diff options
Diffstat (limited to 'testing/examples')
| -rw-r--r-- | testing/examples/ledtest-imx31pdk/Makefile | 84 | ||||
| -rw-r--r-- | testing/examples/ledtest-imx31pdk/crt0.S | 94 | ||||
| -rw-r--r-- | testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk | 257 | ||||
| -rw-r--r-- | testing/examples/ledtest-imx31pdk/ldscript | 36 |
4 files changed, 234 insertions, 237 deletions
diff --git a/testing/examples/ledtest-imx31pdk/Makefile b/testing/examples/ledtest-imx31pdk/Makefile index fc643adc..74e2fc23 100644 --- a/testing/examples/ledtest-imx31pdk/Makefile +++ b/testing/examples/ledtest-imx31pdk/Makefile @@ -1,42 +1,42 @@ -# $Header: $
-# This will make the test program for ARM.
-
-PROC=arm
-TYPE=none-linux-gnueabi
-LDSCRIPT=ldscript
-
-PATH:=/opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/:$(PATH)
-CC=$(PROC)-$(TYPE)-gcc
-AS=$(PROC)-$(TYPE)-as
-AR=$(PROC)-$(TYPE)-ar
-LD=$(PROC)-$(TYPE)-ld
-NM=$(PROC)-$(TYPE)-nm
-OBJDUMP=$(PROC)-$(TYPE)-objdump
-CFLAGS= -g -c -mcpu=arm1136j-s
-
-all: test.elf
-
-# Make a little endian image:
-# In Eclipse, add the line :
-# source gdbinit
-# to : Run -> Debug... (menu) -> Commands (tab): Commands (listbox)
-# To start gdb from a window use : arm-elf-gdb --command=gdbinit
-test.elf: test.c Makefile ldscript crt0.S
- $(CC) $(CFLAGS) -o crt0.o crt0.S
- $(CC) $(CFLAGS) -o test.o test.c
- $(LD) -g -v -T$(LDSCRIPT) -o test.elf crt0.o test.o
- $(NM) test.elf
-
-
-dump:
- $(OBJDUMP) --all-headers test.elf
-
-dump_test:
- $(OBJDUMP) --disassemble test.elf
-
-dump_full:
- $(OBJDUMP) --full-contents test.elf
-
-clean:
- -/bin/rm -f *.o *~ test.elf
-
+# $Header: $ +# This will make the test program for ARM. + +PROC=arm +TYPE=none-linux-gnueabi +LDSCRIPT=ldscript + +PATH:=/opt/freescale/usr/local/gcc-4.1.2-glibc-2.5-nptl-3/arm-none-linux-gnueabi/bin/:$(PATH) +CC=$(PROC)-$(TYPE)-gcc +AS=$(PROC)-$(TYPE)-as +AR=$(PROC)-$(TYPE)-ar +LD=$(PROC)-$(TYPE)-ld +NM=$(PROC)-$(TYPE)-nm +OBJDUMP=$(PROC)-$(TYPE)-objdump +CFLAGS= -g -c -mcpu=arm1136j-s + +all: test.elf + +# Make a little endian image: +# In Eclipse, add the line : +# source gdbinit +# to : Run -> Debug... (menu) -> Commands (tab): Commands (listbox) +# To start gdb from a window use : arm-elf-gdb --command=gdbinit +test.elf: test.c Makefile ldscript crt0.S + $(CC) $(CFLAGS) -o crt0.o crt0.S + $(CC) $(CFLAGS) -o test.o test.c + $(LD) -g -v -T$(LDSCRIPT) -o test.elf crt0.o test.o + $(NM) test.elf + + +dump: + $(OBJDUMP) --all-headers test.elf + +dump_test: + $(OBJDUMP) --disassemble test.elf + +dump_full: + $(OBJDUMP) --full-contents test.elf + +clean: + -/bin/rm -f *.o *~ test.elf + diff --git a/testing/examples/ledtest-imx31pdk/crt0.S b/testing/examples/ledtest-imx31pdk/crt0.S index 6c15be21..d7498814 100644 --- a/testing/examples/ledtest-imx31pdk/crt0.S +++ b/testing/examples/ledtest-imx31pdk/crt0.S @@ -1,47 +1,47 @@ -/* Sample initialization file */
-
