISC_ENABLE, TAP_RTI) != ERROR_OK)
- return ERROR_TARGET_INVALID;
-
- /* check ISC status */
- status = str9xpec_isc_status(chain_pos);
- if (status & ISC_STATUS_MODE)
- {
- /* we have entered isc mode */
- str9xpec_info->isc_enable = 1;
- DEBUG("ISC_MODE Enabled");
- }
-
- return ERROR_OK;
-}
-
-int str9xpec_isc_disable(struct flash_bank_s *bank)
-{
- u8 status;
- u32 chain_pos;
- str9xpec_flash_controller_t *str9xpec_info = bank->driver_priv;
-
- chain_pos = str9xpec_info->chain_pos;
-
- if (!str9xpec_info->isc_enable)
- return ERROR_OK;
-
- if (str9xpec_set_instr(chain_pos, ISC_DISABLE, TAP_RTI) != ERROR_OK)
- return ERROR_TARGET_INVALID;
-
- /* delay to handle aborts */
- jtag_add_sleep(50);
-
- /* check ISC status */
- status = str9xpec_isc_status(chain_pos);
- if (!(status & ISC_STATUS_MODE))
- {
- /* we have left isc mode */
- str9xpec_info->isc_enable = 0;
- DEBUG("ISC_MODE Disabled");
- }
-
- return ERROR_OK;
-}
-
-int str9xpec_read_config(struct flash_bank_s *bank)
-{
- scan_field_t field;
- u8 status;
- u32 chain_pos;
-
- str9xpec_flash_controller_t *str9xpec_info = bank->driver_priv;
-
- chain_pos = str9xpec_info->chain_pos;
-
- DEBUG("ISC_CONFIGURATION");
-
- /* execute ISC_CONFIGURATION command */
- str9xpec_set_instr(chain_pos, ISC_CONFIGURATION, TAP_PI);
-
- field.device = chain_pos;
- field.num_bits = 64;
- field.out_value = NULL;
- field.out_mask = NULL;
- field.in_value = str9xpec_info->options;
- field.in_check_value = NULL;
- field.in_check_mask = NULL;
- field.in_handler = NULL;
- field.in_handler_priv = NULL;
-
- jtag_add_dr_scan(1, &field, TAP_RTI, NULL);
- jtag_execute_queue();
-
- status = str9xpec_isc_status(chain_pos);
-
- return status;
-}
-
-int str9xpec_build_block_list(struct flash_bank_s *bank)
-{
- str9xpec_flash_controller_t *str9xpec_info = bank->driver_priv;
-
- int i;
- int num_sectors = 0, b0_sectors = 0;
-
- switch (bank->size)
- {
- case (256 * 1024):
- b0_sectors = 4;
- break;
- case (512 * 1024):
- b0_sectors = 8;
- break;
- default:
- ERROR("BUG: unknown bank->size encountered");
- exit(-1);
- }
-
- /* include bank 1 sectors */
- num_sectors = b0_sectors + 4;
- bank->size += (32 * 1024);
-
- bank->num_sectors = num_sectors;
- bank->sectors = malloc(sizeof(flash_sector_t) * num_sectors);
- str9xpec_info->sector_bits = malloc(sizeof(u32) * num_sectors);
-
- num_sectors = 0;
-
- for (i = 0; i < b0_sectors; i++)
- {
- bank->sectors[num_sectors].offset = mem_layout_str9pec[i].sector_start;
- bank->sectors[num_sectors].size = mem_layout_str9pec[i].sector_size;
- bank->sectors[num_sectors].is_erased = -1;
- bank->sectors[num_sectors].is_protected = 1;
- str9xpec_info->sector_bits[num_sectors++] = mem_layout_str9pec[i].sector_bit;
- }
-
- for (i = 8; i < 12; i++)
- {
- bank->sectors[num_sectors].offset = mem_layout_str9pec[i].sector_start;
- bank->sectors[num_sectors].size = mem_layout_str9pec[i].sector_size;
- bank->sectors[num_sectors].is_erased = -1;
- bank->sectors[num_sectors].is_protected = 1;
- str9xpec_info->sector_bits[num_sectors++] = mem_layout_str9pec[i].sector_bit;
- }
-
- return ERROR_OK;
-}
-
-/* flash bank str9x <base> <size> 0 0 <target#>
- */
-int str9xpec_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
-{
- str9xpec_flash_controller_t *str9xpec_info;
- armv4_5_common_t *armv4_5 = NULL;
- arm7_9_common_t *arm7_9 = NULL;
- arm_jtag_t *jtag_info = NULL;
-
- if (argc < 6)
- {
- WARNING("incomplete flash_bank str9x configuration");
- return ERROR_FLASH_BANK_INVALID;
- }
-
- str9xpec_info = malloc(sizeof(str9xpec_flash_controller_t));
- bank->driver_priv = str9xpec_info;
-
- if (bank->base != 0x00000000)
- {
- WARNING("overriding flash base address for STR91x device with 0x00000000");
- bank->base = 0x00000000;
- }
-
- /* find out jtag position of flash controller
- * it is always after the arm966 core */
-
- armv4_5 = bank->target->arch_info;
- arm7_9 = armv4_5->arch_info;
- jtag_info = &arm7_9->jtag_info;
-
- str9xpec_info->chain_pos = (jtag_info->chain_pos - 1);
- str9xpec_info->isc_enable = 0;
- str9xpec_info->devarm = NULL;
-
- str9xpec_build_block_list(bank);
-
- /* clear option byte register */
- buf_set_u32(str9xpec_info->options, 0, 64, 0);
-
- return ERROR_OK;
-}
-
-int str9xpec_blank_check(struct flash_bank_s *bank, int first, int last)
-{
- scan_field_t field;
- u8 status;
- u32 chain_pos;
- int i;
- u8 *buffer = NULL;
-
- str9xpec_flash_controller_t *str9xpec_info = bank->driver_priv;
-
- chain_pos = str9xpec_info->chain_pos;
-
- if (!str9xpec_info->isc_enable) {
- str9xpec_isc_enable( bank );
- }
-
- if (!str9xpec_info->isc_enable) {
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- buffer = calloc(CEIL(64, 8), 1);
-
- DEBUG("blank check: first_bank: %i, last_bank: %i", first, last);
-
- for (i = first; i <= last; i++) {
- buf_set_u32(buffer, str9xpec_info->sector_bits[i], 1, 1);
- }
-
- /* execute ISC_BLANK_CHECK command */
- str9xpec_set_instr(chain_pos, ISC_BLANK_CHECK, TAP_PI);
-
- field.device = chain_pos;
- field.num_bits = 64;
- field.out_value = buffer;
- field.out_mask = NULL;
- field.in_value = NULL;
- field.in_check_value = NULL;
- field.in_check_mask = NULL;
- field.in_handler = NULL;
- field.in_handler_priv = NULL;
-
- jtag_add_dr_scan(1, &field, TAP_RTI, NULL);
- jtag_add_sleep(40000);
-
- /* read blank check result */
- field.device = chain_pos;
- field.num_bits = 64;
- field.out_value = NULL;
- field.out_mask = NULL;
- field.in_value = buffer;
- field.in_check_value = NULL;
- field.in_check_mask = NULL;
- field.in_handler = NULL;
- field.in_handler_priv = NULL;
-
- jtag_add_dr_scan(1, &field, TAP_PI, NULL);
- jtag_execute_queue();
-
- status = str9xpec_isc_status(chain_pos);
-
- for (i = first; i <= last; i++)
- {
- if (buf_get_u32(buffer, str9xpec_info->sector_bits[i], 1))
- bank->sectors[i].is_erased = 0;
- else
- bank->sectors[i].is_erased = 1;
- }
-
- free(buffer);
-
- str9xpec_isc_disable(bank);
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
- return ERROR_OK;
-}
-
-int str9xpec_protect_check(struct flash_bank_s *bank)
-{
- u8 status;
- int i;
-
- str9xpec_flash_controller_t *str9xpec_info = bank->driver_priv;
-
- status = str9xpec_read_config(bank);
-
- for (i = 0; i < bank->num_sectors; i++)
- {
- if (buf_get_u32(str9xpec_info->options, str9xpec_info->sector_bits[i], 1))
- bank->sectors[i].is_protected = 1;
- else
- bank->sectors[i].is_protected = 0;
- }
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
- return ERROR_OK;
-}
-
-int str9xpec_erase_area(struct flash_bank_s *bank, int first, int last)
-{
- scan_field_t field;
- u8 status;
- u32 chain_pos;
- int i;
- u8 *buffer = NULL;
-
- str9xpec_flash_controller_t *str9xpec_info = bank->driver_priv;
-
- chain_pos = str9xpec_info->chain_pos;
-
- if (!str9xpec_info->isc_enable) {
- str9xpec_isc_enable( bank );
- }
-
- if (!str9xpec_info->isc_enable) {
- return ISC_STATUS_ERROR;
- }
-
- buffer = calloc(CEIL(64, 8), 1);
-
- DEBUG("erase: first_bank: %i, last_bank: %i", first, last);
-
- /* last bank: 0xFF signals a full erase (unlock complete device) */
- /* last bank: 0xFE signals a option byte erase */
- if (last == 0xFF)
- {
- for (i = 0; i < 64; i++) {
- buf_set_u32(buffer, i, 1, 1);
- }
- }
- else if (last == 0xFE)
- {
- buf_set_u32(buffer, 49, 1, 1);
- }
- else
- {
- for (i = first; i <= last; i++) {
- buf_set_u32(buffer, str9xpec_info->sector_bits[i], 1, 1);
- }
- }
-
- DEBUG("ISC_ERASE");
-
- /* execute ISC_ERASE command */
- str9xpec_set_instr(chain_pos, ISC_ERASE, TAP_PI);
-
- field.device = chain_pos;
- field.num_bits = 64;
- field.out_value = buffer;
- field.out_mask = NULL;
- field.in_value = NULL;
- field.in_check_value = NULL;
- field.in_check_mask = NULL;
- field.in_handler = NULL;
- field.in_handler_priv = NULL;
-
- jtag_add_dr_scan(1, &field, TAP_RTI, NULL);
- jtag_execute_queue();
-
- jtag_add_sleep(10);
-
- /* wait for erase completion */
- while (!((status = str9xpec_isc_status(chain_pos)) & ISC_STATUS_BUSY)) {
- usleep(1000);
- }
-
- free(buffer);
-
- str9xpec_isc_disable(bank);
-
- return status;
-}
-
-int str9xpec_erase(struct flash_bank_s *bank, int first, int last)
-{
- int status;
-
- status = str9xpec_erase_area(bank, first, last);
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
-
- return ERROR_OK;
-}
-
-int str9xpec_lock_device(struct flash_bank_s *bank)
-{
- scan_field_t field;
- u8 status;
- u32 chain_pos;
- str9xpec_flash_controller_t *str9xpec_info = NULL;
-
- str9xpec_info = bank->driver_priv;
- chain_pos = str9xpec_info->chain_pos;
-
- if (!str9xpec_info->isc_enable) {
- str9xpec_isc_enable( bank );
- }
-
- if (!str9xpec_info->isc_enable) {
- return ISC_STATUS_ERROR;
- }
-
- /* set security address */
- str9xpec_set_address(bank, 0x80);
-
- /* execute ISC_PROGRAM command */
- str9xpec_set_instr(chain_pos, ISC_PROGRAM_SECURITY, TAP_RTI);
-
- str9xpec_set_instr(chain_pos, ISC_NOOP, TAP_PI);
-
- do {
- field.device = chain_pos;
- field.num_bits = 8;
- field.out_value = NULL;
- field.out_mask = NULL;
- field.in_value = &status;
- field.in_check_value = NULL;
- field.in_check_mask = NULL;
- field.in_handler = NULL;
- field.in_handler_priv = NULL;
-
- jtag_add_dr_scan(1, &field, -1, NULL);
- jtag_execute_queue();
-
- } while(!(status & ISC_STATUS_BUSY));
-
- str9xpec_isc_disable(bank);
-
- return status;
-}
-
-int str9xpec_unlock_device(struct flash_bank_s *bank)
-{
- u8 status;
-
- status = str9xpec_erase_area(bank, 0, 255);
-
- return status;
-}
-
-int str9xpec_protect(struct flash_bank_s *bank, int set, int first, int last)
-{
- u8 status;
- int i;
-
- str9xpec_flash_controller_t *str9xpec_info = bank->driver_priv;
-
- status = str9xpec_read_config(bank);
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
-
- DEBUG("protect: first_bank: %i, last_bank: %i", first, last);
-
- /* last bank: 0xFF signals a full device protect */
- if (last == 0xFF)
- {
- if( set )
- {
- status = str9xpec_lock_device(bank);
- }
- else
- {
- /* perform full erase to unlock device */
- status = str9xpec_unlock_device(bank);
- }
- }
- else
- {
- for (i = first; i <= last; i++)
- {
- if( set )
- buf_set_u32(str9xpec_info->options, str9xpec_info->sector_bits[i], 1, 1);
- else
- buf_set_u32(str9xpec_info->options, str9xpec_info->sector_bits[i], 1, 0);
- }
-
- status = str9xpec_write_options(bank);
- }
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
-
- return ERROR_OK;
-}
-
-int str9xpec_set_address(struct flash_bank_s *bank, u8 sector)
-{
- u32 chain_pos;
- scan_field_t field;
- str9xpec_flash_controller_t *str9xpec_info = bank->driver_priv;
-
- chain_pos = str9xpec_info->chain_pos;
-
- /* set flash controller address */
- str9xpec_set_instr(chain_pos, ISC_ADDRESS_SHIFT, TAP_PI);
-
- field.device = chain_pos;
- field.num_bits = 8;
- field.out_value = &sector;
- field.out_mask = NULL;
- field.in_value = NULL;
- field.in_check_value = NULL;
- field.in_check_mask = NULL;
- field.in_handler = NULL;
- field.in_handler_priv = NULL;
-
- jtag_add_dr_scan(1, &field, -1, NULL);
-
- return ERROR_OK;
-}
-
-int str9xpec_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
-{
- str9xpec_flash_controller_t *str9xpec_info = bank->driver_priv;
- u32 dwords_remaining = (count / 8);
- u32 bytes_remaining = (count & 0x00000007);
- u32 bytes_written = 0;
- u8 status;
- u32 check_address = offset;
- u32 chain_pos;
- scan_field_t field;
- u8 *scanbuf;
- int i;
- u32 first_sector = 0;
- u32 last_sector = 0;
-
- chain_pos = str9xpec_info->chain_pos;
-
- if (!str9xpec_info->isc_enable) {
- str9xpec_isc_enable(bank);
- }
-
- if (!str9xpec_info->isc_enable) {
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- if (offset & 0x7)
- {
- WARNING("offset 0x%x breaks required 8-byte alignment", offset);
- return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
- }
-
- for (i = 0; i < bank->num_sectors; i++)
- {
- u32 sec_start = bank->sectors[i].offset;
- u32 sec_end = sec_start + bank->sectors[i].size;
-
- /* check if destination falls within the current sector */
- if ((check_address >= sec_start) && (check_address < sec_end))
- {
- /* check if destination ends in the current sector */
- if (offset + count < sec_end)
- check_address = offset + count;
- else
- check_address = sec_end;
- }
-
- if ((offset >= sec_start) && (offset < sec_end)){
- first_sector = i;
- }
-
- if ((offset + count >= sec_start) && (offset + count < sec_end)){
- last_sector = i;
- }
- }
-
- if (check_address != offset + count)
- return ERROR_FLASH_DST_OUT_OF_BANK;
-
- DEBUG("first_sector: %i, last_sector: %i", first_sector, last_sector);
-
- scanbuf = calloc(CEIL(64, 8), 1);
-
- DEBUG("ISC_PROGRAM");
-
- for (i = first_sector; i <= last_sector; i++)
- {
- str9xpec_set_address(bank, str9xpec_info->sector_bits[i]);
-
- dwords_remaining = dwords_remaining < (bank->sectors[i].size/8) ? dwords_remaining : (bank->sectors[i].size/8);
-
- while (dwords_remaining > 0)
- {
- str9xpec_set_instr(chain_pos, ISC_PROGRAM, TAP_PI);
-
- field.device = chain_pos;
- field.num_bits = 64;
- field.out_value = (buffer + bytes_written);
- field.out_mask = NULL;
- field.in_value = NULL;
- field.in_check_value = NULL;
- field.in_check_mask = NULL;
- field.in_handler = NULL;
- field.in_handler_priv = NULL;
-
- jtag_add_dr_scan(1, &field, TAP_RTI, NULL);
-
- /* small delay before polling */
- jtag_add_sleep(50);
-
- str9xpec_set_instr(chain_pos, ISC_NOOP, TAP_PI);
-
- do {
- field.device = chain_pos;
- field.num_bits = 8;
- field.out_value = NULL;
- field.out_mask = NULL;
- field.in_value = scanbuf;
- field.in_check_value = NULL;
- field.in_check_mask = NULL;
- field.in_handler = NULL;
- field.in_handler_priv = NULL;
-
- jtag_add_dr_scan(1, &field, -1, NULL);
- jtag_execute_queue();
-
- status = buf_get_u32(scanbuf, 0, 8);
-
- } while(!(status & ISC_STATUS_BUSY));
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
-
- //if ((status & ISC_STATUS_INT_ERROR) != STR9XPEC_ISC_INTFAIL)
- // return ERROR_FLASH_OPERATION_FAILED;
-
- dwords_remaining--;
- bytes_written += 8;
- }
- }
-
- if (bytes_remaining)
- {
- u8 last_dword[8] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
- int i = 0;
-
- while(bytes_remaining > 0)
- {
- last_dword[i++] = *(buffer + bytes_written);
- bytes_remaining--;
- bytes_written++;
- }
-
- str9xpec_set_instr(chain_pos, ISC_PROGRAM, TAP_PI);
-
- field.device = chain_pos;
- field.num_bits = 64;
- field.out_value = last_dword;
- field.out_mask = NULL;
- field.in_value = NULL;
- field.in_check_value = NULL;
- field.in_check_mask = NULL;
- field.in_handler = NULL;
- field.in_handler_priv = NULL;
-
- jtag_add_dr_scan(1, &field, TAP_RTI, NULL);
-
- /* small delay before polling */
- jtag_add_sleep(50);
-
- str9xpec_set_instr(chain_pos, ISC_NOOP, TAP_PI);
-
- do {
- field.device = chain_pos;
- field.num_bits = 8;
- field.out_value = NULL;
- field.out_mask = NULL;
- field.in_value = scanbuf;
- field.in_check_value = NULL;
- field.in_check_mask = NULL;
- field.in_handler = NULL;
- field.in_handler_priv = NULL;
-
- jtag_add_dr_scan(1, &field, -1, NULL);
- jtag_execute_queue();
-
- status = buf_get_u32(scanbuf, 0, 8);
-
- } while(!(status & ISC_STATUS_BUSY));
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
-
- //if ((status & ISC_STATUS_INT_ERROR) != STR9XPEC_ISC_INTFAIL)
- // return ERROR_FLASH_OPERATION_FAILED;
- }
-
- free(scanbuf);
-
- str9xpec_isc_disable(bank);
-
- return ERROR_OK;
-}
-
-int str9xpec_probe(struct flash_bank_s *bank)
-{
- return ERROR_OK;
-}
-
-int str9xpec_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *bank;
- scan_field_t field;
- u8 *buffer = NULL;
- u32 chain_pos;
- u32 idcode;
- str9xpec_flash_controller_t *str9xpec_info = NULL;
-
- if (argc < 1)
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!bank)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- str9xpec_info = bank->driver_priv;
- chain_pos = str9xpec_info->chain_pos;
-
- buffer = calloc(CEIL(32, 8), 1);
-
- str9xpec_set_instr(chain_pos, ISC_IDCODE, TAP_PI);
-
- field.device = chain_pos;
- field.num_bits = 32;
- field.out_value = NULL;
- field.out_mask = NULL;
- field.in_value = buffer;
- field.in_check_value = NULL;
- field.in_check_mask = NULL;
- field.in_handler = NULL;
- field.in_handler_priv = NULL;
-
- jtag_add_dr_scan(1, &field, TAP_RTI, NULL);
- jtag_execute_queue();
-
- idcode = buf_get_u32(buffer, 0, 32);
-
- command_print(cmd_ctx, "str9xpec part id: 0x%8.8x", idcode);
-
- free(buffer);
-
- return ERROR_OK;
-}
-
-int str9xpec_erase_check(struct flash_bank_s *bank)
-{
- return str9xpec_blank_check(bank, 0, bank->num_sectors - 1);
-}
-
-int str9xpec_info(struct flash_bank_s *bank, char *buf, int buf_size)
-{
- snprintf(buf, buf_size, "str9xpec flash driver info" );
- return ERROR_OK;
-}
-
-int str9xpec_handle_flash_options_read_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *bank;
- u8 status;
- str9xpec_flash_controller_t *str9xpec_info = NULL;
-
- if (argc < 1)
- {
- command_print(cmd_ctx, "str9xpec options_read <bank>");
- return ERROR_OK;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!bank)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- str9xpec_info = bank->driver_priv;
-
- status = str9xpec_read_config(bank);
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
-
- /* boot bank */
- if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_CSMAPBIT, 1))
- command_print(cmd_ctx, "CS Map: bank1");
- else
- command_print(cmd_ctx, "CS Map: bank0");
-
- /* OTP lock */
- if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_OTPBIT, 1))
- command_print(cmd_ctx, "OTP Lock: OTP Locked");
- else
- command_print(cmd_ctx, "OTP Lock: OTP Unlocked");
-
- /* LVD Threshold */
- if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_LVDTHRESBIT, 1))
- command_print(cmd_ctx, "LVD Threshold: 2.7v");
- else
- command_print(cmd_ctx, "LVD Threshold: 2.4v");
-
- /* LVD reset warning */
- if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_LVDWARNBIT, 1))
- command_print(cmd_ctx, "LVD Reset Warning: VDD or VDDQ Inputs");
- else
- command_print(cmd_ctx, "LVD Reset Warning: VDD Input Only");
-
- /* LVD reset select */
- if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_LVDSELBIT, 1))
- command_print(cmd_ctx, "LVD Reset Selection: VDD or VDDQ Inputs");
- else
- command_print(cmd_ctx, "LVD Reset Selection: VDD Input Only");
-
- return ERROR_OK;
-}
-
-int str9xpec_write_options(struct flash_bank_s *bank)
-{
- scan_field_t field;
- u8 status;
- u32 chain_pos;
- str9xpec_flash_controller_t *str9xpec_info = NULL;
-
- str9xpec_info = bank->driver_priv;
- chain_pos = str9xpec_info->chain_pos;
-
- /* erase config options first */
- status = str9xpec_erase_area( bank, 0xFE, 0xFE );
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return status;
-
- if (!str9xpec_info->isc_enable) {
- str9xpec_isc_enable( bank );
- }
-
- if (!str9xpec_info->isc_enable) {
- return ISC_STATUS_ERROR;
- }
-
- /* according to data 64th bit has to be set */
- buf_set_u32(str9xpec_info->options, 63, 1, 1);
-
- /* set option byte address */
- str9xpec_set_address(bank, 0x50);
-
- /* execute ISC_PROGRAM command */
- str9xpec_set_instr(chain_pos, ISC_PROGRAM, TAP_PI);
-
- field.device = chain_pos;
- field.num_bits = 64;
- field.out_value = str9xpec_info->options;
- field.out_mask = NULL;
- field.in_value = NULL;
- field.in_check_value = NULL;
- field.in_check_mask = NULL;
- field.in_handler = NULL;
- field.in_handler_priv = NULL;
-
- jtag_add_dr_scan(1, &field, TAP_RTI, NULL);
-
- /* small delay before polling */
- jtag_add_sleep(50);
-
- str9xpec_set_instr(chain_pos, ISC_NOOP, TAP_PI);
-
- do {
- field.device = chain_pos;
- field.num_bits = 8;
- field.out_value = NULL;
- field.out_mask = NULL;
- field.in_value = &status;
- field.in_check_value = NULL;
- field.in_check_mask = NULL;
- field.in_handler = NULL;
- field.in_handler_priv = NULL;
-
- jtag_add_dr_scan(1, &field, -1, NULL);
- jtag_execute_queue();
-
- } while(!(status & ISC_STATUS_BUSY));
-
- str9xpec_isc_disable(bank);
-
- return status;
-}
-
-int str9xpec_handle_flash_options_write_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *bank;
- u8 status;
-
- if (argc < 1)
- {
- command_print(cmd_ctx, "str9xpec options_write <bank>");
- return ERROR_OK;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!bank)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- status = str9xpec_write_options(bank);
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
-
- return ERROR_OK;
-}
-
-int str9xpec_handle_flash_options_cmap_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *bank;
- str9xpec_flash_controller_t *str9xpec_info = NULL;
