summaryrefslogtreecommitdiff
path: root/src
Commit message (Collapse)AuthorAgeFilesLines
...
* jtag: get rid of unecessary jtag_get_end_state()Øyvind Harboe2010-03-191-12/+21
| | | | | | By code inspection. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* jtag: remove unecessary usage of jtag_get_end_state().Øyvind Harboe2010-03-191-2/+2
| | | | | | By code inspection. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* jtag: remove jtag_get_end_state()'s that should be unecessaryØyvind Harboe2010-03-195-6/+6
| | | | | | | | By a bit of code inspection it seems like all of these instances of jtag_get_end_state() can be unambigously replaced by constants. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* Fix underlying problem with xscale icache and dcache commandsMike Dunn2010-03-181-6/+11
| | | | | | | | | | | | | | | | | | | | Fix problem with the xscale icache and dcache commands. Both commands were enabling or disabling the mmu, not the caches I didn't look any further after my earlier patch fixed the trivial problem with command argument parsing. Turns out the underlying code was broken. The resolution is straightforward when you look at the arguments to xscale_enable_mmu_caches() and xscale_disable_mmu_caches(). I finally took a deeper look after dumping the cp15 control register (XSCALE_CTRL) and seeing that the cache bits weren't changing, but the mmu bit was (which caused all manner of grief, as you can imagine). This has been tested and works OK now. src/target/xscale.c | 17 +++++++++++------ 1 files changed, 11 insertions(+), 6 deletions(-) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ADI_v5 - it's not always an "SWJ-DP"David Brownell2010-03-182-175/+175
| | | | | | | So don't use the name "swjdp" for all DAPs; rename to plain old "dap", which *is* always correct. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Merge branch 'master' of ↵David Brownell2010-03-1813-73/+74
|\ | | | | | | ssh://dbrownell@openocd.git.sourceforge.net/gitroot/openocd/openocd
| * jtag: retire one instance of jtag_get_end_state() usageØyvind Harboe2010-03-1813-73/+74
| | | | | | | | | | | | Less global variables.... Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* | remove more duplicationDavid Brownell2010-03-181-25/+0
|/ | | | | | | | Not sure how the original "move code to adi_v5_swd.c" patch left some code in the "arm_adi_v5.c" file, but a recent patch was only a partial fix -- it didn't remove all the duplication. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* oops: committed and pushed two temp files....Øyvind Harboe2010-03-182-3962/+0
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* PIC32MX: add unlock cmdSpencer Oliver2010-03-182-0/+77
| | | | | | | 'unlock' performs a full unlock/erase of the device, removing any code protection. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* MIPS: remove unused arg from mips_ejtag_set_instrSpencer Oliver2010-03-185-51/+51
| | | | | | This arg was never used and was just taken from the arm jtag code. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* jtag: cut down on usage of unintended modification of global end stateØyvind Harboe2010-03-1824-99/+4062
| | | | | | | | | | | | | jtag_get/set_end_state() is now deprecated. There were lots of places in the code where the end state was unintentionally modified. The big Q is whether there were any places where the intention was to modify the end state. 0.5 is a long way off, so we'll get a fair amount of testing. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* linker error: fix problem with duplicate fnØyvind Harboe2010-03-181-33/+0
| | | | | | | | | | | A fn was copied instead of moved to a new file. The linker can discard exact copies of fn's without warning. This is a C++'ism. However on my Ubuntu 9.10 machine, it fails. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* mips: fix warningØyvind Harboe2010-03-171-1/+1
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* gdb: long running "monitor mww" now works w/gdbØyvind Harboe2010-03-171-0/+2
| | | | | | | invoke keep_alive() to make sure that the default 2000ms timeout does not trigger. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* target: faster mww operationsØyvind Harboe2010-03-171-38/+77
