summaryrefslogtreecommitdiff
path: root/src/target/target.h
Commit message (Collapse)AuthorAgeFilesLines
* Pavel Chromy's on chip flash loaderoharboe2008-04-231-0/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@612 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Added checks for target->type->read/write_memory, soft_reset_halt and ↵oharboe2008-04-151-0/+4
| | | | | | run_algorithm that the target has been examined. git-svn-id: svn://svn.berlios.de/openocd/trunk@581 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Reset wip. Just adding hooks. This is just to reduce the size of the actual ↵oharboe2008-04-111-0/+3
| | | | | | change, no change in behaviour. git-svn-id: svn://svn.berlios.de/openocd/trunk@565 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* added target->type->examine(). Eventually this will allow for bringing up ↵oharboe2008-04-111-1/+15
| | | | | | telnet/gdb *before* jtag chain has been validated + it might fix some reset halt problems seen as examine() needs to run after TRST has been asserted. git-svn-id: svn://svn.berlios.de/openocd/trunk@563 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added "init" command. "init" and "reset" at end of startup script is ↵oharboe2008-04-091-8/+5
| | | | | | | | | | | | | | | equivalent to daemon_startup(still supported). - print warning if srst and trst change state at the same time when srst_and_trst is seperate - reset now performs a trst, examines and validates the jtag chain before targets assert reset - if startup fails to examine and validate the jtag chain, try a reset before trying again git-svn-id: svn://svn.berlios.de/openocd/trunk@552 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - Work on fixing erase check. Many implementations are plain broken.oharboe2008-04-031-2/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | Wrote a default flash erase check fn which uses CFI's target algorithm w/fallback to memory reads. - "flash info" no longer prints erase status as it is stale. - "flash erase_check" now prints erase status. erase check can take a *long* time. Work in progress - arm7/9 with seperate srst & trst now supports reset init/halt after a power outage. arm7/9 no longer makes any assumptions about state of target when reset is asserted. - fixes for srst & trst capable arm7/9 with reset init/halt - prepare_reset_halt retired. This code needs to be inside assert_reset anyway - haven't been able to get stm32 write algorithm to work. Fallback flash write does work. Haven't found a version of openocd trunk where this works. - added target_free_all_working_areas_restore() which can let be of restoring backups. This is needed when asserting reset as the target must be assumed to be an unknown state. Added some comments to working areas API - str9 reset script fixes - some guidelines - fixed dangling callbacks upon reset timeout git-svn-id: svn://svn.berlios.de/openocd/trunk@536 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Michael Bruck: fixed warningsoharboe2008-03-131-2/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@514 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - adds two speeds to jtag_speed. reset and post reset speed. Defaultoharboe2008-03-131-1/+8
| | | | | | | | | | is post reset = reset speed. - removed infinite loop's and exit()'s upon poor arm7/9 communication - cleaned up error messages a bit. Push ERROR() up into fn's that fail and can say something meaningful about what failed. git-svn-id: svn://svn.berlios.de/openocd/trunk@511 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - the jtag chain is examined and validated after GDB & telnet serversoharboe2008-03-101-1/+9
| | | | | | | | | | | | | | | | | | are up and running. The examination and validation is actually "optional" from the point of view of GDB + telnet servers. Multiple targets should work fine with this. - jtag_speed is dropped(divisor is increased), if jtag examination and validation fails. - the chain is validated 10x to catch the worst jtag_speed offences - added LOG_SILENT that can be used to shut up log. Feeble ersatz for try+catch. - GDB register packets are now always replied in order to make sure that GDB connect works. If the target is not halted, then these packets contain dummy values. git-svn-id: svn://svn.berlios.de/openocd/trunk@483 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - Improves error handling upon GDB connectoharboe2008-03-071-2/+1
| | | | | | | | | | | | | | | | | | - switch to synchronous halt during connect. This fixes the bug where poll() was not invoked between halt() and servicing the 'g' register packet - halt() no longer returns error code when target is already halted, just logs a warning. Only the halt() implementation can say anything meaningful about why a halt() failed, so error messages are pushed up to halt() - fixed soft_reset_halt infinite loop bug in arm7_9_common.c. The rest of the implementations are still busted. - by using USER() instead of command_print() the log gets the source + line #. Nice. - no longer invoke exit() if soft_reset_halt fails. A reset can often fix the problem. git-svn-id: svn://svn.berlios.de/openocd/trunk@475 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* * fixed malloc corruption in target->debug_reasonoharboe2008-03-051-1/+2
