summaryrefslogtreecommitdiff
path: root/tcl
Commit message (Collapse)AuthorAgeFilesLines
* remove "-ircapture 0x1 -irmask 0x1" from stm32.cfgFreddie Chopin2009-11-011-2/+5
| | | | | | | | Gets rid of the runtime warning "stm32.bs: nonstandard IR mask" [dbrownell@users.sourceforge.net: line lengths, note issue, section ref] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* target.cfg: use $_TARGETNAME for flashFreddie Chopin2009-10-3113-13/+13
| | | | | | | | | This gets rid of runtime warnings from the use of numbers. STM32 and LPC2103 were tested. Other LPC updates are the same, and so are safe. The CFI updates match other tested changes now in the tree. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Olimex FT2232H JTAG adaptersDimitar Dimitrov2009-10-292-0/+22
| | | | | | | | Add interface configs for two new high speed JTAG adapters from Olimex. They need some other speed related tweaks to work well at high speed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Signalyzer: H2 and H4 supportOleg Seiljus2009-10-271-1/+1
| | | | | | | | | | This patch includes partial support for these new JTAG adapters. More complete support will require updates to the libftdi code, for EEPROM access. [dbrownell@users.sourceforge.net: fix whitespace, linelen, etc ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Signalyzer: new config filesOleg Seiljus2009-10-273-0/+33
| | | | | | Add configs for H2, H4, LITE. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* PXA255: force reset configDavid Brownell2009-10-261-0/+4
| | | | | These chips need both SRST and TRST when debugging, and SRST doesn't gate JTAG.
* omap3530: target reset/init improvementsDavid Brownell2009-10-261-15/+25
| | | | | | | | | | | | | | | | | Now I can issue "reset halt" and have everything act smoothly; the vector_catch hardware is obviously not kicking in, but the rest of the reset sequence acts sanely. - TAP "setup" event enables the DAP, not omap3_dbginit (resolving a chicken/egg bug I noted a while back) - Remove stuff from omap3_dbginit which should never be used in event handlers - Cope better with slow clocking during reset Also, stop hard-wiring the target name: use the input params in the standard way, and set up $_TARGETNAME as an output param. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* Fix incorrect line endingsSpencer Oliver2009-10-261-17/+17
| | | | Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
* balloon3 board base configWookey2009-10-261-0/+13
| | | | | | | | | | | This is the very basic board config for the balloon3 board cpu JTAG channel. The rest of the config comprises another 14 .cfg files which I suspect openocd doesn't really want all of. I'm still not sure how to deal with this. I'll post another mail/patch to discuss. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* fix syntax of mww phys.Øyvind Harboe2009-10-255-44/+44
|
* mww_phys retired. Replaced by generic mww phys in target.cØyvind Harboe2009-10-215-44/+44
|
* Added the faux flash driver and target. Used for testing.Øyvind Harboe2009-10-201-0/+29
|
* davinci: add watchdog reset methodDavid Brownell2009-10-191-1/+62
| | | | | | Lightly tested on dm365. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* SDRAM and clock configuration for the SAM9-L9260 board from OlimexDean Glazeski2009-10-181-6/+85
|
* Fw: [PATCH] OpenRD board configurationWookey2009-10-142-0/+134
| | | | | | | | | | | | | | | | | Ofrwarded from Ron, who's not subscribed. ----- Forwarded message from Ron <ron@debian.org> ----- From: Ron <ron@debian.org> Date: Wed, 14 Oct 2009 04:50:17 +1030 To: wookey@debian.org Subject: [PATCH] OpenRD board configuration X-Spam-Status: No, score=-3.6 required=4.5 tests=BAYES_00,RCVD_IN_DNSWL_LOW autolearn=ham version=3.2.5 This piggybacks on the 'sheevaplug' layout which uses the same Kirkwood SoC. Signed-off-by: Ron Lee <ron@debian.org>
* iMX target config script's ported from Freescale BSP.Øyvind Harboe2009-10-143-65/+57
|
* omap2420.cfg updatesDavid Brownell2009-10-141-5/+6
| | | | | | Remove ircapture/mask attributes. Add "srst_nogate". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* arm11 seems to gate JTAG when srst is assertedØyvind Harboe2009-10-132-3/+2
|
* Xilinx xcr3256.cfg basic config scriptWookey2009-10-121-0/+3
|
* burst writes work fine. clean up junk.Øyvind Harboe2009-10-121-3/+0
|
* Merge commit 'origin/master'Øyvind Harboe2009-10-121-7/+12
|\
| * Fix reset delays and tinker with ID'sWookey2009-10-101-7/+12
| |
* | Supply default reset_config statement to make target scripts useful ↵Øyvind Harboe2009-10-122-1/+4
|/ | | | standalone and provide sensible default
* Merge commit 'origin/master'Øyvind Harboe2009-10-091-3/+32
|\
| * make PXA255 targets enumerate sort-of-OKDavid Brownell2009-10-081-3/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Startup now mostly works, except that the initial target state is "unknown" ... previously, it refused to even start. Getting that far required fixing the ircapture value (which can never have been correct!) and the default JTAG clock rate, then providing custom reset script. The "reset" command is still iffy. DCSR updates, and loading the debug handler, report numerous DR/IR capture failures. But once that's done, "poll" reports that the CPU is halted (which it shouldn't be, this was "reset run"!), due to the rather curious reason "target-not-halted". Summary: you still can't debug these parts, but it's closer. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* | Added tip in documentation on how to translate quirky syntaxØyvind Harboe2009-10-091-0/+3
|/
* Function to flash SheevaPlug u-boot sectorsRabeeh Khoury2009-10-081-0/+11
| | | | | This function is used by the SheevaPlug installer to flash the erase and re-flash the U-Boot environment in the NAND Flash.