-
- if (argc < 2)
- {
- command_print(cmd_ctx, "str9xpec options_cmap <bank> <bank0|bank1>");
- return ERROR_OK;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!bank)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- str9xpec_info = bank->driver_priv;
-
- if (strcmp(args[1], "bank1") == 0)
- {
- buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_CSMAPBIT, 1, 1);
- }
- else
- {
- buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_CSMAPBIT, 1, 0);
- }
-
- return ERROR_OK;
-}
-
-int str9xpec_handle_flash_options_lvdthd_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *bank;
- str9xpec_flash_controller_t *str9xpec_info = NULL;
-
- if (argc < 2)
- {
- command_print(cmd_ctx, "str9xpec options_lvdthd <bank> <2.4v|2.7v>");
- return ERROR_OK;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!bank)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- str9xpec_info = bank->driver_priv;
-
- if (strcmp(args[1], "2.7v") == 0)
- {
- buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDTHRESBIT, 1, 1);
- }
- else
- {
- buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDTHRESBIT, 1, 0);
- }
-
- return ERROR_OK;
-}
-
-int str9xpec_handle_flash_options_lvdsel_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *bank;
- str9xpec_flash_controller_t *str9xpec_info = NULL;
-
- if (argc < 2)
- {
- command_print(cmd_ctx, "str9xpec options_lvdsel <bank> <vdd|vdd_vddq>");
- return ERROR_OK;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!bank)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- str9xpec_info = bank->driver_priv;
-
- if (strcmp(args[1], "vdd_vddq") == 0)
- {
- buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDSELBIT, 1, 1);
- }
- else
- {
- buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDSELBIT, 1, 0);
- }
-
- return ERROR_OK;
-}
-
-int str9xpec_handle_flash_options_lvdwarn_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *bank;
- str9xpec_flash_controller_t *str9xpec_info = NULL;
-
- if (argc < 2)
- {
- command_print(cmd_ctx, "str9xpec options_lvdwarn <bank> <vdd|vdd_vddq>");
- return ERROR_OK;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!bank)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- str9xpec_info = bank->driver_priv;
-
- if (strcmp(args[1], "vdd_vddq") == 0)
- {
- buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDWARNBIT, 1, 1);
- }
- else
- {
- buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDWARNBIT, 1, 0);
- }
-
- return ERROR_OK;
-}
-
-int str9xpec_handle_flash_lock_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- u8 status;
- flash_bank_t *bank;
-
- if (argc < 1)
- {
- command_print(cmd_ctx, "str9xpec lock <bank>");
- return ERROR_OK;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!bank)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- status = str9xpec_lock_device(bank);
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
-
- return ERROR_OK;
-}
-
-int str9xpec_handle_flash_unlock_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- u8 status;
- flash_bank_t *bank;
-
- if (argc < 1)
- {
- command_print(cmd_ctx, "str9xpec unlock <bank>");
- return ERROR_OK;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!bank)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- status = str9xpec_unlock_device(bank);
-
- if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
- return ERROR_FLASH_OPERATION_FAILED;
-
- return ERROR_OK;
-}
-
-int str9xpec_handle_flash_enable_turbo_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *bank;
- u32 chain_pos;
- jtag_device_t* dev0;
- jtag_device_t* dev2;
- str9xpec_flash_controller_t *str9xpec_info = NULL;
-
- if (argc < 1)
- {
- command_print(cmd_ctx, "str9xpec enable_turbo <bank>");
- return ERROR_OK;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!bank)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- str9xpec_info = bank->driver_priv;
-
- chain_pos = str9xpec_info->chain_pos;
-
- /* remove arm core from chain - enter turbo mode */
-
- str9xpec_set_instr(chain_pos+2, 0xD, TAP_RTI);
- jtag_execute_queue();
-
- /* modify scan chain - str9 core has been removed */
- dev0 = jtag_get_device(chain_pos);
- str9xpec_info->devarm = jtag_get_device(chain_pos+1);
- dev2 = jtag_get_device(chain_pos+2);
- dev0->next = dev2;
- jtag_num_devices--;
-
- return ERROR_OK;
-}
-
-int str9xpec_handle_flash_disable_turbo_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *bank;
- u32 chain_pos;
- jtag_device_t* dev0;
- str9xpec_flash_controller_t *str9xpec_info = NULL;
-
- if (argc < 1)
- {
- command_print(cmd_ctx, "str9xpec disable_turbo <bank>");
- return ERROR_OK;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!bank)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- str9xpec_info = bank->driver_priv;
-
- chain_pos = str9xpec_info->chain_pos;
-
- dev0 = jtag_get_device(chain_pos);
-
- /* exit turbo mode via TLR */
- str9xpec_set_instr(chain_pos, ISC_NOOP, TAP_TLR);
- jtag_execute_queue();
-
- /* restore previous scan chain */
- if( str9xpec_info->devarm ) {
- dev0->next = str9xpec_info->devarm;
- jtag_num_devices++;
- str9xpec_info->devarm = NULL;
- }
-
- return ERROR_OK;
-}
+/***************************************************************************
+ * Copyright (C) 2005 by Dominic Rath *
+ * Dominic.Rath@gmx.de *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "replacements.h"
+
+#include "str9xpec.h"
+#include "flash.h"
+#include "target.h"
+#include "log.h"
+#include "armv4_5.h"
+#include "arm7_9_common.h"
+#include "jtag.h"
+#include "binarybuffer.h"
+
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <getopt.h>
+
+str9xpec_mem_layout_t mem_layout_str9pec[] = {
+ {0x00000000, 0x10000, 0},
+ {0x00010000, 0x10000, 1},
+ {0x00020000, 0x10000, 2},
+ {0x00030000, 0x10000, 3},
+ {0x00040000, 0x10000, 4},
+ {0x00050000, 0x10000, 5},
+ {0x00060000, 0x10000, 6},
+ {0x00070000, 0x10000, 7},
+ {0x00080000, 0x02000, 32},
+ {0x00082000, 0x02000, 33},
+ {0x00084000, 0x02000, 34},
+ {0x00086000, 0x02000, 35}
+};
+
+int str9xpec_register_commands(struct command_context_s *cmd_ctx);
+int str9xpec_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
+int str9xpec_erase(struct flash_bank_s *bank, int first, int last);
+int str9xpec_protect(struct flash_bank_s *bank, int set, int first, int last);
+int str9xpec_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
+int str9xpec_probe(struct flash_bank_s *bank);
+int str9xpec_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int str9xpec_protect_check(struct flash_bank_s *bank);
+int str9xpec_erase_check(struct flash_bank_s *bank);
+int str9xpec_info(struct flash_bank_s *bank, char *buf, int buf_size);
+
+int str9xpec_erase_area(struct flash_bank_s *bank, int first, int last);
+int str9xpec_set_address(struct flash_bank_s *bank, u8 sector);
+int str9xpec_write_options(struct flash_bank_s *bank);
+
+int str9xpec_handle_flash_options_cmap_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int str9xpec_handle_flash_options_lvdthd_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int str9xpec_handle_flash_options_lvdsel_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int str9xpec_handle_flash_options_lvdwarn_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int str9xpec_handle_flash_options_read_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int str9xpec_handle_flash_options_write_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int str9xpec_handle_flash_lock_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int str9xpec_handle_flash_unlock_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int str9xpec_handle_flash_enable_turbo_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int str9xpec_handle_flash_disable_turbo_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+
+flash_driver_t str9xpec_flash =
+{
+ .name = "str9xpec",
+ .register_commands = str9xpec_register_commands,
+ .flash_bank_command = str9xpec_flash_bank_command,
+ .erase = str9xpec_erase,
+ .protect = str9xpec_protect,
+ .write = str9xpec_write,
+ .probe = str9xpec_probe,
+ .auto_probe = str9xpec_probe,
+ .erase_check = str9xpec_erase_check,
+ .protect_check = str9xpec_protect_check,
+ .info = str9xpec_info
+};
+
+int str9xpec_register_commands(struct command_context_s *cmd_ctx)
+{
+ command_t *str9xpec_cmd = register_command(cmd_ctx, NULL, "str9xpec", NULL, COMMAND_ANY, "str9xpec flash specific commands");
+
+ register_command(cmd_ctx, str9xpec_cmd, "enable_turbo", str9xpec_handle_flash_enable_turbo_command, COMMAND_EXEC,
+ "enable str9xpec turbo mode");
+ register_command(cmd_ctx, str9xpec_cmd, "disable_turbo", str9xpec_handle_flash_disable_turbo_command, COMMAND_EXEC,
+ "disable str9xpec turbo mode");
+ register_command(cmd_ctx, str9xpec_cmd, "options_cmap", str9xpec_handle_flash_options_cmap_command, COMMAND_EXEC,
+ "configure str9xpec boot sector");
+ register_command(cmd_ctx, str9xpec_cmd, "options_lvdthd", str9xpec_handle_flash_options_lvdthd_command, COMMAND_EXEC,
+ "configure str9xpec lvd threshold");
+ register_command(cmd_ctx, str9xpec_cmd, "options_lvdsel", str9xpec_handle_flash_options_lvdsel_command, COMMAND_EXEC,
+ "configure str9xpec lvd selection");
+ register_command(cmd_ctx, str9xpec_cmd, "options_lvdwarn", str9xpec_handle_flash_options_lvdwarn_command, COMMAND_EXEC,
+ "configure str9xpec lvd warning");
+ register_command(cmd_ctx, str9xpec_cmd, "options_read", str9xpec_handle_flash_options_read_command, COMMAND_EXEC,
+ "read str9xpec options");
+ register_command(cmd_ctx, str9xpec_cmd, "options_write", str9xpec_handle_flash_options_write_command, COMMAND_EXEC,
+ "write str9xpec options");
+ register_command(cmd_ctx, str9xpec_cmd, "lock", str9xpec_handle_flash_lock_command, COMMAND_EXEC,
+ "lock str9xpec device");
+ register_command(cmd_ctx, str9xpec_cmd, "unlock", str9xpec_handle_flash_unlock_command, COMMAND_EXEC,
+ "unlock str9xpec device");
+ register_command(cmd_ctx, str9xpec_cmd, "part_id", str9xpec_handle_part_id_command, COMMAND_EXEC,
+ "print part id of str9xpec flash bank <num>");
+
+ return ERROR_OK;
+}
+
+int str9xpec_set_instr(int chain_pos, u32 new_instr, enum tap_state end_state)
+{
+ jtag_device_t *device = jtag_get_device(chain_pos);
+
+ if (device == NULL)
+ {
+ DEBUG("Invalid Target");
+ return ERROR_TARGET_INVALID;
+ }
+
+ if (buf_get_u32(device->cur_instr, 0, device->ir_length) != new_instr)
+ {
+ scan_field_t field;
+
+ field.device = chain_pos;
+ field.num_bits = device->ir_length;
+ field.out_value = calloc(CEIL(field.num_bits, 8), 1);
+ buf_set_u32(field.out_value, 0, field.num_bits, new_instr);
+ field.out_mask = NULL;
+ field.in_value = NULL;
+ field.in_check_value = NULL;
+ field.in_check_mask = NULL;
+ field.in_handler = NULL;
+ field.in_handler_priv = NULL;
+
+ jtag_add_ir_scan(1, &field, end_state, NULL);
+
+ free(field.out_value);
+ }
+
+ return ERROR_OK;
+}
+
+u8 str9xpec_isc_status(int chain_pos)
+{
+ scan_field_t field;
+ u8 status;
+
+ if (str9xpec_set_instr(chain_pos, ISC_NOOP, TAP_PI) != ERROR_OK)
+ return ISC_STATUS_ERROR;
+
+ field.device = chain_pos;
+ field.num_bits = 8;
+ field.out_value = NULL;
+ field.out_mask = NULL;
+ field.in_value = &status;
+ field.in_check_value = NULL;
+ field.in_check_mask = NULL;
+ field.in_handler = NULL;
+ field.in_handler_priv = NULL;
+
+ jtag_add_dr_scan(1, &field, TAP_RTI, NULL);
+ jtag_execute_queue();
+
+ DEBUG("status: 0x%2.2x", status);
+
+ if (status & ISC_STATUS_SECURITY)
+ INFO("Device Security Bit Set");
+
+ return status;
+}
+
+int str9xpec_isc_enable(struct flash_bank_s *bank)
+{
+ u8 status;
+ u32 chain_pos;
+ str9xpec_flash_controller_t *str9xpec_info = bank->driver_priv;
+
+ chain_pos = str9xpec_info->chain_pos;
+
+ if (str9xpec_info->isc_enable)
+ return ERROR_OK;
+
+ /* enter isc mode */
+ if (str9xpec_set_instr(chain_pos, ISC_ENABLE, TAP_RTI) != ERROR_OK)
+ return ERROR_TARGET_INVALID;
+
+ /* check ISC status */
+ status = str9xpec_isc_status(chain_pos);
+ if (status & ISC_STATUS_MODE)
+ {
+ /* we have entered isc mode */
+ str9xpec_info->isc_enable = 1;
+ DEBUG("ISC_MODE Enabled");
+ }
+
+ return ERROR_OK;
+}
+
+int str9xpec_isc_disable(struct flash_bank_s *bank)
+{
+ u8 status;
+ u32 chain_pos;
+ str9xpec_flash_controller_t *str9xpec_info = bank->driver_priv;
+
+ chain_pos = str9xpec_info->chain_pos;
+
+ if (!str9xpec_info->isc_enable)
+ return ERROR_OK;
+
+ if (str9xpec_set_instr(chain_pos, ISC_DISABLE, TAP_RTI) != ERROR_OK)
+ return ERROR_TARGET_INVALID;
+
+ /* delay to handle aborts */
+ jtag_add_sleep(50);
+
+ /* check ISC status */
+ status = str9xpec_isc_status(chain_pos);
+ if (!(status & ISC_STATUS_MODE))
+ {
+ /* we have left isc mode */
+ str9xpec_info->isc_enable = 0;
+ DEBUG("ISC_MODE Disabled");
+ }
+
+ return ERROR_OK;
+}
+
+int str9xpec_read_config(struct flash_bank_s *bank)
+{
+ scan_field_t field;
+ u8 status;
+ u32 chain_pos;
+
+ str9xpec_flash_controller_t *str9xpec_info = bank->driver_priv;
+
+ chain_pos = str9xpec_info->chain_pos;
+
+ DEBUG("ISC_CONFIGURATION");
+
+ /* execute ISC_CONFIGURATION command */
+ str9xpec_set_instr(chain_pos, ISC_CONFIGURATION, TAP_PI);
+
+ field.device = chain_pos;
+ field.num_bits = 64;
+ field.out_value = NULL;
+ field.out_mask = NULL;
+ field.in_value = str9xpec_info->options;
+ field.in_check_value = NULL;
+ field.in_check_mask = NULL;
+ field.in_handler = NULL;
+ field.in_handler_priv = NULL;
+
+ jtag_add_dr_scan(1, &field, TAP_RTI, NULL);
+ jtag_execute_queue();
+
+ status = str9xpec_isc_status(chain_pos);
+
+ return status;
+}
+
+int str9xpec_build_block_list(struct flash_bank_s *bank)
+{
+ str9xpec_flash_controller_t *str9xpec_info = bank->driver_priv;
+
+ int i;
+ int num_sectors = 0, b0_sectors = 0;
+
+ switch (bank->size)
+ {
+ case (256 * 1024):
+ b0_sectors = 4;
+ break;
+ case (512 * 1024):
+ b0_sectors = 8;
+ break;
+ default:
+ ERROR("BUG: unknown bank->size encountered");
+ exit(-1);
+ }
+
+ /* include bank 1 sectors */
+ num_sectors = b0_sectors + 4;
+ bank->size += (32 * 1024);
+
+ bank->num_sectors = num_sectors;
+ bank->sectors = malloc(sizeof(flash_sector_t) * num_sectors);
+ str9xpec_info->sector_bits = malloc(sizeof(u32) * num_sectors);
+
+ num_sectors = 0;
+
+ for (i = 0; i < b0_sectors; i++)
+ {
+ bank->sectors[num_sectors].offset = mem_layout_str9pec[i].sector_start;
+ bank->sectors[num_sectors].size = mem_layout_str9pec[i].sector_size;
+ bank->sectors[num_sectors].is_erased = -1;
+ bank->sectors[num_sectors].is_protected = 1;
+ str9xpec_info->sector_bits[num_sectors++] = mem_layout_str9pec[i].sector_bit;
+ }
+
+ for (i = 8; i < 12; i++)
+ {
+ bank->sectors[num_sectors].offset = mem_layout_str9pec[i].sector_start;
+ bank->sectors[num_sectors].size = mem_layout_str9pec[i].sector_size;
+ bank->sectors[num_sectors].is_erased = -1;
+ bank->sectors[num_sectors].is_protected = 1;
+ str9xpec_info->sector_bits[num_sectors++] = mem_layout_str9pec[i].sector_bit;
+ }
+
+ return ERROR_OK;
+}
+
+/* flash bank str9x <base> <size> 0 0 <target#>
+ */
+int str9xpec_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
+{
+ str9xpec_flash_controller_t *str9xpec_info;
+ armv4_5_common_t *armv4_5 = NULL;
+ arm7_9_common_t *arm7_9 = NULL;
+ arm_jtag_t *jtag_info = NULL;
+
+ if (argc < 6)
+ {
+ WARNING("incomplete flash_bank str9x configuration");
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ str9xpec_info = malloc(sizeof(str9xpec_flash_controller_t));
+ bank->driver_priv = str9xpec_info;
+
+ if (bank->base != 0x00000000)
+ {
+ WARNING("overriding flash base address for STR91x device with 0x00000000");
+ bank->base = 0x00000000;
+ }
+
+ /* find out jtag position of flash controller
+ * it is always after the arm966 core */
+
+ armv4_5 = bank->target->arch_info;
+ arm7_9 = armv4_5->arch_info;
+ jtag_info = &arm7_9->jtag_info;
+
+ str9xpec_info->chain_pos = (jtag_info->chain_pos - 1);
+ str9xpec_info->isc_enable = 0;
+ str9xpec_info->devarm = NULL;
+
+ str9xpec_build_block_list(bank);
+
+ /* clear option byte register */
+ buf_set_u32(str9xpec_info->options, 0, 64, 0);
+
+ return ERROR_OK;
+}
+
+int str9xpec_blank_check(struct flash_bank_s *bank, int first, int last)
+{
+ scan_field_t field;
+ u8 status;
+ u32 chain_pos;
+ int i;
+ u8 *buffer = NULL;
+
+ str9xpec_flash_controller_t *str9xpec_info = bank->driver_priv;
+
+ chain_pos = str9xpec_info->chain_pos;
+
+ if (!str9xpec_info->isc_enable) {
+ str9xpec_isc_enable( bank );
+ }
+
+ if (!str9xpec_info->isc_enable) {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ buffer = calloc(CEIL(64, 8), 1);
+
+ DEBUG("blank check: first_bank: %i, last_bank: %i", first, last);
+
+ for (i = first; i <= last; i++) {
+ buf_set_u32(buffer, str9xpec_info->sector_bits[i], 1, 1);
+ }
+
+ /* execute ISC_BLANK_CHECK command */
+ str9xpec_set_instr(chain_pos, ISC_BLANK_CHECK, TAP_PI);
+
+ field.device = chain_pos;
+ field.num_bits = 64;
+ field.out_value = buffer;
+ field.out_mask = NULL;
+ field.in_value = NULL;
+ field.in_check_value = NULL;
+ field.in_check_mask = NULL;
+ field.in_handler = NULL;
+ field.in_handler_priv = NULL;
+
+ jtag_add_dr_scan(1, &field, TAP_RTI, NULL);
+ jtag_add_sleep(40000);
+
+ /* read blank check result */
+ field.device = chain_pos;
+ field.num_bits = 64;
+ field.out_value = NULL;
+ field.out_mask = NULL;
+ field.in_value = buffer;
+ field.in_check_value = NULL;
+ field.in_check_mask = NULL;
+ field.in_handler = NULL;
+ field.in_handler_priv = NULL;
+
+ jtag_add_dr_scan(1, &field, TAP_PI, NULL);
+ jtag_execute_queue();
+
+ status = str9xpec_isc_status(chain_pos);
+
+ for (i = first; i <= last; i++)
+ {
+ if (buf_get_u32(buffer, str9xpec_info->sector_bits[i], 1))
+ bank->sectors[i].is_erased = 0;
+ else
+ bank->sectors[i].is_erased = 1;
+ }
+
+ free(buffer);
+
+ str9xpec_isc_disable(bank);
+
+ if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
+ return ERROR_FLASH_OPERATION_FAILED;
+ return ERROR_OK;
+}
+
+int str9xpec_protect_check(struct flash_bank_s *bank)
+{
+ u8 status;
+ int i;
+
+ str9xpec_flash_controller_t *str9xpec_info = bank->driver_priv;
+
+ status = str9xpec_read_config(bank);
+
+ for (i = 0; i < bank->num_sectors; i++)
+ {
+ if (buf_get_u32(str9xpec_info->options, str9xpec_info->sector_bits[i], 1))
+ bank->sectors[i].is_protected = 1;
+ else
+ bank->sectors[i].is_protected = 0;
+ }
+
+ if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
+ return ERROR_FLASH_OPERATION_FAILED;
+ return ERROR_OK;
+}
+
+int str9xpec_erase_area(struct flash_bank_s *bank, int first, int last)
+{
+ scan_field_t field;
+ u8 status;
+ u32 chain_pos;
+ int i;
+ u8 *buffer = NULL;
+
+ str9xpec_flash_controller_t *str9xpec_info = bank->driver_priv;
+
+ chain_pos = str9xpec_info->chain_pos;
+
+ if (!str9xpec_info->isc_enable) {
+ str9xpec_isc_enable( bank );
+ }
+
+ if (!str9xpec_info->isc_enable) {
+ return ISC_STATUS_ERROR;
+ }
+
+ buffer = calloc(CEIL(64, 8), 1);
+
+ DEBUG("erase: first_bank: %i, last_bank: %i", first, last);
+
+ /* last bank: 0xFF signals a full erase (unlock complete device) */
+ /* last bank: 0xFE signals a option byte erase */
+ if (last == 0xFF)
+ {
+ for (i = 0; i < 64; i++) {
+ buf_set_u32(buffer, i, 1, 1);
+ }
+ }
+ else if (last == 0xFE)
+ {
+ buf_set_u32(buffer, 49, 1, 1);
+ }
+ else
+ {
+ for (i = first; i <= last; i++) {
+ buf_set_u32(buffer, str9xpec_info->sector_bits[i], 1, 1);
+ }
+ }
+
+ DEBUG("ISC_ERASE");
+
+ /* execute ISC_ERASE command */
+ str9xpec_set_instr(chain_pos, ISC_ERASE, TAP_PI);
+
+ field.device = chain_pos;
+ field.num_bits = 64;
+ field.out_value = buffer;
+ field.out_mask = NULL;
+ field.in_value = NULL;
+ field.in_check_value = NULL;
+ field.in_check_mask = NULL;
+ field.in_handler = NULL;
+ field.in_handler_priv = NULL;
+
+ jtag_add_dr_scan(1, &field, TAP_RTI, NULL);
+ jtag_execute_queue();
+
+ jtag_add_sleep(10);
+
+ /* wait for erase completion */
+ while (!((status = str9xpec_isc_status(chain_pos)) & ISC_STATUS_BUSY)) {
+ usleep(1000);
+ }
+
+ free(buffer);
+
+ str9xpec_isc_disable(bank);
+
+ return status;
+}
+
+int str9xpec_erase(struct flash_bank_s *bank, int first, int last)
+{
+ int status;
+
+ status = str9xpec_erase_area(bank, first, last);
+
+ if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ return ERROR_OK;
+}
+
+int str9xpec_lock_device(struct flash_bank_s *bank)
+{
+ scan_field_t field;
+ u8 status;
+ u32 chain_pos;
+ str9xpec_flash_controller_t *str9xpec_info = NULL;
+
+ str9xpec_info = bank->driver_priv;
+ chain_pos = str9xpec_info->chain_pos;
+
+ if (!str9xpec_info->isc_enable) {
+ str9xpec_isc_enable( bank );
+ }
+
+ if (!str9xpec_info->isc_enable) {