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* target: mdX/mwX on target were badly brokenØyvind Harboe2010-03-171-7/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - incorrect parsing of arguments - mdX didn't display arguments correctly I don't think anyone ever used that code path :-) Did you know that "target mdw" and mdw are very different? for {set i 0} {$i < 256} {set i [expr $i+1]} {mwb [expr 0x2000000+$i] $i} mdw 0x2000000 0x10 0x02000000: 03020100 07060504 0b0a0908 0f0e0d0c 13121110 17161514 1b1a1918 1f1e1d1c 0x02000020: 23222120 27262524 2b2a2928 2f2e2d2c 33323130 37363534 3b3a3938 3f3e3d3c > zy1000.cpu mdb 0x2000000 0x20 0x02000000 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f ................ 0x02000010 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f ................ > zy1000.cpu mdh 0x2000000 0x20 0x02000000 0100 0302 0504 0706 0908 0b0a 0d0c 0f0e ................ 0x02000010 1110 1312 1514 1716 1918 1b1a 1d1c 1f1e ................ 0x02000020 2120 2322 2524 2726 2928 2b2a 2d2c 2f2e !"#$%&'()*+,-./ 0x02000030 3130 3332 3534 3736 3938 3b3a 3d3c 3f3e 0123456789:;<=>? > zy1000.cpu mdw 0x2000000 0x20 0x02000000 03020100 07060504 0b0a0908 0f0e0d0c ................ 0x02000010 13121110 17161514 1b1a1918 1f1e1d1c ................ 0x02000020 23222120 27262524 2b2a2928 2f2e2d2c !"#$%&'()*+,-./ 0x02000030 33323130 37363534 3b3a3938 3f3e3d3c 0123456789:;<=>? 0x02000040 43424140 47464544 4b4a4948 4f4e4d4c @ABCDEFGHIJKLMNO 0x02000050 53525150 57565554 5b5a5958 5f5e5d5c PQRSTUVWXYZ[\]^_ 0x02000060 63626160 67666564 6b6a6968 6f6e6d6c `abcdefghijklmno 0x02000070 73727170 77767574 7b7a7978 7f7e7d7c pqrstuvwxyz{|}~. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* SCRIPT: add add_script_search_dir cmdSpencer Oliver2010-03-171-0/+17
| | | | | | | Add a add_script_search_dir cmd so that adding search dir's can be added to cfg scripts. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* PIC32: add software reset supportSpencer Oliver2010-03-174-3/+61
| | | | | | | | | The PIC32MX does not support the ejtag software reset - it is optional in the ejtag spec. We perform the equivalent using the microchip specific MTAP cmd's. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* MIPS: remove ejtag_srst variantSpencer Oliver2010-03-172-17/+17
| | | | | | | | | | | The mips_m4k_assert_reset has now been restructured so the variant ejtag_srst is not required anymore. The ejtag software reset will be used if the target does not have srst connected. Remove ejtag_srst from docs. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* gdb_server: improved gdb load performanceØyvind Harboe2010-03-171-8/+37
| | | | | | | | | | | by ack'ing memory writes immediately and reporting either at next memory write or stepi/continue time. GDB will then send off a new packet that is ready by the time the previous packet has been written to target memory. On faster adapters this can be as much as 10% improvement. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* zy1000: tweak the DCC inner loop a tiny bitØyvind Harboe2010-03-171-5/+8
| | | | | | Uses FIFO a bit more efficiently now. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* arm7/9: remove unused post_restore_contextØyvind Harboe2010-03-1710-20/+0
| | | | | | | Unused. If something should happen after context restore, then the calling code can just do it afterwards. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* ADIv5 transport support moves to separate filesDavid Brownell2010-03-165-430/+589
| | | | | | | | | | | | | | | | | | | Unclutter arm_adi_v5.c by moving most transport-specific code to a transport-specific files adi_v5_{jtag,swd}.c ... it's not a full cleanup, because of some issues which need to be addressed as part of SWD support (along with implementing the DAP operations on top of SWD transport): - The mess where mem_ap_read_buf_u32() is currently coded to know about JTAG scan chains, and thus needs rewriting before it will work with SWD; - Initialization is still JTAG-specific Also move JTAG_{DP,ACK}_* constants from adi_v5.h to the JTAG file; no other code should care about those values. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* bitbang: add jtag_add_tms_seq supportØyvind Harboe2010-03-166-0/+33
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* lpc3180: LPC3180(LPC3250) SLC driver implementedrichard vegh2010-03-162-9/+441
| | | | | | | | | | | | | | | | Until this time only basic SLC functionality exists when you want to use SLC to access external nand flash. Basic functionality can be selected with command: lpc3180 select 0 slc It is anyway very slow to write/read to/from nand flash. With the new command, SLC speed improved about 20 times, and hardware ECC info also read/written from/to nand flash OOB area: lpc3180 select 0 slc bulk Speed improvement achieved by using working are in SRAM of the LPC3250 chip and controlling DMA controller to interact between SRAM and SLC peripheral. Here are the patches, and if they are ok than take them. Tested with hitex LPC3250 usb stick. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* image loading: fix problem with offsets > 0x80000000Bradey Honsinger2010-03-164-4/+4
