summaryrefslogtreecommitdiff
path: root/src
Commit message (Collapse)AuthorAgeFilesLines
* Alexei Babich <a.babich@rez.ru> imx31 nand flash controller supportoharboe2009-09-104-2/+1004
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2685 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Alexei Babich <a.babich@rez.ru> fix problems with unecessary tailend byte ↵oharboe2009-09-101-0/+12
| | | | | | accesses. Use 16 bit access on tailend of a memory read if possible. git-svn-id: svn://svn.berlios.de/openocd/trunk@2684 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Rolf Meeser <rolfm_9dq@yahoo.de> oharboe2009-09-092-6/+44
| | | | | | | This patch adds target algorithm support for those flash devices that do not support DQ5 polling. So far they could only be programmed with host algorithm, but this was way too slow. git-svn-id: svn://svn.berlios.de/openocd/trunk@2682 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - Fix bug-in-waiting when adding more than one TAP event typeoharboe2009-09-091-4/+10
| | | | | | | - Infinite loop bugfix when running tap configure a second time git-svn-id: svn://svn.berlios.de/openocd/trunk@2681 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> oharboe2009-09-095-8/+27
| | | | | | | | | | | | | | | | | Optionally shave time off the armv4_5 run_algorithm() code: let them terminate using software breakpoints, avoiding roundtrips to manage hardware ones. Enable this by using BKPT to terminate execution instead of "branch to here" loops. Then pass zero as the exit address, except when running on an ARMv4 core. ARM7TDMI, ARM9TDMI, and derived cores now set a flag saying they're ARMv4. Use that mechanism in arm_nandwrite(), for about 3% speedup on a DaVinci ARM926 core; not huge, but it helps. Some other algorithms could use this too (mostly flavors of flash operation). git-svn-id: svn://svn.berlios.de/openocd/trunk@2680 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Report correct core instruction state for ARMv/A targetsmlu2009-09-081-1/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2678 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Load PC with bit 0 set to 1 when resuming to say in Thumb instruction state.mlu2009-09-081-2/+7
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2677 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> oharboe2009-09-081-0/+86
| | | | | | | | Provide an "armv7a disassemble" command. Current omissions include VFP (except as coprocessor instructions), Neon, and various Thumb2 opcodes that are not available in ARMv7-M processors. git-svn-id: svn://svn.berlios.de/openocd/trunk@2676 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> oharboe2009-09-081-35/+137
| | | | | | | | | | | | | | | | | | | | | lean up some loose ends with the ARM disassembler - Add a header comment describing its current state and uses and referencing the now-generally-available V7 arch spec - Support some mode switch instructions: * Thumb to Jazelle (BXJ) * Thumb to ThumbEE (ENTERX) * ThumbEE to Thumb (LEAVEX) - Improve that recent warning fix (and associated whitespace goof) - Declare the rest of the internal code and data "static". A compiler may use this, and it helps clarify the scope of these routines (e.g. what changes to them could affect). git-svn-id: svn://svn.berlios.de/openocd/trunk@2675 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Improved handling of instruction set state, helps for debugging Thumb state.mlu2009-09-071-7/+5
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2674 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Mahr, Stefan <Stefan.Mahr@sphairon.com> removes the endianness swapping in ↵oharboe2009-09-041-44/+0
| | | | | | mips_m4k.c Swapping is already done in target.c git-svn-id: svn://svn.berlios.de/openocd/trunk@2673 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Matt Hsu <matt@0xlab.org> This patch simply enables the halting debug mode.oharboe2009-09-041-0/+7
| | | | | | | By enabling this bit, the processor halts when a debug event such as breakpoint occurs. git-svn-id: svn://svn.berlios.de/openocd/trunk@2668 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* more debug output for breakpointsoharboe2009-09-041-2/+10
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2667 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Matt Hsu <matt@0xlab.org> Tidy up the bit-offset operation for DSCR registeroharboe2009-09-042-6/+15
