diff options
Diffstat (limited to 'tcl/board')
| -rw-r--r-- | tcl/board/hitex_stm32-performancestick.cfg | 47 |
1 files changed, 3 insertions, 44 deletions
diff --git a/tcl/board/hitex_stm32-performancestick.cfg b/tcl/board/hitex_stm32-performancestick.cfg index 5effbd96..509f98a8 100644 --- a/tcl/board/hitex_stm32-performancestick.cfg +++ b/tcl/board/hitex_stm32-performancestick.cfg @@ -1,50 +1,9 @@ # Hitex stm32 performance stick -if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME -} else { - set _CHIPNAME stm32_hitex -} - -if { [info exists ENDIAN] } { - set _ENDIAN $ENDIAN -} else { - set _ENDIAN little -} - -# set jtag speed -jtag_khz 500 - -jtag_nsrst_delay 100 -jtag_ntrst_delay 100 - -#use combined on interfaces or targets that can't set TRST/SRST separately -reset_config trst_and_srst - -#jtag scan chain -# The CPU -if { [info exists CPUTAPID ] } { - set _CPUTAPID $CPUTAPID -} else { - # See STM Document RM0008 - # Section 26.6.3 - set _CPUTAPID 0x3ba00477 -} -jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID - -# The boundery scan register, leave the "expected-id" undefined. -jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 +set CHIPNAME stm32_hitex +source [find target/stm32.cfg] # configure str750 connected to jtag chain +# FIXME -- source [find target/str750.cfg] after cleaning that up jtag newtap $_CHIPNAME unknown -irlen 4 -ircapture 0x1 -irmask 0x0f -set _TARGETNAME [format "%s.cpu" $_CHIPNAME] -target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME - -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0 - -# -flash bank stm32x 0 0 0 0 0 - -# For more information about the configuration files, take a look at: -# openocd.texi |