| | | | | | | | | | | | | | | * GDB remote server will now remain online even if the target is in a funny state, e.g. if it requires a reset, it is running while GDB is not in the continue or step packet, e.g. via monitor resume/halt commands in GDB script. * Added some _DEBUG_GDB_IO_ debug tools * Fixed a couple of GDB server lockups, e.g. when O packets detect a severed connection * added ACK upon connection (send +). * added keep-alive messages to reset so GDB protocol remains happy. * fixed crash when timing out connection to GDB git-svn-id: svn://svn.berlios.de/openocd/trunk@445 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* some comments from Dominicoharboe2008-03-031-1/+10
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@434 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - "flash write_binary" is now "flash write_bank" to clarify the focus of theoharboe2008-02-251-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | command and reduce confusion with "flash write_image". - retired deprecated "flash erase" & "flash write". - added flash_driver_protect/write/erase() that are wafer thin frontend functions to low level driver functions. They implement checks that were inconsistently handled by the drivers, e.g. check for target halted was done in a spotty fashion. - use return ERROR_COMMAND_SYNTAX_ERROR to print out syntax of command instead of having lots of inlined replicas of the command line syntax(some of which were wrong). - use logging instead of dubious translation of error values to human understandable explanations of why things failed. The lower levels log the precise reason and the higher levels can ammend context as the error propagates up the call stack. - simplified flash API slightly with logging instead of allocating and returning information that the caller then has to translate into print statements. git-svn-id: svn://svn.berlios.de/openocd/trunk@337 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - fixed target->type->poll() return valueoharboe2008-02-241-3/+4
| | | | | | | | | | | - added arch_state to show status of currently selected target - simplified target->type->arch_state() api. - clean up telnet output a bit - fixed GDB output for arch_state - removed a couple of unecessary exit()'s - cleaned up error propagation a bit in a few places git-svn-id: svn://svn.berlios.de/openocd/trunk@332 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - Fixed bug in pathmove for XScalentfreak2008-02-191-1/+8
| | | | | | | | | | | | | | | - added virtual address to working_area. - Improved error messages in a number of places - Added ERROR_COMMAND_SYNTAX_ERROR that commands can return to have syntax printed - Added help for some config commands - Added verification of sw breakpoints with ERROR() message - Removed a couple of exit()'s and replaced with error message - cosmetic fix to armv4_5.c, easier to read - added polymorphic(with default) virt2phys and mmu enable query function to target.h - added virt2phys command that uses target->type->virt2phys() fn Thanks to Øyvind Harboe git-svn-id: svn://svn.berlios.de/openocd/trunk@310 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added synchronous reset patch, Thanks Øyvind Harboentfreak2008-02-071-0/+1
| | | | | | - added target_init_reset which calls target_process_reset after all drivers have been initialised git-svn-id: svn://svn.berlios.de/openocd/trunk@284 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - add support for cortex_m3 target_request debugmsgsntfreak2008-01-171-0/+1
| | | | | | - target request handler disabled by default until a target has been registered git-svn-id: svn://svn.berlios.de/openocd/trunk@259 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - minimum autoconf 2.59 is now required and verified - due to issues with ↵ntfreak2007-12-291-0/+2
| | | | | | | | | | | | | | | | | | | | AS_HELP_STRING - native win32 now handles WSAECONNRESET - no longer exits openocd - qCRC packet now works correctly under cygwin (gdb compare-sections command) - removed __USE_GNU define from gdbserver.c - gdb qSupported packet is now handled, with this we are able to tell gdb packet size, memory map of target - added new target script gdb_program_config - called before gdb flash programming - new gdb server command gdb_memory_map (enable|disable> - default is disable - new gdb server command gdb_flash_program (enable|disable> - default is disable - gdb flash programming supported - vFlash packets - image_elf_read_section now does not clear any remaining data, this was causing the gdb checksum to fail with certain files - reformat of usbprog.c - memory leak in command_print fixed - updated texi doc to include new commands - added gdb programming section to docs git-svn-id: svn://svn.berlios.de/openocd/trunk@246 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - add verify_image commandntfreak2007-10-221-0/+3