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2666 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownelloharboe2009-09-036-74/+191
| | | | | | | | | | | | | | | | Abstract the orion_nand_fast_block_write() routine into a separate routine -- arm_nandwrite() -- so that other ARM cores can reuse it. Have davinci_nand do so. This faster than byte-at-a-time ops by a factor of three (!), even given the slowish interactions to support hardware ECC (1-bit flavor in that test) each 512 bytes; those could be read more efficiently by on-chip code. NOTE that until there's a generic "ARM algorithm" structure, this can't work on newer ARMv6 (like ARM1136) or ARMv7A (like Cortex-A8) cores, though the downloaded code itself would work just fine there. git-svn-id: svn://svn.berlios.de/openocd/trunk@2663 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - fixes the incorrect info msg displayed during stellaris flash programming.ntfreak2009-09-011-2/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2660 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - fix a regression when using cortex_m3 emulated dcc channelntfreak2009-09-011-10/+19
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2659 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Warning fixduane2009-08-311-0/+3
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2658 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> Minor code bugfix: check right variable.oharboe2009-08-301-1/+1
| | | | | | | | | Via code review by Steve Grubb <sgrubb@redhat.com>  Almost innocuous; this is value is checked later, this check being wrong would make it check stack garbage. git-svn-id: svn://svn.berlios.de/openocd/trunk@2655 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Dirk Behme <dirk.behme@googlemail.com> Fix typo in help text. It has to be ↵oharboe2009-08-301-1/+1
| | | | | | 'production_test' instead of 'production' here. git-svn-id: svn://svn.berlios.de/openocd/trunk@2654 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> Fix Sandstorm revision checking: right ↵oharboe2009-08-301-1/+1
| | | | | | bits, right value! git-svn-id: svn://svn.berlios.de/openocd/trunk@2653 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> Remove duplicate check for flash write ↵oharboe2009-08-301-21/+19
| | | | | | | | | | | | status. Via code review by Steve Grubb <sgrubb@redhat.com>  Also minor fixes for the message from "fill": the byte count is unsigned, not signed; and more importantly, print the real number of bytes written git-svn-id: svn://svn.berlios.de/openocd/trunk@2652 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> start phasing out integers as target IDsoharboe2009-08-306-59/+54
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2650 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> Be sure the built-in search paths ↵oharboe2009-08-304-7/+8
| | | | | | | | | | | | always go *after* ones provided on the command line ... matching comment in add_default_dirs(). Without this it's impossible to use a private config file which happens to have the same name as an installed one. Say, because you're bugfixing a private copy... git-svn-id: svn://svn.berlios.de/openocd/trunk@2649 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> fix warningsoharboe2009-08-281-4/+8
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2648 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* added arm11 timeout error messagesoharboe2009-08-283-11/+94
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2647 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* restore ICE watchpoint registers when the *last* software breakpoint is removedoharboe2009-08-282-3/+23
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2646 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> ARM disassembly support for about five ↵oharboe2009-08-281-6/+345
| | | | | | | | | | | | | | | | | | dozen non-Thumb instructions that were added after ARMv5TE was defined: - ARMv5J "BXJ" (for Java/Jazelle) - ARMv6 "media" instructions (for OMAP2420, i.MX31, etc) Compile-tested. This might not set up the simulator right for the ARMv6 single step support; only BXJ branches though, and docs to support Jazelle branching are non-public (still, sigh). ARMv6 instructions known to be mis-handled by this disassembler include: UMAAL, LDREX, STREX, CPS, SETEND, RFE, SRS, MCRR2, MRRC2 git-svn-id: svn://svn.berlios.de/openocd/trunk@2644 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* arm11 hardware step using simulation + breakpoint. Use "hardware_step ↵oharboe2009-08-271-19/+28
