| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2473 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Updates to private TAP state tables in amtjtagaccel interface driver.
The first change is the neccesary one to correct a long-standing bug that
caused the IDCODE to be shifted by one bit too many. This was caused by
an incorrect path from state RESET to state DRSHIFT.
The value of those 2 bytes were 0x8a and 0x04. This means that the
bitstream to do this transition is 0b 00100 01010 (send LSB first). This
will bring you from the reset state to the shift state; however, you
enter the shift-state twice, which explains why the ID-CODE that will be
read next will be shifted 1 bit. The fix changes these to 0x05 and 0x00.
This will send the bitstream 0b 00101 (send LSB first). This will bring
the TAP controller from the RESET state to the DRSHIFT state directly,
without entering the DRSHIFT state twice.
After checking the whole table, two other transitions were found that
could be optimized (5 bits in stead of 10 bits).
Summary off all changes:
From To Old values Old Bitstream New values New Bitstream Remarks
---- ------- ---------- ------------- ---------- ------------- -------
RESET DRSHIFT 0x8a 0x04 0b00100 01010 0x05 0x00 0b00101 1,2
IDLE DRSHIFT 0x85 0x08 0b01000 00101 0x04 0x00 0b00100 2
IDLE IRSHIFT 0x8b 0x08 0b01000 01011 0x06 0x00 0b00110 2
[1] Fixes the IDCODE bug
[2] Optimization
git-svn-id: svn://svn.berlios.de/openocd/trunk@2472 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
|
|
|
|
|
|
| |
Fix intermittent J-Link interface startup failures:
- Use usb_reset to ensure selected dongle is in known good state.
- Assert emulator reset durning status check to prevent supurious failures.
- Eliminate status check loop; not needed due to other fixes.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2471 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2470 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2469 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2468 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
|
|
| |
added correct jtag device id
git-svn-id: svn://svn.berlios.de/openocd/trunk@2467 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
|
|
| |
reset events
git-svn-id: svn://svn.berlios.de/openocd/trunk@2466 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2465 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2464 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2463 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
|
|
|
|
|
|
|
|
| |
- Provide overview of OpenOCD versioning schema.
- Outline responsibilities and authority of the release manager.
- Explain the need for flexibility in the release schedule.
- Add and refine the release process steps.
- Include tutorials for using new release script.
- Many more improvements, too numerous to list.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2462 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2460 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
|
|
| |
Analog Device Eval-ADuC7060 eval board.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2459 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2458 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2457 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2456 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2455 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2454 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2453 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2452 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2451 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
|
|
|
|
|
| |
first was visible by
reading the output, and both were reported in openocd.log
after making the PDF.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2449 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
|
|
|
|
|
|
| |
More minor improvements to README to help polish the 0.2.0 release:
- Add note about Ubuntu 8.04 (in lieu of starting a README.Linux file).
- Fix introductory paragraph to Bulding OpenOCD
- Remove some vestigial texinfo markup.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2448 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Prepare the DaVinci PLL code to support the version 0x0E module
used in newer chips (e.g. dm365): rename the original code so
it's specific to version 0x02 PLL modules, and update the dm355evm
code to use that new name.
Fix two minor bugs in that version 2 code: sysclk3 setup used
the sysclk2 divider address (affecting video processing on dm355,
no worry for now) and sysclk2 setup had a syntax error.
Also minor fixups to dm355evm, mostly to permit use of RTCK.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2447 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
|
|
|
|
| |
Restore some whitespace that got clobbered by over-aggressive
whitepace eradication patches a while back.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2446 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
|
|
|
|
| |
- Fix cosmetic bug on main page
- Add missing JTAG list item.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2445 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2444 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2443 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2442 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2441 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2440 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2439 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2438 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
|
|
|
| |
complement to the standard .tar.gz package. Now, pick your poison!
git-svn-id: svn://svn.berlios.de/openocd/trunk@2437 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add some text to introduce the project to new users.
Move packaging, configuration, and compilation of OpenOCD out of
the User's Guide and into README, where it can be used by users
before configuring and compiling the documentation.
Improve notes about required Subversion repository build steps.
Add reference to the standard GNU INSTALL file.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2436 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
|
|
|
| |
Remove INSTALL file; automake generates a copy of the latest version.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2435 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2434 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2433 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2432 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2431 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2430 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
|
|
|
|
|
|
| |
This patch adds support for the Luminary Micro LM3S9B90 target and
LM3S9B92 Evaluation Kit. These kits include a new ft2232 adapter, the
Luminary In-Circuit Debug Interface (ICDI) Board, so this is added as a
new ft2232 layout called "luminary_icdi".
git-svn-id: svn://svn.berlios.de/openocd/trunk@2429 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add "jtag names" command, mirroring "target names" but returning
TAP names instead of target names. This starts letting TAPs be
manipulated in scripts ... much like what works now for targets.
It's a bit limited just yet, since "jtag cget $TAPNAME" doesn't
expose all TAP attributes. "$TARGETNAME cget" is more functional.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2428 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2427 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2426 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2425 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2424 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
|
|
|
| |
Remove editor configuration from end of file.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2423 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
|
|
| |
git-svn-id: svn://svn.berlios.de/openocd/trunk@2422 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|