summaryrefslogtreecommitdiff
path: root/src
Commit message (Collapse)AuthorAgeFilesLines
* Added support for the Lisa/L jtag LEDs.Piotr Esden-Tempski2010-08-131-1/+56
|
* Added support for Lisa/L builtin JTAG interface.Piotr Esden-Tempski2010-08-131-0/+5
|
* jtag: fix handling of 'tap enable' errorThomas Koeller2010-08-121-2/+2
| | | | | | | | if a tap could not be _enabled_, the error message was 'failed to disable tap'. Fixed that. Also, display the failing tap's name. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
* str9x: faster flash erase of entire chipFredrik Hederstierna2010-08-121-6/+23
| | | | | | | The patch improves flash erase for STR9x in case of a full bank erase. Then the chip erase command is used instead which improves speed significantly. Also I think it might help if e.g. STR912 enters some state where flash banks are locked, and a chip erase command is the key for unlocking the flash.
* tcl: remove silly ocd_ prefix to array2mem and mem2arrayØyvind Harboe2010-08-111-2/+2
| | | | | | | | ocd_ prefix is used internally in OpenOCD as a kludge more or less to deal with the two kinds of commands that OpenOCD has. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* debug: use assert's when approperiateØyvind Harboe2010-08-112-4/+2
| | | | | | error was returned instead of using assert. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* arm: add missing error reportingØyvind Harboe2010-08-113-1/+28
| | | | | | | when an unknown core mode is read from the target, report error. Can be communication failure. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* arm7/9: fix "reset run + halt"Øyvind Harboe2010-08-092-11/+27
| | | | | | | | | | | | | | | | if polling is off, then "reset run + halt" would fail since halt incorrectly assumed the target was in the reset state as it is the internal poll implementation that moves the sw tracking of the target state out of the reset state. To reproduce: > reset run; halt JTAG tap: zy1000.cpu tap/device found: 0x1f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x1) BUG: arm7/9 does not support halt during reset. This is handled in arm7_9_assert_reset() Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* target: if polling fails, back offØyvind Harboe2010-08-091-8/+29
| | | | | | | | | | | | back-off algorithm for polling. Double polling interval up to 5000ms when it fails. when polling succeeds, reset backoff. This avoids flooding logs(as much) when working with conditions where the target polling will fail. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* verify_image: print out a statement that there are no further errorsØyvind Harboe2010-08-021-1/+10
| | | | | | | | | It is useful to know that the printed errors are *all* the errors there were. Added missing error handling(found by inspection). Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* zy1000: use correct base clock when calculating speed divisorØyvind Harboe2010-08-021-4/+11
| | | | | | revc uses 60MHz and revb 64MHz, use this in calculations. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* zy1000: print out khz correctly in response to setting JTAG speedØyvind Harboe2010-08-021-4/+33
| | | | | | Calculate printout based on same core routines. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* ioutil: fix internal fn namesØyvind Harboe2010-08-021-15/+11
| | | | | | prefix w/ioutil_ Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* jtag: measure_clk debug procØyvind Harboe2010-08-021-0/+9
| | | | | | | It can be useful to get an approximate measurement of rtck frequency for debugging purposes. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* jtag: add jtag_flush_queue_sleep debug commandØyvind Harboe2010-08-023-0/+45
| | | | | | | | it can be useful to throttle performance: test differences in behavior, test performance effect of long roundtrips. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* util: ms command to calculate length of operationsØyvind Harboe2010-08-015-2/+101
| | | | | | | This can be used to calculate approximate RTCK frequency for instance. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* stellaris flash comment updateDavid Brownell2010-08-011-1/+1
| | | | | | | | This flash driver works on more than just two chips. (Though it does need work still, e.g. to protect more than 64K. (On non-'3748-A0 chips where errata allow that.)) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* "transport select" returns Jim valueDavid Brownell2010-07-241-41/+30
| | | | | | | Make it scriptable, so code can be conditionalized based on what transport is in use for the session. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Buspirate: fix shadowMichal Demin2010-07-231-14/+14
|
* flash: remove algorithm exit_point address for supported targetsSpencer Oliver2010-07-204-5/+4
| | | | | | | | | For the above targets the exit_point is optional when used with run_algorithm, so remove it. This makes updating the algorithm less error prone. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* mips32: exit_point optional for mips32_run_algorithmSpencer Oliver2010-07-201-1/+1
| | | | | | | | | As the mips32 uses instruction breakpoints for algorithms we do not really need to check the pc on exit. This now matches the behaviour of the arm codebase. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* armv7m: exit_point optional for armv7m_run_algorithmSpencer Oliver2010-07-201-1/+1
