summaryrefslogtreecommitdiff
path: root/src/jtag
Commit message (Collapse)AuthorAgeFilesLines
* JTAG: simple autoprobingDavid Brownell2009-10-261-12/+102
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds basic autoprobing support for the JTAG scan chains which cooperate. To use, you can invoke OpenOCD with just: - interface spec: "-f interface/...cfg" - possibly with "-c 'reset_config ...'" for SRST/TRST - possibly with "-c 'jtag_khz ...'" for the JTAG clock Then set up config files matching the reported TAPs. It doesn't declare targets ... just TAPs. So facilities above the JTAG and SVF/XSVF levels won't be available without a real config; this is almost purely a way to generate diagnostics. Autoprobe was successful with most boards I tested, except ones incorporating C55x DSPs (which don't cooperate with this scheme for IR length autodetection). Here's what one multi-TAP chip reported, with the "Warn:" prefixes removed: clock speed 500 kHz There are no enabled taps. AUTO PROBING MIGHT NOT WORK!! AUTO auto0.tap - use "jtag newtap auto0 tap -expected-id 0x2b900f0f ..." AUTO auto1.tap - use "jtag newtap auto1 tap -expected-id 0x07926001 ..." AUTO auto2.tap - use "jtag newtap auto2 tap -expected-id 0x0b73b02f ..." AUTO auto0.tap - use "... -irlen 4" AUTO auto1.tap - use "... -irlen 4" AUTO auto2.tap - use "... -irlen 6" no gdb ports allocated as no target has been specified The patch tweaks IR setup a bit, so we can represent TAPs with undeclared IR length. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* JTAG: jtag_tap_init() bugfixesDavid Brownell2009-10-251-9/+18
| | | | | | | Stop allocating three bytes per IR bit, and cope somewhat better with IR lengths over 32 bits. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* jtag: clean up TAP state name handlingDavid Brownell2009-10-233-68/+63
| | | | | | | | | | | | Some cosmetic cleanup, and switch to a single table mapping between state names and symbols (vs two routines which only share that state with difficulty). Get rid of TAP_NUM_STATES, and some related knowledge about how TAP numbers are assigned. Later on, this will help us get rid of more such hardwired knowlege. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* SVF: clean up, mostly for TAP state name handlingDavid Brownell2009-10-233-4/+8
| | | | | | | | | | | | | | | | | | | | | - Use the name mappings all the other code uses: + name-to-state ... needed to add one special case + state-to-name - Improve various diagnostics: + don't complain about a "valid" state when the issue is actually that it must be "stable" + say which command was affected - Misc: + make more private data and code be static + use public DIM() not private dimof() + shorten the affected lines Re the mappings, this means we're more generous in inputs we accept, since case won't matter. Also our output diagnostics will be a smidgeon more informative, saying "RUN/IDLE" not just "IDLE" (emphasizing that there can be side effects). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* XSVF: use svf_add_statemove()David Brownell2009-10-201-23/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | XSVF improvements: - Layer parts of XSVF directly over SVF, calling svf_add_statemove() instead of expecting jtag_add_statemove() to conform to the SVF/XSVF requirements (which it doesn't). This should improve XSTATE handling a lot; it removes most users of jtag_add_statemove(), and the comments about how it should really do what svf_add_statemove() does. - Update XSTATE logic to be a closer match to the XSVF spec. The main open issue here is (still) that this implementation doesn't know how to build and submit paths from single-state transitions ... but now it will report that error case. - Update the User's Guide to mention the two utility scripts for working with XSVF, and to mention the five extension opcodes. Handling of state transition paths is, overall, still a mess. I think they should all be specified as paths not unlike SVF uses, and compiled to the bitstrings later ... so that we can actually make sense of the paths. (And see the extra clocks, detours through RUN, etc.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Removed unused interface_jtag_set_end_state and wrote down some notes on ↵Øyvind Harboe2009-10-203-13/+0
| | | | TCP/IP client/server scheme.