| | | | | | | | | | | | | | | Fixes bug that prevented users from specifying a base address of 0x80000000 or higher in image commands (flash write_image, etm image, xscale trace_image). image.base_address is an offset from the start address contained in the image file (if there is one), or from 0 (for binary files). As a signed 32-bit int, it couldn't be greater than 0x7fffffff, which is a problem when trying to write a binary file to flash above that address. Changing it to a 64-bit long long keeps it as a signed offset, but allows it to cover the entire 32-bit address space. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* move "reset_config" out of JTAG command groupDavid Brownell2010-03-151-11/+11
| | | | | | | | | | | | The SRST configuration options are not specific to JTAG, so this command may be needed with non-JTAG debug sessions. Just move the command to a different group. (The TRST options are, however, clearly JTAG-specific, but for compatibility, they're now left alone. The flags they control could later be disabled in non-JTAG sessions.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* rename jtag_nsrst_assert_width as adapter_nsrst_assert_widthDavid Brownell2010-03-153-15/+17
| | | | | | | | | | | Globally rename "jtag_nsrst_assert_width" as "adapter_nsrst_assert_width", and move it out of the "jtag" command group ... it needs to be used with non-JTAG transports Includes a migration aid (in jtag/startup.tcl) so that old user scripts won't break. That aid should Sunset in about a year. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* rename jtag_nsrst_delay as adapter_nsrst_delayDavid Brownell2010-03-153-14/+15
| | | | | | | | | | | Globally rename "jtag_nsrst_delay" as "adapter_nsrst_delay", and move it out of the "jtag" command group ... it needs to be used with non-JTAG transports Includes a migration aid (in jtag/startup.tcl) so that old user scripts won't break. That aid should Sunset in about a year. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* rename jtag_khz as adapter_khzDavid Brownell2010-03-155-18/+28
| | | | | | | | | | | Globally rename "jtag_khz" as "adapter_khz", and move it out of the "jtag" command group ... it needs to be used with non-JTAG transports Includes a migration aid (in jtag/startup.tcl) so that old user scripts won't break. That aid should Sunset in about a year. (We may want to update it to include a nag message too.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* FT2232: bulidfixSpencer Oliver2010-03-151-1/+1
| | | | | | Fix build issue with commit c23d4596d2239bdbba080499de837f53e0c89e59 Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* rename jtag_interface_{init,quit}()David Brownell2010-03-144-18/+21
| | | | | | | These routines apply to non-JTAG debug adapters too. To reduce confusion, give them better (non-misleading) names. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* FT2232: lookup and save layout just onceDavid Brownell2010-03-141-31/+39
| | | | | | | | | | | | | | Streamline use of the layout: have the "ft2232_layout" command look it up and save the result, instead of having a few different chunks of code looking it up later, and saving just its name (which is already part of the layout). This - is cleaner - reports errors sooner - facilitates earlier adapter-specific setup - removes unused "default to "usbjtag" logic Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* fix xscale icache and dcache commandsMike Dunn2010-03-111-3/+3
| | | | | | | | | Simple patch that fixes the broken xscale icache and dcache commands. This broke when the helper functions and macros were changed. [ dbrownell@users.sourceforge.net: don't use strcasecmp ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* versaloon cleanup patchDavid Brownell2010-03-111-321/+271
| | | | | | | | | | | | | Remove undesirable - backslashes at end-of-line; - initializations of BSS data to zero/NULL; - overlong lines (80+ characters) - whitespace issues - brackets around single-line statements And other minor issues reported by the Linux "checkpatch" utility Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* New JTAG driver for Versaloonsimon qian2010-03-111-1072/+304
| | | | | | | | | | This patch greatly simplifies the Versaloon driver: - reducing the code size from more than 50K to less than 28K - adding support for IR/DR scan with unlimited size - using tap_get_tms_path and tap_get_tms_path_len. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Add support for Bus Pirate as a JTAG adapter.Michal Demin2010-03-113-0/+978
