summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* gpl: fix GPL startup messageØyvind Harboe2010-02-152-2/+3
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* LPC1768.cfg -- partial fixes for bogus reset-init handlerDavid Brownell2010-02-151-4/+4
| | | | | | | | | Cortex-M targets don't support ARM instructions. Leave the NVIC.VTOR setup alone, but comment how the whole routine looks like one big bug... Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* fix crash with DSP563XXMathias Kuester2010-02-141-0/+25
| | | | | | | | | | | When a DSP563xx-aware GDB asks OpenOCD for target registers, the result should be a GDB with register data ... not an OpenOCD crash. (Note that mainline GDB doesn't currently support this core, so for now, this requires a GDB with FreeScale patches.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* NEWS: mention removal of obsolete commandsDavid Brownell2010-02-131-0/+2
| | | | | | | | | | | | | Removed remaining support for various commands, like advice for migrating old-style TAP declarations. The documentation no longer describes them either ... so if users have been delaying config updates, they may need to consult older releases. ALL this stuff has been clearly marked as "do not use" for at least a year now, so anyone still using it hasn't been holding up their end. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Restore "-dev" version suffix (0.4.0-rc2-dev)David Brownell2010-02-131-1/+1
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* v4.0-rc2 milestoneDavid Brownell2010-02-131-1/+1
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* STR9xpec: issue warning when unlocking deviceSpencer Oliver2010-02-121-0/+8
| | | | | | | Issue warning to user when unlocking or writing the option bytes. The new settings will not take effect until a target reset. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* STM32x: issue warning when unlocking device (bug #16)Spencer Oliver2010-02-121-2/+6
| | | | | | | Issue warning to user when unlocking or writing the option bytes. The new settings will not take effect until a target reset. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* arm720t: virt2phys callback addedØyvind Harboe2010-02-121-4/+14
| | | | | | | | This is a copy and paste of arm926ejs. Not tested, but ready for testing at least. There is a good chance that it will work if the generic armv4_5 fn's are robust enough... Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* arm920: add virt2phys fnMarc Pignat2010-02-121-3/+13
| | | | | | | Copy of the 926ejs function. I have tested it only using my rtems application (where virtual address mapping == physical). Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* target library: configuration files for openocd tested with Atmel SAM-ICE V6 ↵Viktar Palstsiuk2010-02-112-0/+119
| | | | | | JTAG. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* User's Guide: "#" in filesystems names is badDavid Brownell2010-02-101-6/+14
| | | | | | | | Sometimes MS-Windows users try to use filesystem names which include the "#" character. That's generally unwise, since it begins Tcl comments. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* arm11: fix another infinite loop bugØyvind Harboe2010-02-101-4/+23
| | | | | | | | | | | | | reset init would get stuck in an infinite loop when e.g. khz was too high. Added timeout. This is a copy of paste of a number of such bugfixes in the arm11 code. Arm11 code reviewed for further such infinite loop bugs and I couldn't find any more. Xing fingers it's the last one... Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* User's Guide: clarify jtag_rclk adviceDavid Brownell2010-02-101-2/+4
| | | | | | | | | | Not all cores and boards support adaptive clocking, so qualify all advice to use it to depend on core and board support. It's primarily ARM cores which support this; and many of the newer ones (like Cortex-M series) don't. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* target: add todo in target_write_memory() about alignmentØyvind Harboe2010-02-091-2/+13
| | | | | | | target_write_buffer() does not align "buffer" in host memory passed to target_write_memory(). Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* str730.cfg: fix incorrect mem regionsSpencer Oliver2010-02-091-2/+2
| | | | | | - update str73x mem regions to correct values. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* Re-title Developer's GuideDavid Brownell2010-02-061-2/+2
| | | | | | | | | | | | The Doxygen output was previously titled "OpenOCD Reference Manual", which was quite misleading ... the User's Guide is the reference manual which folk should consult about how to use the software. Just rename it to match how it's been discussed previously, and to bring out its intended audience: developers of this software. As a rule, Doxygen is only for folk who work with the code it documents. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ADIv5: doxygenDavid Brownell2010-02-062-32/+138
| | | | | | | | | | | | | | | | | Provide doxygen for many of the public ADIv5 interfaces (i.e. the ones called from Cortex core support code). Add FIXMEs (and a TODO) to help resolve implementation issues which became more apparent when trying to document this code: - Error-prone context-sensitivity (queued/nonqueued) in many procedures. - Procedures that lie by ignoring errors and wrongly claiming success. Also, there was no point in a return from dap_ap_select(); it can't fail, and no caller checks its return status. Clean that up, make it void. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* zy1000: complete zy1000_uart to jim command switchØyvind Harboe2010-02-051-6/+6