- .extern main
- .extern exit
-
-/* .text is used instead of .section .text so it works with arm-aout too. */
- .text
- .code 32
- .align 0
-
- .global _mainCRTStartup
- .global _start
- .global start
-start:
-_start:
-_mainCRTStartup:
-
-/* Start by setting up a stack */
- /* Set up the stack pointer to end of bss */
- ldr r3, .LC2
- mov sp, r3
-
- sub sl, sp, #512 /* Still assumes 512 bytes below sl */
-
- mov a2, #0 /* Second arg: fill value */
- mov fp, a2 /* Null frame pointer */
- mov r7, a2 /* Null frame pointer for Thumb */
-
- ldr a1, .LC1 /* First arg: start of memory block */
- ldr a3, .LC2 /* Second arg: end of memory block */
- sub a3, a3, a1 /* Third arg: length of block */
-
- mov r0, #0 /* no arguments */
- mov r1, #0 /* no argv either */
-
- bl main
- bl exit /* Should not return */
-
- /* For Thumb, constants must be after the code since only
- positive offsets are supported for PC relative addresses. */
-
- .align 0
-.LC1:
- .word __bss_start__
-.LC2:
- .word __bss_end__
-
+/* Sample initialization file */ + + .extern main + .extern exit + +/* .text is used instead of .section .text so it works with arm-aout too. */ + .text + .code 32 + .align 0 + + .global _mainCRTStartup + .global _start + .global start +start: +_start: +_mainCRTStartup: + +/* Start by setting up a stack */ + /* Set up the stack pointer to end of bss */ + ldr r3, .LC2 + mov sp, r3 + + sub sl, sp, #512 /* Still assumes 512 bytes below sl */ + + mov a2, #0 /* Second arg: fill value */ + mov fp, a2 /* Null frame pointer */ + mov r7, a2 /* Null frame pointer for Thumb */ + + ldr a1, .LC1 /* First arg: start of memory block */ + ldr a3, .LC2 /* Second arg: end of memory block */ + sub a3, a3, a1 /* Third arg: length of block */ + + mov r0, #0 /* no arguments */ + mov r1, #0 /* no argv either */ + + bl main + bl exit /* Should not return */ + + /* For Thumb, constants must be after the code since only + positive offsets are supported for PC relative addresses. */ + + .align 0 +.LC1: + .word __bss_start__ +.LC2: + .word __bss_end__ + diff --git a/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk b/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk index b1148c6a..5b78daa2 100644 --- a/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk +++ b/testing/examples/ledtest-imx31pdk/gdbinit-imx31pdk @@ -1,131 +1,128 @@ -echo Setting up for the FreeScale iMX31 Board.\n
-# SETUP GDB :
-#
-# Common gdb setup for ARM CPUs
-set complaints 1
-set output-radix 10
-set input-radix 10
-set prompt (arm-gdb)
-set endian little
-dir .
-
-
-# DEFINE MACROS :
-#
-# Create a "refresh" macro to update gdb's screens after the cpu
-# has been stopped by the other CPU or following an "monitor allstop"
-define refresh
- monitor set hbreak
- cont
- monitor clear hbreak
-end
-
-
-# CONNECT TO TARGET :
-target remote 127.0.0.1:3333
-monitor reset run
-#FIX!!!! should be reset init!
