diff options
Diffstat (limited to 'tcl/board/crossbow_tech_imote2.cfg')
| -rw-r--r-- | tcl/board/crossbow_tech_imote2.cfg | 46 |
1 files changed, 46 insertions, 0 deletions
diff --git a/tcl/board/crossbow_tech_imote2.cfg b/tcl/board/crossbow_tech_imote2.cfg new file mode 100644 index 00000000..7527bef8 --- /dev/null +++ b/tcl/board/crossbow_tech_imote2.cfg @@ -0,0 +1,46 @@ +# Crossbow Technology iMote2 + +if { [info exists CHIPNAME] } { + set _CHIPNAME $CHIPNAME +} else { + set _CHIPNAME imote2 +} + +if { [info exists ENDIAN] } { + set _ENDIAN $ENDIAN +} else { + set _ENDIAN little +} + +if { [info exists CPUTAPID ] } { + set _CPUTAPID $CPUTAPID +} else { + # force an error till we get a good number + set _CPUTAPID 0xffffffff +} + +# PXA271 and an Intel Strataflash of 32 Megabytes (p30) +# +# Marvell/Intel PXA270 Script +# set jtag_nsrst_delay to the delay introduced by your reset circuit +# the rest of the needed delays are built into the openocd program +jtag_nsrst_delay 800 +# set the jtag_ntrst_delay to the delay introduced by a reset circuit +# the rest of the needed delays are built into the openocd program +jtag_ntrst_delay 0 +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst separate +#jtag scan chain + +jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID + +set _TARGETNAME [format "%s.cpu" $_CHIPNAME] +target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant pxa27x +$_TARGETNAME configure -work-area-virt 0x0x5c000000 -work-area-phys 0x0x5c000000 -work-area-size 0x10000 -work-area-backup 1 +# maps to PXA internal RAM. If you are using a PXA255 +# you must initialize SDRAM or leave this option off + + +#flash bank <driver> <base> <size> <chip_width> <bus_width> +# works for P30 flash +flash bank cfi 0x00000000 0x2000000 2 2 0 |