* More svn to git version string fixes.Øyvind Harboe2009-10-201-1/+5
|
* jtag_add_statemove() always uses TLR to get to RESETDavid Brownell2009-10-191-5/+7
| | | | | | | As decided a while back, this isn't a transition we want to chance. Whenever someone wants to got to RESET, force it. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Switch from svn to git version string handling.oyvind2009-10-191-7/+4
|
* portability updatesDavid Brownell2009-10-141-5/+6
| | | | | | | | | Based on some patches from <redirect.slash.nil@gmail.com> for preliminary Win64 compilation. More such updates are needed, but they need work. Compile tested on 64 and 32 bit Linuxes, and Cygwin. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* cosmetic cleanup in TMS tablesDavid Brownell2009-10-131-11/+17
| | | | | | | Cleanup comments and layout/whitespace in the TMS tables. Table contents stayed the same (ignoring whitespace). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* printf format warning fixesDavid Brownell2009-10-101-1/+1
| | | | | | Observed on a Cygwin build. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* add documentation about reset customizationDavid Brownell2009-10-091-10/+19
| | | | | | | | | | We added two overridable procedures; document them, and the two jtag arp_* operations they necessarily expose. Update the comment about the jtag_init_reset() routine; it's been obsolete for as long as it's had SRST support. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* minor JTAG init messaging tweaksDavid Brownell2009-10-081-2/+4
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* prevent abort via polling during jtag_resetDavid Brownell2009-10-082-0/+43
| | | | | | | | | | | | | Observed: openocd: core.c:318: jtag_checks: Assertion `jtag_trst == 0' failed. The issue was that nothing disabled background polling during calls from the TCL shell to "jtag_reset 1 1". Fix by moving the existing poll-disable mechanism to the JTAG layer where it belongs, and then augmenting it to always pay attention to TRST and SRST. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Stop ignoring most scan chain validation errorsDavid Brownell2009-10-082-15/+50
| | | | | | | | | | | | | | | | Among other things this causes startup errors to kick in the fallback "reset harder" logic during server startup. Comments are also updated a bit, explaining what the various error paths signify (in at least my observation). There's one class of validation error that we can still plausibly ignore: when wrong IDCODE values are observed. This change seems to have helped make an OMAP5912 behave much more reliably. There's still some post-reset flakiness, but it's unrelated to scan verification. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Force sane SRST and TRST initializationdbrownell2009-10-071-3/+11
| | | | | | | | | | | At least some FT2232 based adapters don't necessarily come up in the expected state, with SRST and TRST disabled. Since other adapters could suffer the same problem, let's avoid needing to patch every driver and just force *all* adapters to initialize those values properly at server startup. git-svn-id: svn://svn.berlios.de/openocd/trunk@2824 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Better fix for TAPs violating the JTAG spec for IR-Capture.dbrownell2009-10-071-16/+18
| | | | | | | | | | Instead of just assuming all IDCODE-deprived TAPs violate the JTAG spec (they don't!), just require TAPs with such problems to be declared with proper ircapture/irmask values. Example, with mask and value of zero. git-svn-id: svn://svn.berlios.de/openocd/trunk@2823 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Remove much #ifdeffery around _DEBUG_JTAG_IO_ usage.dbrownell2009-10-073-42/+47
| | | | | | | Have DEBUG_JTAG_IO() always trigger necessary warnings. git-svn-id: svn://svn.berlios.de/openocd/trunk@2822 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Updates for "reset_config":dbrownell2009-10-072-14/+95
| | | | | | | | | | | - revert to previous default: don't talk JTAG during SRST - add "srst_nogates" flag, the converse of "srst_gates_jtag" - with no args, display the current configuration And update the User's Guide text with bullet lists to be a bit more clear. git-svn-id: svn://svn.berlios.de/openocd/trunk@2818 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Do not check ir capture if there is no IDCODEoharboe2009-10-071-13/+16