+ return ISC_STATUS_ERROR;
+ }
+
+ /* set security address */
+ str9xpec_set_address(bank, 0x80);
+
+ /* execute ISC_PROGRAM command */
+ str9xpec_set_instr(chain_pos, ISC_PROGRAM_SECURITY, TAP_RTI);
+
+ str9xpec_set_instr(chain_pos, ISC_NOOP, TAP_PI);
+
+ do {
+ field.device = chain_pos;
+ field.num_bits = 8;
+ field.out_value = NULL;
+ field.out_mask = NULL;
+ field.in_value = &status;
+ field.in_check_value = NULL;
+ field.in_check_mask = NULL;
+ field.in_handler = NULL;
+ field.in_handler_priv = NULL;
+
+ jtag_add_dr_scan(1, &field, -1, NULL);
+ jtag_execute_queue();
+
+ } while(!(status & ISC_STATUS_BUSY));
+
+ str9xpec_isc_disable(bank);
+
+ return status;
+}
+
+int str9xpec_unlock_device(struct flash_bank_s *bank)
+{
+ u8 status;
+
+ status = str9xpec_erase_area(bank, 0, 255);
+
+ return status;
+}
+
+int str9xpec_protect(struct flash_bank_s *bank, int set, int first, int last)
+{
+ u8 status;
+ int i;
+
+ str9xpec_flash_controller_t *str9xpec_info = bank->driver_priv;
+
+ status = str9xpec_read_config(bank);
+
+ if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ DEBUG("protect: first_bank: %i, last_bank: %i", first, last);
+
+ /* last bank: 0xFF signals a full device protect */
+ if (last == 0xFF)
+ {
+ if( set )
+ {
+ status = str9xpec_lock_device(bank);
+ }
+ else
+ {
+ /* perform full erase to unlock device */
+ status = str9xpec_unlock_device(bank);
+ }
+ }
+ else
+ {
+ for (i = first; i <= last; i++)
+ {
+ if( set )
+ buf_set_u32(str9xpec_info->options, str9xpec_info->sector_bits[i], 1, 1);
+ else
+ buf_set_u32(str9xpec_info->options, str9xpec_info->sector_bits[i], 1, 0);
+ }
+
+ status = str9xpec_write_options(bank);
+ }
+
+ if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ return ERROR_OK;
+}
+
+int str9xpec_set_address(struct flash_bank_s *bank, u8 sector)
+{
+ u32 chain_pos;
+ scan_field_t field;
+ str9xpec_flash_controller_t *str9xpec_info = bank->driver_priv;
+
+ chain_pos = str9xpec_info->chain_pos;
+
+ /* set flash controller address */
+ str9xpec_set_instr(chain_pos, ISC_ADDRESS_SHIFT, TAP_PI);
+
+ field.device = chain_pos;
+ field.num_bits = 8;
+ field.out_value = &sector;
+ field.out_mask = NULL;
+ field.in_value = NULL;
+ field.in_check_value = NULL;
+ field.in_check_mask = NULL;
+ field.in_handler = NULL;
+ field.in_handler_priv = NULL;
+
+ jtag_add_dr_scan(1, &field, -1, NULL);
+
+ return ERROR_OK;
+}
+
+int str9xpec_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
+{
+ str9xpec_flash_controller_t *str9xpec_info = bank->driver_priv;
+ u32 dwords_remaining = (count / 8);
+ u32 bytes_remaining = (count & 0x00000007);
+ u32 bytes_written = 0;
+ u8 status;
+ u32 check_address = offset;
+ u32 chain_pos;
+ scan_field_t field;
+ u8 *scanbuf;
+ int i;
+ u32 first_sector = 0;
+ u32 last_sector = 0;
+
+ chain_pos = str9xpec_info->chain_pos;
+
+ if (!str9xpec_info->isc_enable) {
+ str9xpec_isc_enable(bank);
+ }
+
+ if (!str9xpec_info->isc_enable) {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ if (offset & 0x7)
+ {
+ WARNING("offset 0x%x breaks required 8-byte alignment", offset);
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ }
+
+ for (i = 0; i < bank->num_sectors; i++)
+ {
+ u32 sec_start = bank->sectors[i].offset;
+ u32 sec_end = sec_start + bank->sectors[i].size;
+
+ /* check if destination falls within the current sector */
+ if ((check_address >= sec_start) && (check_address < sec_end))
+ {
+ /* check if destination ends in the current sector */
+ if (offset + count < sec_end)
+ check_address = offset + count;
+ else
+ check_address = sec_end;
+ }
+
+ if ((offset >= sec_start) && (offset < sec_end)){
+ first_sector = i;
+ }
+
+ if ((offset + count >= sec_start) && (offset + count < sec_end)){
+ last_sector = i;
+ }
+ }
+
+ if (check_address != offset + count)
+ return ERROR_FLASH_DST_OUT_OF_BANK;
+
+ DEBUG("first_sector: %i, last_sector: %i", first_sector, last_sector);
+
+ scanbuf = calloc(CEIL(64, 8), 1);
+
+ DEBUG("ISC_PROGRAM");
+
+ for (i = first_sector; i <= last_sector; i++)
+ {
+ str9xpec_set_address(bank, str9xpec_info->sector_bits[i]);
+
+ dwords_remaining = dwords_remaining < (bank->sectors[i].size/8) ? dwords_remaining : (bank->sectors[i].size/8);
+
+ while (dwords_remaining > 0)
+ {
+ str9xpec_set_instr(chain_pos, ISC_PROGRAM, TAP_PI);
+
+ field.device = chain_pos;
+ field.num_bits = 64;
+ field.out_value = (buffer + bytes_written);
+ field.out_mask = NULL;
+ field.in_value = NULL;
+ field.in_check_value = NULL;
+ field.in_check_mask = NULL;
+ field.in_handler = NULL;
+ field.in_handler_priv = NULL;
+
+ jtag_add_dr_scan(1, &field, TAP_RTI, NULL);
+
+ /* small delay before polling */
+ jtag_add_sleep(50);
+
+ str9xpec_set_instr(chain_pos, ISC_NOOP, TAP_PI);
+
+ do {
+ field.device = chain_pos;
+ field.num_bits = 8;
+ field.out_value = NULL;
+ field.out_mask = NULL;
+ field.in_value = scanbuf;
+ field.in_check_value = NULL;
+ field.in_check_mask = NULL;
+ field.in_handler = NULL;
+ field.in_handler_priv = NULL;
+
+ jtag_add_dr_scan(1, &field, -1, NULL);
+ jtag_execute_queue();
+
+ status = buf_get_u32(scanbuf, 0, 8);
+
+ } while(!(status & ISC_STATUS_BUSY));
+
+ if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ //if ((status & ISC_STATUS_INT_ERROR) != STR9XPEC_ISC_INTFAIL)
+ // return ERROR_FLASH_OPERATION_FAILED;
+
+ dwords_remaining--;
+ bytes_written += 8;
+ }
+ }
+
+ if (bytes_remaining)
+ {
+ u8 last_dword[8] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+ int i = 0;
+
+ while(bytes_remaining > 0)
+ {
+ last_dword[i++] = *(buffer + bytes_written);
+ bytes_remaining--;
+ bytes_written++;
+ }
+
+ str9xpec_set_instr(chain_pos, ISC_PROGRAM, TAP_PI);
+
+ field.device = chain_pos;
+ field.num_bits = 64;
+ field.out_value = last_dword;
+ field.out_mask = NULL;
+ field.in_value = NULL;
+ field.in_check_value = NULL;
+ field.in_check_mask = NULL;
+ field.in_handler = NULL;
+ field.in_handler_priv = NULL;
+
+ jtag_add_dr_scan(1, &field, TAP_RTI, NULL);
+
+ /* small delay before polling */
+ jtag_add_sleep(50);
+
+ str9xpec_set_instr(chain_pos, ISC_NOOP, TAP_PI);
+
+ do {
+ field.device = chain_pos;
+ field.num_bits = 8;
+ field.out_value = NULL;
+ field.out_mask = NULL;
+ field.in_value = scanbuf;
+ field.in_check_value = NULL;
+ field.in_check_mask = NULL;
+ field.in_handler = NULL;
+ field.in_handler_priv = NULL;
+
+ jtag_add_dr_scan(1, &field, -1, NULL);
+ jtag_execute_queue();
+
+ status = buf_get_u32(scanbuf, 0, 8);
+
+ } while(!(status & ISC_STATUS_BUSY));
+
+ if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ //if ((status & ISC_STATUS_INT_ERROR) != STR9XPEC_ISC_INTFAIL)
+ // return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ free(scanbuf);
+
+ str9xpec_isc_disable(bank);
+
+ return ERROR_OK;
+}
+
+int str9xpec_probe(struct flash_bank_s *bank)
+{
+ return ERROR_OK;
+}
+
+int str9xpec_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *bank;
+ scan_field_t field;
+ u8 *buffer = NULL;
+ u32 chain_pos;
+ u32 idcode;
+ str9xpec_flash_controller_t *str9xpec_info = NULL;
+
+ if (argc < 1)
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!bank)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ str9xpec_info = bank->driver_priv;
+ chain_pos = str9xpec_info->chain_pos;
+
+ buffer = calloc(CEIL(32, 8), 1);
+
+ str9xpec_set_instr(chain_pos, ISC_IDCODE, TAP_PI);
+
+ field.device = chain_pos;
+ field.num_bits = 32;
+ field.out_value = NULL;
+ field.out_mask = NULL;
+ field.in_value = buffer;
+ field.in_check_value = NULL;
+ field.in_check_mask = NULL;
+ field.in_handler = NULL;
+ field.in_handler_priv = NULL;
+
+ jtag_add_dr_scan(1, &field, TAP_RTI, NULL);
+ jtag_execute_queue();
+
+ idcode = buf_get_u32(buffer, 0, 32);
+
+ command_print(cmd_ctx, "str9xpec part id: 0x%8.8x", idcode);
+
+ free(buffer);
+
+ return ERROR_OK;
+}
+
+int str9xpec_erase_check(struct flash_bank_s *bank)
+{
+ return str9xpec_blank_check(bank, 0, bank->num_sectors - 1);
+}
+
+int str9xpec_info(struct flash_bank_s *bank, char *buf, int buf_size)
+{
+ snprintf(buf, buf_size, "str9xpec flash driver info" );
+ return ERROR_OK;
+}
+
+int str9xpec_handle_flash_options_read_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *bank;
+ u8 status;
+ str9xpec_flash_controller_t *str9xpec_info = NULL;
+
+ if (argc < 1)
+ {
+ command_print(cmd_ctx, "str9xpec options_read <bank>");
+ return ERROR_OK;
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!bank)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ str9xpec_info = bank->driver_priv;
+
+ status = str9xpec_read_config(bank);
+
+ if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ /* boot bank */
+ if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_CSMAPBIT, 1))
+ command_print(cmd_ctx, "CS Map: bank1");
+ else
+ command_print(cmd_ctx, "CS Map: bank0");
+
+ /* OTP lock */
+ if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_OTPBIT, 1))
+ command_print(cmd_ctx, "OTP Lock: OTP Locked");
+ else
+ command_print(cmd_ctx, "OTP Lock: OTP Unlocked");
+
+ /* LVD Threshold */
+ if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_LVDTHRESBIT, 1))
+ command_print(cmd_ctx, "LVD Threshold: 2.7v");
+ else
+ command_print(cmd_ctx, "LVD Threshold: 2.4v");
+
+ /* LVD reset warning */
+ if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_LVDWARNBIT, 1))
+ command_print(cmd_ctx, "LVD Reset Warning: VDD or VDDQ Inputs");
+ else
+ command_print(cmd_ctx, "LVD Reset Warning: VDD Input Only");
+
+ /* LVD reset select */
+ if (buf_get_u32(str9xpec_info->options, STR9XPEC_OPT_LVDSELBIT, 1))
+ command_print(cmd_ctx, "LVD Reset Selection: VDD or VDDQ Inputs");
+ else
+ command_print(cmd_ctx, "LVD Reset Selection: VDD Input Only");
+
+ return ERROR_OK;
+}
+
+int str9xpec_write_options(struct flash_bank_s *bank)
+{
+ scan_field_t field;
+ u8 status;
+ u32 chain_pos;
+ str9xpec_flash_controller_t *str9xpec_info = NULL;
+
+ str9xpec_info = bank->driver_priv;
+ chain_pos = str9xpec_info->chain_pos;
+
+ /* erase config options first */
+ status = str9xpec_erase_area( bank, 0xFE, 0xFE );
+
+ if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
+ return status;
+
+ if (!str9xpec_info->isc_enable) {
+ str9xpec_isc_enable( bank );
+ }
+
+ if (!str9xpec_info->isc_enable) {
+ return ISC_STATUS_ERROR;
+ }
+
+ /* according to data 64th bit has to be set */
+ buf_set_u32(str9xpec_info->options, 63, 1, 1);
+
+ /* set option byte address */
+ str9xpec_set_address(bank, 0x50);
+
+ /* execute ISC_PROGRAM command */
+ str9xpec_set_instr(chain_pos, ISC_PROGRAM, TAP_PI);
+
+ field.device = chain_pos;
+ field.num_bits = 64;
+ field.out_value = str9xpec_info->options;
+ field.out_mask = NULL;
+ field.in_value = NULL;
+ field.in_check_value = NULL;
+ field.in_check_mask = NULL;
+ field.in_handler = NULL;
+ field.in_handler_priv = NULL;
+
+ jtag_add_dr_scan(1, &field, TAP_RTI, NULL);
+
+ /* small delay before polling */
+ jtag_add_sleep(50);
+
+ str9xpec_set_instr(chain_pos, ISC_NOOP, TAP_PI);
+
+ do {
+ field.device = chain_pos;
+ field.num_bits = 8;
+ field.out_value = NULL;
+ field.out_mask = NULL;
+ field.in_value = &status;
+ field.in_check_value = NULL;
+ field.in_check_mask = NULL;
+ field.in_handler = NULL;
+ field.in_handler_priv = NULL;
+
+ jtag_add_dr_scan(1, &field, -1, NULL);
+ jtag_execute_queue();
+
+ } while(!(status & ISC_STATUS_BUSY));
+
+ str9xpec_isc_disable(bank);
+
+ return status;
+}
+
+int str9xpec_handle_flash_options_write_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *bank;
+ u8 status;
+
+ if (argc < 1)
+ {
+ command_print(cmd_ctx, "str9xpec options_write <bank>");
+ return ERROR_OK;
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!bank)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ status = str9xpec_write_options(bank);
+
+ if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ return ERROR_OK;
+}
+
+int str9xpec_handle_flash_options_cmap_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *bank;
+ str9xpec_flash_controller_t *str9xpec_info = NULL;
+
+ if (argc < 2)
+ {
+ command_print(cmd_ctx, "str9xpec options_cmap <bank> <bank0|bank1>");
+ return ERROR_OK;
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!bank)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ str9xpec_info = bank->driver_priv;
+
+ if (strcmp(args[1], "bank1") == 0)
+ {
+ buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_CSMAPBIT, 1, 1);
+ }
+ else
+ {
+ buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_CSMAPBIT, 1, 0);
+ }
+
+ return ERROR_OK;
+}
+
+int str9xpec_handle_flash_options_lvdthd_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *bank;
+ str9xpec_flash_controller_t *str9xpec_info = NULL;
+
+ if (argc < 2)
+ {
+ command_print(cmd_ctx, "str9xpec options_lvdthd <bank> <2.4v|2.7v>");
+ return ERROR_OK;
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!bank)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ str9xpec_info = bank->driver_priv;
+
+ if (strcmp(args[1], "2.7v") == 0)
+ {
+ buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDTHRESBIT, 1, 1);
+ }
+ else
+ {
+ buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDTHRESBIT, 1, 0);
+ }
+
+ return ERROR_OK;
+}
+
+int str9xpec_handle_flash_options_lvdsel_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *bank;
+ str9xpec_flash_controller_t *str9xpec_info = NULL;
+
+ if (argc < 2)
+ {
+ command_print(cmd_ctx, "str9xpec options_lvdsel <bank> <vdd|vdd_vddq>");
+ return ERROR_OK;
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!bank)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ str9xpec_info = bank->driver_priv;
+
+ if (strcmp(args[1], "vdd_vddq") == 0)
+ {
+ buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDSELBIT, 1, 1);
+ }
+ else
+ {
+ buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDSELBIT, 1, 0);
+ }
+
+ return ERROR_OK;
+}
+
+int str9xpec_handle_flash_options_lvdwarn_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *bank;
+ str9xpec_flash_controller_t *str9xpec_info = NULL;
+
+ if (argc < 2)
+ {
+ command_print(cmd_ctx, "str9xpec options_lvdwarn <bank> <vdd|vdd_vddq>");
+ return ERROR_OK;
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!bank)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ str9xpec_info = bank->driver_priv;
+
+ if (strcmp(args[1], "vdd_vddq") == 0)
+ {
+ buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDWARNBIT, 1, 1);
+ }
+ else
+ {
+ buf_set_u32(str9xpec_info->options, STR9XPEC_OPT_LVDWARNBIT, 1, 0);
+ }
+
+ return ERROR_OK;
+}
+
+int str9xpec_handle_flash_lock_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ u8 status;
+ flash_bank_t *bank;
+
+ if (argc < 1)
+ {
+ command_print(cmd_ctx, "str9xpec lock <bank>");
+ return ERROR_OK;
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!bank)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ status = str9xpec_lock_device(bank);
+
+ if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ return ERROR_OK;
+}
+
+int str9xpec_handle_flash_unlock_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ u8 status;
+ flash_bank_t *bank;
+
+ if (argc < 1)
+ {
+ command_print(cmd_ctx, "str9xpec unlock <bank>");
+ return ERROR_OK;
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!bank)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ status = str9xpec_unlock_device(bank);
+
+ if ((status & ISC_STATUS_ERROR) != STR9XPEC_ISC_SUCCESS)
+ return ERROR_FLASH_OPERATION_FAILED;
+
+ return ERROR_OK;
+}
+
+int str9xpec_handle_flash_enable_turbo_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *bank;
+ u32 chain_pos;
+ jtag_device_t* dev0;
+ jtag_device_t* dev2;
+ str9xpec_flash_controller_t *str9xpec_info = NULL;
+
+ if (argc < 1)
+ {
+ command_print(cmd_ctx, "str9xpec enable_turbo <bank>");
+ return ERROR_OK;
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!bank)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ str9xpec_info = bank->driver_priv;
+
+ chain_pos = str9xpec_info->chain_pos;
+
+ /* remove arm core from chain - enter turbo mode */
+
+ str9xpec_set_instr(chain_pos+2, 0xD, TAP_RTI);
+ jtag_execute_queue();
+
+ /* modify scan chain - str9 core has been removed */
+ dev0 = jtag_get_device(chain_pos);
+ str9xpec_info->devarm = jtag_get_device(chain_pos+1);
+ dev2 = jtag_get_device(chain_pos+2);
+ dev0->next = dev2;
+ jtag_num_devices--;
+
+ return ERROR_OK;
+}
+
+int str9xpec_handle_flash_disable_turbo_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *bank;
+ u32 chain_pos;
+ jtag_device_t* dev0;
+ str9xpec_flash_controller_t *str9xpec_info = NULL;
+
+ if (argc < 1)
+ {
+ command_print(cmd_ctx, "str9xpec disable_turbo <bank>");
+ return ERROR_OK;
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!bank)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
+ return ERROR_OK;
+ }
+
+ str9xpec_info = bank->driver_priv;
+
+ chain_pos = str9xpec_info->chain_pos;
+
+ dev0 = jtag_get_device(chain_pos);
+
+ /* exit turbo mode via TLR */
+ str9xpec_set_instr(chain_pos, ISC_NOOP, TAP_TLR);
+ jtag_execute_queue();
+
+ /* restore previous scan chain */
+ if( str9xpec_info->devarm ) {
+ dev0->next = str9xpec_info->devarm;
+ jtag_num_devices++;
+ str9xpec_info->devarm = NULL;
+ }
+
+ return ERROR_OK;
+}
diff --git a/src/helper/interpreter.c b/src/helper/interpreter.c
index cfda856a..aa331fda 100644
--- a/src/helper/interpreter.c
+++ b/src/helper/interpreter.c
@@ -1,243 +1,243 @@
-/***************************************************************************
- * Copyright (C) 2005 by Dominic Rath *
- * Dominic.Rath@gmx.de *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- ***************************************************************************/
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "interpreter.h"
-#include "configuration.h"
-
-#include "binarybuffer.h"
-#include <stdlib.h>
-#include <string.h>
-
-var_t *variables = NULL;
-
-int handle_var_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_field_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_script_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-
-int interpreter_register_commands(struct command_context_s *cmd_ctx)
-{
- register_command(cmd_ctx, NULL, "var", handle_var_command,
- COMMAND_ANY, "allocate, display or delete variable <name> [num_fields|'del'] [size1] ...");
- register_command(cmd_ctx, NULL, "field", handle_field_command,
- COMMAND_ANY, "display/modify variable field <var> <field> [value|'flip']");
- register_command(cmd_ctx, NULL, "script", handle_script_command,
- COMMAND_ANY, "execute commands from <file>");
-
- return ERROR_OK;
-}
-
-var_t* get_var_by_num(int num)
-{
- int count = 0;
- var_t *var = variables;
-
- if (var)
- {
- if (num == count)
- return var;
- while (var->next)
- {
- var = var->next;
- count++;
- if (num == count)
- return var;
- }
- }
- return NULL;
-}
-
-var_t* get_var_by_name(char *name)
-{
- var_t *var = variables;
-
- if (var)
- {
- if (strcmp(var->name, name) == 0)
- return var;
- while (var->next)
- {
- var = var->next;
- if (strcmp(var->name, name) == 0)
- return var;
- }
- }
- return NULL;
-}
-
-var_t* get_var_by_namenum(char *namenum)
-{
- if ((namenum[0] >= '0') && (namenum[0] <= '9'))
- return get_var_by_num(strtol(namenum, NULL, 0));
- else
- return get_var_by_name(namenum);
-
-}
-
-int field_le_to_host(u8 *buffer, void *priv, struct scan_field_s *dummy)
-{
- var_field_t *field = priv;
- field->value = buf_get_u32(buffer, 0, field->num_bits);
-
- return ERROR_OK;
-}
-
-int handle_var_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- var_t **last_var_p = &variables;
- int i;
-
- if (argc >= 2)
- {
- while (*last_var_p)
- {
- if (strcmp((*last_var_p)->name, args[0]) == 0)
- {
- if (strcmp(args[1], "del") == 0)
- {
- var_t *next = (*last_var_p)->next;
- free ((*last_var_p)->fields);
- free (*last_var_p);
- *last_var_p = next;
- command_print(cmd_ctx, "variable %s deleted", args[0]);
- }
- else
- command_print(cmd_ctx, "variable of that name already exists");
- return ERROR_OK;
- }
- last_var_p = &((*last_var_p)->next);
- }
-
- if ((args[0][0] >= '0') && (args[0][0] <= '9'))
- {
- command_print(cmd_ctx, "invalid name specified (first character may not be a number)");
- return ERROR_OK;
- }
-
- *last_var_p = malloc(sizeof(var_t));
- (*last_var_p)->name = strdup(args[0]);
- (*last_var_p)->num_fields = argc - 1;
- (*last_var_p)->next = NULL;
-
- (*last_var_p)->fields = malloc(sizeof(var_field_t) * (*last_var_p)->num_fields);
- for (i = 0; i < (*last_var_p)->num_fields; i++)
- {
- (*last_var_p)->fields[i].num_bits = strtol(args[1+i], NULL, 0);
- (*last_var_p)->fields[i].value = 0x0;
- }
- return ERROR_OK;
- }