| | | | | | enable" command to revert to hardware stepping. Ideally we could retire the "hardware_step enable" command once we no longer believe it to be necessary. git-svn-id: svn://svn.berlios.de/openocd/trunk@2643 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* arm11 single stepping wip - at least we know the next PC nowoharboe2009-08-271-0/+4
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2642 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* arm11 single stepping wipoharboe2009-08-271-0/+101
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2641 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* refactor arm simulator to allow arm11 code to use it as well - no observable ↵oharboe2009-08-272-49/+147
| | | | | | changes otherwise. git-svn-id: svn://svn.berlios.de/openocd/trunk@2640 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Matt Hsu <matt@0xlab.org> and Holger Hans Peter Freyther <zecke@selfish.org> ↵oharboe2009-08-261-5/+23
| | | | | | | | | cortex-a8: Wait for the CPU to be halted/started With DCCR we are asking the CPU to halt, we should wait until the CPU has halted before proceeding with the operation. git-svn-id: svn://svn.berlios.de/openocd/trunk@2638 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Matt Hsu <matt@0xlab.org> and Holger Hans Peter Freyther <zecke@selfish.org> ↵oharboe2009-08-261-1/+1
| | | | | | Print the value that the method didn't like git-svn-id: svn://svn.berlios.de/openocd/trunk@2637 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Matt Hsu <matt@0xlab.org> and Holger Hans Peter Freyther <zecke@selfish.org> ↵oharboe2009-08-261-1/+1
| | | | | | | | Only dap_ap_select when we are going to do a memory access in the fast reg case. git-svn-id: svn://svn.berlios.de/openocd/trunk@2636 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Matt Hsu <matt@0xlab.org> cortex-a8: Copy some more registers from the ↵oharboe2009-08-261-0/+8
| | | | | | documentation git-svn-id: svn://svn.berlios.de/openocd/trunk@2635 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Matt Hsu <matt@0xlab.org> cortex_a8_exec_opcode is writing the ARM ↵oharboe2009-08-261-1/+9
| | | | | | | | | | | instruction into the ITR register but it will only be executed when the DSCR[13] bit is set. The documentation is a bit weird as it classifies the DSCR as read-only but the pseudo code is writing to it as well. This is working on a beagleboard. git-svn-id: svn://svn.berlios.de/openocd/trunk@2634 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Matt Hsu <matt@0xlab.org> Wait for the DTRRX to be full before reading it. ↵oharboe2009-08-261-4/+9
| | | | | | Remove the trans_mode change as it is done in the mem_ap_read_atomic_u32 function. git-svn-id: svn://svn.berlios.de/openocd/trunk@2633 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Matt Hsu <matt@0xlab.org> and Holger Hans Peter Freyther <zecke@selfish.org> ↵oharboe2009-08-261-0/+8
| | | | | | | | | | Before executing a new instruction wait for the previous instruction to be finished. This comes from the pseudo code of the cortex a8 trm. git-svn-id: svn://svn.berlios.de/openocd/trunk@2632 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> Fix segv in jtag_examine_chain(): exit ↵oharboe2009-08-261-6/+8
| | | | | | | | | | | loop on no-tap. Keep "next iteration" step with the rest of the loop overhead. Cleanup: remove spurious whitespace, and an overlong line; only assign "tap->hasidcode" once. git-svn-id: svn://svn.berlios.de/openocd/trunk@2631 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* added missing check on jtag_executeoharboe2009-08-261-1/+4
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2630 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Remove bogus "BUG:". If the PC is pointing to an invalid instruction, then ↵oharboe2009-08-261-2/+2
| | | | | | simulation will fail. This is expected. git-svn-id: svn://svn.berlios.de/openocd/trunk@2629 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* reduce arm11 output noiseoharboe2009-08-262-3/+7
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2628 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> Clock updates/fixes for the Stellaris ↵oharboe2009-08-262-19/+143