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2812 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* 1.55 snapshotoharboe2009-10-071-1/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2810 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Introduced jtag_init and "jtag arp_init" to allow target scripts more ↵oharboe2009-10-063-13/+27
| | | | | | control over how OpenOCD starts up and initializes the target. git-svn-id: svn://svn.berlios.de/openocd/trunk@2805 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Improve jtag_validate_ircapture() diagnostics.dbrownell2009-10-051-8/+10
| | | | | | | | | | | Bugfix the error message so it shows the disliked value, and add a debug message showing each TAP's IR capture value, all N bits. This just changes diagnostics ... it still ignores the parameters given to us at TAP declaration time. git-svn-id: svn://svn.berlios.de/openocd/trunk@2801 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Add a new JTAG "setup" event; use for better DaVinci ICEpick support.dbrownell2009-10-053-23/+43
| | | | | | | | | | | | | | | | | The model is that this fires after scanchain verification, when it's safe to call "jtag tapenable $TAPNAME". So it will fire as part of non-error paths of "init" and "reset" command processing. However it will *NOT* trigger during "jtag_reset" processing, which skips all scan chain verification, or after verification errors. ALSO: - switch DaVinci chips to use this new mechanism - log TAP activation/deactivation, since their IDCODEs aren't verified - unify "enum jtag_event" scripted event notifications - remove duplicative JTAG_TAP_EVENT_POST_RESET git-svn-id: svn://svn.berlios.de/openocd/trunk@2800 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Streamline Capture-IR validation codedbrownell2009-09-291-26/+23
| | | | | | | | | | | | | | | | | - Don't issue needless JTAG resets ... only do them after errors. Normal exit now leaves every TAP in BYPASS. - Fix an unlikely memory leak on one fault path. - Remove the oddball limitation that invalid capture LSBs trigger errors only for TAPs that support IDCODE. Re the JTAG reset: there are too many of them, and they can (and do!) change system state. So the needless ones should get removed. This one was especially pointless. git-svn-id: svn://svn.berlios.de/openocd/trunk@2777 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Make "-expected-id 0" suppress warnings; not unlike it used to do.dbrownell2009-09-291-3/+7
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2775 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* reentry assertoharboe2009-09-291-0/+7
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2770 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* added t/nsrst_assert_width commandsoharboe2009-09-293-0/+72
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2768 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* if srst pulls trst, then set state to TAP_RESET. oharboe2009-09-281-3/+11
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2767 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Update FT2232 driver so that it reliably enters TAP_RESET.dbrownell2009-09-271-2/+10
| | | | | | | | | | | | | | | | When the OpenOCD server starts up it records its state as TAP_RESET, even though it could be anything. Then when it starts to examine the scan chain, it calls jtag_add_tlr() which sees it doesn't have any work to do, and so it does nothing. This can make the next operations fail because they start from the wrong TAP state... Instead of caring about the current recorded state, always enter TAP_RESET by forcing five clocks with TMS high. (NOTE: it seems most other JTAG adapter drivers have this same bug.) git-svn-id: svn://svn.berlios.de/openocd/trunk@2763 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Diagnostics tweaks for jtag_examine_chain() failure paths.dbrownell2009-09-261-3/+4
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2760 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Updates to the initial scanchain validation code:dbrownell2009-09-261-12/+41
| | | | | | | | | | | - minor bug fixes - code cleanup - update comments - improve diagnostics - etc git-svn-id: svn://svn.berlios.de/openocd/trunk@2759 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Streamline Capture-IR handling and integrity test.dbrownell2009-09-261-12/+22