-monitor reset halt
-
-# iMX31 PDK board initialization commands:
-
-#// init_ccm
-
-monitor mww 0x53FC0000 0x040
-monitor mww 0x53F80000 0x074B0B7D
-
-#//532-133-66.5
-#//monitor mww 0x53F80004 0xFF871D58
-#//monitor mww 0x53F80010 0x0033280C
-
-#// 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40
-monitor mww 0x53F80004 0xFF871D50
-monitor mww 0x53F80010 0x00271C1B
-
-#// 208-104-52
-#//monitor mww 0x53F80004 0xFF871D48
-#//monitor mww 0x53F80010 0x04002000
-
-
-#// Configure CPLD on CS5
-monitor mww 0xb8002050 0x0000DCF6
-monitor mww 0xb8002054 0x444A4541
-monitor mww 0xb8002058 0x44443302
-
-#// Disable maximum drive strength for SDRAM/DDR lines by clearing DSE1 bits
-#// in SW_PAD_CTL registers
-
-#// SDCLK
-monitor mww 0x43FAC26C 0
-
-#// CAS
-monitor mww 0x43FAC270 0
-
-#// RAS
-monitor mww 0x43FAC274 0
-
-#// CS2 (CSD0)
-monitor mww 0x43FAC27C 0x1000
-
-#// DQM3
-monitor mww 0x43FAC284 0
-
-#// DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC)
-monitor mww 0x43FAC288 0
-monitor mww 0x43FAC28C 0
-monitor mww 0x43FAC290 0
-monitor mww 0x43FAC294 0
-monitor mww 0x43FAC298 0
-monitor mww 0x43FAC29C 0
-monitor mww 0x43FAC2A0 0
-monitor mww 0x43FAC2A4 0
-monitor mww 0x43FAC2A8 0
-monitor mww 0x43FAC2AC 0
-monitor mww 0x43FAC2B0 0
-monitor mww 0x43FAC2B4 0
-monitor mww 0x43FAC2B8 0
-monitor mww 0x43FAC2BC 0
-monitor mww 0x43FAC2C0 0
-monitor mww 0x43FAC2C4 0
-monitor mww 0x43FAC2C8 0
-monitor mww 0x43FAC2CC 0
-monitor mww 0x43FAC2D0 0
-monitor mww 0x43FAC2D4 0
-monitor mww 0x43FAC2D8 0
-monitor mww 0x43FAC2DC 0
-
-#// Initialization script for 32 bit DDR on MX31 PDK
-monitor mww 0xB8001010 0x00000004
-monitor mww 0xB8001004 0x006ac73a
-monitor mww 0xB8001000 0x92100000
-monitor mww 0x80000f00 0x12344321
-monitor mww 0xB8001000 0xa2100000
-monitor mww 0x80000000 0x12344321
-monitor mww 0x80000000 0x12344321
-monitor mww 0xB8001000 0xb2100000
-#monitor char 0x80000033 0xda
-monitor mwb 0x80000033 0xda
-#monitor char 0x81000000 0xff
-monitor mwb 0x81000000 0xff
-monitor mww 0xB8001000 0x82226080
-monitor mww 0x80000000 0xDEADBEEF
-monitor mww 0xB8001010 0x0000000c
-
-# LOAD IMAGE :
-#
-
-# Load the program executable called "u-boot"
-load test.elf
-
-# Load the symbols for the program.
-symbol-file test.elf
-
-# RUN TO MAIN :
-#
-# Set a breakpoint at main().
-#b reset
-b main
-
-# Run to the breakpoint.
