summaryrefslogtreecommitdiff
path: root/doc/openocd.texi
Commit message (Collapse)AuthorAgeFilesLines
* tcl: remove silly ocd_ prefix to array2mem and mem2arrayØyvind Harboe2010-08-111-2/+2
| | | | | | | | ocd_ prefix is used internally in OpenOCD as a kludge more or less to deal with the two kinds of commands that OpenOCD has. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* xscale documentation: vector table handlingMike Dunn2010-08-021-4/+22
| | | | | | | | | | | | | | | | | | | | | | | Hi everyone. I noticed some incorrect information in the user manual regarding how the vector table is handled on the xscale, so for your consideration, here's a short patch that corrects it, and adds a little more detail I thought might be helpful. The documentation states that OpenOCD does not attempt to synchronize the vector tables in memory with those stored in the "mini instruction cache". In fact, on each resume it does copy from memory to the cache all entries in the high and low tables that were not previously defined using the 'xscale vector_table' command. (In src/target/xscale.c, see xscale_update_vectors(), which is invoked by xscale_resume().) I take advantage of this during Linux boot-up. The extra detail describes in general terms how I do this. Corrections, comments are of course gratefully received. Thanks, Mike Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
* "transport select" returns Jim valueDavid Brownell2010-07-241-1/+1
| | | | | | | Make it scriptable, so code can be conditionalized based on what transport is in use for the session. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* docs: removed unused cmd 'fast'Spencer Oliver2010-07-201-19/+0
| | | | | | The cmd fast was removed in commit c0d14dc7f19d785702eee5f69de5b1a63902554b Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* docs: missing parameter from nand check_bad_blocksSpencer Oliver2010-07-191-1/+1
| | | | Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* docs: fix transport typoSpencer Oliver2010-07-121-2/+2
| | | | Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* Fix minor openocd.texi bugDavid Brownell2010-07-021-0/+1
| | | | | ::X Signed-off-by: David Brownell <db@helium.(none)>
* initial "transport" frameworkDavid Brownell2010-07-021-1/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the guts of a transport framework with initialization, which should work with current JTAG-only configurations (tested with FT2232). Each debug adapter can declare the transports it supports, and exactly one transport is initialized. (with its commands) in any given OpenOCD session. * Define a new "struct transport with init hooks and a few "transport" subcommands to support it: "list" ... list the transports configured (just "jtag" for now) "select" ... makes the debug session use that transport "init" ... initializes the selected transport (internal) * "interface_transports" ... declares transports the current interface can support. (Some will do this from C code instead, when there are no hardware versioning (or other) issues to prevent it. Plus some FT2232 tweaks, including a few to streamline upcoming support for an SWD transport (initially for Luminary adapters). Eventually src/jtag should probably become src/transport, moving jtag-specific stuff to transport/jtag. Signed-off-by: David Brownell <db@helium.(none)>
* flash: add virtual flash bank driverSpencer Oliver2010-05-261-0/+20
| | | | | | | | | | | | | This adds a virtual flash bank driver that allows virtual banks to be defined that refer to an existing flash bank. For example the real address for bank0 on the pic32 is 0x1fc00000 but the user program will either be in kseg0 (0xbfc00000) or kseg1 (0x9fc00000). This also means that gdb will be aware of all the read only flash addresses. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* Documentation: consistency in GDB command nameMarc Pignat2010-05-111-1/+1
| | | | Always use the complete name of the GDB command, not an abbreviation.
* Documentation : arm920t implements armv4Marc Pignat2010-05-111-1/+1
| | | | There is a small typo in the cpu list, arm920t is armv4.