-
- if (argc == 1)
- {
- var_t *var = get_var_by_namenum(args[0]);
- if (var)
- {
- int i;
- command_print(cmd_ctx, "%s (%i fields):", var->name, var->num_fields);
- for (i = 0; i < (var->num_fields); i++)
- {
- command_print(cmd_ctx, "0x%x (/%i)", var->fields[i].value, var->fields[i].num_bits);
- }
- }
- else
- {
- command_print(cmd_ctx, "variable %s doesn't exist", args[0]);
- }
- }
-
- if (argc == 0)
- {
- var_t *var = variables;
- int count = 0;
- while (var)
- {
- command_print(cmd_ctx, "%i: %s (%i fields)", count, var->name, var->num_fields);
- var = var->next;
- count++;
- }
- }
-
- return ERROR_OK;
-}
-
-int handle_field_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
-
- if (argc < 2)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- if (argc >= 2)
- {
- var_t *var = get_var_by_namenum(args[0]);
- int field_num = strtol(args[1], NULL, 0);
- if (!var)
- {
- command_print(cmd_ctx, "variable %s doesn't exist", args[0]);
- return ERROR_OK;
- }
- if (field_num >= var->num_fields)
- command_print(cmd_ctx, "variable field %i is out of bounds (max. %i)", field_num, var->num_fields - 1);
- if ((var) && (field_num < var->num_fields))
- {
- if (argc > 2)
- {
- if (strcmp(args[2], "flip") == 0)
- var->fields[field_num].value = flip_u32(var->fields[field_num].value, var->fields[field_num].num_bits);
- else
- var->fields[field_num].value = strtoul(args[2], NULL, 0);
- }
-
- command_print(cmd_ctx, "%s(%i): 0x%x (/%i)", var->name, field_num, var->fields[field_num].value, var->fields[field_num].num_bits);
- }
- }
-
- return ERROR_OK;
-}
-
-int handle_script_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- FILE *script_file;
- int echo;
-
- if (argc != 1)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- script_file = open_file_from_path(cmd_ctx, args[0], "r");
-
- if (!script_file)
- {
- command_print(cmd_ctx, "couldn't open script file %s", args[0]);
- return ERROR_OK;
- }
-
- echo = cmd_ctx->echo;
- cmd_ctx->echo = 1;
-
- command_run_file(cmd_ctx, script_file, cmd_ctx->mode);
-
- cmd_ctx->echo = echo;
-
- fclose(script_file);
-
- return ERROR_OK;
-}
+/***************************************************************************
+ * Copyright (C) 2005 by Dominic Rath *
+ * Dominic.Rath@gmx.de *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "interpreter.h"
+#include "configuration.h"
+
+#include "binarybuffer.h"
+#include <stdlib.h>
+#include <string.h>
+
+var_t *variables = NULL;
+
+int handle_var_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int handle_field_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int handle_script_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+
+int interpreter_register_commands(struct command_context_s *cmd_ctx)
+{
+ register_command(cmd_ctx, NULL, "var", handle_var_command,
+ COMMAND_ANY, "allocate, display or delete variable <name> [num_fields|'del'] [size1] ...");
+ register_command(cmd_ctx, NULL, "field", handle_field_command,
+ COMMAND_ANY, "display/modify variable field <var> <field> [value|'flip']");
+ register_command(cmd_ctx, NULL, "script", handle_script_command,
+ COMMAND_ANY, "execute commands from <file>");
+
+ return ERROR_OK;
+}
+
+var_t* get_var_by_num(int num)
+{
+ int count = 0;
+ var_t *var = variables;
+
+ if (var)
+ {
+ if (num == count)
+ return var;
+ while (var->next)
+ {
+ var = var->next;
+ count++;
+ if (num == count)
+ return var;
+ }
+ }
+ return NULL;
+}
+
+var_t* get_var_by_name(char *name)
+{
+ var_t *var = variables;
+
+ if (var)
+ {
+ if (strcmp(var->name, name) == 0)
+ return var;
+ while (var->next)
+ {
+ var = var->next;
+ if (strcmp(var->name, name) == 0)
+ return var;
+ }
+ }
+ return NULL;
+}
+
+var_t* get_var_by_namenum(char *namenum)
+{
+ if ((namenum[0] >= '0') && (namenum[0] <= '9'))
+ return get_var_by_num(strtol(namenum, NULL, 0));
+ else
+ return get_var_by_name(namenum);
+
+}
+
+int field_le_to_host(u8 *buffer, void *priv, struct scan_field_s *dummy)
+{
+ var_field_t *field = priv;
+ field->value = buf_get_u32(buffer, 0, field->num_bits);
+
+ return ERROR_OK;
+}
+
+int handle_var_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ var_t **last_var_p = &variables;
+ int i;
+
+ if (argc >= 2)
+ {
+ while (*last_var_p)
+ {
+ if (strcmp((*last_var_p)->name, args[0]) == 0)
+ {
+ if (strcmp(args[1], "del") == 0)
+ {
+ var_t *next = (*last_var_p)->next;
+ free ((*last_var_p)->fields);
+ free (*last_var_p);
+ *last_var_p = next;
+ command_print(cmd_ctx, "variable %s deleted", args[0]);
+ }
+ else
+ command_print(cmd_ctx, "variable of that name already exists");
+ return ERROR_OK;
+ }
+ last_var_p = &((*last_var_p)->next);
+ }
+
+ if ((args[0][0] >= '0') && (args[0][0] <= '9'))
+ {
+ command_print(cmd_ctx, "invalid name specified (first character may not be a number)");
+ return ERROR_OK;
+ }
+
+ *last_var_p = malloc(sizeof(var_t));
+ (*last_var_p)->name = strdup(args[0]);
+ (*last_var_p)->num_fields = argc - 1;
+ (*last_var_p)->next = NULL;
+
+ (*last_var_p)->fields = malloc(sizeof(var_field_t) * (*last_var_p)->num_fields);
+ for (i = 0; i < (*last_var_p)->num_fields; i++)
+ {
+ (*last_var_p)->fields[i].num_bits = strtol(args[1+i], NULL, 0);
+ (*last_var_p)->fields[i].value = 0x0;
+ }
+ return ERROR_OK;
+ }
+
+ if (argc == 1)
+ {
+ var_t *var = get_var_by_namenum(args[0]);
+ if (var)
+ {
+ int i;
+ command_print(cmd_ctx, "%s (%i fields):", var->name, var->num_fields);
+ for (i = 0; i < (var->num_fields); i++)
+ {
+ command_print(cmd_ctx, "0x%x (/%i)", var->fields[i].value, var->fields[i].num_bits);
+ }
+ }
+ else
+ {
+ command_print(cmd_ctx, "variable %s doesn't exist", args[0]);
+ }
+ }
+
+ if (argc == 0)
+ {
+ var_t *var = variables;
+ int count = 0;
+ while (var)
+ {
+ command_print(cmd_ctx, "%i: %s (%i fields)", count, var->name, var->num_fields);
+ var = var->next;
+ count++;
+ }
+ }
+
+ return ERROR_OK;
+}
+
+int handle_field_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+
+ if (argc < 2)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ if (argc >= 2)
+ {
+ var_t *var = get_var_by_namenum(args[0]);
+ int field_num = strtol(args[1], NULL, 0);
+ if (!var)
+ {
+ command_print(cmd_ctx, "variable %s doesn't exist", args[0]);
+ return ERROR_OK;
+ }
+ if (field_num >= var->num_fields)
+ command_print(cmd_ctx, "variable field %i is out of bounds (max. %i)", field_num, var->num_fields - 1);
+ if ((var) && (field_num < var->num_fields))
+ {
+ if (argc > 2)
+ {
+ if (strcmp(args[2], "flip") == 0)
+ var->fields[field_num].value = flip_u32(var->fields[field_num].value, var->fields[field_num].num_bits);
+ else
+ var->fields[field_num].value = strtoul(args[2], NULL, 0);
+ }
+
+ command_print(cmd_ctx, "%s(%i): 0x%x (/%i)", var->name, field_num, var->fields[field_num].value, var->fields[field_num].num_bits);
+ }
+ }
+
+ return ERROR_OK;
+}
+
+int handle_script_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ FILE *script_file;
+ int echo;
+
+ if (argc != 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ script_file = open_file_from_path(cmd_ctx, args[0], "r");
+
+ if (!script_file)
+ {
+ command_print(cmd_ctx, "couldn't open script file %s", args[0]);
+ return ERROR_OK;
+ }
+
+ echo = cmd_ctx->echo;
+ cmd_ctx->echo = 1;
+
+ command_run_file(cmd_ctx, script_file, cmd_ctx->mode);
+
+ cmd_ctx->echo = echo;
+
+ fclose(script_file);
+
+ return ERROR_OK;
+}
diff --git a/src/server/gdb_server.c b/src/server/gdb_server.c
index b4a79820..49630579 100644
--- a/src/server/gdb_server.c
+++ b/src/server/gdb_server.c
@@ -1,2107 +1,2107 @@
-/***************************************************************************
- * Copyright (C) 2005 by Dominic Rath *
- * Dominic.Rath@gmx.de *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- ***************************************************************************/
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "replacements.h"
-
-#include "gdb_server.h"
-
-#include "server.h"
-#include "log.h"
-#include "binarybuffer.h"
-#include "jtag.h"
-#include "breakpoints.h"
-#include "flash.h"
-#include "target_request.h"
-#include "configuration.h"
-
-#include <string.h>
-#include <errno.h>
-#include <unistd.h>
-#include <stdlib.h>
-
-#if 0
-#define _DEBUG_GDB_IO_
-#endif
-
-static unsigned short gdb_port;
-static const char *DIGITS = "0123456789abcdef";
-
-static void gdb_log_callback(void *priv, const char *file, int line,
- const char *function, const char *format, va_list args);
-
-enum gdb_detach_mode
-{
- GDB_DETACH_RESUME,
- GDB_DETACH_RESET,
- GDB_DETACH_HALT,
- GDB_DETACH_NOTHING
-};
-
-/* target behaviour on gdb detach */
-enum gdb_detach_mode detach_mode = GDB_DETACH_RESUME;
-
-/* set if we are sending a memory map to gdb
- * via qXfer:memory-map:read packet */
-int gdb_use_memory_map = 0;
-int gdb_flash_program = 0;
-
-/* if set, data aborts cause an error to be reported in memory read packets
- * see the code in gdb_read_memory_packet() for further explanations */
-int gdb_report_data_abort = 0;
-
-int gdb_last_signal(target_t *target)
-{
- switch (target->debug_reason)
- {
- case DBG_REASON_DBGRQ:
- return 0x2; /* SIGINT */
- case DBG_REASON_BREAKPOINT:
- case DBG_REASON_WATCHPOINT:
- case DBG_REASON_WPTANDBKPT:
- return 0x05; /* SIGTRAP */
- case DBG_REASON_SINGLESTEP:
- return 0x05; /* SIGTRAP */
- case DBG_REASON_NOTHALTED:
- return 0x0; /* no signal... shouldn't happen */
- default:
- ERROR("BUG: undefined debug reason");
- exit(-1);
- }
-}
-
-int gdb_get_char(connection_t *connection, int* next_char)
-{
- gdb_connection_t *gdb_con = connection->priv;
-
-#ifdef _DEBUG_GDB_IO_
- char *debug_buffer;
-#endif
-
- if (gdb_con->buf_cnt-- > 0)
- {
- *next_char = *(gdb_con->buf_p++);
- if (gdb_con->buf_cnt > 0)
- connection->input_pending = 1;
- else
- connection->input_pending = 0;
-
-#ifdef _DEBUG_GDB_IO_
- DEBUG("returned char '%c' (0x%2.2x)", *next_char, *next_char);
-#endif
-
- return ERROR_OK;
- }
-
- for (;;)
- {
-#ifndef _WIN32
- /* a non-blocking socket will block if there is 0 bytes available on the socket,
- * but return with as many bytes as are available immediately
- */
- struct timeval tv;
- fd_set read_fds;
-
- FD_ZERO(&read_fds);
- FD_SET(connection->fd, &read_fds);
-
- tv.tv_sec = 1;
- tv.tv_usec = 0;
- if (select(connection->fd + 1, &read_fds, NULL, NULL, &tv) == 0)
- {
- /* This can typically be because a "monitor" command took too long
- * before printing any progress messages
- */
- return ERROR_GDB_TIMEOUT;
- }
-#endif
- gdb_con->buf_cnt = read_socket(connection->fd, gdb_con->buffer, GDB_BUFFER_SIZE);
- if (gdb_con->buf_cnt > 0)
- {
- break;
- }
- if (gdb_con->buf_cnt == 0)
- {
- gdb_con->closed = 1;
- return ERROR_SERVER_REMOTE_CLOSED;
- }
-
-#ifdef _WIN32
- errno = WSAGetLastError();
-
- switch(errno)
- {
- case WSAEWOULDBLOCK:
- usleep(1000);
- break;
- case WSAECONNABORTED:
- return ERROR_SERVER_REMOTE_CLOSED;
- case WSAECONNRESET:
- return ERROR_SERVER_REMOTE_CLOSED;
- default:
- ERROR("read: %d", errno);
- exit(-1);
- }
-#else
- switch(errno)
- {
- case EAGAIN:
- usleep(1000);
- break;
- case ECONNABORTED:
- return ERROR_SERVER_REMOTE_CLOSED;
- case ECONNRESET:
- return ERROR_SERVER_REMOTE_CLOSED;
- default:
- ERROR("read: %s", strerror(errno));
- return ERROR_SERVER_REMOTE_CLOSED;
- }
-#endif
- }
-
-#ifdef _DEBUG_GDB_IO_
- debug_buffer = malloc(gdb_con->buf_cnt + 1);
- memcpy(debug_buffer, gdb_con->buffer, gdb_con->buf_cnt);
- debug_buffer[gdb_con->buf_cnt] = 0;
- DEBUG("received '%s'", debug_buffer);
- free(debug_buffer);
-#endif
-
- gdb_con->buf_p = gdb_con->buffer;
- gdb_con->buf_cnt--;
- *next_char = *(gdb_con->buf_p++);
- if (gdb_con->buf_cnt > 0)
- connection->input_pending = 1;
- else
- connection->input_pending = 0;
-#ifdef _DEBUG_GDB_IO_
- DEBUG("returned char '%c' (0x%2.2x)", *next_char, *next_char);
-#endif
-
- return ERROR_OK;
-}
-
-int gdb_putback_char(connection_t *connection, int last_char)
-{
- gdb_connection_t *gdb_con = connection->priv;
-
- if (gdb_con->buf_p > gdb_con->buffer)
- {
- *(--gdb_con->buf_p) = last_char;
- gdb_con->buf_cnt++;
- }
- else
- {
- ERROR("BUG: couldn't put character back");
- }
-
- return ERROR_OK;
-}
-
-/* The only way we can detect that the socket is closed is the first time
- * we write to it, we will fail. Subsequent write operations will
- * succeed. Shudder! */
-int gdb_write(connection_t *connection, void *data, int len)
-{
- gdb_connection_t *gdb_con = connection->priv;
- if (gdb_con->closed)
- return ERROR_SERVER_REMOTE_CLOSED;
-
- if (write_socket(connection->fd, data, len) == len)
- {
- return ERROR_OK;
- }
- gdb_con->closed = 1;
- return ERROR_SERVER_REMOTE_CLOSED;
-}
-
-int gdb_put_packet_inner(connection_t *connection, char *buffer, int len)
-{
- int i;
- unsigned char my_checksum = 0;
-#ifdef _DEBUG_GDB_IO_
- char *debug_buffer;
-#endif
- int reply;
- int retval;
- gdb_connection_t *gdb_con = connection->priv;
-
- for (i = 0; i < len; i++)
- my_checksum += buffer[i];
-
- while (1)
- {
-#ifdef _DEBUG_GDB_IO_
- debug_buffer = malloc(len + 1);
- memcpy(debug_buffer, buffer, len);
- debug_buffer[len] = 0;
- DEBUG("sending packet '$%s#%2.2x'", debug_buffer, my_checksum);
- free(debug_buffer);
-#endif
-#if 0
- char checksum[3];
- gdb_write(connection, "$", 1);
- if (len > 0)
- gdb_write(connection, buffer, len);
- gdb_write(connection, "#", 1);
-
- snprintf(checksum, 3, "%2.2x", my_checksum);
-
- gdb_write(connection, checksum, 2);
-#else
- void *allocated = NULL;
- char stackAlloc[1024];
- char *t = stackAlloc;
- int totalLen = 1 + len + 1 + 2;
- if (totalLen > sizeof(stackAlloc))
- {
- allocated = malloc(totalLen);
- t = allocated;
- if (allocated == NULL)
- {
- ERROR("Ran out of memory trying to reply packet %d\n", totalLen);
- exit(-1);
- }
- }
- t[0] = '$';
- memcpy(t + 1, buffer, len);
- t[1 + len] = '#';
- t[1 + len + 1] = DIGITS[(my_checksum >> 4) & 0xf];
- t[1 + len + 2] = DIGITS[my_checksum & 0xf];
-
- gdb_write(connection, t, totalLen);
-
- if (allocated)
- {
- free(allocated);
- }
-#endif
- if ((retval = gdb_get_char(connection, &reply)) != ERROR_OK)
- return retval;
-
- if (reply == '+')
- break;
- else if (reply == '-')
- {
- /* Stop sending output packets for now */
- log_setCallback(NULL, NULL);
- WARNING("negative reply, retrying");
- }
- else if (reply == 0x3)
- {
- gdb_con->ctrl_c = 1;
- if ((retval = gdb_get_char(connection, &reply)) != ERROR_OK)
- return retval;
- if (reply == '+')
- break;
- else if (reply == '-')
- {
- /* Stop sending output packets for now */
- log_setCallback(NULL, NULL);
- WARNING("negative reply, retrying");
- }
- else
- {
- ERROR("unknown character 0x%2.2x in reply, dropping connection", reply);
- return ERROR_SERVER_REMOTE_CLOSED;
- }
- }
- else
- {
- ERROR("unknown character 0x%2.2x in reply, dropping connection", reply);
- return ERROR_SERVER_REMOTE_CLOSED;
- }
- }
- if (gdb_con->closed)
- return ERROR_SERVER_REMOTE_CLOSED;
-
- return ERROR_OK;
-}
-
-int gdb_put_packet(connection_t *connection, char *buffer, int len)
-{
- gdb_connection_t *gdb_con = connection->priv;
- gdb_con->busy = 1;
- int retval = gdb_put_packet_inner(connection, buffer, len);
- gdb_con->busy = 0;
- return retval;
-}
-
-int gdb_get_packet_inner(connection_t *connection, char *buffer, int *len)
-{
- int character;
- int count = 0;
- int retval;
- char checksum[3];
- unsigned char my_checksum = 0;
- gdb_connection_t *gdb_con = connection->priv;
-
- while (1)
- {
- do
- {
- if ((retval = gdb_get_char(connection, &character)) != ERROR_OK)
- return retval;
-
-#ifdef _DEBUG_GDB_IO_
- DEBUG("character: '%c'", character);
-#endif
-
- switch (character)
- {
- case '$':
- break;
- case '+':
- WARNING("acknowledgment received, but no packet pending");
- break;
- case '-':
- WARNING("negative acknowledgment, but no packet pending");
- break;
- case 0x3:
- gdb_con->ctrl_c = 1;
- *len = 0;
- return ERROR_OK;
- default:
- WARNING("ignoring character 0x%x", character);
- break;
- }
- } while (character != '$');
-
- my_checksum = 0;
-
- count = 0;
- gdb_connection_t *gdb_con = connection->priv;
- for (;;)
- {
- /* The common case is that we have an entire packet with no escape chars.
- * We need to leave at least 2 bytes in the buffer to have
- * gdb_get_char() update various bits and bobs correctly.
- */
- if ((gdb_con->buf_cnt > 2) && ((gdb_con->buf_cnt+count) < *len))
- {
- /* The compiler will struggle a bit with constant propagation and
- * aliasing, so we help it by showing that these values do not
- * change inside the loop
- */
- int i;
- char *buf = gdb_con->buf_p;
- int run = gdb_con->buf_cnt - 2;
- i = 0;
- int done = 0;
- while (i < run)
- {
- character = *buf++;
- i++;
- if (character == '#')
- {
- /* Danger! character can be '#' when esc is
- * used so we need an explicit boolean for done here.
- */
- done = 1;
- break;
- }
-
- if (character == '}')
- {
- /* data transmitted in binary mode (X packet)
- * uses 0x7d as escape character */
- my_checksum += character & 0xff;
- character = *buf++;
- i++;
- my_checksum += character & 0xff;
- buffer[count++] = (character ^ 0x20) & 0xff;
- } else
- {
- my_checksum += character & 0xff;
- buffer[count++] = character & 0xff;
- }
- }
- gdb_con->buf_p += i;
- gdb_con->buf_cnt -= i;
- if (done)
- break;
- }
- if (count > *len)
- {
- ERROR("packet buffer too small");
- return ERROR_GDB_BUFFER_TOO_SMALL;
- }
-
- if ((retval = gdb_get_char(connection, &character)) != ERROR_OK)
- return retval;
-
- if (character == '#')
- break;
-
- if (character == '}')
- {
- /* data transmitted in binary mode (X packet)
- * uses 0x7d as escape character */
- my_checksum += character & 0xff;
- if ((retval = gdb_get_char(connection, &character)) != ERROR_OK)
- return retval;
- my_checksum += character & 0xff;
- buffer[count++] = (character ^ 0x20) & 0xff;
- }
- else
- {
- my_checksum += character & 0xff;
- buffer[count++] = character & 0xff;
- }
-
- }
-
- *len = count;
-
- if ((retval = gdb_get_char(connection, &character)) != ERROR_OK)
- return retval;
- checksum[0] = character;
- if ((retval = gdb_get_char(connection, &character)) != ERROR_OK)
- return retval;
- checksum[1] = character;
- checksum[2] = 0;
-
- if (my_checksum == strtoul(checksum, NULL, 16))
- {
- gdb_write(connection, "+", 1);
- break;
- }
-
- WARNING("checksum error, requesting retransmission");
- gdb_write(connection, "-", 1);
- }
- if (gdb_con->closed)
- return ERROR_SERVER_REMOTE_CLOSED;
-
- return ERROR_OK;
-}
-
-int gdb_get_packet(connection_t *connection, char *buffer, int *len)
-{
- gdb_connection_t *gdb_con = connection->priv;
- gdb_con->busy = 1;
- int retval = gdb_get_packet_inner(connection, buffer, len);
- gdb_con->busy = 0;
- return retval;
-}
-
-int gdb_output_con(connection_t *connection, char* line)
-{
- char *hex_buffer;
- int i, bin_size;
-
- bin_size = strlen(line);
-
- hex_buffer = malloc(bin_size*2 + 4);
-
- hex_buffer[0] = 'O';
- for (i=0; i<bin_size; i++)
- snprintf(hex_buffer + 1 + i*2, 3, "%2.2x", line[i]);
- hex_buffer[bin_size*2+1] = '0';
- hex_buffer[bin_size*2+2] = 'a';
- hex_buffer[bin_size*2+3] = 0x0;
-
- gdb_put_packet(connection, hex_buffer, bin_size*2 + 3);
-
- free(hex_buffer);
- return ERROR_OK;
-}
-
-int gdb_output(struct command_context_s *context, char* line)
-{
- /* this will be dumped to the log and also sent as an O packet if possible */
- USER(line);
- return ERROR_OK;
-}
-
-int gdb_program_handler(struct target_s *target, enum target_event event, void *priv)
-{
- FILE *script;
- struct command_context_s *cmd_ctx = priv;
-
- if (target->gdb_program_script)
- {
- script = open_file_from_path(cmd_ctx, target->gdb_program_script, "r");
- if (!script)
- {
- ERROR("couldn't open script file %s", target->gdb_program_script);
- return ERROR_OK;
- }
-
- INFO("executing gdb_program script '%s'", target->gdb_program_script);
- command_run_file(cmd_ctx, script, COMMAND_EXEC);
- fclose(script);
-
- jtag_execute_queue();
- }
-
- return ERROR_OK;
-}
-
-int gdb_target_callback_event_handler(struct target_s *target, enum target_event event, void *priv)
-{
- connection_t *connection = priv;
- gdb_connection_t *gdb_connection = connection->priv;
- char sig_reply[4];
- int signal;
-
- switch (event)
- {
- case TARGET_EVENT_HALTED:
- /* In the GDB protocol when we are stepping or coninuing execution,
- * we have a lingering reply. Upon receiving a halted event
- * when we have that lingering packet, we reply to the original
- * step or continue packet.
- *
- * Executing monitor commands can bring the target in and
- * out of the running state so we'll see lots of TARGET_EVENT_XXX
- * that are to be ignored.