-c
+echo Setting up for the FreeScale iMX31 Board.\n +# SETUP GDB : +# +# Common gdb setup for ARM CPUs +set complaints 1 +set output-radix 10 +set input-radix 10 +set prompt (arm-gdb) +set endian little +dir . + +# DEFINE MACROS : +# +# Create a "refresh" macro to update gdb's screens after the cpu +# has been stopped by the other CPU or following an "monitor allstop" +define refresh + monitor set hbreak + cont + monitor clear hbreak +end + +# CONNECT TO TARGET : +target remote 127.0.0.1:3333 +monitor reset run +#FIX!!!! should be reset init! +monitor reset halt + +# iMX31 PDK board initialization commands: + +#// init_ccm + +monitor mww 0x53FC0000 0x040 +monitor mww 0x53F80000 0x074B0B7D + +#//532-133-66.5 +#//monitor mww 0x53F80004 0xFF871D58 +#//monitor mww 0x53F80010 0x0033280C + +#// 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40 +monitor mww 0x53F80004 0xFF871D50 +monitor mww 0x53F80010 0x00271C1B + +#// 208-104-52 +#//monitor mww 0x53F80004 0xFF871D48 +#//monitor mww 0x53F80010 0x04002000 + +#// Configure CPLD on CS5 +monitor mww 0xb8002050 0x0000DCF6 +monitor mww 0xb8002054 0x444A4541 +monitor mww 0xb8002058 0x44443302 + +#// Disable maximum drive strength for SDRAM/DDR lines by clearing DSE1 bits +#// in SW_PAD_CTL registers + +#// SDCLK +monitor mww 0x43FAC26C 0 + +#// CAS +monitor mww 0x43FAC270 0 + +#// RAS +monitor mww 0x43FAC274 0 + +#// CS2 (CSD0) +monitor mww 0x43FAC27C 0x1000 + +#// DQM3 +monitor mww 0x43FAC284 0 + +#// DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) +monitor mww 0x43FAC288 0 +monitor mww 0x43FAC28C 0 +monitor mww 0x43FAC290 0 +monitor mww 0x43FAC294 0 +monitor mww 0x43FAC298 0 +monitor mww 0x43FAC29C 0 +monitor mww 0x43FAC2A0 0 +monitor mww 0x43FAC2A4 0 +monitor mww 0x43FAC2A8 0 +monitor mww 0x43FAC2AC 0 +monitor mww 0x43FAC2B0 0 +monitor mww 0x43FAC2B4 0 +monitor mww 0x43FAC2B8 0 +monitor mww 0x43FAC2BC 0 +monitor mww 0x43FAC2C0 0 +monitor mww 0x43FAC2C4 0 +monitor mww 0x43FAC2C8 0 +monitor mww 0x43FAC2CC 0 +monitor mww 0x43FAC2D0 0 +monitor mww 0x43FAC2D4 0 +monitor mww 0x43FAC2D8 0 +monitor mww 0x43FAC2DC 0 + +#// Initialization script for 32 bit DDR on MX31 PDK +monitor mww 0xB8001010 0x00000004 +monitor mww 0xB8001004 0x006ac73a +monitor mww 0xB8001000 0x92100000 +monitor mww 0x80000f00 0x12344321 +monitor mww 0xB8001000 0xa2100000 +monitor mww 0x80000000 0x12344321 +monitor mww 0x80000000 0x12344321 +monitor mww 0xB8001000 0xb2100000 +#monitor char 0x80000033 0xda +monitor mwb 0x80000033 0xda +#monitor char 0x81000000 0xff +monitor mwb 0x81000000 0xff +monitor mww 0xB8001000 0x82226080 +monitor mww 0x80000000 0xDEADBEEF +monitor mww 0xB8001010 0x0000000c + +# LOAD IMAGE : +# + +# Load the program executable called "u-boot" +load test.elf + +# Load the symbols for the program. +symbol-file test.elf + +# RUN TO MAIN : +# +# Set a breakpoint at main(). +#b reset +b main + +# Run to the breakpoint. +c diff --git a/testing/examples/ledtest-imx31pdk/ldscript b/testing/examples/ledtest-imx31pdk/ldscript index 1baea1ef..d6f60d6f 100644 --- a/testing/examples/ledtest-imx31pdk/ldscript +++ b/testing/examples/ledtest-imx31pdk/ldscript @@ -1,18 +1,18 @@ -SECTIONS
-{
- . = 0x80000100;
- .text : { *(.text) }
- .data ALIGN(0x10): { *(.data) }
- .bss ALIGN(0x10): {
- __bss_start__ = ABSOLUTE(.);
- *(.bss)
- . += 0x100;
- }
- __bss_end__ = .;
-PROVIDE (__stack = .);
- _end = .;
- .debug_info 0 : { *(.debug_info) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
-}
+SECTIONS +{ + . = 0x80000100; + .text : { *(.text) } + .data ALIGN(0x10): { *(.data) } + .bss ALIGN(0x10): { + __bss_start__ = ABSOLUTE(.); + *(.bss) + . += 0x100; + } + __bss_end__ = .; +PROVIDE (__stack = .); + _end = .; + .debug_info 0 : { *(.debug_info) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } +} |