| | | | | | | | | | | | | | | | | | | | Change the handling of the "-ircapture" and "-irmask" parameters to be slightly more sensible, given that the JTAG spec describes what is required, and that we already require that conformance in one place. IR scan returns some bitstring with LSBs "01". - First, provide and use default values that satisfy the IEEE spec. Existing TAP configs will override the defaults, but those parms are no longer required. - Second, warn if any TAP gets set up to violate the JTAG spec. It's likely a bug, but maybe not; else this should be an error. Improve the related diagnostics to say which TAP is affected. And associated minor fixes/cleanups to comments and diagnostics. git-svn-id: svn://svn.berlios.de/openocd/trunk@2758 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Remove annoying end-of-line whitespace from most src/*dbrownell2009-09-212-17/+17
| | | | | | | files; omitted src/httpd git-svn-id: svn://svn.berlios.de/openocd/trunk@2742 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Update the jtag-examine_chain() logic to verify that there's nodbrownell2009-09-211-38/+39
| | | | | | | | | | | | | | | | garbage after the expected data (from the TAPs' BYPASS or IDCODE registers). NOTE that there was previously some code that looked like it was trying to do this ... which didn't work, because it was looping over the list of expected TAPs, and never checked *after* that list completed! That could hide some *nasty* reset issues... Also replace a now-obsolete scanchain length test with one that behaves correctly; and update reporting of unexpected IDCODEs. git-svn-id: svn://svn.berlios.de/openocd/trunk@2739 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Debug message updates:dbrownell2009-09-202-31/+7
| | | | | | | | | | | | | | | | | | | - Shrink messaging during resets, primarily by getting rid of "nothing happened" noise that hides *useful* information. - Improve: the "no IDCODE" message by identifying which tap only supports BYPASS; and the TAP event strings. Related minor code updates: - Remove two needless tests when examining the chain: we know we have a TAP, and that all TAPs have names. - Clean up two loops, turning "while"s into "for"s which better show what's actually being done. git-svn-id: svn://svn.berlios.de/openocd/trunk@2736 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Minor regression bugfix for the jtag_tap_handle_event() casedbrownell2009-09-201-3/+7
| | | | | | | | for disabling TAPs. We don't actually know how to make any JRCs which do that yet; but when we do, this will matter. git-svn-id: svn://svn.berlios.de/openocd/trunk@2735 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Style cleanup for the updated ft2232_add_pathmove().dbrownell2009-09-191-15/+18
| | | | | | | Indentation, whitespace, line lengths. git-svn-id: svn://svn.berlios.de/openocd/trunk@2731 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Minor behavior fixes for the two JTAG reset events (C/internal,dbrownell2009-09-191-14/+12
| | | | | | | | | | | | | | | | | and Tcl/external): - Reorder so *both* paths (TCK/TMS or TRST) can enable TAPs with ICEpick ... first C code flags TAPs that got disabled, then call any Tcl code that might want to re-enable them. - Always call the C/internal handlers when JTAG operations can be issued; previously that wasn't done when TRST was used. Plus some small cleanups (whitespace, strings, better messaging during debug and on some errors) to reset-related code. git-svn-id: svn://svn.berlios.de/openocd/trunk@2730 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* remove unused externsoharboe2009-09-181-3/+0
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2727 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Address codereview comment from Steve Grubb <sgrubb@redhat.com>:dbrownell2009-09-172-33/+26
| | | | | | | | | | avoid a duplicate test. Plus other cleanup in the same code: be "static", sane line lengths for source and diagnostics, and fix misleading variable names. git-svn-id: svn://svn.berlios.de/openocd/trunk@2725 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* michal smulski <michal.smulski@ooma.com> fix regression in ↵oharboe2009-09-171-18/+30