* flash: stop caching protection stateØyvind Harboe2010-05-051-11/+2
| | | | | | | | | | | | | | There are a million reasons why cached protection state might be stale: power cycling of target, reset, code executing on the target, etc. The "flash protect_check" command is now gone. This is *always* executed when running a "flash info". As a bonus for more a more robust approach, lots of code could be deleted. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* flash: erase_address now has an unlock optionØyvind Harboe2010-05-051-2/+4
| | | | | | | Quite useful to be able to unlock the flash, just like in the flash write_image cmd. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* documentation typoMarc Pignat2010-05-051-1/+1
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* docs: now builds againØyvind Harboe2010-05-051-1/+1
| | | | | | Fix gaffe committed last time. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* docs: improve load_image docsmichal smulski2010-04-201-3/+13
| | | | | | add docs for missing args. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* doc: gdb-attach can fix gdb connect issuesØyvind Harboe2010-04-201-2/+7
| | | | | | | Flash probing must succeed for e.g. gdb load and automatic hardware/software breakpoints to work. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* jtag/tcl.c cleanup -- split out "adapter.c"David Brownell2010-03-271-3/+3
| | | | | | | | | | | | Clean up the jtag/tcl.c file, which was one of the biggest and messiest ones in that directory. Do it by splitting out all the generic adapter commands to a separate "adapter.c" file (leaving the "tcl.c" file holding only JTAG utilities). Also rename the little-used "jtag interface" to "adapter_name", which should have been at least re-categorized earlier (it's not jtag-only). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* DOCS: update flash bank examplesSpencer Oliver2010-03-181-21/+21
| | | | | | - include the $_FLASHNAME in all flash bank examples. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* PIC32MX: add unlock cmdSpencer Oliver2010-03-181-2/+6
| | | | | | | 'unlock' performs a full unlock/erase of the device, removing any code protection. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* SCRIPT: add add_script_search_dir cmdSpencer Oliver2010-03-171-0/+5
| | | | | | | Add a add_script_search_dir cmd so that adding search dir's can be added to cfg scripts. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* MIPS: remove ejtag_srst variantSpencer Oliver2010-03-171-8/+0
| | | | | | | | | | | The mips_m4k_assert_reset has now been restructured so the variant ejtag_srst is not required anymore. The ejtag software reset will be used if the target does not have srst connected. Remove ejtag_srst from docs. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* rename jtag_nsrst_assert_width as adapter_nsrst_assert_widthDavid Brownell2010-03-151-1/+1
| | | | | | | | | | | Globally rename "jtag_nsrst_assert_width" as "adapter_nsrst_assert_width", and move it out of the "jtag" command group ... it needs to be used with non-JTAG transports Includes a migration aid (in jtag/startup.tcl) so that old user scripts won't break. That aid should Sunset in about a year. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* rename jtag_nsrst_delay as adapter_nsrst_delayDavid Brownell2010-03-151-2/+2
| | | | | | | | | | | Globally rename "jtag_nsrst_delay" as "adapter_nsrst_delay", and move it out of the "jtag" command group ... it needs to be used with non-JTAG transports Includes a migration aid (in jtag/startup.tcl) so that old user scripts won't break. That aid should Sunset in about a year. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* rename jtag_khz as adapter_khzDavid Brownell2010-03-151-9/+9
| | | | | | | | | | | Globally rename "jtag_khz" as "adapter_khz", and move it out of the "jtag" command group ... it needs to be used with non-JTAG transports Includes a migration aid (in jtag/startup.tcl) so that old user scripts won't break. That aid should Sunset in about a year. (We may want to update it to include a nag message too.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Add support for Bus Pirate as a JTAG adapter.Michal Demin2010-03-111-0/+3
| | | | | | | | This includes a driver and matching config file. This support needs to be enabled through the initial "configure" (use "--enable-buspirate"). Signed-off-by: Michal Demin <michaldemin@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* split "interface" commands from "jtag" onesDavid Brownell2010-03-111-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | We'll need to be able to work with debug adapter interfaces (drivers) even when they're not used for JTAG ... for example, while there are multi-transport drivers which support JTAG *and* several other transports (or just one more, like SWD) there are also adapters with more limited goals (and no JTAG support at all). Start decoupling the two concepts ("debug adapter driver", "jtag") by having two command groups, which initialize separately. This will help us support OpenOCD sessions using only non-JTAG transports, in which JTAG commands should not be registered. Update docs to mention that the JTAG, SVF, and XSVF commands won't work without a JTAG transport. Note that at least commands working with SRST are still inappropriately coupled to JTAG ... inappropriate because (a) SRST is not part of the JTAG standard, for all that many platforms (like ARM) expect it; and also (b) because they're used with non-JTAG debug and programming interfaces, too. They should perhaps become generic "interface" operations at some point. (Similarly with the clock rate to be used by a given adapter.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* doc: not all debug adapters are "dongles"David Brownell2010-03-051-36/+98
