summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* ARM11: write_memory() avoids increment checkDavid Brownell2009-11-271-9/+19
| | | | | | | | | | | | When writing to a chip's "reset yourself" register, the ARM11 code was reporting a spurious failure. Just don't bother checking for correctly incremented pointers given single-unit writes ... it's a bit faster that way too. (Reads should likely do the same thing. For that matter, such checks are usually just a waste...) Shrink an overlong parameter name, and associated lines'o'code. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* fix regression causing duplicated outputZachary T Welch2009-11-271-13/+28
| | | | | | | | | | | | | | | | | | | | | | | | The command refactoring caused subcommand handlers to produce duplicate output when run. The problem was introduced by failing to ensure all such invocations went through a top-level "catcher" script, prefixing the command name with the 'ocd_' prefix and consuming its results. The fix is to ensure such a top-level "catcher" script gets created for each top-level command, regardless of whether it has a handler. Indeed, this patch removes all command registrations for sub-commands, which would not have worked in the new registration scheme anyway. For now, dispatch of subcommands continues to be handled by the new 'unknown' command handler, which gets fixed here to strip the 'ocd_' prefix if searching for the top-level command name fails initially. Some Jim commands may be registered with this prefix, and that situation seems to require the current fallback approach. Otherwise, that prefix could be stripped unconditionally and the logic made a little simpler. The same problem must be handled by the 'help' command handler too, so its lookup process works as intended. Overall, the command dispatching remains more complicated than desired, but this patch fixes the immediate regressions.
* zy1000: keep up with new command registration stuffØyvind Harboe2009-11-271-42/+46
| | | | | | jim and classic style commands are both supported. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* update minidummy interface driver command handlingZachary T Welch2009-11-271-1/+1
| | | | | Changes the interface definition field reference from register_commands to commands, which allows the module to compile.
* fix 'nand info' commandZachary T Welch2009-11-271-5/+5
| | | | | | Move device argument parsing after check for number of arguments; otherwise, calling this command without any arguments would access argv[0] before checking whether it even existed.
* zy1000: keep up with changes to log_init()Øyvind Harboe2009-11-271-7/+1
| | | | | | fn's and return value for log_init() changed to void. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* minidummy: fix compilation errorØyvind Harboe2009-11-271-2/+2
| | | | | | during refactoring a search and replace error crept in Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* ARM NAND I/O header documentation update.Dean Glazeski2009-11-261-6/+10
| | | | | | | Fixed the header file to properly specify the doxygen documentation for the items defined in it. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM NAND I/O documentation update.Dean Glazeski2009-11-261-1/+7
| | | | | | | This updates the functions in the file to all have doxygen comments describing what they do. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM NAND I/O refactor code copying.Dean Glazeski2009-11-261-40/+47
| | | | | | | | Created a function for copying code to the working area on a target. The NAND write and read functions are updated to include use of this function. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM NAND I/O read function.Dean Glazeski2009-11-262-1/+91
| | | | | | | | Implementation of the NAND read function for ARM NAND I/O that includes running a local algorithm on a device to increase the performance of block reads. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* NAND Flash documentation update.Dean Glazeski2009-11-261-1/+47
| | | | | | | Updated doxygen comments for different interface structures for the NAND interface. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* XScale: add stub {read,write}_phys routinesDavid Brownell2009-11-261-0/+20
| | | | | | | | | Just make these fail, instead of letting them write over potentially random memory. Users should be able to work around the lack of real implementations by disbling the MMU by hand ... until someone provides a Real Fix. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* update bug reporting informationUwe Hermann2009-11-261-4/+2
| | | | | | The Berlios bug-tracker is disabled, bug reports go to the list. Signed-off-by: Zachary T Welch <zw@superlucidity.net>
* fix typos in documentationUwe Hermann2009-11-265-11/+11
| | | | | | Fixes some minor typos in the top-level documentation files. Signed-off-by: Zachary T Welch <zw@superlucidity.net>
* fix typos in source filesUwe Hermann2009-11-263-8/+8
| | | | | | Correct some spelling errors in source comments and printed output. Signed-off-by: Zachary T Welch <zw@superlucidity.net>
* styleguide: add some embedded style rules.Øyvind Harboe2009-11-261-0/+3
| | | | | | | Embedded and pthreads rely on modest and predictable stack usage. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* fix 'flash protect' and 'flash erase_sector'Eric Wetzel2009-11-261-3/+3
| | | | | | | | Command upgrading introduced two off-by-one bugs in the flash commands. This patch fixes the 'flash {protect,erase_sector}' commands to check that they have been passed the correct number of arguments. Ammended during commit to fix help text for 'erase_address' too.