- */
- if (gdb_connection->frontend_state == TARGET_RUNNING)
- {
- /* stop forwarding log packets! */
- log_setCallback(NULL, NULL);
-
- if (gdb_connection->ctrl_c)
- {
- signal = 0x2;
- gdb_connection->ctrl_c = 0;
- }
- else
- {
- signal = gdb_last_signal(target);
- }
-
- snprintf(sig_reply, 4, "T%2.2x", signal);
- gdb_put_packet(connection, sig_reply, 3);
- gdb_connection->frontend_state = TARGET_HALTED;
- }
- break;
- case TARGET_EVENT_GDB_PROGRAM:
- gdb_program_handler(target, event, connection->cmd_ctx);
- break;
- default:
- break;
- }
-
- return ERROR_OK;
-}
-
-int gdb_new_connection(connection_t *connection)
-{
- gdb_connection_t *gdb_connection = malloc(sizeof(gdb_connection_t));
- gdb_service_t *gdb_service = connection->service->priv;
- int retval;
- int initial_ack;
-
- connection->priv = gdb_connection;
-
- /* initialize gdb connection information */
- gdb_connection->buf_p = gdb_connection->buffer;
- gdb_connection->buf_cnt = 0;
- gdb_connection->ctrl_c = 0;
- gdb_connection->frontend_state = TARGET_HALTED;
- gdb_connection->vflash_image = NULL;
- gdb_connection->closed = 0;
- gdb_connection->busy = 0;
-
- /* output goes through gdb connection */
- command_set_output_handler(connection->cmd_ctx, gdb_output, connection);
-
- /* register callback to be informed about target events */
- target_register_event_callback(gdb_target_callback_event_handler, connection);
-
- /* a gdb session just attached, put the target in halt mode */
- if (((retval = gdb_service->target->type->halt(gdb_service->target)) != ERROR_OK) &&
- (retval != ERROR_TARGET_ALREADY_HALTED))
- {
- ERROR("error(%d) when trying to halt target, falling back to \"reset halt\"", retval);
- command_run_line(connection->cmd_ctx, "reset halt");
- }
-
- /* This will time out after 1 second */
- command_run_line(connection->cmd_ctx, "wait_halt 1");
-
- /* remove the initial ACK from the incoming buffer */
- if ((retval = gdb_get_char(connection, &initial_ack)) != ERROR_OK)
- return retval;
-
- if (initial_ack != '+')
- gdb_putback_char(connection, initial_ack);
-
- return ERROR_OK;
-}
-
-int gdb_connection_closed(connection_t *connection)
-{
- gdb_service_t *gdb_service = connection->service->priv;
- gdb_connection_t *gdb_connection = connection->priv;
-
- /* see if an image built with vFlash commands is left */
- if (gdb_connection->vflash_image)
- {
- image_close(gdb_connection->vflash_image);
- free(gdb_connection->vflash_image);
- gdb_connection->vflash_image = NULL;
- }
-
- /* if this connection registered a debug-message receiver delete it */
- delete_debug_msg_receiver(connection->cmd_ctx, gdb_service->target);
-
- if (connection->priv)
- {
- free(connection->priv);
- connection->priv = NULL;
- }
- else
- {
- ERROR("BUG: connection->priv == NULL");
- }
-
- target_unregister_event_callback(gdb_target_callback_event_handler, connection);
- log_setCallback(NULL, NULL);
-
- return ERROR_OK;
-}
-
-void gdb_send_error(connection_t *connection, u8 the_error)
-{
- char err[4];
- snprintf(err, 4, "E%2.2X", the_error );
- gdb_put_packet(connection, err, 3);
-}
-
-int gdb_last_signal_packet(connection_t *connection, target_t *target, char* packet, int packet_size)
-{
- char sig_reply[4];
- int signal;
-
- signal = gdb_last_signal(target);
-
- snprintf(sig_reply, 4, "S%2.2x", signal);
- gdb_put_packet(connection, sig_reply, 3);
-
- return ERROR_OK;
-}
-
-/* Convert register to string of bits. NB! The # of bits in the
- * register might be non-divisible by 8(a byte), in which
- * case an entire byte is shown. */
-void gdb_str_to_target(target_t *target, char *tstr, reg_t *reg)
-{
- int i;
-
- u8 *buf;
- int buf_len;
- buf = reg->value;
- buf_len = CEIL(reg->size, 8);
-
- if (target->endianness == TARGET_LITTLE_ENDIAN)
- {
- for (i = 0; i < buf_len; i++)
- {
- tstr[i*2] = DIGITS[(buf[i]>>4) & 0xf];
- tstr[i*2+1] = DIGITS[buf[i]&0xf];
- }
- }
- else
- {
- for (i = 0; i < buf_len; i++)
- {
- tstr[(buf_len-1-i)*2] = DIGITS[(buf[i]>>4)&0xf];
- tstr[(buf_len-1-i)*2+1] = DIGITS[buf[i]&0xf];
- }
- }
-}
-
-void gdb_target_to_str(target_t *target, char *tstr, char *str)
-{
- int str_len = strlen(tstr);
- int i;
-
- if (str_len % 2)
- {
- ERROR("BUG: gdb value with uneven number of characters encountered");
- exit(-1);
- }
-
- if (target->endianness == TARGET_LITTLE_ENDIAN)
- {
- for (i = 0; i < str_len; i+=2)
- {
- str[str_len - i - 1] = tstr[i + 1];
- str[str_len - i - 2] = tstr[i];
- }
- }
- else
- {
- for (i = 0; i < str_len; i++)
- {
- str[i] = tstr[i];
- }
- }
-}
-
-int gdb_get_registers_packet(connection_t *connection, target_t *target, char* packet, int packet_size)
-{
- reg_t **reg_list;
- int reg_list_size;
- int retval;
- int reg_packet_size = 0;
- char *reg_packet;
- char *reg_packet_p;
- int i;
-
-#ifdef _DEBUG_GDB_IO_
- DEBUG("-");
-#endif
-
- if ((retval = target->type->get_gdb_reg_list(target, &reg_list, &reg_list_size)) != ERROR_OK)
- {
- switch (retval)
- {
- case ERROR_TARGET_NOT_HALTED:
- ERROR("gdb requested registers but we're not halted, dropping connection");
- return ERROR_SERVER_REMOTE_CLOSED;
- default:
- /* this is a bug condition - get_gdb_reg_list() may not return any other error */
- ERROR("BUG: unexpected error returned by get_gdb_reg_list()");
- exit(-1);
- }
- }
-
- for (i = 0; i < reg_list_size; i++)
- {
- reg_packet_size += reg_list[i]->size;
- }
-
- reg_packet = malloc(CEIL(reg_packet_size, 8) * 2);
- reg_packet_p = reg_packet;
-
- for (i = 0; i < reg_list_size; i++)
- {
- gdb_str_to_target(target, reg_packet_p, reg_list[i]);
- reg_packet_p += CEIL(reg_list[i]->size, 8) * 2;
- }
-
-#ifdef _DEBUG_GDB_IO_
- {
- char *reg_packet_p;
- reg_packet_p = strndup(reg_packet, CEIL(reg_packet_size, 8) * 2);
- DEBUG("reg_packet: %s", reg_packet_p);
- free(reg_packet_p);
- }
-#endif
-
- gdb_put_packet(connection, reg_packet, CEIL(reg_packet_size, 8) * 2);
- free(reg_packet);
-
- free(reg_list);
-
- return ERROR_OK;
-}
-
-int gdb_set_registers_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
-{
- int i;
- reg_t **reg_list;
- int reg_list_size;
- int retval;
- char *packet_p;
-
-#ifdef _DEBUG_GDB_IO_
- DEBUG("-");
-#endif
-
- /* skip command character */
- packet++;
- packet_size--;
-
- if (packet_size % 2)
- {
- WARNING("GDB set_registers packet with uneven characters received, dropping connection");
- return ERROR_SERVER_REMOTE_CLOSED;
- }
-
- if ((retval = target->type->get_gdb_reg_list(target, &reg_list, &reg_list_size)) != ERROR_OK)
- {
- switch (retval)
- {
- case ERROR_TARGET_NOT_HALTED:
- ERROR("gdb tried to registers but we're not halted, dropping connection");
- return ERROR_SERVER_REMOTE_CLOSED;
- default:
- /* this is a bug condition - get_gdb_reg_list() may not return any other error */
- ERROR("BUG: unexpected error returned by get_gdb_reg_list()");
- exit(-1);
- }
- }
-
- packet_p = packet;
- for (i = 0; i < reg_list_size; i++)
- {
- u8 *bin_buf;
- char *hex_buf;
- reg_arch_type_t *arch_type;
-
- /* convert from GDB-string (target-endian) to hex-string (big-endian) */
- hex_buf = malloc(CEIL(reg_list[i]->size, 8) * 2);
- gdb_target_to_str(target, packet_p, hex_buf);
-
- /* convert hex-string to binary buffer */
- bin_buf = malloc(CEIL(reg_list[i]->size, 8));
- str_to_buf(hex_buf, CEIL(reg_list[i]->size, 8) * 2, bin_buf, reg_list[i]->size, 16);
-
- /* get register arch_type, and call set method */
- arch_type = register_get_arch_type(reg_list[i]->arch_type);
- if (arch_type == NULL)
- {
- ERROR("BUG: encountered unregistered arch type");
- exit(-1);
- }
- arch_type->set(reg_list[i], bin_buf);
-
- /* advance packet pointer */
- packet_p += (CEIL(reg_list[i]->size, 8) * 2);
-
- free(bin_buf);
- free(hex_buf);
- }
-
- /* free reg_t *reg_list[] array allocated by get_gdb_reg_list */
- free(reg_list);
-
- gdb_put_packet(connection, "OK", 2);
-
- return ERROR_OK;
-}
-
-int gdb_get_register_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
-{
- char *reg_packet;
- int reg_num = strtoul(packet + 1, NULL, 16);
- reg_t **reg_list;
- int reg_list_size;
- int retval;
-
-#ifdef _DEBUG_GDB_IO_
- DEBUG("-");
-#endif
-
- if ((retval = target->type->get_gdb_reg_list(target, &reg_list, &reg_list_size)) != ERROR_OK)
- {
- switch (retval)
- {
- case ERROR_TARGET_NOT_HALTED:
- ERROR("gdb requested registers but we're not halted, dropping connection");
- return ERROR_SERVER_REMOTE_CLOSED;
- default:
- /* this is a bug condition - get_gdb_reg_list() may not return any other error */
- ERROR("BUG: unexpected error returned by get_gdb_reg_list()");
- exit(-1);
- }
- }
-
- if (reg_list_size <= reg_num)
- {
- ERROR("gdb requested a non-existing register");
- exit(-1);
- }
-
- reg_packet = malloc(CEIL(reg_list[reg_num]->size, 8) * 2);
-
- gdb_str_to_target(target, reg_packet, reg_list[reg_num]);
-
- gdb_put_packet(connection, reg_packet, CEIL(reg_list[reg_num]->size, 8) * 2);
-
- free(reg_list);
- free(reg_packet);
-
- return ERROR_OK;
-}
-
-int gdb_set_register_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
-{
- char *separator;
- char *hex_buf;
- u8 *bin_buf;
- int reg_num = strtoul(packet + 1, &separator, 16);
- reg_t **reg_list;
- int reg_list_size;
- int retval;
- reg_arch_type_t *arch_type;
-
- DEBUG("-");
-
- if ((retval = target->type->get_gdb_reg_list(target, &reg_list, &reg_list_size)) != ERROR_OK)
- {
- switch (retval)
- {
- case ERROR_TARGET_NOT_HALTED:
- ERROR("gdb tried to set a register but we're not halted, dropping connection");
- return ERROR_SERVER_REMOTE_CLOSED;
- default:
- /* this is a bug condition - get_gdb_reg_list() may not return any other error */
- ERROR("BUG: unexpected error returned by get_gdb_reg_list()");
- exit(-1);
- }
- }
-
- if (reg_list_size < reg_num)
- {
- ERROR("gdb requested a non-existing register");
- return ERROR_SERVER_REMOTE_CLOSED;
- }
-
- if (*separator != '=')
- {
- ERROR("GDB 'set register packet', but no '=' following the register number");
- return ERROR_SERVER_REMOTE_CLOSED;
- }
-
- /* convert from GDB-string (target-endian) to hex-string (big-endian) */
- hex_buf = malloc(CEIL(reg_list[reg_num]->size, 8) * 2);
- gdb_target_to_str(target, separator + 1, hex_buf);
-
- /* convert hex-string to binary buffer */
- bin_buf = malloc(CEIL(reg_list[reg_num]->size, 8));
- str_to_buf(hex_buf, CEIL(reg_list[reg_num]->size, 8) * 2, bin_buf, reg_list[reg_num]->size, 16);
-
- /* get register arch_type, and call set method */
- arch_type = register_get_arch_type(reg_list[reg_num]->arch_type);
- if (arch_type == NULL)
- {
- ERROR("BUG: encountered unregistered arch type");
- exit(-1);
- }
- arch_type->set(reg_list[reg_num], bin_buf);
-
- gdb_put_packet(connection, "OK", 2);
-
- free(bin_buf);
- free(hex_buf);
- free(reg_list);
-
- return ERROR_OK;
-}
-
-int gdb_memory_packet_error(connection_t *connection, int retval)
-{
- switch (retval)
- {
- case ERROR_TARGET_NOT_HALTED:
- ERROR("gdb tried to read memory but we're not halted, dropping connection");
- return ERROR_SERVER_REMOTE_CLOSED;
- case ERROR_TARGET_DATA_ABORT:
- gdb_send_error(connection, EIO);
- break;
- case ERROR_TARGET_TRANSLATION_FAULT:
- gdb_send_error(connection, EFAULT);
- break;
- case ERROR_TARGET_UNALIGNED_ACCESS:
- gdb_send_error(connection, EFAULT);
- break;
- default:
- /* This could be that the target reset itself. */
- ERROR("unexpected error %i. Dropping connection.", retval);
- return ERROR_SERVER_REMOTE_CLOSED;
- }
-
- return ERROR_OK;
-}
-
-/* We don't have to worry about the default 2 second timeout for GDB packets,
- * because GDB breaks up large memory reads into smaller reads.
- *
- * 8191 bytes by the looks of it. Why 8191 bytes instead of 8192?????
- */
-int gdb_read_memory_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
-{
- char *separator;
- u32 addr = 0;
- u32 len = 0;
-
- u8 *buffer;
- char *hex_buffer;
-
- int retval = ERROR_OK;
-
- /* skip command character */
- packet++;
-
- addr = strtoul(packet, &separator, 16);
-
- if (*separator != ',')
- {
- ERROR("incomplete read memory packet received, dropping connection");
- return ERROR_SERVER_REMOTE_CLOSED;
- }
-
- len = strtoul(separator+1, NULL, 16);
-
- buffer = malloc(len);
-
- DEBUG("addr: 0x%8.8x, len: 0x%8.8x", addr, len);
-
- retval = target_read_buffer(target, addr, len, buffer);
-
- if ((retval == ERROR_TARGET_DATA_ABORT) && (!gdb_report_data_abort))
- {
- /* TODO : Here we have to lie and send back all zero's lest stack traces won't work.
- * At some point this might be fixed in GDB, in which case this code can be removed.
- *
- * OpenOCD developers are acutely aware of this problem, but there is nothing
- * gained by involving the user in this problem that hopefully will get resolved
- * eventually
- *
- * http://sourceware.org/cgi-bin/gnatsweb.pl?cmd=view%20audit-trail&database=gdb&pr=2395
- *
- * For now, the default is to fix up things to make current GDB versions work.
- * This can be overwritten using the gdb_report_data_abort <'enable'|'disable'> command.
- */
- memset(buffer, 0, len);
- retval = ERROR_OK;
- }
-
- if (retval == ERROR_OK)
- {
- hex_buffer = malloc(len * 2 + 1);
-
- int i;
- for (i = 0; i < len; i++)
- {
- u8 t = buffer[i];
- hex_buffer[2 * i] = DIGITS[(t >> 4) & 0xf];
- hex_buffer[2 * i + 1] = DIGITS[t & 0xf];
- }
-
- gdb_put_packet(connection, hex_buffer, len * 2);
-
- free(hex_buffer);
- }
- else
- {
- retval = gdb_memory_packet_error(connection, retval);
- }
-
- free(buffer);
-
- return retval;
-}
-
-int gdb_write_memory_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
-{
- char *separator;
- u32 addr = 0;
- u32 len = 0;
-
- u8 *buffer;
-
- int i;
- int retval;
-
- /* skip command character */
- packet++;
-
- addr = strtoul(packet, &separator, 16);
-
- if (*separator != ',')
- {
- ERROR("incomplete write memory packet received, dropping connection");
- return ERROR_SERVER_REMOTE_CLOSED;
- }
-
- len = strtoul(separator+1, &separator, 16);
-
- if (*(separator++) != ':')
- {
- ERROR("incomplete write memory packet received, dropping connection");
- return ERROR_SERVER_REMOTE_CLOSED;
- }
-
- buffer = malloc(len);
-
- DEBUG("addr: 0x%8.8x, len: 0x%8.8x", addr, len);
-
- for (i=0; i<len; i++)
- {
- u32 tmp;
- sscanf(separator + 2*i, "%2x", &tmp);
- buffer[i] = tmp;
- }
-
- retval = target_write_buffer(target, addr, len, buffer);
-
- if (retval == ERROR_OK)
- {
- gdb_put_packet(connection, "OK", 2);
- }
- else
- {
- if ((retval = gdb_memory_packet_error(connection, retval)) != ERROR_OK)
- return retval;
- }
-
- free(buffer);
-
- return ERROR_OK;
-}
-
-int gdb_write_memory_binary_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
-{
- char *separator;
- u32 addr = 0;
- u32 len = 0;
-
- int retval;
-
- /* skip command character */
- packet++;
-
- addr = strtoul(packet, &separator, 16);
-
- if (*separator != ',')
- {
- ERROR("incomplete write memory binary packet received, dropping connection");
- return ERROR_SERVER_REMOTE_CLOSED;
- }
-
- len = strtoul(separator+1, &separator, 16);
-
- if (*(separator++) != ':')
- {
- ERROR("incomplete write memory binary packet received, dropping connection");
- return ERROR_SERVER_REMOTE_CLOSED;
- }
-
- retval = ERROR_OK;
- if (len)
- {
- DEBUG("addr: 0x%8.8x, len: 0x%8.8x", addr, len);
-
- retval = target_write_buffer(target, addr, len, (u8*)separator);
- }
-
- if (retval == ERROR_OK)
- {
- gdb_put_packet(connection, "OK", 2);
- }
- else
- {
- if ((retval = gdb_memory_packet_error(connection, retval)) != ERROR_OK)
- return retval;
- }
-
- return ERROR_OK;
-}
-
-void gdb_step_continue_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
-{
- int current = 0;
- u32 address = 0x0;
-
- DEBUG("-");
-
- if (packet_size > 1)
- {
- packet[packet_size] = 0;
- address = strtoul(packet + 1, NULL, 16);
- }
- else
- {
- current = 1;
- }
-
- if (packet[0] == 'c')
- {
- DEBUG("continue");
- target->type->resume(target, current, address, 0, 0); /* resume at current address, don't handle breakpoints, not debugging */
- }
- else if (packet[0] == 's')
- {
- DEBUG("step");
- target->type->step(target, current, address, 0); /* step at current or address, don't handle breakpoints */
- }
-}
-
-int gdb_bp_wp_packet_error(connection_t *connection, int retval)
-{
- switch (retval)
- {
- case ERROR_TARGET_NOT_HALTED:
- ERROR("gdb tried to set a breakpoint but we're not halted, dropping connection");
- return ERROR_SERVER_REMOTE_CLOSED;
- break;
- case ERROR_TARGET_RESOURCE_NOT_AVAILABLE:
- gdb_send_error(connection, EBUSY);
- break;
- default:
- ERROR("BUG: unexpected error %i", retval);
- exit(-1);
- }
-
- return ERROR_OK;
-}
-
-int gdb_breakpoint_watchpoint_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
-{
- int type;
- enum breakpoint_type bp_type = BKPT_SOFT /* dummy init to avoid warning */;
- enum watchpoint_rw wp_type;
- u32 address;
- u32 size;
- char *separator;
- int retval;
-
- DEBUG("-");
-
- type = strtoul(packet + 1, &separator, 16);
-
- if (type == 0) /* memory breakpoint */
- bp_type = BKPT_SOFT;
- else if (type == 1) /* hardware breakpoint */
- bp_type = BKPT_HARD;
- else if (type == 2) /* write watchpoint */
- wp_type = WPT_WRITE;
- else if (type == 3) /* read watchpoint */
- wp_type = WPT_READ;
- else if (type == 4) /* access watchpoint */
- wp_type = WPT_ACCESS;
-
- if (*separator != ',')
- {
- ERROR("incomplete breakpoint/watchpoint packet received, dropping connection");
- return ERROR_SERVER_REMOTE_CLOSED;
- }
-
- address = strtoul(separator+1, &separator, 16);
-
- if (*separator != ',')
- {
- ERROR("incomplete breakpoint/watchpoint packet received, dropping connection");
- return ERROR_SERVER_REMOTE_CLOSED;
- }
-
- size = strtoul(separator+1, &separator, 16);
-
- switch (type)
- {
- case 0:
- case 1:
- if (packet[0] == 'Z')
- {
- if ((retval = breakpoint_add(target, address, size, bp_type)) != ERROR_OK)
- {
- if ((retval = gdb_bp_wp_packet_error(connection, retval)) != ERROR_OK)
- return retval;
- }
- else
- {
- gdb_put_packet(connection, "OK", 2);
- }
- }
- else
- {
- breakpoint_remove(target, address);
- gdb_put_packet(connection, "OK", 2);
- }
- break;
- case 2:
- case 3:
- case 4:
- {
- if (packet[0] == 'Z')
- {
- if ((retval = watchpoint_add(target, address, size, type-2, 0, 0xffffffffu)) != ERROR_OK)
- {
- if ((retval = gdb_bp_wp_packet_error(connection, retval)) != ERROR_OK)
- return retval;
- }
- else
- {
- gdb_put_packet(connection, "OK", 2);
- }
- }
- else
- {
- watchpoint_remove(target, address);
- gdb_put_packet(connection, "OK", 2);
- }
- break;
- }
- default:
- break;
- }
-
- return ERROR_OK;
-}
-
-/* print out a string and allocate more space as needed, mainly used for XML at this point */
-void xml_printf(int *retval, char **xml, int *pos, int *size, const char *fmt, ...)
-{
- if (*retval != ERROR_OK)
- {
- return;
- }
- int first = 1;
-
- for (;;)
- {
- if ((*xml == NULL) || (!first))
- {
- /* start by 0 to exercise all the code paths.
- * Need minimum 2 bytes to fit 1 char and 0 terminator. */
-
- *size = *size * 2 + 2;
- char *t = *xml;
- *xml = realloc(*xml, *size);
- if (*xml == NULL)
- {
- if (t)
- free(t);
- *retval = ERROR_SERVER_REMOTE_CLOSED;
- return;
- }
- }
-
- va_list ap;
- int ret;
- va_start(ap, fmt);
- ret = vsnprintf(*xml + *pos, *size - *pos, fmt, ap);
- va_end(ap);
- if ((ret > 0) && ((ret + 1) < *size - *pos))
- {
- *pos += ret;
- return;
- }
- /* there was just enough or not enough space, allocate more. */
- first = 0;
- }
-}
-
-static int decode_xfer_read(char *buf, char **annex, int *ofs, unsigned int *len)
-{
- char *separator;
-
- /* Extract and NUL-terminate the annex. */
- *annex = buf;
- while (*buf && *buf != ':')
- buf++;
- if (*buf == '\0')
- return -1;
- *buf++ = 0;
-
- /* After the read marker and annex, qXfer looks like a
- * traditional 'm' packet. */
-
- *ofs = strtoul(buf, &separator, 16);
-
- if (*separator != ',')
- return -1;
-
- *len = strtoul(separator+1, NULL, 16);
-
- return 0;
-}
-
-int gdb_calc_blocksize(flash_bank_t *bank)
-{
- int i;
- int block_size = 0xffffffff;
-
- /* loop through all sectors and return smallest sector size */
-
- for (i = 0; i < bank->num_sectors; i++)
- {
- if (bank->sectors[i].size < block_size)
- block_size = bank->sectors[i].size;
- }
-
- return block_size;
-}
-
-int gdb_query_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
-{
- command_context_t *cmd_ctx = connection->cmd_ctx;
-
- if (strstr(packet, "qRcmd,"))
- {
- if (packet_size > 6)
- {
- char *cmd;
- int i;
- cmd = malloc((packet_size - 6)/2 + 1);
- for (i=0; i < (packet_size - 6)/2; i++)
- {
- u32 tmp;
- sscanf(packet + 6 + 2*i, "%2x", &tmp);
- cmd[i] = tmp;
- }
- cmd[(packet_size - 6)/2] = 0x0;
-
- /* We want to print all debug output to GDB connection */
- log_setCallback(gdb_log_callback, connection);
- target_call_timer_callbacks();
- command_run_line(cmd_ctx, cmd);
- free(cmd);
- }
- gdb_put_packet(connection, "OK", 2);
- return ERROR_OK;
- }
- else if (strstr(packet, "qCRC:"))
- {
- if (packet_size > 5)
- {
- int retval;
- char gdb_reply[10];
- char *separator;
- u32 checksum;
- u32 addr = 0;
- u32 len = 0;
-
- /* skip command character */
- packet += 5;
-
- addr = strtoul(packet, &separator, 16);
-
- if (*separator != ',')
- {
- ERROR("incomplete read memory packet received, dropping connection");
- return ERROR_SERVER_REMOTE_CLOSED;
- }
-
- len = strtoul(separator + 1, NULL, 16);
-
- retval = target_checksum_memory(target, addr, len, &checksum);
-
- if (retval == ERROR_OK)
- {
- snprintf(gdb_reply, 10, "C%8.8x", checksum);
- gdb_put_packet(connection, gdb_reply, 9);
- }
- else
- {
- if ((retval = gdb_memory_packet_error(connection, retval)) != ERROR_OK)
- return retval;
- }
-
- return ERROR_OK;
- }
- }
- else if (strstr(packet, "qSupported"))
- {
- /* we currently support packet size and qXfer:memory-map:read (if enabled)
- * disable qXfer:features:read for the moment */
- int retval = ERROR_OK;
- char *buffer = NULL;
- int pos = 0;
- int size = 0;
-
- xml_printf(&retval, &buffer, &pos, &size,
- "PacketSize=%x;qXfer:memory-map:read%c;qXfer:features:read-",
- (GDB_BUFFER_SIZE - 1), gdb_use_memory_map == 1 ? '+' : '-');
-
- if (retval != ERROR_OK)
- {
- gdb_send_error(connection, 01);
- return ERROR_OK;
- }
-
- gdb_put_packet(connection, buffer, strlen(buffer));
- free(buffer);
-
- return ERROR_OK;
- }
- else if (strstr(packet, "qXfer:memory-map:read::"))
- {
- /* We get away with only specifying flash here. Regions that are not
- * specified are treated as if we provided no memory map(if not we
- * could detect the holes and mark them as RAM).