| | | | | | - add support for gdb qCRC packet (compare-sections command) git-svn-id: svn://svn.berlios.de/openocd/trunk@210 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - cleaned up str7, str9 and stm32 flash driversntfreak2007-10-081-0/+1
| | | | | | | | | | | - str7 flash driver now checks correct busy bits depending on device - str9 flash driver now disables ITCM order as per st programming manual - added str7 disable_jtag command - added gdb_detach command - updated arm966e cp15 support - fix crash on mingw build when enabling target_request debugmsgs git-svn-id: svn://svn.berlios.de/openocd/trunk@209 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - renamed M5960 USB JTAG to "flyswatter"drath2007-08-101-1/+7
| | | | | | | | | | | | | | | | | | | | - make ep93xx and at91rm9200 bitbang JTAG interfaces dependant on ARM host (thanks to Vincent Palatin) - various whitespace fixes - removed various warnings - add support for Debian GNU/kFreeBSD (thanks to Uwe Hermann) - fix OpenOCD compilation for various platforms (thanks to Uwe Hermann and Vincent Palatin) - switched order of JTAG chain examination and validation (examine first, then multiple validation tries even if examination failed) - added target_request subsystem to handle requests from the target (debug messages and tracepoints implemented, future enhancements might include semihosting, all ARM7/9 only for now) - added support for GDB vFlashXXX packets (thanks to Pavel Chromy) - added support for receiving data via ARM7/9 DCC - reworked flash writing. the 'flash write' command is now deprecated and replaced by 'flash write_binary' (old syntax and behaviour) and 'flash write_image' (write image files (bin, hex, elf, s19) to a target). - added support for AMD/ST/SST 29F400B non-cfi flashes git-svn-id: svn://svn.berlios.de/openocd/trunk@190 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - explicitly disable monitor mode on ARM7/9 targetsdrath2007-04-161-0/+1
| | | | | | | | - added "prepare_reset_halt()" to target_type_t, which allows reset_halt to be prepared before a reset is asserted, possibly preventing communication with the target - arm7/9 devices now use a breakpoint at 0x0 or reset vector catching for debug out of reset git-svn-id: svn://svn.berlios.de/openocd/trunk@141 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - merged XScale branch back into trunkdrath2007-03-281-6/+8
| | | | | | | | | - fixed some compiler warnigns in amt_jtagaccel.c, bitbang.c, parport.c - free working area and register stuff if str7x block write algorithm failed - check PC after exiting a target algorithm in armv4_5.c git-svn-id: svn://svn.berlios.de/openocd/trunk@135 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added support for the oocd-link ↵drath2006-11-071-2/+2
| | | | | | | | | (http://www.joernonline.de/dw/doku.php?id=en:projects:oocdlink) - fixed breakpoint handling (this changes the target_t interface) git-svn-id: svn://svn.berlios.de/openocd/trunk@113 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - endianess fixes everywhere but in the flash code. flashing might still be ↵drath2006-08-311-0/+7
| | | | | | | | | | | | | | | | | broken on big-endian targets and/or hosts - added access to ARM920T vector catch register (via generic register mechanism) - don't disable linefills on ARM920T cores - this lead to lockups when accessing lines already contained in cache - read content of ARM920T cache and tlb into file (arm920t read_flash/read_mmu commands) - memory reading improved on ARM7/9, can be further accelerated with new "arm7_9 fast_memory_access enable" command (renamed from fast_writes) - made in_handler independent from in field (makes the handler more flexible) - added timeout to ft2232 when using D2XX library - fixed STR7x protection bit handling on second bank (thanks to Bernard) - added support for using the OpenOCD on AT91RM9200 systems (thanks to Anders Larsen) - fixed AT91SAM7 flash handling when not running from 32kHz clock (thanks to Anders Larsen) git-svn-id: svn://svn.berlios.de/openocd/trunk@90 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - added support for AT91SAM7A3 flash (patch from andre renaud, thanks)drath2006-06-231-0/+5
| | | | | | | | | | - fix trunk build for mac os x (patch from Lauri Leukkunen, thanks) - added check for host endianness, defines WORDS_BIGENDIAN on a big-endian host (e.g. mac os-x) - fixed bug where endianness of memory accesses could be swapped on BE hosts - added space for zero termination of ftd2xx_layout string (from Magnus Ludin, tahnks) git-svn-id: svn://svn.berlios.de/openocd/trunk@73 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - prepare OpenOCD for branching, created ./trunk/drath2006-06-021-0/+231
git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-28 06:01:33 +0000