summaryrefslogtreecommitdiff
path: root/tcl/target
diff options
context:
space:
mode:
Diffstat (limited to 'tcl/target')
-rw-r--r--tcl/target/at91sam3u4c.cfg4
-rw-r--r--tcl/target/at91sam3u4e.cfg4
-rw-r--r--tcl/target/pic32mx.cfg4
-rw-r--r--tcl/target/str710.cfg4
-rw-r--r--tcl/target/str750.cfg4
-rw-r--r--tcl/target/str912.cfg4
6 files changed, 12 insertions, 12 deletions
diff --git a/tcl/target/at91sam3u4c.cfg b/tcl/target/at91sam3u4c.cfg
index e2812870..5cacbcbe 100644
--- a/tcl/target/at91sam3u4c.cfg
+++ b/tcl/target/at91sam3u4c.cfg
@@ -2,10 +2,10 @@
source [find target/at91sam3uxx.cfg]
# size is automatically "calculated" by probing
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash0
flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME
# This is a 256K chip, it has the 2nd bank
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME at91sam3 0x000100000 0 1 1 $_TARGETNAME
diff --git a/tcl/target/at91sam3u4e.cfg b/tcl/target/at91sam3u4e.cfg
index e549185a..6f6e0d87 100644
--- a/tcl/target/at91sam3u4e.cfg
+++ b/tcl/target/at91sam3u4e.cfg
@@ -2,10 +2,10 @@
source [find target/at91sam3uXX.cfg]
# size is automatically "calculated" by probing
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash0
flash bank $_FLASHNAME at91sam3 0x000080000 0 1 1 $_TARGETNAME
# This is a 256K chip - it has the 2nd bank
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME at91sam3 0x000100000 0 1 1 $_TARGETNAME
diff --git a/tcl/target/pic32mx.cfg b/tcl/target/pic32mx.cfg
index 673d2541..0b99cdb4 100644
--- a/tcl/target/pic32mx.cfg
+++ b/tcl/target/pic32mx.cfg
@@ -67,9 +67,9 @@ $_TARGETNAME configure -event reset-init {
mww 0xbf882030 $_PIC32MX_PROGSIZE
}
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash0
flash bank $_FLASHNAME pic32mx 0x1fc00000 0 0 0 $_TARGETNAME
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME pic32mx 0x1d000000 0 0 0 $_TARGETNAME
# For more information about the configuration files, take a look at:
diff --git a/tcl/target/str710.cfg b/tcl/target/str710.cfg
index 4d685865..a5955b68 100644
--- a/tcl/target/str710.cfg
+++ b/tcl/target/str710.cfg
@@ -47,9 +47,9 @@ $_TARGETNAME configure -event gdb-flash-erase-start {
$_TARGETNAME configure -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup 0
#flash bank str7x <base> <size> 0 0 <target#> <variant>
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash0
flash bank $_FLASHNAME str7x 0x40000000 0x00040000 0 0 $_TARGETNAME STR71x
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME str7x 0x400C0000 0x00004000 0 0 $_TARGETNAME STR71x
# For more information about the configuration files, take a look at:
diff --git a/tcl/target/str750.cfg b/tcl/target/str750.cfg
index 8a642261..7d9f0343 100644
--- a/tcl/target/str750.cfg
+++ b/tcl/target/str750.cfg
@@ -53,8 +53,8 @@ $_TARGETNAME configure -event gdb-flash-erase-start {
$_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
#flash bank <driver> <base> <size> <chip_width> <bus_width>
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash0
flash bank $_FLASHNAME str7x 0x20000000 0x00040000 0 0 $_TARGETNAME STR75x
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME str7x 0x200C0000 0x00004000 0 0 $_TARGETNAME STR75x
diff --git a/tcl/target/str912.cfg b/tcl/target/str912.cfg
index 6f2981a1..a16c83a0 100644
--- a/tcl/target/str912.cfg
+++ b/tcl/target/str912.cfg
@@ -63,9 +63,9 @@ $_TARGETNAME configure -event reset-init {
$_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0
#flash bank str9x <base> <size> 0 0 <target#> <variant>
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash0
flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 $_TARGETNAME
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 $_TARGETNAME
# For more information about the configuration files, take a look at: