summaryrefslogtreecommitdiff
path: root/src
Commit message (Collapse)AuthorAgeFilesLines
...
* Remove error_handler_t type definition; it was unused in the tree.zwelch2009-05-291-2/+0
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@1943 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Add documentation to flash.h:zwelch2009-05-291-12/+245
| | | | | | | | | - provides low-level information about each flash API interface, - gives driver authors some documentation about the driver interface, - updated extensively from the original patch provided by Duane Ellis. git-svn-id: svn://svn.berlios.de/openocd/trunk@1942 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Fix potentialyl unaligned memory accesses in mflash driver.zwelch2009-05-271-2/+3
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@1935 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Author: Nicolas Pitre <nico@cam.org>kc8apf2009-05-271-0/+7
| | | | | | | - cut out the "unknown EmbeddedICE version" message with Feroceon git-svn-id: svn://svn.berlios.de/openocd/trunk@1934 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Author: Nicolas Pitre <nico@cam.org>kc8apf2009-05-272-1/+22
| | | | | | | | - Silence errors about keep_alive() not being called frequently enough unless a gdb session is active or debugging is enabled git-svn-id: svn://svn.berlios.de/openocd/trunk@1933 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* unsik Kim <donari75@gmail.com>:zwelch2009-05-272-23/+66
| | | | | | | Add large bank write/dump support in mflash driver. git-svn-id: svn://svn.berlios.de/openocd/trunk@1931 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* unsik Kim <donari75@gmail.com>:zwelch2009-05-272-11/+501
| | | | | | | Add mflash configuration code, updating relevant documentation. git-svn-id: svn://svn.berlios.de/openocd/trunk@1930 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* unsik Kim <donari75@gmail.com>:zwelch2009-05-272-14/+0
| | | | | | | Remove unused mflash driver 'prove' field. git-svn-id: svn://svn.berlios.de/openocd/trunk@1929 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* unsik Kim <donari75@gmail.com>:zwelch2009-05-272-27/+5
| | | | | | | Remove unused mflash bank command options. git-svn-id: svn://svn.berlios.de/openocd/trunk@1928 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* unsik Kim <donari75@gmail.com>:zwelch2009-05-271-13/+13
| | | | | | | Change prefix of mflash driver routines to mg_. git-svn-id: svn://svn.berlios.de/openocd/trunk@1927 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* SimonQian <simonqian@SimonQian.com>:zwelch2009-05-271-14/+30
| | | | | | | This patch allows the vsllink to support very large scan sizes in DMA mode. git-svn-id: svn://svn.berlios.de/openocd/trunk@1926 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* - add support for cortino jtag interfacentfreak2009-05-271-1/+46
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@1925 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Update build system to find moved scripts -- Step 3 of 2:zwelch2009-05-275-13/+18
| | | | | | | | | | | | - Update references from using PKGLIBDIR to PKGDATADIR. - Update built-in script search paths to reflect new install location: - $(pkgdatadir) => $(pktdatadir)/site - $(pkglibdir) => $(pktdatadir)/scripts - Update installed location of httpd files: - $(pkglibdir)/httpd => $(pkgdatadir)/httpd git-svn-id: svn://svn.berlios.de/openocd/trunk@1920 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Move TCL script files -- Step 2 of 2:zwelch2009-05-27133-5629/+0
| | | | | | | | - Move src/tcl to tcl/. - Update top Makefile.am to use new path name. git-svn-id: svn://svn.berlios.de/openocd/trunk@1919 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Move TCL script files -- Step 1 of 2:zwelch2009-05-27117-29/+0
| | | | | | | | | | | | | - Move src/target/{interface,target,board,test}/ into src/tcl/ - Remove existing rules in src/Makefile.am and src/target/Makefile.am. - Add Makefile.am handling of *.cfg and *.tcl files in top Makefile.am: - Add dist-hook to include such files under src/tcl in the distribution. - Add install-data-hook to install contents of '$(top_srcdir)/src/tcl/'. - Add uninstall-hook to remove the installed script files. - Change paths to (un)install script files in '$(pkgdatadir)/scripts'. git-svn-id: svn://svn.berlios.de/openocd/trunk@1918 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* SimonQian <simonqian@SimonQian.com>, reported by R.Doss:zwelch2009-05-261-0/+21
