summaryrefslogtreecommitdiff
path: root/tools/xsvf_tools
diff options
context:
space:
mode:
Diffstat (limited to 'tools/xsvf_tools')
-rw-r--r--tools/xsvf_tools/svf2xsvf.py32
-rw-r--r--tools/xsvf_tools/xsvfdump.py15
2 files changed, 44 insertions, 3 deletions
diff --git a/tools/xsvf_tools/svf2xsvf.py b/tools/xsvf_tools/svf2xsvf.py
index 20080db3..bf2a1209 100644
--- a/tools/xsvf_tools/svf2xsvf.py
+++ b/tools/xsvf_tools/svf2xsvf.py
@@ -57,6 +57,11 @@ outputFilename = sys.argv[2]
doCOMMENTs = True # Save XCOMMENTs in the output xsvf file
#doCOMMENTs = False # Save XCOMMENTs in the output xsvf file
+# pick your file encoding
+file_encoding = 'ISO-8859-1'
+#file_encoding = 'utf-8'
+
+
xrepeat = 0 # argument to XREPEAT, gives retry count for masked compares
@@ -74,7 +79,8 @@ StateTxt = ("RESET","IDLE",
(XCOMPLETE,XTDOMASK,XSIR,XSDR,XRUNTEST,hole0,hole1,XREPEAT,XSDRSIZE,XSDRTDO,
XSETSDRMASKS,XSDRINC,XSDRB,XSDRC,XSDRE,XSDRTDOB,XSDRTDOC,
- XSDRTDOE,XSTATE,XENDIR,XENDDR,XSIR2,XCOMMENT,XWAIT,XWAITSTATE,LCOUNT,LDELAY,LSDR) = range(28)
+ XSDRTDOE,XSTATE,XENDIR,XENDDR,XSIR2,XCOMMENT,XWAIT,XWAITSTATE,
+ LCOUNT,LDELAY,LSDR,XTRST) = range(29)
#Note: LCOUNT, LDELAY, and LSDR are Lattice extensions to SVF and provide a way to loop back
# and check a completion status, essentially waiting on a part until it signals that it is done.
@@ -90,6 +96,8 @@ LSDR 1 TDI (0)
TDO (1);
"""
+#XTRST is an opcode Xilinx seemed to have missed and it comes from the SVF TRST statement.
+
LineNumber = 1
def s_ident(scanner, token): return ("ident", token.upper(), LineNumber)
@@ -127,8 +135,13 @@ scanner = re.Scanner([
re.MULTILINE
)
+# open the file using the given encoding
+file = open( sys.argv[1], encoding=file_encoding )
+
# read all svf file input into string "input"
-input = open( sys.argv[1] ).read()
+input = file.read()
+
+file.close()
# Lexer:
# create a list of tuples containing (tokenType, tokenValue, LineNumber)
@@ -368,6 +381,8 @@ run_state_allowed = ('IRPAUSE', 'DRPAUSE', 'RESET', 'IDLE')
enddr_state_allowed = ('DRPAUSE', 'IDLE')
endir_state_allowed = ('IRPAUSE', 'IDLE')
+trst_mode_allowed = ('ON', 'OFF', 'Z', 'ABSENT')
+
enddr_state = IDLE
endir_state = IDLE
@@ -681,6 +696,19 @@ try:
if tokVal != ';':
raise ParseError( tokLn, tokVal, "Expecting ';' after FREQUENCY cycles HZ")
+ elif tokVal == 'TRST':
+ nextTok()
+ if tokVal not in trst_mode_allowed:
+ raise ParseError( tokLn, tokVal, "Expecting 'ON|OFF|Z|ABSENT' after TRST")
+ trst_mode = tokVal
+ nextTok()
+ if tokVal != ';':
+ raise ParseError( tokLn, tokVal, "Expecting ';' after TRST trst_mode")
+ obuf = bytearray( 2 )
+ obuf[0] = XTRST
+ obuf[1] = trst_mode_allowed.index( trst_mode ) # use the index as the binary argument to XTRST opcode
+ output.write( obuf )
+
else:
raise ParseError( tokLn, tokVal, "Unknown token '%s'" % tokVal)
diff --git a/tools/xsvf_tools/xsvfdump.py b/tools/xsvf_tools/xsvfdump.py
index b2e3c7d7..e65f8d5b 100644
--- a/tools/xsvf_tools/xsvfdump.py
+++ b/tools/xsvf_tools/xsvfdump.py
@@ -39,7 +39,8 @@ Xsdrsize = 0
(XCOMPLETE,XTDOMASK,XSIR,XSDR,XRUNTEST,hole0,hole1,XREPEAT,XSDRSIZE,XSDRTDO,
XSETSDRMASKS,XSDRINC,XSDRB,XSDRC,XSDRE,XSDRTDOB,XSDRTDOC,
- XSDRTDOE,XSTATE,XENDIR,XENDDR,XSIR2,XCOMMENT,XWAIT,XWAITSTATE,LCOUNT,LDELAY,LSDR) = range(28)
+ XSDRTDOE,XSTATE,XENDIR,XENDDR,XSIR2,XCOMMENT,XWAIT,XWAITSTATE,
+ LCOUNT,LDELAY,LSDR,XTRST) = range(29)
(RESET,IDLE,
@@ -51,6 +52,10 @@ State = ("RESET","IDLE",
"DRSELECT","DRCAPTURE","DRSHIFT","DREXIT1","DRPAUSE","DREXIT2","DRUPDATE",
"IRSELECT","IRCAPTURE","IRSHIFT","IREXIT1","IRPAUSE","IREXIT2","IRUPDATE")
+
+trst_mode_allowed = ('ON', 'OFF', 'Z', 'ABSENT')
+
+
Setsdrmasks = 0
SetsdrmasksOnesCount = 0
@@ -229,6 +234,14 @@ def ShowOpcode( op, f ):
tdo = bytes2hexString( f, Xsdrsize )
print("LSDR 0x%s 0x%s" % (tdi, tdo) )
+ elif op == XTRST:
+ # the argument is a single byte and it is the index into "trst_mode_allowed"
+ trst_mode = ReadByte(f)
+ if trst_mode <= 3:
+ print("TRST %s" % trst_mode_allowed[trst_mode] )
+ else:
+ print("TRST 0x%02X" % trst_mode );
+
else:
print("UNKNOWN op 0x%02X %d" % (op, op))
exit(1)