- * Normally we only execute this code once, but no big deal if we
- * have to regenerate it a couple of times. */
-
- flash_bank_t *p;
- char *xml = NULL;
- int size = 0;
- int pos = 0;
- int retval = ERROR_OK;
-
- int offset;
- int length;
- char *separator;
- int blocksize;
-
- /* skip command character */
- packet += 23;
-
- offset = strtoul(packet, &separator, 16);
- length = strtoul(separator + 1, &separator, 16);
-
- xml_printf(&retval, &xml, &pos, &size, "<memory-map>\n");
-
- int i = 0;
- for (;;)
- {
- p = get_flash_bank_by_num(i);
- if (p == NULL)
- break;
-
- /* if device has uneven sector sizes, eg. str7, lpc
- * we pass the smallest sector size to gdb memory map */
- blocksize = gdb_calc_blocksize(p);
-
- xml_printf(&retval, &xml, &pos, &size, "<memory type=\"flash\" start=\"0x%x\" length=\"0x%x\">\n" \
- "<property name=\"blocksize\">0x%x</property>\n" \
- "</memory>\n", \
- p->base, p->size, blocksize);
- i++;
- }
-
- xml_printf(&retval, &xml, &pos, &size, "</memory-map>\n");
-
- if (retval != ERROR_OK)
- {
- gdb_send_error(connection, retval);
- return retval;
- }
-
- if (offset + length > pos)
- {
- length = pos - offset;
- }
-
- char *t = malloc(length + 1);
- t[0] = 'l';
- memcpy(t + 1, xml + offset, length);
- gdb_put_packet(connection, t, length + 1);
-
- free(t);
- free(xml);
- return ERROR_OK;
- }
- else if (strstr(packet, "qXfer:features:read:"))
- {
- char *xml = NULL;
- int size = 0;
- int pos = 0;
- int retval = ERROR_OK;
-
- int offset;
- unsigned int length;
- char *annex;
-
- /* skip command character */
- packet += 20;
-
- if (decode_xfer_read(packet, &annex, &offset, &length) < 0)
- {
- gdb_send_error(connection, 01);
- return ERROR_OK;
- }
-
- if (strcmp(annex, "target.xml") != 0)
- {
- gdb_send_error(connection, 01);
- return ERROR_OK;
- }
-
- xml_printf(&retval, &xml, &pos, &size, \
- "l<target version=\"1.0\">\n<architecture>arm</architecture>\n</target>\n");
-
- if (retval != ERROR_OK)
- {
- gdb_send_error(connection, retval);
- return retval;
- }
-
- gdb_put_packet(connection, xml, strlen(xml) + 1);
-
- free(xml);
- return ERROR_OK;
- }
-
- gdb_put_packet(connection, "", 0);
- return ERROR_OK;
-}
-
-int gdb_v_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
-{
- gdb_connection_t *gdb_connection = connection->priv;
- gdb_service_t *gdb_service = connection->service->priv;
- int result;
-
- /* if flash programming disabled - send a empty reply */
-
- if (gdb_flash_program == 0)
- {
- gdb_put_packet(connection, "", 0);
- return ERROR_OK;
- }
-
- if (strstr(packet, "vFlashErase:"))
- {
- unsigned long addr;
- unsigned long length;
-
- char *parse = packet + 12;
- if (*parse == '\0')
- {
- ERROR("incomplete vFlashErase packet received, dropping connection");
- return ERROR_SERVER_REMOTE_CLOSED;
- }
-
- addr = strtoul(parse, &parse, 16);
-
- if (*(parse++) != ',' || *parse == '\0')
- {
- ERROR("incomplete vFlashErase packet received, dropping connection");
- return ERROR_SERVER_REMOTE_CLOSED;
- }
-
- length = strtoul(parse, &parse, 16);
-
- if (*parse != '\0')
- {
- ERROR("incomplete vFlashErase packet received, dropping connection");
- return ERROR_SERVER_REMOTE_CLOSED;
- }
-
- /* assume all sectors need erasing - stops any problems
- * when flash_write is called multiple times */
- flash_set_dirty();
-
- /* perform any target specific operations before the erase */
- target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_PROGRAM);
-
- /* perform erase */
- if ((result = flash_erase_address_range(gdb_service->target, addr, length)) != ERROR_OK)
- {
- /* GDB doesn't evaluate the actual error number returned,
- * treat a failed erase as an I/O error
- */
- gdb_send_error(connection, EIO);
- ERROR("flash_erase returned %i", result);
- }
- else
- gdb_put_packet(connection, "OK", 2);
-
- return ERROR_OK;
- }
-
- if (strstr(packet, "vFlashWrite:"))
- {
- unsigned long addr;
- unsigned long length;
- char *parse = packet + 12;
-
- if (*parse == '\0')
- {
- ERROR("incomplete vFlashErase packet received, dropping connection");
- return ERROR_SERVER_REMOTE_CLOSED;
- }
- addr = strtoul(parse, &parse, 16);
- if (*(parse++) != ':')
- {
- ERROR("incomplete vFlashErase packet received, dropping connection");
- return ERROR_SERVER_REMOTE_CLOSED;
- }
- length = packet_size - (parse - packet);
-
- /* create a new image if there isn't already one */
- if (gdb_connection->vflash_image == NULL)
- {
- gdb_connection->vflash_image = malloc(sizeof(image_t));
- image_open(gdb_connection->vflash_image, "", "build");
- }
-
- /* create new section with content from packet buffer */
- image_add_section(gdb_connection->vflash_image, addr, length, 0x0, (u8*)parse);
-
- gdb_put_packet(connection, "OK", 2);
-
- return ERROR_OK;
- }
-
- if (!strcmp(packet, "vFlashDone"))
- {
- u32 written;
-
- /* process the flashing buffer. No need to erase as GDB
- * always issues a vFlashErase first. */
- if ((result = flash_write(gdb_service->target, gdb_connection->vflash_image, &written, 0)) != ERROR_OK)
- {
- if (result == ERROR_FLASH_DST_OUT_OF_BANK)
- gdb_put_packet(connection, "E.memtype", 9);
- else
- gdb_send_error(connection, EIO);
- }
- else
- {
- DEBUG("wrote %u bytes from vFlash image to flash", written);
- gdb_put_packet(connection, "OK", 2);
- }
-
- image_close(gdb_connection->vflash_image);
- free(gdb_connection->vflash_image);
- gdb_connection->vflash_image = NULL;
-
- return ERROR_OK;
- }
-
- gdb_put_packet(connection, "", 0);
- return ERROR_OK;
-}
-
-int gdb_detach(connection_t *connection, target_t *target)
-{
- switch( detach_mode )
- {
- case GDB_DETACH_RESUME:
- target->type->resume(target, 1, 0, 1, 0);
- break;
-
- case GDB_DETACH_RESET:
- target_process_reset(connection->cmd_ctx);
- break;
-
- case GDB_DETACH_HALT:
- target->type->halt(target);
- break;
-
- case GDB_DETACH_NOTHING:
- break;
- }
-
- gdb_put_packet(connection, "OK", 2);
-
- return ERROR_OK;
-}
-
-static void gdb_log_callback(void *priv, const char *file, int line,
- const char *function, const char *format, va_list args)
-{
- connection_t *connection = priv;
- gdb_connection_t *gdb_con = connection->priv;
-
- if (gdb_con->busy)
- {
- /* do not reply this using the O packet */
- return;
- }
-
- char *t = allocPrintf(format, args);
- if (t == NULL)
- return;
-
- gdb_output_con(connection, t);
-
- free(t);
-}
-
-int gdb_input_inner(connection_t *connection)
-{
- gdb_service_t *gdb_service = connection->service->priv;
- target_t *target = gdb_service->target;
- char packet[GDB_BUFFER_SIZE];
- int packet_size;
- int retval;
- gdb_connection_t *gdb_con = connection->priv;
- static int extended_protocol = 0;
-
- /* drain input buffer */
- do
- {
- packet_size = GDB_BUFFER_SIZE-1;
- if ((retval = gdb_get_packet(connection, packet, &packet_size)) != ERROR_OK)
- {
- return retval;
- }
-
- /* terminate with zero */
- packet[packet_size] = 0;
-
- DEBUG("received packet: '%s'", packet);
-
- if (packet_size > 0)
- {
- retval = ERROR_OK;
- switch (packet[0])
- {
- case 'H':
- /* Hct... -- set thread
- * we don't have threads, send empty reply */
- gdb_put_packet(connection, NULL, 0);
- break;
- case 'q':
- retval = gdb_query_packet(connection, target, packet, packet_size);
- break;
- case 'g':
- retval = gdb_get_registers_packet(connection, target, packet, packet_size);
- break;
- case 'G':
- retval = gdb_set_registers_packet(connection, target, packet, packet_size);
- break;
- case 'p':
- retval = gdb_get_register_packet(connection, target, packet, packet_size);
- break;
- case 'P':
- retval = gdb_set_register_packet(connection, target, packet, packet_size);
- break;
- case 'm':
- retval = gdb_read_memory_packet(connection, target, packet, packet_size);
- break;
- case 'M':
- retval = gdb_write_memory_packet(connection, target, packet, packet_size);
- break;
- case 'z':
- case 'Z':
- retval = gdb_breakpoint_watchpoint_packet(connection, target, packet, packet_size);
- break;
- case '?':
- gdb_last_signal_packet(connection, target, packet, packet_size);
- break;
- case 'c':
- case 's':
- {
- /* We're running/stepping, in which case we can
- * forward log output until the target is halted */
- gdb_connection_t *gdb_con = connection->priv;
- gdb_con->frontend_state = TARGET_RUNNING;
- log_setCallback(gdb_log_callback, connection);
- gdb_step_continue_packet(connection, target, packet, packet_size);
- }
- break;
- case 'v':
- retval = gdb_v_packet(connection, target, packet, packet_size);
- break;
- case 'D':
- retval = gdb_detach(connection, target);
- extended_protocol = 0;
- break;
- case 'X':
- if ((retval = gdb_write_memory_binary_packet(connection, target, packet, packet_size)) != ERROR_OK)
- return retval;
- break;
- case 'k':
- if (extended_protocol != 0)
- break;
- gdb_put_packet(connection, "OK", 2);
- return ERROR_SERVER_REMOTE_CLOSED;
- case '!':
- /* handle extended remote protocol */
- extended_protocol = 1;
- gdb_put_packet(connection, "OK", 2);
- break;
- case 'R':
- /* handle extended restart packet */
- target_process_reset(connection->cmd_ctx);
- break;
- default:
- /* ignore unkown packets */
- DEBUG("ignoring 0x%2.2x packet", packet[0]);
- gdb_put_packet(connection, NULL, 0);
- break;
- }
-
- /* if a packet handler returned an error, exit input loop */
- if (retval != ERROR_OK)
- return retval;
- }
-
- if (gdb_con->ctrl_c)
- {
- if (target->state == TARGET_RUNNING)
- {
- target->type->halt(target);
- gdb_con->ctrl_c = 0;
- }
- }
-
- } while (gdb_con->buf_cnt > 0);
-
- return ERROR_OK;
-}
-
-int gdb_input(connection_t *connection)
-{
- int retval = gdb_input_inner(connection);
- if (retval == ERROR_SERVER_REMOTE_CLOSED)
- return retval;
- /* we'll recover from any other errors(e.g. temporary timeouts, etc.) */
- return ERROR_OK;
-}
-
-int gdb_init()
-{
- gdb_service_t *gdb_service;
- target_t *target = targets;
- int i = 0;
-
- if (!target)
- {
- WARNING("no gdb ports allocated as no target has been specified");
- return ERROR_OK;
- }
-
- if (gdb_port == 0)
- {
- WARNING("no gdb port specified, using default port 3333");
- gdb_port = 3333;
- }
-
- while (target)
- {
- char service_name[8];
-
- snprintf(service_name, 8, "gdb-%2.2i", i);
-
- gdb_service = malloc(sizeof(gdb_service_t));
- gdb_service->target = target;
-
- add_service("gdb", CONNECTION_GDB, gdb_port + i, 1, gdb_new_connection, gdb_input, gdb_connection_closed, gdb_service);
-
- DEBUG("gdb service for target %s at port %i", target->type->name, gdb_port + i);
-
- i++;
- target = target->next;
- }
-
- return ERROR_OK;
-}
-
-/* daemon configuration command gdb_port */
-int handle_gdb_port_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- if (argc == 0)
- return ERROR_OK;
-
- /* only if the port wasn't overwritten by cmdline */
- if (gdb_port == 0)
- gdb_port = strtoul(args[0], NULL, 0);
-
- return ERROR_OK;
-}
-
-int handle_gdb_detach_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- if (argc == 1)
- {
- if (strcmp(args[0], "resume") == 0)
- {
- detach_mode = GDB_DETACH_RESUME;
- return ERROR_OK;
- }
- else if (strcmp(args[0], "reset") == 0)
- {
- detach_mode = GDB_DETACH_RESET;
- return ERROR_OK;
- }
- else if (strcmp(args[0], "halt") == 0)
- {
- detach_mode = GDB_DETACH_HALT;
- return ERROR_OK;
- }
- else if (strcmp(args[0], "nothing") == 0)
- {
- detach_mode = GDB_DETACH_NOTHING;
- return ERROR_OK;
- }
- }
-
- WARNING("invalid gdb_detach configuration directive: %s", args[0]);
- return ERROR_OK;
-}
-
-int handle_gdb_memory_map_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- if (argc == 1)
- {
- if (strcmp(args[0], "enable") == 0)
- {
- gdb_use_memory_map = 1;
- return ERROR_OK;
- }
- else if (strcmp(args[0], "disable") == 0)
- {
- gdb_use_memory_map = 0;
- return ERROR_OK;
- }
- }
-
- WARNING("invalid gdb_memory_map configuration directive: %s", args[0]);
- return ERROR_OK;
-}
-
-int handle_gdb_flash_program_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- if (argc == 1)
- {
- if (strcmp(args[0], "enable") == 0)
- {
- gdb_flash_program = 1;
- return ERROR_OK;
- }
- else if (strcmp(args[0], "disable") == 0)
- {
- gdb_flash_program = 0;
- return ERROR_OK;
- }
- }
-
- WARNING("invalid gdb_memory_map configuration directive: %s", args[0]);
- return ERROR_OK;
-}
-
-int handle_gdb_report_data_abort_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- if (argc == 1)
- {
- if (strcmp(args[0], "enable") == 0)
- {
- gdb_report_data_abort = 1;
- return ERROR_OK;
- }
- else if (strcmp(args[0], "disable") == 0)
- {
- gdb_report_data_abort = 0;
- return ERROR_OK;
- }
- }
-
- WARNING("invalid gdb_report_data_abort configuration directive: %s", args[0]);
- return ERROR_OK;
-}
-
-int gdb_register_commands(command_context_t *command_context)
-{
- register_command(command_context, NULL, "gdb_port", handle_gdb_port_command,
- COMMAND_CONFIG, "");
- register_command(command_context, NULL, "gdb_detach", handle_gdb_detach_command,
- COMMAND_CONFIG, "");
- register_command(command_context, NULL, "gdb_memory_map", handle_gdb_memory_map_command,
- COMMAND_CONFIG, "");
- register_command(command_context, NULL, "gdb_flash_program", handle_gdb_flash_program_command,
- COMMAND_CONFIG, "");
- register_command(command_context, NULL, "gdb_report_data_abort", handle_gdb_report_data_abort_command,
- COMMAND_CONFIG, "");
- return ERROR_OK;
-}
+/***************************************************************************
+ * Copyright (C) 2005 by Dominic Rath *
+ * Dominic.Rath@gmx.de *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "replacements.h"
+
+#include "gdb_server.h"
+
+#include "server.h"
+#include "log.h"
+#include "binarybuffer.h"
+#include "jtag.h"
+#include "breakpoints.h"
+#include "flash.h"
+#include "target_request.h"
+#include "configuration.h"
+
+#include <string.h>
+#include <errno.h>
+#include <unistd.h>
+#include <stdlib.h>
+
+#if 0
+#define _DEBUG_GDB_IO_
+#endif
+
+static unsigned short gdb_port;
+static const char *DIGITS = "0123456789abcdef";
+
+static void gdb_log_callback(void *priv, const char *file, int line,
+ const char *function, const char *format, va_list args);
+
+enum gdb_detach_mode
+{
+ GDB_DETACH_RESUME,
+ GDB_DETACH_RESET,
+ GDB_DETACH_HALT,
+ GDB_DETACH_NOTHING
+};
+
+/* target behaviour on gdb detach */
+enum gdb_detach_mode detach_mode = GDB_DETACH_RESUME;
+
+/* set if we are sending a memory map to gdb
+ * via qXfer:memory-map:read packet */
+int gdb_use_memory_map = 0;
+int gdb_flash_program = 0;
+
+/* if set, data aborts cause an error to be reported in memory read packets
+ * see the code in gdb_read_memory_packet() for further explanations */
+int gdb_report_data_abort = 0;
+
+int gdb_last_signal(target_t *target)
+{
+ switch (target->debug_reason)
+ {
+ case DBG_REASON_DBGRQ:
+ return 0x2; /* SIGINT */
+ case DBG_REASON_BREAKPOINT:
+ case DBG_REASON_WATCHPOINT:
+ case DBG_REASON_WPTANDBKPT:
+ return 0x05; /* SIGTRAP */
+ case DBG_REASON_SINGLESTEP:
+ return 0x05; /* SIGTRAP */
+ case DBG_REASON_NOTHALTED:
+ return 0x0; /* no signal... shouldn't happen */
+ default:
+ ERROR("BUG: undefined debug reason");
+ exit(-1);
+ }
+}
+
+int gdb_get_char(connection_t *connection, int* next_char)
+{
+ gdb_connection_t *gdb_con = connection->priv;
+
+#ifdef _DEBUG_GDB_IO_
+ char *debug_buffer;
+#endif
+
+ if (gdb_con->buf_cnt-- > 0)
+ {
+ *next_char = *(gdb_con->buf_p++);
+ if (gdb_con->buf_cnt > 0)
+ connection->input_pending = 1;
+ else
+ connection->input_pending = 0;
+
+#ifdef _DEBUG_GDB_IO_
+ DEBUG("returned char '%c' (0x%2.2x)", *next_char, *next_char);
+#endif
+
+ return ERROR_OK;
+ }
+
+ for (;;)
+ {
+#ifndef _WIN32
+ /* a non-blocking socket will block if there is 0 bytes available on the socket,
+ * but return with as many bytes as are available immediately
+ */
+ struct timeval tv;
+ fd_set read_fds;
+
+ FD_ZERO(&read_fds);
+ FD_SET(connection->fd, &read_fds);
+
+ tv.tv_sec = 1;
+ tv.tv_usec = 0;
+ if (select(connection->fd + 1, &read_fds, NULL, NULL, &tv) == 0)
+ {
+ /* This can typically be because a "monitor" command took too long
+ * before printing any progress messages
+ */
+ return ERROR_GDB_TIMEOUT;
+ }
+#endif
+ gdb_con->buf_cnt = read_socket(connection->fd, gdb_con->buffer, GDB_BUFFER_SIZE);
+ if (gdb_con->buf_cnt > 0)
+ {
+ break;
+ }
+ if (gdb_con->buf_cnt == 0)
+ {
+ gdb_con->closed = 1;
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+
+#ifdef _WIN32
+ errno = WSAGetLastError();
+
+ switch(errno)
+ {
+ case WSAEWOULDBLOCK:
+ usleep(1000);
+ break;
+ case WSAECONNABORTED:
+ return ERROR_SERVER_REMOTE_CLOSED;
+ case WSAECONNRESET:
+ return ERROR_SERVER_REMOTE_CLOSED;
+ default:
+ ERROR("read: %d", errno);
+ exit(-1);
+ }
+#else
+ switch(errno)
+ {
+ case EAGAIN:
+ usleep(1000);
+ break;
+ case ECONNABORTED:
+ return ERROR_SERVER_REMOTE_CLOSED;
+ case ECONNRESET:
+ return ERROR_SERVER_REMOTE_CLOSED;
+ default:
+ ERROR("read: %s", strerror(errno));
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+#endif
+ }
+
+#ifdef _DEBUG_GDB_IO_
+ debug_buffer = malloc(gdb_con->buf_cnt + 1);
+ memcpy(debug_buffer, gdb_con->buffer, gdb_con->buf_cnt);
+ debug_buffer[gdb_con->buf_cnt] = 0;
+ DEBUG("received '%s'", debug_buffer);
+ free(debug_buffer);
+#endif
+
+ gdb_con->buf_p = gdb_con->buffer;
+ gdb_con->buf_cnt--;
+ *next_char = *(gdb_con->buf_p++);
+ if (gdb_con->buf_cnt > 0)
+ connection->input_pending = 1;
+ else
+ connection->input_pending = 0;
+#ifdef _DEBUG_GDB_IO_
+ DEBUG("returned char '%c' (0x%2.2x)", *next_char, *next_char);
+#endif
+
+ return ERROR_OK;
+}
+
+int gdb_putback_char(connection_t *connection, int last_char)
+{
+ gdb_connection_t *gdb_con = connection->priv;
+
+ if (gdb_con->buf_p > gdb_con->buffer)
+ {
+ *(--gdb_con->buf_p) = last_char;
+ gdb_con->buf_cnt++;
+ }
+ else
+ {
+ ERROR("BUG: couldn't put character back");
+ }
+
+ return ERROR_OK;
+}
+
+/* The only way we can detect that the socket is closed is the first time
+ * we write to it, we will fail. Subsequent write operations will
+ * succeed. Shudder! */
+int gdb_write(connection_t *connection, void *data, int len)
+{
+ gdb_connection_t *gdb_con = connection->priv;
+ if (gdb_con->closed)
+ return ERROR_SERVER_REMOTE_CLOSED;
+
+ if (write_socket(connection->fd, data, len) == len)
+ {
+ return ERROR_OK;
+ }
+ gdb_con->closed = 1;
+ return ERROR_SERVER_REMOTE_CLOSED;
+}
+
+int gdb_put_packet_inner(connection_t *connection, char *buffer, int len)
+{
+ int i;
+ unsigned char my_checksum = 0;
+#ifdef _DEBUG_GDB_IO_
+ char *debug_buffer;
+#endif
+ int reply;
+ int retval;
+ gdb_connection_t *gdb_con = connection->priv;
+
+ for (i = 0; i < len; i++)
+ my_checksum += buffer[i];
+
+ while (1)
+ {
+#ifdef _DEBUG_GDB_IO_
+ debug_buffer = malloc(len + 1);
+ memcpy(debug_buffer, buffer, len);
+ debug_buffer[len] = 0;
+ DEBUG("sending packet '$%s#%2.2x'", debug_buffer, my_checksum);
+ free(debug_buffer);
+#endif
+#if 0
+ char checksum[3];
+ gdb_write(connection, "$", 1);
+ if (len > 0)
+ gdb_write(connection, buffer, len);
+ gdb_write(connection, "#", 1);
+
+ snprintf(checksum, 3, "%2.2x", my_checksum);
+
+ gdb_write(connection, checksum, 2);
+#else
+ void *allocated = NULL;
+ char stackAlloc[1024];
+ char *t = stackAlloc;
+ int totalLen = 1 + len + 1 + 2;
+ if (totalLen > sizeof(stackAlloc))
+ {
+ allocated = malloc(totalLen);
+ t = allocated;
+ if (allocated == NULL)
+ {
+ ERROR("Ran out of memory trying to reply packet %d\n", totalLen);
+ exit(-1);
+ }
+ }
+ t[0] = '$';
+ memcpy(t + 1, buffer, len);
+ t[1 + len] = '#';
+ t[1 + len + 1] = DIGITS[(my_checksum >> 4) & 0xf];
+ t[1 + len + 2] = DIGITS[my_checksum & 0xf];
+
+ gdb_write(connection, t, totalLen);
+
+ if (allocated)
+ {
+ free(allocated);
+ }
+#endif
+ if ((retval = gdb_get_char(connection, &reply)) != ERROR_OK)
+ return retval;
+
+ if (reply == '+')
+ break;
+ else if (reply == '-')
+ {
+ /* Stop sending output packets for now */
+ log_setCallback(NULL, NULL);
+ WARNING("negative reply, retrying");
+ }
+ else if (reply == 0x3)
+ {
+ gdb_con->ctrl_c = 1;
+ if ((retval = gdb_get_char(connection, &reply)) != ERROR_OK)
+ return retval;
+ if (reply == '+')
+ break;
+ else if (reply == '-')
+ {
+ /* Stop sending output packets for now */
+ log_setCallback(NULL, NULL);
+ WARNING("negative reply, retrying");
+ }
+ else
+ {
+ ERROR("unknown character 0x%2.2x in reply, dropping connection", reply);
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+ }
+ else
+ {
+ ERROR("unknown character 0x%2.2x in reply, dropping connection", reply);
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+ }
+ if (gdb_con->closed)
+ return ERROR_SERVER_REMOTE_CLOSED;
+
+ return ERROR_OK;
+}
+
+int gdb_put_packet(connection_t *connection, char *buffer, int len)
+{
+ gdb_connection_t *gdb_con = connection->priv;
+ gdb_con->busy = 1;
+ int retval = gdb_put_packet_inner(connection, buffer, len);
+ gdb_con->busy = 0;
+ return retval;
+}
+
+int gdb_get_packet_inner(connection_t *connection, char *buffer, int *len)
+{
+ int character;
+ int count = 0;
+ int retval;
+ char checksum[3];
+ unsigned char my_checksum = 0;
+ gdb_connection_t *gdb_con = connection->priv;
+
+ while (1)
+ {
+ do
+ {
+ if ((retval = gdb_get_char(connection, &character)) != ERROR_OK)
+ return retval;
+
+#ifdef _DEBUG_GDB_IO_
+ DEBUG("character: '%c'", character);
+#endif
+
+ switch (character)
+ {
+ case '$':
+ break;
+ case '+':
+ WARNING("acknowledgment received, but no packet pending");
+ break;
+ case '-':
+ WARNING("negative acknowledgment, but no packet pending");
+ break;
+ case 0x3:
+ gdb_con->ctrl_c = 1;
+ *len = 0;
+ return ERROR_OK;
+ default:
+ WARNING("ignoring character 0x%x", character);
+ break;
+ }
+ } while (character != '$');
+
+ my_checksum = 0;
+
+ count = 0;
+ gdb_connection_t *gdb_con = connection->priv;
+ for (;;)
+ {
+ /* The common case is that we have an entire packet with no escape chars.