| | | | | | | | | This patch fixes a segfault when TDO was not received in XXR command: - allocate space for the value and mask anyway - clear the mask to zero to effectively skip the output comparison step git-svn-id: svn://svn.berlios.de/openocd/trunk@1915 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* SimonQian <simonqian@SimonQian.com>:zwelch2009-05-261-10/+24
| | | | | | | | Add svf_get_mask_u32 to generate a mask according to bitlen. Fix this bug in other functions except for svf_check_tdo. git-svn-id: svn://svn.berlios.de/openocd/trunk@1914 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Author: Simon Qian <simonqian@SimonQian.com>kc8apf2009-05-251-1/+29
| | | | | | | - add tap_state_svf_name since tap_state_name doesn't use SVF standard names git-svn-id: svn://svn.berlios.de/openocd/trunk@1912 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Author: Raúl Sánchez Siles <rsanchezs@infoglobal.es>kc8apf2009-05-251-2/+4
| | | | | | | - cfi flash_address coding style fix git-svn-id: svn://svn.berlios.de/openocd/trunk@1911 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net>:zwelch2009-05-242-3/+4
| | | | | | | | | | | | | | | Doc (mostly) update for jtag_khz: - switch to @deffn syntax - add entry for "jtag_rclk" - move deprecated "jtag_speed" into collection of deprecated calls And for ft2232, don't be the only adapter to *log* an error if RTCK is requested; it's already reported properly, like any other nonfatal command parameter. "jtag_rclk" just works as expected, without any scarey messages. git-svn-id: svn://svn.berlios.de/openocd/trunk@1910 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net>:zwelch2009-05-243-9/+7
| | | | | | | | | | | | | | | | | | | | | | | Make startup for the various server ports be quiet, unless debugging is active: don't emit needless scarey messages. Update the relevant documentation and its references: - For these port commands ... cover the default values; convert to @deffn syntax; include their use outside of the configuration stage; and alphabetize. Similar updates to the rest of that small chapter: - Highlight that there even *IS* a configuration stage, after which some command functionality is no longer available. - For GDB commands ... convert to @deffn syntax; alphabetize; include a missing command (!); add missing helptext (!) for one non-missing command; update relevant cross-references and index entries. git-svn-id: svn://svn.berlios.de/openocd/trunk@1909 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net>:zwelch2009-05-241-1/+1
| | | | | | | | | The "Illegal mode for command" diagnostic is deeply useless. Say "Command '%s' only runs during configuration stage" instead, letting users know what the real issue is. git-svn-id: svn://svn.berlios.de/openocd/trunk@1908 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net>: minor davinci_nand bugfixzwelch2009-05-241-2/+4
| | | | | | | | | | Fix a bug that joined us at the last minute, when an efficient alloca() call got swapped out for a more portable malloc(). Also log one error, to give a clue in case it appears "in the wild". git-svn-id: svn://svn.berlios.de/openocd/trunk@1907 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Added the options calc_checksum to the flash driver.mifi2009-05-241-1/+1
| | | | | | | This was forgotten here. All other LPC targets use this option. git-svn-id: svn://svn.berlios.de/openocd/trunk@1906 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Nicolas Pitre <nico@cam.org>: Update sheevaplug interface script:zwelch2009-05-241-0/+6
| | | | | | | | | When the CPU is in the WFI state, the JTAG interface simply doesn't respond at all and initial tap examination simply fails. Let's simply do it again when we come around to assert nSRST. git-svn-id: svn://svn.berlios.de/openocd/trunk@1905 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net>:zwelch2009-05-242-35/+76
| | | | | | | | | | | | | | | | | | | | | | | | | Update two oddball NAND commands to work with {offset, length} instead of block numbers, matching the other commands as well as usage in U-Boot and the Linux-MTD utilities. Document them accordingly. Update the single in-tree use of those commands (sheevaplug). ALSO: (a) Document the current 2 GByte/chip ceiling for NAND chipsize. (32 bit offset/length values can't represent 4 GBytes.) Maybe after the upcoming release, the code can switch to 64-bits. (b) The "nand check_bad_blocks" should report "bad" blocks. They are not "invalid" blocks; they're "bad" ones. (c) Tweak the "nand info" command to handle the "no arguments" case sanely (show everything, instead of showing garbage) and not listing the blocksize in hex kbytes (duh). git-svn-id: svn://svn.berlios.de/openocd/trunk@1904 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net>:zwelch2009-05-244-3/+757