* target: create and use target_name()David Brownell2009-11-255-24/+34
| | | | | | | | | | | | | Several of the sites now using target_type_name() really ought to be using an instance-specific name. Create a function called target_name(), accessing the instance's own (command) name. Use it in several places that really should be displaying instance-specific names. Also in several places which were already doing so, but which had no wrapper to call. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* target: target_get_name() --> target_type_name()David Brownell2009-11-257-17/+26
| | | | | | | | | | | | | There are two names that may matter on a per-target basis. One is a per-instance name (for example, "at91sam7s.cpu"). The other is the name of its type (for example, "arm7tdmi"), which is shared among multiple targets. Currently target_get_name() returns the type name, which is misleading and is rarely appropriate for target diagnostics. Rename that as target_type_name(). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* omap3530.cfg: yes we have SRAM!David Brownell2009-11-251-0/+3
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: minor armv4/armv5 cleanupDavid Brownell2009-11-251-1/+12
| | | | | | Lines of 300+ characters are still bad; debug tweaks. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: comment tweaks in ADIv5David Brownell2009-11-251-2/+5
| | | | | | "OptimoDE DESS" is ARM's semicustom DSPish stuff. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM7/9: shrink run_algorithm_inner() linesDavid Brownell2009-11-251-2/+10
| | | | | | 300+ characters is unreasonable. So is half that. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* NEWS updatesDavid Brownell2009-11-251-0/+10
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* update NEWS with recent developmentsZachary T Welch2009-11-251-0/+17
| | | | | Mention changes to flash bank command syntax, 'nand verify' command, command error handling and reporting, and help/usage command upgrades.
* use ARRAY_SIZE macroZachary T Welch2009-11-2510-36/+36
| | | | | Search and destroy lingering cases where the ARRAY_SIZE macro should be used to convey more intrinsic meaning in the OpenOCD code.
* support OPENOCD_DEBUG_LEVEL environment settingZachary T Welch2009-11-251-0/+13
| | | | | Detect the OPENOCD_DEBUG_LEVEL setting in log_init(), allowing the very early startup phases to be debugged.
* log: improve initializationZachary T Welch2009-11-253-14/+11
| | | | | | Removes redundant assignment of start_ms from log_register_commands(). Eliminates command_context parameter and return value. Adds Doxygen comment block for this API call.
* update command handler documentationZachary T Welch2009-11-252-18/+83
| | | | | Adds sections on command registration and chaining, giving an overview to developers that want to use these features.
* add 'testee' target typeZachary T Welch2009-11-253-1/+52
| | | | | | | Alliteration aside, this should provide the final piece of the puzzle for developers that want to get started writing a new target type. In this way, it also seeks to complement the 'dummy' interface driver and 'faux' NOR flash driver.
* improve command handling examplesZachary T Welch2009-11-255-5/+62
| | | | | | Removes hello and foo commands from top-level registration. Instead, the dummy interface driver and faux flash driver have been augmented to register these commands as sub-commands.
* add script_command_run helperZachary T Welch2009-11-251-26/+19
| | | | | Eliminates duplicated code in script_command and handle_unknown_command. Fixes bug with duplicated help output generated by placeholder commands.
* encapsulate and re-use log capture, retval setupZachary T Welch2009-11-251-49/+43
| | | | | | | | | Factors log capture while running script commands, eliminating duplicated code between script_command and jim_capture. Factors setting a command's Jim "retval" into a new helper as well. Using these new helpers in the new unknown command handler's fixes possible regressions caused by these bits being missing.
* combine help and usage command handlersZachary T Welch2009-11-251-20/+8
| | | | Remove duplicated handler code by checking the running command name.
* improve usage and help command outputZachary T Welch2009-11-242-44/+38
| | | | | Rewrite formatting code in C, removing last remenants of TCL help code. Sinificantly improves the readability by using smarter indent and wrap.
* allow scripts to update usage informationZachary T Welch2009-11-242-7/+36
| | | | | | The add_usage_text command uses the same C handler, which was updated to support its new polymorphic role. This patch updates the two script commands that needed this support: 'find' and 'script'.
* httpd: use register_commands()Zachary T Welch2009-11-244-20/+51
| | | | | | | Updates httpd_start() to use register_commands() for 'readform' and 'writeform' commands. Adds server/httpd.h to export the new signatures for this function (and httpd_stop), which allows removing the obsoleted declarations inside openocd.c.
* add jim_handler to command_registrationZachary T Welch2009-11-246-83/+146
| | | | | | Adding jim_handler field to command_registration allows removing the register_jim helper. All command registrations now go through the register_command{,s}() functions.
* refactor command_new to use command_registrationZachary T Welch2009-11-241-12/+10
| | | | Save stack space: use a struct. Makes it easier to add new parameters.
* remove register_commands from etm_capture_driverZachary T Welch2009-11-245-31/+17
| | | | | | Converts callback to an array of command_registration records. Moves oocd_trace driver definition to end of file to eliminate useless forward declaration.
* remove target_type register_command callbackZachary T Welch2009-11-2431-149/+89
| | | | | | Uses chaining of command_registration structures to eliminate all target_type register_callback routines. Exports the command_handler registration arrays for those target types that are used by others.
* xscale: use register_commands()Zachary T Welch2009-11-241-23/+107
|
* trace: use register_commands()Zachary T Welch2009-11-241-10/+29
|
* target_request: use register_commands()Zachary T Welch2009-11-241-8/+21
|
* target: use register_commands()Zachary T Welch2009-11-241-104/+201
|
* oocd_trace: use register_commands()Zachary T Welch2009-11-241-10/+32
|
* etm_dummy: use register_commands()Zachary T Welch2009-11-241-7/+20
|
* etm: use register_commands()Zachary T Welch2009-11-241-37/+89
|
* etb: use register_commands()Zachary T Welch2009-11-241-8/+20
|
generated by cgit v1.2.3 (git 2.46.0) at 2024-12-26 15:48:33 +0000