+ * We need to leave at least 2 bytes in the buffer to have
+ * gdb_get_char() update various bits and bobs correctly.
+ */
+ if ((gdb_con->buf_cnt > 2) && ((gdb_con->buf_cnt+count) < *len))
+ {
+ /* The compiler will struggle a bit with constant propagation and
+ * aliasing, so we help it by showing that these values do not
+ * change inside the loop
+ */
+ int i;
+ char *buf = gdb_con->buf_p;
+ int run = gdb_con->buf_cnt - 2;
+ i = 0;
+ int done = 0;
+ while (i < run)
+ {
+ character = *buf++;
+ i++;
+ if (character == '#')
+ {
+ /* Danger! character can be '#' when esc is
+ * used so we need an explicit boolean for done here.
+ */
+ done = 1;
+ break;
+ }
+
+ if (character == '}')
+ {
+ /* data transmitted in binary mode (X packet)
+ * uses 0x7d as escape character */
+ my_checksum += character & 0xff;
+ character = *buf++;
+ i++;
+ my_checksum += character & 0xff;
+ buffer[count++] = (character ^ 0x20) & 0xff;
+ } else
+ {
+ my_checksum += character & 0xff;
+ buffer[count++] = character & 0xff;
+ }
+ }
+ gdb_con->buf_p += i;
+ gdb_con->buf_cnt -= i;
+ if (done)
+ break;
+ }
+ if (count > *len)
+ {
+ ERROR("packet buffer too small");
+ return ERROR_GDB_BUFFER_TOO_SMALL;
+ }
+
+ if ((retval = gdb_get_char(connection, &character)) != ERROR_OK)
+ return retval;
+
+ if (character == '#')
+ break;
+
+ if (character == '}')
+ {
+ /* data transmitted in binary mode (X packet)
+ * uses 0x7d as escape character */
+ my_checksum += character & 0xff;
+ if ((retval = gdb_get_char(connection, &character)) != ERROR_OK)
+ return retval;
+ my_checksum += character & 0xff;
+ buffer[count++] = (character ^ 0x20) & 0xff;
+ }
+ else
+ {
+ my_checksum += character & 0xff;
+ buffer[count++] = character & 0xff;
+ }
+
+ }
+
+ *len = count;
+
+ if ((retval = gdb_get_char(connection, &character)) != ERROR_OK)
+ return retval;
+ checksum[0] = character;
+ if ((retval = gdb_get_char(connection, &character)) != ERROR_OK)
+ return retval;
+ checksum[1] = character;
+ checksum[2] = 0;
+
+ if (my_checksum == strtoul(checksum, NULL, 16))
+ {
+ gdb_write(connection, "+", 1);
+ break;
+ }
+
+ WARNING("checksum error, requesting retransmission");
+ gdb_write(connection, "-", 1);
+ }
+ if (gdb_con->closed)
+ return ERROR_SERVER_REMOTE_CLOSED;
+
+ return ERROR_OK;
+}
+
+int gdb_get_packet(connection_t *connection, char *buffer, int *len)
+{
+ gdb_connection_t *gdb_con = connection->priv;
+ gdb_con->busy = 1;
+ int retval = gdb_get_packet_inner(connection, buffer, len);
+ gdb_con->busy = 0;
+ return retval;
+}
+
+int gdb_output_con(connection_t *connection, char* line)
+{
+ char *hex_buffer;
+ int i, bin_size;
+
+ bin_size = strlen(line);
+
+ hex_buffer = malloc(bin_size*2 + 4);
+
+ hex_buffer[0] = 'O';
+ for (i=0; i<bin_size; i++)
+ snprintf(hex_buffer + 1 + i*2, 3, "%2.2x", line[i]);
+ hex_buffer[bin_size*2+1] = '0';
+ hex_buffer[bin_size*2+2] = 'a';
+ hex_buffer[bin_size*2+3] = 0x0;
+
+ gdb_put_packet(connection, hex_buffer, bin_size*2 + 3);
+
+ free(hex_buffer);
+ return ERROR_OK;
+}
+
+int gdb_output(struct command_context_s *context, char* line)
+{
+ /* this will be dumped to the log and also sent as an O packet if possible */
+ USER(line);
+ return ERROR_OK;
+}
+
+int gdb_program_handler(struct target_s *target, enum target_event event, void *priv)
+{
+ FILE *script;
+ struct command_context_s *cmd_ctx = priv;
+
+ if (target->gdb_program_script)
+ {
+ script = open_file_from_path(cmd_ctx, target->gdb_program_script, "r");
+ if (!script)
+ {
+ ERROR("couldn't open script file %s", target->gdb_program_script);
+ return ERROR_OK;
+ }
+
+ INFO("executing gdb_program script '%s'", target->gdb_program_script);
+ command_run_file(cmd_ctx, script, COMMAND_EXEC);
+ fclose(script);
+
+ jtag_execute_queue();
+ }
+
+ return ERROR_OK;
+}
+
+int gdb_target_callback_event_handler(struct target_s *target, enum target_event event, void *priv)
+{
+ connection_t *connection = priv;
+ gdb_connection_t *gdb_connection = connection->priv;
+ char sig_reply[4];
+ int signal;
+
+ switch (event)
+ {
+ case TARGET_EVENT_HALTED:
+ /* In the GDB protocol when we are stepping or coninuing execution,
+ * we have a lingering reply. Upon receiving a halted event
+ * when we have that lingering packet, we reply to the original
+ * step or continue packet.
+ *
+ * Executing monitor commands can bring the target in and
+ * out of the running state so we'll see lots of TARGET_EVENT_XXX
+ * that are to be ignored.
+ */
+ if (gdb_connection->frontend_state == TARGET_RUNNING)
+ {
+ /* stop forwarding log packets! */
+ log_setCallback(NULL, NULL);
+
+ if (gdb_connection->ctrl_c)
+ {
+ signal = 0x2;
+ gdb_connection->ctrl_c = 0;
+ }
+ else
+ {
+ signal = gdb_last_signal(target);
+ }
+
+ snprintf(sig_reply, 4, "T%2.2x", signal);
+ gdb_put_packet(connection, sig_reply, 3);
+ gdb_connection->frontend_state = TARGET_HALTED;
+ }
+ break;
+ case TARGET_EVENT_GDB_PROGRAM:
+ gdb_program_handler(target, event, connection->cmd_ctx);
+ break;
+ default:
+ break;
+ }
+
+ return ERROR_OK;
+}
+
+int gdb_new_connection(connection_t *connection)
+{
+ gdb_connection_t *gdb_connection = malloc(sizeof(gdb_connection_t));
+ gdb_service_t *gdb_service = connection->service->priv;
+ int retval;
+ int initial_ack;
+
+ connection->priv = gdb_connection;
+
+ /* initialize gdb connection information */
+ gdb_connection->buf_p = gdb_connection->buffer;
+ gdb_connection->buf_cnt = 0;
+ gdb_connection->ctrl_c = 0;
+ gdb_connection->frontend_state = TARGET_HALTED;
+ gdb_connection->vflash_image = NULL;
+ gdb_connection->closed = 0;
+ gdb_connection->busy = 0;
+
+ /* output goes through gdb connection */
+ command_set_output_handler(connection->cmd_ctx, gdb_output, connection);
+
+ /* register callback to be informed about target events */
+ target_register_event_callback(gdb_target_callback_event_handler, connection);
+
+ /* a gdb session just attached, put the target in halt mode */
+ if (((retval = gdb_service->target->type->halt(gdb_service->target)) != ERROR_OK) &&
+ (retval != ERROR_TARGET_ALREADY_HALTED))
+ {
+ ERROR("error(%d) when trying to halt target, falling back to \"reset halt\"", retval);
+ command_run_line(connection->cmd_ctx, "reset halt");
+ }
+
+ /* This will time out after 1 second */
+ command_run_line(connection->cmd_ctx, "wait_halt 1");
+
+ /* remove the initial ACK from the incoming buffer */
+ if ((retval = gdb_get_char(connection, &initial_ack)) != ERROR_OK)
+ return retval;
+
+ if (initial_ack != '+')
+ gdb_putback_char(connection, initial_ack);
+
+ return ERROR_OK;
+}
+
+int gdb_connection_closed(connection_t *connection)
+{
+ gdb_service_t *gdb_service = connection->service->priv;
+ gdb_connection_t *gdb_connection = connection->priv;
+
+ /* see if an image built with vFlash commands is left */
+ if (gdb_connection->vflash_image)
+ {
+ image_close(gdb_connection->vflash_image);
+ free(gdb_connection->vflash_image);
+ gdb_connection->vflash_image = NULL;
+ }
+
+ /* if this connection registered a debug-message receiver delete it */
+ delete_debug_msg_receiver(connection->cmd_ctx, gdb_service->target);
+
+ if (connection->priv)
+ {
+ free(connection->priv);
+ connection->priv = NULL;
+ }
+ else
+ {
+ ERROR("BUG: connection->priv == NULL");
+ }
+
+ target_unregister_event_callback(gdb_target_callback_event_handler, connection);
+ log_setCallback(NULL, NULL);
+
+ return ERROR_OK;
+}
+
+void gdb_send_error(connection_t *connection, u8 the_error)
+{
+ char err[4];
+ snprintf(err, 4, "E%2.2X", the_error );
+ gdb_put_packet(connection, err, 3);
+}
+
+int gdb_last_signal_packet(connection_t *connection, target_t *target, char* packet, int packet_size)
+{
+ char sig_reply[4];
+ int signal;
+
+ signal = gdb_last_signal(target);
+
+ snprintf(sig_reply, 4, "S%2.2x", signal);
+ gdb_put_packet(connection, sig_reply, 3);
+
+ return ERROR_OK;
+}
+
+/* Convert register to string of bits. NB! The # of bits in the
+ * register might be non-divisible by 8(a byte), in which
+ * case an entire byte is shown. */
+void gdb_str_to_target(target_t *target, char *tstr, reg_t *reg)
+{
+ int i;
+
+ u8 *buf;
+ int buf_len;
+ buf = reg->value;
+ buf_len = CEIL(reg->size, 8);
+
+ if (target->endianness == TARGET_LITTLE_ENDIAN)
+ {
+ for (i = 0; i < buf_len; i++)
+ {
+ tstr[i*2] = DIGITS[(buf[i]>>4) & 0xf];
+ tstr[i*2+1] = DIGITS[buf[i]&0xf];
+ }
+ }
+ else
+ {
+ for (i = 0; i < buf_len; i++)
+ {
+ tstr[(buf_len-1-i)*2] = DIGITS[(buf[i]>>4)&0xf];
+ tstr[(buf_len-1-i)*2+1] = DIGITS[buf[i]&0xf];
+ }
+ }
+}
+
+void gdb_target_to_str(target_t *target, char *tstr, char *str)
+{
+ int str_len = strlen(tstr);
+ int i;
+
+ if (str_len % 2)
+ {
+ ERROR("BUG: gdb value with uneven number of characters encountered");
+ exit(-1);
+ }
+
+ if (target->endianness == TARGET_LITTLE_ENDIAN)
+ {
+ for (i = 0; i < str_len; i+=2)
+ {
+ str[str_len - i - 1] = tstr[i + 1];
+ str[str_len - i - 2] = tstr[i];
+ }
+ }
+ else
+ {
+ for (i = 0; i < str_len; i++)
+ {
+ str[i] = tstr[i];
+ }
+ }
+}
+
+int gdb_get_registers_packet(connection_t *connection, target_t *target, char* packet, int packet_size)
+{
+ reg_t **reg_list;
+ int reg_list_size;
+ int retval;
+ int reg_packet_size = 0;
+ char *reg_packet;
+ char *reg_packet_p;
+ int i;
+
+#ifdef _DEBUG_GDB_IO_
+ DEBUG("-");
+#endif
+
+ if ((retval = target->type->get_gdb_reg_list(target, &reg_list, &reg_list_size)) != ERROR_OK)
+ {
+ switch (retval)
+ {
+ case ERROR_TARGET_NOT_HALTED:
+ ERROR("gdb requested registers but we're not halted, dropping connection");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ default:
+ /* this is a bug condition - get_gdb_reg_list() may not return any other error */
+ ERROR("BUG: unexpected error returned by get_gdb_reg_list()");
+ exit(-1);
+ }
+ }
+
+ for (i = 0; i < reg_list_size; i++)
+ {
+ reg_packet_size += reg_list[i]->size;
+ }
+
+ reg_packet = malloc(CEIL(reg_packet_size, 8) * 2);
+ reg_packet_p = reg_packet;
+
+ for (i = 0; i < reg_list_size; i++)
+ {
+ gdb_str_to_target(target, reg_packet_p, reg_list[i]);
+ reg_packet_p += CEIL(reg_list[i]->size, 8) * 2;
+ }
+
+#ifdef _DEBUG_GDB_IO_
+ {
+ char *reg_packet_p;
+ reg_packet_p = strndup(reg_packet, CEIL(reg_packet_size, 8) * 2);
+ DEBUG("reg_packet: %s", reg_packet_p);
+ free(reg_packet_p);
+ }
+#endif
+
+ gdb_put_packet(connection, reg_packet, CEIL(reg_packet_size, 8) * 2);
+ free(reg_packet);
+
+ free(reg_list);
+
+ return ERROR_OK;
+}
+
+int gdb_set_registers_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
+{
+ int i;
+ reg_t **reg_list;
+ int reg_list_size;
+ int retval;
+ char *packet_p;
+
+#ifdef _DEBUG_GDB_IO_
+ DEBUG("-");
+#endif
+
+ /* skip command character */
+ packet++;
+ packet_size--;
+
+ if (packet_size % 2)
+ {
+ WARNING("GDB set_registers packet with uneven characters received, dropping connection");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+
+ if ((retval = target->type->get_gdb_reg_list(target, &reg_list, &reg_list_size)) != ERROR_OK)
+ {
+ switch (retval)
+ {
+ case ERROR_TARGET_NOT_HALTED:
+ ERROR("gdb tried to registers but we're not halted, dropping connection");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ default:
+ /* this is a bug condition - get_gdb_reg_list() may not return any other error */
+ ERROR("BUG: unexpected error returned by get_gdb_reg_list()");
+ exit(-1);
+ }
+ }
+
+ packet_p = packet;
+ for (i = 0; i < reg_list_size; i++)
+ {
+ u8 *bin_buf;
+ char *hex_buf;
+ reg_arch_type_t *arch_type;
+
+ /* convert from GDB-string (target-endian) to hex-string (big-endian) */
+ hex_buf = malloc(CEIL(reg_list[i]->size, 8) * 2);
+ gdb_target_to_str(target, packet_p, hex_buf);
+
+ /* convert hex-string to binary buffer */
+ bin_buf = malloc(CEIL(reg_list[i]->size, 8));
+ str_to_buf(hex_buf, CEIL(reg_list[i]->size, 8) * 2, bin_buf, reg_list[i]->size, 16);
+
+ /* get register arch_type, and call set method */
+ arch_type = register_get_arch_type(reg_list[i]->arch_type);
+ if (arch_type == NULL)
+ {
+ ERROR("BUG: encountered unregistered arch type");
+ exit(-1);
+ }
+ arch_type->set(reg_list[i], bin_buf);
+
+ /* advance packet pointer */
+ packet_p += (CEIL(reg_list[i]->size, 8) * 2);
+
+ free(bin_buf);
+ free(hex_buf);
+ }
+
+ /* free reg_t *reg_list[] array allocated by get_gdb_reg_list */
+ free(reg_list);
+
+ gdb_put_packet(connection, "OK", 2);
+
+ return ERROR_OK;
+}
+
+int gdb_get_register_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
+{
+ char *reg_packet;
+ int reg_num = strtoul(packet + 1, NULL, 16);
+ reg_t **reg_list;
+ int reg_list_size;
+ int retval;
+
+#ifdef _DEBUG_GDB_IO_
+ DEBUG("-");
+#endif
+
+ if ((retval = target->type->get_gdb_reg_list(target, &reg_list, &reg_list_size)) != ERROR_OK)
+ {
+ switch (retval)
+ {
+ case ERROR_TARGET_NOT_HALTED:
+ ERROR("gdb requested registers but we're not halted, dropping connection");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ default:
+ /* this is a bug condition - get_gdb_reg_list() may not return any other error */
+ ERROR("BUG: unexpected error returned by get_gdb_reg_list()");
+ exit(-1);
+ }
+ }
+
+ if (reg_list_size <= reg_num)
+ {
+ ERROR("gdb requested a non-existing register");
+ exit(-1);
+ }
+
+ reg_packet = malloc(CEIL(reg_list[reg_num]->size, 8) * 2);
+
+ gdb_str_to_target(target, reg_packet, reg_list[reg_num]);
+
+ gdb_put_packet(connection, reg_packet, CEIL(reg_list[reg_num]->size, 8) * 2);
+
+ free(reg_list);
+ free(reg_packet);
+
+ return ERROR_OK;
+}
+
+int gdb_set_register_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
+{
+ char *separator;
+ char *hex_buf;
+ u8 *bin_buf;
+ int reg_num = strtoul(packet + 1, &separator, 16);
+ reg_t **reg_list;
+ int reg_list_size;
+ int retval;
+ reg_arch_type_t *arch_type;
+
+ DEBUG("-");
+
+ if ((retval = target->type->get_gdb_reg_list(target, &reg_list, &reg_list_size)) != ERROR_OK)
+ {
+ switch (retval)
+ {
+ case ERROR_TARGET_NOT_HALTED:
+ ERROR("gdb tried to set a register but we're not halted, dropping connection");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ default:
+ /* this is a bug condition - get_gdb_reg_list() may not return any other error */
+ ERROR("BUG: unexpected error returned by get_gdb_reg_list()");
+ exit(-1);
+ }
+ }
+
+ if (reg_list_size < reg_num)
+ {
+ ERROR("gdb requested a non-existing register");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+
+ if (*separator != '=')
+ {
+ ERROR("GDB 'set register packet', but no '=' following the register number");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+
+ /* convert from GDB-string (target-endian) to hex-string (big-endian) */
+ hex_buf = malloc(CEIL(reg_list[reg_num]->size, 8) * 2);
+ gdb_target_to_str(target, separator + 1, hex_buf);
+
+ /* convert hex-string to binary buffer */
+ bin_buf = malloc(CEIL(reg_list[reg_num]->size, 8));
+ str_to_buf(hex_buf, CEIL(reg_list[reg_num]->size, 8) * 2, bin_buf, reg_list[reg_num]->size, 16);
+
+ /* get register arch_type, and call set method */
+ arch_type = register_get_arch_type(reg_list[reg_num]->arch_type);
+ if (arch_type == NULL)
+ {
+ ERROR("BUG: encountered unregistered arch type");
+ exit(-1);
+ }
+ arch_type->set(reg_list[reg_num], bin_buf);
+
+ gdb_put_packet(connection, "OK", 2);
+
+ free(bin_buf);
+ free(hex_buf);
+ free(reg_list);
+
+ return ERROR_OK;
+}
+
+int gdb_memory_packet_error(connection_t *connection, int retval)
+{
+ switch (retval)
+ {
+ case ERROR_TARGET_NOT_HALTED:
+ ERROR("gdb tried to read memory but we're not halted, dropping connection");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ case ERROR_TARGET_DATA_ABORT:
+ gdb_send_error(connection, EIO);
+ break;
+ case ERROR_TARGET_TRANSLATION_FAULT:
+ gdb_send_error(connection, EFAULT);
+ break;
+ case ERROR_TARGET_UNALIGNED_ACCESS:
+ gdb_send_error(connection, EFAULT);
+ break;
+ default:
+ /* This could be that the target reset itself. */
+ ERROR("unexpected error %i. Dropping connection.", retval);
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+
+ return ERROR_OK;
+}
+
+/* We don't have to worry about the default 2 second timeout for GDB packets,
+ * because GDB breaks up large memory reads into smaller reads.
+ *
+ * 8191 bytes by the looks of it. Why 8191 bytes instead of 8192?????
+ */
+int gdb_read_memory_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
+{
+ char *separator;
+ u32 addr = 0;
+ u32 len = 0;
+
+ u8 *buffer;
+ char *hex_buffer;
+
+ int retval = ERROR_OK;
+
+ /* skip command character */
+ packet++;
+
+ addr = strtoul(packet, &separator, 16);
+
+ if (*separator != ',')
+ {
+ ERROR("incomplete read memory packet received, dropping connection");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+
+ len = strtoul(separator+1, NULL, 16);
+
+ buffer = malloc(len);
+
+ DEBUG("addr: 0x%8.8x, len: 0x%8.8x", addr, len);
+
+ retval = target_read_buffer(target, addr, len, buffer);
+
+ if ((retval == ERROR_TARGET_DATA_ABORT) && (!gdb_report_data_abort))
+ {
+ /* TODO : Here we have to lie and send back all zero's lest stack traces won't work.
+ * At some point this might be fixed in GDB, in which case this code can be removed.
+ *
+ * OpenOCD developers are acutely aware of this problem, but there is nothing
+ * gained by involving the user in this problem that hopefully will get resolved
+ * eventually
+ *
+ * http://sourceware.org/cgi-bin/gnatsweb.pl?cmd=view%20audit-trail&database=gdb&pr=2395
+ *
+ * For now, the default is to fix up things to make current GDB versions work.
+ * This can be overwritten using the gdb_report_data_abort <'enable'|'disable'> command.