| | | | | | | | | | | | | | | | | Talk more about "debug adapters" instead of only "dongles". Not all adapters are discrete widgets; some are integrated onto boards. If we only talk about "dongles" we rule out many valid setups, and help confuse some users (who may be using Dongle-free environments). Also start bringing out the point that JTAG isn't the only transport protocol, even though OpenOCD historically presumes "all is JTAG". (Not all debug adapters are JTAG adapters, or JTAG-only adapters.) Plus a few minor fixes (spelling etc) in the vicinity of those changes, and updates about FT2232H clocking issues (they can go faster than the older chips, and can support adaptive clocking). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* semihosting: move semihosting cmd to arm cmd groupSpencer Oliver2010-02-281-12/+12
| | | | | | | | | Move semihosting cmd to the arm cmd group. Targets that support semihosting will setup the setup_semihosting callback function. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* CortexM3: move disassemble cmd to arm cmd groupSpencer Oliver2010-02-281-6/+0
| | | | | | | Rather than using a Cortex disassemble cmd, we now use the arm generic version. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* Add board/redbee-usb.cfgMariano Alvira2010-02-281-0/+1
| | | | | | | | | | | The Redbee USB is a small form-factor usb stick from Redwire, LLC (www.redwirellc.com/store), built around a Freescale MC13224V ARM7TDMI + 802.15.4 radio (plus antenna). It includes an FT2232H for debugging, with Channel B connected to the mc13224v's JTAG interface (unusual) and Channel A connected to UART1. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* add board/redbee-econotag.cfg and JTAG supportMariano Alvira2010-02-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | The Redbee Econotag is an open hardware development kit from Redwire, LLC (www.redwirellc.com/store), for the Freescale MC13224V ARM7TDMI + 802.15.4 radio. It includes both an MC13224V and an FT2232H (for JTAG and UART support). It has flexible power supply options. Additional features are: - inverted-F pcb antenna - 36 GPIO brought out to 0.1" pin header (includes all peripheral pins) - Reset button - Two push buttons (on kbi1-5 and kbi0-4) - USB-A connector, powered from USB - up to 16V external input - pads for optional buck inductor - pads for optional 32.768kHz crystal - 2x LEDS on TX_ON and RX_ON [ dbrownell@users.sourceforge.net: shrink lines; texi ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* new "stellaris recover" commandDavid Brownell2010-02-271-0/+15
| | | | | | | | | | | | | | | Stellaris chips have a procedure for restoring the chip to what's effectively the "as-manufactured" state, with all the non-volatile memory erased. That includes all flash memory, plus things like the flash protection bits and various control words which can for example disable debugger access. clearly, this can be useful during development. Luminary/TI provides an MS-Windows utility to perform this procedure along with its Stellaris developer kits. Now OpenOCD users will no longer need to use that MS-Windows utility. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* User's Guide mentions OS-specific installationDavid Brownell2010-02-211-0/+12
| | | | | | | | | | Specifically the Linux issue of needing "udev" rules, and MS-Windows needing driver configuration. Also, update the existing udev note to use the correct name of that rules file in the source tree. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* User's Guide: "#" in filesystems names is badDavid Brownell2010-02-101-6/+14
| | | | | | | | Sometimes MS-Windows users try to use filesystem names which include the "#" character. That's generally unwise, since it begins Tcl comments. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* User's Guide: clarify jtag_rclk adviceDavid Brownell2010-02-101-2/+4
| | | | | | | | | | Not all cores and boards support adaptive clocking, so qualify all advice to use it to depend on core and board support. It's primarily ARM cores which support this; and many of the newer ones (like Cortex-M series) don't. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Documentation: mention bug databaseDavid Brownell2010-02-041-1/+8
| | | | | | | Have the User's Guide and BUG handling notes both reference the fact that we now have a bug database at SourceForge. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* NOR: User's Guide updatesDavid Brownell2010-02-021-6/+5
| | | | | | | | | | | | Remove long-obsolete text about "erase_check" affecting "flash info" output. Move parts of that text to "protect_check", where it's still relevant; and update the "flash info" description to mention the issue. (This is still awkward. It might be best to make "protect_check" mirror "erase_check" by dumping what it finds, so "flash info" doesn't dump any potentially-stale cache info.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* doc clarifications for server flagsDavid Brownell2010-01-281-3/+4
| | | | | | | | | | | | | | | | | | The "-f" is a shortcut for "-c" ... and providing any "-c" options means the "openocd.cfg" file isn't implicitly used. Both the User's Guide and the manual page were weak on these points, which has led to some confusion. Also update the manual page to include highlights of the search path mechanism, including the facts that it exists and that "-s" adds to it. Stop saying only the current directory is involved; the OpenOCD script library is quite significant. (Missing: complete manpage coverage of the search path, including a FILES section listing all components and saying where the script library is found.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* User's Guide secton on target hardware setupDavid Brownell2010-01-211-1/+81