* initial builds of OSK5912 boards need srst_pulls_trstDavid Brownell2009-10-081-0/+4
| | | | | | | | | | | | This is clearly noted in the hardware spec (section 5.2.3); it works around a chip erratum: "If the MPU_RESET signal is used, it may cause the EMIFS bus to lock." I seem to have a board with such an initial build. The chip is labeled XOMAP. Presumably, parts without that "X" prefix (eXperimental) resolve this. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* make OMAP5912 resets more reliableDavid Brownell2009-10-071-0/+2
| | | | | | | Without some extra delay after releasing SRST, we seemed to be trying to talk to the TAP before it was ready to respond. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* iMX25 target supportJohn Rigby2009-10-071-0/+41
| | | | Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* first stab at imx35 reset init scriptoharboe2009-10-071-0/+272
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2817 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* remove recrusive reset invocation from reset init callbackoharboe2009-10-071-5/+0
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2816 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Add basic support for DM6446 EVM board.dbrownell2009-10-061-0/+74
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2808 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Dragonite target scriptdbrownell2009-10-061-0/+31
| | | | | | | From: Nicolas Pitre <nico@fluxnic.net> git-svn-id: svn://svn.berlios.de/openocd/trunk@2806 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* stop using targetnumoharboe2009-10-061-1/+1
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2804 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Add a new JTAG "setup" event; use for better DaVinci ICEpick support.dbrownell2009-10-053-21/+28
| | | | | | | | | | | | | | | | | The model is that this fires after scanchain verification, when it's safe to call "jtag tapenable $TAPNAME". So it will fire as part of non-error paths of "init" and "reset" command processing. However it will *NOT* trigger during "jtag_reset" processing, which skips all scan chain verification, or after verification errors. ALSO: - switch DaVinci chips to use this new mechanism - log TAP activation/deactivation, since their IDCODEs aren't verified - unify "enum jtag_event" scripted event notifications - remove duplicative JTAG_TAP_EVENT_POST_RESET git-svn-id: svn://svn.berlios.de/openocd/trunk@2800 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Get rid of needless OMAP and Davinci target config optionsdbrownell2009-10-055-38/+13
| | | | | | | so they provide better examples and are easier to maintain. git-svn-id: svn://svn.berlios.de/openocd/trunk@2797 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Updated reset event handling in omap3530 cfgmlu2009-10-021-2/+7
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2796 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Remove annoying EOL whitespace (again, sigh).dbrownell2009-09-307-69/+69
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2781 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* strip gdb config optionsoharboe2009-09-302-9/+0
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2779 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* michal smulski <michal.smulski@ooma.com> reset now worksoharboe2009-09-303-67/+212
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2778 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Don't provide invalid OMAP5912 IR capture value/mask attributesdbrownell2009-09-271-3/+3
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2762 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* On DM355 EVM board, associate NAND chips with $_TARGETNAMEdbrownell2009-09-261-2/+2
| | | | | | | instead of a target number. git-svn-id: svn://svn.berlios.de/openocd/trunk@2761 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Update DM355 target config to know about ICEpick.dbrownell2009-09-251-5/+18
| | | | | | | Still defaults to nonstandard EMU0/EMU1 settings. git-svn-id: svn://svn.berlios.de/openocd/trunk@2757 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Michael Hasselberg <mh@open-engineering.de> target configuration files for ↵oharboe2009-09-254-0/+355
| | | | | | Toshiba TX09 familiy git-svn-id: svn://svn.berlios.de/openocd/trunk@2756 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Remove annoying end-of-line whitespace from tcl/* filesdbrownell2009-09-2185-683/+682
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2743 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Ethan Eade <ethan@evolution.com> board config script for Cogent CSB732 ↵oharboe2009-09-211-0/+71
| | | | | | i.MX35 (arm1136) git-svn-id: svn://svn.berlios.de/openocd/trunk@2741 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Ensure that DaVinci chips can't start with a too-fast JTAG clock.dbrownell2009-09-213-0/+18
| | | | | | | | | | It can be sped up later, once it's known the PLLs are active. Note that modern tools from TI all use adaptive clocking; and that if that's done with OpenOCD, "too fast" is also a non-issue. git-svn-id: svn://svn.berlios.de/openocd/trunk@2740 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Reduced sleep time after reset mlu2009-09-191-1/+2
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2732 b42882b7-edfa-0310-969c-e2dbd0fdcd60
* Move Cortex A8 debug access initialisation from omap3530.cfg to cortex_a8.cmlu2009-09-181-18/+3
| | | | git-svn-id: svn://svn.berlios.de/openocd/trunk@2728 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3 (git 2.46.0) at 2024-11-16 17:06:16 +0000