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* ARMv7-M: make DAP commands verify target is an ARMv7-MDavid Brownell2010-02-042-3/+31
| | | | | | | | Init the ARMv7-M magic number. Define predicate verifying it. Use it to resolve a lurking bug/FIXME: make sure the ARMv7-M specific DAP ops reject non-ARMv7-M targets. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Documentation: mention bug databaseDavid Brownell2010-02-042-1/+14
| | | | | | | Have the User's Guide and BUG handling notes both reference the fact that we now have a bug database at SourceForge. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* JLink: reference protocol documentationDavid Brownell2010-02-041-0/+4
| | | | | | | Segger publishes some documentation on this protocol; reference it, so future maintainers can know it exists. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* CMD: duplicate cmd error msgSpencer Oliver2010-02-041-1/+4
| | | | | | | | | When registering cmds we report duplicate attempts to register a cmd as a LOG_ERROR. Some situations need this, such as when registering dual flash banks. http://www.mail-archive.com/openocd-development@lists.berlios.de/msg11152.html Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* scripts: Phytec/LPC2350 config scriptsEthan Eade2010-02-042-0/+124
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* JTAG: fix bug when no interface connectedSpencer Oliver2010-02-031-0/+7
| | | | | | - fix coredump when OpenOCD is started without a jtag interface connected. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* AT91R40008/Ethernut 3 configurationHarald Kipp2010-02-022-32/+95
| | | | | | | | | | Moved board specific settings from target/at91r40008.cfg to a new file board/ethernut3.cfg. Set correct CPUTAPID. Reset delay increased, see MIC2775 data sheet. Increased work area size from 16k to 128k. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* NOR: User's Guide updatesDavid Brownell2010-02-021-6/+5
| | | | | | | | | | | | Remove long-obsolete text about "erase_check" affecting "flash info" output. Move parts of that text to "protect_check", where it's still relevant; and update the "flash info" description to mention the issue. (This is still awkward. It might be best to make "protect_check" mirror "erase_check" by dumping what it finds, so "flash info" doesn't dump any potentially-stale cache info.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* tcl/str7x: Reset init unlocks the flashEdgar Grimberg2010-02-022-2/+17
| | | | | | | | | | | For STR7x flash, the device cannot be queried for the protect status. The solution is to remove the protection on reset init. The driver also initialises the sector protect field to unprotected. [dbrownell@users.sourceforge.net: line length shrinkage] Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* flash/str7x: After reset init the flash is unlockedEdgar Grimberg2010-02-022-3/+23
| | | | | | | | | | | | | | The default state of the STR7 flash after a reset init is unlocked. The information in the flash driver now reflects this. The information about the lock status cannot be read from the flash chip, so the user is informed that flash info might not contain accurate information. [dbrownell@users.sourceforge.net: line length shrinkage] Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM semihosting: fix EOF handling with SYS_READNicolas Pitre2010-02-021-1/+1
| | | | | | | | The semihosting interface has a strange convention for read/write where the unused amount of buffer must be returned. We failed to return the total buffer size when the local read() call returned 0. Signed-off-by: Nicolas Pitre <nico@marvell.com>
* Test cases ran on v0.4.0-rc1Edgar Grimberg2010-02-015-0/+4557
| | | | | | | | | | | | | Test cases ran on v0.4.0-rc1 for a number of targets: AT91FR40162 LPC2148 SAM7 STR710 STR912 The goal of the testing session was to prove basic functionality of OpenOCD for different targets. Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>
* gdb: restore behavior from 0.3.1 for srst_asserted and power_restoreØyvind Harboe2010-02-012-15/+46
| | | | | | | | srst_asserted and power_restore can now be overriden to do nothing. By default they will "reset init" the targets and halt gdb. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* ADIv5: more messaging cleanup, docsDavid Brownell2010-01-311-12/+20
| | | | | | | | | When the TAR cache was explicitly invalidated, don't bother printing it; the actual hardware status is more informative. Provide some doxygen for the MEM-AP setup routine. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* build: fix problems with "struct stat" not being defined under eCosØyvind Harboe2010-01-311-0/+1
| | | | | | | Include <sys/stat.h> according to http://www.opengroup.org/onlinepubs/000095399/functions/stat.html Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* telnet: fix strage blank spaces at beginning of telnet linesØyvind Harboe2010-01-311-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | Sometimes we saw two strange blank spaces at the beginning of the telnet lines. progress ogress > This patch fixes this problem: progress progress > The code changes are *reasonably* clean, but perhaps it could be made a bit more elegant, but I didn't want to change things after I finished diagnosis/testing & submitting the patch. The problem was that logging can send the text and the newline separately in two different requests and the telnet code would incorrectly remove the prompt from the end of a line. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* Subject: ADIv5: fix more diagnosticsDavid Brownell2010-01-311-9/+16