+ */
+ memset(buffer, 0, len);
+ retval = ERROR_OK;
+ }
+
+ if (retval == ERROR_OK)
+ {
+ hex_buffer = malloc(len * 2 + 1);
+
+ int i;
+ for (i = 0; i < len; i++)
+ {
+ u8 t = buffer[i];
+ hex_buffer[2 * i] = DIGITS[(t >> 4) & 0xf];
+ hex_buffer[2 * i + 1] = DIGITS[t & 0xf];
+ }
+
+ gdb_put_packet(connection, hex_buffer, len * 2);
+
+ free(hex_buffer);
+ }
+ else
+ {
+ retval = gdb_memory_packet_error(connection, retval);
+ }
+
+ free(buffer);
+
+ return retval;
+}
+
+int gdb_write_memory_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
+{
+ char *separator;
+ u32 addr = 0;
+ u32 len = 0;
+
+ u8 *buffer;
+
+ int i;
+ int retval;
+
+ /* skip command character */
+ packet++;
+
+ addr = strtoul(packet, &separator, 16);
+
+ if (*separator != ',')
+ {
+ ERROR("incomplete write memory packet received, dropping connection");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+
+ len = strtoul(separator+1, &separator, 16);
+
+ if (*(separator++) != ':')
+ {
+ ERROR("incomplete write memory packet received, dropping connection");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+
+ buffer = malloc(len);
+
+ DEBUG("addr: 0x%8.8x, len: 0x%8.8x", addr, len);
+
+ for (i=0; i<len; i++)
+ {
+ u32 tmp;
+ sscanf(separator + 2*i, "%2x", &tmp);
+ buffer[i] = tmp;
+ }
+
+ retval = target_write_buffer(target, addr, len, buffer);
+
+ if (retval == ERROR_OK)
+ {
+ gdb_put_packet(connection, "OK", 2);
+ }
+ else
+ {
+ if ((retval = gdb_memory_packet_error(connection, retval)) != ERROR_OK)
+ return retval;
+ }
+
+ free(buffer);
+
+ return ERROR_OK;
+}
+
+int gdb_write_memory_binary_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
+{
+ char *separator;
+ u32 addr = 0;
+ u32 len = 0;
+
+ int retval;
+
+ /* skip command character */
+ packet++;
+
+ addr = strtoul(packet, &separator, 16);
+
+ if (*separator != ',')
+ {
+ ERROR("incomplete write memory binary packet received, dropping connection");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+
+ len = strtoul(separator+1, &separator, 16);
+
+ if (*(separator++) != ':')
+ {
+ ERROR("incomplete write memory binary packet received, dropping connection");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+
+ retval = ERROR_OK;
+ if (len)
+ {
+ DEBUG("addr: 0x%8.8x, len: 0x%8.8x", addr, len);
+
+ retval = target_write_buffer(target, addr, len, (u8*)separator);
+ }
+
+ if (retval == ERROR_OK)
+ {
+ gdb_put_packet(connection, "OK", 2);
+ }
+ else
+ {
+ if ((retval = gdb_memory_packet_error(connection, retval)) != ERROR_OK)
+ return retval;
+ }
+
+ return ERROR_OK;
+}
+
+void gdb_step_continue_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
+{
+ int current = 0;
+ u32 address = 0x0;
+
+ DEBUG("-");
+
+ if (packet_size > 1)
+ {
+ packet[packet_size] = 0;
+ address = strtoul(packet + 1, NULL, 16);
+ }
+ else
+ {
+ current = 1;
+ }
+
+ if (packet[0] == 'c')
+ {
+ DEBUG("continue");
+ target->type->resume(target, current, address, 0, 0); /* resume at current address, don't handle breakpoints, not debugging */
+ }
+ else if (packet[0] == 's')
+ {
+ DEBUG("step");
+ target->type->step(target, current, address, 0); /* step at current or address, don't handle breakpoints */
+ }
+}
+
+int gdb_bp_wp_packet_error(connection_t *connection, int retval)
+{
+ switch (retval)
+ {
+ case ERROR_TARGET_NOT_HALTED:
+ ERROR("gdb tried to set a breakpoint but we're not halted, dropping connection");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ break;
+ case ERROR_TARGET_RESOURCE_NOT_AVAILABLE:
+ gdb_send_error(connection, EBUSY);
+ break;
+ default:
+ ERROR("BUG: unexpected error %i", retval);
+ exit(-1);
+ }
+
+ return ERROR_OK;
+}
+
+int gdb_breakpoint_watchpoint_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
+{
+ int type;
+ enum breakpoint_type bp_type = BKPT_SOFT /* dummy init to avoid warning */;
+ enum watchpoint_rw wp_type;
+ u32 address;
+ u32 size;
+ char *separator;
+ int retval;
+
+ DEBUG("-");
+
+ type = strtoul(packet + 1, &separator, 16);
+
+ if (type == 0) /* memory breakpoint */
+ bp_type = BKPT_SOFT;
+ else if (type == 1) /* hardware breakpoint */
+ bp_type = BKPT_HARD;
+ else if (type == 2) /* write watchpoint */
+ wp_type = WPT_WRITE;
+ else if (type == 3) /* read watchpoint */
+ wp_type = WPT_READ;
+ else if (type == 4) /* access watchpoint */
+ wp_type = WPT_ACCESS;
+
+ if (*separator != ',')
+ {
+ ERROR("incomplete breakpoint/watchpoint packet received, dropping connection");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+
+ address = strtoul(separator+1, &separator, 16);
+
+ if (*separator != ',')
+ {
+ ERROR("incomplete breakpoint/watchpoint packet received, dropping connection");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+
+ size = strtoul(separator+1, &separator, 16);
+
+ switch (type)
+ {
+ case 0:
+ case 1:
+ if (packet[0] == 'Z')
+ {
+ if ((retval = breakpoint_add(target, address, size, bp_type)) != ERROR_OK)
+ {
+ if ((retval = gdb_bp_wp_packet_error(connection, retval)) != ERROR_OK)
+ return retval;
+ }
+ else
+ {
+ gdb_put_packet(connection, "OK", 2);
+ }
+ }
+ else
+ {
+ breakpoint_remove(target, address);
+ gdb_put_packet(connection, "OK", 2);
+ }
+ break;
+ case 2:
+ case 3:
+ case 4:
+ {
+ if (packet[0] == 'Z')
+ {
+ if ((retval = watchpoint_add(target, address, size, type-2, 0, 0xffffffffu)) != ERROR_OK)
+ {
+ if ((retval = gdb_bp_wp_packet_error(connection, retval)) != ERROR_OK)
+ return retval;
+ }
+ else
+ {
+ gdb_put_packet(connection, "OK", 2);
+ }
+ }
+ else
+ {
+ watchpoint_remove(target, address);
+ gdb_put_packet(connection, "OK", 2);
+ }
+ break;
+ }
+ default:
+ break;
+ }
+
+ return ERROR_OK;
+}
+
+/* print out a string and allocate more space as needed, mainly used for XML at this point */
+void xml_printf(int *retval, char **xml, int *pos, int *size, const char *fmt, ...)
+{
+ if (*retval != ERROR_OK)
+ {
+ return;
+ }
+ int first = 1;
+
+ for (;;)
+ {
+ if ((*xml == NULL) || (!first))
+ {
+ /* start by 0 to exercise all the code paths.
+ * Need minimum 2 bytes to fit 1 char and 0 terminator. */
+
+ *size = *size * 2 + 2;
+ char *t = *xml;
+ *xml = realloc(*xml, *size);
+ if (*xml == NULL)
+ {
+ if (t)
+ free(t);
+ *retval = ERROR_SERVER_REMOTE_CLOSED;
+ return;
+ }
+ }
+
+ va_list ap;
+ int ret;
+ va_start(ap, fmt);
+ ret = vsnprintf(*xml + *pos, *size - *pos, fmt, ap);
+ va_end(ap);
+ if ((ret > 0) && ((ret + 1) < *size - *pos))
+ {
+ *pos += ret;
+ return;
+ }
+ /* there was just enough or not enough space, allocate more. */
+ first = 0;
+ }
+}
+
+static int decode_xfer_read(char *buf, char **annex, int *ofs, unsigned int *len)
+{
+ char *separator;
+
+ /* Extract and NUL-terminate the annex. */
+ *annex = buf;
+ while (*buf && *buf != ':')
+ buf++;
+ if (*buf == '\0')
+ return -1;
+ *buf++ = 0;
+
+ /* After the read marker and annex, qXfer looks like a
+ * traditional 'm' packet. */
+
+ *ofs = strtoul(buf, &separator, 16);
+
+ if (*separator != ',')
+ return -1;
+
+ *len = strtoul(separator+1, NULL, 16);
+
+ return 0;
+}
+
+int gdb_calc_blocksize(flash_bank_t *bank)
+{
+ int i;
+ int block_size = 0xffffffff;
+
+ /* loop through all sectors and return smallest sector size */
+
+ for (i = 0; i < bank->num_sectors; i++)
+ {
+ if (bank->sectors[i].size < block_size)
+ block_size = bank->sectors[i].size;
+ }
+
+ return block_size;
+}
+
+int gdb_query_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
+{
+ command_context_t *cmd_ctx = connection->cmd_ctx;
+
+ if (strstr(packet, "qRcmd,"))
+ {
+ if (packet_size > 6)
+ {
+ char *cmd;
+ int i;
+ cmd = malloc((packet_size - 6)/2 + 1);
+ for (i=0; i < (packet_size - 6)/2; i++)
+ {
+ u32 tmp;
+ sscanf(packet + 6 + 2*i, "%2x", &tmp);
+ cmd[i] = tmp;
+ }
+ cmd[(packet_size - 6)/2] = 0x0;
+
+ /* We want to print all debug output to GDB connection */
+ log_setCallback(gdb_log_callback, connection);
+ target_call_timer_callbacks();
+ command_run_line(cmd_ctx, cmd);
+ free(cmd);
+ }
+ gdb_put_packet(connection, "OK", 2);
+ return ERROR_OK;
+ }
+ else if (strstr(packet, "qCRC:"))
+ {
+ if (packet_size > 5)
+ {
+ int retval;
+ char gdb_reply[10];
+ char *separator;
+ u32 checksum;
+ u32 addr = 0;
+ u32 len = 0;
+
+ /* skip command character */
+ packet += 5;
+
+ addr = strtoul(packet, &separator, 16);
+
+ if (*separator != ',')
+ {
+ ERROR("incomplete read memory packet received, dropping connection");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+
+ len = strtoul(separator + 1, NULL, 16);
+
+ retval = target_checksum_memory(target, addr, len, &checksum);
+
+ if (retval == ERROR_OK)
+ {
+ snprintf(gdb_reply, 10, "C%8.8x", checksum);
+ gdb_put_packet(connection, gdb_reply, 9);
+ }
+ else
+ {
+ if ((retval = gdb_memory_packet_error(connection, retval)) != ERROR_OK)
+ return retval;
+ }
+
+ return ERROR_OK;
+ }
+ }
+ else if (strstr(packet, "qSupported"))
+ {
+ /* we currently support packet size and qXfer:memory-map:read (if enabled)
+ * disable qXfer:features:read for the moment */
+ int retval = ERROR_OK;
+ char *buffer = NULL;
+ int pos = 0;
+ int size = 0;
+
+ xml_printf(&retval, &buffer, &pos, &size,
+ "PacketSize=%x;qXfer:memory-map:read%c;qXfer:features:read-",
+ (GDB_BUFFER_SIZE - 1), gdb_use_memory_map == 1 ? '+' : '-');
+
+ if (retval != ERROR_OK)
+ {
+ gdb_send_error(connection, 01);
+ return ERROR_OK;
+ }
+
+ gdb_put_packet(connection, buffer, strlen(buffer));
+ free(buffer);
+
+ return ERROR_OK;
+ }
+ else if (strstr(packet, "qXfer:memory-map:read::"))
+ {
+ /* We get away with only specifying flash here. Regions that are not
+ * specified are treated as if we provided no memory map(if not we
+ * could detect the holes and mark them as RAM).
+ * Normally we only execute this code once, but no big deal if we
+ * have to regenerate it a couple of times. */
+
+ flash_bank_t *p;
+ char *xml = NULL;
+ int size = 0;
+ int pos = 0;
+ int retval = ERROR_OK;
+
+ int offset;
+ int length;
+ char *separator;
+ int blocksize;
+
+ /* skip command character */
+ packet += 23;
+
+ offset = strtoul(packet, &separator, 16);
+ length = strtoul(separator + 1, &separator, 16);
+
+ xml_printf(&retval, &xml, &pos, &size, "<memory-map>\n");
+
+ int i = 0;
+ for (;;)
+ {
+ p = get_flash_bank_by_num(i);
+ if (p == NULL)
+ break;
+
+ /* if device has uneven sector sizes, eg. str7, lpc
+ * we pass the smallest sector size to gdb memory map */
+ blocksize = gdb_calc_blocksize(p);
+
+ xml_printf(&retval, &xml, &pos, &size, "<memory type=\"flash\" start=\"0x%x\" length=\"0x%x\">\n" \
+ "<property name=\"blocksize\">0x%x</property>\n" \
+ "</memory>\n", \
+ p->base, p->size, blocksize);
+ i++;
+ }
+
+ xml_printf(&retval, &xml, &pos, &size, "</memory-map>\n");
+
+ if (retval != ERROR_OK)
+ {
+ gdb_send_error(connection, retval);
+ return retval;
+ }
+
+ if (offset + length > pos)
+ {
+ length = pos - offset;
+ }
+
+ char *t = malloc(length + 1);
+ t[0] = 'l';
+ memcpy(t + 1, xml + offset, length);
+ gdb_put_packet(connection, t, length + 1);
+
+ free(t);
+ free(xml);
+ return ERROR_OK;
+ }
+ else if (strstr(packet, "qXfer:features:read:"))
+ {
+ char *xml = NULL;
+ int size = 0;
+ int pos = 0;
+ int retval = ERROR_OK;
+
+ int offset;
+ unsigned int length;
+ char *annex;
+
+ /* skip command character */
+ packet += 20;
+
+ if (decode_xfer_read(packet, &annex, &offset, &length) < 0)
+ {
+ gdb_send_error(connection, 01);
+ return ERROR_OK;
+ }
+
+ if (strcmp(annex, "target.xml") != 0)
+ {
+ gdb_send_error(connection, 01);
+ return ERROR_OK;
+ }
+
+ xml_printf(&retval, &xml, &pos, &size, \
+ "l<target version=\"1.0\">\n<architecture>arm</architecture>\n</target>\n");
+
+ if (retval != ERROR_OK)
+ {
+ gdb_send_error(connection, retval);
+ return retval;
+ }
+
+ gdb_put_packet(connection, xml, strlen(xml) + 1);
+
+ free(xml);
+ return ERROR_OK;
+ }
+
+ gdb_put_packet(connection, "", 0);
+ return ERROR_OK;
+}
+
+int gdb_v_packet(connection_t *connection, target_t *target, char *packet, int packet_size)
+{
+ gdb_connection_t *gdb_connection = connection->priv;
+ gdb_service_t *gdb_service = connection->service->priv;
+ int result;
+
+ /* if flash programming disabled - send a empty reply */
+
+ if (gdb_flash_program == 0)
+ {
+ gdb_put_packet(connection, "", 0);
+ return ERROR_OK;
+ }
+
+ if (strstr(packet, "vFlashErase:"))
+ {
+ unsigned long addr;
+ unsigned long length;
+
+ char *parse = packet + 12;
+ if (*parse == '\0')
+ {
+ ERROR("incomplete vFlashErase packet received, dropping connection");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+
+ addr = strtoul(parse, &parse, 16);
+
+ if (*(parse++) != ',' || *parse == '\0')
+ {
+ ERROR("incomplete vFlashErase packet received, dropping connection");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+
+ length = strtoul(parse, &parse, 16);
+
+ if (*parse != '\0')
+ {
+ ERROR("incomplete vFlashErase packet received, dropping connection");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+
+ /* assume all sectors need erasing - stops any problems
+ * when flash_write is called multiple times */
+ flash_set_dirty();
+
+ /* perform any target specific operations before the erase */
+ target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_PROGRAM);
+
+ /* perform erase */
+ if ((result = flash_erase_address_range(gdb_service->target, addr, length)) != ERROR_OK)
+ {
+ /* GDB doesn't evaluate the actual error number returned,
+ * treat a failed erase as an I/O error
+ */
+ gdb_send_error(connection, EIO);
+ ERROR("flash_erase returned %i", result);
+ }
+ else
+ gdb_put_packet(connection, "OK", 2);
+
+ return ERROR_OK;
+ }
+
+ if (strstr(packet, "vFlashWrite:"))
+ {
+ unsigned long addr;
+ unsigned long length;
+ char *parse = packet + 12;
+
+ if (*parse == '\0')
+ {
+ ERROR("incomplete vFlashErase packet received, dropping connection");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+ addr = strtoul(parse, &parse, 16);
+ if (*(parse++) != ':')
+ {
+ ERROR("incomplete vFlashErase packet received, dropping connection");
+ return ERROR_SERVER_REMOTE_CLOSED;
+ }
+ length = packet_size - (parse - packet);
+
+ /* create a new image if there isn't already one */
+ if (gdb_connection->vflash_image == NULL)
+ {
+ gdb_connection->vflash_image = malloc(sizeof(image_t));
+ image_open(gdb_connection->vflash_image, "", "build");
+ }
+
+ /* create new section with content from packet buffer */
+ image_add_section(gdb_connection->vflash_image, addr, length, 0x0, (u8*)parse);
+
+ gdb_put_packet(connection, "OK", 2);
+
+ return ERROR_OK;
+ }
+
+ if (!strcmp(packet, "vFlashDone"))
+ {
+ u32 written;
+
+ /* process the flashing buffer. No need to erase as GDB
+ * always issues a vFlashErase first. */
+ if ((result = flash_write(gdb_service->target, gdb_connection->vflash_image, &written, 0)) != ERROR_OK)
+ {
+ if (result == ERROR_FLASH_DST_OUT_OF_BANK)
+ gdb_put_packet(connection, "E.memtype", 9);
+ else
+ gdb_send_error(connection, EIO);
+ }
+ else
+ {
+ DEBUG("wrote %u bytes from vFlash image to flash", written);
+ gdb_put_packet(connection, "OK", 2);
+ }
+
+ image_close(gdb_connection->vflash_image);
+ free(gdb_connection->vflash_image);
+ gdb_connection->vflash_image = NULL;
+
+ return ERROR_OK;
+ }
+
+ gdb_put_packet(connection, "", 0);
+ return ERROR_OK;
+}
+
+int gdb_detach(connection_t *connection, target_t *target)
+{
+ switch( detach_mode )
+ {
+ case GDB_DETACH_RESUME:
+ target->type->resume(target, 1, 0, 1, 0);
+ break;
+
+ case GDB_DETACH_RESET:
+ target_process_reset(connection->cmd_ctx);
+ break;
+
+ case GDB_DETACH_HALT:
+ target->type->halt(target);
+ break;
+
+ case GDB_DETACH_NOTHING:
+ break;
+ }
+
+ gdb_put_packet(connection, "OK", 2);
+
+ return ERROR_OK;
+}
+
+static void gdb_log_callback(void *priv, const char *file, int line,
+ const char *function, const char *format, va_list args)
+{
+ connection_t *connection = priv;
+ gdb_connection_t *gdb_con = connection->priv;
+
+ if (gdb_con->busy)
+ {
+ /* do not reply this using the O packet */
+ return;
+ }
+
+ char *t = allocPrintf(format, args);
+ if (t == NULL)
+ return;
+
+ gdb_output_con(connection, t);
+
+ free(t);
+}
+
+int gdb_input_inner(connection_t *connection)
+{
+ gdb_service_t *gdb_service = connection->service->priv;
+ target_t *target = gdb_service->target;
+ char packet[GDB_BUFFER_SIZE];
+ int packet_size;
+ int retval;
+ gdb_connection_t *gdb_con = connection->priv;
+ static int extended_protocol = 0;
+
+ /* drain input buffer */
+ do
+ {
+ packet_size = GDB_BUFFER_SIZE-1;
+ if ((retval = gdb_get_packet(connection, packet, &packet_size)) != ERROR_OK)
+ {
+ return retval;
+ }
+
+ /* terminate with zero */
+ packet[packet_size] = 0;
+
+ DEBUG("received packet: '%s'", packet);
+
+ if (packet_size > 0)
+ {
+ retval = ERROR_OK;
+ switch (packet[0])
+ {
+ case 'H':
+ /* Hct... -- set thread
+ * we don't have threads, send empty reply */
+ gdb_put_packet(connection, NULL, 0);
+ break;
+ case 'q':
+ retval = gdb_query_packet(connection, target, packet, packet_size);
+ break;
+ case 'g':
+ retval = gdb_get_registers_packet(connection, target, packet, packet_size);
+ break;
+ case 'G':
+ retval = gdb_set_registers_packet(connection, target, packet, packet_size);
+ break;
+ case 'p':
+ retval = gdb_get_register_packet(connection, target, packet, packet_size);
+ break;
+ case 'P':
+ retval = gdb_set_register_packet(connection, target, packet, packet_size);
+ break;
+ case 'm':
+ retval = gdb_read_memory_packet(connection, target, packet, packet_size);
+ break;
+ case 'M':
+ retval = gdb_write_memory_packet(connection, target, packet, packet_size);
+ break;
+ case 'z':
+ case 'Z':
+ retval = gdb_breakpoint_watchpoint_packet(connection, target, packet, packet_size);
+ break;
+ case '?':
+ gdb_last_signal_packet(connection, target, packet, packet_size);
+ break;
+ case 'c':
+ case 's':
+ {
+ /* We're running/stepping, in which case we can
+ * forward log output until the target is halted */
+ gdb_connection_t *gdb_con = connection->priv;
+ gdb_con->frontend_state = TARGET_RUNNING;
+ log_setCallback(gdb_log_callback, connection);
+ gdb_step_continue_packet(connection, target, packet, packet_size);
+ }
+ break;
+ case 'v':
+ retval = gdb_v_packet(connection, target, packet, packet_size);
+ break;
+ case 'D':
+ retval = gdb_detach(connection, target);
+ extended_protocol = 0;
+ break;
+ case 'X':
+ if ((retval = gdb_write_memory_binary_packet(connection, target, packet, packet_size)) != ERROR_OK)
+ return retval;
+ break;
+ case 'k':
+ if (extended_protocol != 0)
+ break;
+ gdb_put_packet(connection, "OK", 2);
+ return ERROR_SERVER_REMOTE_CLOSED;
+ case '!':
+ /* handle extended remote protocol */
+ extended_protocol = 1;
+ gdb_put_packet(connection, "OK", 2);
+ break;
+ case 'R':
+ /* handle extended restart packet */
+ target_process_reset(connection->cmd_ctx);
+ break;
+ default:
+ /* ignore unkown packets */
+ DEBUG("ignoring 0x%2.2x packet", packet[0]);
+ gdb_put_packet(connection, NULL, 0);
+ break;
+ }
+
+ /* if a packet handler returned an error, exit input loop */
+ if (retval != ERROR_OK)
+ return retval;
+ }
+
+ if (gdb_con->ctrl_c)
+ {
+ if (target->state == TARGET_RUNNING)
+ {
+ target->type->halt(target);
+ gdb_con->ctrl_c = 0;
+ }
+ }
+
+ } while (gdb_con->buf_cnt > 0);
+
+ return ERROR_OK;
+}
+
+int gdb_input(connection_t *connection)
+{
+ int retval = gdb_input_inner(connection);
+ if (retval == ERROR_SERVER_REMOTE_CLOSED)
+ return retval;
+ /* we'll recover from any other errors(e.g. temporary timeouts, etc.) */
+ return ERROR_OK;
+}
+
+int gdb_init()
+{
+ gdb_service_t *gdb_service;
+ target_t *target = targets;
+ int i = 0;
+
+ if (!target)
+ {
+ WARNING("no gdb ports allocated as no target has been specified");
+ return ERROR_OK;
+ }
+
+ if (gdb_port == 0)
+ {
+ WARNING("no gdb port specified, using default port 3333");
+ gdb_port = 3333;
+ }
+
+ while (target)
+ {
+ char service_name[8];
+
+ snprintf(service_name, 8, "gdb-%2.2i", i);
+
+ gdb_service = malloc(sizeof(gdb_service_t));
+ gdb_service->target = target;
+
+ add_service("gdb", CONNECTION_GDB, gdb_port + i, 1, gdb_new_connection, gdb_input, gdb_connection_closed, gdb_service);
+
+ DEBUG("gdb service for target %s at port %i", target->type->name, gdb_port + i);
+
+ i++;
+ target = target->next;
+ }
+
+ return ERROR_OK;
+}
+
+/* daemon configuration command gdb_port */
+int handle_gdb_port_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ if (argc == 0)
+ return ERROR_OK;
+
+ /* only if the port wasn't overwritten by cmdline */
+ if (gdb_port == 0)
+ gdb_port = strtoul(args[0], NULL, 0);
+
+ return ERROR_OK;
+}
+
+int handle_gdb_detach_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ if (argc == 1)
+ {
+ if (strcmp(args[0], "resume") == 0)
+ {
+ detach_mode = GDB_DETACH_RESUME;
+ return ERROR_OK;
+ }
+ else if (strcmp(args[0], "reset") == 0)
+ {
+ detach_mode = GDB_DETACH_RESET;
+ return ERROR_OK;
+ }
+ else if (strcmp(args[0], "halt") == 0)
+ {
+ detach_mode = GDB_DETACH_HALT;
+ return ERROR_OK;
+ }
+ else if (strcmp(args[0], "nothing") == 0)
+ {
+ detach_mode = GDB_DETACH_NOTHING;
+ return ERROR_OK;
+ }
+ }
+
+ WARNING("invalid gdb_detach configuration directive: %s", args[0]);
+ return ERROR_OK;
+}
+
+int handle_gdb_memory_map_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ if (argc == 1)
+ {
+ if (strcmp(args[0], "enable") == 0)
+ {
+ gdb_use_memory_map = 1;
+ return ERROR_OK;
+ }
+ else if (strcmp(args[0], "disable") == 0)
+ {
+ gdb_use_memory_map = 0;
+ return ERROR_OK;
+ }
+ }
+
+ WARNING("invalid gdb_memory_map configuration directive: %s", args[0]);
+ return ERROR_OK;
+}
+
+int handle_gdb_flash_program_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ if (argc == 1)
+ {
+ if (strcmp(args[0], "enable") == 0)
+ {
+ gdb_flash_program = 1;
+ return ERROR_OK;
+ }
+ else if (strcmp(args[0], "disable") == 0)
+ {
+ gdb_flash_program = 0;
+ return ERROR_OK;
+ }
+ }
+
+ WARNING("invalid gdb_memory_map configuration directive: %s", args[0]);
+ return ERROR_OK;
+}
+
+int handle_gdb_report_data_abort_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ if (argc == 1)
+ {
+ if (strcmp(args[0], "enable") == 0)
+ {
+ gdb_report_data_abort = 1;
+ return ERROR_OK;
+ }
+ else if (strcmp(args[0], "disable") == 0)
+ {
+ gdb_report_data_abort = 0;
+ return ERROR_OK;
+ }
+ }
+
+ WARNING("invalid gdb_report_data_abort configuration directive: %s", args[0]);
+ return ERROR_OK;
+}
+
+int gdb_register_commands(command_context_t *command_context)
+{
+ register_command(command_context, NULL, "gdb_port", handle_gdb_port_command,
+ COMMAND_CONFIG, "");
+ register_command(command_context, NULL, "gdb_detach", handle_gdb_detach_command,
+ COMMAND_CONFIG, "");
+ register_command(command_context, NULL, "gdb_memory_map", handle_gdb_memory_map_command,
+ COMMAND_CONFIG, "");
+ register_command(command_context, NULL, "gdb_flash_program", handle_gdb_flash_program_command,
+ COMMAND_CONFIG, "");
+ register_command(command_context, NULL, "gdb_report_data_abort", handle_gdb_report_data_abort_command,
+ COMMAND_CONFIG, "");
+ return ERROR_OK;
+}
generated by cgit v1.2.3 (git 2.46.0) at 2024-11-10 18:10:37 +0000