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | flash driver: - Bugfixes: * internal osc: it's *12* MHz (not 15 MHz) on _current_ chips + except new Tempest parts where it's 16 MHz (and calibrated!) + or some old Sandstorm ones, where 15 MHz was valid * crystal config: + read and use the crystal config, don't assume 6 MHz + know when that field is 4 bits vs 5 * an RCC2 register may be overriding the original RCC + more clock source options + bigger dividers + fractional dividers on Tempest (NYET handled) * there's a 30 KHz osc on newer chips (for deep sleep) * there's a 32768 Hz osc on newer chips (for hibernation) - Cosmetic * say "rev A0" not "vA.0", to match vendor docs * don't always report master clock as an "estimate": + give the error bound if it's approximate, like "±30%" + else don't say anything * fix whitespace and caps in some messages * these are not AT91SAM chips!! Those clock issues might explain problems sometimes reported when writing to Stellaris flash banks; they affect write timings. That 12-vs-15 MHz issue is problematic; there's no consolidated doc showing which chips (and revs!) have which internal oscillator speed. It's clear that only older silicon had the faster-and-less-accurate flavor. What's less clear is which chips are "old" like that. Lightly tested, on a DustDevil part. git-svn-id: svn://svn.berlios.de/openocd/trunk@2626 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> Tweak disassembly commands:oharboe2009-08-252-28/+55
| | | | | | | | | | | | | | | | | | For ARMv4/ARMv5: - better command parameter error checking - don't require an instruction count; default to one - recognize thumb function addresses - make function static - shorten some too-long lines For Cortex-M3: - don't require an instruction count; default to one With the relevant doc updates. --- Nyet done: invoke the thumb2 disassembler on v4/v5, to better handle branch instructions. git-svn-id: svn://svn.berlios.de/openocd/trunk@2624 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> More jtag_add_reset() cleanup:oharboe2009-08-251-36/+23
| | | | | | | | | Unify the handling of the req_srst parameter, and rip out a large NOP branch and its associated FIXME. (There didn't seem to be anything that needs fixing; but that was unclear since the constraints were scattered all over the place not unified.) git-svn-id: svn://svn.berlios.de/openocd/trunk@2623 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> More jtag_add_reset() cleanup:oharboe2009-08-251-17/+18
| | | | | | | | Unify the handling of the req_tlr_or_trst parameter. Basically, JTAG TMS+TCK ops ("TLR") is always used ... unless TRST is a safe option in this system configuration. git-svn-id: svn://svn.berlios.de/openocd/trunk@2622 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> Some jtag_add_reset() cleanup:oharboe2009-08-251-42/+62
| | | | | | | | | | | | | | | | | | | | | | | - Track whether TRST and/or SRST actually change: * If they're not changing, don't ask the JTAG adapter to do anything! (JTAG TCK/TMS ops might still be used to enter TAP_RESET though.) * Don't change their recorded values until after the adapter says it did so ... so fault paths can't leave corrupt state. * Detect and report jtag_execute_queue() failure mode * Only emit messages saying what really changed; this includes adding an omitted "deasserted TRST" message. * Only apply delays after deasserting SRST/TRST if we *DID* deassert! - Messages say "TLR" not "RESET", to be less confusing; there are many kinds of reset. (Though "TLR" isn't quite ideal either, since it's the name of the TAP state being entered by TMS+TCK or TRST; it's at least non-ambiguous in context.) So the main effect is to do only the work this routine was told to do; and to have debug messaging make more sense. git-svn-id: svn://svn.berlios.de/openocd/trunk@2621 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net> Accomodate targets which don't support ↵oharboe2009-08-251-0/+12
| | | | | | | | | | | | various target-specific reset operations. Maybe they can't; or it's a "not yet" thing. Note that the assert/deassert operations can't yet trigger for OMAP3 because resets currently include JTAG reset in all cases, resetting the ICEpick and thus disabling the TAP for Cortex-A8. git-svn-id: svn://svn.berlios.de/openocd/trunk@2620 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - fix build warningsntfreak2009-08-253-19/+19
| | | | | | - add svn props to recently added files armv7a.[ch] git-svn-id: svn://svn.berlios.de/openocd/trunk@2618 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3 (git 2.46.0) at 2024-11-09 17:23:21 +0000