| | | | | | jtag_add_pathmove() which broke arm11 in r1825. Other uses of jtag_add_pathmove are svn + xsvf + xscale... git-svn-id: svn://svn.berlios.de/openocd/trunk@2722 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* srst_gates_jtag option. at91sam9260 needs retesting, and possibly ↵oharboe2009-09-172-0/+9
| | | | | | srst_gates_jtag added to reset_config. Could i.MX27 be a case where srst does not pull trst, but really srst gates jtag clock? git-svn-id: svn://svn.berlios.de/openocd/trunk@2720 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* tap post reset event added. Allows omap3530 to send 100 runtest idle ↵oharboe2009-09-113-2/+37
| | | | | | tickle's after a TAP_RESET. git-svn-id: svn://svn.berlios.de/openocd/trunk@2696 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - Fix bug-in-waiting when adding more than one TAP event typeoharboe2009-09-091-4/+10
| | | | | | | - Infinite loop bugfix when running tap configure a second time git-svn-id: svn://svn.berlios.de/openocd/trunk@2681 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> Fix segv in jtag_examine_chain(): exit ↵oharboe2009-08-261-6/+8
| | | | | | | | | | | loop on no-tap. Keep "next iteration" step with the rest of the loop overhead. Cleanup: remove spurious whitespace, and an overlong line; only assign "tap->hasidcode" once. git-svn-id: svn://svn.berlios.de/openocd/trunk@2631 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* added missing check on jtag_executeoharboe2009-08-261-1/+4
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2630 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* reduce arm11 output noiseoharboe2009-08-262-3/+7
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2628 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> More jtag_add_reset() cleanup:oharboe2009-08-251-36/+23
| | | | | | | | | Unify the handling of the req_srst parameter, and rip out a large NOP branch and its associated FIXME. (There didn't seem to be anything that needs fixing; but that was unclear since the constraints were scattered all over the place not unified.) git-svn-id: svn://svn.berlios.de/openocd/trunk@2623 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-26 17:44:07 +0000
id='n1619' href='#n1619'>1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166 2167 2168 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180 2181 2182 2183 2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197 2198 2199 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230 2231 2232 2233 2234 2235 2236 2237 2238 2239 2240 2241 2242 2243 2244 2245 2246 2247 2248 2249 2250 2251 2252 2253 2254 2255 2256 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271 2272 2273 2274 2275 2276 2277 2278 2279 2280 2281 2282 2283 2284 2285 2286 2287 2288 2289 2290 2291 2292 2293 2294 2295 2296 2297 2298 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310 2311 2312 2313 2314 2315 2316 2317 2318 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2336 2337 2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2354 2355 2356 2357 2358 2359 2360 2361 2362 2363 2364 2365 2366 2367 2368 2369 2370 2371 2372 2373 2374 2375 2376 2377 2378 2379 2380 2381 2382 2383 2384 2385 2386 2387 2388 2389 2390 2391 2392 2393 2394 2395 2396 2397 2398 2399 2400 2401 2402 2403 2404 2405 2406 2407 2408 2409 2410 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 2423 2424 2425 2426 2427 2428 2429 2430 2431 2432 2433 2434 2435 2436 2437 2438 2439 2440 2441 2442 2443 2444 2445 2446 2447 2448 2449 2450 2451 2452 2453 2454 2455 2456 2457 2458 2459 2460 2461 2462 2463 2464 2465 2466 2467 2468 2469 2470 2471 2472 2473 2474 2475 2476 2477 2478 2479 2480 2481 2482 2483 2484 2485 2486 2487 2488 2489 2490 2491 2492 2493 2494 2495 2496 2497 2498 2499 2500 2501 2502 2503 2504 2505 2506 2507 2508 2509 2510 2511 2512 2513 2514 2515 2516 2517 2518 2519 2520 2521 2522 2523 2524 2525 2526 2527 2528 2529 2530 2531 2532 2533 2534 2535 2536 2537 2538 2539 2540 2541 2542 2543 2544 2545 2546 2547 2548 2549 2550 2551 2552 2553 2554 2555 2556 2557 2558 2559 2560 2561 2562 2563 2564 2565 2566 2567 2568 2569 2570 2571 2572 2573 2574 2575 2576 2577 2578 2579 2580 2581 2582 2583 2584 2585 2586 2587 2588 2589 2590 2591 2592 2593 2594 2595 2596 2597 2598 2599 2600 2601 2602 2603 2604 2605 2606 2607 2608 2609 2610 2611 2612 2613 2614 2615 2616 2617 2618 2619 2620 2621 2622 2623 2624 2625 2626 2627 2628 2629 2630 2631 2632 2633 2634 2635 2636 2637 2638 2639 2640 2641 2642 2643 2644 2645 2646 2647 2648 2649 2650 2651 2652 2653