| | | | | | | | | | | If the MEM-AP cache is invalid, don't display it; just report that invalidity as an error. (This bug has been observed with "mdw 0 32" after just a "reset halt". Some code is being wrongly bypassed...) If it's valid, display that cache at DEBUG level, not ERROR. Also, don't assume it's an AHB-AP; it could be another flavor of MEM-AP. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ADIv5 error checking for Tcl commandsDavid Brownell2010-01-301-1/+17
| | | | | | | | | Reject invalid AP numbers (256+) as Tcl operation parameters. Shrink one of the overlong lines. Add my copyright to the ADIv5 code (multiple contributions). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM ADIv5: fix diagnostics for block writesDavid Brownell2010-01-301-5/+14
| | | | | | They were reporting "read" errors, not "write" errors. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ADIv5: cleanup, rename swjdp_transaction_endcheck()David Brownell2010-01-293-34/+43
| | | | | | | | | | | | | | | | Make messages reference "DAP" if they're actually transport-agnostic, or "JTAG-DP" when they're JTAG-specific. Saying SWJ-DP is often wrong (on most Cortex-A8 chips) and is confusing even if correct (since we don't yet support SWD). Rename a JTAG-specific routine to jtagdp_transaction_endcheck() to highlight that it's JTAG-specific, and that identify DAP clients undesirably depending on JTAG. (They will all need to change for SWD support.) Shrink a few overlong lines of code. Copy a comment from code removed in a previous patch (for the ARMv7-M "dap baseaddr" command). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARMv7-M: use command handler for "dap baseaddr".David Brownell2010-01-291-30/+1
| | | | | | | | | | Make the ARMv7-M DAP code reuse the command handler for "dap baseaddr". For some reason, this DAP command wasn't converted earlier. This is a code shrink and simplification; it also removes a needless transport dependency on JTAG. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* NOR: cleanup driver declsDavid Brownell2010-01-2918-202/+200
| | | | | | Fix goofy struct indents. Function names *are* their addresses. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Clang buildfixesAlex Austin2010-01-292-1/+11
| | | | | | | | | Building with clang took a few very small changes. The change to helper/log.h is because clang doesn't like an expression where the result is unused. In helper/system.h, I just defined true and false since clang doesn't have them builtin. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* doc clarifications for server flagsDavid Brownell2010-01-282-14/+23
| | | | | | | | | | | | | | | | | | The "-f" is a shortcut for "-c" ... and providing any "-c" options means the "openocd.cfg" file isn't implicitly used. Both the User's Guide and the manual page were weak on these points, which has led to some confusion. Also update the manual page to include highlights of the search path mechanism, including the facts that it exists and that "-s" adds to it. Stop saying only the current directory is involved; the OpenOCD script library is quite significant. (Missing: complete manpage coverage of the search path, including a FILES section listing all components and saying where the script library is found.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM: reference DPM defn from v6/v7 arch specDavid Brownell2010-01-281-0/+6
| | | | | | | | The term "DPM" is probably not well known ("Device Power Management"?), so identify its source in the current ARM architecture specification. It's relevant to ARMv6, ARMv7-A, and ARMv7-R ... but not "M" profiles. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM semihosting: win32 and cygwin fixesSpencer Oliver2010-01-282-16/+32
| | | | | | | | | | | | Cygwin would fail to reopen a previously written file if the mode is not given. Simplified converting the open flags and made sure the win32 O_BINARY bit is set. Added define for systems that do not support O_BINARY. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* ARM semihosting: fix writing to stdoutSpencer Oliver2010-01-282-8/+6
| | | | | | | | SYS_FLEN would be called before a write on a descriptor to check its size. Currently lseek would fail with -1 when given the stdout/stderr descriptor. Changing to use fstat seems to be the standard way of handling this. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* Cortex-M3: report lockup, and recoverDavid Brownell2010-01-271-0/+15
| | | | | | | | | | | | ARMv7-M defines a "lockup" state that's entered in certain double fault sequences which can't be recovered from without external help. OpenOCD has previously ignored this. Issue a diagnostic saying the chip has locked up, and force exit from this state by halting the core. It's not clear this is the best way to handle lockup; but there should now be less confusion. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ARM ADIv5: messaging tweaksDavid Brownell2010-01-271-2/+5
| | | | | | | Add space missing after the invalid ACK value. On init, say which AP is being used, and don't assume it's an AHP-AP. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Cortex-A8: debug messaging tweaksDavid Brownell2010-01-271-5/+6
| | | | | | | Make that "TODO" message say what needs to be done. Say what part of examining failed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* various: don't mention wikiDavid Brownell2010-01-269-19/+16
| | | | | | | The openfacts.berlios wiki isn't particularly current, and isn't publicly editable. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>