| | | | | | | | | As the armv7m uses instruction breakpoints for algorithms we do not really need to check the pc on exit. This now matches the behaviour of the arm4_5 codebase. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* armv4_5: add algorithms instruction breakpoint supportSpencer Oliver2010-07-201-6/+16
| | | | | | | Update the arm_checksum_memory and arm_blank_check_memory algorithms to use a breakpoint instruction on v5 arch. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* arm11 error propagation fixesØyvind Harboe2010-07-203-29/+32
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* arm_jtag_scann error propagation fixesØyvind Harboe2010-07-205-12/+34
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* arm_dpm: error propagation fixesØyvind Harboe2010-07-191-2/+26
| | | | | | found by inspection Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* adi_jtag_ error propagationØyvind Harboe2010-07-191-4/+12
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* arm: error propagation of arm_jtag_set_instrØyvind Harboe2010-07-1910-32/+108
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* arm_adi_v5: dap_run() error propagationØyvind Harboe2010-07-191-15/+28
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* arm_adi_v5: mem_ap_write error propagationØyvind Harboe2010-07-192-25/+78
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* arm_adi_v5: error propagation of mem_ap_read_atomic_u32 failureØyvind Harboe2010-07-192-26/+73
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* mem_ap_read_u32 error propagationØyvind Harboe2010-07-192-16/+48
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* arm_adi_v5: add error propagation for dap_setup_accessportØyvind Harboe2010-07-192-15/+45
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* debug: debug entry error propagationØyvind Harboe2010-07-1911-41/+116
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* cortex a8: added timeout handlingØyvind Harboe2010-07-191-5/+28
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* arm: add error propagation for enable/disable mmu cachesØyvind Harboe2010-07-198-65/+162
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* arm: add error propagation to generic get_ttb fnØyvind Harboe2010-07-198-18/+46
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* more careful luminary initDavid Brownell2010-07-191-7/+12
| | | | | | | | | | | Set up more of the Luminary-specific signals, and stop cloning a few of the JTAG defaults. More comments too. Still leaves the "dap info 0" bugs unresolved (presumably coupled to this particular adapter family) where TPIU, ITM, DWT, and other debug modules wrongly display as extra NVICs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* flash: add nuc910 nand driverSpencer Oliver2010-07-194-2/+306
| | | | | | | | This adds a nand driver support for the nuc910 target. Note that ECC is not currently supported by this driver, although it is supported by the peripheral. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* nand: nand probe also outputs manufacturerSpencer Oliver2010-07-191-1/+2
| | | | | | The nand probe now outputs the manufacturer if found. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* cortex a8: lots of error propagation fixesØyvind Harboe2010-07-191-18/+53
| | | | | | found by code inspection Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* cortex a8: mem_ap_read_buf_u32() error handlingØyvind Harboe2010-07-191-1/+3
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* cortex a8: add missing error handling for ↵Øyvind Harboe2010-07-191-3/+9
| | | | | | cortex_a8_dap_write/read_coreregister_u32() Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* cortex a8: add missing error handling from cortex_a8_exec_opcode()Øyvind Harboe2010-07-191-13/+52
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* cortex a8: add missing error handling for mem_ap_atomic_write_u32()Øyvind Harboe2010-07-191-1/+5
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* cortex a8: add missing error handling for mem_ap_read_atomic_u32()Øyvind Harboe2010-07-191-0/+11
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* comments for Luminary ICDI layoutDavid Brownell2010-07-181-3/+27
| | | | | | | Provide $defines for more of the signals involved in the Luminary ICDI hardware, and comment some of what's going on. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* spelling fixes in commentsØyvind Harboe2010-07-181-5/+5
| | | | Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* debug-feature: jtagtcpip, improve jtag performanceØyvind Harboe2010-07-182-4/+76
| | | | | | postpone callbacks until jtag execute queue time. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
* ARM ADI-V5: cleanup CID/PID addressingDavid Brownell2010-07-161-21/+23
| | | | | | | | | | | Use addition for offsetting, not masking. Shorten some lines. Make "component_start" print-only (unused otherwise; don't save). Still doesn't resolve the issue where multiple components are wrongly displaying as NVICs on some Cortex-M3 parts because many PIDs appear to be zeroes ... maybe adapter related?? Signed-off-by: David Brownell <db@helium.(none)>