| | | | | | | | This includes a driver and matching config file. This support needs to be enabled through the initial "configure" (use "--enable-buspirate"). Signed-off-by: Michal Demin <michaldemin@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* split "interface" commands from "jtag" onesDavid Brownell2010-03-113-5/+27
| | | | | | | | | | | | | | | | | | | | | | | | | We'll need to be able to work with debug adapter interfaces (drivers) even when they're not used for JTAG ... for example, while there are multi-transport drivers which support JTAG *and* several other transports (or just one more, like SWD) there are also adapters with more limited goals (and no JTAG support at all). Start decoupling the two concepts ("debug adapter driver", "jtag") by having two command groups, which initialize separately. This will help us support OpenOCD sessions using only non-JTAG transports, in which JTAG commands should not be registered. Update docs to mention that the JTAG, SVF, and XSVF commands won't work without a JTAG transport. Note that at least commands working with SRST are still inappropriately coupled to JTAG ... inappropriate because (a) SRST is not part of the JTAG standard, for all that many platforms (like ARM) expect it; and also (b) because they're used with non-JTAG debug and programming interfaces, too. They should perhaps become generic "interface" operations at some point. (Similarly with the clock rate to be used by a given adapter.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* MIPS: make fixed code arrays static constSpencer Oliver2010-03-101-3/+3
| | | | Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* JLINK: user info message cleanupSpencer Oliver2010-03-101-29/+46
| | | | | | | - remove trailing LF's from user info messages. - split long lines. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* PIC32: add flash algorithm supportSpencer Oliver2010-03-105-471/+234
| | | | | | | | | | | | | Add flash algorithm support for the PIC32MX. Still a few things todo but this dramatically decreases the programing time, eg. approx programming for 2.5k test file. - without fastload: 60secs - with fastload: 45secs - with fastload and algorithm: 2secs. Add new devices to supported list. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* STM32: flash loader cleanupSpencer Oliver2010-03-101-12/+25
| | | | | | - make algorithm array static const. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* STR7: flash loader cleanupSpencer Oliver2010-03-101-14/+30
| | | | | | | - make algorithm array static const. - increase algorithm buffer size to 32k. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* STR9: flash loader cleanupSpencer Oliver2010-03-102-8/+19
| | | | | | | - make algorithm array static const. - increase algorithm buffer size to 32k. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* ADUC702x: flash loader cleanupSpencer Oliver2010-03-101-1/+1
| | | | | | - make algorithm array static const. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* CFI CORE: bug-fix protect single sectorAntonio Borneo2010-03-091-2/+2
| | | | | | | | Cannot protect or unprotect single sector in cfi flash. When first==last the procedure fails. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* move a constant table to .rodata sectionDavid Brownell2010-03-081-1/+1
| | | | | | | | | The table of command registration functions shouldn't be in writable memory, where stray pointers can clobber it. Also, it shouldn't be initialized at runtime; that just consumes needless code space. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* cfi: simplify and clearify codeAntonio Borneo2010-03-081-149/+75
| | | | | | | | | | | | | | | | At the end I have added comments /* FIXME: to be removed */ There are 3 lines in which my simplification is not complete due to data dependency with LOG_DEBUG() messages visible in the patch. Such log_debug has been introduced on Jan 22, 2007 with commit 4fc97d3f2726efa147cfdb0c456eace51550e1e3 during development activity in this file/procedure. From my point of view, these logs can be removed, since not part of a consistent flow of information. Alternatively, could be borrowed in the new cfi_send_command(), but this will increase verbosity. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* zy1000: embedded ice dcc tweakØyvind Harboe2010-03-081-21/+48
| | | | | | | | | | How many bits to shift out before/after enabled tap not in bypass is calculated outside the loop. This is more of a demonstration of principle and to clarify code than a performance optimisation as such. Follows up a bit on the simplification work in jtag interface. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
generated by cgit v1.2.3 (git 2.46.0) at 2024-11-04 15:46:03 +0000