| | | | | | | | | | | | | | | | | | NAND support for DaVinci-family drivers, with HW ECC support. Declare the NAND chip on the DM355 EVM board. Currently tested on DM355 for Linux interop using the standard large page (2KB) chip in the EVM socket; "hwecc1" and "hwecc4" work fine. (Using hwecc4 relies on patches that haven't quite made it through the Linux-MTD bottlenecks yet.) Not yet tested: 1-bit on small-page (although it's hard to see how that could fail); 4-bit on small page (picky layout issues); the "hwecc_infix" mode (primarily for older boot ROMs; testing there is blocked on having new bootloader code). git-svn-id: svn://svn.berlios.de/openocd/trunk@1903 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* SimonQian <simonqian@SimonQian.com>:zwelch2009-05-241-20/+23
| | | | | | | | | Changes svf_check_tdo function (checks tdo output matches desired values): - call buf_cmp_mask function to do comparison instead of using a loop. - fixes a bug when data length is equal to sizeof(int). git-svn-id: svn://svn.berlios.de/openocd/trunk@1900 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Freddie Chopin <freddie_chopin@op.pl>:zwelch2009-05-243-1/+14
| | | | | | | - add reset delay settings for LPC2103, LPC2124, and LPC2129. git-svn-id: svn://svn.berlios.de/openocd/trunk@1899 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Submitted by Magnus Lundin <lundin@mlu.mine.nu>:zwelch2009-05-231-4/+0
| | | | | | | - Remove FTDI driver tap_set_state call; performed by jtag_add_reset. git-svn-id: svn://svn.berlios.de/openocd/trunk@1893 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Submitted by Magnus Lundin <lundin@mlu.mine.nu>:zwelch2009-05-231-1/+2
| | | | | | | | | - Add jtag_execute_queue in jtag_add_reset after interface_jtag_add_reset. - Use tap_set_state to demark TAP_RESET, instead of cmd_queue_cur_state - cmd_queue_cur_state needs to be retired. git-svn-id: svn://svn.berlios.de/openocd/trunk@1892 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Change the setting for the sam7se512 and sam7x256 mifi2009-05-232-3/+4
| | | | | | flash driver because of the new at91sam7 version. git-svn-id: svn://svn.berlios.de/openocd/trunk@1890 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Submitted by Magnus Lundin <lundin@mlu.mine.nu>:zwelch2009-05-231-21/+100
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Updates to the J-Link interface driver to support more device versions: - Add capability detection: - if capable, detect protocol version; otherwise, assume v2 protocol. - if capable, detect buffer size; otherwise, assume minimal. - Disable command result queries for devices using v2 protocol. - Defined and use JTAG2 command with v2 protocol; JTAG3 is v3 protocol. - Add TCL command to allow explicit setting of J-Link protocol version. With approval, I revised the patch to make the following changes: - add static keywords to new jlink-specific variables - factor calculation of major_version to be more readable - remove braces around simple one-line statements in if/else clauses - remove (rather than #if 0) duplicate reset code; it is in SVN - use &function to be clearer when passing function pointers - add symbols for EMU_CMD_GET_CAPS bits; do not hard-code constants! - almost renamed jlink_handle_jlink_hw_jtag_command (seriously?!?!) - rewrote that function using a switch statement. - made version request processing easier to understand and modify - improve alternate endpoint detection: - make code easier to read by using temporary variables - eliminate extra level of indentation and redundant logging - use ternary conditional to select JTAG2 or JTAG3 command - reverse version test in jlink_usb_message to reduce indentation - this had the biggest effect in cleaning up this patch - use C99's ability to declare new/changed variables with less scope - add spaces around binary operators in new/changed code - revert other superfluous whitespace/comment style changes git-svn-id: svn://svn.berlios.de/openocd/trunk@1889 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* More printf fixes stemming from format string change in r1882.zwelch2009-05-231-2/+3
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@1888 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Author: Raúl Sánchez Siles <rsanchezs@infoglobal.es>kc8apf2009-05-221-2/+20
| | | | | | | - Fix multi-byte reads on x16 devices used as x8 git-svn-id: svn://svn.berlios.de/openocd/trunk@1886 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Author: Raúl Sánchez Siles <rsanchezs@infoglobal.es>kc8apf2009-05-221-2/+4