| | | | | | | | | | | Highlight the needs to properly jumper development boards; to make the OpenOCD configuration match the jumpering; and to have a usable "reset-init" method when debugging early boot code. Specific mention of the "ATX Mode" that seems useful on many i.MX boards, forcing NAND boot. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* User's guide: mention lpc2000 checksum issueDavid Brownell2010-01-201-4/+10
| | | | | | | | Folk almost certainly want to have OpenOCD compute the checksum when they modify the vector table. However, that almost guarantees that "verify_image" will fail. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* nand flash support for s3c64xxPeter Korsgaard2010-01-141-1/+2
| | | | | | | | | | | | Identical to the existing 2412/2443 support except for the base address and NFCONF value (bit 2 is reserved and should be written as 1 ref UM). Tested on a s3c6410 board, but controller is identical in 6400/6410 except for 8bit MLC ECC support in 6410 which isn't supported by the driver. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* User's Guide updatesDavid Brownell2010-01-131-23/+88
| | | | | | | | | | | | | | | | Capture various bits of useful information that have come up on the list but haven't yet gotten into the documentation: - Watchdog timers firing during JTAG debug need attention; - Some chips have special registers to help JTAG debug; - Cortex-M3 stepping example with IRQs and maskisr; - Clarifications re adaptive clocking: not all ARMs do it, and explain it a bit better. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* NOR: add optional "flash erase_address" sector paddingDavid Brownell2010-01-131-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a NOR flash mechanism where erase_address ranges can be padded out to sector boundaries, triggering a diagnostic: > flash erase_address 0x0001f980 16 address range 0x0001f980 .. 0x0001f98f is not sector-aligned Command handler execution failed in procedure 'flash' called at file "command.c", line 647 called at file "command.c", line 361 > > flash erase_address pad 0x0001f980 16 Adding extra erase range, 0x0001f800 to 0x0001f97f Adding extra erase range, 0x0001f990 to 0x0001fbff erased address 0x0001f980 (length 16) in 0.095975s (0.163 kb/s) > This addresses what would otherwise be something of a functional regression. An earlier version of the interface had a dangerous problem: it would silently erase data outside the range it was told to erase. Fixing that bug turned up some folk who relied on that unsafe behavior. (The classic problem with interface bugs!) Now they can get that behavior again. If they really need it, just specify "pad". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* FreeBSD build fixesDavid Brownell2010-01-101-3/+4
| | | | | | | | | | Based on notes from Tomek Cedro <tomek.cedro@gmail.com> and Steve Franks <bahamasfranks@gmail.com>. In the User's Guide, sort the list of operating systems reported through Tcl with $ocd_HOSTOS ... and include FreeBSD. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* parport (mostly) doc fixesDavid Brownell2010-01-091-13/+19
| | | | | | | | | | | | | | | | | | | The "parport_port" commands generally don't *require* a port_number; they're of the "apply any parameter, then print result" variety. Update the User's Guide accordingly. Some of those commands are intended to be write-once: parport_port, and parport_cable. Say so. Use proper EBNF for the parport_write_on_exit parameter. Parport address 0xc8b8 is evidently mutant. Say so in the "parport.cfg" file, to avoid breaking anyone with that mutant config. But update the User's Guide to include a sane example for the LP2 port. Finally document the "presto_serial" command. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* src/flash/nor: usage/help/doc updatesDavid Brownell2010-01-091-2/+2
| | | | | | | | | | | | | Make "usage" messages use the same EBNF as the User's Guide; no angle brackets. Improve and correct various helptexts. Don't use "&function"; a function's name is its address. Remove a couple instances of pointless whitespace; shrink a few overlong lines; fix some bad indents. Add TODO list entry re full support for NAND/NOR bank names. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* src/server: usage/help/doc updatesDavid Brownell2010-01-091-4/+4
| | | | | | | | | | | | | | | Make "usage" messages use the same EBNF as the User's Guide; no angle brackets. Improve and correct various helptexts. Specifically for the port commands, clarify that the number is optional, and omitting it causes the current number to be displayed. Don't use "&function"; a function's name is its address. Remove a couple instances of pointless whitespace; shrink a few overlong lines. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* NAND: help/usage/doc updatesDavid Brownell2010-01-081-3/+3
| | | | | | | | | | | | | | Usage messages should use the same EBNF as the User's Guide; no angle brackets. Be more complete too ... some params were missing. Improve and correct various helptexts. Make user's guide refer to the NAND "driver" name, not the controller name; that's a bit more precise. Don't use "&function"; its name is its address. Line up struct initializers properly. Remove some blank lines. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Coexist with quilt: rename PATCHES --> PATCHES.txtDavid Brownell2010-01-081-1/+1
| | | | | | | | | | The issues is on Win32, which ignores case in filesystem and thus doesn't tolerate the quilt "patches" directory. Rename, and add "patches" to .gitignore so that developers can choose to use quilt for local patch management. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>