summaryrefslogtreecommitdiff
path: root/tcl/target
Commit message (Expand)AuthorAgeFilesLines
* stm32: set default soft reset configSpencer Oliver2010-12-031-0/+4
* config: fix luminary jtag configSpencer Oliver2010-12-021-3/+0
* rename some target scripts to be consistent with the restFreddie Chopin2010-12-023-0/+0
* FLASH/NOR: rename from spearsmi to stmsmiAntonio Borneo2010-11-231-1/+1
* STR750: Add SMI interface supportAntonio Borneo2010-11-231-0/+12
* TCL scripts: replace "puts" with "echo"Antonio Borneo2010-11-097-131/+131
* lpc3131: target definitionAndrew Leech2010-11-091-0/+76
* TCL scripts: add support for ST SPEAr310Antonio Borneo2010-11-061-0/+41
* CortexA8: Introduce Freescale i.MX51 variantMarek Vasut2010-11-051-0/+51
* Make systesetreq typos read sysresetreq insteadPeter Stuge2010-10-251-1/+1
* Remove srst_pulls_trst from LPC1768 targetPeter Stuge2010-10-251-3/+0
* swj-dp.tcl (SWD infrastructure #1)David Brownell2010-10-103-1/+44
* Fix omap3_dbginit to write to physical memory.Zachary T Welch2010-09-261-1/+1
* TCL scripts: collect duplicated proceduresAntonio Borneo2010-09-213-35/+3
* AM/DM37x: Unify configuration scripts and add support for TI Beagleboard xM.Karl Kurbjun2010-09-201-0/+203
* board scripts: Marvell PXA270M processor has a new TAPID: 0x89265013Takács Áron2010-09-141-1/+7
* cortex m3: add cortex_m3 reset_config cmdSpencer Oliver2010-08-311-6/+37
* cfg: update Luminary config filesSpencer Oliver2010-08-314-101/+7
* imx35pdk: fix clock and reset delaysØyvind Harboe2010-08-191-0/+1
* mcb1700: Keil MCB1700 w/1768 config scriptØyvind Harboe2010-08-171-12/+4
* avr32: basic target scriptOleksandr Tymoshenko2010-08-151-0/+18
* at32ap7000 config fileDavid Brownell2010-08-151-0/+16
* lpc1768: turn down the jtag clockØyvind Harboe2010-08-131-7/+9
* DM36x: Set OSCDIV dividerThomas Koeller2010-08-121-0/+7
* DM36x: Disable unused SYSCLKsThomas Koeller2010-08-121-1/+20
* DM36x: Use enable bit for PLL pre-dividerThomas Koeller2010-08-121-1/+1
* tcl: remove silly ocd_ prefix to array2mem and mem2arrayØyvind Harboe2010-08-112-5/+5
* config scripts: remove useless reference to OpenOCD docsØyvind Harboe2010-08-118-24/+0
* cfg: add omapl138 support and da850evm preliminary supportBen Gardiner2010-08-101-0/+66
* lpc1768: even if rclk "works", it isn't necessarily the correct clkØyvind Harboe2010-08-021-2/+6
* Remove srst_pulls_trst from LPC2148 targetPeter Stuge2010-08-011-1/+1
* lpc7168: make flash available upon reset initØyvind Harboe2010-07-301-0/+19
* lm3s811-ek uses generic stellaris target configDavid Brownell2010-07-171-29/+0
* cfg: add Avalue RSC-W910 configSpencer Oliver2010-07-131-0/+27
* at91sam3s* supportOlaf Lüke2010-06-253-36/+73
* DM36x: pll & clock setupThomas Koeller2010-06-151-0/+127
* arm1136 scriptsmichal smulski2010-06-151-1/+2
* cfg: add pic32 virtual banksSpencer Oliver2010-05-261-0/+7
* There are no variants of arm7tdmi targetFreddie Chopin2010-05-247-7/+7
* All LPC2xxx chips are little endian and that cannot be changed - update confi...Freddie Chopin2010-05-247-53/+8
* add correct CPUTAPID value for LPC2129Freddie Chopin2010-05-241-6/+2
* Update "flash bank" helper comments for LPC2xxx chipsFreddie Chopin2010-05-248-7/+8
* LPC23xx and LPC24xx after reset run on internal 4MHz RC oscillator, so "flash...Freddie Chopin2010-05-241-1/+1
* at91sam9260: use RCLKØyvind Harboe2010-05-211-19/+12
* at91rm9200 : reset_config should go to the board config fileMarc Pignat2010-05-181-2/+0
* scripts: update flash bank namesSpencer Oliver2010-05-136-12/+12
* telo: update configuration scripts to matched master branchmichal smulski2010-04-243-64/+3
* TCL scripts: update to current "flash bank" syntaxAntonio Borneo2010-03-261-1/+1
* PIC32: add Microchip Explorer16 cfgSpencer Oliver2010-03-161-4/+1
* rename jtag_nsrst_assert_width as adapter_nsrst_assert_widthDavid Brownell2010-03-151-1/+1
generated by cgit v1.2.3 (git 2.46.0) at 2024-11-16 17:04:34 +0000