| | | | | | | - Fix calculation of flash_address for x16 devices used as x8 git-svn-id: svn://svn.berlios.de/openocd/trunk@1885 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Author: Raúl Sánchez Siles <rsanchezs@infoglobal.es>kc8apf2009-05-221-4/+4
| | | | | | | - Consistently use flash_address git-svn-id: svn://svn.berlios.de/openocd/trunk@1884 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Author: David Brownell <david-b@pacbell.net>kc8apf2009-05-221-28/+3
| | | | | | | | | | | | | | | | | Remove un-implemented and dubious "nand copy" command. Doing this efficiently would mean doing the copying on the target CPU, instead of back and forth through JTAG. If anyone ever needs this functionality, that's what they should implement. Also, update on-line "help" for "nand dump" to display its two optional flags; and for "nand write" to display a recently added flag. git-svn-id: svn://svn.berlios.de/openocd/trunk@1883 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Author: Rick Altherr <kc8apf@kc8apf.net>kc8apf2009-05-222-3/+3
| | | | | | | - printf conversion fixes for variably-sized types git-svn-id: svn://svn.berlios.de/openocd/trunk@1882 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Submitted by David Brownell <david-b@pacbell.net>:zwelch2009-05-223-1/+314
| | | | | | | | | | | | | | | | | | | | | | | | Improve support for the DM355 EVM board, and eventually other boards based on DaVinci chips: - Provide generic "davinci.cfg" to hold utilities that can be reused by different chips in this family. Start with PINMUX, PSC, and PLL setup. - DM355 chip support updates: provide a dictionary with chip-specific symbols, load those utilities. - Create a new dm355evm board file, with a reset-init event handler which uses those utilities to set up PLLs and clocks, configure the pins, and improve the JTAG speed limit. Also a minor tweak: provide a virtual address for the work area, matching what the very latest kernels do. It's probably unwise to use OpenOCD while the MMU is active though. The DRAM isn't yet accessible, but NAND access is mostly ready. git-svn-id: svn://svn.berlios.de/openocd/trunk@1881 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Submitted by Dean Glazeski <dnglaze@gmail.com>:zwelch2009-05-222-40/+173
| | | | | | | Add doxygen comments in arm7_9_common source and header files. git-svn-id: svn://svn.berlios.de/openocd/trunk@1880 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* delete unused codeoharboe2009-05-211-26/+0
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@1878 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* fix warning. Use %p for pointersoharboe2009-05-211-1/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@1877 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Author: Michael Bruck <mbruck@digenius.de>kc8apf2009-05-211-2/+7
| | | | | | | | | | -jtag.c, interface_jtag_add_ir_scan() [2/2] (version without goto): - change 'found' to bool - add comments on loops git-svn-id: svn://svn.berlios.de/openocd/trunk@1876 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Dirk Behme <dirk.behme@googlemail.com> Minor updates for OMAP3 scriptsoharboe2009-05-212-0/+20
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@1875 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Additional format warning fixes in ioutil, required by r1873 changes.zwelch2009-05-211-2/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@1874 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* David Brownell <david-b@pacbell.net>: This patch adds annotations tozwelch2009-05-2110-24/+34
| | | | | | | | | | the key command_*() helper functions, fixng the bugs that turned up. Several of these bugs were from misuse of PRIi64; that's for 64-bit integers, NOT for "long long" or "u64" (which work best with %lld). git-svn-id: svn://svn.berlios.de/openocd/trunk@1873 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Author: Thomas Kindler <mail@t-kindler.de>kc8apf2009-05-211-1/+1
| | | | | | | - Increase DTC status retry count to avoid problems with STM Primer git-svn-id: svn://svn.berlios.de/openocd/trunk@1871 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Author: Øyvind Harboe <oyvind.harboe@zylin.com>kc8apf2009-05-211-0/+8
| | | | | | | - Allow target_read/write_buffer of size 0 git-svn-id: svn://svn.berlios.de/openocd/trunk@1870 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Author: Holger Schurig <hs4233@mail.mn-solutions.de>kc8apf2009-05-211-2/+0
| | | | | | | -Prevent freezing of target when doing a 'shutdown'. git-svn-id: svn://svn.berlios.de/openocd/trunk@1869 b42882b7-edfa-0310-969c-e2dbd0fdcd60